Disclaimer:Your warranty is now void. Please read the post before asking questions, if you do not read the post and ask questions they will not be answered.
I am not responsible if you use this and brick your device or if your device blows up, implodes. Follow the instructions and you should be good.This is stock ROM with modifications.You must have an Unlocked Boot loader. This is only for SM-G981U, SM-G981U1 and SM-G981W. ALWAYS BACKUP YOU’RE DATA BEFORE FLASHING.Instructions:• Download the zip file.• Put the ROM.tar in AP slot with Odin.• Reboot• Wipe data• Enjoy!• Any Issues let me know!ROM FEATURES:- You will need to flash safety net fix from github.- 90 plus fonts - 3 Minit Battery and Clock Added- Circle Battery- Network Speed Options- Few others- ViPER4AndroidFX included just install drivers and everything works- Force Encryption Off All ROMS- Heavily Debloated- Bluetooth, Screenshare and Shealth working.- Disable shutter sound menu- AppLock Protection menu- Support RealTime Network Speed- Enable Camera during call- Voicecall recording- Data usage view on quick panel- Block call number menuSEE POST 2 FOR ROM DOWNLOAD LINKSTelegram BKLYNROMs To get your phone unlocked see this thread or @afaneh92 UnlockTWRP Thanks to @afaneh92
BKLYN Kernel Source >> SM-G988U
Donations are not required but are encouraging, If want to support my work just click Here
Changelog
01/22/2022 BKLYN_S20_ROM_A12_V_1.0.0
Download Link >> BKLYN_S20_ROM_A12_V_1.0.0
Based on : G981USQU2EULH
Post3
bklyn_syed said:
Post3
Click to expand...
Click to collapse
Great Rom. Working Flawless.
Thank You For this, Love for the s20.
gavilan2010 said:
Great Rom. Working Flawless.
Thank You For this, Love for the s20.
Click to expand...
Click to collapse
You welcome
Hey I notice in the settings you have scripts to debloat the rom further. Does the Bixby and other debloat stuff require reboots or anything else to work?
I'd love to permanently get rid of Bixby.
Thanks it work well.
ChongoDroid said:
Hey I notice in the settings you have scripts to debloat the rom further. Does the Bixby and other debloat stuff require reboots or anything else to work?
I'd love to permanently get rid of Bixby.
Click to expand...
Click to collapse
It just disables bixby and other apk. You have to turn off and turn it back on in order for it to work
bklyn_syed said:
It just disables bixby and other apk. You have to turn off and turn it back on in order for it to work
Click to expand...
Click to collapse
Hmm I tried every combination and it's still there. Using a 981w btw if it makes a difference.
ChongoDroid said:
Hmm I tried every combination and it's still there. Using a 981w btw if it makes a difference.
Click to expand...
Click to collapse
Can you make sure there are files etc/bk, it shouldn't matter I did test it on S20 Ultra
bklyn_syed said:
Can you make sure there are files etc/bk, it shouldn't matter I did test it on S20 Ultra
Click to expand...
Click to collapse
Yeah for some reason the script won't execute. I just copied the script and executed it in terminal and worked fine.
Weird
Tested and works. Any idea how to remove carrier name in status bar?
mattrb said:
Tested and works. Any idea how to remove carrier name in status bar?
Click to expand...
Click to collapse
Go to bk_settings apk go to status bar options make sure carrier label on lockscreen status bar is hide
is device encryption working ?
D3F0NC3UR said:
is device encryption working ?
Click to expand...
Click to collapse
Its turned off by default you can turn it on
BKLYN_S20_ROM_V1.1.0 based on G981USQU1DUCB. Remove your password/pin before flashing.
the button to open screen not working with 1.1 version
D3F0NC3UR said:
the button to open screen not working with 1.1 version
Click to expand...
Click to collapse
It shouldn't be any issues because s20 and ultra have the same system ui and framework. I am using same stuff on ulta. You can send me a PM with the issues
Failed, odin shows:
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> abl.elf.lz4
<ID:0/004> Complete(Write) operation failed.
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
sslh2017 said:
Failed, odin shows:
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> abl.elf.lz4
<ID:0/004> Complete(Write) operation failed.
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Are you using modify odin it doesn't look like you are
Related
Hi guys,
I have bricked my tablet, when i try to "Nand Erase All" it keeps failing, can someone explain the problem
Odin Log:
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Erase...
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
---------------------------------------------------------------------
Status:
-Device: Galaxy Note 10.1 N8000, not rooted, Debugging mode disabled so no ADB:crying:
-Bootloop, No recovery mode, Can access Download mode:good:
----------------------------------------------------------------------
What I have tried so Far
- Removed the battery ( didn't work)
- Flashed bootloader --> (Flashed Successfully but didn't work)
- Flashed CWM recovery -->(Flashed Successfully, battery off then on, but didn't work, still cant access recovery mode)
- Flashed Stock firmware -->(Flashed Successfully but didn't work)
-Flashed (Stock/custom recovery) with Pit file re-partition checked --> (Repartitioned and Flashed Successfully but didn't work)
-I read about that I need to check "Nand Erase ALL" ( with Pit file on) to erase cache and every corrupted file
so I tried but I kept failing giving the error mentioned above, So any explanation why "Nand Erase All" fails, and any other suggestions for my current situation
Thanks in advance
scorpiohyena said:
Hi guys,
I have bricked my tablet, when i try to "Nand Erase All" it keeps failing, can someone explain the problem
Odin Log:
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Erase...
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
---------------------------------------------------------------------
Status:
-Device: Galaxy Note 10.1 N8000, not rooted, Debugging mode disabled so no ADB:crying:
-Bootloop, No recovery mode, Can access Download mode:good:
----------------------------------------------------------------------
What I have tried so Far
- Removed the battery ( didn't work)
- Flashed bootloader --> (Flashed Successfully but didn't work)
- Flashed CWM recovery -->(Flashed Successfully, battery off then on, but didn't work, still cant access recovery mode)
- Flashed Stock firmware -->(Flashed Successfully but didn't work)
-Flashed (Stock/custom recovery) with Pit file re-partition checked --> (Repartitioned and Flashed Successfully but didn't work)
-I read about that I need to check "Nand Erase ALL" ( with Pit file on) to erase cache and every corrupted file
so I tried but I kept failing giving the error mentioned above, So any explanation why "Nand Erase All" fails, and any other suggestions for my current situation
Thanks in advance
Click to expand...
Click to collapse
Update:
currently I am using heimdall, Trying to create a Custom Pit to skip bad sectors in recovery and boot partitions, any experience in that would be helpfull.
I am trying to figure out the pit files parameter to create a custom working file
scorpiohyena said:
Update:
currently I am using heimdall, Trying to create a Custom Pit to skip bad sectors in recovery and boot partitions, any experience in that would be helpfull.
I am trying to figure out the pit files parameter to create a custom working file
Click to expand...
Click to collapse
Hi there did you had any success trying to unbrick your tablet ??, I'm experiencing the same issues as you.
I've a rooted Note 10.1 N8013 running on stock firmware.
I've tried everything, all left for me is trying "Nand erase all" . but it fails everytime
Thank you !!
hi gays
can you tell me if the problem of nand eras all fail was solved ?
During sending an SMS my phone hangs, and does not start anymore.
The phone is rooted. I tried to start recovery but nothing happens (Vol UP + Home + Power Key).
Odin is working by VOL Down + Home + Power Key, so i tried to flashTWRP recovery (https://dl.twrp.me/zerolte/twrp-3.0.2-0-zerolte.img.tar.html)
Which has worked:
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Removed!!
<ID:0/005> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
But I can still not start into Recovery(?)
I think the next steps is to try a full flash of complete image, right?
But can i download/backup some files from the phone without recovery, I don't want to loos all my data (if possible)
Are there any other procedures to try?
Best regards,
Tom
Now, I tried Smart Switch with recover option -> no success ;( Stuck on Samsung boot logo.
I think I need a new phone (any help?)
You can't backup anything without the phone on or recovery.
Try hold only POWER + VOL DOWN ONLY nothing else. This should force safe mode. If this doesn't boot up hold power and vol down again until it goes off then quickly switch to recovery mode combination. If this won't boot to recovery next thing is to flash stock firmware. But you will lose all data and it will flash a new recovery image.
What model is it and what region?
Thanks for your tips, unfortunatly it does not work -> Save mode also stuck on boot screen.
I also tried to flash stock firmware (G925FXXS4DPIF_G925FVFG4DPHB_G925FXXS4DPIF_HOME.tar) -> Same issue
Model: International Version: SM-G925F
Should I try to flash a new bootloader? Which one? What's about my EFS Backup?
offtopicfication said:
Thanks for your tips, unfortunatly it does not work -> Save mode also stuck on boot screen.
I also tried to flash stock firmware (G925FXXS4DPIF_G925FVFG4DPHB_G925FXXS4DPIF_HOME.tar) -> Same issue
Model: International Version: SM-G925F
Should I try to flash a new bootloader? Which one? What's about my EFS Backup?
Click to expand...
Click to collapse
http://www.sammobile.com/firmwares/download/106963/G925FXXS4DPJ2_G925FBTU4DPH1_BTU/
Try to download and flash this.
I don't think you will be able to get any data off the phone now. But if you flash the firmware i just posed it should work.
Try twrp again and make backup of efs
callumbr1 said:
http://www.sammobile.com/firmwares/download/106963/G925FXXS4DPJ2_G925FBTU4DPH1_BTU/
Try to download and flash this.
I dont think you will be able to get any data off the phone now. But if you flash the firmware i just posed it should work
Click to expand...
Click to collapse
I fear the worst... still no look to boot into recovery, after flashing the provided firmeware and installing twrp again.
I think its a hardware fault (ram/memory issue)
offtopicfication said:
I fear the worst... still no look to boot into recovery, after flashing the provided firmeware and installing twrp again.
I think its a hardware fault (ram/memory issue)
Click to expand...
Click to collapse
Did you flash the UK BTU firmware i just posted above? Does odin show any error messages? What happens after odin passes and phone boots?
callumbr1 said:
Did you flash the UK BTU firmware i just posted above? Does odin show any error messages? What happens after odin passes and phone boots?
Click to expand...
Click to collapse
Of course, flashed G925FXXS4DPJ2_G925FBTU4DPH1_G925FXXS4DPI9_HOME.tar with Odin3_v3.12.3 in "AP Mode" and default settings.
No errors in log - the phone reboots automatically after flashing, stops at
PHP:
Samsung
Galaxy
S6 edge
POWERED BY
android
boot logo
Phone is since to ours in this state, I can't even shut down the phone. Only reboot with "Vol Down + Power" or "Vol Down + Home + Power" works (till to the next reboot halting at boot logo)
offtopicfication said:
Of course, flashed G925FXXS4DPJ2_G925FBTU4DPH1_G925FXXS4DPI9_HOME.tar with Odin3_v3.12.3 in "AP Mode" and default settings.
No errors in log - the phone reboots automatically after flashing, stops at
PHP:
Samsung
Galaxy
S6 edge
POWERED BY
android
boot logo
Phone is since to ours in this state, I can't even shut down the phone. Only reboot with "Vol Down + Power" or "Vol Down + Home + Power" works (till to the next reboot halting at boot logo)
Click to expand...
Click to collapse
Try the same firmware again with this PIT file
https://drive.google.com/file/d/0BzyeAt2hy6XeaXhVSUlGYTNobE0/view
In odin insert the PIT into pit and check repartition. Try that
here is a photo of the halted boot screen
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
wow, fast response
callumbr1 said:
Try the same firmware again with this PIT file
https://drive.google.com/file/d/0BzyeAt2hy6XeaXhVSUlGYTNobE0/view
In odin insert the PIT into pit and check repartition. Try that
Click to expand...
Click to collapse
What is this PIT file?
I'm in a state I try everything (I have even ordered a new phone - S7) - but i would really happy if i can cancel that order :fingers-crossed:
Here is the log:
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> cm.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img
<ID:0/003> cache.img
<ID:0/003> hidden.img
<ID:0/003> modem.bin
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
<ID:0/003> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Stuck at boot logo :crying:
should I restart the phone or flash twrp?
offtopicfication said:
What is this PIT file?
I'm in a state I try everything (I have even ordered a new phone - S7) - but i would really happy if i can cancel that order :fingers-crossed:
Here is the log:
Click to expand...
Click to collapse
It just rebuilds the partitions. Try it to see if it works. Just put the firmware into AP and put the PIT into pit. Check f reset time, auto reboot and repartition.
callumbr1 said:
It just rebuilds the partitions. Try it to see if it works. Just put the firmware into AP and put the PIT into pit. Check f reset time, auto reboot and repartition.
Click to expand...
Click to collapse
I followed exactly your described steps, but still no behavior change...
offtopicfication said:
I followed exactly your described steps, but still no behavior change...
Click to expand...
Click to collapse
Hmmmm strange. Is your phone network locked?
callumbr1 said:
Hmmmm strange. Is your phone network locked?
Click to expand...
Click to collapse
no
offtopicfication said:
no
Click to expand...
Click to collapse
Whst region are you in?
Phone feels slightly warmish
callumbr1 said:
Whst region are you in?
Click to expand...
Click to collapse
Austria
I've been trying to flash the unlocked firmware and debrand and get rid of the bloat. But either gets stuck on Setupconnection or Initializing..
<ID:0/006> Odin engine v(ID:3.1301)..
<ID:0/006> File analysis..
<ID:0/006> Total Binary size: 6787 M
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006>
<ID:0/006> FAIL! (DeviceInfo)
I've also tried downgrading the version so i can sideload pie BUUUUT of course it does the same thing. I don't get it. I've ALWAYS had issues with Odin with ANY samsung device. I have windows 10. What's the deal here? I'm using the ATT variant of the S9+ I've read people saying OMG IT WORKS THANKS but I can't get odin to do anything but FAIL and get stuck on bloated firmware. And these threads tend to get ignored so I really hope someone has an idea.
I've ran it as admin. I've turned it on as admin THEN plugged the phone in. I've tried literally everything possible and it just fights me.
Are you putting the phone in download mode?
Odin has been around since the dinosaurs, and has been roc solid since then. You're doing something wrong, or have an issue somwhere on your end.
Are you enabling usb debugging on the phone and using the patched Odin?
the_scotsman said:
Are you putting the phone in download mode?
Odin has been around since the dinosaurs, and has been roc solid since then. You're doing something wrong, or have an issue somwhere on your end.
Click to expand...
Click to collapse
I've been modifying android devices since the captivate. yes its in download mode. It wouldn't read on odin if it wasn't.
YrrchSebor said:
Are you enabling usb debugging on the phone and using the patched Odin?
Click to expand...
Click to collapse
what will usb debugging do in download mode? Isn't that only useful in the system?
Konner920 said:
I've been modifying android devices since the captivate. yes its in download mode. It wouldn't read on odin if it wasn't.
Click to expand...
Click to collapse
EDIT: Put it BACK in download mode, put debugging on. Same issue. I'm not doing anything different than I always have using Odin. Ever since KNOX samsung phones have been a pain. I even installed a XP VM and it did the same thing, aswell as a windows 7 VM.
Konner920 said:
I've been modifying android devices since the captivate. yes its in download mode. It wouldn't read on odin if it wasn't.
Click to expand...
Click to collapse
So you're obviously using the correct version of Odin then I assume?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
the_scotsman said:
So you're obviously using the correct version of Odin then I assume?
Click to expand...
Click to collapse
Yes the patched Odin. I've tried so many different firmwares and NONE will flash.
and everytime.
<ID:0/006> Added!!
<ID:0/006> Odin engine v(ID:3.1301)..
<ID:0/006> File analysis..
<ID:0/006> Total Binary size: 6787 M
<ID:0/006> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Odin engine v(ID:3.1301)..
<ID:0/006> File analysis..
<ID:0/006> Total Binary size: 6787 M
<ID:0/006> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Odin engine v(ID:3.1301)..
<ID:0/006> File analysis..
<ID:0/006> Total Binary size: 6787 M
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
then it'll give a DeviceInfo error and fail.
Konner920 said:
what will usb debugging do in download mode? Isn't that only useful in the system?
Click to expand...
Click to collapse
That's what I thought but I was advised to enable it in the developer options. I flashed a Verizon s9 plus to the unlocked firmware with no issues at all, using that same Odin. I was also advised to choose a firmware that has the same bootloader version that the phone was currently on.
YrrchSebor said:
That's what I thought but I was advised to enable it in the developer options. I flashed a Verizon s9 plus to the unlocked firmware with no issues at all, using that same Odin. I was also advised to choose a firmware that has the same bootloader version that the phone was currently on.
Click to expand...
Click to collapse
How can I tell what bootloader version I have? It's just the firmware version for it in recovery
Konner920 said:
How can I tell what bootloader version I have? It's just the firmware version for it in recovery
Click to expand...
Click to collapse
The 5th number from the end is either 1,2, or 3. So I checked in the phone info app and currently I had 1, so I chose an unlocked firmware that also had a 1 there. It flashed fine, and then it got all the OTA updates to get up to the latest unlocked build. Hope you figure it out!
Oh, I was also advised to choose an XAA firmware, but I have no idea why or what that even really means. I think it just means it's completely carrier free. Also I used CSC rather than Home CSC
YrrchSebor said:
The 5th number from the end is either 1,2, or 3. So I checked in the phone info app and currently I had 1, so I chose an unlocked firmware that also had a 1 there. It flashed fine, and then it got all the OTA updates to get up to the latest unlocked build. Hope you figure it out!
Oh, I was also advised to choose an XAA firmware, but I have no idea why or what that even really means. I think it just means it's completely carrier free. Also I used CSC rather than Home CSC
Click to expand...
Click to collapse
My bootloader has a 3, and I don't see any XAA firmware with a 3 on the bootloader.
YrrchSebor said:
The 5th number from the end is either 1,2, or 3. So I checked in the phone info app and currently I had 1, so I chose an unlocked firmware that also had a 1 there. It flashed fine, and then it got all the OTA updates to get up to the latest unlocked build. Hope you figure it out!
Oh, I was also advised to choose an XAA firmware, but I have no idea why or what that even really means. I think it just means it's completely carrier free. Also I used CSC rather than Home CSC
Click to expand...
Click to collapse
I literally can't get it to do anything
<ID:0/004> Odin engine v(ID:3.1301)..
<ID:0/004> File analysis..
<ID:0/004> skip file list for home binary
<ID:0/004> apdp.mbn
<ID:0/004> msadp.mbn
<ID:0/004> persist.img.ext4
<ID:0/004> userdata.img.ext4
<ID:0/004> dqmdbg.img.ext4
<ID:0/004> Home Binary Download
<ID:0/004> Total Binary size: 4655 M
<ID:0/004> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
if I try without the home CSC it just says Setupconnection..
<OSM> All threads completed. (succeed 0 / failed 1)
I spam start til it says initializalize, and it FAILS with (Deviceinfo)
And I can't return this piece of **** cause best buy wants a 45 dollar restocking fee.
Konner920 said:
My bootloader has a 3, and I don't see any XAA firmware with a 3 on the bootloader.
Click to expand...
Click to collapse
The XAA is probably not crucial, but the bootloader number is I believe. Any luck yet?
Try to delete all android and samsung drivers on your PC. If you have Kies or smart switch uninstall it. Then start your phone in download mode and open odin. At least plug it into your PC and wait a few minutes, that Windows can find the drivers.
Are you launching ODIN as admimistrator? As in right click on it and selecting "runa as administrator "
Sent from my SM-G965U1 using Tapatalk
I ended up just taking it back for a refund, the razer phone 2 is under AT&T with no bloat so I'm waiting for my refund from best buy. I liked the phone, too much bloat and bixby is the most worthless assistant. It wasnt even worth trying to disable it, samsung lost their touch. I miss the old galaxy phones without KNOX and this bixby crap. so this can be closed.
had the same issue. Changed USB cable and all was good.
Konner920 said:
I've been trying to flash the unlocked firmware and debrand and get rid of the bloat. But either gets stuck on Setupconnection or Initializing..
<ID:0/006> Odin engine v(ID:3.1301)..
<ID:0/006> File analysis..
<ID:0/006> Total Binary size: 6787 M
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006>
<ID:0/006> FAIL! (DeviceInfo)
I've also tried downgrading the version so i can sideload pie BUUUUT of course it does the same thing. I don't get it. I've ALWAYS had issues with Odin with ANY samsung device. I have windows 10. What's the deal here? I'm using the ATT variant of the S9+ I've read people saying OMG IT WORKS THANKS but I can't get odin to do anything but FAIL and get stuck on bloated firmware. And these threads tend to get ignored so I really hope someone has an idea.
I've ran it as admin. I've turned it on as admin THEN plugged the phone in. I've tried literally everything possible and it just fights me.
Click to expand...
Click to collapse
i have the same problem, how to fix it? am i downloading the wrong firmware or i just did it wrong?
Same exact problem and history with Odin. Was a solution found for this?
Same exact problem.
All threads completed. (succeed 0 / failed 1)
Any knows solutions?
Hi,
I did a lot of trying to get twrp installed.
After a while I followed a hint and it worked but I lost Magisk.
After installing Magisk I got a bootloop. Magiskuninstaller didn't work and all other methods I know also didn't help.
Now I have only twrp working and maybe that's the only possibility to install anything, because in ODIN I always get failures
e.g.
Trying to install bootloader:
<ID:0/007> abl.elf
<ID:0/007> xbl.elf
<ID:0/007> xbl_config.elf
<ID:0/007> FAIL! (Auth)
and
<ID:0/007> Set PIT file..
<ID:0/007> DO NOT TURN OFF TARGET!!
<ID:0/007>
<ID:0/007> Re-Partition operation failed.
or, when I tick Re-Partition in options
<ID:0/007> Can't open the specified file. (Line: 2006)
any help would be appreciated
Firstly, and please forgive me for nitpicking in your time of dread, if your device can power on it is not bricked, despite what so many uninformed folks say; "bricked" means there is no way to get it to even power on. And since I'm in 'education mode' there is no such thing as "soft brick"; it's like saying something is "kinda dead", and there is no such things as zombies irl.
Anyways, have you tried resetting the tab in recovery mode? Good instructions here:
https://www.hardreset.info/devices/samsung/samsung-galaxy-tab-s6/recovery-mode/
TiTiB said:
Anyways, have you tried resetting the tab in recovery mode? Good instructions here:
https://www.hardreset.info/devices/samsung/samsung-galaxy-tab-s6/recovery-mode/
Click to expand...
Click to collapse
First: Thanks for your support
But: I'm in twrp recovery not in stock
and I cannot enter safe mode
any solution for this?
Tronje said:
First: Thanks for your support
But: I'm in twrp recovery not in stock
and I cannot enter safe mode
any solution for this?
Click to expand...
Click to collapse
I don't think I've had to use button combos while in TWRP, but their purpose is to *force* your device in to a certain state (in this case Recovery), no matter what state they are currently in. Usually in such cases where it looks like critical files or operations are messed up, common, and sound, advice is to get back to stock and then do, whatever.
Other than that, I'll have to defer to what others have to say. Good Luck!
or is there a way to do it via sideload?
it's totally crazy, nothing seemes to work
I was able to install stock boot image and stock recovery that I extracted from firmware that I downloaded from samfrew hopefully I could solve the problems with odin - but failed
I'm even not able to shut down the tablet when connected to powercable - there is a permanent bootloop
I was able to take some photos. Maybe someone will realize what else I could try to do. The large photo shows, what happened when I tried to sideload several versions of the downloaded firmware
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Tronje said:
or is there a way to do it via sideload?
it's totally crazy, nothing seemes to work
I was able to install stock boot image and stock recovery that I extracted from firmware that I downloaded from samfrew hopefully I could solve the problems with odin - but failed
I'm even not able to shut down the tablet when connected to powercable - there is a permanent bootloop
I was able to take some photos. Maybe someone will realize what else I could try to do. The large photo shows, what happened when I tried to sideload several versions of the downloaded firmware
View attachment 4988349
View attachment 4988351
View attachment 4988353
View attachment 4988355
Click to expand...
Click to collapse
I'm not an expert here by any means, but I think if you can get to fastboot/bootloader you can use ODIN to do a full restore. I would think you can also use fastboot to just restore the recovery partition as well.
ChrisDos said:
I'm not an expert here by any means, but I think if you can get to fastboot/bootloader you can use ODIN to do a full restore. I would think you can also use fastboot to just restore the recovery partition as well.
Click to expand...
Click to collapse
Dear,
did you really read my post?
I need real, detailled help because I'm always getting errors in Odin.
I think Odin is no longer an option.
Mostly it ends with an FAIL! (Auth)
or Re-Partition operation failed
or, when I tick Re-Partition in options: <ID:0/007> Can't open the specified file. (Line: 2006)
I was so desperate that I was looking for a PIT-file, who knows wherefore, but no success.
I ticked and unticked I think every possible options in Odin, tried several releases of firmware with several releases of Odin-Software and also different twrp releases.
My last hope was my old notebook, as I read, that sometimes there are differences in behaviour between some PC, but failed again.
Maybe a detailed instruction how and what to sideload or another PIT-File (I found only this one: GTS6L_EUR_OPEN.pit)
Maybe that's the problem: I'm using German firmware with European PIT? But I couldn't find European firmware oder German PIT
Tronje said:
Dear,
did you really read my post?
I need real, detailled help because I'm always getting errors in Odin.
I think Odin is no longer an option.
Mostly it ends with an FAIL! (Auth)
or Re-Partition operation failed
or, when I tick Re-Partition in options: <ID:0/007> Can't open the specified file. (Line: 2006)
Click to expand...
Click to collapse
Might want to use Frija to download the firmware. If ODIN is no longer an option, then all is lost. I highly doubt that is though. I've had issues with specific USB cables not working or a bad USB port. I wouldn't panic yet as TiTiB said. As long as you can get it to turn on and get to the bootloader, there should be a way to recover it.
Looks at the Tab 5Se, S10, note 10, etc threads on recoveries. The Tab S6 forums don't seem to be nearly as prolific as other forums.
I know you are at your wits end, but hang end there. Try using Frija to get the proper firmware. You might even try going back to the original or second release in August of last year. You key is going to be getting ODIN to do the work though. I also fine it ludicrous that the Samsung devices have so many different boot options using the keys. Evening the timing of pressing the buttons in a certain order is critical.
ChrisDos said:
Might want to use Frija to download the firmware.
Click to expand...
Click to collapse
ok, I did, downloaded, flashed with the same disappointing result
ChrisDos said:
If ODIN is no longer an option, then all is lost. I highly doubt that is though. I've had issues with specific USB cables not working or a bad USB port. I wouldn't panic yet as TiTiB said. As long as you can get it to turn on
Click to expand...
Click to collapse
I even cannot shut it down. That's what make me think, it's lost.
ChrisDos said:
and get to the bootloader, there should be a way to recover it.
Click to expand...
Click to collapse
I didn't find any. In bootloader there should be a warning message first before entering, but there is none. And later some characters (a status message or something like that) on the top of the screen, but there is none.
ChrisDos said:
Looks at the Tab 5Se, S10, note 10, etc threads on recoveries. The Tab S6 forums don't seem to be nearly as prolific as other forums.
Click to expand...
Click to collapse
that's my very last hope
Tronje said:
I even cannot shut it down. That's what make me think, it's lost.
Click to expand...
Click to collapse
All is not lost - If it powers on, it isn't bricked - Simply software malfunctioning. Would assume you've corrupted the system with Magisk, which means just flashing stock should fix it. No idea why Odin isn't working though, since you've already flashed back to stock recovery - Are you sure you have the correct Firmware? Your bootloader is probably locked again, so you won't be able to flash anything but stock.
bartleby999 said:
All is not lost - If it powers on, it isn't bricked - Simply software malfunctioning. Would assume you've corrupted the system with Magisk, which means just flashing stock should fix it. No idea why Odin isn't working though, since you've already flashed back to stock recovery - Are you sure you have the correct Firmware? Your bootloader is probably locked again, so you won't be able to flash anything but stock.
Click to expand...
Click to collapse
I tried all available firmware versions with different odin releases. It's always the same:
<ID:0/010> Initialzation..
<ID:0/010>Set PIT file..
<ID:0/010> DO NOT TURN OFF TARGET!!
<ID:0/010> FAIL! (Auth)
<ID:0/010>
<ID:0/010> Re-Partition operation failed.
Trying to flash twrp recovery:
<ID:0/007> NAND Write Start!!
<ID:0/007> SingleDownload.
<ID:0/007> recovery.img
<ID:0/007> vbmeta.img
<ID:0/007> FAIL! (Auth)
<ID:0/007>
I really really would like to know where this FAIL! (Auth) comes from. But all google search brought solutions not fitting to my situation.
Few minutes ago it just let me flash TWRP_T865_3.3.1-9.tar without grumbling - but there is no twrp recovery, only stock
<ID:0/007> Odin engine v(ID:3.1301)..
<ID:0/007> File analysis..
<ID:0/007> Total Binary size: 0 M
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> NAND Write Start!!
<ID:0/007> SingleDownload.
<ID:0/007> RQT_CLOSE !!
<ID:0/007> RES OK !!
<ID:0/007> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
with TWRP_T865_3.3.1-10L.tar I'm getting error message again
Tronje said:
I tried all available firmware versions with different odin releases. It's always the same:
...
Click to expand...
Click to collapse
I just posted a solution here: https://forum.xda-developers.com/showpost.php?p=82229527&postcount=7
Moe5508 said:
I just posted a solution here: https://forum.xda-developers.com/showpost.php?p=82229527&postcount=7
Click to expand...
Click to collapse
That's great news. Now I got one step further.
For the first time there are some characters on the screen. (see attached file)
... but FAIL! (Auth)
persists
when I tried flashing BL-File
That's great indeed.
Now we get down to the firmware issues...it appears you might have upgraded to a higher BL one which may not allow you to downgrade BL)...might I suggest you try a different firmware?
And you are also already OEM Unlocked, right?
Was this round one of flashing BL, or round two, as per my guide? Please PM me and lets troubleshoot that way rather...
Moe5508 said:
That's great indeed.
Now we get down to the firmware issues...it appears you might have upgraded to a higher BL one which may not allow you to downgrade BL)...might I suggest you try a different firmware?
And you are also already OEM Unlocked, right?
Was this round one of flashing BL, or round two, as per my guide? Please PM me and lets troubleshoot that way rather...
Click to expand...
Click to collapse
display shows
FRP LOCK : OFF
OEM LOCK : OFF (U)
so I think I'm unlocked
I tried all German 4 firmware releases and I always failed in step 1
I got my device in november with october release and upgraded to december release
Here's the full log of Odin, it always shows the same result:
<ID:0/010> Added!!
<ID:0/010> Odin engine v(ID:3.1301)..
<ID:0/010> File analysis..
<ID:0/010> Total Binary size: 152 M
<ID:0/010> SetupConnection..
<ID:0/010> Initialzation..
<ID:0/010> Get PIT for mapping..
<ID:0/010> Firmware update start..
<ID:0/010> NAND Write Start!!
<ID:0/010> SingleDownload.
<ID:0/010> abl.elf
<ID:0/010> xbl.elf
<ID:0/010> FAIL! (Auth)
<ID:0/010>
<ID:0/010> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I could try to lock the device, but probably no good idea?
what is strange:
when I try to install twrp recovery I'm getting message
<ID:0/007> Added!!
<ID:0/007> Odin engine v(ID:3.1401)..
<ID:0/007> File analysis..
<ID:0/007> Total Binary size: 0 M
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> NAND Write Start!!
<ID:0/007> SingleDownload.
<ID:0/007> RQT_CLOSE !!
<ID:0/007> RES OK !!
<ID:0/007> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/007> Removed!!
but when I boot, there is no twrp recovery , only stock, nothing changed
Tronje said:
what is strange:
...
but when I boot, there is no twrp recovery , only stock, nothing changed
Click to expand...
Click to collapse
I think this is a TWRP issue then, and you can ask in the thread there...as far as I can recall with flashing TWRP, you must be quick again at first boot to NOT let the device boot fully...you need to boot directly into TWRP else the custom recovery won't stick...
Moe5508 said:
I think this is a TWRP issue then, and you can ask in the thread there...as far as I can recall with flashing TWRP, you must be quick again at first boot to NOT let the device boot fully...you need to boot directly into TWRP else the custom recovery won't stick...
Click to expand...
Click to collapse
Yes, I know. But I don't know what to do with twrp?
There seemes to be no operating system on the tab and there is no possibility to flash one from twrp. I flashed it just to see what would happen. It couldn't get worse.
What I need is a methode flashing by odin or something else with available firmware.
I only know odin. Is there something similar?
Tronje said:
I tried all available firmware versions with different odin releases. It's always the same:
<ID:0/010> Initialzation..
<ID:0/010>Set PIT file..
<ID:0/010> DO NOT TURN OFF TARGET!!
<ID:0/010> FAIL! (Auth)
<ID:0/010>
<ID:0/010> Re-Partition operation failed.
Trying to flash twrp recovery:
<ID:0/007> NAND Write Start!!
<ID:0/007> SingleDownload.
<ID:0/007> recovery.img
<ID:0/007> vbmeta.img
<ID:0/007> FAIL! (Auth)
<ID:0/007>
I really really would like to know where this FAIL! (Auth) comes from. But all google search brought solutions not fitting to my situation.
Few minutes ago it just let me flash TWRP_T865_3.3.1-9.tar without grumbling - but there is no twrp recovery, only stock
<ID:0/007> Odin engine v(ID:3.1301)..
<ID:0/007> File analysis..
<ID:0/007> Total Binary size: 0 M
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> NAND Write Start!!
<ID:0/007> SingleDownload.
<ID:0/007> RQT_CLOSE !!
<ID:0/007> RES OK !!
<ID:0/007> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
with TWRP_T865_3.3.1-10L.tar I'm getting error message again
Click to expand...
Click to collapse
Sorry but I have to ask, why are you repartitioning anything? The only option you should touch in Odin from the options available on the left side of the screen is automatic reboot as far as I'm aware.
I would slow down and reread from the beginning.
1. Get all the correct firmware, double checking model and version numbers (is it SM-T860 or SM-T860N for example).
2. Prioritize your tasks and do them 1 at a time (get recovery working correctly, then install stock firmware, then if desired install TWRP OR root, one or the other, don't attempt to speed things up and try flashing 2 operations at once).
3. Reread what you are about to attempt before you start the process.
4. Don't try and improve on the instructions you are following, follow them exactly.
If you do the above I really can't see how you can go wrong.
Feel free to PM me any questions and if I can help I will.
Good luck brother
Sent from my [device_name] using XDA-Developers Legacy app
well i was excited to install android on my watch samsung gear sm-r750 so downloaded the rom and all the files needed , took a backup of my sysdata and everything was fine , flashed the custom recovery and i tried to boot in it and it worked then i tried flashing the cm12.1 that's when i got a huge prob , the clock got stuck at samsung logo , i waited and waited but it won't boot to system tried to go to recovery but even the recovery got stuck at the start blue screen , tried to restore the watch using restore to tizen file but when i try to flash i get this <ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1401)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 968 M
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NAND Write Start!!
<ID:0/005> SingleDownload.
<ID:0/005> system-data.img
<ID:0/005> FAIL! (WP)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
i searched all over the internet for the official rom of the watch using the serial number and all the info but every time i try to flash a rom i fall into the same thing and it show the same thing anyone can help and i appreciate it for real i will provide u with everything u need
sm-r750
Click to expand...
Click to collapse
Can you search for SM-R750 Combination Firmware?
I have still limited time... here for instance:
https://shell.boxwares.com/default.aspx?DeviceModel=SM-R750&Type=All#fh5co-table
"We" need valid package... i can can remember trouble with corrupted downloads...
Please check for me...
Goal is to flash Combination Firmware and/or parts of it...
To see what is damaged...
Best Regards
adfree said:
Can you search for SM-R750 Combination Firmware?
I have still limited time... here for instance:
https://shell.boxwares.com/default.aspx?DeviceModel=SM-R750&Type=All#fh5co-table
"We" need valid package... i can can remember trouble with corrupted downloads...
Please check for me...
Goal is to flash Combination Firmware and/or parts of it...
To see what is damaged...
Best Regards
Click to expand...
Click to collapse
thanks well i was looking for the model and i found out that my watch is made in vietnam and bought from germany so downloaded germany package , tryied flashing every file but still no chance :/
tryied flashing every file but still no chance :/
Click to expand...
Click to collapse
Can we try to focus... on Combination Firmware?
Sorry I have only limited time and energy...
Goal is to bring back working OS...
Again.
A
Combination Firmware...
Give me Link what you have... or write Filename...
So we can research in same files...
WITHOUT force me to upload.
B
If you select/found/choose Combiantion Firmware... we can unpack repack...
Create new TAR files for Odin with less files...
I hope you know you can flash less files...
C
Bootloader seems okay...
Otherwise you can not flash...
But maybe PIT is wrong or something else is broken or Hardware damage...
It is not impossible that eMMC dies...
Best Regards
adfree said:
Can we try to focus... on Combination Firmware?
If you select/found/choose Combiantion Firmware... we can unpack repack...
Create new TAR files for Odin with less files...
I hope you know you can flash less files...
C
Bootloader seems okay...
Otherwise you can not flash...
But maybe PIT is wrong or something else is broken or Hardware damage...
It is not impossible that eMMC dies...
Best Regards
Click to expand...
Click to collapse
the combination firmwares i tryed were these 3 for model SM-R750 the 3 of them don't work start download then show error repartition
R750XXU1AOB1
R750XXU1AOB1
R750XXU2BOF1
the problem is that i only know the model of the watch but not whish firmware work with it , tried to find it using country but no chance anyway i'll tell u exactly what i tried , i tried all 4 parts rom that i found no one works, but back to the combination firmware , the problem is that i don't know whish security lvl it is , the only thing i found is the model number on the donwload screen :
odin mode
product name : SM-R750
current binary : custom
system status : official
qualcomm secureboot: enable
RP SWREV : S2 T1 R1 A1 P1
secure download : enable
Write protection : enable
when i download the rom nothing show on the screen of the watch except it starts loading and stop and in odin it shows the error , tried flashing a csc partition , the green bar reach the end then show fail
Code:
odin mode
product name : SM-R750
current binary : custom
system status : official
qualcomm secureboot: enable
RP [B]SWREV : S2[/B] T1 R1 A1 P1
secure download : enable
Write protection : enable
In this Mode we can see it is allready Software Revision 2 Bootloader on Device...
Remember Samsu.g Rollback Prevention Crap...
So 2 of 3 files are simple WRONG.
Code:
R750XXU[COLOR="Red"][B]1[/B][/COLOR]AOB1
R750XXU[COLOR="Red"][B]1[/B][/COLOR]AOB1
R750XXU[COLOR="Green"][B]2[/B][/COLOR]BOF1
Okay, I will download this file... so maybe we can proceed with tests...
All I know at the moment.. this is Qualcomm crap...
My QC times are long ago...
Best Regards
I have now this as reference...
Code:
COMBINATION-FTMA_R750XXU[COLOR="Green"][B]2[/B][/COLOR]BOF1_BoxWares.tar.zip
Code:
aboot.mbn
csc.img
dzImage
dzImage-recovery
modem.bin
modules.img
Ponte-EUR-OPEN-4G-v9.pit
ramdisk-recovery.img
rootfs.img
rpm.mbn
sbl1.mbn
sdi.mbn
system-data.img
tz.mbn
user.img
I have taken the csc.img and create TAR file...
Can you try to flash and report Odin Log?
Thanx in advance.
Best Regards
adfree said:
I have now this as reference...
Code:
COMBINATION-FTMA_R750XXU[COLOR="Green"][B]2[/B][/COLOR]BOF1_BoxWares.tar.zip
Code:
aboot.mbn
csc.img
dzImage
dzImage-recovery
modem.bin
modules.img
Ponte-EUR-OPEN-4G-v9.pit
ramdisk-recovery.img
rootfs.img
rpm.mbn
sbl1.mbn
sdi.mbn
system-data.img
tz.mbn
user.img
I have taken the csc.img and create TAR file...
Can you try to flash and report Odin Log?
Thanx in advance.
Best Regards
Click to expand...
Click to collapse
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1401)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 5 M
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NAND Write Start!!
<ID:0/005> SingleDownload.
<ID:0/005> csc.img
<ID:0/005> FAIL! (WP)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
and btw the download bar reached the end ( the green one )
adfree said:
I have now this as reference...
Code:
COMBINATION-FTMA_R750XXU[COLOR="Green"][B]2[/B][/COLOR]BOF1_BoxWares.tar.zip
Best Regards
Click to expand...
Click to collapse
well i have tried to make tar files of all the imgs inside the rom , somefiles like recovery and csc compleatly download before showing failed , the green bar reachs the end , for some files like rootfs and and system data it starts downloading then the green bar stuck at the beginning , can it be kind of a faulty partition ? odin can't find space to extract the tar files after downloading them so it fails
Sorry, nearly no time nor energy to spent toooo much time with your problem.
Suggestion.
Dump PIT file from Watch... Partition stuff...
As you have USB cable...
Try Tool Heimdall for instance...
https://forum.xda-developers.com/showthread.php?t=755265
Best Regards