I was trying to flash an MIUI ROM to my phone, so
here is what I have done:
- unlocker the bootloader.
- install the recovery.
- flashed the ROM.
- reboot the device.
after I finished all the above steps my phone have stuck in the boot loop, so the obvious solution for me was to reinstall the stock ROM so I have done that by:
- download MIFlash.
- download stock ROM.
- unzip the ROM.
- then I flashed the ROM.
the flashing process took longer than usual, so i have unplugged my phone and tried to reboot it, then the phone doesn't work, even the screen not working, the only sign that the phone is working is when I plug it in my computer I see MIFlash recognize it as COM20 port.
anyone helps me please.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
kannanhassouna said:
I was trying to flash an MIUI ROM to my phone, so
here is what I have done:
- unlocker the bootloader.
- install the recovery.
- flashed the ROM.
- reboot the device.
after I finished all the above steps my phone have stuck in the boot loop, so the obvious solution for me was to reinstall the stock ROM so I have done that by:
- download MIFlash.
- download stock ROM.
- unzip the ROM.
- then I flashed the ROM.
the flashing process took longer than usual, so i have unplugged my phone and tried to reboot it, then the phone doesn't work, even the screen not working, the only sign that the phone is working is when I plug it in my computer I see MIFlash recognize it as COM20 port.
anyone helps me please.
View attachment 5265971
Click to expand...
Click to collapse
Please tell us which versions you have tried to install. It may be that you will try to install Android 10 and you were already with Android 11.
In that case it may be that the phone has been bricked. You can check how to reset it in this other post https://forum.xda-developers.com/t/this-way-i-unbrick-mi-a3-no-qfil.4231465/
In that case it may be that the phone has been bricked. You can check how to reset it in this other post https://forum.xda-developers.com/t/this-way-i-unbrick-mi-a3-no-qfil.4231465/
more detail....
what version of android has your phone? the root process was succesfully? what version of miui try to install? stock miui? port miui? miui for android 10? android 11? modding mi a3 require a lot of attention.... and install miui is not a good idea.... if fastboot mode work, try to install stock firmware via fastboot ... mi a3 have android one, is different from miui. probably you used a guide for install custom rom on miui device
Greeting,
I ask good people for help, more than a month trying to revive my a3.
It’s a child’s cell phone so I don’t know if update 11 worked so it blocked or the display went off disinfectants.
I made a repair according to "We A3 UNBRİCK Solution After Update Android 11! For FREE exclusive 2021!
, everything went without a hitch.
The current situation is that the phone works if the call if I put the sim card, it normally charges, the display is black and there is no response on the display, if there is one I can't see.
If someone has a suggestion of what to do, how can I know which Android is on it now, how can I know if maybe the display itself is broken.
Thank You in advance.
I don't saw the video but the solution is: download and install miflash tool. Connect your phone to pc in edl mode with a normal usb cable Flash a11 fastboot stock firmware. That's all
Related
Hey so it's me again,
I wiped my phone via TWRP because I couldn't access it (went to type the correct password and it always said I was wrong), aaand, now it's stuck on the Mi logo screen.
Again, I looked up demos on how to fix it, and it hasn't worked. As far as I know, all I can get into is fastboot mode (won't even turn off).
My plan was to flash the default stable ROM onto it via MiFlash (as that's what most of the demos recommended) but I can't even get to that stage because I need to get into EDL mode, which I can't do.
Please help.
- Roisin.
Why would you need to get it into EDL? Put it in fastboot and open miflash, download the correct files and flash stock MIUI. You can get back to flashing other stuff after.
Honestly the only reason I thought that was because I read it somewhere, I'm not great with this phone (obviously) :')
Though I do remember trying that and it came up with an error, I'll try it again after school and I'll get back to you. Thanks.
WizardyNinja said:
Hey so it's me again,
I wiped my phone via TWRP because I couldn't access it (went to type the correct password and it always said I was wrong), aaand, now it's stuck on the Mi logo screen.
Again, I looked up demos on how to fix it, and it hasn't worked. As far as I know, all I can get into is fastboot mode (won't even turn off).
My plan was to flash the default stable ROM onto it via MiFlash (as that's what most of the demos recommended) but I can't even get to that stage because I need to get into EDL mode, which I can't do.
Please help.
- Roisin.
Click to expand...
Click to collapse
Happened to me too after wiping one of the partitions I shouldn't have when reinstalling CM. I just re-unlocked using the Mi Unlock program on Windows and then flashed CM13 back. Booted perfectly.
@banana_bender thanks for the tip!
I attempted to flash the ROM and it didn't work. All the tutorials with using MiFlash have a different version, it's confused me.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
You need to select flash all at the bottom
harishmenace said:
You need to select flash all at the bottom
Click to expand...
Click to collapse
There's only "clean all", "save use data", and "clean all and lock" at the bottom. :/
*EDIT* nevermind I found it, gonna try it now!
WizardyNinja said:
Hey so it's me again,
I wiped my phone via TWRP because I couldn't access it (went to type the correct password and it always said I was wrong), aaand, now it's stuck on the Mi logo screen.
Again, I looked up demos on how to fix it, and it hasn't worked. As far as I know, all I can get into is fastboot mode (won't even turn off).
My plan was to flash the default stable ROM onto it via MiFlash (as that's what most of the demos recommended) but I can't even get to that stage because I need to get into EDL mode, which I can't do.
Please help.
- Roisin.
Click to expand...
Click to collapse
Yes, you need get into EDL to flash. Try this .cmd file on fastboot.. Wait until its boots to edl and red led pops up.. Then use ur MiFlash. Remmbr edl mode wont have any display. Just the red led indication.. Hope it helps
Sent from my Xiaomi Mi 5 using XDA Labs
My fellows and friends,
One of these days, I received an update from LineageOS and when installing it from OTA ( using TWRP ), the first lines ( about 10 to 15 ) from the istallation sequence activities were all red, showing that something went wrong. Immediately I removed the batery to stop the process and installed the first version of the custom rom, using the TWRP. It worked fine and I received some notifications about the new revisions of the rom. I skipped the one that caused problems and accepetd the download the one on the Nov, 17, 2018 of the rom, and had installed. It appeared to me that everything was ok but, one day I turned the phone off during thje night. The next morning, I tryed to boot the phone without success. It started an infinite loop situation..... So, I tryed to repeat the same procedure to install the very first version of the rom using TWRP at the recovery mode. When I was using the TWRP to perform the advanced wipe, the dalvik cache, data and system could not be wiped. The answer about the problem was shown as : failed to mount /efes ( inavlid argument ).
I got the information that, in cases like that, the stock rom should be installed. I downloaded it from www.stockrom.net and had it istalled with the use of Odin. Unfortunately, the boot loop was there again.
What was worse now was that no TWRP was installed and Odin could not recognize the phone, although I had installed the newest set of drivers from Samsung, applicable to any devices from them.
Please I need your help to see if there is a possible solution to solve this case. Phone Model: GT-i9300 SSN -I9300GSMH - in Brazil
The message I got from the phone: E: failed to mount /efes ( inavlid argument )
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I thank you in advance any help from you guys,
Gilberto Leite
Flashing a stock ROM will always replace TWRP with the stock recovery.
Are you trying to flash the latest stock ROM?
Do you have a backup of the EFS directory? It's an important directory as that is where a lot of information, including the IMEI is stored.
Hi Audit 13, thnaks for replying.
No I don't have the back up for the folder you mentioned. I was trying to install the last stock rom downloaded from www.stockrom.net, which I suppose was the last one. The worst part is that to computer does not recognize the phone since then.... I do not know what to do. I suppose that there is not a way to back up the folder you mentioned. I think that I have to install something from the very begining, as if the phone was to receive the installation of the very first program, as if it was just coming from the factory, totaly clean. Is that so? Am I right? And, how to do it? I tryed to download the stock rom from Samsung, but I think it was difficult and could not have it accomplished.
Thanks a lot and I'm still waiting instructions of how to solve this problem.
You should try using different USB cables and different USB ports to recognize the phone.
I assume you are using Windows since you mentioned Odin. When you connect the phone, do you see any new devices appear under Device Manager?
What is the phone's model # in download mode?
Is the the ROM you used: https://www.stockrom.net/2015/11/stock-rom-original-de-fabrica-samsung_19.html ?
Did you try using Odin 3.07?
Hi Audit13!
Thanks a lot for your help! I've already got hte files you mentioned and am preparing for trying to do the procedure you taught me.
Thanks again and soon, I hope, to be back to confirm whether it succeded.
Bie....
Hi Audit13,
Unfortunately the computer is not recognizing the SGS device.
I was ready to install the sock rom you suggested, had downloaded the Odin 3.07. I use Windows 10 and the latest drivers have been installed. The phone was in the download mode and tryed all available USB port. I've waited some minutes in each USB port for recognition with no success.
I thank you for your help. Is there any other method we could try? If you could please indicate, I thank you again.
Is there a method available using ADB procedures?
Hope there is.
Thanks, anyway for the help.
Hi Audit13
I think that the situation got a little worse. I tryed to do some recovery on the emergency recovery mode, but none of them succeeded. Now, what I get when tryng to get to the recovery mode is an android robot with an open belly with a red triangle coming out of it.... It gets to thedownload mode, but no recognition from the computer. This happened after trying to ionstall the stock rom obtained from the site you mentioned. The only thing that I could do was through the Universal-Android-Diag-Enabler-V2, what made the qualcomm start. Is there a way to make a comand to the phone that could star the USB debbuging? I tryed the various ODIN versions but with no success.
There is another problem - I'm using Windows 10 and the PowerShell uses different command lines not recognized by adb. I tipped devices and the program indicated that there was an mistake.
Is ther an Instructions Booklet for Odin?
What is your opinion? Do you think that there still exists a solution for my phone's case? If so, what to do?
Please, I ask you to help me on solving this problem.
Thanks in advance...
Hello, I've recently acquired this Infinix Hot 10 device, now I want to root it. I searched on Google and found some links that suggest I can (on getdroidtips) and some that suggest I can't (on newsvivs). I would share the links but I can't post links due to having a new account.
I want to know the opinions of the forum members here on these sites and whether anyone has this device and has successfully rooted it before. I also want to know if this will erase all my data. If you have any trusted rooting guides for this device please share them.
Thank you.
If you as 1st step could successfully unlock phone's bootloader, then as 2nd step you could install a Custom Recovery like TWRP suitable to the phone, then finally as 3rd step it should be possible to root phone's XOS 6.0 ( based on Android 10 ) by means of TWRP.
jwoegerbauer said:
If you as 1st step could successfully unlock phone's bootloader, then as 2nd step you could install a Custom Recovery like TWRP suitable to the phone, then finally as 3rd step it should be possible to root phone's XOS 6.0 ( based on Android 10 ) by means of TWRP.
Click to expand...
Click to collapse
I can unlock the bootloader. But how do I install TWRP afterwards? Do I need a special build for the phone or is the process generic from there? If it's generic could you send me a guide?
fyalis said:
I can unlock the bootloader. But how do I install TWRP afterwards? Do I need a special build for the phone or is the process generic from there? If it's generic could you send me a guide?
Click to expand...
Click to collapse
It doesn't have a custom recovery. When I try to go to recovery manually (Vol UP + Power) it gives a black screen instantly on boot, then continues boot looping when I take my fingers off the buttons.
ADB and Fastbook fail to connect to the device in its various stages of bootlooping so I can't switch to fastboot mode.
SPFlash can't flash it, keeps giving errors. Either when it reboots during a flash attempt or it gives an authentication key error. Apparently I need an auth key to flash this device? Even though I'm using the original ROM.
fyalis said:
I can unlock the bootloader. But how do I install TWRP afterwards? Do I need a special build for the phone or is the process generic from there? If it's generic could you send me a guide?
Click to expand...
Click to collapse
As above mentioned TWRP must match phone's specs ( Android OS, etc.pp ). In case there isn't a pre-build one for your phone you can try to ask TWRP-developers to build it for you by means of TWRP Builder app.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
After using Cusrom, does gyro Infinix Hot 10 still delay?
I want to know how I can root my infinix hot 10
Root Infinix hot 10 (X682B)
1-: PC required,
2-: enable developer option and oem unlock,
3-: turn usb debugging on,
4-: on pc install adb and fastboot,
5-: connect phone with pc,
6-: flash below rooted files using adb and fastboot,
adb reboot bootloader
fastboot flashing unlock
fastboot flash boot boot.img
fastboot flash vbmeta vbmeta.img
fastboot reboot
you Phone data will be erased,
Now install magisk manager and enjoy root.
Root file:
Snowbzy said:
I want to know how I can root my infinix hot 10
Click to expand...
Click to collapse
Hi,
I need to put my device in Emergency Download Mode (EDL) in order to recover the boot and fix the bootloop (fastboot not working).
Where is the test points, or how to figure them out?
See the phone schemas below:
Redmi Note 10 Pro 5G (chopin)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Solved without using EDL test points. see The Solution below.
BIG Thanks goes to @NOSS8 for his help.
ramiro2016 said:
Hi,
I need to put my device in Emergency Download Mode (EDL) in order to recover the boot and fix the bootloop (fastboot not working).
Where is the test points, or how to figure them out?
See the phone schemas below:
Redmi Note 10 Pro 5G (chopin)
Click to expand...
Click to collapse
this phone did not need edl or test point.
https://forum.xda-developers.com/t/...-after-flashing-gsi-rom.4448229/post-86995731
@NOSS8 I've tested this method out. The USB serial device drive shows for about 3 seconds and MTK META UTILITY only detects it when I uninstall the driver for the USB serial device. Then it didn't succeed due to the driver I guess. Look at the result in the following image.
Note:
I'm using Windows 11. For this, I will install Windows 7. I will redo the process. When I finish, I will provide you with the results.
ramiro2016 said:
@NOSS8 I've tested this method out. The USB serial device drive shows for about 3 seconds and MTK META UTILITY only detects it when I uninstall the driver for the USB serial device. Then it didn't succeed due to the driver I guess. Look at the result in the following image.
Note:
I'm using Windows 11. For this, I will install Windows 7. I will redo the process. When I finish, I will provide you with the results.
Click to expand...
Click to collapse
https://xiaomitools.com/sp-flash-tool-en/
there is also this tool (new not tested).
https://forum.xda-developers.com/t/tool-rom2box-all-in-one-frp-flashing-unlocking-tool.4477349/
https://gearupwindows.com/how-to-disable-driver-signature-enforcement-on-windows-11-10/
check for program update
@NOSS8 Not working neither in windozs 11 nor in windows 7, I've tested a lot of MediaTek drivers with no luck. Even the new app (Rom2Box) is not detecting the USB serial at all.
Look at the attached images of test I've done.
ramiro2016 said:
@NOSS8 Not working neither in windozs 11 nor in windows 7, I've tested a lot of MediaTek drivers with no luck. Even the new app (Rom2Box) is not detecting the USB serial at all.
Look at the attached images of test I've done.
Click to expand...
Click to collapse
This is not the latest version(V52).
https://mega.nz/file/H0MW3BST#PfzzmSwbncT5aV7A1ZhWztQonLj4CgJLDHbXoRtCu54
Maybe useful
https://www.bypassfrpfiles.com/2021...h_Secure_Boot_Disable_Tool_V52_Latest_Version
BTW: I don't have and would never have a xiaomi Mediatek and therefore never use these tools for Mediatek, that's why I can help you for the links but not for the use of these tools.
If it still doesn't work post the latest log.
Unfortunately, even the latest version v52 doesn't work, but this tool helped me solve the problem.
https://github.com/bkerler/mtkclient (You need to follow the readme document).
I've used the mtk_gui, and after it got connected, I sent my original firmware boot.img that is currently installed on my mobile after renaming it to boot.bin to the device partitions boot_a and boot_b
Rebooting the device got me the original recovery mode and the fastboot mode.
Then I used the MiFlash tool to flash my phone using flash_all.bat
Every thing is working fine know.
BIIIIIIIIIIIG Thanks goes to @NOSS8 for helping me all the way to the solution .
Hi Folks,
I have a Xiomi Note 10 (camellian), unlocked and has USB Debugging switched on.
No matter what I do, I can't install TWRP or Orangefox because it fails with "FAILED: Too Many Links"
I've followed so many guides on how to fix this and they all fail. I tried to flash the stock rom with Mi Flash and that failed too (Constant "Unhandled exception" error as it doesnt seem to want to install drivers and wont continue without them). I've manually updated the ADB drivers for the Note and that worked fine. Mi Pc Suite doesnt recognise my phone unless i "Update your phone before you connect" (The phone is fully updated)
Please, for the love of the baby jesus and the little donkey, tell me what I can do to try and figure out what the smeg is going wrong
EDIT:
Ive changed ports/cables, tried compatibilty on programs, reinstalled ADB drivers
trying "fastboot flash boot recovery.img" (for orange fox) throws up "FAILED: remote: size too large"
hellfirehound said:
Hi Folks,
I have a Xiomi Note 10 (camellian), unlocked and has USB Debugging switched on.
No matter what I do, I can't install TWRP or Orangefox because it fails with "FAILED: Too Many Links"
I've followed so many guides on how to fix this and they all fail. I tried to flash the stock rom with Mi Flash and that failed too (Constant "Unhandled exception" error as it doesnt seem to want to install drivers and wont continue without them). I've manually updated the ADB drivers for the Note and that worked fine. Mi Pc Suite doesnt recognise my phone unless i "Update your phone before you connect" (The phone is fully updated)
Please, for the love of the baby jesus and the little donkey, tell me what I can do to try and figure out what the smeg is going wrong
EDIT:
Ive changed ports/cables, tried compatibilty on programs, reinstalled ADB drivers
trying "fastboot flash boot recovery.img" (for orange fox) throws up "FAILED: remote: size too large"
Click to expand...
Click to collapse
i see none TWRP and O.F for camellian, can you post the links +Miflash log?
The TWRP is unofficial https://forum.xda-developers.com/t/unofficial-twrp-camellia-camellian.4304717/
There is no MiFlash log anywhere. Sorry im new to this
I think I need to flash the original rom before trying to install a recovery rom
hellfirehound said:
The TWRP is unofficial https://forum.xda-developers.com/t/unofficial-twrp-camellia-camellian.4304717/
There is no MiFlash log anywhere. Sorry im new to this
Click to expand...
Click to collapse
The Mi Flash logs are in the Miflash Log folder (post the last + or - 20/22ko
This twrp seems not to work (closed thread).
Try the command: fastboot boot twrp.img
The phone will reboot in TWRP after that go to Advanced > Flash Current TWRP
And what do you want to do with the TWRP, your device has a Mediatek soc and there is little or no development for Xiaomi with a Mediatek soc.
https://forum.xda-developers.com/t/flash-tool-guide-use-xiaomi-flash-tool.4262425/
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It looks like a mediatek device.
Never Mind, ill keep the phone as is. Thanks for trying to help
Download and extract to the root of the disk.C:/platform....
https://developer.android.com/studio/releases/platform-tools
rename the Twrp to twrp.img
Put it in the Platform tools folder
Execute the command from this folder
Since no custom is available for your phone I guess you want to update or downgrade for these 2 cases use Miflash not TWRP.
https://forum.xda-developers.com/t/flash-tool-guide-use-xiaomi-flash-tool.4262425/
this error
is frequent with certain version of W10.
Disable driver verification.
.