Hi, I wonder if you guys have a problem with controller ipega 9099, when I paired with the gamepad, it detected as keyboard, not a gamepad, so I cant play game with the controller. What is the solution to this problem?
I tried in my friend samsung s10 there is no problem with that
METROpaso igual pero des pues lo reintente y ya lo detecto como pg9099, el problema es que de un momento a otro dejo de funcionar! Al principio pensé que era la batería! Pero monte otra batería y solo vibra! Y se apaga. Solo funciona por cable usb en la PC
mod edit:
METROpassed the same but then try again and I already detect it as pg9099, the problem is that from one moment to another it stopped working! At first I thought it was the battery! But mount another battery and just vibrate! And it goes off. It only works by usb cable on PCPost is out of context/off topic for this thread and also is not written in english
Related
Traducido con google traductor: Tengo un gran problema, tengo un brick en mi celular, y estoy tratando de flashear, pero falla, y me di cuenta de porque, es que mi celular se descarga antes de que termine de flashear, por mas que llene la bateria al maximo y empiece el flasheo, se termina la bateria y se cancela el flasheo, de hecho no se si ya se daño mas de que esta, pero ahora no se que hacer, creo que aproximadamente tardara 12 horas, y el telefono solo resiste 5 horas, y no se si haiga una firmware muy liviano como para que se pueda instalar rapidamente, solo quiero que inicie el celular para poder usar el recovery e instalar minicm u otro... helpppppppppp
ENGLISH please !
Sent from my stunning x10mini !
[MINICM 1.0.2 with CWM]
(Any problem ? Feel free to contact me - [email protected] , +919033451101)
He bricked his phone, when he tries to flash the phone is out of battery before it's done so he can't finish the process.
He has charged the battery to the max but still can't do it. Says his battery lasts like 5 hours in the process and he thinks it's supposed to last like 12 hours so it's a lot of time.
tell him to unplug the power cable (i mean remove the battery) then charge again, the phone will be back soon
Ok sorry, im a fail:
Translated with google translator: I have a big problem, I have a brick in my cell and I'm trying to flash, but fails, and because I realized is that my cell is discharged before the end of Flash, and more than full the maximum battery and start flashing, the battery ends and cancels the flash, in fact if you are not hurt over this, but I do not know what to do, I think that about takes 12 hours, and phone only stand 5 hours, and do not know if a firmware haiga very light so that it can be installed quickly, I just want to start the cell to use the recovery and install minicm or other ... helpppppppppp
untime said:
tell him to unplug the power cable (i mean remove the battery) then charge again, the phone will be back soon
Click to expand...
Click to collapse
Desconecta el cable de poder (es el que va a la bateria en los minis, le quitas la tapa y hay una cosita que se remueve porque el mini la trae interna la bateria y con eso es como si la quitaras) y vuelvelo a cargar, el telefono va a estar de vuelta pronto.
De otro post que te pusieron agarre esto
jodhaniohm97 said:
Does the led of your phone flash the red colour three times? The red led flash three times because your phones battery is dead. So you plug in your phone with usb cable to the computer and let it remain for two or more hour (this means that you're charging your phone )During this time the phone would not turn on and you can do nothing with your phone during this time. You will only see the red led . After two hours of charging disconnect and run seus and Follow the onscreen instruction. I followed the above mentioned procedure and I got my mini back .
Click to expand...
Click to collapse
El led te tu telefono flashea 3 veces en color rojo? El flasheo triple del led rojo es porque la bateria del telefono esta muerta. Entonces conecta tu telefono con el cable usb a la computadora y dejalo ahi por 2 o mas horas (esto significa que estas cargando el telefono). Durante este tiempo el telefono no se va a prender ni vas a poder hacer nada con el. Solo vas a ver el led rojo.
Despues de dos horas de carga desconectalo y corre SEUR y sigue las instrucciones en la pantalla. Yo segui (el que te da el consejo) el procedimiento mencionado y recupere mi mini.
Creo que ya habias visto ese post, igual te lo puse por si acaso y por si la traduccion de google variaba un poco. Ojala se te arregle el mini, suerte.
Good friends, I have a problem with the sony xperia u, install a custom room kitkat for ics, initially walked all good, but it is now when I turn on the phone, I go and I get to have stopped all applications of my telephone and so constantly, I wanted to flash it with flashtool, but will not let me stays in reading device information, another problem I have is that I connect to the pc I recognized the phone, but I go to memory, I copy a room and when you restart disappears, also I have the USB debugging mode disabled and when frame turns but when I leave and go back inside to settings the phone makes me what to uncheck, any possible solution ?, clarified also try to restore cell and does not work,
________________________________________________________________________________________________________________________
Buenas amigos, tengo un problema con el sony xperia u, instale un custom room de kitkat para el ics, al principio andaba todo bien, pero resulta que ahora cuando prendo el telefono, entro y me sale que se han detenido todas las aplicaciones de mi telefono y asi constantemente, quise flashearlo con el flashtool, pero no me deja se queda en reading device information, otro problema que tengo es que lo conecto a la pc me lo reconoce el telefono, pero yo entro a la memoria, le copio una room y cuando lo reinicio desaparece, tambien tengo el modo de depuracion usb deshabilitado y cuando lo marco se pone pero cuando salgo y vuelvo a entrar a configuraciones el telefono me lo vuelve a desmarcar, alguna solucion posible?, aclaro tambien intente con el restaurar del celular y tampoco funciona,:crying:
Hola mi pc no reconoce lg g4 he utilizado 4 cables diferentes incluyendo el original en buen estado tambien he reinstalado los drivers varias veces , lo he hecho en dos pc diferentes y el cel no se conecta y no le veo daño en el centro de carga , el celular esta en el bootloop pero entra a download mode pero no lo reconoce el pc que pueod hacer con este problema ? Ah tambien probe una bateria nueva pero generica y nada. Se agradece cualquier ayuda.
cjsum18 said:
Hola mi pc no reconoce lg g4 he utilizado 4 cables diferentes incluyendo el original en buen estado tambien he reinstalado los drivers varias veces , lo he hecho en dos pc diferentes y el cel no se conecta y no le veo daño en el centro de carga , el celular esta en el bootloop pero entra a download mode pero no lo reconoce el pc que pueod hacer con este problema ? Ah tambien probe una bateria nueva pero generica y nada. Se agradece cualquier ayuda.
Click to expand...
Click to collapse
Post by cjsum18 translated to English:
"Hello my pc does not recognize lg g4 i used 4 different cables including the original in good condition i have also reinstalled the drivers several times, i have done it on two different pc and the cell does not connect and i do not see damage in the load center, The cell phone is in the bootloop but it enters download mode but does not recognize the pc that can do with this problem? Ah also probe a new but generic battery and nothing. Any help is appreciated."
Para futuras referencias según las reglas de XDA, debe publicar en inglés.
For future reference as per XDA's rules, you need to be posting in english.
There's a sub section for the LG G4 that might have the answers your looking for, This thread might help.
Hay una sub sección para el LG G4 que podría tener las respuestas que busca, Este hilo podría ayudar.
https://forum.xda-developers.com/g4/help/lg-g4-stuck-bootloop-t3268734
Hi everyone, first forgive my Google English . I have a mediapad pro and I would like to duplicate the screen to the PC and AT THE SAME TIME that the tablet charges battery. I have achieved this through a wireless connection and adb commands, but I am interested in the connection being by cable (for higher speed among other variables). I have tried several HUBS with two USB C connections (one for charging and one for transferring data) but at most I have only achieved charging but NOT data transfer. I have tried with different cables (original huawei and others). Do you know if it is feasible? I'm sorry for the tirade.
EN ESPAÑOL
hola a todos/as, primero perdonad mi ingles de Google .
tengo una mediapad pro y me gustaría duplicar la pantalla hacia el PC y AL MISMO TIEMPO que la tablet se cargue de bateria. Esto lo he conseguido mediante una conexión wireless y los comandos adb, pero me interesa que la conexion sea por cable (para mayor velocidad entre otras variables). He probado varios HUBS con dos conexiones USB C (una para carga y otra para transferir datos) pero como mucho solo he conseguido la carga pero NO la transferencia de datos. He probado con diferentes cables (originales huawei y otros). ¿sabéis si es factible?.
Lamento la parrafada.
First, get a cable that works with ADB. I use this one:
https://www.amazon.com/dp/B01AF2O4PE/ref=cm_sw_r_cp_apa_i_Q8kvFbQ7BM11D
Then use Scrcpy to display and interact with your device on your PC:
https://github.com/Genymobile/scrcpy
Sent from my PH-1 using Tapatalk
Hello, I am already using the srccpy version 1.16 app for the USB connection and the Wireless connection, I use the original Huawei cable, and also other similar high-end ones. the problem is that when I use the USB connection, I CANNOT charge the tablet AT THE SAME time.
EN ESPAÑOL
hola, ya estoy utilizando la app srccpy version 1.16 para la conexión USB y la conexión Wireless, utilizo el cable original Huawei, y también otros similares de alta categoría. el problema es que cuando utilizo la conexión USB, NO PUEDO cargar la tablet AL MISMO tiempo.
Hello,
I have some problems with that head unit, before sending it back i would like to have some advice. I tried search and did not find anything about this. So my problems:
1. No internet when sim is insert, i can make phone calls and send sms. What is the solution?
2. Audio problems when turning off the car and going to the shop example. When coming back and starting the car there is no sound but unit turns on. Only solution that i can workaround is to turn off the car and lock the doors and unlock the doors. (maybe some immo/security problem?). My car is Mitsubishi Outlander 2015 and the right can bus have been chosen.
I hope that somebody can help me with this problems Internet is not must have, i can always hotspot but audio is my big problem.
Thank you for your help.
Meelis
good night I bought junsun v1 for golf VII and when I turn off the key the radio is still on what could it be?
boa noite comprei junsun v1 para golf VII e quando desligo a chave o rádio continua ligado o que poderá ser ?
hello colleagues, I have a junsun v1 pro 4g octacore 64gb I have the following problem: I had the screen installed and I removed it because it had image errors once removed from the vehicle I managed to repair the problem, I reinstalled it and the audio does NOT work and has disappeared the standard EQUALIZER and even the standard Igo browser, someone would know how to give me a solution I'm desperate, everything else works correctly
Thank you very much to all!!!!
hola compañeros , tengo un junsun v1 pro 4g octacore 64gb tengo el siguiente problema: tenia instalado la pantalla y la retire por que tenia fallos de imagen una vez retirada del vehiculo consegui reparar el problema , e vulto a instalarla y NO funciona el audio y a desaparecido el ECUALIZADOR de serie e incluso el navegador Igo de serie, alguien sabria darme alguna solución estoy desdesperado, todo lo demas funciona correctamente
Muchas Gracias a todos!!!!