Hello XDA members !
My CAT S30 is rooted maybe i don't unlock bootloader to use a custom rom.
Fastboot devices => 6278c6cf fastboot
Fastboot oem unlock or fastboot flashing unlock (DC check mode) => "failed <remote : unknow command>
finished. total time : 0.006s"
fastboot oem device-info => "failed <remote : unknow command>
finished. total time : 0.004s"
With app such as Flashify, i used Recovery image and choose a file "Twrp-3.1.1-0-b15q.img" (No img for S30 :silly. When startup on the recovery "Recovery image verification failed".
How to unlock Bootloader CAT S30 ?
Thanks,
Any idea ? Thks.
Nobody ? :crying:
Why ?
Help me please...
You are dead ?
Hi I can't help you for now I am looking to do the same, to root my CAT S30. But after hours don't find anyone who done this...did you try to root with kingroot or towelroot ?
hola, si tu cel funciona, podes sacar una copia de la rom, el mio se queda en el logo
Hola, my Cat S30 works properly. But I don't know how to do a copie rom...
man how did you rooted? help me
I need older firmware 0.017 to root
fefer49 said:
Hello XDA members !
My CAT S30 is rooted maybe i don't unlock bootloader to use a custom rom.
Fastboot devices => 6278c6cf fastboot
Fastboot oem unlock or fastboot flashing unlock (DC check mode) => "failed <remote : unknow command>
finished. total time : 0.006s"
fastboot oem device-info => "failed <remote : unknow command>
finished. total time : 0.004s"
With app such as Flashify, i used Recovery image and choose a file "Twrp-3.1.1-0-b15q.img" (No img for S30 :silly. When startup on the recovery "Recovery image verification failed".
How to unlock Bootloader CAT S30 ?
Thanks,
Click to expand...
Click to collapse
Which firmware?
i did an upgrade from 7.0 nougat to oreo 8.0 using firmware finder.apk, after that every thing was going good, i backed up my stock rom and wanna try 8.0 custom rom and accidentally i formatted my backup and and tried many custom roms but no survival chances,
now my oem info shows RNE-L21C432B133, i had also downloaded the full ota + hw/eu file but dont know how to flash properly mate 10 lite.
can any one help ????
you should format by using fastboot. First download your stock ROM and extract with Huawei Firmware Extracter. Select UPDATE.APP and extract following files:
erecovery_kernel.img
erecovery_ramdisk.img
erecovery_vbmeta.img
cust.img
erecovery_vendor.img
kernel.img
ramdisk.img
recovery_vbmeta.img
recovery_vendor.img
system.img
Reboot your device in to fastboot mode (recovery mode) and flash those files one by one:
fastboot flash erecovery_kernel erecovery_kernel.img
...
fastboot flash system system.img
//
Erase your userdata space:
fastboot -w
//reboot
fastboot reboot
Now go to your stock recovery and do factory reset, wide cache.
Now your device back to stock OREO
Install Stock ROM Huawei
-.phone connected USB
-.connected To On TWRP
-.Rename xxxxxx to update_all_hw
-.Rename xxxxxx to update_data_public
-----------------------------------------------------
Install
-.Shift + right click the folder and open command prompt here
-.adb push HuRUpdater_0.3.zip /sdcard
-.adb push update.zip /sdcard
-.adb push update_all_hw.zip /sdcard
-.adb push update_data_public.zip /sdcard
-----------------------------------------------------
install on TWRP
-.install - Press HuRUpdater_0.3.zip
-.Then follow instructions on screen VOLUME DOWN
-.Press back once more -- Select reboot recovery
-.Wipe data/factory reset -- Then reboot system
-.DONE GOODLUCK
JAZZYBUTT999 said:
i did an upgrade from 7.0 nougat to oreo 8.0 using firmware finder.apk, after that every thing was going good, i backed up my stock rom and wanna try 8.0 custom rom and accidentally i formatted my backup and and tried many custom roms but no survival chances,
now my oem info shows RNE-L21C432B133, i had also downloaded the full ota + hw/eu file but dont know how to flash properly mate 10 lite.
can any one help ????
Click to expand...
Click to collapse
ma sauvegarde de rne-l21c432b133 full https://mega.nz/#!ksdhmCQJ!fb5TDWpBEEA_BwXnO4gd86ry33tD6rVaGdXQ3kYy7LU
copy all to your TWRP folder from your SD card.
Use this TWRP because the backup was done with.
* https://mega.nz/#!c1tyRL7Z!r3fhcK5eNHR1aaN_s8OwafD1eQutvpc2cF-lG4guQdk
restart in TWRP.
go to wipe.
check all except oeminfo. and wipe all.
go to wipe, data format, write yes and validate.
go to wipe check data and change to f2f.
now, go to restore, and restore all files one by one, except oeminfo.
once finished, go to install, install the file meta-inf.zip (it's product).
https://mega.nz/#!d5sgDQba!Zntk05RjlDLFi7Wmz7mmVvvr7nc4vp7Kv2SZtcLjB5Q
then restart.
here is.
thanks for the info
Chisetdel31260 said:
ma sauvegarde de rne-l21c432b133 full https://mega.nz/#!ksdhmCQJ!fb5TDWpBEEA_BwXnO4gd86ry33tD6rVaGdXQ3kYy7LU
copy all to your TWRP folder from your SD card.
Use this TWRP because the backup was done with.
* https://mega.nz/#!c1tyRL7Z!r3fhcK5eNHR1aaN_s8OwafD1eQutvpc2cF-lG4guQdk
restart in TWRP.
go to wipe.
check all except oeminfo. and wipe all.
go to wipe, data format, write yes and validate.
go to wipe check data and change to f2f.
now, go to restore, and restore all files one by one, except oeminfo.
once finished, go to install, install the file meta-inf.zip (it's product).
https://mega.nz/#!d5sgDQba!Zntk05RjlDLFi7Wmz7mmVvvr7nc4vp7Kv2SZtcLjB5Q
then restart.
here is.
Click to expand...
Click to collapse
i will try asap and after that i will let u know the results.... thumbs up:good::good::good:
Help
Hi I also have my Mate 10 Lite RNE-L21C432 locked. I can only get into fastboot.
These are the results of fast boot:
C:\adb fastboot oem get—product—mode1
(bootloader) RNE-L21
OKAY [ 0.016s]
finished, total tine: 0.031s
C:\adb>fastboot getvar vendorcountry
vendorcountry: hw/eu
finished, total tine: 0.016s
C:\adb>fastboot oem get-build-number
(bootloader) :Systen 8.0.0.046(07P2)
OKAY [ 0.031s]
finished, total tine: 0.031s
C:\adb)fastboot getvar rescue_enter_recovery
(bootloader) This is sec phone??
(bootloader) NOT secboot recovery image?
getvar:rescue_enter_recovery FAILED (remote: FAIL:verify secure image fail? )
finished, total tine: 0.078s
C:\adb)fastboot oem oeminforead-SYSTEM_VERSION
(bootloader) :Systen 8.0.0.046(07P2)
OKAY I 0.031s]
finished, total tine: 0.031s
C:\adb>
can someone help me? Thank you
pabbata said:
Hi I also have my Mate 10 Lite RNE-L21C432 locked. I can only get into fastboot.
These are the results of fast boot:
C:\adb fastboot oem get—product—mode1
(bootloader) RNE-L21
OKAY [ 0.016s]
finished, total tine: 0.031s
C:\adb>fastboot getvar vendorcountry
vendorcountry: hw/eu
finished, total tine: 0.016s
C:\adb>fastboot oem get-build-number
(bootloader) :Systen 8.0.0.046(07P2)
OKAY [ 0.031s]
finished, total tine: 0.031s
C:\adb)fastboot getvar rescue_enter_recovery
(bootloader) This is sec phone??
(bootloader) NOT secboot recovery image?
getvar:rescue_enter_recovery FAILED (remote: FAIL:verify secure image fail? )
finished, total tine: 0.078s
C:\adb)fastboot oem oeminforead-SYSTEM_VERSION
(bootloader) :Systen 8.0.0.046(07P2)
OKAY I 0.031s]
finished, total tine: 0.031s
C:\adb>
can someone help me? Thank you
Click to expand...
Click to collapse
Hello
do you have TWRP for emui 8.0 that starts?
if so, use HurUpdater 0.3, reinstall rne-l21c432b304.
Chisetdel31260 said:
Hello
do you have TWRP for emui 8.0 that starts?
if so, use HurUpdater 0.3, reinstall rne-l21c432b304.
Click to expand...
Click to collapse
Hello
as I indicated in the previous post, I can only enter fastboot mode. when I try to install Oreo recovery from this message:
C:\Users\Pabbata\Desktop\TWRP oreo Mate 10 lite\TWRP oreo\data>fastboot flash re
covery_ramdisk recovery_ramdisk.img
target reported max download size of 471859200 bytes
sending 'recovery_ramdisk' (9882 KB)...
OKAY [ 0.359s]
writing 'recovery_ramdisk'...
FAILED (remote: partition length get error)
finished. total time: 0.374s
It does not let me install any TWRP either Oreo or Nougat. As you can see fastboot says that the operating system 8.0.0.046(07P2) is currently installed.
pabbata said:
Hello
as I indicated in the previous post, I can only enter fastboot mode. when I try to install Oreo recovery from this message:
C:\Users\Pabbata\Desktop\TWRP oreo Mate 10 lite\TWRP oreo\data>fastboot flash re
covery_ramdisk recovery_ramdisk.img
target reported max download size of 471859200 bytes
sending 'recovery_ramdisk' (9882 KB)...
OKAY [ 0.359s]
writing 'recovery_ramdisk'...
FAILED (remote: partition length get error)
finished. total time: 0.374s
It does not let me install any TWRP either Oreo or Nougat. As you can see fastboot says that the operating system 8.0.0.046(07P2) is currently installed.
Click to expand...
Click to collapse
teste this TWRP https://forum.xda-developers.com/showpost.php?p=76397635&postcount=2
---------- Post added at 07:43 PM ---------- Previous post was at 07:43 PM ----------
pabbata said:
Hello
as I indicated in the previous post, I can only enter fastboot mode. when I try to install Oreo recovery from this message:
C:\Users\Pabbata\Desktop\TWRP oreo Mate 10 lite\TWRP oreo\data>fastboot flash re
covery_ramdisk recovery_ramdisk.img
target reported max download size of 471859200 bytes
sending 'recovery_ramdisk' (9882 KB)...
OKAY [ 0.359s]
writing 'recovery_ramdisk'...
FAILED (remote: partition length get error)
finished. total time: 0.374s
It does not let me install any TWRP either Oreo or Nougat. As you can see fastboot says that the operating system 8.0.0.046(07P2) is currently installed.
Click to expand...
Click to collapse
teste this TWRP https://forum.xda-developers.com/showpost.php?p=76397635&postcount=2 : p
---------- Post added at 07:44 PM ---------- Previous post was at 07:43 PM ----------
pabbata said:
Hello
as I indicated in the previous post, I can only enter fastboot mode. when I try to install Oreo recovery from this message:
C:\Users\Pabbata\Desktop\TWRP oreo Mate 10 lite\TWRP oreo\data>fastboot flash re
covery_ramdisk recovery_ramdisk.img
target reported max download size of 471859200 bytes
sending 'recovery_ramdisk' (9882 KB)...
OKAY [ 0.359s]
writing 'recovery_ramdisk'...
FAILED (remote: partition length get error)
finished. total time: 0.374s
It does not let me install any TWRP either Oreo or Nougat. As you can see fastboot says that the operating system 8.0.0.046(07P2) is currently installed.
Click to expand...
Click to collapse
teste this TWRP https://forum.xda-developers.com/showpost.php?p=76397635&postcount=2 : p
Chisetdel31260 said:
teste this TWRP https://forum.xda-developers.com/showpost.php?p=76397635&postcount=2
---------- Post added at 07:43 PM ---------- Previous post was at 07:43 PM ----------
teste this TWRP https://forum.xda-developers.com/showpost.php?p=76397635&postcount=2 : p
---------- Post added at 07:44 PM ---------- Previous post was at 07:43 PM ----------
teste this TWRP https://forum.xda-developers.com/showpost.php?p=76397635&postcount=2 : p
Click to expand...
Click to collapse
Hi I also installed this twrp, this is the result:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
pabbata said:
Hi I also installed this twrp, this is the result:
Click to expand...
Click to collapse
ME TOO Help Me
---------- Post added at 03:08 PM ---------- Previous post was at 03:00 PM ----------
++++++++++++++++
*Deleted*
tried but failed
Chisetdel31260 said:
ma sauvegarde de rne-l21c432b133 full https://mega.nz/#!ksdhmCQJ!fb5TDWpBEEA_BwXnO4gd86ry33tD6rVaGdXQ3kYy7LU
copy all to your TWRP folder from your SD card.
Use this TWRP because the backup was done with.
* https://mega.nz/#!c1tyRL7Z!r3fhcK5eNHR1aaN_s8OwafD1eQutvpc2cF-lG4guQdk
restart in TWRP.
go to wipe.
check all except oeminfo. and wipe all.
go to wipe, data format, write yes and validate.
go to wipe check data and change to f2f.
now, go to restore, and restore all files one by one, except oeminfo.
once finished, go to install, install the file meta-inf.zip (it's product).
https://mega.nz/#!d5sgDQba!Zntk05RjlDLFi7Wmz7mmVvvr7nc4vp7Kv2SZtcLjB5Q
then restart.
here is.
Click to expand...
Click to collapse
twrp does'nt flash, this happens see pic after flashing
https://lh3.googleusercontent.com/-...G99AIgCJoC/w530-h942-n-rw/AAAAAAAAAAAAAAA.jpg
I used HuRu today, to flash a Firmware Finder stock Oreo ROM as per my build number
I was partially on elemntal 1.1 (oreo) the phone got boot loop, I tried with my stock
oreo backups, it would show error on Venor and System, tried with Mounting unmounting
from TWRP, didnt work, restarted phone Lost TWRP, but the good thing was my Bootloader
and FRP were unlocked (used a file from Elemental rom thread to unlock FRP,
when my bootloader was already unlocked). In TWRP finally I tried to wipe
every thing (not SD Card), then tried to restore my back up again, unchecked vendor then
restarted, after a few bootloop restarts, I got stock recovery and used Format option, then got nothing on phone just the Stock recovery, format would close with ! mark in between.
So at this point, I would repeatedly get following error when installing any of TWRPs for mate 10 lite:
FAILED (remote: Command not allowed)
Was worried thinking I am not going to get any thing from this point, but then just tried the dload method
which worked only once for me in the past, and later always failed @ 5 %
So tried dload with the files for Nougat (RNE-L21C185B142), luckily it worked for me, I am on nougat again
sentavn said:
you should format by using fastboot. First download your stock ROM and extract with Huawei Firmware Extracter. Select UPDATE.APP and extract following files:
erecovery_kernel.img
erecovery_ramdisk.img
erecovery_vbmeta.img
cust.img
erecovery_vendor.img
kernel.img
ramdisk.img
recovery_vbmeta.img
recovery_vendor.img
system.img
Reboot your device in to fastboot mode (recovery mode) and flash those files one by one:
fastboot flash erecovery_kernel erecovery_kernel.img
...
fastboot flash system system.img
//
Erase your userdata space:
fastboot -w
//reboot
fastboot reboot
Now go to your stock recovery and do factory reset, wide cache.
Now your device back to stock OREO
Click to expand...
Click to collapse
Forgive me How is the exact procedure for formatting via fastboot Thanks I have the phone in these conditions
Diego1976 said:
Forgive me How is the exact procedure for formatting via fastboot Thanks I have the phone in these conditions
Click to expand...
Click to collapse
I think by running this command fastboot flash system system.img will automatically erase your data.
JAZZYBUTT999 said:
twrp does'nt flash, this happens see pic after flashing
https://lh3.googleusercontent.com/-...G99AIgCJoC/w530-h942-n-rw/AAAAAAAAAAAAAAA.jpg
Click to expand...
Click to collapse
hello did you solve it? the image like you comes out to me too ..
I also tried with hwota but nothing to do!
let me know if you found a solution
thanks in advance
Aniwat12 said:
Install Stock ROM Huawei
-.phone connected USB
-.connected To On TWRP
-.Rename xxxxxx to update_all_hw
-.Rename xxxxxx to update_data_public
-----------------------------------------------------
Install
-.Shift + right click the folder and open command prompt here
-.adb push HuRUpdater_0.3.zip /sdcard
-.adb push update.zip /sdcard
-.adb push update_all_hw.zip /sdcard
-.adb push update_data_public.zip /sdcard
-----------------------------------------------------
install on TWRP
-.install - Press HuRUpdater_0.3.zip
-.Then follow instructions on screen VOLUME DOWN
-.Press back once more -- Select reboot recovery
-.Wipe data/factory reset -- Then reboot system
-.DONE GOODLUCK
Click to expand...
Click to collapse
This Works on Semi-Brick (Start normally and when Android wakes up it reboots in recovery)?
hi, my mate 10 seems bricked. i can't go into fastboot mode neither in recovery. when i charge the phone, the led remain off.
but if i connect the phone to pc, hisuite starts. what can i do?
if i use hwota, the results is
writing 'recovery_ramdisk'...
FAILED (remote: partition length get error)
finished. total time: 0.529s
Dyzzy Solution
Guys I am now with some dyzzy solution but... with some logic to me, ok I will explain how I have my device alive again.
to be clear, this brick was caused because I want to have my device from ATT Mexico rebranded with dual sim ROM, then I lost oem info and cant go back 4G, so I installed Custom MORFUZ ROM 3.4, but I still without 4G and now with my second simcard deactivated, so... I tried to reflash with HWOTA the RNE-L03 rom single sim and... that was the mistake, after the procedure.. I got the semi-brick (since 2 days ago), ok then I was searching and reading a lot (and using more common sense haha) so, I needed to repair my device partitions because there was a mess triying to flash from another partition so, thats how I ended here, let's start:
*** First of all, prepare an SD card with the files for the HuRUpdater_0.3 mode, (just a tip, I leaved my phone run out of battery because I had the bootloop on the prompt screen that says that "your bootloader is unlocked and device is not trusted" so its easier to have acces to fastboot mode if you do this way)
- Step 1: I did the fastboot manual flashing unpacking my UPDATE.APP with HuaweiUpdateExtractor (see post#2)
once succesfully finished I rebooted my phone and still bricked
- Step 2: I entered fastboot mode and flashed the recovery image from CATUVA21 for Oreo (see post #9)
(IMPORTANT: DO NOT TRY TO ENTER ON TWRP RECOVERY RIGHT NOW OR YOU WILL NEED TO START AGAIN FROM STEP 1)
-Step 3: Connect the phone to energy (charger?, sorry I have very bad english) just 2 percent an unpplug, that's because if you can't go forward from here, you have to wait less to re-enter in fastboot and try another solution
-Steep 4: Here is the magic, press vol+ and plug the phone to your pc (yea, like entering eRecovery Wifi Mode) and Voilá!!! entered TWRP
-Steep 5: Flash HuRUpdater_0.3.zip, leave it finish, reboot device
Now you will be prompted to EMUI black screen with a message that says "partition is several damaged, you need to clean all partitions" you click on "clean all partitions" once finished, click in "Reboot System" be patient, for me was 4-6 minutes and some bootloops untill I heared the bootanimation tune and there is, initial config and now you are in a very dirty ROM but from here you can reflash a full rom, I hope It Help to anyone.