Hi, I have a problem while trying to flash root on my SM-T870(Samsung Tab S7).
I tried to flash the stock AP file with Odin but it didn't fix it. I think the issue was, that I didn't unlock the OEM bootloader.
Any way that I can fix
EDIT: I fixed it
Hello
I think you need to flash all three of AP, BL, & CSC files together in ODIN.
Related
I have downloaded my Rom from samfirmware, I checked the file and as usual there are PDA,Modem,CSC files in addition to that there is a bootloader file which Im not sure how to use it in odin 1.85, shall I put it in bootloader section? and if so shall I activate the "phone bootloader update" on left side of odin?
thanks
Unless you own an I/O edition of tab, I don't recommend bootloader file. As the bootloader file besides locking the bootloader (if repartition selected in odin) replaces fastboot with recovery in boot screen (keys combo). Hence be careful in flashing bootloader!
Place bootloader in bootloader, tick auto-reboot and Reset time only, and flash. The samfirmware roms for p7510 have been uploaded in development section by me to motivate discussions related to issues. If flashing a touchwiz rom, I recommend the arabic rom from development section. Its taken from samfirmware, but as their edition had issues I repacked it hence error free. The touchwiz in this rom is more polished release version!
Thanks for your help , already done after your instructions and successful
I have 3g version of the tablet and used the 4 files
PDA
CSC
Modem
bootloader
repartition and phone bootloader update not activated
and had a successful flashing
by the way the JPKG6 seems to have less problems as I dont see any auto rotation lags and more smooth scrolling in this rom
Hi Everyone ! When You have Flashed a custom recovery (TWRP,CMW,PHILLZ...) and also flashed CF Auto-Root, it arrives that you disable the DEVELOPER OPTIONS or OEM UNLOCK by mistake ! Then, when you reboot your phone, you get stuck at boot with this annoying message: 《 CUSTOM BINARY BLOCKED BY FRP LOCK 》which doesn't allow you to boot up your phone ! After trying a lot of methods on different forum,lot of methods requires you to flash stock firmware to get your phone working again ! I finally found a way to solve it and You will not LOOSE YOUR DATA and no need to flash FULL STOCK FIRMWARE. JUST FOLLOW THIS METHOD STEP BY STEP
*REQUIREMENTS
1. STOCK ENG Boot file
2. STOCK Recovery file
3. ODIN.exe
1. Download Stock SM-J510FN ENG Boot file from here : Links removed by mods
2. Download Stock SM-J510FN Recovery file from here :
3. #Put phone in download mode and open odin
#Click on BL and choose the Stock Recovery file you just downloaded
#Click on AP and choose the Stock EN Boot file you downloaded
#Make sure Auto-Reboot and F.Reset Time are checked in odin
#Click on start! It will take less than 1 minutes to to flash the files !
YOUR PHONE SHOULD BOOT NORMALLY:good:
NB: NO LOSS OF DATA
ONLY ROOT WILL BE LOSS
#NOW RE-ENABLE DEVELOPER OPTIONS and OEM UNLOCK and flash again your custom recovery and the CF Auto-Root file to get root permission again !
ENJOY !
i tried it, the phone booted up
but it's bricked
help would be appreciated
Nvssv6 said:
Hi Everyone ! When You have Flashed a custom recovery (TWRP,CMW,PHILLZ...) and also flashed CF Auto-Root, it arrives that you disable the DEVELOPER OPTIONS or OEM UNLOCK by mistake ! Then, when you reboot your phone, you get stuck at boot with this annoying message: 《 CUSTOM BINARY BLOCKED BY FRP LOCK 》which doesn't allow you to boot up your phone ! After trying a lot of methods on different forum,lot of methods requires you to flash stock firmware to get your phone working again ! I finally found a way to solve it and You will not LOOSE YOUR DATA and no need to flash FULL STOCK FIRMWARE. JUST FOLLOW THIS METHOD STEP BY STEP
*REQUIREMENTS
1. STOCK ENG Boot file
2. STOCK Recovery file
3. ODIN.exe
1. Download Stock SM-J510FN ENG Boot file from here : Links removed by mods
2. Download Stock SM-J510FN Recovery file from here :
3. #Put phone in download mode and open odin
#Click on BL and choose the Stock Recovery file you just downloaded
#Click on AP and choose the Stock EN Boot file you downloaded
#Make sure Auto-Reboot and F.Reset Time are checked in odin
#Click on start! It will take less than 1 minutes to to flash the files !
YOUR PHONE SHOULD BOOT NORMALLY:good:
NB: NO LOSS OF DATA
ONLY ROOT WILL BE LOSS
#NOW RE-ENABLE DEVELOPER OPTIONS and OEM UNLOCK and flash again your custom recovery and the CF Auto-Root file to get root permission again !
ENJOY !
Click to expand...
Click to collapse
Thread closed as ppc links not allowed and FRP tutorials are dark areas and guides for thieves
Hey
Yesterday I flashed a boot logo on my SM-G928F in TWRP. After that my phone doesn't boot into system or recovery anymore - there's always a blackscreen. I only can boot into download mode.
I tried to flash a stock-rom via Odin but that didn't helped - the same blackscreen, because a stock rom does not replace the boot logo.
I think I have to flash the stock boot logo ( https://drive.google.com/file/d/1378RQ5w_vAAmnQ3HB0FymZXWIm12T0Mg/view ) , but thats a zip which I can't flash via Odin.
There a two ways in my mind which could work:
1. Getting a tar.md5 file with the stock boot logo.
2. Getting a tool which allows to flash zips in download mode of the phone.
I really hope that someone could help me with my big problem.
Best regards
DGB
Hey there
I recommend to flash the firmware again but this time after flashing firmware flash the twrp and flash the zip via adb sideload ( a feature present in TWRP) as by adb sideload one is able to flash zip files as well
Or i recommend you to get to know the combination of keys that will help you to directly enter into recovery
Hope it will work
And if there is any problem let me know
As in the internet there are various ways by which a person can flash the custom rom and custom recovery via odin
Look at this link:-
http://www.lineageosrom.com/2017/07/how-to-flash-custom-rom-via-odin.html?m=1
nr10prashant said:
Hey there
I recommend to flash the firmware again but this time after flashing firmware flash the twrp and flash the zip via adb sideload ( a feature present in TWRP) as by adb sideload one is able to flash zip files as well
Or i recommend you to get to know the combination of keys that will help you to directly enter into recovery
Hope it will work
And if there is any problem let me know
As in the internet there are various ways by which a person can flash the custom rom and custom recovery via odin
Look at this link:-
http://www.lineageosrom.com/2017/07/how-to-flash-custom-rom-via-odin.html?m=1
Click to expand...
Click to collapse
Thank you for your answer but that didn't worked. The problem is that flashing the stock firmware doesn't replace or repair the boot image. So I've got a never ending blackscreen when I want to boot in system or TWRP/Recovery and that means that I'm not able to configure ADB Sideload.
I can only boot into download mode, nothing else.
I think the jpg of the boot logo I've installed was corrupted so it can't be loaded
You are in download mode so you have to press all the keys including the home button and once the download mode closes then press the "volume up key and power key and also the home button and then your phone will automatically reboot into recovery.
I know, I tried that multiple times but it doesn't work. Blackscreen... only a never ending blackscreen. The download mode is the only thing taht works. I have to flahs the old boot logo via download mode... but i don't know how
Wait for the battery to be drained out completely and then do what i said earlier
nr10prashant said:
Wait for the battery to be drained out completely and then do what i said earlier
Click to expand...
Click to collapse
I did. but it didn't work, too
I really need someone who is able to integrate the stock boot logo into a custom rom which can be flashed via Odin... Or I need a tool which allows to install zips in download mode. I tried adb sideload again but it didn't recognizes my phone when its not in recovery.
I really think that my S6 edge + is nearly died :crying:
Try to flash the firmware with the samsung smart swith.....
This will 100% works!!!!!4
Inderpreets said:
Try to flash the firmware with the samsung smart swith.....
This will 100% works!!!!!4
Click to expand...
Click to collapse
I know but Samsung removed this feature some months ago so I'm not able to do this
--- I know, it's from the German Samsung Support but it's a confirmation that Samsung removed this feature:
DGB100 said:
I know but Samsung removed this feature some months ago so I'm not able to do this
--- I know, it's from the German Samsung Support but it's a confirmation that Samsung removed this feature:
Click to expand...
Click to collapse
Not even flashing a factory firmware (4 files with pit) with repartition option selected?
What about a combination firmware and then a full stock FW?
яι¢αя∂σ said:
Not even flashing a factory firmware (4 files with pit) with repartition option selected?
What about a combination firmware and then a full stock FW?
Click to expand...
Click to collapse
I only tried to flash stock firmware with AP in Odin... and I tried stock rom with re-partition.
Where do I get those 4 files? I need XEU for my SM-G928F. It would be very nice if you could give me a more detailed instruction for this because I never worked with PIT...
get samfirm v0.3.6
On the model you put sm-g928f, region XEU, tick the binary nature box and press "check update". Download the resulting file, that is a factory firmware to do repairs in a 4 files format: bootloader, pda or ap, modem or cp and csc!
You will get this file:
SM-G928F_1_20180305151001_nsg8uwd0sh_fac.zip
Put each file in the correct field in odin!
About combination firmware, it needs to be same binary version as stock firmware already programed on phone! if first number on firmware version is a 3, combination FW need to be also bin 3!
G928FXXS4CRB4 if is 4, you need comb fw also in bin 4! if you downgrade you get odin error and a softbrick!
Was checking if any comb. fw is available, but i find only paid files for your phone model!
яι¢αя∂σ said:
get samfirm v0.3.6
On the model you put sm-g928f, region XEU, tick the binary nature box and press "check update". Download the resulting file, that is a factory firmware to do repairs in a 4 files format: bootloader, pda or ap, modem or cp and csc!
You will get this file:
SM-G928F_1_20180305151001_nsg8uwd0sh_fac.zip
Put each file in the correct field in odin!
About combination firmware, it needs to be same binary version as stock firmware already programed on phone! if first number on firmware version is a 3, combination FW need to be also bin 3!
G928FXXS4CRB4 if is 4, you need comb fw also in bin 4! if you downgrade you get odin error and a softbrick!
Was checking if any comb. fw is available, but i find only paid files for your phone model!
Click to expand...
Click to collapse
Thanks it worked for me but now I need a pit-file. Do you now where I get it?
EDIT: I found a pit-file for myself. Thank you very much for your help!
HTML:
https://drive.google.com/file/d/0BzyeAt2hy6XednpHZmhRUmtOMFk/view
DGB100 said:
Thanks it worked for me but now I need a pit-file. Do you now where I get it?
EDIT: I found a pit-file for myself. Thank you very much for your help!
HTML:
https://drive.google.com/file/d/0BzyeAt2hy6XednpHZmhRUmtOMFk/view
Click to expand...
Click to collapse
It worked means you got your phone back to normal or you could get the firmware using samfirm?
Pit file is always inside csc file on a 4 files fac firmware. Use the pit on firmware because the pit from your link can be from a early version of android and have different bits for partition sizes!
EDIT: Here, got the combination fw for the binary 4. IF your phone is already ok, don't use this!
DGB100 said:
I know but Samsung removed this feature some months ago so I'm not able to do this
--- I know, it's from the German Samsung Support but it's a confirmation that Samsung removed this feature:
Click to expand...
Click to collapse
SmartSwitch still works for my G925v.
яι¢αя∂σ said:
It worked means you got your phone back to normal or you could get the firmware using samfirm?
Pit file is always inside csc file on a 4 files fac firmware. Use the pit on firmware because the pit from your link can be from a early version of android and have different bits for partition sizes!
EDIT: Here, got the combination fw for the binary 4. IF your phone is already ok, don't use this!
Click to expand...
Click to collapse
I got my phone back to normal so thank you very much!
I have the same problem on my j2 prime I can only goto download mode and in odin tried to install stock firmware but got write fail..can you please help me with this error
Hi am sick right now caused i messed up i trying to google frp my sm-a315g/dsl device and it kept freezing so i decided to try flashing individual files (yeah I should get some good licks for that ) so i started with the bootloader file it was successful but now the phone won't turn on at all not even charging. I tried brom tp but i don't have the right scatter files. Can anyone help me SOLVE my problem that I caused.
What scatter???
You can't flash idividual files just like that.
You can only flash stock firmware, if you want other then you need to unlock bootloader and root your device!
So you need to flash latest right stock firmware with right region using ODIN in order to fix your device....
Teddy Lo said:
What scatter???
You can't flash idividual files just like that.
You can only flash stock firmware, if you want other then you need to unlock bootloader and root your device!
So you need to flash latest right stock firmware with right region using ODIN in order to fix your device....
Click to expand...
Click to collapse
The phone not reading to work with Odin thats why am trying via Brom TP unless there is another way to get it show on Odin, cause the phone is not powering on to enter download mode.
Check SP Flash Tool with MTK drivers for MediaTek Helio P65 (MT6768).
Factory images fastboot stock firmware to be downloaded (not odin)
I wanted to root my A52 5G (SM-A526B) i first unlocked the bootloader
then i downloaded my Firmware with Frija and patched the boot.img with Magisk then i went into download mode and flashed it with Odin
Odin gave me a Green PASS Message and i knew i needed to factory reset with recovery mode but i couldnt get into it then i got into a boot loop with the Samsung Galaxy Bootlogo
then i tried to flash Twrp with odin to factory reset because i couldnt get into the stock recovery mode Odin again gave me a PASS Message then i tried to get into recovery mode but it still didnt work and now im trying to flash Stock Firmware but cant get it to work what should i do
The picture is what happens when i try to boot please help me to flash stock firmware
When i try to flash Stock Firmware it fails at the very end on vbmeta.img
The a52 5g doesn't have twrp currently. Also, you might have flashed the incorrect firmware.
Plus, just for you to know, you do not need to do factory reset after flashing your firmware. What steps have you taken to flash this firmware? How did you patch magisk? Show the steps so we can help you cuz you might have done something wrong
Ok it seems that your mistake here is that you are trying to flash boot.img. so what you actually suppose to do is to download the firmware, take the AP file from the firmware(don't extract the file!). Then, move the file to your phone and download magisk on your phone. You will see that magisk is offering you to install magisk on the top corner of your screen. You need to choose to patch the file, the AP file. Once magisk done, on your file explorer(probably in downloads) a file called "magisk_patched xxxx.tar" (the xxxx representing the version of magisk). Take this file and copy it to your computer, and on Odin, instead of using the AP file, use the magisk file. Boom, done. Now first, we need to recover your phone to its original condition. Take the AP file and flash it(not the boot.img!)
DownBaddie said:
When i try to flash Stock Firmware it fails at the very end on vbmeta.img
Click to expand...
Click to collapse
Try flashing other parts of firmware, not just AP
i.e. BL, CSC and CP
But don't add home_csc (USERDATA).
If all fails, you can use EDL mode to flash firmware
How To Flash Qualcomm MBN Firmware Via QPST tool
If your device is based on Qualcomm’s CPU and you’re searching for an easy way to flash the device’s stock ROM, here ends your search. You just need the QPST tool and the instructions here to guide you. Follow the instructions below to get you started. Prerequisites: Qualcomm QPST tool –...
www.leakite.com