I have a passcode locked LG Rebel 4 - LML212VL and cant get into download mode.. Ideas?
I need to recover a clients data and the only way for me to do this is through LGLAF or with a box that can remove the pattern lock.. However all ive managed to get to is recovery and that is it.. No download mode.. Being a Tracfone i know fastboot is disabled but download mode should not be. Now seeing that it is passcode locked is there a chance a security feature is blocking me from getting to Download mode??
Any help is much appreciated.
@noidodroid
If device is accesable in ADB mode, why don't pull out the data in question?
Code:
adb devices
adb pull <remote data location> <local location>
jwoegerbauer said:
@noidodroid
If device is accesable in ADB mode, why don't pull out the data in question?
Code:
adb devices
adb pull <remote data location> <local location>
Click to expand...
Click to collapse
Yeah if I could enable ADB i would do this. However i'm stuck on passcode screen. Know any ways?
noidodroid said:
I have a passcode locked LG Rebel 4 - LML212VL and cant get into download mode.. Ideas?
I need to recover a clients data and the only way for me to do this is through LGLAF or with a box that can remove the pattern lock.. .
Click to expand...
Click to collapse
The LG tools like LGUP will change the mode when necessary.
They do it by sending an AT command... AT%DLOAD
What next then? The data is still encrypted...
:fingers-crossed:
@noidodroid or whoever might need this.
Here is how to use AT...
First check in Device Manager (devmgmt. msc) what COM port LG is using - under the Modems.
Then use Putty terminal or similar program to give the command(s).
Or "blindly" by using dos prompt. (You don't see the answers. )
First get the port to use and then echo the command.
Code:
[B]reg query HKLM\hardware\devicemap\SERIALCOMM[/B]
\Device\LGANDNET[B]MDM0[/B] REG_SZ [B]COM##[/B] <--use this
\Device\LGANDNETDIAG1 REG_SZ COM$$
[B]echo AT%DLOAD>\\.\COM##[/B]
AT commands taken from my LG's /system/bin/atd , laf probably have some more...
AT#CLS, AT$LGAPP, AT$NSRI, AT$PRL, AT%AATEND, AT%AATFULL, AT%AATINIT, AT%AATORDERSET, AT%AATSET, AT%AATSTART, AT%ACCEL, AT%ACS, AT%ALC, AT%ANTCONF, AT%ANTINFO, AT%BAROMETER, AT%BATL, AT%BATMP, AT%BATT, AT%BATTLEVEL, AT%BATTTEMP, AT%BATTTEMPINFO, AT%BCPE, AT%BCPL, AT%BLEDSTART, AT%BLEDSTOP, AT%BTAD, AT%BTLER, AT%BTLET, AT%BTTM, AT%BUILDDATE, AT%CALCK, AT%CALDT, AT%CAMP, AT%CAMPREQ, AT%CHANGEWTR, AT%CHARGE, AT%CHARGINGMODEOFF, AT%CHCOMP, AT%CHECKFOTAPACKAGE, AT%CHIPSET, AT%CLOCKSTATUSCPU, AT%CLOCKSTATUSGPU, AT%CLOCKSTATUSSETCPU, AT%CMDLOCK, AT%CMPCPUFULL, AT%CODECRC, AT%COMPASS, AT%COVERDETECT, AT%CPUFULL, AT%CPUFULLINFO, AT%CSN, AT%DATST, AT%DBCHK, AT%DBCOPY, AT%DBDUMP, AT%DCTEST, AT%DETACH, AT%DEVICEID, AT%DEVICETEST, AT%DLOAD, AT%DTLOGCAT, AT%EARJACK, AT%ECALL, AT%EFUSECHECK, AT%EFUSEENABLE, AT%EFUSERESULT, AT%EFUSEVERIFICATION, AT%EMMCSIZE, AT%EMMREJECT, AT%EMT, AT%ENCRYPT, AT%ENCRYPTMOUNTDATA, AT%ENCRYPTONBOOT, AT%ETM, AT%FBOOT, AT%FIDOCHECK, AT%FIDOERASE, AT%FIDOWRITE, AT%FILECRC, AT%FKPD, AT%FLIGHT, AT%FMR, AT%FPCKBOARD, AT%FPRICRC, AT%FPRUBSTAMP, AT%FPSPI, AT%FPZONE, AT%FRST, AT%FRSTSTATUS, AT%FSM, AT%FSMDRESULT, AT%FSMMIC, AT%FSMMODE, AT%FSMRESULT, AT%FSMSTART, AT%FSMSTATUS, AT%FSMVERSION, AT%FTM, AT%FTMMAGIC, AT%FUELRST, AT%FUELVAL, AT%FUSE, AT%FUSECHECK, AT%FUSG, AT%GERANCAPDISABLE, AT%GKPD, AT%GNSS, AT%GNSS1, AT%GPIO, AT%GREBOOTSTATUSCLR, AT%GSTATUS, AT%GSTATUSCLR, AT%GWIFI, AT%GWLANSSID, AT%GYRO, AT%HALLIC, AT%HDCP, AT%HDCPERASE, AT%HDCPID, AT%HDCPST, AT%HMEXT, AT%HWVER, AT%IDDE, AT%IMEI, AT%IMEI2, AT%IMEI3, AT%IMPL, AT%IMSTESTMODE, AT%INFO, AT%IRRC, AT%ISSIM, AT%KCAL, AT%KEYLOCK, AT%KPHVERSION, AT%KSANTITHEFTSTATUS, AT%KSCHECKLOCK, AT%KSDOUNLOCK, AT%KSGETEXTRA, AT%KSGETLAFLOCK, AT%KSOSTYPE, AT%KSSERIALNO, AT%KSTYPE, AT%KSUNLOCKSTATUS, AT%KSWITCH, AT%LCATT, AT%LCD, AT%LCDCAPTURE, AT%LCIMSSETCFG, AT%LED, AT%LEDON, AT%LGANDROID, AT%LGATSERVICE, AT%LGPWD, AT%LOGSAVE, AT%LOGSERVICE, AT%LTEAUTHFAIL, AT%LTECALL, AT%LTERFMODE, AT%LTL, AT%LTR, AT%LTRST, AT%MAC, AT%MAINCAMERAID, AT%MAXCPU, AT%MAXCT, AT%MDATE, AT%MDMLOG, AT%MDMPVS, AT%MEID, AT%MIMOANTCHECK, AT%MINIOS, AT%MLT, AT%MMCCONTENTSINTEGRITY, AT%MMCFACTORYFORMAT, AT%MMCFORMAT, AT%MMCISFORMATTED, AT%MMCTOTALSIZE, AT%MMCUSEDSIZE, AT%MOBICORE, AT%MOBICOREERASE, AT%MODELNAME, AT%MODEMCHK, AT%MODEMRESET, AT%MOT, AT%MPDECISION, AT%MPT, AT%MSN, AT%MTSLOG, AT%MTSLOGERS, AT%MTSLOGGET, AT%NCM, AT%NFC, AT%NTCODE, AT%NTCODECHANGE, AT%NTSWAP, AT%ONECMD, AT%OPNAMEREAD, AT%OPRESIZECHECK, AT%OSPPWDINIT, AT%OSVER, AT%PCBREV, AT%PMRST, AT%PNUM, AT%POWEROFF, AT%PRECPUFULL, AT%PROCCAT, AT%PROPTCAT, AT%PROXIMITY, AT%PROXIMITYCAL, AT%PSCAT, AT%PSELFDE, AT%PST, AT%PTNCLR, AT%QEM, AT%QFUSEVERI, AT%RADIATIONRESULT, AT%RAMSIZE, AT%RCT, AT%REATTACH, AT%RESTART, AT%RFDEVCHK, AT%RPMBMANUALPROVISIONING, AT%RPMBSTATUSCHECK, AT%RTC, AT%SAATRESULT, AT%SATPC, AT%SATPC2, AT%SCHK, AT%SDCHECK, AT%SELFDRESULT, AT%SEQCPUFULL, AT%SERIALNO, AT%SETREV, AT%SIMID, AT%SIMIMSI, AT%SIMOFF, AT%SIMPWDINIT, AT%SIMTRAY, AT%SLEN, AT%SLTYPE, AT%SPTCHK, AT%SPTLOCK, AT%SPTUNLOCK, AT%STARTDAYCHECK, AT%STARTFOTAPACKAGE, AT%SUBCAMERAID, AT%SUFFIX, AT%SULC, AT%SURV, AT%SWCV, AT%SWFV, AT%SWOV, AT%SWV, AT%SYSCAT, AT%TESTPATTERN, AT%TETHER, AT%THEME, AT%THERMALENGINE, AT%TOTALCRC, AT%TOUCHFWVER, AT%TOUCHLOG, AT%TSENS, AT%ULCV, AT%ULCW, AT%USB, AT%USBIDADC, AT%USBMODE, AT%USERDATASIZE, AT%VCOIN, AT%VLC, AT%VSLT, AT%VSLT2, AT%VSLT3, AT%VSLT4, AT%VZWAPNE, AT%VZWHM, AT%VZWIOTHM, AT%WALLPAPER, AT%WEBFLAG, AT%WLAN, AT%WLANCH, AT%WLANPING, AT%WLANR, AT%WLANT, AT%WORKFRSTMODEON, AT%XOTEMP, AT+CCLK, AT+CFUN, AT+CGMI, AT+CGMM, AT+CGMR, AT+CNUM, AT+CSDF, AT+CSO, AT+ESLP, AT+ESUO, AT+FUMO, AT+GCI, AT+GMI, AT+GMM, AT+LED, AT+MTC, AT+OMADM, AT+PRL, [email protected], [email protected], [email protected]
CXZa said:
@noidodroid or whoever might need this.
Here is how to use AT...
First check in Device Manager (devmgmt. msc) what COM port LG is using - under the Modems.
Then use Putty terminal or similar program to give the command(s).
Or "blindly" by using dos prompt. (You don't see the answers. )
First get the port to use and then echo the command.
Code:
[B]reg query HKLM\hardware\devicemap\SERIALCOMM[/B]
\Device\LGANDNET[B]MDM0[/B] REG_SZ [B]COM##[/B] <--use this
\Device\LGANDNETDIAG1 REG_SZ COM$$
[B]echo AT%DLOAD>\\.\COM##[/B]
AT commands taken from my LG's /system/bin/atd , laf probably have some more...
AT#CLS, AT$LGAPP, AT$NSRI, AT$PRL, AT%AATEND, AT%AATFULL, AT%AATINIT, AT%AATORDERSET, AT%AATSET, AT%AATSTART, AT%ACCEL, AT%ACS, AT%ALC, AT%ANTCONF, AT%ANTINFO, AT%BAROMETER, AT%BATL, AT%BATMP, AT%BATT, AT%BATTLEVEL, AT%BATTTEMP, AT%BATTTEMPINFO, AT%BCPE, AT%BCPL, AT%BLEDSTART, AT%BLEDSTOP, AT%BTAD, AT%BTLER, AT%BTLET, AT%BTTM, AT%BUILDDATE, AT%CALCK, AT%CALDT, AT%CAMP, AT%CAMPREQ, AT%CHANGEWTR, AT%CHARGE, AT%CHARGINGMODEOFF, AT%CHCOMP, AT%CHECKFOTAPACKAGE, AT%CHIPSET, AT%CLOCKSTATUSCPU, AT%CLOCKSTATUSGPU, AT%CLOCKSTATUSSETCPU, AT%CMDLOCK, AT%CMPCPUFULL, AT%CODECRC, AT%COMPASS, AT%COVERDETECT, AT%CPUFULL, AT%CPUFULLINFO, AT%CSN, AT%DATST, AT%DBCHK, AT%DBCOPY, AT%DBDUMP, AT%DCTEST, AT%DETACH, AT%DEVICEID, AT%DEVICETEST, AT%DLOAD, AT%DTLOGCAT, AT%EARJACK, AT%ECALL, AT%EFUSECHECK, AT%EFUSEENABLE, AT%EFUSERESULT, AT%EFUSEVERIFICATION, AT%EMMCSIZE, AT%EMMREJECT, AT%EMT, AT%ENCRYPT, AT%ENCRYPTMOUNTDATA, AT%ENCRYPTONBOOT, AT%ETM, AT%FBOOT, AT%FIDOCHECK, AT%FIDOERASE, AT%FIDOWRITE, AT%FILECRC, AT%FKPD, AT%FLIGHT, AT%FMR, AT%FPCKBOARD, AT%FPRICRC, AT%FPRUBSTAMP, AT%FPSPI, AT%FPZONE, AT%FRST, AT%FRSTSTATUS, AT%FSM, AT%FSMDRESULT, AT%FSMMIC, AT%FSMMODE, AT%FSMRESULT, AT%FSMSTART, AT%FSMSTATUS, AT%FSMVERSION, AT%FTM, AT%FTMMAGIC, AT%FUELRST, AT%FUELVAL, AT%FUSE, AT%FUSECHECK, AT%FUSG, AT%GERANCAPDISABLE, AT%GKPD, AT%GNSS, AT%GNSS1, AT%GPIO, AT%GREBOOTSTATUSCLR, AT%GSTATUS, AT%GSTATUSCLR, AT%GWIFI, AT%GWLANSSID, AT%GYRO, AT%HALLIC, AT%HDCP, AT%HDCPERASE, AT%HDCPID, AT%HDCPST, AT%HMEXT, AT%HWVER, AT%IDDE, AT%IMEI, AT%IMEI2, AT%IMEI3, AT%IMPL, AT%IMSTESTMODE, AT%INFO, AT%IRRC, AT%ISSIM, AT%KCAL, AT%KEYLOCK, AT%KPHVERSION, AT%KSANTITHEFTSTATUS, AT%KSCHECKLOCK, AT%KSDOUNLOCK, AT%KSGETEXTRA, AT%KSGETLAFLOCK, AT%KSOSTYPE, AT%KSSERIALNO, AT%KSTYPE, AT%KSUNLOCKSTATUS, AT%KSWITCH, AT%LCATT, AT%LCD, AT%LCDCAPTURE, AT%LCIMSSETCFG, AT%LED, AT%LEDON, AT%LGANDROID, AT%LGATSERVICE, AT%LGPWD, AT%LOGSAVE, AT%LOGSERVICE, AT%LTEAUTHFAIL, AT%LTECALL, AT%LTERFMODE, AT%LTL, AT%LTR, AT%LTRST, AT%MAC, AT%MAINCAMERAID, AT%MAXCPU, AT%MAXCT, AT%MDATE, AT%MDMLOG, AT%MDMPVS, AT%MEID, AT%MIMOANTCHECK, AT%MINIOS, AT%MLT, AT%MMCCONTENTSINTEGRITY, AT%MMCFACTORYFORMAT, AT%MMCFORMAT, AT%MMCISFORMATTED, AT%MMCTOTALSIZE, AT%MMCUSEDSIZE, AT%MOBICORE, AT%MOBICOREERASE, AT%MODELNAME, AT%MODEMCHK, AT%MODEMRESET, AT%MOT, AT%MPDECISION, AT%MPT, AT%MSN, AT%MTSLOG, AT%MTSLOGERS, AT%MTSLOGGET, AT%NCM, AT%NFC, AT%NTCODE, AT%NTCODECHANGE, AT%NTSWAP, AT%ONECMD, AT%OPNAMEREAD, AT%OPRESIZECHECK, AT%OSPPWDINIT, AT%OSVER, AT%PCBREV, AT%PMRST, AT%PNUM, AT%POWEROFF, AT%PRECPUFULL, AT%PROCCAT, AT%PROPTCAT, AT%PROXIMITY, AT%PROXIMITYCAL, AT%PSCAT, AT%PSELFDE, AT%PST, AT%PTNCLR, AT%QEM, AT%QFUSEVERI, AT%RADIATIONRESULT, AT%RAMSIZE, AT%RCT, AT%REATTACH, AT%RESTART, AT%RFDEVCHK, AT%RPMBMANUALPROVISIONING, AT%RPMBSTATUSCHECK, AT%RTC, AT%SAATRESULT, AT%SATPC, AT%SATPC2, AT%SCHK, AT%SDCHECK, AT%SELFDRESULT, AT%SEQCPUFULL, AT%SERIALNO, AT%SETREV, AT%SIMID, AT%SIMIMSI, AT%SIMOFF, AT%SIMPWDINIT, AT%SIMTRAY, AT%SLEN, AT%SLTYPE, AT%SPTCHK, AT%SPTLOCK, AT%SPTUNLOCK, AT%STARTDAYCHECK, AT%STARTFOTAPACKAGE, AT%SUBCAMERAID, AT%SUFFIX, AT%SULC, AT%SURV, AT%SWCV, AT%SWFV, AT%SWOV, AT%SWV, AT%SYSCAT, AT%TESTPATTERN, AT%TETHER, AT%THEME, AT%THERMALENGINE, AT%TOTALCRC, AT%TOUCHFWVER, AT%TOUCHLOG, AT%TSENS, AT%ULCV, AT%ULCW, AT%USB, AT%USBIDADC, AT%USBMODE, AT%USERDATASIZE, AT%VCOIN, AT%VLC, AT%VSLT, AT%VSLT2, AT%VSLT3, AT%VSLT4, AT%VZWAPNE, AT%VZWHM, AT%VZWIOTHM, AT%WALLPAPER, AT%WEBFLAG, AT%WLAN, AT%WLANCH, AT%WLANPING, AT%WLANR, AT%WLANT, AT%WORKFRSTMODEON, AT%XOTEMP, AT+CCLK, AT+CFUN, AT+CGMI, AT+CGMM, AT+CGMR, AT+CNUM, AT+CSDF, AT+CSO, AT+ESLP, AT+ESUO, AT+FUMO, AT+GCI, AT+GMI, AT+GMM, AT+LED, AT+MTC, AT+OMADM, AT+PRL, [email protected], [email protected], [email protected]
Click to expand...
Click to collapse
Right on man! These are definitely helpful. I was using some AT tools and a script to run all commands in a database i have to see which were compatible with certain LG phones but I never got to finish the project. Now my only problem with this phone. here is i get no modem / com ports. I think it is possibly a security feature? I could see LG locking out people from download mode when phone is passcode locked unless they goto recovery and wipe it...
I need to find another way to do this or a way using FWUL, MAID etc (once modem recognized) unless someone knows how to get the modem to work.
Thanks for the wonderful information bro i will definitely save it and make use of it. Love toying around with AT commands, always have.
noidodroid said:
Now my only problem with this phone. here is i get no modem / com ports. I think it is possibly a security feature? I could see LG locking out people from download mode when phone is passcode locked unless they goto recovery and wipe it...
I need to find another way to do this or a way using FWUL, MAID etc (once modem recognized) unless someone knows how to get the modem to work.
Click to expand...
Click to collapse
Tried with my LG10 2017 m250n. Even with secure startup the com ports work, adb doesn't though.... Also recovery shows some COM ports. It's shows it as LG device, but there is no driver installed. Maybe reinstalling the driver package would help, IDK..
edit:
Those recovery COM ports show only if you enter recovery from laf download mode and quite shortly too.
HKEY_LOCAL_MACHINE\hardware\devicemap\SERIALCOMM
\Device\LGSIDIAG1 REG_SZ COMxx
\Device\LGSIMDM0 REG_SZ COMyy
Also noticed that both LGANDNETMDM# or LGANDNETDIAG# device will do... goes to DLOAD mode..
CXZa said:
Tried with my LG10 2017 m250n. Even with secure startup the com ports work, adb doesn't though.... Also recovery shows some COM ports. It's shows it as LG device, but there is no driver installed. Maybe reinstalling the driver package would help, IDK..
edit:
Those recovery COM ports show only if you enter recovery from laf download mode and quite shortly too.
HKEY_LOCAL_MACHINE\hardware\devicemap\SERIALCOMM
\Device\LGSIDIAG1 REG_SZ COMxx
\Device\LGSIMDM0 REG_SZ COMyy
Also noticed that both LGANDNETMDM# or LGANDNETDIAG# device will do... goes to DLOAD mode..
Click to expand...
Click to collapse
Yeah I have never had an issue getting those ports until this clients passcode locked tracfone. I think tracfone locks down everything.
I know there are some methods of getting LG's into certain modes on zero % battery but haven't tried this yet.
Unfortunately and i guess fortunately lol this phone went back to the client. They are having to go back through notes to find possible entries. Good luck to them.
Thanks for the help everyone!
CXZa said:
Tried with my LG10 2017 m250n. Even with secure startup the com ports work, adb doesn't though.... Also recovery shows some COM ports. It's shows it as LG device, but there is no driver installed. Maybe reinstalling the driver package would help, IDK..
edit:
Those recovery COM ports show only if you enter recovery from laf download mode and quite shortly too.
HKEY_LOCAL_MACHINE\hardware\devicemap\SERIALCOMM
\Device\LGSIDIAG1 REG_SZ COMxx
\Device\LGSIMDM0 REG_SZ COMyy
Also noticed that both LGANDNETMDM# or LGANDNETDIAG# device will do... goes to DLOAD mode..
Click to expand...
Click to collapse
At what point is recovery showing the com ports? And are you just checking Device Manager or? And how to get into laf download mode to enter recovery from? LAF download is this the normal old download mode? If so i have never been able to switch over to recovery unless it is using some AT command that works (i have tried a handful and none work in download mode so far - LG Phoenix 4)
Also thank you 1000% again for the AT commands. I already found what i need and client is bringing phone back to me so i will give it a whirl and see what happens. Already locking up various LG phones here just to try it out.. IF you have any confirmed working AT commands and such lmk privately if you want and when done i can swap with you what all I have found to work the most. I was reading on security forums about how repairing imei, unlocking and other such actions are taken out using serial port for the most part and can be done in terminal (well it is one way) but not a lick of more information have i found on the topics yet. Just 3 white hat security forums. heh
Right when recovery starts for maybe minute or two. Doing something in recovery which prevents continuing to the normal boot doesn't help. Shows in device manager.
In MTK devices one can run multi_init in laf mode and as it fails it will go to the recovery. In Snapdragons is there such? IDK, but you might be able mount a sdcard formatted as ext4 and try to run it from there. I have run some programs that way - I believe, but cannot really remember much. What I did I tested if I could modify multi_init to boot into bootloader. It run but just normal boot happened. But maybe it could be modified to boot into edl?? Renaming it to something that can be run maybe needed...
Interesting to see what you've found out about AT commands, if you're willing to share.
PM if so, LG is watching me already...
(happened to found the LGUP v1.17 and shared here, it's package was removed next day - plus some others...)
Very cool. I never thought of doing any of that. I especially like the EDL idea. I might run some of that by eliwiggy a previous admin and wiz with Samsung devices to see what he says also.
I had a break through in FRP removal using AT commands recently. I found a way to get out from some locked LG devices using SVC stuff and AT commands. Nobody is doing this AFAIK... As for screen locks no success yet on newer devices. I will get in touch with you and we can chat.
Hmm so you can't get into download mode. Why don't you reset the phone first then connect to the internet when it asks and then find a way to open up a browser. If you can open up the browser you can download and install apk's and what not. That's how I FRP unlocked my Aristo 2.
I have done this already. No way into browser on the device i tried it on. Weird device too.. MS210.. I have been able to bypass this device no problem before until someone updated the firmware i think.. Mindboggling..
Anywho here is how i bypassed it and so far i think this method should work on all similar. I couldn't get security patch level as i had to give device back to the client. :-/
New Way to Bypass LG - Google Factory Reset Protetion on VARIOUS Devices!!
New Way to Bypass LG - Google Factory Reset Protection on VARIOUS Devices! Ignore the poor grammar, typos etc.. Bits and pieces from notes. --needed-- bluetooth (needed) data cable (needed) computer (needed) Factory reset phone, forward...
forum.xda-developers.com
Credits for app goto those Yemen Fellas who have so far been able to bypass anything in front of them LG/Samsung Carrier - Sprint!! Tracfone --> FRP/Unlock
Credits also to @CXZa as if it weren't for him i probably would not have looked deeper into AT commands.
noidodroid said:
I have done this already. No way into browser on the device i tried it on. Weird device too.. MS210.. I have been able to bypass this device no problem before until someone updated the firmware i think.. Mindboggling..
Anywho here is how i bypassed it and so far i think this method should work on all similar. I couldn't get security patch level as i had to give device back to the client. :-/
New Way to Bypass LG - Google Factory Reset Protetion on VARIOUS Devices!!
New Way to Bypass LG - Google Factory Reset Protection on VARIOUS Devices! Ignore the poor grammar, typos etc.. Bits and pieces from notes. --needed-- bluetooth (needed) data cable (needed) computer (needed) Factory reset phone, forward...
forum.xda-developers.com
Credits for app goto those Yemen Fellas who have so far been able to bypass anything in front of them LG/Samsung Carrier - Sprint!! Tracfone --> FRP/Unlock
ALL YOU HAVE TO DO IS FACTORY RESET....THEN DURING SET UP TURN WIFI ON....THEN HOLD NEXT AND WIFI SWITCH AT SAME TIME...AND IT BYPASSES
Click to expand...
Click to collapse
Finish by setting lock pin then skip to start up...then developer options oem unlock and usb debugging...then factory reset from settings menu....$$$$
KtownJeff said:
Finish by setting lock pin then skip to start up...then developer options oem unlock and usb debugging...then factory reset from settings menu....$$$$
Click to expand...
Click to collapse
Bypass FRP LG Velvet Android 10 - Bypass frp Without PC
How to Remove FRP LG Velvet Android, How to bypass google account LG Velvet Android 10, Remove FRP LG Velvet Android ? All process can be done easily from
www.techeligible.com
Nice. I will check it out.
KtownJeff said:
Bypass FRP LG Velvet Android 10 - Bypass frp Without PC
How to Remove FRP LG Velvet Android, How to bypass google account LG Velvet Android 10, Remove FRP LG Velvet Android ? All process can be done easily from
www.techeligible.com
Click to expand...
Click to collapse
I wonder if anyone has found a way to carrier unlock these LG Velvet devices yet.. From what i hear nobody has. But there is always someone or some team.
If you just reset it and once you get to the wifi select screen, just click the button to turn wifi off and the next in bottom right at same time. It will continue setup offline and let you choose pin to get in.
Hey guys I’ve been here once or twice before but it’s been a while. I have some in the ass and I need your help please. I’ve been working at unlocking the boot loader on my Motorola Moto G power 2021 for two months now. The reasoning is for that I have no PC nor desktop rather one of my old android phones (Motorola Moto G7 Optimo) That I have had, Trying to figure out how to unlock my boot loader on my Motorola Moto G power 2021. I managed to unlock the boot loader finally but now I’m having issues with trying to install TWRP. My question is is that is there another custom room that I can install with two androids connected to USB – C double cable? I’ve been waiting for a long time to get my phone routed, please help and thanks
If you have one android rooted with magisk, there is an ADB/Fastboot Magisk module that might work for that, but I've never actually tried it. But I'm pretty sure one would have to be rooted. Another option might be to install linux on your phone. I have manjaro linux installed on mine but, again, it is limited without root because of selinux policy. With root, that can be disabled.
I also just noticed adb and fastboot can be installed in termux without root with
pkg install android-tools
You might try that.
If it workS, then YES, you can root without pc. Just 2 Android phones and a doubLe type c cable.
bryzone25 said:
but now I’m having issues with trying to install TWRP.
Click to expand...
Click to collapse
Don't install the TWRP we have now. Just boot it to use it with adb shell commands or a mouse. If you install it you'll get a bootloop, Dude says. I had to use it to extract my kernel for rooting.
Aaaannd the story thickens…. I ended up unlocking the boot loader with the two android phones and a USB – C type. However when I tried to flash Magisk, it flip my phone into a boot loop. Now, Me being the rookie that I am and trying to progress far too quickly, I Have relocked my boot loader and now I have a message which says no valid operating system can be found, will not boot.
Can someone please put me out of my misery and just go ahead and say that I am screwed?
Try to unlock your bootlloader againDamn I can't even type in here. Fgn xda is throwing up an ad over the typing area every time I make a cursor. Ok it finally stopped as I took a screenshot.
Now why on earth are you people trying to relock your bootloaders? I've rarely heard of such a thing and only to try to claim warranty, but I've been here for 2 days and already found 2 people with relocked (possible) bricks on this phone. And there aren't even many people here yet. What gives?
Don't worry yet. I think you're in better shape than the other guy.
If you still have your unlock email try to unlock it again with the same code. If you don't, or that doesn't work run get_unlock_data again and request another code.
BTW, I've never done this twice. So it might not work. If it doesn't, there is another option. Just come back and tell us how it went.
What carrier is your phone?
arkansawdave74 said:
Try to unlock your bootlloader againDamn I can't even type in here. Fgn xda is throwing up an ad over the typing area every time I make a cursor. Ok it finally stopped as I took a screenshot.
Now why on earth are you people trying to relock your bootloaders? I've rarely heard of such a thing and only to try to claim warranty, but I've been here for 2 days and already found 2 people with relocked (possible) bricks on this phone. And there aren't even many people here yet. What gives?
Don't worry yet. I think you're in better shape than the other guy.
If you still have your unlock email try to unlock it again with the same code. If you don't, or that doesn't work run get_unlock_data again and request another code.
BTW, I've never done this twice. So it might not work. If it doesn't, there is another option. Just come back and tell us how it went.
What carrier is your phone?
Click to expand...
Click to collapse
arkansawdave74 said:
so yeah I tried it again but the boot loader is still locked however I think the partitions are messed up after I was trying to flash magic and it fell right into a boot loop. Somehow it has actually gotten better and not continuously boot looping I can stay in fast boot but it won’t burn into anything else or power off unless it runs out of battery. But I do have the same code but it’s not taking hit it because OEM unlocking on developer mode is still locked.
Click to expand...
Click to collapse
So what other plans do you have I’m very curious to know? Also I am through straight talk on a TracFone. I’m also trying to unlock the boot loader on my Moto G7 optimo and I’ve tried the unlock data through Motorola and it says it can’t be unlocked but I think that’s b******t
Bry2025 said:
I’ve tried the unlock data through Motorola and it says it can’t be unlocked but I think that’s b******t
Click to expand...
Click to collapse
That used to happen to me a lot in the olden days when I used Windows and would manually type the code. I never know if they are Os or zeros. Now that I use linux I just copy/paste the code quick and easy. If you know that phone with that carrier can be unlocked, keep trying. In Android I know you can copy/paste from the terminal. I hear some carriers make you wait so long before unlocking too, although I've never had a phone with that problem. A good friend told me just the other day he had a Boost phone that they made him wait 6 months to unlock.
As far as plans, I got this phone by accident and dropped and broke the screen the 1st day I had it, before the case arrived. When the case arrived, it was a case for the G9 Power, which I thought this phone was when I ordered it. So, next month I will order the G9 Power since I already have a case and screen protector for it. My last phone was the G8 Stylus (sofiap) and this "Power" just doesn't have the same great battery life. I also had the G7 Power (ocean) and it had excellent battery life. I meant to get the G9 Power for the 6000 mAh battery, but with it's higher resolution screen it's probably no better than this Power. I think all "Power"s should have a 720P screen for the better battery life. or at least a switch to select the resolution you want like on my Galaxy S7.
This phone needs some ROMs though, so if I can find the time, I will do my best to give it a couple, if luck is on my side. Maybe a Resurrection Remix and a crDroid or Bliss. But really, it's whatever I can get to build, so maybe none. Lol.
Bry2025 said:
So what other plans do you have I’m very curious to know? Also I am through straight talk on a TracFone. I’m also trying to unlock the boot loader on my Moto G7 optimo and I’ve tried the unlock data through Motorola and it says it can’t be unlocked but I think that’s b******t
Click to expand...
Click to collapse
I think there's still hope for you. I'm trying to figure out which stock firmware version your phone came with. If we can figure that out, I think you can flash and boot it even with a locked bootloader. What splash screen and boot animation does it have? Is it tracphone? I see a US Cellular version. When you boot to the bootloader what does the 1st white line say on the lower left? The BL line?
Also, I assume you got fastboot working phone to phone. I've tried 3 different adb/fastboot installations and can't get it to work (Magisk module, the one from termux pkg install android-tools, and one from github.). Can you tell me how you did it?
arkansawdave74 said:
That used to happen to me a lot in the olden days when I used Windows and would manually type the code. I never know if they are Os or zeros. Now that I use linux I just copy/paste the code quick and easy.
Click to expand...
Click to collapse
I've used copy and paste on windows to unlock several moto devices.
It's the only sane way to do it.
sd_shadow said:
I've used copy and paste on windows to unlock several moto devices.
It's the only sane way to do it.
Click to expand...
Click to collapse
Yeah, I hear there is some trick to do it. Maybe in the new powershell (I've never tried it), but highlighting some text and right clicking to copy doesn't work in a command prompt, or it didn't 6 years ago. Did they add that functionality?
arkansawdave74 said:
Yeah, I hear there is some trick to do it. Maybe in the new powershell (I've never tried it), but highlighting some text and right clicking to copy doesn't work in a command prompt, or it didn't 6 years ago. Did they add that functionality?
Click to expand...
Click to collapse
I think I used copy/paste in cmd.exe since windows 7, but I don't know when it started working.
Well Damn....now I have one less way to insult Windows. Hey @sd_shadow , you would sure know...can you flash and boot the original firmware that came on your phone (same software channel) with a locked bootloader? Seems like you could but I've never tried it.
And @Bry2025 do you have USB Debugging enabled in Developer Options?
arkansawdave74 said:
Well Damn....now I have one less way to insult Windows. Hey @sd_shadow , you would sure know...can you flash and boot the original firmware that came on your phone (same software channel) with a locked bootloader? Seems like you could but I've never tried it.
And @Bry2025 do you have USB Debugging enabled in Developer Options?
Click to expand...
Click to collapse
Moto devices can be finicky.
You should be able to flash stock firmware with fastboot, but on windows rsd lite or the newer lsma work more reliably.
On windows mfastboot sometime works when standard fastboot.exe doesn't.
Linux may work better.
USB debugging doesn't effect fastboot mode, it's an adb function.
Edit:for locked bootloader
Booting stock .img may work for some devices
sd_shadow said:
USB debugging doesn't effect fastboot mode, it's an adb function.
Click to expand...
Click to collapse
Yes, but I was going to have him run
adb shell getprop | grep build.version.base
to figure out the software channel he needs. With the output I could find the exact build he is/was running on lolinet. That's hoping his bootloop is booting far enough for adb to enable though. adb shell wont work from stock recovery and adb shell from the quamp twrp we're using returns guamp device info. Wtf?
sd_shadow said:
On windows mfastboot sometime works when standard fastboot.exe doesn't.
Linux may work better.
Click to expand...
Click to collapse
On Linux fastboot seems to be flawless. I'm surprised to hear that it has trouble on Windows. But I think he's running fastboot from another android., which is so cool. Opens a door for root with no pc.
arkansawdave74 said:
I think there's still hope for you. I'm trying to figure out which stock firmware version your phone came with. If we can figure that out, I think you can flash and boot it even with a locked bootloader. What splash screen and boot animation does it have? Is it tracphone? I see a US Cellular version. When you boot to the bootloader what does the 1st white line say on the lower left? The BL line?
Also, I assume you got fastboot working phone to phone. I've tried 3 different adb/fastboot installations and can't get it to work (Magisk module, the one from termux pkg install android-tools, and one from github.). Can you tell me how you did it?
Click to expand...
Click to collapse
arkansawdave74 said:
I think there's still hope for you. I'm trying to figure out which stock firmware version your phone came with. If we can figure that out, I think you can flash and boot it even with a locked bootloader. What splash screen and boot animation does it have? Is it tracphone? I see a US Cellular version. When you boot to the bootloader what does the 1st white line say on the lower left? The BL line?
Also, I assume you got fastboot working phone to phone. I've tried 3 different adb/fastboot installations and can't get it to work (Magisk module, the one from termux pkg install android-tools, and one from github.). Can you tell me how you did it?
Click to expand...
Click to collapse
My Moto G power of 2021 is the one that I unlocked the boot loader with the code off of the Motorola site and then I tried to mess with Magis and it ended up boot looping so I tried to lock it again thinking that would help somehow and that’s where I’m at on that one. On the Moto G7 optimo I haven’t gotten anywhere with that one yet however I did get I haven't gotten anywhere with that one yet however I did get the Unlock data and put it on Motorola site and it said it can’t be unlocked. Also sorry but I’m new to this so I don’t understand about the splash screen and boot animation so please let me know what I need to do to give you that information.
Now with the phone to phone android to android, are used the Google app BUGJAEGER 3.0-full (164). Are used the command: fastboot oem unlock <unlock code> . And it unlocked right away.
arkansawdave74 said:
Well Damn....now I have one less way to insult Windows. Hey @sd_shadow , you would sure know...can you flash and boot the original firmware that came on your phone (same software channel) with a locked bootloader? Seems like you could but I've never tried it.
And @Bry2025 do you have USB Debugging enabled in Developer Options?
Click to expand...
Click to collapse
I just got a laptop and I’m going to attempt to use the command prompt and copy and paste to see if I can get the unlock code for my G7 optimo but on the Moto G power of 2021, I did have all of it unlocked but now since my dumbass locked the boot loader again I can’t get back on the initial platform and get developer tools. If I can get the OEM unlocking toggled back on I probably can unlock it reflash the firmware and boot my phone again
<EVERYONE>
Just to recap, my Motorola Moto G power 2021 is Bootloader locked after Magisk Installation failure. I have messed around with it and have it stuck in Fastboot Mode after it was stuck in bootloop. Some progress but the boot loader is locked again because of a error of mine and now it will not take my unlock code that I used before. Mind you, I did all of this between two android phones and an app called BUGAEGER That is available on Google play