Phone won't boot at all (Download Mode, Recovery, Main) - Android Q&A, Help & Troubleshooting

Phone is Samsung A10s SM-A107F Android 10, Baseband Version is A107FXXU7----.
Trying to boot it doesnt work
Charging doesnt diplay anything on screen
Connecting to computer always plays the connect then after a second disconnect, in a loop.
Download Mode doesnt work
Recovery mode doesnt work!
Please help as I dont have that much money to get a new one, I hope its not a brick, If it is I hope its fixable.

I have my phone opened if that would do anything

Maybe you can try to use edl (emergency download).
You need to connect 2 testpoints on your device after you opened it.
Search for something like "Samsung Galaxy A10 edl" or similar.

Related

[Q] Sprint Galaxy Nexus Bricked? Help Please

I recently upgraded my radio for my Sprint Galaxy Nexus (toroplus), but i was unable to connect to the internet. I could make calls and send/receive texts, but no network connection. I decided to try to go back to stock. I saw a post saying to use odin to revert to stock. I ran it but go an error while it was flashing the cdma radio. It got stuck and wouldn't do anything, so i took out the battery. Now i cant get into download/odin mode or fastboot. The only thing that i seem to be able to do is connect back to odin, but it wont finish the process. When turning on the phone i only get a screen that has a phone to the left a monitor on the right and a triangle with an exclamation.
Has anyone had this problem and does anyone know how to get out of it?
I appreciate any help i can get.
Sprint Samsung Galaxy Nexus
SPHL700KIT
That screen you see is download mode. If your phone boots at all it is not bricked what so ever and can be recovered. Instead of using odin I would recommend having a look at doing it manually via adb and fastboot, that way you know exactly where something may have gone wrong. If you reflash the whole stock cdma img it should boot fine. Have a look in the GNexus dev section for info about fastboot and adb if required.
Sent from my Galaxy Nexus
Thanks, But its not download mode
I used download mode before,so i'm pretty sure its not it, unless their are two versions of it. I have tried using adb/fastboot, but when i do "fastboot devices" it doesnt even see it anymore.
Thanks for your quick response.
What screen are you on when you run the command adb devices? Recovery /download?
Sent from my Galaxy Nexus
neither. I cant get to either of them. they no longer work. Ive tried and tried to get to download, fastboot,& recovery, but all i can get to is the stupid error screen. I think somewhere in the process i corrupted/deleted them.
also my pc detects the phone as "samsung mobile usb cdc composite device" and "samsung mobile usb modem #2"

Samsung Galaxy s2 sgh-t989 (tmobile) Soft bricked.

So I was helping my friend root his phone, and ran into a few unsuccessful trials. Tried to flash recoveries from 2-3 sources, it didnt work but atleast he was able to start his phone normally. Now it shows the screen which says firmware error, try recovery from Samsung Kies. Problem is Kies wont even detect the phone.
Will the instructions in this guide fix his issue?
http://forum.xda-developers.com/showthread.php?t=1414341
Yes I can still access the download mode. The part I can;t understand in this thread is : "Find a G2x USB and check if it puts in download mode while its off. If it doesn't" Once in the download mode screen, WHAT exactly indicate if it has been 'put in download mode' Is it the "Added" text in Odin?

[Q] AT&T Galaxy S4 i337 doesn't connect to PC

I tried flashing CWM recovery onto my AT&T Galaxy S4 and because my phone does not connect to my computer via USB for some reason (the phone charges and my computer recognizes that there's a device in, but I cannot actually do anything with it) I flashed it with Flashify. I rebooted into recovery mode, and I got slapped with the "Unauthorized software has been detected on your phone!" message. So I tried rebooting, and I got stuck in a recovery mode bootloop with the same message. Eventually, I realized if I just go into download mode and reboot by pressing the volume down key, it doesn't try to go into recovery mode. I have already endlessly researched my USB problem, and yes, I DO have USB debugging on. ODIN recognizes that I have an external device in as well, but I haven't tried flashing anything onto my phone with it because I don't want to brick my phone because the connection to my PC is faulty. I'm using the charger that came with the device as my USB drive, so that's not faulty either. I know rooting my phone did this, and I'm pretty sure it's because I missed a step. I used this tutorial to root my phone:
[droid views dot com] /root-att-galaxy-s4-sgh-i337-android-4-4-4-kitkat-firmware-i337ucufnj4/ (I'm not allowed to post links yet, so fix the URL if you're gonna have a look)
When I flashed the I337_NC1_Stock_Kernel, my phone refused to go into download mode and I couldn't flash the I337_NJ4_Stock_Kernel as a result. I'm pretty sure that's what caused it, but I have no idea how to fix it. I'm not an expert with my phone and, despite almost soft-bricking my phone via a corrupt CWM .zip, I'm not a newbie at this either. If I could figure out how to fix this problem, I wouldn't have to worry about throwing myself into a bootloop because I can just use ODIN. I was a sitting duck before download mode rescued me, so I'd like some help as to how I can accomplish this. Any and all help is appreciated. I am 100% certain my device is the right version for that tutorial, I wouldn't try to root my phone without checking all of the simple things first.

[Q] zte boost max n9520

I'm stuck in a boot loop it will go to the home screen for a few seconds time seems to vary and then it just reboots I have developer options I have everything checked and selected that should help me connect to the ADB bridge but nothing seems to work I have the unbrick tool and it just will not connect to my phone when I go into DFU mode its just a black screen with a red light it does not connect to my PC when I go into ftm mode same thing it will not connect and I cannot get into recovery this happened when I flashed the Phils custom recovery with flashify in the methods that everyone said to work from this form as soon as the recovery was installed the phone shut down and has rebooted ever since I'm freaking out its not my phone please someone tell me what to do
And my post gets pushed to the back really need an answer on it if someone could take another look at this I need to connect to my adb I have ran the unbrick tool and still no devices are found or connected I have tried dfu mode nothing ftm mode nothing I have tried connecting during the 30 seconds of homescreem time I get yet once again nothing I have developers options on with USB debugging checked
TrueHAVOC said:
And my post gets pushed to the back really need an answer on it if someone could take another look at this I need to connect to my adb I have ran the unbrick tool and still no devices are found or connected I have tried dfu mode nothing ftm mode nothing I have tried connecting during the 30 seconds of homescreem time I get yet once again nothing I have developers options on with USB debugging checked
Click to expand...
Click to collapse
search the unbrick tool for the boost max. id post the link but i dont have it. its works!

Bootloop on samsung SM-105FN. Unable to access recovery, download. no adb and fastboot devices detected

I had installed lineage os 19 unofficial on my samsung galaxy a10 and just "why not let lineage put their own shenanigans in the recovery" ... aaand phone is stuck in bootloop rebooting itself after failed attempts to boot system.
*The phone has bootloader unlocked.
I have tried to boot into recovery and download modes via buttons but to no avail. Phone attached to pc doesnt seem to "connect" to phone while cycling. When connected to power it powers itself and continues boot looping.
I have bought an usb jig (haven't inspected the resistor inside) to maybe force the download mode and reflash it with stock firmware. But the results were different. When connected to phone it turns itself off, nothing happens and i can't turn on the phone while the usb jig is inserted. (I guess usb jig really works only on "some" phones) I heard there is an emergency download mode on various phones (which on some devices is easier like ones with qualcomm cpu with edl cable and harder on other). Mine phone has exynos cpu and there also are hints over the internet there depending of the PCB and motherboard there might be some edl test points.
If there is a need i can disassemble it.
Are you referring to >this< thread?
Well yes, but actually no. Same lineage os file different tutorial.
Download and Install Lineage OS 19 for Samsung Galaxy A10 (Android 12)
In this tutorial, we will guide you to install the latest Lineage OS 19 on the Samsung Galaxy A10 (a10) smartphone. We have given the
www.getdroidtips.com
The only part i done was flashing the os and then reinstalling the ZIP with ticking the option to tinker with recovery. Now that i think about it i may have overreinstalled the os without clearing any cache or data.

Categories

Resources