[ROM][11.0][UNOFFICIAL] StagOS [Plate2] - Nokia 6.1 (2018) ROMs, Kernels, Recoveries, & Othe

[ROM][11.0][UNOFFICIAL] StagOS [Plate2] - Nokia 6.1 (2018) ROMs, Kernels, Recoveries, & Othe

Hello!
I'm back and today I'm happy that I can bring you a new version of StagOS for Nokia 6.1, which is based on Android 11. I have this ROM flashed on my phone and it works pretty fine, but please be aware that this is an unofficial custom rom and even if I try my best to bring you a stable rom, however some minor bugs may occur.
IMPORTANT NOTE: You are flashing this rom on your own responsibility! I'm not responsible for bricked devices... Please read the flashing instructions carefully.
Stag???
We are the StagOS, we aim at elegance, Material Design being at our core.
To start up Pure AOSP was the best option cause what's more better than android straight from Google.
Next we need those teensy weensy bits of customisations, like the clock could be to the right instead, what's the download speed... and such. So why leave these feelings empty.
With Stag we aim at giving a pure android experience fulfilling those small itches in the mind.
Don't forget, You need to grow your own Horns, Just kidding enjoy.
Sic Parvis Magna
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
What is working:
Phone calls & messaging
Wi-Fi & Wi-Fi Hotspot
Mobile data
VoLTE and VoWiFi (if your carrier supports it)
Adaptive brightness
Flash Light
Fast charging
Dark theme, night mode
Fingerprint sensor
Face unlock
NFC
FM Radio
Bluetooth
GPS
and more...
Known bugs:
Offline charging works but shows only blank screen
Miracast - Wi-Fi Display - can't connect
ROM installation instructions:
IMPORTANT: It is necessary to resize system and vendor partition on your phone before flashing this rom! This step will perform format of system and vendor partition and even userdata partition so make a backup if you don't want to lose your data!
Please download this nice and user friendly Nokia Repartition Tool brought to you by Raghu Varma and look at this instructional video:
Just use the first option "3.5G S - 1G V" - it is enough for this rom.
NOTE: After resize your phone will be automatically booted to TWRP, but because this tool is intended for Nokia 6.1 Plus, this TWRP will refuse to flash ROM zip on 6.1. In this case just reboot to bootloader and download this TWRP for our Nokia 6.1, boot it and everything will be fine. Now you can begin flashing.
After booting to TWRP:
1) If you just resized your system and vendor partitions using Nokia Repartition Tool then you have already formatted userdata so you can skip this step, otherwise if you want to do a clean flash then please Format Data by typing yes, then go to the Bootloader and reboot TWRP
2) Flash latest ROM zip via TWRP
3) Switch to alternative slot (if you are on slot a switch to b if you are on b switch to a)
4) Reboot system
Now you are done!
NOTES: Gapps are already included, so don't flash them! It is recommended to update your stock ROM to Android 10 before flashing this custom ROM.
SafetyNet on latest StagOS builds passes out of the box, so you won't need root/Magisk anymore. Flash Magisk only in case that you really need to root your device.
October 2021 note: Because probably there will be no more official builds of StagOS for Nokia 6.1, I will post here from time to time my builds again.
StagOS-PL2-11.0.R5.1-UNOFFICIAL-GApps-20211024-0810
- Latest build with October security patch
Sourceforge ROM Download Link
Release Information
ROM Source Code: https://github.com/StagOS
Kernel Source code: https://github.com/LineageOS/android_kernel_nokia_sdm660
Big thanks to LineageOS developers and maintainers for Nokia 6.1 device and vendor tree on which this build is based!
ROM OS Version: Android 11
ROM Kernel: Linux 4.x
ROM Firmware Required: Stock Android 10
Version Information
Current Version: 11.0.R5.1
Security patch level: 2021-10-01
Latest Build Release Date: 2021-10-24

Good work mate!

Is it stable enough for daily using?
If your rom is good, i will try it soon

Bảo Dora said:
Is it stable enough for daily using?
If your rom is good, i will try it soon
Click to expand...
Click to collapse
I'm using it every day without any problems. In my experience, all the important features are working. However, it needs some deeper testing, for example I haven't used a video call yet, so I will appreciate your feedback... ;-)

Now I figured out that StagOS has its official releases for our Nokia 6.1 maintained by vjspranav!
Just Download Here.
So I won't post any more builds on my part, because it would be useless.

I am using this rom for 1 month. It is nearly perfect. But, I have a problem with the camera. I always can't save the photo (via default app or other apps). If I restart my phone, it will work well.
I don't know how to solve it.

slow charging

Machi007 said:
Hello!
I'm back and today I'm happy that I can bring you a new version of StagOS for Nokia 6.1, which is based on Android 11. I have this ROM flashed on my phone and it works pretty fine, but please be aware that this is an unofficial custom rom and even if I try my best to bring you a stable rom, however some minor bugs may occur.
IMPORTANT NOTE: You are flashing this rom on your own responsibility! I'm not responsible for bricked devices... Please read the flashing instructions carefully.
Stag???
We are the StagOS, we aim at elegance, Material Design being at our core.
To start up Pure AOSP was the best option cause what's more better than android straight from Google.
Next we need those teensy weensy bits of customisations, like the clock could be to the right instead, what's the download speed... and such. So why leave these feelings empty.
With Stag we aim at giving a pure android experience fulfilling those small itches in the mind.
Don't forget, You need to grow your own Horns, Just kidding enjoy.
Sic Parvis Magna
View attachment 5278557View attachment 5278559View attachment 5278561View attachment 5278563View attachment 5278565View attachment 5278567
What is working:
Phone calls & messaging
Wi-Fi & Wi-Fi Hotspot
Mobile data
VoLTE and VoWiFi (if your carrier supports it)
Adaptive brightness
Flash Light
Fast charging
Dark theme, night mode
Fingerprint sensor
Face unlock
NFC
FM Radio
Bluetooth
GPS
and more...
Known bugs:
Offline charging works but shows only blank screen
Miracast - Wi-Fi Display - can't connect
ROM installation instructions:
IMPORTANT: It is necessary to resize system and vendor partition on your phone before flashing this rom! This step will perform format of system and vendor partition and even userdata partition so make a backup if you don't want to lose your data!
Please download this nice and user friendly Nokia Repartition Tool brought to you by Raghu Varma and look at this instructional video:
Just use the first option "3.5G S - 1G V" - it is enough for this rom.
NOTE: After resize your phone will be automatically booted to TWRP, but because this tool is intended for Nokia 6.1 Plus, this TWRP will refuse to flash ROM zip on 6.1. In this case just reboot to bootloader and download this TWRP for our Nokia 6.1, boot it and everything will be fine. Now you can begin flashing.
After booting to TWRP:
1) If you just resized your system and vendor partitions using Nokia Repartition Tool then you have already formatted userdata so you can skip this step, otherwise if you want to do a clean flash then please Format Data by typing yes, then go to the Bootloader and reboot TWRP
2) Flash latest ROM zip via TWRP
3) Switch to alternative slot (if you are on slot a switch to b if you are on b switch to a)
4) Reboot system
Now you are done!
NOTES: Gapps are already included, so don't flash them! It is recommended to update your stock ROM to Android 10 before flashing this custom ROM.
If you want ROOT just flash latest Magisk and if you want to use Google Pay with your credit/debit card, you need to do some additional steps to pass SafetyNet:
1) Flash latest Magisk package via TWRP
2) Open Magisk Manager App and turn on Magisk Hide in settings
3) In Magisk Manager go to Download and install these modules "Busybox for Android NDK" and "MagiskHide Props Config"
4) Read the instructions for correct setting up the module: https://github.com/Magisk-Modules-Repo/MagiskHidePropsConf/blob/master/README.md
5) I recommend to use custom fingerprint for our device by creating file named "printslist" in the ROOT of your internal storage with this line:
Code:
Nokia 6.1 (10):Nokia:6.1 (2018)=Nokia/Plate2_00WW/PL2_sprout:10/QKQ1.190828.002/00WW_4_15N:user/release-keys__2021-03-01
6) Run su command in terminal and then props command (or use adb shell) and set the custom fingerprint.
Reboot device and Enjoy!
Sourceforge ROM Download Link
StagOS-Plate2-11.0.R2.1-UNOFFICIAL-GApps-20210415-1212
- Bluetooth aptX audio codec fixed
- Connect your BT headphones and check Developer options - Bluetooth Audio Codec - you should see Qualcomm aptX audio here.
StagOS-Plate2-11.0.R2.1-UNOFFICIAL-GApps-20210413-1900
- My first public StagOS release based od Android 11 built using latest StagOS sources with 04/2021 Google security patch
NOTE: This project is now discontinued from my side because StagOS has now its official releases for our Nokia 6.1. Please read THIS POST.
Release Information
ROM Source Code: https://github.com/StagOS
Kernel Source code: https://github.com/LineageOS/android_kernel_nokia_sdm660
Big thanks to LineageOS developers and maintainers for Nokia 6.1 device and vendor tree on which this build is based!
ROM OS Version: Android 11
ROM Kernel: Linux 4.x
ROM Firmware Required: Stock Android 10
Version Information
Current Version: 11.0.R2.1
Security patch level: 2020-04-05
Latest Build Release Date: 2021-04-15
Click to expand...
Click to collapse
Bro bow you can continue developer sold his phone now stag os no new updates

Machi007 said:
Now I figured out that StagOS has its official releases for our Nokia 6.1 maintained by vjspranav!
Just Download Here.
So I won't post any more builds on my part, because it would be useless.
Click to expand...
Click to collapse
please developing new builds

Dipesh Patil said:
Bro bow you can continue developer sold his phone now stag os no new updates
Click to expand...
Click to collapse
Hi, where did you get this information? I recently asked at Telegram group and the dev said that a new version for Nokia 6.1 will be released.

Bro that time he said I help him to flash stock room back to Nokia 6.1 and lock bootloader and he tell me that he will sold his phone and no new updates 1 day ago bro

Dipesh Patil said:
Bro that time he said I help him to flash stock room back to Nokia 6.1 and lock bootloader and he tell me that he will sold his phone and no new updates 1 day ago bro
Click to expand...
Click to collapse
Okay, so in this case, I will post my builds here again.
Now you can enjoy StagOS-PL2-11.0.R5.1-UNOFFICIAL-GApps-20211024-0810

Machi007 said:
Okay, so in this case, I will post my builds here again.
Now you can enjoy StagOS-PL2-11.0.R5.1-UNOFFICIAL-GApps-20211024-0810
Click to expand...
Click to collapse
thanks alot...but why not u cant continue with official status?

gouthamram said:
thanks alot...but why not u cant continue with official status?
Click to expand...
Click to collapse
I prefer to build on my own PC and when I want to do. Unofficial build has all the features as official, there is no difference.

Yes
Machi007 said:
I prefer to build on my own PC and when I want to do. Unofficial build has all the features as official, there is no difference.
Click to expand...
Click to collapse
Bro thanka continue your work

iam now using stag os official vjspranav build...
i got a android 12 update notification from security update section

gouthamram said:
iam now using stag os official vjspranav build...
i got a android 12 update notification from security update section
View attachment 5440961
Click to expand...
Click to collapse
Don't do your device will it's Google update for pixel device

Related

[SFOS] [EXPERIMENTAL}SailfishOS 2.0.2.48 for Redmi 2

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The Alpha release was experimental and was not meant for the general public, but still recieved an overwhelming response. This new Beta version is free of most bugs encountered earlier and is suitable for everyone to get a taste of SailfishOS on their phone.
Read the installation instructions carefully.
Changelog from Alpha -->
* Bluetooth fixed.
* Audio now works out of the box.
* Camera Resolutions updated.
* Flash now works in Camera.
* Settings app now shows settings for cellular networks.
* FM-Radio now supported. ( Highly Experimental. Read the FM-Radio section below )
* Stand-by time vastly improved.
* Basic Jolla apps are now pre-installed. ( Before anyone talks about bloatware, you got the option to uninstall them)
* Warehouse, the community appstore is now pre installed.
Sailfish OS’s heritage lies in Nokia times, especially in the MeeGo operating system. Prior to 2011 Nokia and Intel had a vision of an open mobile operating system. Together they invested around 1 billion USD to the project and created an open source based operating system called MeeGo, which was used as a basis for several devices, such as the iconic Nokia N9. Although the Nokia N9 became the beacon of open source operating systems, Nokia decided to end the project and chose instead to continue with Microsoft’s Windows Phone OS. The rest of that is another story.
For more information about SailfishOS click here.
SailfishOS has now been successfully ported to Redmi 2 and here I am sharing the steps to install it on your phone.
Code:
Disclaimer: Your warranty is now void. You will lose all your data on your phone and may render it unusable. This software is provided as is without any warranty of any kind whatsoever. The user shall solely be reponsible for any consequence arising out of following this guide. I, or anyone else shall not be held responsible for bricked devices, dead sd-cards, thermonuclear war, you getting fired because the alarm app failed or any other consequence of following this guide. The linked zip contains some proprietary files.
tl;dr I wont be held responsible for any unfortunate incidence.
Prerequisites -->
1) Latest TWRP recovery installed (Others may work too but I haven't tested). You can get it here-->http://forum.xda-developers.com/redmi-2/development/recovery-recovery-built-source-inside-t3277621
*Note that the Cyanogenmod version is now changed.
2) cm-12.1-20160318-UNOFFICIAL-wt88047 zip by kumajaya. You can get it from his google drive link here--> http://forum.xda-developers.com/redmi-2/development/rom-cyanogenmod-unofficial-builds-t3200883
3) SailfishOS zip file. Download link given below.
This is not an Android ROM and thus the instructions to install are quiet different. Follow them carefully.
1) Boot to recovery. Wipe cache, dalvik-cache, system and data.
2) Copy the Downloaded files to the sdcard via USB.
3) Install cm-12.1-20160318-UNOFFICIAL-wt88047. Do NOT reboot after installing.
4) Install SailfishOS zip file. The installation will take around 10 minutes so don't think that its stuck. Ignore any errors about being unable to mount data partition.
5) Reboot System when installation succeeds.
Notes-->
1) This is not an Android ROM. Android apps will not work right now. But a way for Android apps to work is available but will take quiet some time before it gets on our device.
2) Root access (using devel-su in terminal) requires a password which can be set in Settings>Developer Options.
3) For advanced users, you can ssh into the device after setting a password in Developer options using ssh [email protected] over USB.
4) Do not register for a Jolla account. You will get an error about failed IMEI registration. This will be fixed as soon as Jolla allows ported devices to be registered.
5) The Store will not work. It needs a Jolla account. You can however use the openrepos warehouse for installing apps.
6) MTP over USB does not work.
7) Battery drains faster if screen is ON. Better than alpha but still needs improvement.
FM-Radio -->
You can play FM-Radio now but it is experimental.
Plug in your headphones and launch the PirateFM app for radio.
if it won't start, open terminal and use "harbour-piratefm" to start it.
Once the app starts, it should show a frequency. If its stuck at 0.0 MHz, then close the app(close, not minimise) and restart it again.It should show a frequency now. If you have echoing audio in the headphones, i.e. you hear your own voice in the headphones, then open terminal and " systemctl restart --user pulseaudio" and then try running the app again.
FM will not work through the speakers, and it also cannot be muted.
Download Link -->
The file has been named as alpha-2 because that is how it was initially intended but it would be better to designate this as beta since its almost stable.
https://www.androidfilehost.com/?fid=24591020540823211
DO NOT SHARE MY WORK WITHOUT MY EXPLICIT PERMISSION. IF YOU ARE SHARING, LINK TO THIS POST.
XDA:DevDB Information
SailfishOS 2.0.2.48, ROM for the Xiaomi Redmi 2
Contributors
adeen-s, @mal- @sledges @kimmoli @Stskeeps @spiiroin @Litew @jusa_ @ketut.kumajaya
Source Code: https://github.com/adeen-s/droid-config-wt88047 ; https://github.com/adeen-s/droid-hal-version-wt88047 ; https://github.com/adeen-s/hybris-boot/ ; https://github.com/adeen-s/droid-hal-wt88047 ; https://github.com/adeen-s/android_kernel_cyanogen_msm8916 ;
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Must not have flashed lollipop MIUI update.
Based On: SailfishOS
Version Information
Status: Testing
Current Beta Version: 1
Beta Release Date: 2016-06-30
Created 2016-06-30
Last Updated 2016-09-17

Reserved
For Android app compatibility, I need help from someone with significant experience in compiling cyanogenmod. PM me.

Reserved
Warning : This procedure will wipe all data on your device.
MultiROM thread--> http://forum.xda-developers.com/redmi-2/development/mod-multirom-v33-t3381373
MultiROM Instructions -->
1) Get the modified twrp and multirom zip from the multirom thread.
2) Reboot to recovery, select Install, select install image, choose the modified twrp and flash it to recovery partition.
3) Reboot recovery. It should now boot up to the modified TWRP.
4) Wipe Data,System,Cache and Dalvik-Cache.
5) Select Install from Recovery main menu. Select cm-12.1-20160318 zip. uncheck all options and install it.
6) Again Select Install from Recovery main menu. Select SailfishOS zip file and uncheck all options and install it.
7) Select MultiROM settings ( small button on top right corner in main menu of recovery). Select inject current boot sector. Reboot or install secondary ROM of your choice now.
8) For adding Secondary ROMs of your choice, refer to the MultiROM thread.

I tried the first, alpha build, it was really really good, but can you please tell me how to install it as a secondary ROM havin it's own kernel via multiboot, as I was really tires of switching kernels everytime I had to switch between CM13 and SailFish.
I hope it's possible.
.
Also, will it not work with the latest, Lolipop Bootloader? (As i can make out from the "Required Firmware" section from OP)

shanx_verma said:
I tried the first, alpha build, it was really really good, but can you please tell me how to install it as a secondary ROM havin it's own kernel via multiboot, as I was really tires of switching kernels everytime I had to switch between CM13 and SailFish.
I hope it's possible.
.
Also, will it not work with the latest, Lolipop Bootloader? (As i can make out from the "Required Firmware" section from OP)
Click to expand...
Click to collapse
Since the base cyanogenmod will not work with the lollipop bootloader, it cannot be done. Sailfish will work if a way to run the base cm over the lollipop bootloader is found.
As for the multiboot, I haven't tried it yet but take a look at this http://forum.xda-developers.com/showpost.php?p=67519570&postcount=62 although it was already addressed to you.

@adeen-s well as per the updated devolvement for wt88047, CM now supports Lollipop bootloader. Can you please guide us through the process of having SFOS as secondary? Is it like installing any other secondaries?

@adeen-s can you change base sfos to cm13
Sent from my 2014817 using Tapatalk

NeoDarkness said:
@adeen-s can you change base sfos to cm13
AFAIK Sailfish OS 2.0 Can only run over CM 10.x 11.x 12.1.
Source- Sailfish OS Hardware Adaptation Development Kit
Click to expand...
Click to collapse

iamsubhranil said:
@adeen-s well as per the updated devolvement for wt88047, CM now supports Lollipop bootloader. Can you please guide us through the process of having SFOS as secondary? Is it like installing any other secondaries?
Click to expand...
Click to collapse
CM-12.1 still does not.

SF.OS doesn't work with LP BootLoader. Thanks for the Info.
adeen-s said:
CM-12.1 still does not.
Click to expand...
Click to collapse
Oh, and there I was, wondering why my SFOS wasn't booting on LP Bootloader.

wow sailfish os enters beta
What are remaining issue items? battery drain fixed?

Bugs
Hi, i love this os and hope android apps support is coming soon.
the bugs that i found is the music player seem to show the same mp3 file as 2 different file but one with correct duration and the other one is zero.
for problems, the battery draining quite fast :crying:
thank you for your hard work dev!!!

@adeen-s that means if i flash the rom as secondary having k loader, it'll work?

@adeen-s What a beautiful typographical OS with fluent transitions. Been using it with MultiROM keeping my previous primary RR 5.7.1 as secondary. Everything is pretty good on my side. Just animations are quite unfluent sometimes. And some USSD codes aren't showing when dialed. Like *143*0# and *400# on Aircel(404 91).

Using it, wow!
iamsubhranil said:
@adeen-s What a beautiful typographical OS with fluent transitions. Been using it with MultiROM keeping my previous primary RR 5.7.1 as secondary. Everything is pretty good on my side. Just animations are quite unfluent sometimes. And some USSD codes aren't showing when dialed. Like *143*0# and *400# on Aircel(404 91).
Click to expand...
Click to collapse
How did you return to the KK bootloader, buddy?

iamsubhranil said:
@adeen-s that means if i flash the rom as secondary having k loader, it'll work?
Click to expand...
Click to collapse
Not sure. I tried it once and it didn't work. It may need a workaround to work as secondary.

shanx_verma said:
How did you return to the KK bootloader, buddy?
Click to expand...
Click to collapse
I had backed it up using twrp. Just restored Firmware. U flash any miui kk fastboot
---------- Post added at 04:32 PM ---------- Previous post was at 04:31 PM ----------
adeen-s said:
Not sure. I tried it once and it didn't work. It may need a workaround to work as secondary.
Click to expand...
Click to collapse
Yup MR showed some errors about not founding fstab

Here's some screenshots
Hey guys. It's wonderful!

iamsubhranil said:
Hey guys. It's wonderful!
Click to expand...
Click to collapse
Thanks for the screenshots. I'm glad to know you liked it.

iamsubhranil said:
I had backed it up using twrp. Just restored Firmware. U flash any miui kk fastboot
Yup MR showed some errors about not founding fstab
Click to expand...
Click to collapse
Okay, I have the firmware partition backed up. What all will it restore - will it restore the KK modem as well? (cuz I don't want KK modem, just the bootloader).

[ROM] LineageOS 18.1 UNOFFICIAL - 1.0 [2021-01-17]

LineageOS 18.1 for Sony Xperia XZ1
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
RELEASE
This is an alternative ROM for the Sony Xperia XZ1, offering several privacy features.
Please report any issues you observe apart from the ones listed below. Logs are needed for me to fix anything (preferably dmesg and logcat). I can't test NFC very thoroughly, to please report your findings.
FEATURES
Signed with dev keys
Up-to-date kernel
WireGuard kernel support
DOWNLOAD
You can download the latest releases here:
poplar (G8341):
twrp-3.5.0-0-20210117-poplar
lineage-18.1-20210117-UNOFFICIAL-1.0-poplar
poplar_dsds (G8342):
twrp-3.5.0-0-20210117-poplar_dsds
lineage-18.1-20210117-UNOFFICIAL-1.0-poplar_dsds
poplar_canada (G8343):
twrp-3.5.0-0-20210117-poplar_canada
lineage-18.1-20210117-UNOFFICIAL-1.0-poplar_canada
Check the ChangeLog below for firmware requirements!
INSTALLATION
Put the zip file of the ROM on your sdcard or internal storage, boot into recovery and flash. When coming from stock: boot into TWRP, format data, reboot to recovery and wipe all internal partitions. Then flash the ROM, GApps (if needed) and root (if needed).
Note: There is not going to be a LOS su addon anymore. If you need root, flash a root manager of your choice. No guaranteed support from LOS for this.
When updating from builds, simply dirty flash the ROM.
If coming from 17.1, please see advice below in second post ("UPGRADE LINEAGEOS").
KNOWN ISSUES
WFD is not working yet (waiting for new non-BSP blobs)
Stock camera is not working anymore due to incompatibility of stock library (libimageprocessorjni.so) with new libgui
You tell me...
Contributors
derf elot, modpunk, Rooted_Ansh
Thanks to the testers
coin3x, feduss, GiaSen, Gizanagi, hsheemi, kaancaliskan, sohrab1985
Source Code
poplar: https://github.com/whatawurst/android_device_sony_poplar
poplar_dsds: https://github.com/whatawurst/android_device_sony_poplar_dsds
poplar_canada: https://github.com/whatawurst/android_device_sony_poplar_canada
kernel: https://github.com/whatawurst/android_kernel_sony_msm8998
Rom Information
ROM OS Version: Android 11
ROM Kernel: Linux 4.4
Version Information
Status: Stable
Current Stable Version: 1.0
Stable Release Date: 2021-01-17
Thread Information
Created 2021-01-17
Last Updated 2021-01-17

SECURITY ADVICE
Don't flash ROMs or Magisk modules which set SELinux to permissive or you welcome malware on your device!
UPGRADE LINEAGEOS
I have not tried upgrading the device from 17.1 and cannot guarantee that it will work - you should do a backup just in case. If things go wrong, flash it as if coming from stock (see instructions in OP).
The following steps should work though:
Flash new twrp and boot into it
Flash new rom, opengapps and any updated root solution you use
Optional: Clear cache
Reboot
Note: When updating form Lineage 17.1, you maybe have to once change your preferred network type from 3g back to 4g/LTE.
UPGRADE FIRMWARE
Grab the Sony Stock firmware using e.g. XPeriFrim. You should always flash the firmware matching the LOS build.
Grab newflasher and put it in the same folder as the firmware files.
Read the newflasher original post on XDA for general instructions!
Remove the following from the folder so they won't get flashed:
all *.ta files (keep the one in the boot/ directory)
cache*.sin
fotakernel*.sin
kernel*.sin
system*.sin
userdata*.sin
vendor*.sin
Turn off your phone
Hold the volume down button and attach it via USB to your system till you see LED turning green
Run newflasher from within this directory to flash the remaining files
You can say yes to the first optional step, in case you don't have working drivers installed.
Skip the second optional step (dumping of trim area), it's useless if your bootloader is unlocked already and takes a long time.
How to get root?
As mentioned before, there will not be an official su addon from LOS anymore. If you need root, flash an unofficial solution.
Google Apps
You can download and install the Google Apps from opengapps.org. You need ARM64 and 11.x. I suggest to *always* use the pico or nano package. If you need additional apps you find them in the Play Store.
Open GApps for Android 11 is still in beta. You can download those releases here
MicroG
This ROM doesn't support Signature Spoofing. However we are watching MicroG and check if they provide newer builds e.g. for Android 11.

REQUIRED FIRMWARE: 47.2.A.11.228
CHANGELOG
2021-01-17 | 1.0| 47.2.A.11.228
Initial release

Thanks @derf elot ! For all your and the rest of the Dev team's efforts.
What can we (the community) do to help get the camera back up and running?

Ok THIS WAS THE BEST BIRTHDAY PRESENT EVER... I'll test it asap

ZombieLinux said:
Thanks @derf elot ! For all your and the rest of the Dev team's efforts.
What can we (the community) do to help get the camera back up and running?
Click to expand...
Click to collapse
Unfortunately, I am not sure there is much that we can do. The stock library that we need for the stock camera app to work properly (libimageprocessorjni.so) is not liking the new Android 11 libgui. We (also with the help of @j4nn ) tried to fix these issues in various ways, including shimming and forcing the use of the 10 libgui but haven't managed to get it working properly yet. Maybe we'll have a crack at it again at some point, but I wouldnt get my hopes up too much. It also doesn't help that the XZ2/3 series is not getting an official Android 11 update. Opencamera is a decent alternative, although it does lack some of the stock camera options.
JimKatsanos said:
Ok THIS WAS THE BEST BIRTHDAY PRESENT EVER... I'll test it asap
Click to expand...
Click to collapse
Happy birthday. I hope you enjoy

Oh nice, and I just got the device today (new and unopened) but for some reason I can't flash it to a different or use even the official tool from Xperia to "repair" my software.
First thing I'll do after upgrading will be checking this rom.
Thank you a lot!

Hello, nice job.
Smooth fresh install rom+Nikgapps, everyhing works nice,
but time to time phone call was inposible - calling stops in a 0 seconds.But i still was able receive phone calls. After receiving call - i can make a call for few times.Sorry can't provide any logs - use this phone as my main daily device, so quickly return to my previous rom (resurrection remix 8.6.4), where everything running well.

dzenius said:
Hello, nice job.
Smooth fresh install rom+Nikgapps, everyhing works nice,
but time to time phone call was inposible - calling stops in a 0 seconds.But i still was able receive phone calls. After receiving call - i can make a call for few times.Sorry can't provide any logs - use this phone as my main daily device, so quickly return to my previous rom (resurrection remix 8.6.4), where everything running well.
Click to expand...
Click to collapse
It's just working fine here with opengapps beta. Mostly likely nikgapps broke dialer app.

kaancaliskan said:
It's just working fine here with opengapps beta. Mostly likely nikgapps broke dialer app.
Click to expand...
Click to collapse
Can You tell me, where can i get opengapps for android 11?

dzenius said:
Can You tell me, where can i get opengapps for android 11?
Click to expand...
Click to collapse
Please read the OP's. There is a link in the 2nd post.

derf elot said:
Please read the OP's. There is a link in the 2nd post.
Click to expand...
Click to collapse
Thanks.Will download, flash and report on weekend.

dzenius said:
Hello, nice job.
Smooth fresh install rom+Nikgapps, everyhing works nice,
but time to time phone call was inposible - calling stops in a 0 seconds.But i still was able receive phone calls. After receiving call - i can make a call for few times.Sorry can't provide any logs - use this phone as my main daily device, so quickly return to my previous rom (resurrection remix 8.6.4), where everything running well.
Click to expand...
Click to collapse
I also tried Nikgaaps (full version from 12/30/2020) and I don't have this issue. Maybe you used a different version or build.

NOICE

Rom really smooth & gaming as same or maybe better than stock.
Thank You for the great work.

everything works fine, nfs too

The carrier profile can use the files from XZ3(oem.sin).XZ1 stop updating very early,XZ3 is constantly being updated.
The carrier which are China Unicom and China Telecom used is from XZ3(oem.sin).
This file is modified according to XZ3.(by iovf and 沙河新基金啊)

LYSZY6 said:
The carrier profile can use the files from XZ3(oem.sin).XZ1 stop updating very early,XZ3 is constantly being updated.
The carrier which are China Unicom and China Telecom used is from XZ3(oem.sin).
This file is modified according to XZ3.(by iovf and 沙河新基金啊)
Click to expand...
Click to collapse
I have added support for both of these internally, so a custom OEM should not be needed anymore. I know at least of one person where it's working on maple. is it not working for you?

derf elot said:
I have added support for both of these internally, so a custom OEM should not be needed anymore. I know at least of one person where it's working on maple. is it not working for you?
Click to expand...
Click to collapse
I'm sorry. I just found this option in Settings. It seems to work.
Thank you again for your reply.
By the way，are there any plans to add volte video calling?（This is not a requirement.）

Gesture Navigation (1st option) seems buggy sometimes especially while playing game bottom bar appears in center & (in landscape) bottom screen touch not response.

Development [ROM][DISCONTINUED][11][Mojito][Sunny] Project Sakura [OFFICIAL][AOSP]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Project Sakura is a custom ROM based on Lineage OS, It tries to remain true to it while also providing some more functionality and UI changes. Its sole purpose is to provide a platform that is powered by Lineage and is more customisable than Lineage.

Code:
* Your warranty is now void.
* We are not responsible for anything that may happen to your phone by installing any custom ROMs and/or kernels.
* You do it at your own risk and take the responsibility upon yourself and you are not to blame us or XDA and its respected developers.
"This is a user-friendly thread, all your suggestions are important to us and will be taken into consideration."
CLEAN/FIRST TIME FLASH :
- Download the Build (GApps Included)
- Reboot to recovery (Almost any recovery would work)
- Take backup (optional)
- Flash your firmware(If required)
- Factory Reset
- Reboot To Recovery
- Flash the ROM (Using TWRP/OFox recommended)
- Reboot to Recovery (Lineage OS Recovery should appear)
- Reboot to system
- Enjoy
UPDATE/DIRTY FLASH :
- Download the Build [to PC/SDCARD if using Lineage OS Recovery]
- Take backup (optional)
- Reboot to recovery
- Flash your firmware(If required)
- Flash the ROM.zip [ADB Sideload if using Lineage OS Recovery]
- Reboot to system
- In case this results in bootloops, clean flash again (that's why I asked to take a backup prior to updating)
- Enjoy
OVER-THE-AIR (OTA) UPDATE :
Make sure you're using Lineage OS Recovery, it may not work with other recoveries. If even after following proper steps here, it says "Update Failed" or something, report to me [READ MORE]. Check if OTA is mentioned as a bug in the post below.
- Take backup (optional)
- Go to Settings > Sakura Configs > Sakura Updates > System Updates
- You can check for updates by clicking the update icon on the top-right
- If there are no updates found, check you are asked to clean flash in our Official Project Sakura Updates Channel, if yes, follow the first guide to clean flash, if not, after making sure that you have a proper internet connection, try rebooting the system. If still says not found, follow the Update guide on top.
- After the updater finds the update, click on Download, and hold the update if you want to switch mirrors.
- Let the update download and once it is done, it should inform you thru notification
- Once it is done, click on install and it should start installing, this does take longer than flashing it manually, but here we can go back and continue doing what you want to do, while it is updating. Maybe go continue the movie you were watching.
- Once that is done, select Reboot and... Tada, you're in the latest version of Project Sakura.
- In case this results in bootloops, clean flash again (that's why I asked to take a backup prior to updating)
NOTE: While ADB Sideloading, if the installation process reports the message (~47%) adb: failed to read the command: No error, do not worry, the process was completed successfully and you can restart the device. )
Download
-Lineage OS
-AOSP
-Superior OS
-AOSiP
-DerpFest
-Pixel Experience
-Extended UI
-Havoc OS
-CrDroid ROM
Buy the founder of Project Sakura a coffee
(it's going directly to him and not to me)
ko-fi link
Project Sakura Source
Project Sakura Device Related Trees
Telegram Support Group
Device-Specific Telegram Support Group
REPORTING BUGS!
As soon as the problem occurs, take a logcat
Read this for more
Project Sakura, ROM for codename
Device: mojito / sunny
Maintainer: Ashwin DS
Build Type: Official
Contributors
Zidan44
@wholetthedogout (ANX Camera)
Kernel Source: https://github.com/PixelExperience-Devices/kernel_xiaomi_mojito/
ROM OS Version: 11.0
ROM Kernel: Linux 4.14.x
ROM Firmware Required: Must be on Latest Firmware
Based On: LineageOS 18.1
Changelogs: Click Me
Bugs: Click Me
Version Information
Status: Stable
Current Stable Version: 5.2
SELinux Status: Enforced
Initial Release Date: 24/08/2021

Changelogs here:
Find Changelogs on our OTA repo and in the downloads page too
====== 12 October 2021 ======
- Added stock HVDCP props
- Fixed camera video recoding issue
- Fixed screen recoding lags
- Removed ANX camera
- Added Snap Camera
- Include Neternels Kernel
- Enabled Smart Charging
====== 26 September 2021 ======
- Fixed libperfmgr nodes crash
- Added power stats moke service hals
- Fixed FPS Meter
- Smarter decisions on whether to use 2/5Ghz AP
- Disabled wifi firmware logging
- Disabled NUD failure occurs logging
- Added stock permission for hwcomposer service
- Fixed ueventd permissions crash
- Switched to multihal sensor service hal to 2.1
- Enabled Wi-Fi hals power saving
- Switched to Codec2 by default
- Enabled Codec2 input surface
- Enabled dalvik dex2oat64
- Fixed props crashes in logs
- Added minimal xiaomi parts
- Fixed SDM and ultrasound_extn crashes
- Fixed whatsapp mic delay or crashes
- Improved overall system performance
- Mic issue is fixed other variant
====== 22 September 2021 ======
- Update blobs from V12.5.3.0.RKGMIXM
- Added main display cutout overlays
- Fixed dimens values for display cutout
- Updated brightness overlay configs
- Added camera cutout ring like MIUI
- Removed virtual framebuffer cmdline
- Labeled some more wakeup nodes
- Mic issue is fixed for some people
====== 20 September 2021 ======
- [OTA] Now use "Seamless Updates" to update to the latest version with just a restart
====== 16 September 2021 ======
- Fixed touch issue
- Decommonized display color modes
- Drop soundtrigger hal
- Update blobs from CAF
- import Xiaomi mlipay service blobs
- Added Alipay and WeChat fingerprint payment support
- More misc changes
====== 15 September 2021 ======
- Sync latest source changes
- Fix SafetyNet failing
====== 03 September 2021 ======
- Sync latest source changes
====== 24 August 2021 ======
- Initial official build

Existing Device Side Bugs (On build released on 12/10/2021)
[Updated on 13th October 2021]
- You tell me
If you think the bug is source side and NOT device side, skip the rest of the post and read the official Project Sakura Wiki and also report in Project Sakura Official Telegram Chat
How to [properly] report bugs?
What do I do when I encounter a bug?
Support Group
Check if you are getting the issue, every time you do something, or if it is a one time issue
Report it on our Telegram Group with all the information you think is important and look if its a known issue or is there a fix already
Get to know if others are reporting it too, refer to XDA and/or Telegram Group
If you are rooted/using a custom kernel, try unrooting and switching between kernels or switch back to the stock kernel. If using a different kernel fixed your issue, report it to me in my Telegram Group or leave a reply here.
If the issue persists, take a back up then format data via recovery [clean flash]
If the issue still persists, take logs when the issue occurs [Click me for guide] and report with all the information you think is important (like, did you face this in the previous version, is this a bug in many other ROMs too, what have you tried till now, how do I replicate your issue on my device)
If you have not faced the issue in the previous build, then feel free to go back to that if you want to.
If you report saying "Youtube crash" without properly following the procedure above, your bug report shall be ignored, instead say "Youtube app crashes on my phone when I am trying to watch a video at 4k 60fps, I have dirty flashed this build from the exactly previous build thru OTA here are logs for the same" and give proper logs, you might as well get your bug fixed, it's not too hard to report bugs properly.

Reserved #3

so many roms that now is hard to pick one... i'm back to MIUI 12.5 wich fixed all issues for me ... bye bye

alonsoj636 said:
so many roms that now is hard to pick one... i'm back to MIUI 12.5 wich fixed all issues for me ... bye bye
Click to expand...
Click to collapse
Believe me, You will return to AOSP Then just back to MIUI then you will return to AOSP ... and so on.
just enjoy flashing

Abdullah.Csit said:
Believe me, You will return to AOSP Then just back to MIUI then you will return to AOSP ... and so on.
just enjoy flashing
Click to expand...
Click to collapse
it's true Miui is really unbearable for me, I only installed it because I needed the Screen Cast function
Now i'm back on Superior OS ... beautiful ROM

Abdullah.Csit said:
Believe me, You will return to AOSP Then just back to MIUI then you will return to AOSP ... and so on.
just enjoy flashing
Click to expand...
Click to collapse
I have stuck with crdroid for a long time. I don't think I will be jumping to any other ROM anytime soon. MIUI, that is a hell no for me. Its too clunky and laggy, and you can tell as soon as you install it.

What latest firmware means required? My problem is I don't know how to get back on stock 12.0.5 . When I'm flashing on mi tool it say "metadata is not allowed on snaphotted state" and now I'm stuck at ancient rom which have anx camera

akoaypinoy said:
What latest firmware means required? My problem is I don't know how to get back on stock 12.0.5 . When I'm flashing on mi tool it say "metadata is not allowed on snaphotted state" and now I'm stuck at ancient rom which have anx camera
Click to expand...
Click to collapse
Somebody help me ..please

akoaypinoy said:
Somebody help me ..please
Click to expand...
Click to collapse
check this solution (post #65):
[ROM][11.0][OFFICIAL] crDroid Android v7.x (mojito/sunny)
*** Disclaimer I am not responsible for any damage you made to your device You have been warned crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features...
forum.xda-developers.com

UniNick said:
check this solution (post #65):
[ROM][11.0][OFFICIAL] crDroid Android v7.x (mojito/sunny)
*** Disclaimer I am not responsible for any damage you made to your device You have been warned crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features...
forum.xda-developers.com
Click to expand...
Click to collapse
Sir thank you for reply but when I click fastboot.exe it will not show any cmd . I don't know why. I've installed sdk platform tools but nothing's happen

You need to give fastboot commands from within windows command prompt or terminal...
How to Use ADB and Fastboot on Android (and Why You Should)
You need to master ADB and Fastboot to root your Android phone, uninstall bloatware, and perform many more advanced mods.
www.makeuseof.com

UniNick said:
You need to give fastboot commands from within windows command prompt or terminal...
How to Use ADB and Fastboot on Android (and Why You Should)
You need to master ADB and Fastboot to root your Android phone, uninstall bloatware, and perform many more advanced mods.
www.makeuseof.com
Click to expand...
Click to collapse
Sir can I ask you again. If my decision stay on custom Rom with android 11 . When it comes that have a custom Rom android 12 can I directly install that Rom without install stock Rom then install custom rom. I mean some basis that need first install stock Rom that have android 12 before install custom rom that android 12. U get it sir? Sorry for my English I'm Filipino here

akoaypinoy said:
Sir can I ask you again. If my decision stay on custom Rom with android 11 . When it comes that have a custom Rom android 12 can I directly install that Rom without install stock Rom then install custom rom. I mean some basis that need first install stock Rom that have android 12 before install custom rom that android 12. U get it sir? Sorry for my English I'm Filipino here
Click to expand...
Click to collapse
depends on the custom Rom... in any case you should backup your apps in case a clean flash (deleting all data) is required.

UniNick said:
depends on the custom Rom... in any case you should backup your apps in case a clean flash (deleting all data) is required.
Click to expand...
Click to collapse
Thank you sir for time that you reply me.. thank you so much. I don't know if I'm stay at custom rom I'm afraid of bugs. My phone is Redmi note 10.

alonsoj636 said:
so many roms that now is hard to pick one... i'm back to MIUI 12.5 wich fixed all issues for me ... bye bye
Click to expand...
Click to collapse
why

akoaypinoy said:
What latest firmware means required? My problem is I don't know how to get back on stock 12.0.5 . When I'm flashing on mi tool it say "metadata is not allowed on snaphotted state" and now I'm stuck at ancient rom which have anx camera
Click to expand...
Click to collapse
so i have to get on miui before installing this rom?

ClarityG said:
so i have to get on miui before installing this rom?
Click to expand...
Click to collapse
That was an concept of tutorial

can someone give detailed procedure for installation, idk what "-Flash your firmware(If required)" this means

[ROM][UNOFFICIAL][matisse][millet] CypherOS 11

New Updates for CypherOS are online.
Changelog
-Security Patch October '21
-Synced with LOS-Source
-A lot of work under the Hood from @matteo0026

Wonderful rom sir. My first issue is that Im not able to sign into playstore when or get past "Getting tablet ready" it always says "Couldnt connect" Not sure if its the rom or the gapps but im using opengapps. Anyway, thank you so much for the hard work that you have done with this rom. Extremely impressed. Thank you so much and looking forward to see more of your work.

Dvalin21 said:
Wonderful rom sir. My first issue is that Im not able to sign into playstore when or get past "Getting tablet ready" it always says "Couldnt connect" Not sure if its the rom or the gapps but im using opengapps. Anyway, thank you so much for the hard work that you have done with this rom. Extremely impressed. Thank you so much and looking forward to see more of your work.
Click to expand...
Click to collapse
Are you sure Wifi is connected?
If yes, try a different package of Gapps or try to restore a older backup (/data only) from a different ROM, if you have. Also be aware, that our tablets cannot connect to Routers with WPA3.
This will be fixed in one of the next builds.

crazydrive22 said:
Are you sure Wifi is connected?
If yes, try a different package of Gapps or try to restore a older backup (/data only) from a different ROM, if you have. Also be aware, that our tablets cannot connect to Routers with WPA3.
This will be fixed in one of the next builds.
Click to expand...
Click to collapse
I tested mindthegapps from this link https://www.cyanogenmods.org/downloads/mindthegapps-11-0-download/ its letting me setup, so it just opengapps that is the issue. Will share more later

Dvalin21 said:
I tested mindthegapps from this link https://www.cyanogenmods.org/downloads/mindthegapps-11-0-download/ its letting me setup, so it just opengapps that is the issue. Will share more later
Click to expand...
Click to collapse
Aye. Sometimes the Setup Wizard is causing troubles.

logcat and kernel logs. Also, the button for the camera is so low on the screen its cut off. I tried to make a phone call earlier, but it would just end the call immediately. Im able to get on the internet with 4G though

Dvalin21 said:
logcat and kernel logs. Also, the button for the camera is so low on the screen its cut off. I tried to make a phone call earlier, but it would just end the call immediately. Im able to get on the internet with 4G though
Click to expand...
Click to collapse
Hi. I´ve tested the Issues you mentioned.
The Camera App seems to be broken or has a wrong resolution. That´s nothing i can fix but i´ll report it to the devs. As a workaround install Open Camera. This App is working normal.
I tested phonecalls (in and out) with 4G and Edge. Both are working for me.
Maybe there´s an issue with your local provider. If the problem persists, i would suggest to dl ROM and Gapps again (maybe a file is corrupted), delete your ROM in TWRP + format /data and do a clean install of both, ROM and Gapps. Often this will fix those errors.
Your logcat is looking not too bad except a crash of firebase, what definetly could cause the trouble. But we´ll see it, if you´ve done a clean and fresh installation.

Hi, I got the SM-T531 tablet and I'm going to download this ROM and see how it behaves I will do all the possible tests I can do, to contribute. There's no way the 3g works right, just connections right?

Utherbone said:
Hi, I got the SM-T531 tablet and I'm going to download this ROM and see how it behaves I will do all the possible tests I can do, to contribute. There's no way the 3g works right, just connections right?
Click to expand...
Click to collapse
Yes, unfortunately 3g isn't working at any ROM from 9 to 11.
Matteo is working on it but with no success so far.

New Files are up!
-synced with LOS-Source
-Security Patch November 2021
-all Devices are now able to use WPA3

Hi @crazydrive22 . I'll take the opportunity and ask you a question of mine. I'm having trouble flashing any SM-T531 compatible roms. I will list the steps I followed.
1 - Flasing twrp with heimdall. At first I tried here: https://twrp.me/samsung/samsunggalaxytab4101.html but ta off the link there.
I downloaded it here on the XDA forum: https://forum.xda-developers.com/t/recovery-3-5-2_9-unified-matisse-millet-twrp-recovery.4019831/ ;
2 - full wipe and format;
3 - Flashing this rom (with or without gapps) Resulting: Loop in Samsung logo or should I wait too long?
Thanks for working.

Utherbone said:
Hi @crazydrive22 . I'll take the opportunity and ask you a question of mine. I'm having trouble flashing any SM-T531 compatible roms. I will list the steps I followed.
1 - Flasing twrp with heimdall. At first I tried here: https://twrp.me/samsung/samsunggalaxytab4101.html but ta off the link there.
I downloaded it here on the XDA forum: https://forum.xda-developers.com/t/recovery-3-5-2_9-unified-matisse-millet-twrp-recovery.4019831/ ;
2 - full wipe and format;
3 - Flashing this rom (with or without gapps) Resulting: Loop in Samsung logo or should I wait too long?
Thanks for working.
Click to expand...
Click to collapse
Hi.
First boot can take a lot of time. If it's not booting i would suggest to flash Stock 5.0.2 and start again from scratch. It's nescessary to had 5.0.2 installed once to make sure, that the Bootloader is updated. The Bootloader from KitKat (4.x) is not working with LineageOS 9 or newer and it's forks like crDroid or Cypher. The TWRP from Matteo is good, it's the lastest one and working well. But i can't tell you anything about Heimdall. I'm using Odin only to flash Stock or TWRP.

crazydrive22 said:
Hi.
First boot can take a lot of time. If it's not booting i would suggest to flash Stock 5.0.2 and start again from scratch. It's nescessary to had 5.0.2 installed once to make sure, that the Bootloader is updated. The Bootloader from KitKat (4.x) is not working with LineageOS 9 or newer and it's forks like crDroid or Cypher. The TWRP from Matteo is good, it's the lastest one and working well. But i can't tell you anything about Heimdall. I'm using Odin only to flash Stock or TWRP.
Click to expand...
Click to collapse
Thanks for the answer, it must be the 4.4.x bootloader, I didn't even ask if I had the 5.x.x one, I'm flashing the 5.0.2 About haimdall. It's wonderful, a point that can be negative is that the process is more manual, you must select each file for its respective partition, the good thing is that with it you can capture the pit file, it is very rare for an error to occur except if there is a problem on the PC or cable. It works on Linux and Windows and Mac OS X. I will return with news.

This is working amazing on my SM-T530NU, far better than whatever Nook bloat that was running before.

Installed and tested in matisselte, very good rom, very fluid. Everything works perfectly,
I will continue using this rom, very happy with how it works.
I hope you continue with the updates. Great job

groulo said:
Installed and tested in matisselte, very good rom, very fluid. Everything works perfectly,
I will continue using this rom, very happy with how it works.
I hope you continue with the updates.
Click to expand...
Click to collapse
THX.
Updates every Month ca. 15th, maybe earlier.

Hello again @crazydrive22. I tested this rom, conclusions, this rom in my normal use, very usable with tricks in developer options "disable animations scale and enable acceleration 2d". Overall is good.
Sorry. I stay practice English, on this time don,t use translator

New Builds are up.
Changelog
-synced with LOS-Source
-Security Patch December 2021

I need help, I have a problem, I have gone to update and I have restarted in recovery mode, but the tablet does not start, it is in a loop restarting all the time. I have disconnected the battery and the problem continues.
What I can do?

[ROM][12.1][UNOFFICIAL] PixysOS [PL2]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
#include <std_disclaimer.h>
/*
* Your warranty is... still valid?
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Pixys is a butter smooth Android aftermarket firmware. We handpicked the best features around and are adding our own juice into it.
Get ready to taste the unique features it brings with itself.
We aim to deliver an experience with original ideas and features along with the useful things the community is accustomed to.
@Subinsmani
@rahul9999
@@ki
@Shreejoy Dash
@kvijaya
@AxelBlaz3
@Psycho-Mods
@aswin_a_s
@Gero
@melvingarcia
Support Us if you like our work
Got an issue or suggestion? Reach us at
Telegram: https://telegram.me/pixysos_chat
Phone calls & messaging
Wi-Fi & Mobile data
VoLTE (but no icon in statusbar)
Fast charging
Dark theme, night mode
Fingerprint sensor
Face unlock
NFC
FM Radio
Wireless Bluetooth audio with AptX codec
and much more...
Less customizations but more stability...
Pixys: PixysOS
Pixys Device Sources: PixysOSDevices
NOTE: It is recommended to update your stock ROM to Android 10 before flashing this custom ROM.
IMPORTANT: If you want to use GAPPS build, it is necessary to resize system and vendor partition on your phone before flashing rom! This step will perform format of system and vendor partition and even userdata partition so make a backup if you don't want to lose your data!
If you downloaded VANILLA build, you can skip this step and if you want then you can flash gapps of your choice.
Please download this nice and user friendly Nokia Repartition Tool brought to you by Raghu Varma and look at this instructional video:
Just use the first option "3.5G S - 1G V" - it is enough for this rom.
NOTE: After resize your phone will be automatically booted to TWRP, but because this tool is intended for Nokia 6.1 Plus, this TWRP will refuse to flash ROM zip on 6.1. In this case just reboot to bootloader and download this TWRP for our Nokia 6.1, boot it and everything will be fine. Now you can begin flashing.
After booting to TWRP:
1) If you just resized your system and vendor partitions using Nokia Repartition Tool then you have already formatted userdata so you can skip this step, otherwise if you want to do a clean flash then please Format Data by typing yes, then go to the Bootloader and reboot TWRP. (For dirty flash use adb sideload method because TWRP can not decrypt Android 12 userdata partition.)
2) Flash latest ROM zip via TWRP
3) Switch to alternative slot (if you are on slot a switch to b if you are on b switch to a)
4) Reboot system
Now you are done!
SafetyNet on latest PixysOS builds passes out of the box, so you won't need root/Magisk anymore. Flash Magisk only in case that you really need to root your device.
ROM: Sourceforge download linkAt the download page, you can choose GAPPS build (with Google play store and other apps included) or VANILLA build, which contains only basic apps without Google play store (in this case you can flash gapps of your choice).
Wi-Fi Hotspot works only without password. FIXED
Custom statusbar icon pack is reverted back to default after device reboot.
Credits:
- Google for AOSP
- Dirty Unicorns
- Pixel experience
- AOSP extended
- LineageOS
- Superior OS
- Statix OS
- YAAP
- Krypton AOSP
- Project-Kaleidoscope
- AICP & POSP Team for thread template idea
- Also many pro developers who all help us to bring this rom to you...
- Please let us know if we forgot to mention your name in credits...
Contributors:
Big thanks to LineageOS developers and maintainers for Nokia 6.1 device and vendor tree on which this build is based!
Since PixysOS v5.1.5 thanks to Raghu Varma Android developer for new Nokia 6.1 device tree + vendor and kernel sources!
Kernel source:
https://github.com/LineageOS/android_kernel_nokia_sdm660
Kernel source since PixysOS v5.1.5:
https://github.com/RaghuVarma331/android_kernel_nokia_sdm660/tree/android-12.0-gcc
ROM OS Version: 12.1
ROM Kernel: 4.4.x
Based On: AOSP
Version Information
Status: Stable
Current Version: v5.1.5

Hey, really appreciate your work!) Specific bug for your rom is inability to setup magisk, because stock rom recovery "Failed to clear BCB message" error, adb sideload method doesn't works in it too. If i flash boot TWRP, then I can't boot rom, it stucks on boot logo. General bugs for all roms, such as hanging vibration (12.1 bug), gcam, that after some time of use can't take photos are here. Again. thanks for your work!!

Hi, thanks for your reply! Magisk works on this ROM, I just tested the version 24.3.
You need to boot into TWRP (twrp-3.4.0-0-PL2_sprout-11.0-20200909.img), select adb sideload option and flash latest Magisk zip. Then reboot and check the magisk app. Now you are successfully rooted. ;-)
Note: If you are installing Magisk right after flashing rom, don't forget to switch slot first!

I tried to install magisk right after I installed rom. For example now I am on a slot B, rom is installed on slot A. Magisk would setup on current slot, not as rom, that would setup on inactive slot -> I need go to the A slot to setup magisk. If I try to do that through stock rom recovery on slot A, I get error, because ADB sideload isn't working. If I try to "fastboot flash "twrp"" on slot A, then I can install magisk, but I am stuck on the rom boot logo. If I try to use twrp install.zip file from TWRP on slot B, then I get would the same problem (boot logo) on slot A. ADB sideload is installing magisk in current slot, that's why I can't do it from slot B to setup magisk on slot A. It's a bit sadly. And the second question to you, why our community vendor has general GCam problem, that is on all roms? Maybe you can contact to developers of it to fix that problem? Because it's really shame bug)

Just tell me about the experience you had with the Rom. is it smooth or not

Magisk must be installed in the same slot as the ROM. I ttied it and it works for me.
GCam problem is probably related to vendor or kernel source. Because I'm using Lineage trees to build this rom, It must be fixed by LineageOS developers.
My experience wih rom is very good, don't expect smoothness as stock, but the fact that this is an Android 12, result is really good. Small lags are ocassionally present.

Gcam not working fix it

Machi007 said:
Magisk must be installed in the same slot as the ROM. I ttied it and it works for me.
GCam problem is probably related to vendor or kernel source. Because I'm using Lineage trees to build this rom, It must be fixed by LineageOS developers.
My experience wih rom is very good, don't expect smoothness as stock, but the fact that this is an Android 12, result is really good. Small lags are ocassionally present.
Click to expand...
Click to collapse
I know that magisk have to be installed in the same as rom slot. That's why I had problems with that. If you would fix stock rom recovery, then there are no problems would be)) Yeah, rom is pretty smooth, on my opinion it works as the 10 stock, but of course android 11 custom roms work better and that's absolutely normal)

Rbargujar said:
Gcam not working fix it
Click to expand...
Click to collapse
If you tell me how to fix then I will do it. --- If you want perfect ROM then forget about custom and use stock.
FarLine99 said:
I know that magisk have to be installed in the same as rom slot. That's why I had problems with that. If you would fix stock rom recovery, then there are no problems would be)) Yeah, rom is pretty smooth, on my opinion it works as the 10 stock, but of course android 11 custom roms work better and that's absolutely normal)
Click to expand...
Click to collapse
I don't understand why to use stock recovery when we have TWRP.

Machi007 said:
If you tell me how to fix then I will do it. --- If you want perfect ROM then forget about custom and use stock.
I don't understand why to use stock recovery when we have TWRP.
Click to expand...
Click to collapse
Because if we try to use flash boot twrp on rom slot, then rom can't boot, it stuck on boot logo)

OK, I didn't try to flash Magisk zip right after ROM flashing... I have fully configured ROM with installed apps etc. and in this state I booted into TWRP flashed Magisk zip and ROM normally booted, I just found Magisk in apps and everything worked. This is my experience.

Machi007 said:
OK, I didn't try to flash Magisk zip right after ROM flashing... I have fully configured ROM with installed apps etc. and in this state I booted into TWRP flashed Magisk zip and ROM normally booted, I just found Magisk in apps and everything worked. This is my experience.
Click to expand...
Click to collapse
Maybe) In my experience, if I flash TWRP after flashing rom the rom doesn't boot, at all. Maybe I have done something wrong, but any way, if you will fix the stock recovery, it would be better!)

I need to clarify this: You are trying to flash TWRP using twrp-installer zip? If yes then this will not work on Android 12 ROM!
Do this to temporary boot TWRP (in download mode):
fastboot flash recovery twrp.img <----- this command returns error because our phone does not have the recovery partition, but it is mandatory to execute this command first --- then:
fastboot boot twrp.img <----- this command temporary boots TWRP on your Nokia 6.1 and now is the right time to install Magisk...
I recommend THIS TWRP version, just download the file and rename to twrp.img.

Machi007 said:
I need to clarify this: You are trying to flash TWRP using twrp-installer zip? If yes then this will not work on Android 12 ROM!
Do this to temporary boot TWRP (in download mode):
fastboot flash recovery twrp.img <----- this command returns error because our phone does not have the recovery partition, but it is mandatory to execute this command first --- then:
fastboot boot twrp.img <----- this command temporary boots TWRP on your Nokia 6.1 and now is the right time to install Magisk...
I recommend THIS TWRP version, just download the file and rename to twrp.img.
Click to expand...
Click to collapse
I tried to use twrp installer first, it did not worked for me, then I tried to use fastboot flash boot method, that is recommended for this TWRP. Using both flash recovery and boot method is new for me, so maybe it will be ok. But flash boot method doesn't work. And yeah, I used recommended from you Raghu's TWRP.

New build uploaded: PixysOS v5.1.3
- June security patch
- Fixed WiFi hotspot
- Google Camera should work much better now
- Build based on latest PixysOS sources with latest improvements and new functions added by ROM developers
And I would like to thank Raghu Varma which helped me a lot with fighting bugs!

Machi007 said:
New build uploaded: PixysOS v5.1.3
- June security patch
- Fixed WiFi hotspot
- Google Camera should work much better now
- Build based on latest PixysOS sources with latest improvements and new functions added by ROM developers
And I would like to thank Raghu Varma which helped me a lot with fighting bugs!
Click to expand...
Click to collapse
Maybe would try later, thanks for your work!)

Is anyone able to check if Duo Mobile 2fa is working?

I did all the steps, installed the rom, It siad "Fhasing A/B Zip to ianctive slot: B" after I try to change the slot and reboot, it says no OS installed... Is anyone else having this issue?
I did the Nokia Partition Tool, rebooted to bootloader, booted into the 3.4 TWRP it suggested and did the steps, It still said the error and rebooted back into TWRP*
EDIT: I was redoing it for the 3rd time as I typed this message and it magically worked.

Just a request, if it isn't too much to ask for...
Would it be possible to provide a vanilla build too? Perhaps then the installation would fit on the device without repartitioning -- I have made a couple of observations that have made me arrive at this conclusion:
My experience with LineageOS 19 is that the build + MindTheGApps package fits on the stock system partition without the need for repartitioning.
On the official PixysOS downloads page, I see that the size difference between Android 12 vanilla and GApps builds for one of the devices is something like 600 MB.
I am downloading the build at this instant, and I'm going to try fiddling around with the system image to make it fit on my PL2 before resorting to repartitioning (because we all know how much of a pain that can be ). I intend to install it later in the day, so I don't yet have feedback on the build itself.
Cheers! And thanks for your effort and time!
EDIT: I must also add that for a) people who prefer to use only core Google apps like GMS and Play Store (e.g. myself), and b) people who do not want to use even core Google services, a vanilla build would be ideal.

Vedanth Padmaraman said:
Just a request, if it isn't too much to ask for...
Would it be possible to provide a vanilla build too?
Click to expand...
Click to collapse
I'll consider it, maybe from the next build I'll provide both versions.

Better Mobile App

welcome