Related
At the moment we have rather dfficult situation because custom ROMs based on AOSP (such as my AD which is not yet public) require previous OOS LP firmware, while OOS 3.0 includes new MM firmware which breaks both older recoveries and custom ROMs.
As I need to switch between OOS 3.0 and my AD quite frequently, I created two helpful flashable zips so I can do that easily, and because it's useful for me, perhaps it'll be useful for you too.
Download: MM | LP
Instructions:
- Download the firmware you want (or both, if you want easy switching)
- Unpack downloaded zip, you'll find firmware-update.zip and recovery.img inside
- Put both of those files on your phone, in appropriately named directory such as "firmware-LP" or "firmware-MM"
- When you will need to do a switch, simply firstly flash firmware-update.zip, then flash recovery.img as recovery image via "flash image" option in TWRP
- Reboot to load new firmware
That's it, this way you firstly flash chosen firmware version, and then TWRP recovery that works with it.
So if you have two TWRP backups - one of OOS 3.0 and one of CM13.0, make sure that you have proper firmware (and recovery) after restoring backup - LP for CM13.0, and MM for OOS 3.0.
Situation should soon improve (when OnePlus pushes kernel sources, and MM-based ROMs will rebase), but until then it's wise to keep both of those firmware + recovery combos on your sd card, so you can do a switch without any problem on as-needed basis.
Hope it helps. Try to be careful with those, if you mix up wrong recovery with wrong firmware you'll need to flash proper recovery.img variant via fastboot. You can't hard brick anything by using those files, in worst case soft-brick if both your recovery and your ROM will be for wrong firmware you have.
Have fun.
We are waiting for AD release. At least a beta?
mido25 said:
We are waiting for AD release. At least a beta?
Click to expand...
Click to collapse
Don't you know how to use the JustArchi's github?
Wow, really helps. I wish I have my OnePlus2 now.
Guihardrock said:
Don't you know how to use the JustArchi's github?
Click to expand...
Click to collapse
No sir. I do not know. Once I tried downloading a build from the below location and tried flashing it but recovery didn't allow me to flash it.
https://t.co/96EZIl6dJJ
I don't know why is it failed. My knowledge about github and making builds are limited.
mido25 said:
No sir. I do not know. Once I tried downloading a build from the below location and tried flashing it but recovery didn't allow me to flash it.
https://t.co/96EZIl6dJJ
I don't know why is it failed. My knowledge about github and making builds are limited.
Click to expand...
Click to collapse
ok so i will explain you when you download that file you have to unzip it and then you will have a folder with another folder (if you choosed unzip in archidreoid etc.zip so inside that folder you will have the necesary files (view the attached screenshot) you will have to pack them in a zip file
hope it helps but try to download the latest file to do that cause last time i tried the oneplus2 archidroid there were things that dint work such as ad filter
Guihardrock said:
ok so i will explain you when you download that file you have to unzip it and then you will have a folder with another folder (if you choosed unzip in archidreoid etc.zip so inside that folder you will have the necesary files (view the attached screenshot) you will have to pack them in a zip file
hope it helps but try to download the latest file to do that cause last time i tried the oneplus2 archidroid there were things that dint work such as ad filter
Click to expand...
Click to collapse
Thanks a lot for your guidance. Appreciate if you can give a link to his latest build.
Sent from my ONE A2003 using Tapatalk
mido25 said:
Thanks a lot for your guidance. Appreciate if you can give a link to his latest build.
Sent from my ONE A2003 using Tapatalk
Click to expand...
Click to collapse
Here you go https://github.com/ArchiDroid/ArchiDroid/archive/oneplus2-cm-experimental.zip but its experimental so you can expect bugs
Lost recovery
Hi sir,
I have flashed MM using the TWRP recovery as normal. But now I have lost my recovery. I am not able to boot into any recovery. Pls help.
JustArchi said:
At the moment we have rather dfficult situation because custom ROMs based on AOSP (such as my AD which is not yet public) require previous OOS LP firmware, while OOS 3.0 includes new MM firmware which breaks both older recoveries and custom ROMs.
As I need to switch between OOS 3.0 and my AD quite frequently, I created two helpful flashable zips so I can do that easily, and because it's useful for me, perhaps it'll be useful for you too.
Download: MM | LP
Instructions:
- Download the firmware you want (or both, if you want easy switching)
- Unpack downloaded zip, you'll find firmware-update.zip and recovery.img inside
- Put both of those files on your phone, in appropriately named directory such as "firmware-LP" or "firmware-MM"
- When you will need to do a switch, simply firstly flash firmware-update.zip, then flash recovery.img as recovery image via "flash image" option in TWRP
- Reboot to load new firmware
That's it, this way you firstly flash chosen firmware version, and then TWRP recovery that works with it.
So if you have two TWRP backups - one of OOS 3.0 and one of CM13.0, make sure that you have proper firmware (and recovery) after restoring backup - LP for CM13.0, and MM for OOS 3.0.
Situation should soon improve (when OnePlus pushes kernel sources, and MM-based ROMs will rebase), but until then it's wise to keep both of those firmware + recovery combos on your sd card, so you can do a switch without any problem on as-needed basis.
Hope it helps. Try to be careful with those, if you mix up wrong recovery with wrong firmware you'll need to flash proper recovery.img variant via fastboot. You can't hard brick anything by using those files, in worst case soft-brick if both your recovery and your ROM will be for wrong firmware you have.
Have fun.
Click to expand...
Click to collapse
Your ll recovery is in chinese. How to change it?
EDIT: Forget it. I found where to change the language! Thanks.
eswa1068 said:
Hi sir,
I have flashed MM using the TWRP recovery as normal. But now I have lost my recovery. I am not able to boot into any recovery. Pls help.
Click to expand...
Click to collapse
Use fastboot to flash the recovery
Guihardrock said:
Here you go https://github.com/ArchiDroid/ArchiDroid/archive/oneplus2-cm-experimental.zip but its experimental so you can expect bugs
Click to expand...
Click to collapse
Thank you Sir
Tierri said:
Your ll recovery is in chinese. How to change it?
EDIT: Forget it. I found where to change the language! Thanks.
Click to expand...
Click to collapse
Hi,
Can u let me know where to change the language of twrp ?
Sent from my ONE A2003 using Tapatalk
amit_sen said:
Hi,
Can u let me know where to change the language of twrp ?
Sent from my ONE A2003 using Tapatalk
Click to expand...
Click to collapse
Yes. See the images to help you.
Guihardrock said:
Here you go https://github.com/ArchiDroid/ArchiDroid/archive/oneplus2-cm-experimental.zip but its experimental so you can expect bugs
Click to expand...
Click to collapse
It's around 900 mb zip..?
And did anyone try that build..?
Mohit31 said:
It's around 900 mb zip..?
And did anyone try that build..?
Click to expand...
Click to collapse
Its because of the aroma you can choose the gapps of your choice...
Guihardrock said:
Its because of the aroma you can choose the gapps of your choice...
Click to expand...
Click to collapse
OK... Thanks
Btw Are you on this build..
A quick feedback on the ROM would be great
This thing should be STICKY
Finally was able to install CM13 properly using this recovery without Google Services crashing.
Mohit31 said:
OK... Thanks
Btw Are you on this build..
A quick feedback on the ROM would be great
Click to expand...
Click to collapse
Now i am in oos3 but when justarchi release archidroid i wont use any other rom, i had so great experience with this on my s3
Edit: i am gonna try it :3 yo made me do it
Mohit31 said:
OK... Thanks
Btw Are you on this build..
A quick feedback on the ROM would be great
Click to expand...
Click to collapse
rom is smooth as h*ll and battery is better than in normal cm13 but as i said the backed dont work yet :3 and aroma is not fully functional with the bootanimation and root (but the rom has the cm superuser)
Hi!
Just wanted to publish here the CR-DROID-ROM for our beloved Xiaomi Redmi 3/Pro.
Note:
I'm only the publisher, not the maintainer of this ROM. While you can post bug-reports here, they cannot be fixed by me.
Description from the dev-site:
This is a free AOSP / CyanogenMod Android based ROM bringing a lot of custom features ported from AOSPA, SlimRoms, OmniRom and many others great roms out there
crDroid brings what Android have of most advanced in terms of customization and stability.
Click to expand...
Click to collapse
The dev-site at Google+:
https://plus.google.com/communities/118297646046960923906
LINKS:
DOWNLOAD-LINK for crDroid with standard-kernel (hosted at Mega.nz)
DOWNLOAD-LINK for crDroid with DT2W-kernel (hosted at Mega.nz)
WHOLE DOWNLOAD-FOLDER (with older versions)
New Revision is out:
Xiaomi Redmi 3/Pro ROM CR-Droid 7.1.2 V3.8.3 Official-Build 2017-11-25
Just flash with with any version of Open-Gapps 7.1 (ARM64) (I recommend to use "Pico") and Magisk.zip. Don't forget to install the app "Magisk-Manager"!
Credits go out to Bondstas (UA) for generating this ROM.
P.S.:
The thread will be updated from time to time if I notice, that a new version of CR-Droid is out.
Update-history:
15-08/2017: CR-Droid V3.7 from 15-08/2017 is out!
25-08/2017: CR-Droid V3.7 from 15-08/2017 with DT2W-kernel added!
11-10/2017: CR-Droid V3.7 from 09-10/2017 is out!
14-10/2017: CR-Droid V3.7 from 09-10/2017 with DT2W-kernel added!
18-11/2017: CR-Droid V3.8.2 from 01-11/2017 is out!
31-01/2018: CR-Droid V3.8.3 from 25-11/2017 released!
01-02/2017: CR-Droid V3.8.3 from 25-11/2017 with DT2W-kernel added!
Thanks a lot!
Another ROM for our Redmi3!
crDroid V3.7 from 15-08/2017 is released! - Download see 1st post!
Is this the same with bondstas build ?
ABDZR_43 said:
Is this the same with bondstas build ?
Click to expand...
Click to collapse
No, I think it's the one from Winkarbik.
ABDZR_43 said:
Is this the same with bondstas build ?
Click to expand...
Click to collapse
frankonia said:
No, I think it's the one from Winkarbik.
Click to expand...
Click to collapse
but, the rom size is the same
Ok, then you are probably right. I have it from 4PDA.
ABDZR_43 said:
but, the rom size is the same
Click to expand...
Click to collapse
The best way is by calculating md5 checksum of zips.
Sent from my Redmi Note 4 using XDA Labs
Double tap to wake DT2W kernels for CR-Droid that I uploaded to Mega from Bondstas on 4PDA. I use rom version 3.6 coming from RR and it's works great. It's smooth and everything works. I found version 3.7 had buggy sound issues.
You must have a focaltech panel. https://forum.xda-developers.com/showpost.php?p=68344933&postcount=493
3.6 https://mega.nz/#!35AVQKRR!M5b72YaeK9vv0JMs0x-iZupP93KVKofP8095JJ3GL2A
3.7 https://mega.nz/#!vlpUAbCY!yWF15BcwyKVGB1X4TxF3bWoZPiXNRFbKIHWn6zNxNI4
ABDZR_43 said:
Is this the same with bondstas build ?
Click to expand...
Click to collapse
I took a look in the "About"-menue: Under "Kernel-version" stands "3.10.107-lineageos.... winkarbik@ubuntusrv #1"
So this ROM is from WinKarbik.
double-post => deleted!
tripper22 said:
Double tap to wake DT2W kernels for CR-Droid that I uploaded to Mega from Bondstas on 4PDA. I use rom version 3.6 coming from RR and it's works great. It's smooth and everything works. I found version 3.7 had buggy sound issues.
Click to expand...
Click to collapse
I inserted the DT2W-kernel to the main ROM-file. Download-link in the first post!
This ROM has problem with Xposed making phone unbootable.
I tried two other ROMs (Lineage and AICP) which don't have the problem.
hi !
please can you guide me on how to
1. unlock bootloader of my redmi3 ( xiaomi has refused to acknowledge my request)
2. flashing this Custom ROM of yours. as well as the kernel
reason for this:
1. google play isn't working
2. all those Chinese apps with not language to know what they are about is taking up so much space and running
thanks alot
JOLLYNERY said:
hi !
please can you guide me on how to
1. unlock bootloader of my redmi3 ( xiaomi has refused to acknowledge my request)
2. flashing this Custom ROM of yours. as well as the kernel
reason for this:
1. google play isn't working
2. all those Chinese apps with not language to know what they are about is taking up so much space and running
thanks alot
Click to expand...
Click to collapse
Excuse me in advance for going OT but before trying to install custom roms, have you tried to flash global version of MIUI that is bundled with most of world languages and can fit your needs: it has got working google play, not a single china app and is working fairly well in all parts. It can be easily flashed on locked bootloader as well using miflash tool, a windows 64 bit system and putting the phone in download mode.
You can find most of informations here http://en.miui.com/thread-228048-1-1.html
@ Ivan thanks for the suggestion. Sincerely, I'm grateful. It's just I think I'm feed up with everything not custom. This is the first phone that I haven't bin able to gain root access as well as flashing custom ROM.
I want to even run twrp as well, but I just learnt of dm-verity. I just need a way out of this.
JOLLYNERY said:
@ Ivan thanks for the suggestion. Sincerely, I'm grateful. It's just I think I'm feed up with everything not custom. This is the first phone that I haven't bin able to gain root access as well as flashing custom ROM.
I want to even run twrp as well, but I just learnt of dm-verity. I just need a way out of this.
Click to expand...
Click to collapse
If you have already unlocked your bootloader (otherwise have a look at this: http://en.miui.com/thread-324619-1-1.html), install twrp (following instructions you can find here on xda) and then, when you access for the first time in TWRP (immediately after you flash TWRP I mean!), flash lazy-flasher that you can find here http://en.miui.com/thread-310923-1-1.html: this will patch boot.img and you will have a "permanent" TWRP that won't go away at first system restart. Now you can install SuperSU or any custom rom you want to try without any problem! Now, after much time on MIUI 8, I'm on LOS 14.1, but I've tried many other custom roms, each of one was stable and good for daily use except AEX which is a very good rom but someone (like me), on latest build, wasn't able to use internet data for a bug. CR-Droid is very good as well!
ivanhoe1976 said:
If you have already unlocked your bootloader (otherwise have a look at this: http://en.miui.com/thread-324619-1-1.html), install twrp (following instructions you can find here on xda) and then, when you access for the first time in TWRP (immediately after you flash TWRP I mean!), flash lazy-flasher that you can find here http://en.miui.com/thread-310923-1-1.html: this will patch boot.img and you will have a "permanent" TWRP that won't go away at first system restart. Now you can install SuperSU or any custom rom you want to try without any problem! Now, after much time on MIUI 8, I'm on LOS 14.1, but I've tried many other custom roms, each of one was stable and good for daily use except AEX which is a very good rom but someone (like me), on latest build, wasn't able to use internet data for a bug. CR-Droid is very good as well!
Click to expand...
Click to collapse
lemme try it out bro, thanks alot.
JOLLYNERY said:
lemme try it out bro, thanks alot.
Click to expand...
Click to collapse
Guys it didn't work out for. I tried updating through updater but it didn't. Then through pc, it didn't respond. Says I am not allowed to update to any other ROM that is, not a STABLE.
I would b grateful if u assist.
Thanx
ivanhoe1976 said:
if you have already unlocked your bootloader (otherwise have a look at this: http://en.miui.com/thread-324619-1-1.html), install twrp (following instructions you can find here on xda) and then, when you access for the first time in twrp (immediately after you flash twrp i mean!), flash lazy-flasher that you can find here http://en.miui.com/thread-310923-1-1.html: This will patch boot.img and you will have a "permanent" twrp that won't go away at first system restart. Now you can install supersu or any custom rom you want to try without any problem! Now, after much time on miui 8, i'm on los 14.1, but i've tried many other custom roms, each of one was stable and good for daily use except aex which is a very good rom but someone (like me), on latest build, wasn't able to use internet data for a bug. Cr-droid is very good as well!
Click to expand...
Click to collapse
it didnt work out. It requested i can only update with stable rom. Because i tried updating with global dev rom . I might just trash this fone
Note : - I am not to be held responsible for any of the damage that occurs to your device during this process. You are yourself responsible for any damage done (if) to your device during this process.
ZUI Rom is better then stock android rom
ZUI 3.1
Android 7.1.1
Rom Status: Stable
Features:-
themes
change fonts
fast charging (Turbo charging)
wireless Display working in ZUI rom (Problem in stock android)
indian band supports (no network issues)
u-touch
getting OTA updates (do not Flash any other recovery after installing this rom)
There is no bugs found by me @mr_patel031
SCREENSHOTS :- http://motog5szuirom.blogspot.in/2018/01/zui-31-for-moto-g5s-stock-rom.html
Credits
ZUI rom developers
Installation :- ( http://ceesty.com/wgKBUx )
Pre-Requirements :-
* Bootloader unlock ( https://forum.xda-developers.com/moto-g5s/how-to/guide-unlock-bootloader-moto-g5s-t3691200 )
* ZUI rom Download ( http://corneey.com/wgCfW6 )
Now go to Install Zui rom step by step:-
METHOD 1
1. Go to Fastboot mode ( Press Vol Down Or Up and Power ) make sure you have install proper drivers.
2. Install RDS Tool In PC and run SDL.exe from installation directory.
3. now, click on [...] and select Flashfile.xml from unpack rom directory.
4. make sure your device show in tool device list.
5. click Start to start flashing rom.
6. Do not Remove USB untill tool show COMPLETE or PASS
If you facing Boot.img fail problem or Rom fail to install then try this
METHOD 2
* Unlock bootloader and flash TWRP recovery (Flash TWRP https://forum.xda-developers.com/moto-g5s/how-to/guide-unlock-bootloader-moto-g5s-t3691200 )
* Wipe clean (Cache, Data, Dalvik/ART, System)
* Install Any custom rom ( https://forum.xda-developers.com/moto-g5s/development/rom-resurrection-remix-v5-8-5-t3737716 )
Now try METHOD 1
ZUI rom change language Chinese to English
http://ceesty.com/wgKNGP
Install Google Play Store
* change language Chinese to English
* go to Zui app store and search Google and DOWNLOAD google play.
Your can customize rom as your wish
Remove Unlocked Bootloader Message Moto G5S
https://forum.xda-developers.com/moto-g5s/how-to/remove-unlocked-bootloader-message-moto-t3699273
Big Thank You
@xda developers
@Nicolas36
@lohanbarth
@bycabraljr
Works on G5S XT1792?
rssxda said:
Works on G5S XT1792?
Click to expand...
Click to collapse
Good evening, this rom is not a custom rom, but a stock rom for a variant of the G5S.
rssxda said:
Works on G5S XT1792?
Click to expand...
Click to collapse
you can try zui rom by METHOD 2
and
if you get any problem then go to fastboot mode and flash your XT1792 MODEL stock rom ( https://www.stockrom.net/2017/10/st...a-moto-g5-s-montana-android-7-1-1-nougat.html )
I will try to build a flashable stock with this rom.
lohanbarth said:
I will try to build a flashable stock with this rom.
Click to expand...
Click to collapse
i am waiting... for your rom
I get going as soon as I get home from work
Yes! Works on G5S XT1792!!!!
rssxda said:
Yes! Works on G5S XT1792!!!!
Click to expand...
Click to collapse
Welcome to zui:good:
do not flash TWRP its disable OTA updates
and Remove Bootloader warning logo :- https://forum.xda-developers.com/moto-g5s/how-to/remove-unlocked-bootloader-message-moto-t3699273
Do you have any method of installing another language? (pt-BR)?
UryuuChangAmanno said:
Do you have any method of installing another language? (pt-BR)?
Click to expand...
Click to collapse
System support only 4 language
but there is multiple language for whatsapp facebook
check screenshots
mr_patel031 said:
System support only 4 language
but there is multiple language for whatsapp facebook
check screenshots
Click to expand...
Click to collapse
Maybe you can use this?
https://zukfans.eu/community/threads/multi-language-patch-on-stock-zui-2-5-462-zui-3-1-187.6984/
GoldeneyeS2 said:
Maybe you can use this?
https://zukfans.eu/community/threads/multi-language-patch-on-stock-zui-2-5-462-zui-3-1-187.6984/
Click to expand...
Click to collapse
brother i am not a developer
i think there is no need of all languages
the "V 3.1 - initial release" and a flashable zip with the twrp
lohanbarth said:
the "V 3.1 - initial release" and a flashable zip with the twrp
Click to expand...
Click to collapse
TWRP disable OTA updates bro
Will you have other package updates? Updated and still in the October patch!
rssxda said:
Will you have other package updates? Updated and still in the October patch!
Click to expand...
Click to collapse
may be Lenovo will give update in February android oreo, so wait
Can we have the rom in TWRP flashabale zip? Someone tried to install the rom on the European model? Thanks
catalin habdul said:
Can we have the rom in TWRP flashabale zip? Someone tried to install the rom on the European model? Thanks
Click to expand...
Click to collapse
TWRP recovery will Disable OTA updates so you cant update your Phone or your have to wait for Oreo stable update...
mr_patel031 said:
TWRP recovery will Disable OTA updates so you cant update your Phone or your have to wait for Oreo stable update...
Click to expand...
Click to collapse
I don't need ota updates I just want to now if the zip can be flashed with the TWRP recovery. Thanks
[PORT][OFFICIAL][ROM][8.1][Pixel Experience][07/06/18]
Thanks to @sooti
Original thread
Download link Mi5X:
Google Drive
How to install:
- Unlock your bootloader
- [Optional] Flash A1 Oreo Firmware
- Flash Oreo TWRP modded
- Wipe Data/Cache/Dalvik/System
- Flash ROM zip through TWRP
- Reboot to recovery using TWRP Recovery (In TWRP go to Reboot -> recovery)
- In TWRP go to Advanced -> Terminal -> Write "a1to5x" -> press Enter
- Reboot to System
Known issues:
- Please don't install OTA package. It won't work.
- You tell me.
Contributors
Alex12, sooti
ROM OS Version: 8.x Oreo
ROM Kernel: "Sooti"
ROM Firmware Required: TWRP oreo by Alex12
Version Information
Status: Stable
Thanks to a good job
How to flash a1 oreo firmware?
---------- Post added at 01:23 PM ---------- Previous post was at 12:54 PM ----------
I noticed that this rom is originally ported from mi a1 and a lot of awesome rom like RR is on the mi a1 thread, question can i flash the other rom straight and flashed it with the same procedure?
mCdroid09 said:
How to flash a1 oreo firmware?
---------- Post added at 01:23 PM ---------- Previous post was at 12:54 PM ----------
I noticed that this rom is originally ported from mi a1 and a lot of awesome rom like RR is on the mi a1 thread, question can i flash the other rom straight and flashed it with the same procedure?
Click to expand...
Click to collapse
For A1 Oreo firmware: here
What will happpen if i dont flash the a1 firmware? It said "optional"?
a1 firmware and ‘a1to5x’ is not necessary ,just flash rom does work
A custom rom or maybe something remarkable?
Is that the truth if I understand that a terminal with android stock needs that something else that provides a custom rom, but I see that there are not many differences between them.
Is this more advisable?
Thanks
lslvxy said:
a1 firmware and ‘a1to5x’ is not necessary ,just flash rom does work
Click to expand...
Click to collapse
Really? I don't think it can boot if you do not convert kernel with "a1to5x"
bragon01 said:
Really? I don't think it can boot if you do not convert kernel with "a1to5x"
Click to expand...
Click to collapse
i just flash rom without Firmware and a1to5x ，has no problem ，work well
Does stock mi camera apps with background blur work?
mCdroid09 said:
Does stock mi camera apps with background blur work?
Click to expand...
Click to collapse
Yep working like brilliant even ar stacker.
mi stock camera app not included !! how to solve ?
xdamami said:
Yep working like brilliant even ar stacker.
Click to expand...
Click to collapse
mi stock camera app not included !! how to solve ?
riddle1992 said:
mi stock camera app not included !! how to solve ?
Click to expand...
Click to collapse
https://forum.xda-developers.com/mi-a1/themes/oreo-mia1-stock-rom-camera-app-custom-t3758543
Best custom rom sonfar ????
bragon01 said:
[PORT][OFFICIAL][ROM][8.1][Pixel Experience][07/06/18]
How to install? I followed every thing and flashed A1 Firmware... When i tried the Oreo Modded TWRP to flash the Rom zip, It says Zip Error... I cannot flash any rom or kernel of A1, when i try to flash zip it detects my device is not A1 so it shows device error... How to fix that?
Click to expand...
Click to collapse
Ritwik Rahman said:
bragon01 said:
[PORT][OFFICIAL][ROM][8.1][Pixel Experience][07/06/18]
How to install? I followed every thing and flashed A1 Firmware... When i tried the Oreo Modded TWRP to flash the Rom zip, It says Zip Error... I cannot flash any rom or kernel of A1, when i try to flash zip it detects my device is not A1 so it shows device error... How to fix that?
Click to expand...
Click to collapse
Maybe you should format your system partition and flash rom immediately
Click to expand...
Click to collapse
bragon01 said:
Ritwik Rahman said:
Maybe you should format your system partition and flash rom immediately
Click to expand...
Click to collapse
I flashed A1 firmware, Wiped Every Partition from recovery (Except Internal Memory), And flashed the rom but it shows Device Error
Click to expand...
Click to collapse
Ritwik Rahman said:
bragon01 said:
I flashed A1 firmware, Wiped Every Partition from recovery (Except Internal Memory), And flashed the rom but it shows Device Error
Click to expand...
Click to collapse
You shoud check system partition because wiping makes it blank and 0 MB.
Check and re-format system partition with ext4
Click to expand...
Click to collapse
Awesome ROM & super clear instruction. Thank you!
This rom is amazing anyone who has boot issues make sure you run that command in twrp
- In TWRP go to Advanced -> Terminal -> Write "a1to5x" -> press Enter
Hi. I have a Huawei MediaPad M5 8.4 with EMUI 9.1
The loader is open. How can I roll back to 8.1?
why rollback? if your bootloader is allready open?
flash treble android 10
havoc os is running on my m5 wifi and it's super smooth
i agree, drop Emui and grab AOSP. i've just flashed Quack (android10) Phh treble v.222 and it is perfect, smooth and AOSP!!!!
karlkluwe001 said:
why rollback? if your bootloader is allready open?
flash treble android 10
havoc os is running on my m5 wifi and it's super smooth
Click to expand...
Click to collapse
U flashed it with fastboot right? Aonly with gapps or witch one u flashed?
daser4berlin said:
U flashed it with fastboot right? Aonly with gapps or witch one u flashed?
Click to expand...
Click to collapse
yup flashed via fastboot
fastboot flash system xxxxxxx.img
(keep in mind to unpack rom after downloading - it comes in .xz packed format)
for the m5 wifi it's A64-AB,
( not A64-Aonly)
and having emui 9 on it before i flashed gsi rom
i used Havoc Rom - vanilla
https://forum.xda-developers.com/pr...e-development/havoc-os-3-3-gsi-archs-t4076903
karlkluwe001 said:
yup flashed via fastboot
fastboot flash system xxxxxxx.img
(keep in mind to unpack rom after downloading - it comes in .xz packed format)
for the m5 wifi it's A64-AB,
( not A64-Aonly)
and having emui 9 on it before i flashed gsi rom
i used Havoc Rom - vanilla
https://forum.xda-developers.com/pr...e-development/havoc-os-3-3-gsi-archs-t4076903
Click to expand...
Click to collapse
Yo.. Have u a Trick to become working playstore on it?
Gsi with gapps included wont Flash in fastboot.. Only vanilla build.. And for me the vanilla havoc was sucking xtrem on battery for me..
daser4berlin said:
Yo.. Have u a Trick to become working playstore on it?
Gsi with gapps included wont Flash in fastboot.. Only vanilla build.. And for me the vanilla havoc was sucking xtrem on battery for me..
Click to expand...
Click to collapse
yes - battery gets better when u choose the disable telephony option in the huawei special options in system settings
i don't use google sevices, i "adb install" my apps most of them are from fdroid, so i cant help you there
daser4berlin said:
Yo.. Have u a Trick to become working playstore on it?
Gsi with gapps included wont Flash in fastboot.. Only vanilla build.. And for me the vanilla havoc was sucking xtrem on battery for me..
Click to expand...
Click to collapse
Phh Treble Quack (Android 10) is available in different flavours: vanilla. floss, gapps, go (see here). I use the gapps version and it is pre-rooted with supersu (not magisk on GSI)