[RECOVERY][OFFICIAL] TWRP 3.6.0_9-0 [ T03G N7100 T0LTE N7105] - Galaxy Note II N7105 Android Development

[RECOVERY][OFFICIAL] TWRP 3.6.0_9-0 [ T03G N7100 T0LTE N7105] - Galaxy Note II N7105 Android Development

The new builds are online!

Update 16.06.2021:
Brought support for GSI flash & reused old HIDDEN partition as vendor.
Brought support for encrypted /data partition.

Hi, I'm unable to verify any of your new builds with PGP, is there a chance you could do something about that?
Code:
C:\Mike-Data\Android\N2>gpg --verify twrp-3.5.2_9-1-t0lte.img.tar.asc twrp-3.5.2_9-1-t0lte.img.tar
gpg: Signature made 04/20/21 16:22:48 Central Europe Daylight Time
gpg: using RSA key 95707D42307C9D41D09BF7091D8597D7891A43DF
gpg: BAD signature from "TeamWin <[email protected]>" [full]

Mike4 said:
Hi, I'm unable to verify any of your new builds with PGP, is there a chance you could do something about that?
Code:
C:\Mike-Data\Android\N2>gpg --verify twrp-3.5.2_9-1-t0lte.img.tar.asc twrp-3.5.2_9-1-t0lte.img.tar
gpg: Signature made 04/20/21 16:22:48 Central Europe Daylight Time
gpg: using RSA key 95707D42307C9D41D09BF7091D8597D7891A43DF
gpg: BAD signature from "TeamWin <[email protected]>" [full]
Click to expand...
Click to collapse
I have no idea, but I will check this.

Mike4 said:
Hi, I'm unable to verify any of your new builds with PGP, is there a chance you could do something about that?
Click to expand...
Click to collapse
I've asked bigbif and here's his answere:
bigbif:
sometimes the GPG generated is borked I will regenerate it tonight
Click to expand...
Click to collapse

Update 10.12.2021:
Removed bash to bring TWRP 3.6.0_9 up

html6405 said:
Update 16.06.2021:
Brought support for GSI flash & reused old HIDDEN partition as vendor.
Brought support for encrypted /data partition.
Click to expand...
Click to collapse
What kinds of GSI can be flashed ? A ? AB ?

Concept48 said:
What kinds of GSI can be flashed ? A ? AB ?
Click to expand...
Click to collapse
These devices only can support A partition layout, but they are covered in ab script, so they would be called phhgsi_a64_ab for example.
But, there is only one test GSI available from myself so far.
All GSI builders would need to apply some exynos4 specific patches, so this project only could grow if I would get some support.
(Tested AOSP and Bliss as GSI's so far on exynos4 devices, including i9300, except n7100)

html6405 said:
These devices only can support A partition layout, but they are covered in ab script, so they would be called phhgsi_a64_ab for example.
But, there is only one test GSI available from myself so far.
All GSI builders would need to apply some exynos4 specific patches, so this project only could grow if I would get some support.
(Tested AOSP and Bliss as GSI's so far on exynos4 devices, including i9300, except n7100)
Click to expand...
Click to collapse
Wow that is soooo amazing HTML .. Of course I will do a project on that GSI , jCan you link me up with the GSI ,

html6405 said:
The new builds are online!
Click to expand...
Click to collapse
I,m done bro , rendering then upload - Midnight Show !! It runs better then expected , i,m very happy !

Concept48 said:
It runs better then expected , i,m very happy !
Click to expand...
Click to collapse
I've watched your video today, thx for this and btw,
the video recording seems to be corrupted through gCam, I've tested open camera and it worked fine .
But the ROM is for sure not finished.
Concept48 said:
Wow that is soooo amazing HTML .. Of course I will do a project on that GSI , jCan you link me up with the GSI ,
Click to expand...
Click to collapse
[GSI][11][ EXYNOS4 SMDK4412 ][N8000, N801X, N8020, I9300, N5100, N51XX, N7100, ...][ALPHA] [EOL]
Here you will find my exynos4 compatible GSI's. This work is based on the magic of @phhusson, so thank you very much for this. Don't forget, that you need an treblelized ROM to support this. Do you like my work? Than you can simply hit...
forum.xda-developers.com
Here you can find it, but it's untested with the n7100, you need LOS18.1 as basis. (The boot and treblelized vendor image)
But with these basic steps, we would be able to create many A11 ROM's and share them with the community and only the system.img flash is necessary to change the ROM.
And the best thing would be, one image for all exynos 4 devices .
But this is in a real early stage, I have not the time to concentrate on all of my projects yet.

html6405 said:
I've watched your video today, thx for this and btw,
the video recording seems to be corrupted through gCam, I've tested open camera and it worked fine .
But the ROM is for sure not finished.
[GSI][11][ EXYNOS4 SMDK4412 ][N8000, N801X, N8020, I9300, N5100, N51XX, N7100, ...][ALPHA] [EOL]
Here you will find my exynos4 compatible GSI's. This work is based on the magic of @phhusson, so thank you very much for this. Don't forget, that you need an treblelized ROM to support this. Do you like my work? Than you can simply hit...
forum.xda-developers.com
Here you can find it, but it's untested with the n7100, you need LOS18.1 as basis. (The boot and treblelized vendor image)
But with these basic steps, we would be able to create many A11 ROM's and share them with the community and only the system.img flash is necessary to change the ROM.
And the best thing would be, one image for all exynos 4 devices .
But this is in a real early stage, I have not the time to concentrate on all of my projects yet.
Click to expand...
Click to collapse
That's what I saw , but hey I dont care this is first build ever ,, Open Camera works perfectly ,. Some random reboots after trying certain apps , but try them again then they function , I,m sure build 2 will be better - Thanks so much for your amazing work ..and on this last day of the YEAR I wish you all that's good in the new year to come ..Bless you Brother !!

Related

[ROM][P605/7T ONLY - lt03ltexx/tmo/vzw] Omni 20150202

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
What is Omni?
Omni Gerrit Review
Disclaimer
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.
*/
This is only for the P605/P607T (Qualcomm) variants only, due to the SM-P600 having an Exynos SoC
Full list of supported variants:
Code:
[CENTER]*P605 - lt03ltexx
*P605M
*P605S
*P605V - lt03ltevzw
*P607T - lt03ltetmo[/CENTER]
ROM:
4.4.4 - omni-4.4.4-20150220-lt03lte-HOMEMADE.zip
5.1.1 (not stable for daily use) - https://www.androidfilehost.com/?fid=23991606952595910
Gapps: Whatever you can find. I personally use Banks Gapps
Omni only supports TWRP recovery, use any alternate recovery at your own risk.
Source
OmniROM Source
Kernel Source
XDA:DevDB Information
Omni for Galaxy Note 10.1 (2014), ROM for the Samsung Galaxy Note 10.1 (2014 Edition)
Contributors
jakew02, xplodwild
Source Code: https://www.github.com/omnirom/
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.4.x
Version Information
Status: Alpha
Created 2014-10-27
Last Updated 2015-05-04

Important Notes
Omni does NOT provide root by default. You MUST flash SuperSU in recovery for any type of root
Please direct QUESTIONS to the Q&A Thread (link at top) and DEVELOPMENT + BUG REPORTS, WITH APPROPRIATE LOGS here
Kitkat Version ONLY:
The Menu hardware key lights up as the notification led
The Back hardware key is the charging indicator

Reserved

A-w-e-s-o-m-e.

That's very interesting. I always wanted to try a stock or rather google inspired rom in my Note but was never given the chance. Your download links are down though, overloading my anticipation
edit: You write "all variants download here". Do you mean that you support both P600, P601 and P605?

Stevethegreat said:
That's very interesting. I always wanted to try a stock or rather google inspired rom in my Note but was never given the chance. Your download links are down though, overloading my anticipation
edit: You write "all variants download here". Do you mean that you support both P600, P601 and P605?
Click to expand...
Click to collapse
My server is currently down. I have the file locally, I am in the process of uploading to a temporary mirror as I type this.
This is ONLY for P605/P607T variants, I have updated the OP with a full list of the supported models.
OP Updated with a temporary mirror
Update:
Next beta will have reworked device trees and additional cpufreq features and updates

Gunna go pick up this tab today when tmobile opens will let you know how it went

Toneman07 said:
Gunna go pick up this tab today when tmobile opens will let you know how it went
Click to expand...
Click to collapse
I was able to root using towelroot and install twrp with TWRP Manager from jmz (a personal friend) before I left the T-Mobile parking lot :good:

jakew02 said:
I was able to root using towelroot and install twrp with TWRP Manager from jmz (a personal friend) before I left the T-Mobile parking lot :good:
Click to expand...
Click to collapse
Cool stuff just got back with mine installed twrp through odin and used SuperSU zip to root. Just downloaded and about to flash. Wanted to get a preloaded recovery first with all my normal apps. Thanks for the Rom look forward to it!
Everything is up and running. I had issues getting SuperSu - ended up having to reflash that through TWRP. The only thing i have noticed so far is the inability to take screenshots. I might be missing something - but i believe the only way was to hold down the button and touch the screen. Once i finish setting up i will check if the phone is even responding to spen button

Came across an interesting error couldn't use hangouts dialer to video call. Grant it I didn't test it on stock it worked on the tab 4 I had its not a necessity I was just trying to break things lol

Screenshot is volume down + power
Screen record is volume up + power
I know about the hangouts problem. Also I know that headphones don't work. I will fix it next chance I get. My professors are laying the papers and assignments on hard this past week (its the same thing I had to do for the note 3)
Also if you read the OP 2nd post you would see that I specifically stated that Omni does NOT include root or su binary by default.
Some good info:
A great tool for this is the app Syslog from the play store. If you have a bug, simply open the app and select the type of logs to collect. Just keep in mind that the logs must be collected after the bug and before a reboot (unless you're getting logs for a random reboot, in which case you would collect a last_kmsg). This app makes collecting logs as easy as its ever been :good:

jakew02 said:
Screenshot is volume down + power
Screen record is volume up + power
I know about the hangouts problem. Also I know that headphones don't work. I will fix it next chance I get. My professors are laying the papers and assignments on hard this past week (its the same thing I had to do for the note 3)
Also if you read the OP 2nd post you would see that I specifically stated that Omni does NOT include root or su binary by default.
Some good info:
A great tool for this is the app Syslog from the play store. If you have a bug, simply open the app and select the type of logs to collect. Just keep in mind that the logs must be collected after the bug and before a reboot (unless you're getting logs for a random reboot, in which case you would collect a last_kmsg). This app makes collecting logs as easy as its ever been :good:
Click to expand...
Click to collapse
Thanks for the info
I wanted to clarify on the supersu I originally flashed it with the rom and gaps first and it didn't take took a second flash to get it to work. As is its great for a daily thanks for the great work

Toneman07 said:
Thanks for the info
I wanted to clarify on the supersu I originally flashed it with the rom and gaps first and it didn't take took a second flash to get it to work. As is its great for a daily thanks for the great work
Click to expand...
Click to collapse
Ah, I see. For Omni, SuperSU was integrated into Settings if it's installed, there won't be an icon in the app drawer.
Tap Build Number a few times to enable Developer Options and you should see SuperSU above About Phone in settings :good:

Hello, i used the rom for 4 hours now on art runtime and sometimes the screen doesn't wake up/device is very laggy four 1 minute.... But the rest of the rom is fine i like it and i'm happy about your development

LukLak19 said:
Hello, i used the rom for 4 hours now on art runtime and sometimes the screen doesn't wake up/device is very laggy four 1 minute.... But the rest of the rom is fine i like it and i'm happy about your development
Click to expand...
Click to collapse
Dont use ART. Its not supported by Google and therefore isn't support by Omni, and therefore not by me either. CM has hacked up some stuff to make ART work but Omni isn't doing that.
Best results will be with dalvik and stock kernel
I've been using it on campus for the past few days to take notes during class and write papers and haven't had any issues.

I just saw that you uploaded an update. Could you provide a changelog, since the changelog page shows an error (Error: SQLSTATE[HY000] [2002] Can't connect to local MySQL server through socket '/var/lib/mysql/mysql.sock' (2)) ?
I know now why, because it doesn't boot atleast for me.

OberstGrausam said:
I just saw that you uploaded an update. Could you provide a changelog, since the changelog page shows an error (Error: SQLSTATE[HY000] [2002] Can't connect to local MySQL server through socket '/var/lib/mysql/mysql.sock' (2)) ?
I know now why, because it doesn't boot atleast for me.
Click to expand...
Click to collapse
A good rule of thumb: don't flash things i don't link to from the OP. :good:

Hi rom devloper
i was wondering if u could support the p600 for ur omni rom. Also, is it possible if i install the p605 rom on my p600 it will work.. i know that is the case for some roms.
thanx in advance

Shawn5162 said:
i was wondering if u could support the p600 for ur omni rom. Also, is it possible if i install the p605 rom on my p600 it will work.. i know that is the case for some roms.
thanx in advance
Click to expand...
Click to collapse
P600 is the QUALCOMM wifi-only variant, correct? If it is QUALCOMM then I can certainly look into it. Shouldn't be much more difficult than just removing the telephony and ril stuff
If it is Exynos there is no way.

The p600 is exynos but but I do know that many p605 roms work flawlessly on the p600... could u please try to support the p600
Thank so much for trying to help

[SFOS] [EXPERIMENTAL}SailfishOS 2.0.2.48 for Redmi 2

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The Alpha release was experimental and was not meant for the general public, but still recieved an overwhelming response. This new Beta version is free of most bugs encountered earlier and is suitable for everyone to get a taste of SailfishOS on their phone.
Read the installation instructions carefully.
Changelog from Alpha -->
* Bluetooth fixed.
* Audio now works out of the box.
* Camera Resolutions updated.
* Flash now works in Camera.
* Settings app now shows settings for cellular networks.
* FM-Radio now supported. ( Highly Experimental. Read the FM-Radio section below )
* Stand-by time vastly improved.
* Basic Jolla apps are now pre-installed. ( Before anyone talks about bloatware, you got the option to uninstall them)
* Warehouse, the community appstore is now pre installed.
Sailfish OS’s heritage lies in Nokia times, especially in the MeeGo operating system. Prior to 2011 Nokia and Intel had a vision of an open mobile operating system. Together they invested around 1 billion USD to the project and created an open source based operating system called MeeGo, which was used as a basis for several devices, such as the iconic Nokia N9. Although the Nokia N9 became the beacon of open source operating systems, Nokia decided to end the project and chose instead to continue with Microsoft’s Windows Phone OS. The rest of that is another story.
For more information about SailfishOS click here.
SailfishOS has now been successfully ported to Redmi 2 and here I am sharing the steps to install it on your phone.
Code:
Disclaimer: Your warranty is now void. You will lose all your data on your phone and may render it unusable. This software is provided as is without any warranty of any kind whatsoever. The user shall solely be reponsible for any consequence arising out of following this guide. I, or anyone else shall not be held responsible for bricked devices, dead sd-cards, thermonuclear war, you getting fired because the alarm app failed or any other consequence of following this guide. The linked zip contains some proprietary files.
tl;dr I wont be held responsible for any unfortunate incidence.
Prerequisites -->
1) Latest TWRP recovery installed (Others may work too but I haven't tested). You can get it here-->http://forum.xda-developers.com/redmi-2/development/recovery-recovery-built-source-inside-t3277621
*Note that the Cyanogenmod version is now changed.
2) cm-12.1-20160318-UNOFFICIAL-wt88047 zip by kumajaya. You can get it from his google drive link here--> http://forum.xda-developers.com/redmi-2/development/rom-cyanogenmod-unofficial-builds-t3200883
3) SailfishOS zip file. Download link given below.
This is not an Android ROM and thus the instructions to install are quiet different. Follow them carefully.
1) Boot to recovery. Wipe cache, dalvik-cache, system and data.
2) Copy the Downloaded files to the sdcard via USB.
3) Install cm-12.1-20160318-UNOFFICIAL-wt88047. Do NOT reboot after installing.
4) Install SailfishOS zip file. The installation will take around 10 minutes so don't think that its stuck. Ignore any errors about being unable to mount data partition.
5) Reboot System when installation succeeds.
Notes-->
1) This is not an Android ROM. Android apps will not work right now. But a way for Android apps to work is available but will take quiet some time before it gets on our device.
2) Root access (using devel-su in terminal) requires a password which can be set in Settings>Developer Options.
3) For advanced users, you can ssh into the device after setting a password in Developer options using ssh [email protected] over USB.
4) Do not register for a Jolla account. You will get an error about failed IMEI registration. This will be fixed as soon as Jolla allows ported devices to be registered.
5) The Store will not work. It needs a Jolla account. You can however use the openrepos warehouse for installing apps.
6) MTP over USB does not work.
7) Battery drains faster if screen is ON. Better than alpha but still needs improvement.
FM-Radio -->
You can play FM-Radio now but it is experimental.
Plug in your headphones and launch the PirateFM app for radio.
if it won't start, open terminal and use "harbour-piratefm" to start it.
Once the app starts, it should show a frequency. If its stuck at 0.0 MHz, then close the app(close, not minimise) and restart it again.It should show a frequency now. If you have echoing audio in the headphones, i.e. you hear your own voice in the headphones, then open terminal and " systemctl restart --user pulseaudio" and then try running the app again.
FM will not work through the speakers, and it also cannot be muted.
Download Link -->
The file has been named as alpha-2 because that is how it was initially intended but it would be better to designate this as beta since its almost stable.
https://www.androidfilehost.com/?fid=24591020540823211
DO NOT SHARE MY WORK WITHOUT MY EXPLICIT PERMISSION. IF YOU ARE SHARING, LINK TO THIS POST.
XDA:DevDB Information
SailfishOS 2.0.2.48, ROM for the Xiaomi Redmi 2
Contributors
adeen-s, @mal- @sledges @kimmoli @Stskeeps @spiiroin @Litew @jusa_ @ketut.kumajaya
Source Code: https://github.com/adeen-s/droid-config-wt88047 ; https://github.com/adeen-s/droid-hal-version-wt88047 ; https://github.com/adeen-s/hybris-boot/ ; https://github.com/adeen-s/droid-hal-wt88047 ; https://github.com/adeen-s/android_kernel_cyanogen_msm8916 ;
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Must not have flashed lollipop MIUI update.
Based On: SailfishOS
Version Information
Status: Testing
Current Beta Version: 1
Beta Release Date: 2016-06-30
Created 2016-06-30
Last Updated 2016-09-17

Reserved
For Android app compatibility, I need help from someone with significant experience in compiling cyanogenmod. PM me.

Reserved
Warning : This procedure will wipe all data on your device.
MultiROM thread--> http://forum.xda-developers.com/redmi-2/development/mod-multirom-v33-t3381373
MultiROM Instructions -->
1) Get the modified twrp and multirom zip from the multirom thread.
2) Reboot to recovery, select Install, select install image, choose the modified twrp and flash it to recovery partition.
3) Reboot recovery. It should now boot up to the modified TWRP.
4) Wipe Data,System,Cache and Dalvik-Cache.
5) Select Install from Recovery main menu. Select cm-12.1-20160318 zip. uncheck all options and install it.
6) Again Select Install from Recovery main menu. Select SailfishOS zip file and uncheck all options and install it.
7) Select MultiROM settings ( small button on top right corner in main menu of recovery). Select inject current boot sector. Reboot or install secondary ROM of your choice now.
8) For adding Secondary ROMs of your choice, refer to the MultiROM thread.

I tried the first, alpha build, it was really really good, but can you please tell me how to install it as a secondary ROM havin it's own kernel via multiboot, as I was really tires of switching kernels everytime I had to switch between CM13 and SailFish.
I hope it's possible.
.
Also, will it not work with the latest, Lolipop Bootloader? (As i can make out from the "Required Firmware" section from OP)

shanx_verma said:
I tried the first, alpha build, it was really really good, but can you please tell me how to install it as a secondary ROM havin it's own kernel via multiboot, as I was really tires of switching kernels everytime I had to switch between CM13 and SailFish.
I hope it's possible.
.
Also, will it not work with the latest, Lolipop Bootloader? (As i can make out from the "Required Firmware" section from OP)
Click to expand...
Click to collapse
Since the base cyanogenmod will not work with the lollipop bootloader, it cannot be done. Sailfish will work if a way to run the base cm over the lollipop bootloader is found.
As for the multiboot, I haven't tried it yet but take a look at this http://forum.xda-developers.com/showpost.php?p=67519570&postcount=62 although it was already addressed to you.

@adeen-s well as per the updated devolvement for wt88047, CM now supports Lollipop bootloader. Can you please guide us through the process of having SFOS as secondary? Is it like installing any other secondaries?

@adeen-s can you change base sfos to cm13
Sent from my 2014817 using Tapatalk

NeoDarkness said:
@adeen-s can you change base sfos to cm13
AFAIK Sailfish OS 2.0 Can only run over CM 10.x 11.x 12.1.
Source- Sailfish OS Hardware Adaptation Development Kit
Click to expand...
Click to collapse

iamsubhranil said:
@adeen-s well as per the updated devolvement for wt88047, CM now supports Lollipop bootloader. Can you please guide us through the process of having SFOS as secondary? Is it like installing any other secondaries?
Click to expand...
Click to collapse
CM-12.1 still does not.

SF.OS doesn't work with LP BootLoader. Thanks for the Info.
adeen-s said:
CM-12.1 still does not.
Click to expand...
Click to collapse
Oh, and there I was, wondering why my SFOS wasn't booting on LP Bootloader.

wow sailfish os enters beta
What are remaining issue items? battery drain fixed?

Bugs
Hi, i love this os and hope android apps support is coming soon.
the bugs that i found is the music player seem to show the same mp3 file as 2 different file but one with correct duration and the other one is zero.
for problems, the battery draining quite fast :crying:
thank you for your hard work dev!!!

@adeen-s that means if i flash the rom as secondary having k loader, it'll work?

@adeen-s What a beautiful typographical OS with fluent transitions. Been using it with MultiROM keeping my previous primary RR 5.7.1 as secondary. Everything is pretty good on my side. Just animations are quite unfluent sometimes. And some USSD codes aren't showing when dialed. Like *143*0# and *400# on Aircel(404 91).

Using it, wow!
iamsubhranil said:
@adeen-s What a beautiful typographical OS with fluent transitions. Been using it with MultiROM keeping my previous primary RR 5.7.1 as secondary. Everything is pretty good on my side. Just animations are quite unfluent sometimes. And some USSD codes aren't showing when dialed. Like *143*0# and *400# on Aircel(404 91).
Click to expand...
Click to collapse
How did you return to the KK bootloader, buddy?

iamsubhranil said:
@adeen-s that means if i flash the rom as secondary having k loader, it'll work?
Click to expand...
Click to collapse
Not sure. I tried it once and it didn't work. It may need a workaround to work as secondary.

shanx_verma said:
How did you return to the KK bootloader, buddy?
Click to expand...
Click to collapse
I had backed it up using twrp. Just restored Firmware. U flash any miui kk fastboot
---------- Post added at 04:32 PM ---------- Previous post was at 04:31 PM ----------
adeen-s said:
Not sure. I tried it once and it didn't work. It may need a workaround to work as secondary.
Click to expand...
Click to collapse
Yup MR showed some errors about not founding fstab

Here's some screenshots
Hey guys. It's wonderful!

iamsubhranil said:
Hey guys. It's wonderful!
Click to expand...
Click to collapse
Thanks for the screenshots. I'm glad to know you liked it.

iamsubhranil said:
I had backed it up using twrp. Just restored Firmware. U flash any miui kk fastboot
Yup MR showed some errors about not founding fstab
Click to expand...
Click to collapse
Okay, I have the firmware partition backed up. What all will it restore - will it restore the KK modem as well? (cuz I don't want KK modem, just the bootloader).

[RECOVERY][OFFICIAL] TWRP 3.5.2_9-0 [I9190][I9192][I9195][L520]

Reserved
CHANGELOG
3.2.1-1
* Restored compatibility with SD cards formatted in exFAT.
3.2.1-2
* Restored preload partition being visible when creating a backup.

Reserved

Your member of the TWRP Team ?.
It is nice to see that we have now an official TWRP.
Does new Build also support arco68 unofficial LOS 15.1 Version ?

Thanks @ripee !
Maybe you could link the the materialized theme in the OP : https://forum.xda-developers.com/android/themes/theme-twrp-materialised-dark-light-play-t2915584
Clean design with a bunch of extra tools / options to enhance TWRP, this is really useful and handy ?
Sent from my S4 Mini using XDA Labs

lars85destroyer said:
Thanks @ripee !
Maybe you could link the the materialized theme in the OP : https://forum.xda-developers.com/android/themes/theme-twrp-materialised-dark-light-play-t2915584
Clean design with a bunch of extra tools / options to enhance TWRP, this is really useful and handy
Sent from my S4 Mini using XDA Labs
Click to expand...
Click to collapse
Ok sure

ripee said:
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.4.x
Click to expand...
Click to collapse
Thanks but seeing that Nougat version, will it work on a regular KitKat stock ROM ?
If not, which other version of TWRP should I use for an I9195 ?

TheRealKeyserSoze said:
Thanks but seeing that Nougat version, will it work on a regular KitKat stock ROM ?
If not, which other version of TWRP should I use for an I9195 ?
Click to expand...
Click to collapse
I have no reason to believe that 3.2.1-0 wouldn't work with stock KitKat. Just remember to pull the battery as soon as your phone vibrates after the flash finishes or else your stock rom could quickly re-flash its own stock recovery.
Please report feedback if you get it to work or not

That worked a treat!
Flawless flashing followed by installing root from TWRP.
Thanks a lot!

Been waiting on this...

Thank you for your job, but on my i9195 I had troubles with this release. Often it doesn't recognize my 32GB sdcard (it seems to be empty), instead of 3.2.0-1 that works as usual, also with oreo. Maybe I forgot to mount the microsd? But it's strnge, I've never mounted the microsd on previous versions.

Please include the exfat Samsung kernel driver:
https://forum.xda-developers.com/showpost.php?p=75650598&postcount=1638
sacharja said:
Indeed, however there seems to be a solution for Samsung products at least: https://github.com/bkuhn/exfat . Maybe ne0zone75 included this, but the TWRP guys don't use any Samsung device specific drivers.
Click to expand...
Click to collapse
I had the same issues with my SD

Dead here?

fankool said:
Thank you for your job, but on my i9195 I had troubles with this release. Often it doesn't recognize my 32GB sdcard (it seems to be empty), instead of 3.2.0-1 that works as usual, also with oreo. Maybe I forgot to mount the microsd? But it's strnge, I've never mounted the microsd on previous versions.
Click to expand...
Click to collapse
sacharja said:
Please include the exfat Samsung kernel driver:
https://forum.xda-developers.com/showpost.php?p=75650598&postcount=1638
I had the same issues with my SD
Click to expand...
Click to collapse
This has less to do with the exFAT driver and more to do with a missing TWRP flag in my device tree. I'll look into it.
What file format is your SD card in? Please try FAT32, exFAT, and NTFS so we can cover these most frequent possibilities.
sacharja said:
Dead here?
Click to expand...
Click to collapse
Users are used to ne0z0ne's unofficial builds perhaps.

sacharja said:
Please include the exfat Samsung kernel driver:
https://forum.xda-developers.com/showpost.php?p=75650598&postcount=1638
I had the same issues with my SD
Click to expand...
Click to collapse
I remember a similar problem with my TWRP build for the big S4, which I fixed by removing the following line from the BoardConfig.mk file:
Code:
TW_NO_EXFAT_FUSE := true
GT-I9190
twrp-3.2.1-1-serrano3gxx.img
twrp-3.2.1-1-serrano3gxx.tar
GT-I9192
twrp-3.2.1-1-serranodsdd.img
twrp-3.2.1-1-serranodsdd.tar
GT-I9195
twrp-3.2.1-1-serranoltexx.img
twrp-3.2.1-1-serranoltexx.tar

ripee said:
What file format is your SD card in? Please try FAT32, exFAT, and NTFS so we can cover these most frequent possibilities.
Click to expand...
Click to collapse
I'm not 100% sure but I remember last time I formatted using exfat
---------- Post added at 21:55 ---------- Previous post was at 21:31 ----------
GT-I9195
twrp-3.2.1-1-serranoltexx.img
twrp-3.2.1-1-serranoltexx.tar[/QUOTE]
Worked! Just booted in recovery and tried to open sdcard from file manager and I saw the files stored. Thank you.

fankool said:
I'm not 100% sure but I remember last time I formatted using exfat
---------- Post added at 21:55 ---------- Previous post was at 21:31 ----------
GT-I9195
twrp-3.2.1-1-serranoltexx.img
twrp-3.2.1-1-serranoltexx.tar
Click to expand...
Click to collapse
Worked! Just booted in recovery and tried to open sdcard from file manager and I saw the files stored. Thank you.[/QUOTE]
Fantastic! Thanks very much for your feedback! I'll update the official repo and ask TeamWin to compile official 3.2.1-1 builds.

Cool, it also worked for me now with the exfat SD (NTFS is of course working too).
Great job ripee, many thanks for your good work

@ripee
Hi this is the first time i want to install twrp on s4 mini lte version. By odin. But i do not boot in twrp. Always stock recovery.
What am i doing wrong ?

djbosanac said:
@ripee
Hi this is the first time i want to install twrp on s4 mini lte version. By odin. But i do not boot in twrp. Always stock recovery.
What am i doing wrong ?
Click to expand...
Click to collapse
If you have stock installed, you have to very quickly pull the battery as soon as your phone vibrates when Odin says PASSED! The stock rom is very sneaky because, if you don't pull the battery, it will re-flash its own stock recovery before rebooting into system.

[DISCONTINUED][ROM][2017-11-30][7.1.2][ZC554KL] Lineage OS 14.1

Working? Can you install it?

MJS_Luthier said:
Working? Can you install it?
Click to expand...
Click to collapse
This time? Of course not. I didn't have the phone anymore. Earlier? Yes I've built it so this can be booted on ZC554KL.

aaaaaaziskurnia said:
This time? Of course not. I didn't have the phone anymore. Earlier? Yes I've built it so this can be booted on ZC554KL.
Click to expand...
Click to collapse
Thank you, was going to buy this phone and it's great it's already got custom recovery/rom

I flashed it it works

Anything Work! Many Thanks :good::laugh:

oakob168 said:
Anything Work! Many Thanks :good::laugh:
Click to expand...
Click to collapse
Hi
how you unlock boot-loader your phone
i used asus app unlocker and app unlock boot loader but after reboot phone, boot-loader again lock.
i try to flash twrp and can to install but screen is black after boot up to recovery MOD: after unlock boot-loader by app and when phone go to boot-loader i don't reboot phone and flash twrp by ADB on commond line write flash is OK but when i change reboot to recovery by volume key and press power key to go to recovery, phone reboot and boot up with black screen and never boot to recovery and boot-loader again locked
please help me i really need to unlock my device and root my phone.

Is it possible to establish LineageOS with the help of TWRP
Is it possible to establish LineageOS with the help of TWRP ???

Zeroservice said:
I flashed it it works
Click to expand...
Click to collapse
Can you describe in more detail how it works?

oakob168 said:
Anything Work! Many Thanks :good::laugh:
Click to expand...
Click to collapse
Kindly tell the instruction how to flash it!

please port lineage 15.1

Lineage OS update
I rebuild Lineage with aaaaaaziskurnia's code to include the latest security updates for android.
Disclaimer
Your warranty is void.
I am not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this ROM
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at me for messing up your device, I will laugh at you.
Click to expand...
Click to collapse
Build information
Build date: 2018-10-03
Build on: Lubuntu 16.04 LTS VM
Patch version of this build: 2018-09-05
For ZC554KL 3GB Ram, 32GB EMMC, Snapdragon 430 (MSM8937) (won't work properly on the model with 4GB RAM and 32GB EMMC)
I tested this image on my phone (X00ID) today. Here are the results:
Working (tested so far)
- Boot
- Audio
- Video
- All cameras and flashlights
- Wifi connection
- Mobile connection
- LED
- MTP
- OTG
Not working
- If you (or a root app) remount the system partition as rw and tries to modify a system file --> android freezes (hold volume down and power until the smartphone vibrates to reboot in that case)
- Gestures (the build in Focaltech 5436 touch-controller supports gestures)
Modifications
- Root Add on is already integrated (to build with integrated SU Addon: "export WITH_SU=true" before building)
Warning
Before flashing this, make a backup! I don't tested what happens, if you update aaaaaaziskurnia's version with this image (I made a clean flash).
Note:
In case of freeze: Hold Volume down + Power until the Zenfone 4 Max reboots.
Developer:
Current:
Bug: Root Remount RW Freeze - State: Gived up. I can't fix that
History:
Bug: Double-tap to wake - State: Fixed (Kernel-Commit, Device-Commit, Build lineage-14.1-20180515-UNOFFICIAL-X00I.zip)
Download
lineage-14.1-20180507-UNOFFICIAL-X00I.zip
lineage-14.1-20180515-UNOFFICIAL-X00I.zip
lineage-14.1-20180602-UNOFFICIAL-X00I.zip
lineage-14.1-20180707-UNOFFICIAL-X00I.zip
lineage-14.1-20181003-UNOFFICIAL-X00I.zip
Sources:
Kernel
Device
Vendor
Local Manifest
Lineage

Voldracarno said:
I rebuild Lineage with aaaaaaziskurnia's code to include the latest security updates for android.
Build information
Build date: 2018-05-07
Build on: Lubuntu 16.04 LTS VM
Patch version of this build: 2018-04-05
Used Manifest for this build: https://gist.github.com/ThaFireDragonOfDeath/01f67371bd6756866e243662a5ff48fa
I tested this image on my phone (X00ID) today. Here are the results:
Working (tested so far)
- Boot
- Audio
- Video
- All cameras and flashlights
- Wifi connection
- Mobile connection
- LED
- MTP
Not working
- Double tap to wake
Modifications
- Root Add on is already integrated
Warning
Before flashing this, make a backup! I don't tested what happens, if you update aaaaaaziskurnia's version with this image (I made a clean flash).
Download
Flashable zip archive: https://drive.google.com/open?id=1GcCLAzqBx4MoZ2Dj7oy8jeigCtA91vWT
I will build a new version every two weeks and if I have time, i will update the kernel sources, vendor files etc.
Click to expand...
Click to collapse
Do you have 2/16 or 3/32?

Johann Richter said:
Do you have 2/16 or 3/32?
Click to expand...
Click to collapse
3/32. X00I and X00ID are the same (TWRP/Lineage for X00I works also on X00ID).

Voldracarno said:
3/32. X00I and X00ID are the same (TWRP/Lineage for X00I works also on X00ID).
Click to expand...
Click to collapse
I have ZC554KL MSM8917 2/16, on the forum 4PDA people write that installing this firmware will turn out brick! I just wanted to make sure I get on my phone?

Johann Richter said:
I have ZC554KL MSM8917 2/16, on the forum 4PDA people write that installing this firmware will turn out brick! I just wanted to make sure I get on my phone?
Click to expand...
Click to collapse
Oh, I didn't know, that there is a version of the Zenfone 4 Max ZC554KL with 2/16 out there (seams to be a special version). This image is for the Snapdragon 430. The device you described have a Snapdragon 425.
So better don't install this image (I don't know if it working or not on your phone, I haven't that model so I can't test it).
Edit: Yup, your phone is a special model which I didn't know.
Your model: http://www.phonemore.com/asus-zenfone-4-max-zc554kl-2gb16gb/specs/3701
Model from mostly the rest of the world: http://www.phonemore.com/asus-zenfone-4-max-zc554kl-3gb32gb/specs/3702 or http://www.phonemore.com/asus-zenfone-4-max-pro-zc554kl-3gb32gb/specs/3703

I can't download lineage-14.1-20180515-UNOFFICIAL-X00I.zip

albarudin said:
I can't download lineage-14.1-20180515-UNOFFICIAL-X00I.zip
Click to expand...
Click to collapse
Fixed (I messed up the link permissions on Google Drive), the link should now work.

Voldracarno said:
Not working
- If you (or a root app) remount the system partition as rw and tries to modify a system file --> android freezes (hold volume down and power until the smartphone vibrates to reboot in that case)
- Gestures (the build in Focaltech 5436 touch-controller supports gestures)
Bug: Remount RW Freeze - State: Investigating
History:
Bug: Double-tap to wake - State: Fixed (Kernel-Commit, Device-Commit, Build lineage-14.1-20180515-UNOFFICIAL-X00I.zip)
Click to expand...
Click to collapse
I have the same problem with stock rom, my specific issue, I hate ads and I am trying to use "adaway", adaway has to modify the hosts file then it crashes and I need to reboot...
I tried to edit the permissions of the hosts file but it is impossible, the phone just crashes and doesn't allow me to modify files with RW in order to change anything (looks like we are not root at all).

Gonzalomay86 said:
I have the same problem with stock rom, my specific issue, I hate ads and I am trying to use "adaway", adaway has to modify the hosts file then it crashes and I need to reboot...
I tried to edit the permissions of the hosts file but it is impossible, the phone just crashes and doesn't allow me to modify files with RW in order to change anything (looks like we are not root at all).
Click to expand...
Click to collapse
For that case there is a workaround. Boot to TWRP and push the host file via adb to the system partition in the right path and set the permissions with chmod. If you mounting the the system partition as rw in the recovery the system don't crash.

[RECOVERY][UNOFFICIAL] TWRP for Galaxy S10 Lite (Snapdragon)

Changelog:
29.11.2021 - Update to TWRP 3.6.0
- Add Symlinked dynamic partitions to fstab
- Update multidisabler
- fstab clean up
03.03.2021 - Update to latest TWRP source
- Add terminal multidisabler script
- fstab cleanup.
01.01.2021 - Update TWRP to 3.5.0
- Fix fastbootd
- Builds for Q and R.
21.11.2020 - Initial Release.

Everything work perfect. Thank You

Great, thank you.

@afaneh92 you're here too lol

fbs said:
@afaneh92 you're here too lol
Click to expand...
Click to collapse
Yes, Im taking a rest from S5 lol.

Do all versions have snapdragons and is it free bootloader unlock? Im hoping it works the same for the G770U as the G770f right. Im looking at buying one and I have to have root and twrp lol

Moderator Information,
Thread has been cleaned. Selling unlock services through XDA is not allowed.

Stephen said:
Moderator Information,
Thread has been cleaned. Selling unlock services through XDA is not allowed.
Click to expand...
Click to collapse
How is it possible I dont understand if samsung doesnt allow it officially how does that work?

Nice work on the recovery. This phone is tits its just as fast as my S6 tablet. Which partitions should I back up? Im not sure theres so many It wont back up modem.

Techguy777 said:
Nice work on the recovery. This phone is tits its just as fast as my S6 tablet. Which partitions should I back up? Im not sure theres so many It wont back up modem.
Click to expand...
Click to collapse
I though you wont do unlock your device lol.

Never mind it will back it up if I just backup modem by itself. What are the main ones for bootloops? Im guessing data, boot, super img with all the partitions inside.
The way I rooted was unlocked bootloader, flashed the dbmeta dummy file, had magisk canary on a ssd drive with the twrp and samsung disabler. After I flashed twrp I boot into recovery flashed the disabler and formate data yes and than I just flash magisk v21.1 zip and rebooted. Now I have check adb apps unchecked in developer options as migrate says his app works better that way so I dont know if it made a difference or not.

afaneh92 said:
I though you wont do unlock your device lol.
Click to expand...
Click to collapse
I did the easy way. Im a broke bum it was a gift I dont have a 150 dollars so I went with the 770f model. If I had to I would have.

What we need now is a permissive kernel.

Techguy777 said:
What we need now is a permissive kernel.
Click to expand...
Click to collapse
You can use the kernel in TWRP its permissive. I dont have free time to support kernels. but you can build it yourself.
GitHub - mohammad92/android_kernel_samsung_r5q: Kernel source for the Samsung Galaxy S10 Lite (Snapdragon)
Kernel source for the Samsung Galaxy S10 Lite (Snapdragon) - GitHub - mohammad92/android_kernel_samsung_r5q: Kernel source for the Samsung Galaxy S10 Lite (Snapdragon)
github.com
there is a build menu, easy way.

afaneh92 said:
You can use the kernel in TWRP its permissive. I dont have free time to support kernels. but you can build it yourself.
GitHub - mohammad92/android_kernel_samsung_r5q: Kernel source for the Samsung Galaxy S10 Lite (Snapdragon)
Kernel source for the Samsung Galaxy S10 Lite (Snapdragon) - GitHub - mohammad92/android_kernel_samsung_r5q: Kernel source for the Samsung Galaxy S10 Lite (Snapdragon)
github.com
there is a build menu, easy way.
Click to expand...
Click to collapse
I know I was thinking of trying it, ive built Lineage and a couple of roms for the S2 tablet, Nexus 6, and Ive tried twrp but never kernel. I have my build environment setup on ubuntu 14 on another hard drive but I have a cheap TLC hdmi tv and the resolution messed up and now everything is out of view and I can't even afford a 100 used monitor so its been put on hold for 2 years now.
When you restore a backup which partitions do you restore?

Techguy777 said:
I know I was thinking of trying it, ive built Lineage and a couple of roms for the S2 tablet, Nexus 6, and Ive tried twrp but never kernel. I have my build environment setup on ubuntu 14 on another hard drive but I have a cheap TLC hdmi tv and the resolution messed up and now everything is out of view and I can't even afford a 100 used monitor so its been put on hold for 2 years now.
When you restore a backup which partitions do you restore?
Click to expand...
Click to collapse
all but read only, which is modem.

afaneh92 said:
all but read only, which is modem.
Click to expand...
Click to collapse
I was looking into twrp wipe and it doesn't show system? So how do I flash lineage. Its weird because everything is different and I can't find instructions of all of it anywhere note in the note 20 twrp page nowhere.

afaneh92 said:
all but read only, which is modem.
Click to expand...
Click to collapse
Hey android 11 one ui 3.0 just dropped for the s10 lite.

Techguy777 said:
Hey android 11 one ui 3.0 just dropped for the s10 lite.
Click to expand...
Click to collapse
Yes I know long time ago, cant update twrp until we got kernel source.

Techguy777 said:
I was looking into twrp wipe and it doesn't show system? So how do I flash lineage. Its weird because everything is different and I can't find instructions of all of it anywhere note in the note 20 twrp page nowhere.
Click to expand...
Click to collapse
There no system wipe, this is dynamic partition device. System, vendor, product and odm are part of super partition. Do some search.

Better Mobile App

welcome