Hey, i am from india bought oneplus 9R 12+256gb varient.
How can i root it(magisk) ?
Same as any other oneplus.
Download and Extract latest stock rom and get the boot.img, download and install magisk , from there choose extracted boot.img to patch in magisk, follow the instructions and done.
Note: SINCE, THIS IS NEW MODEL AND THERE IS LOT LESS OPTIONS , AND INSTRUCTION LEFT TO REVIVE FROM BRICK, I WOULD NOT HURRY TO TRY IT. DO AT YOUR OWN RISK AND I' M HELL NO RESPONSIBLE IF YOU BRICK YOUR DEVICE
CcrShakya said:
Download and Extract latest stock rom and get the boot.img, download and install magisk , from there choose extracted boot.img to patch in magisk, follow the instructions and done.
Note: SINCE, THIS IS NEW MODEL AND THERE IS LOT LESS OPTIONS , AND INSTRUCTION LEFT TO REVIVE FROM BRICK, I WOULD NOT HURRY TO TRY IT. DO AT YOUR OWN RISK AND I' M HELL NO RESPONSIBLE IF YOU BRICK YOUR DEVICE
Click to expand...
Click to collapse
Thanks, ill wait too
dRexter_0 said:
Thanks, ill wait too
Click to expand...
Click to collapse
Actually there is already available msm download tools for our device you can root it if you want
CcrShakya said:
Actually there is already available msm download tools for our device you can root it if you want
Click to expand...
Click to collapse
If something wrong happens you can recover it from msm download tools
how to root using msm download tools ? i have the 9r 12gb indian global. i would to get rid of the red cable club
xenmry said:
how to root using msm download tools ? i have the 9r 12gb indian global. i would to get rid of the red cable club
Click to expand...
Click to collapse
Unlock bootloader, flash twrp, flash magisk. Done
: )
dRexter_0 said:
Unlock bootloader, flash twrp, flash magisk. Done
: )
Click to expand...
Click to collapse
How ???
Related
Hello,
Here is a guide for anyone that wants to keep root with SafetyNet verified on Huawei P10 and P10+, also here you will find how to install/update P10 and P10+ firmware.
REQUIREMENTS
- Unlocked Bootloader(BEFORE&AFTER YOU INSTALL FIRMWARE)
- TWRP recovery for P10(AFTER INSTALLING FIRMWARE) : https://.xda-.com/p10/development/testers-twrp-t3585256
- Make a back up of system,products,vendor,boot,etc. in twrp(optional,but recommended)
Now,the steps :
1. Install your stock firmware(or update) : http://www.stechguide.com/?s=huawei+p10 (read the steps in there carefully and see if your build number matches the one on the site!)
STEP 1 IS NOT NEEDED IF YOU NEVER TRIED TO ROOT YOUR P10!
2. After you installed your desired firmware go ahead and unlock bootloader again(this will factory reset your device)and install TWRP recovery.
3. Download Magisk v12,Magisk Manager and uninstaller and flash Magisk v12 with TWRP and then install Magisk Manager.
Magisk v12: https://forum.xda-developers.com/attachment.php?attachmentid=4095052&d=1490916845
Magisk manager for v12: http://www.apkmirror.com/apk/topjoh...se/magisk-manager-4-3-3-android-apk-download/
UPDATED :
I found a way to install v13 on p10,p10 plus,not sure if p10 lite also :
Go in magisk manager(magisk v12) and check the "Keep force encryption" and "Keep dm-verity" boxes,and then press install/update (if this doesnt work),download a terminal emulator(https://play.google.com/store/apps/details?id=jackpal.androidterm&hl=en) and type this :
Code:
su
echo KEEPVERITY=true>>/data/.magisk
echo KEEPFORCEENCRYPT=true>>/data/.magisk
Thank you ! Finally I learned to debrand hoping viper4android will work with magisk.
juntulis said:
Thank you ! Finally I learned to debrand hoping viper4android will work with magisk.
Click to expand...
Click to collapse
Yeah, forgot to mention that you can debrand too with this. Np
Viper4android won't work because you need to enable core mode on Magisk(that means no mods will be loaded)
then how to make v4a to work?
wait for the stable v13 magisk
Hello,
Actually I have a P10 with build number : VTR-L09C530B122, could I follow the guide with the Huawei P10 B153 Nougat Update [Europe] ?
Thanks for the reply
christrodr said:
Hello,
Actually I have a P10 with build number : VTR-L09C530B122, could I follow the guide with the Huawei P10 B153 Nougat Update [Europe] ?
Thanks for the reply
Click to expand...
Click to collapse
That means to rebrand to C432, if you wish to do that you can.
MusicHeat said:
That means to rebrand to C432, if you wish to do that you can.
Click to expand...
Click to collapse
Thank you,
By rebranding, I suppose you mean to change the operator on the phone or I'm wrong ?
christrodr said:
Thank you,
By rebranding, I suppose you mean to change the operator on the phone or I'm wrong ?
Click to expand...
Click to collapse
Yes
MusicHeat said:
Yes
Click to expand...
Click to collapse
Is the C432 an unbranded one ?
MusicHeat said:
Yes
Click to expand...
Click to collapse
Let me know if you are going to rebrand
christrodr said:
Is the C432 an unbranded one ?
Click to expand...
Click to collapse
Either orange, either unbranded don't know for sure
MusicHeat said:
Either orange, either unbranded don't know for sure
Click to expand...
Click to collapse
So to be sure I have to do nothing...
Thank you.
christrodr said:
So to be sure I have to do nothing...
Thank you.
Click to expand...
Click to collapse
You can use another method to stay on the same brand.
MusicHeat said:
NEVER REBOOT YOUR PHONE WITH MAGISK HIDE ENABLED,IT WOULD BE IMPOSSIBLE TO UNLOCK YOUR DEVICE WITHOUT FORMATTING DATA THROUGH TWRP!!!
Click to expand...
Click to collapse
Can you explain why this does not work? (is only a P10 problem right?)
I gave up on TWRP/Magisk on my P10 Plus because of this
I never figured out why, but guessed it had to do with the encryption of the data partition
I was going to look at it again once TWRP could do a full backup (including /Data)
I'm currently on stock and it sucks... Did burn my fingers with FRP lock on a phone that couldn't boot to Android... And recovery2 (eRecovery) overwritten by flashing TWRP over it... Not feeling adventurous until TWRP is fully working ?
evalu8t0r said:
Can you explain why this does not work? (is only a P10 problem right?)
Click to expand...
Click to collapse
I don't have much to say but twrp(for VTR and VKY) are both in beta i believe and also, i have problems with data encryption too on twrp.
Can i download it ? where ?
evalu8t0r said:
Can you explain why this does not work? (is only a P10 problem right?)
I gave up on TWRP/Magisk on my P10 Plus because of this
I never figured out why, but guessed it had to do with the encryption of the data partition
I was going to look at it again once TWRP could do a full backup (including /Data)
I'm currently on stock and it sucks... Did burn my fingers with FRP lock on a phone that couldn't boot to Android... And recovery2 (eRecovery) overwritten by flashing TWRP over it... Not feeling adventurous until TWRP is fully working ?
Click to expand...
Click to collapse
im burnin right now with a p10 vtr-lo9 with bootloop and frp lock. only accesible with vol.down and usb while boot mthod. but stuck cause all flash or update commands stuck in command not allowed..
how you fix it?
Does this guide also work for the P10 Lite?
1987yeah said:
Does this guide also work for the P10 Lite?
Click to expand...
Click to collapse
Don't think so.
Hello Guys , i just bought a new Lenovo z5 from Aliexpress it came with flashboot unlocked and rooted i felt insecure with that , so i tried to lock the flashboot and unroot it ...
but now it's not turning on and this message appears
"Your device is corrupt. It can't be trusted and will not boot
Visit This link on another device : g.co/abh"
Any help please
I have the same problem, the saddest thing is that aliexpess of disregard, and the store that oo you bought tambien.esto is a fudge, just wait until lineage makes you compatible to the z5
i have found the solution
Novatronia said:
I have the same problem, the saddest thing is that aliexpess of disregard, and the store that oo you bought tambien.esto is a fudge, just wait until lineage makes you compatible to the z5
Click to expand...
Click to collapse
just flash this Official Rom : bit. ly /2Qjijzq
and flash it with : bit. ly /2wYLpfG
then you should be alright
ps : Flashboot must be locked
if you use qpst/qfil (which is whst you should be doing) to reflash stock rom it is not nessery to relock the bootloader.
ota also works even tho it tells you it does not, but when you get the notification of an update, you can press update and it will install, but the tool for manualy checking does not work.
mousstq said:
just flash this Official Rom : bit. ly /2Qjijzq
and flash it with : bit. ly /2wYLpfG
then you should be alright
ps : Flashboot must be locked
Click to expand...
Click to collapse
Links not found
diogooskamarada said:
Links not found
Click to expand...
Click to collapse
look in this thread, there are all the links you need.
The thread is to install custom rom, but since you need stock qpst, find it in this thread.
https://forum.xda-developers.com/project-treble/trebleenabled-device-discussion/-t3840839
try this link
https://mega.nz/#F!ndhjkT5T!TZ2Gy-HJhJLO_j_GpaNf4A
Check out this video on how to use Qfil
https://youtu.be/TdkNaKpiiUw
rendroid15 said:
look in this thread, there are all the links you need.
The thread is to install custom rom, but since you need stock qpst, find it in this thread.
https://forum.xda-developers.com/project-treble/trebleenabled-device-discussion/-t3840839
try this link
https://mega.nz/#F!ndhjkT5T!TZ2Gy-HJhJLO_j_GpaNf4A
Check out this video on how to use Qfil
https://youtu.be/TdkNaKpiiUw
Click to expand...
Click to collapse
I was able to pass the rom, before installing `` gapps.img`` install TWRP, soon after installing the gapps and soon after the supersu, everything via twrp. It worked for me.
*But the following problems appear in the system:
*WI-FI does not start
TWRP is encrypted after flah supersu
SENSORS giroscopico, bussula, metal detector, and others does not work.
Bluetooth tranferencias is also bugged.
Now I want to go back to the stock rom, but all roms are in boot loop `` LENOVO screen FLASHING OR STOPPED``
I can only keep the custom rom. And now someone to help? I need to at least recover the WI-FI.
Are you using qpst/qfil to reflash stock 3.9.075?
sth0r said:
Are you using qpst/qfil to reflash stock 3.9.075?
Click to expand...
Click to collapse
Yes
Hi there!
I want to root my Wiko View3. It‘s a mtk device with MT6762. Is there any way to grab the boot.img? I already unlocked the bootloader. It runs with Android 9. I can‘t find any TWRP Custom Recovery for this device. Or how can I get the scatter file?
Anyone found a solution to root the View 3 (Lite)?
Is there no way to root this device? Is it currently unrootable?
I think you can grab boot.img using fastboot and patch it manually.
Sent from my OnePlus 5T using XDA Labs
Kokalebougre said:
I think you can grab boot.img using fastboot and patch it manually.
Sent from my OnePlus 5T using XDA Labs
Click to expand...
Click to collapse
How can I grab it? Is there a specific fastboot command for it?
mister_bond said:
Hi there!
I want to root my Wiko View3. It‘s a mtk device with MT6762. Is there any way to grab the boot.img? I already unlocked the bootloader. It runs with Android 9. I can‘t find any TWRP Custom Recovery for this device. Or how can I get the scatter file?
Click to expand...
Click to collapse
A simple search would help, try this and look at this post, I think it will help.
_Masked_ said:
A simple search would help, try this and look at this post, I think it will help.
Click to expand...
Click to collapse
I already know these threads. The instructions in the first thread only work for the Wiko View Version 1, not for the Wiko View 3. Also the mentioned TinnoEngineerMode in the second thread doesn't work for the Wiko View 3.
mister_bond said:
I already know these threads. The instructions in the first thread only work for the Wiko View Version 1, not for the Wiko View 3. Also the mentioned TinnoEngineerMode in the second thread doesn't work for the Wiko View 3.
Click to expand...
Click to collapse
Try kingroot or kingo root, whatever its called. Your phone seems to be unpopular, that's why I think those applications will work. After that just install kingroot to SuperSU and grab the boot.img using root. Then unroot your phone, download magisk manager, install it, patch the boot.img then flash it via fastboot.
I've tried kingoroot, King Root, framaroot and towel Root, without success.
This device is just very new. It just came to the Market.
mister_bond said:
Is there no way to root this device? Is it currently unrootable?
Click to expand...
Click to collapse
Maybe this will work for your Wiko?
https://forum.xda-developers.com/an...atek-armv8-t3922213/post79626434#post79626434
There is also some shorter ways to do the same, for example this app at LG 10 forums...
https://forum.xda-developers.com/lg-k10/how-to/mediatek-easy-root-update-v1-0-3-t3944429
This less stable temp root should make that partition dump an easy task.
(if it works...)
_Masked_ said:
Try kingroot or kingo root, whatever its called. Your phone seems to be unpopular, that's why I think those applications will work. After that just install kingroot to SuperSU and grab the boot.img using root. Then unroot your phone, download magisk manager, install it, patch the boot.img then flash it via fastboot.
Click to expand...
Click to collapse
Kingroot? WTF? Who's running KitKat? Some Lollipop devices can be rooted with Kingsroot, but not Pie!
I've never heard of this phone, I didn't know it was pie.
_Masked_ said:
I've never heard of this phone, I didn't know it was pie.
Click to expand...
Click to collapse
Remove your false and misleading information please. People are wasting their time trying your bad advice.
Hi,i have samsung A205F/DS
Security patch level:1 december 2020
Baseband version:A205DDS9BTL1
my bootloader is locked and i want to install custom recovery.Can anybody help me?
I know all basic instructions about installing gsi but not about recoveries.
Official orange fox recovery is available for my phone but i dont know how to install it.
I also read forums on how to install twrp but i am confused that which file i have to flash using odin and whether or not it will brick my phone.
Please tell me how to unlock the bootloader and which twrp file i have to flash according to my security patch and baseband version.
Hello,
This video is step by step, the procedure applies to the A20 but obviously using the corresponding software for the A20
sercari said:
Hello,
This video is step by step, the procedure applies to the A20 but obviously using the corresponding software for the A20
Click to expand...
Click to collapse
Bro i dont even have twrp installed like your A51
Jinx650 said:
Bro i dont even have twrp installed like your A51
Click to expand...
Click to collapse
Excuse me, see it from the beginning, as I said, the method applies to A20
sercari said:
Excuse me, see it from the beginning, as I said, the method applies to A20
Click to expand...
Click to collapse
Jinx650 said:
Bro i dont even have twrp installed like your A51
Click to expand...
Click to collapse
Ok now i just need twrp file for my december security patch but in your video of unlocking bootloader you didn't used any software in pc did you?
Jinx650 said:
Ok now i just need twrp file for my december security patch but in your video of unlocking bootloader you didn't used any software in pc did you?
Click to expand...
Click to collapse
Exactly, you just have to enable the developer options and there turn on debugging and OEM and and wait until the oem letters turn gray.
[Guide] Quick root and TWRP for the Galaxy A20 (Android 9,10 & 11)
WARNING: Rooting your phone may be dangerous. Rooting a device may void the warranty on the device. It may also make the device unstable or if not done properly, may completely brick the device. XDA-Developers or the author does not take any...
forum.xda-developers.com
Hi all,
Does anyone have the stock firmware for this device?
Or a backup?
I wiped out all my partitions and so far nothing has worked out for me.
i can't seem to find stock rom for this device.
Check this out. https://realmefirmware.com/realme-7-firmware/
You may have to decrypt ofp file and combine some super(s).img *it's easier to flash with RUI 1.0 but I can't find any*. (Also) you might have signature mismatch (yellow sign boot) on your device after that. but that's okay. When booting, just press power button to proceed or simply unlock your bootloader and install magisk
immns said:
Check this out. https://realmefirmware.com/realme-7-firmware/
You may have to decrypt ofp file and combine some super(s).img *it's easier to flash with RUI 1.0 but I can't find any*. (Also) you might have signature mismatch (yellow sign boot) on your device after that. but that's okay. When booting, just press power button to proceed or simply unlock your bootloader and install magisk
Click to expand...
Click to collapse
Thank you, i'll try.
You mean i have to extract the ofp file, right?
What do you mean "combine some super(s).img" ?
SwizzRM7 said:
Thank you, i'll try.
You mean i have to extract the ofp file, right?
What do you mean "combine some super(s).img" ?
Click to expand...
Click to collapse
Right . ofp extractor should be able to extract all of them. There are some cases that super.img (which contains system images) extracted into many parts.
immns said:
Right . ofp extractor should be able to extract all of them. There are some cases that super.img (which contains system images) extracted into many parts.
Click to expand...
Click to collapse
Oops, it doesn't work.
SwizzRM7 said:
Oops, it doesn't work.
Click to expand...
Click to collapse
View attachment 5485783
Unbrick or Downgrade Realme 6, 6i, and 6S using SP Flash Tool
OPPO sub-brand Realme has launched its Realme 6 series devices called Realme 6/6i/6s back in 2020 with Realme UI and Android 10+ out of the box. Now, if
www.getdroidtips.com
immns said:
View attachment 5485783
Unbrick or Downgrade Realme 6, 6i, and 6S using SP Flash Tool
OPPO sub-brand Realme has launched its Realme 6 series devices called Realme 6/6i/6s back in 2020 with Realme UI and Android 10+ out of the box. Now, if
www.getdroidtips.com
Click to expand...
Click to collapse
Hello thanks again,
Sadly still no luck
SwizzRM7 said:
Hello thanks again,
Sadly still no luck
Click to expand...
Click to collapse
trying other sp flash tool? im using v5.2148. lower version give me various error