Related
New in android world, having moto e , unlocked bootloader twrp flashed supersu installed foldermount installed. I rooted my phone to get extra space for system, everything working fine, now i got system update alert,i downloaded the update but after download phone rebooted and open with twrp, not able to install new updae from motorola, when i reboot system in twrp its booted but goes to next reboot and open with twrp again and again.....how i update my phone?
Flash STOCK RECOVERY and Go to System -> Check for System Updates -> Download & Install..
or
Follow this thread
->>> http://forum.xda-developers.com/moto-e/general/4-4-4-ota-update-zip-file-t2811397 <<<-
mrpkarthik said:
Flash STOCK RECOVERY and Go to System -> Check for System Updates -> Download & Install..
or
Follow this thread
->>> http://forum.xda-developers.com/moto-e/general/4-4-4-ota-update-zip-file-t2811397 <<<-
Click to expand...
Click to collapse
Please help me to get stock recovery and help me to flash it
just flash the zip from the thread
Go to the thread already mentioned and download the twrp flashable update.zip. copy it to your device. Now follow these steps:
1: power off your device
2: Press volume down+power button at the same time(pressing volume from a little before helps) for 7-10 seconds.
3. In twrp select install
4. Go to the location of the zip and select it, then flash it.( do not wipe data+cache)
5.reboot
I recently changed my stock recovery to twrp recovery because I want to flash a custom rom for my scc u21 when i flashed the custom rom I forgot to make a back up for my stock rom. So now I want to go back from my stock rom. Can someone upload the stock rom for huawei y6 scc u21 please.
aihte05 said:
I recently changed my stock recovery to twrp recovery because I want to flash a custom rom for my scc u21 when i flashed the custom rom I forgot to make a back up for my stock rom. So now I want to go back from my stock rom. Can someone upload the stock rom for huawei y6 scc u21 please.
Click to expand...
Click to collapse
download-c1.huawei.com/download/downloadCenter?downloadId=83446&version=327553&sit
da.fallen said:
download-c1.huawei.com/download/downloadCenter?downloadId=83446&version=327553&sit
Click to expand...
Click to collapse
Thanks
If you have stock recovery, use this method:
1. Download the .zip file. http://download-c1.huawei.com/download/downloadCenter?downloadId=83446&version=327553&sit
2. Unzip/extract it. Copy the dload folder to your SD card’s root directory.
3. Turn off your Huawei. (Make sure your battery has enough power. Charge it if necessary.) Insert the memory card.
4. Press both Volume keys (VOL UP and DOWN) and then the power key until the software upgrade progress bar displays. Then you can release all keys.
5. Wait until the progress bar finishes and the phone restart.
-------------------------------------------
If you have twrp recovery, use this method:
This is stock rom that i backup but rooted with kingroot (can unrooted). Flash Using twrp recovery 2.8
1. Download this : https://drive.google.com/open?id=0B8O0sP_rAVusMHpjVTVwYjZIamc
2. Extact and copy TWRP folder to sd card or internal storage.
3. Turn off your Huawei.
4. Press both Volume keys (VOL UP and DOWN) and then the power key to enter recovery
5. Press wipe button and wipe data.
6. Press Restore button.
7. Select which storage that u put TWRP file
8. It will show the files. Press that
9. Tick all or which u want to restore
10. Swipe to restore and wait. reboot
hope its help u.
Doesn't work. stays the same.
any other ways how to reprogram this phone. always in fastboot mode
This might help you after realizing that you want to install custom ROM again after upgrading to android 11 MIUI but you cannot install android 10 or 11 based ROM and stuck with either boot loop or android rescue party.
WARNING: This might wipe every writable partition. Charge your phone at least 20% or more to prevent from destroying these partitions.
Instructions:
1. Download firmware from here
2. Download full ROM (either recovery or fastboot) from here
3. Save the firmware zip file it in either internal storage or sdcard. Reboot to TWRP afterwards
4. Tap install and find the zip file in your storage and install. Wait for a couple of seconds to get done.
To install full ROM
Recovery
1. After installing firmware from recovery mode, don't reboot. If you reboot the system it will fail to boot. Boot to fastboot if you fail this step and flash a recovery image. Proceed with next step.
2. Install full ROM flashable zip from sdcard or internal storage.
3. Format /data. Reboot.
Using fastboot
1. Boot from fastboot mode
2. Extract full ROM fastboot zip file.
3. Open miflash and locate the fastboot folder.
4. Choose flash_all. Click start.
5. The phone reboots itself. Boot to recovery mode and wipe data.
All done. The phone is now downgraded from android 11 back to android 10.
Note: I got 2 anti triggered when attempting to downgrade the phone using recovery and fastboot without installing firmware zip file first. RIP me I guess I voided my warranty anyways so doesnt matter as I already applied some insurance for my device.
TL;DR: Installed Recovery will get erased as I mentioned in WARNING. Please don't skip every step.
Edit: since it made confusion, I split steps for recovery and fastboot mode.
Has anyone tried this procedure?
Im on 12.0.6.0(EU). Bootloader locked (wait 3days) so no TWRP. Want downgrade to 12.0.8.0(EU) and flash Pixelexperience ROM.
It will work?
I'm a bit confusing... Links inserted in first 2 points seem to be the same link. So what I've to download exactly?
I'm on 12.0.7.0 Android 10 but I'm curious to try 12.0.6.0 Android 11 stable beta released some days ago...
PYCON said:
I'm a bit confusing... Links inserted in first 2 points seem to be the same link. So what I've to download exactly?
I'm on 12.0.7.0 Android 10 but I'm curious to try 12.0.6.0 Android 11 stable beta released some days ago...
Click to expand...
Click to collapse
Its not the same. First one is cca. 80MB of size while full rom is 2.4GB for recovery and 4.4GB for fastboot.
I did this method yesterday and its working. No problems whatsoever.
The only thing i would add is you need both versions of rom - recovery and fastboot. Recovery when you flash for the first time in recovery and fastboot when you flash with Mi flash.
And my advice is, android 11 miui is really bad. Its not finished, it stutters a lot, u can't use third party launchers with gesture navigation (at least in my case, Nova lanucher), performance is bad.
Not worth any time.
Steelrock said:
Its not the same. First one is cca. 80MB of size while full rom is 2.4GB for recovery and 4.4GB for fastboot.
I did this method yesterday and its working. No problems whatsoever.
The only thing i would add is you need both versions of rom - recovery and fastboot. Recovery when you flash for the first time in recovery and fastboot when you flash with Mi flash.
And my advice is, android 11 miui is really bad. Its not finished, it stutters a lot, u can't use third party launchers with gesture navigation (at least in my case, Nova lanucher), performance is bad.
Not worth any time.
Click to expand...
Click to collapse
Ok, ok, good to know. I'm just curious... I'll remain with A10 till when A11 will be good enough to be used as a daily driver
Hi. Does this method requires unlocked bootloader? Thanks
hi. this method not working for me !
*phone is unlocked !
ar-rabbiar said:
hi. this method not working for me !
*phone is unlocked !
Click to expand...
Click to collapse
This error is normal because ur phone is unlocked....but the phone should reboot normal in the new ROM. It did not happen this way?
Alin45 said:
This error is normal because ur phone is unlocked....but the phone should reboot normal in the new ROM. It did not happen this way?
Click to expand...
Click to collapse
reboot with bootloop and again. and just miui 12 a11 or rom with selinux permissive working for flash.
The same in here. Bootloop, bootloop....
But if flash the a11 rom it works.
ar-rabbiar said:
hi. this method not working for me !
*phone is unlocked !
Click to expand...
Click to collapse
did you try to flash firmware file from twrp recovery first? also that error means that a checkpoint failed which you need to disable or remove in configuration settings.
tourofeio said:
The same in here. Bootloop, bootloop....
But if flash the a11 rom it works.
Click to expand...
Click to collapse
did you tried recovery or fastboot flashing? and did you installed firmware first before installing full rom?
endva3 said:
Has anyone tried this procedure?
Im on 12.0.6.0(EU). Bootloader locked (wait 3days) so no TWRP. Want downgrade to 12.0.8.0(EU) and flash Pixelexperience ROM.
It will work?
Click to expand...
Click to collapse
i only tried recovery method and it works fine after days of trying. 12.0.6 android 11 is still buggy and miui needs to fix it a lot. most of apps are not well optimized for this flavor.
Today unlocked bootloader. Flashing 12.0.8.0 (i have 12.0.6.0 A11).
Everything work perfect. No bootloop, bootloader relock and works fine
People are probaly skipping some steps.
1. Download Firmware small size files
2. Download full Firmware, both - fastboot and recovery (put it on SD card, small and recovery)
3. Install Twrp or Orangefox recovery (download it from somewhere)
4. Enter into recovery and install small firmware FIRST, dont reboot, install big firmware (recovery version) SECOND
5. do not reboot
6. format data
7. Now reboot into fastboot
8. Extract fastboot firmware zip into new folder on desktop
9. Start Mi flash, select that folder where u extracted files and tick "clean only" on the bottom of the Mi flash if u want to leave bootloader unlocked and from drop down menu near that pick "flash_all.bat".
Thats how i did it.
Steelrock said:
People are probaly skipping some steps.
1. Download Firmware small size files
2. Download full Firmware, both - fastboot and recovery (put it on SD card, small and recovery)
3. Install Twrp or Orangefox recovery (download it from somewhere)
4. Enter into recovery and install small firmware FIRST, dont reboot, install big firmware (recovery version) SECOND
5. do not reboot
6. format data
7. Now reboot into fastboot
8. Extract fastboot firmware zip into new folder on desktop
9. Start Mi flash, select that folder where u extracted files and tick "clean only" on the bottom of the Mi flash if u want to leave bootloader unlocked and from drop down menu near that pick "flash_all.bat".
Thats how i did it.
Click to expand...
Click to collapse
i did the same, but looking to partitions of system, product and vendor, i understand that flashing the files via recovery and fastboot they dont write in that partitions.
looks like the partitions are read only. thanks
I try to flash a custom rom like arrows os via recovery , the rom shows the boot logo of arrows rom, and then bootloop.
tourofeio said:
I try to flash a custom rom like arrows os via recovery , the rom shows the boot logo of arrows rom, and then bootloop.
Click to expand...
Click to collapse
Most probable, u forgot to do a Format data (yes) before reboot to system.
endva3 said:
Today unlocked bootloader. Flashing 12.0.8.0 (i have 12.0.6.0 A11).
Everything work perfect. No bootloop, bootloader relock and works fine
Click to expand...
Click to collapse
Did you flash it from the built-in recovery or with MiFlash? (My 167 hour waiting period ends tomorrow)
Solved people. change the version of the Mi Flash.
This is my first post of this kind so bear with me, please
Info for Galaxy A8 Star:
CPU : SDM660 ( A only, 64bit )Support Project TrebleSupport System as root
※WARNING※
You will have to have OEM unlocked and this will void your warranty!!!
※also, I'm not responsible for the accident about you bricking your device※Step. 1
First of all, you will need to download two custom recoveries (TWRP, OrangeFox)
OrangeFox: https://forum.xda-developers.com/t/orange-fox-recovery-galaxy-a8-star-sm-g885f.4301055/
TWRP: https://github.com/sabpprook/android_device_samsung_astarqlte (test3 file does not work for me but you can try)
I want to finish it only using TWRP but the only TWRP that was working does NOT support flashing the system.img files
and also Orange Fox recovery has a bug that while in recovery you can't connect with the computer and push the files to the phone
so it was required to use two bootloader
Step. 2
Odin: https://odindownload.com/
I also recommend downloading the stock ROM for backup
1. after downloading the TWRP from the link (for Odin we will use the .tar file)
put your phone into download mode
Code:
adb reboot download
or just turn off the phone and press the power button, volume up, Bixby button at the same time
and use the volume button to boot into download mode
2. after the phone went to the download mode, go to Odin and at the ap section add the TWRP file then flash it
3. press the volume down, power button to turn off the device, and right after that press the power button, volume up, Bixby button at the same time
4. you will now see the TWRP recovery, press wipe, and format data
5. now we will download some files we needed
makemesar.zip: (at the attachment) or you can download it from https://drive.google.com/u/0/uc?export=download&confirm=P1-1&id=1F_f_tL4sEYFx5fa6AnwR0x1tlYhqarcT ( when you unzip it there is the zip file )Permissiver_5.zip: https://androidfilehost.com/?fid=6006931924117940902Disable_Dm-Verity_ForceEncrypt: https://drive.google.com/file/d/166texWJQhR1RgRoXiRSH_M2Q2mAyS2gC/viewCertification_Patch.zip: (at the attachment)Havoc Rom (you can use any rom you want but this is the one that I've managed to work) http://download.havoc-os.com/?dir=arm64-ab (download arm64 ab with gapps)most rooms with AB partition will be supportedMagisk: https://magiskmanager.com/ (download the apk and make it a zip file) - you could need for the phone to get the boot (makemesar will unroot it so don't worry)6. after downloading all the files that we need, we will push the files to our device using
Code:
adb push 'file dir' sdcard
※ also push TWRP .img file and the OrangeFox .img too!!
7. after pushing all the files we need to our phone, press install from the TWRP recovery and press flash from image
and select the Orange Fox .img as a recovery image, and reboot to bootloader
8. now you will boot to the Orange Fox recovery, (locate to data/media to find the files)
at the Orange Fox recovery wipe System, Dalvlk / ART Cache, Cache, Data
9. after wiping now install the os.img file and reboot to the bootloader (before reboot you will see the warning that OS is not installed), go to the menu and mount system, vendor, and install Dm Verity.zip, Permissiver_5.zip, makemesar.zip then reboot to the bootloader again, (now we will not see the OS is not installed) and now install the Certification Patch.zip
10. reboot to the system and you will see the new os setup process (sometimes you have to install the Certification Patch after setup the os )
10-1. if your device keeps going to download mode, reinstall the magisk and then reboot the phone, then it will work.
(after it boots, gently turns off the phone and install makemesar.zip first and install Dm-Verity to unroot) - some of you will be forced to use magisk but doing some wiping or reflashing the system.img sometimes makes the unrooted state work (or flash the stock system.img (extract from the stockrom) and flash the gsi ROM without wiping )
Screenshots: At Below
Currently, MTP does not work but I think this is the problem with the Havoc os, if you use another rom it could work
face unlock, fingerprint unlock works, the camera works.
if I manage to get other ROMs workingI will update the post
also at the first time I have made mine to boot without magisk but while doing again for this post I'm having trouble without magisk, if I found a way that works always I will add that to the post
[UPDATE#2]
you can download the Pixel 3 gsi rom from
(Thanks for Santa Duck providing this information!!!!)
with this files you can install the android 12 gsi rom in a usable state!!
and also ADB is working with this rom
there is still a bootlooping bug so do it with caution
[Update#1]
Today I have managed to install the Android Beta 3.1 [ is beta software and I don't recommend using it as your daily os]
https://sourceforge.net/projects/nippongsi/files/Pixel%20-%20Pixel4a_SBeta3.1%20-%20TBO42ZZ8IF/Pixel4a_SBeta3.1-AB-12-20210727-nippongsi.img.gz/download
you can download the ROM file from Nippon's Sourceforge
every step is the same and you just have to change the rom as this
there's a bug that developer setting crash the settings app and it is working but it does have some lots of bugs, and screen lock is not working but I'll try to fix it and upload the method
if your device get boot looped, press Bixby + power + vol down to boot into download mode and flash the stock AP file using Odin
[I was supposed to edit the upper one but accidentally created as a reply ]
Just go to UPDATE#2
Skuld Norniern said:
Havoc Rom (you can use any rom you want but this is the one that I've managed to work) http://download.havoc-os.com/?dir=arm64-ab (download arm64 ab with gapps)
Click to expand...
Click to collapse
Hey I thought that A8 star is an A-only device. Does flashing A/B roms cause any problems?
thongass000 said:
Hey I thought that A8 star is an A-only device. Does flashing A/B roms cause any problems?
Click to expand...
Click to collapse
thanks for the makemesar.zip we can install the A/B partition roms without any problems on the A only device and for me the A only roms won’t work on my phone
Skuld Norniern said:
thanks for the makemesar.zip we can install the A/B partition roms without any problems on the A only device and for me the A only roms won’t work on my phone
Click to expand...
Click to collapse
Hi I'm back. Do you have any issue with wired audio? I have a A9 2018 (same chipset) and audio still goes through speaker while headphones are plugged in.
If anything in Phh Treble Settings helps you, please tell me. Or if you don't need any settings for wired audio, can you send me a zip file containing any files that have the name "audio_policy" in /vendor/etc? Thanks.
thongass000 said:
Hi I'm back. Do you have any issue with wired audio? I have a A9 2018 (same chipset) and audio still goes through speaker while headphones are plugged in.
If anything in Phh Treble Settings helps you, please tell me. Or if you don't need any settings for wired audio, can you send me a zip file containing any files that have the name "audio_policy" in /vendor/etc? Thanks.
Click to expand...
Click to collapse
Sorry for being late!!
for me, I do have the same issue with wired audio and I have not been able to find a way to fix it yet
if I manage to fix the issue I will fix the main article
Skuld Norniern said:
Skuld Norniern said:
This is my first post of this kind so bear with me, please
Info for Galaxy A8 Star:
CPU : SDM660 ( A only, 64bit )Support Project TrebleSupport System as root
※WARNING※
You will have to have OEM unlocked and this will void your warranty!!!
※also, I'm not responsible for the accident about you bricking your device※Step. 1
First of all, you will need to download two custom recoveries (TWRP, OrangeFox)
OrangeFox: https://forum.xda-developers.com/t/orange-fox-recovery-galaxy-a8-star-sm-g885f.4301055/
TWRP: https://github.com/sabpprook/android_device_samsung_astarqlte (test3 file does not work for me but you can try)
I want to finish it only using TWRP but the only TWRP that was working does NOT support flashing the system.img files
and also Orange Fox recovery has a bug that while in recovery you can't connect with the computer and push the files to the phone
so it was required to use two bootloader
Step. 2
Odin: https://odindownload.com/
I also recommend downloading the stock ROM for backup
1. after downloading the TWRP from the link (for Odin we will use the .tar file)
put your phone into download mode
Code:
adb reboot download
or just turn off the phone and press the power button, volume up, Bixby button at the same time
and use the volume button to boot into download mode
2. after the phone went to the download mode, go to Odin and at the ap section add the TWRP file then flash it
3. press the volume down, power button to turn off the device, and right after that press the power button, volume up, Bixby button at the same time
4. you will now see the TWRP recovery, press wipe, and format data
5. now we will download some files we needed
makemesar.zip: (at the attachment) or you can download it from https://drive.google.com/u/0/uc?export=download&confirm=P1-1&id=1F_f_tL4sEYFx5fa6AnwR0x1tlYhqarcT ( when you unzip it there is the zip file )Permissiver_5.zip: https://androidfilehost.com/?fid=6006931924117940902Disable_Dm-Verity_ForceEncrypt: https://drive.google.com/file/d/166texWJQhR1RgRoXiRSH_M2Q2mAyS2gC/viewCertification_Patch.zip: (at the attachment)Havoc Rom (you can use any rom you want but this is the one that I've managed to work) http://download.havoc-os.com/?dir=arm64-ab (download arm64 ab with gapps)most rooms with AB partition will be supportedMagisk: https://magiskmanager.com/ (download the apk and make it a zip file) - you could need for the phone to get the boot (makemesar will unroot it so don't worry)6. after downloading all the files that we need, we will push the files to our device using
Code:
adb push 'file dir' sdcard
※ also push TWRP .img file and the OrangeFox .img too!!
7. after pushing all the files we need to our phone, press install from the TWRP recovery and press flash from image
and select the Orange Fox .img as a recovery image, and reboot to bootloader
8. now you will boot to the Orange Fox recovery, (locate to data/media to find the files)
at the Orange Fox recovery wipe System, Dalvlk / ART Cache, Cache, Data
9. after wiping now install the os.img file and reboot to the bootloader (before reboot you will see the warning that OS is not installed), go to the menu and mount system, vendor, and install Dm Verity.zip, Permissiver_5.zip, makemesar.zip then reboot to the bootloader again, (now we will not see the OS is not installed) and now install the Certification Patch.zip
10. reboot to the system and you will see the new os setup process (sometimes you have to install the Certification Patch after setup the os )
10-1. if your device keeps going to download mode, reinstall the magisk and then reboot the phone, then it will work.
(after it boots, gently turns off the phone and install makemesar.zip first and install Dm-Verity to unroot) - some of you will be forced to use magisk but doing some wiping or reflashing the system.img sometimes makes the unrooted state work (or flash the stock system.img (extract from the stockrom) and flash the gsi ROM without wiping )
Screenshots: At Below
Currently, MTP does not work but I think this is the problem with the Havoc os, if you use another rom it could work
face unlock, fingerprint unlock works, the camera works.
if I manage to get other ROMs workingI will update the post
also at the first time I have made mine to boot without magisk but while doing again for this post I'm having trouble without magisk, if I found a way that works always I will add that to the post
[UPDATE#2]
you can download the Pixel 3 gsi rom from
(Thanks for Santa Duck providing this information!!!!)
with this files you can install the android 12 gsi rom in a usable state!!
and also ADB is working with this rom
there is still a bootlooping bug so do it with caution
Click to expand...
Click to collapse
Hello sir i can't find havoc os 4.5 in:https://download.havoc-os.com/?dir=arm64-ab
Click to expand...
Click to collapse
After flashing twrp on my sm g885f, cant get into terp,
mine shows volume down + power to restart, not to enter turn off
how can i enter into twrp
Skuld Norniern said:
9. after wiping now install the os.img file and reboot to the bootloader (before reboot you will see the warning that OS is not installed), go to the menu and mount system, vendor, and install Dm Verity.zip, Permissiver_5.zip, makemesar.zip then reboot to the bootloader again, (now we will not see the OS is not installed) and now install the Certification Patch.zip
Click to expand...
Click to collapse
'os.img file' where
, guess i fixed it
when installing Certification_Patch.zip, it shows command error
what i found- this patch is for G885FDXS5CUL1, mine is
G885FDXU5CUG1
there is no forums for redmi 10
San2005 said:
there is no forums for redmi 10
Click to expand...
Click to collapse
Is that your phone?
[Tutorial] Xiaomi Redmi 10 [Selene] Custom Rom Installation Method [All Error Fixed].
You Want Video turorial ? Cheack This Out;- https://forum.xda-developers.com/t/xiaomi-redmi-10-redmi-10-prime-redmi-10-2022-redmi-10-2021-selene-custom-rom-installation-video-tutorial.4583503/ Tutorial Install Custom rom Selene Requirements ...
forum.xda-developers.com
joke19 said:
Is that your phone?
[Tutorial] Xiaomi Redmi 10 [Selene] Custom Rom Installation Method [All Error Fixed].
You Want Video turorial ? Cheack This Out;- https://forum.xda-developers.com/t/xiaomi-redmi-10-redmi-10-prime-redmi-10-2022-redmi-10-2021-selene-custom-rom-installation-video-tutorial.4583503/ Tutorial Install Custom rom Selene Requirements ...
forum.xda-developers.com
Click to expand...
Click to collapse
yeah but it's for miui 12 and i have miui 13 does updating software remove twrp
San2005 said:
yeah but it's for miui 12 and i have miui 13 does updating software remove twrp
Click to expand...
Click to collapse
How did you get miui 13 mine is stuck on 12.5 and i have some bugs that might get solved with a update.
Try this it is working in Xiaomi redmi 10 Selene in miui 13
fastboot flash boot [name of the file twrp].img
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
fastboot reboot recovery
copy stock boot.img to sdcard or internal and flash it on boot category in twrp
select advanced menu > select install curent twrp
install magisk.zip if you want
Reboot system
If you have any question don't hesitate and go in my direct message, excuse me for my Bad english :/
alan7283 said:
Try this it is working in Xiaomi redmi 10 Selene in miui 13
fastboot flash boot twrp13.img
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
fastboot reboot recovery
copy stock boot.img to sdcard or internal and flash it on boot category in twrp
select advanced menu > select install curent twrp
Reboot system
If you prefer orange fox recovery, go in the twrp, flash boot-orangefox.img in the recovery and reboot !
If you have any question don't hesitate and go in my direct message, excuse me for my Bad english
Click to expand...
Click to collapse
You got MIUI 13 ?
Yes
alan7283 said:
Yes
Click to expand...
Click to collapse
Howw ??? OTA ?
No, the update was proposed to me by itself when I was on miui 12.5, however you can always flash it via fastboot, I can make you a tutorial if you want
alan7283 said:
No, the update was proposed to me by itself when I was on miui 12.5, however you can always flash it via fastboot, I can make you a tutorial if you want
Click to expand...
Click to collapse
I would love too but won't I lose warranty?
dda7lite said:
I would love too but won't I lose warranty?
Click to expand...
Click to collapse
Yes but if you relock your bootloader you can get your warranty back so don't worry about it
alan7283 said:
Yes but if you relock your bootloader you can get your warranty back so don't worry about it
Click to expand...
Click to collapse
Your sure? because I can't lose my 3 year warranty
Yes, I'm sure don't worry, but if you flash a rom via fastboot, you lose all the data of the phone, do you accept that?
alan7283 said:
Yes, I'm sure don't worry, but if you flash a rom via fastboot, you lose all the data of the phone, do you accept that?
Click to expand...
Click to collapse
Yeah and I will probably not flash it today I might sent it to warranty first because it's giving me a really weird problem
What problem?
alan7283 said:
What problem?
Click to expand...
Click to collapse
When I plug in charger phone immediately becomes unresponsive, touch stops and won't turn on (only with fingerprint)
Oh okok, no worries probably a screen problem, feel free to come back to me when you are ready
alan7283 said:
Oh okok, no worries probably a screen problem, feel free to come back to me when you are ready
Click to expand...
Click to collapse
You can write the tutorial if you want and I'll save it
dda7lite said:
You can write the tutorial if you want and I'll save it
Click to expand...
Click to collapse
Ok, first you have to unlock the bootloader:
Step 1: Download this file and unzip it. https://androidfilehost.com/?fid=7161016148664849473
Once you have unzipped it, go to the mediatekbootloaderunlock folder and go to the drivers folder, right click on the file "cdc-acm.inf" and then click on install
https://www.technobuzz.net/wp-content/uploads/2022/01/Install-MTK-driver.jpg
Once this is done, go back and install usbdk (x64 for 64 bit OS, x86 for 32 bit OS) on your PC).
https://www.technobuzz.net/wp-content/uploads/2022/01/Instal-USB-drivers-1024x450.jpg
Once this is done, restart your computer (important)
Turn off your redmi 10
In the mediatekbootloaderunlock folder open the "UnlockBootloader.bat" file
Once the file is open, press the volume + and volume - at the same time and once this is done, connect the cable to your PC.
Wait until the window closes.
Your bootloader is now unlocked.
Now that the bootloader of the phone has been unlocked, we will flash the new phone rom.
Step 2: Download the phone rom from this site: https://miuirom.org/phones/redmi-10
(I advise you the Indonesian region)
Once the rom has been downloaded, the rom file ends in .tgz, unzip the rom with WinRAR or any other unzipping tool.
WinRAR
WinRAR - the data compression, encryption and archiving tool for Windows that opens RAR and ZIP files. Compatible with many other file formats.
www.win-rar.com
Once the rom has been decompressed, download Mi Flash tool on this link:
MiFlash20200314
MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.
www.mediafire.com
Unzip the zip file and open the file miflashtool.exe
Once opened, put your phone in fastboot mode (power + volume -)
Connect the phone with a cable to the PC
Click on refresh, the phone should appear.
Then click on select and select the unzipped rom you made earlier.
At the bottom of mi flash tool, click on clean all and lock, this will delete all data and close the bootloader.
Once this is done, click on flash and wait for it to finish.
If you get an error like: checkpoint is not done fastboot lock or something like that, don't worry, it means it worked.
You now have miui 13, enjoy.
alan7283 said:
Ok, first you have to unlock the bootloader:
Step 1: Download this file and unzip it. https://androidfilehost.com/?fid=7161016148664849473
Once you have unzipped it, go to the mediatekbootloaderunlock folder and go to the drivers folder, right click on the file "cdc-acm.inf" and then click on install
https://www.technobuzz.net/wp-content/uploads/2022/01/Install-MTK-driver.jpg
Once this is done, go back and install usbdk (x64 for 64 bit OS, x86 for 32 bit OS) on your PC).
https://www.technobuzz.net/wp-content/uploads/2022/01/Instal-USB-drivers-1024x450.jpg
Once this is done, restart your computer (important)
Turn off your redmi 10
In the mediatekbootloaderunlock folder open the "UnlockBootloader.bat" file
Once the file is open, press the volume + and volume - at the same time and once this is done, connect the cable to your PC.
Wait until the window closes.
Your bootloader is now unlocked.
Now that the bootloader of the phone has been unlocked, we will flash the new phone rom.
Step 2: Download the phone rom from this site: https://miuirom.org/phones/redmi-10
(I advise you the Indonesian region)
Once the rom has been downloaded, the rom file ends in .tgz, unzip the rom with WinRAR or any other unzipping tool.
WinRAR
WinRAR - the data compression, encryption and archiving tool for Windows that opens RAR and ZIP files. Compatible with many other file formats.
www.win-rar.com
Once the rom has been decompressed, download Mi Flash tool on this link:
MiFlash20200314
MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.
www.mediafire.com
Unzip the zip file and open the file miflashtool.exe
Once opened, put your phone in fastboot mode (power + volume -)
Connect the phone with a cable to the PC
Click on refresh, the phone should appear.
Then click on select and select the unzipped rom you made earlier.
At the bottom of mi flash tool, click on clean all and lock, this will delete all data and close the bootloader.
Once this is done, click on flash and wait for it to finish.
If you get an error like: checkpoint is not done fastboot lock or something like that, don't worry, it means it worked.
You now have miui 13, enjoy.
Click to expand...
Click to collapse
I have 2 questions does it work on Redmi 10 2022 and don't it get Bricked if I lock bootloader with other region ?