[OFFICIAL] AOSP R Mod //CAOS11 - Treble-Enabled Device Development A/AB ROMS

C A O S 11
< Your warranty is now void! >
We're not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this ROM
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at us for messing up your device, we will laugh at you​
CAOS 11 (Custom AOSP OS) is a project which based on @phhusson's Treble GSI AOSP 11. I began it because original project have not only pros (stability, speed, support) but also some issues and limitations - pure AOSP code have some bugs / haven't much useful things and it's a hard way pulling it. So i did this fork. System can run with SELinux enforced state, as an original Phh AOSP GSI. Fully compatible with PHH-Treble patches. Has dynamic root which can be activated/deactivated without reboot - 'su' binary and SuperUser app (can works on all devices even with system read-only). Also has dynamic SafetyNet helper (but it compatible not with all devices), users have four ways to pass SafetyNet: a. just enable SafetyNet option (recommended) b. disable SafetyNet and enable "Spoof Pixel 5" then reboot c. enable both options and reboot d. mount system as RW and create empty file /system/phh/secure (legacy method), and in the Recovery do Wipe Data or Factory reset
UPDATE VERSION
latest build: 2022.03.21
treble patches: v316
SPL: 5 Mar 2022
FEATURES/CHANGES
see Project page changelog
DOWNLOAD (CL1CK HERE)
vanilla, gapps, go-gapps: all possible architectures
NAMING
Some information you should know about knowing what type of gsi it is
<ARCH>_xyZ
<ARCH> can either be arm, a64 (arm32_binder64) or arm64
x can either be a or b
y can either be v, o, g or f
Z can be N or S
b = a/b
a = a-only
g = gapps
o = gapps-go
v = vanilla (no gapps included)
f = floss (free & open source apps instead gapps)
N = no superuser
S = superuser included
Z = dynamic superuser included
-lite = for VNDK Lite vendors (also can help with broken camera even on normal VNDK vendors)
so in most common example "arm64_avZ" is ARM64 A-only vanilla with dynamic superuser
CONTACTS
> telegram group
> project page
KN0WN BUGS
• excluding fixes, the same as on AOSP Roar (in some cases doesn't work: broadcasting on TV, calls via BT; offline charging does not work normally etc etc)
NOTE: always test ROM first without Magisk (with clean boot ramdisk). and don't send me bug reports if you have:
a) Magisk installed
b) modified/custom vendor or kernel
c) dirty flashing rom without wiping data
d) modified props values (another device fingerprint and so on)
CREDITS
persons: @phhusson
projects: TrebleGSI • BlissROMs • crDroid • PixelExperience • ION • neon-OS • Havoc-OS • LineageOS • Evolution-X • LiquidRemix • ExtendedUI • GrapheneOS • ABC Rom • SyberiaOS • RevengeOS • ProtonAOSP

#include_one

#include_two

Great to this thread comes up... it been long time coming.

Can't wait to see when a CAOS is build on Android 12

eremitein said:
KN0WN BUGS​• excluding fixes, the same as on AOSP Quack
Click to expand...
Click to collapse
Guess this should read "the same as on AOSP Roar"

Hi,
I flashed CAOS R 2021.04.19 in my HTC U12 life but DigitalWellbeing tools are not available. Is it only available for pixel devices ?
And I'm unable to transfer files using USB connection? Any suggestions or work around to get it working ?
Thank you.

nsbandara said:
Hi,
I flashed CAOS R 2021.04.19 in my HTC U12 life but DigitalWellbeing tools are not available. Is it only available for pixel devices ?
And I'm unable to transfer files using USB connection? Any suggestions or work around to get it working ?
Thank you.
Click to expand...
Click to collapse
are you flashed gappsed variant? i just added Wellbeing but can't test it now, my device have small system partition and i can't easy flash gappsed build
for MTP try enable file transfer in Developer settings

eremitein said:
are you flashed gappsed variant? i just added Wellbeing but can't test it now, my device have small system partition and i can't easy flash gappsed build
for MTP try enable file transfer in Developer settings
Click to expand...
Click to collapse
Yes, I flashed caos-v305-210419-arm64-agZ. I'm unable to find any settings/app entry for WellBeing.

@eremitein - thanks for your work. The ROM is great and fast.
I have it installed on Xiaomi Poco X3 Pro. There are some problems with sound and screen backlight but both of them can be resolved from Phh treble settings. I have posted solutions in X3 Pro thread.
I have one question - in case I would like to update CAOS in future. Is there any "official" way to do this ? Is it possible at all ? Or clean flash is required every time you post new version ?

nsbandara said:
Yes, I flashed caos-v305-210419-arm64-agZ. I'm unable to find any settings/app entry for WellBeing.
Click to expand...
Click to collapse
sad, but i guess you have same with AOSP

as400l said:
I have one question - in case I would like to update CAOS in future. Is there any "official" way to do this ? Is it possible at all ? Or clean flash is required every time you post new version ?
Click to expand...
Click to collapse
How to update GSI
< only same ROM variants >
• go to TWRP, make wipe Dalvik cache (optionally, but recommended)
• install new GSI img to system (or reboot to fastboot/fastbootd and flash GSI)
• boot to TWRP again, resize System
• reinstall same GApps if used before
note: dirty update is not supports by me, do not send bug reports - if you will have bugs first try clean install

CAOS v306 2021.04.24
download /// changelog

Big fan of this CF. I hope there is a option to update (with further versions) using fastboot/adb. (Without loosing data) My Oukitel WP6 just supports these 2 options .

Balsamderaersche said:
My Oukitel WP6 just supports these 2 options .
Click to expand...
Click to collapse
I have one too, and you can simply flash a new version on top of the old one in fastboot without wiping, works totally fine without loss of data.
BTW @eremitein , did you work some magic on VoLTE in the latest releases, or is it on @phhusson side? For me it just works out of the box suddenly, no more fiddling with IMS or APN settings, see screenshot. This is on your latest crDRom, really really nice, see screenshot:

GroovyG said:
I have one too, and you can simply flash a new version on top of the old one in fastboot without wiping, works totally fine without loss of data.
BTW @eremitein , did you work some magic on VoLTE in the latest releases, or is it on @phhusson side? For me it just works out of the box suddenly, no more fiddling with IMS or APN settings, see screenshot. This is on your latest crDRom, really really nice, see screenshot:
Click to expand...
Click to collapse
So basically just:
fastboot flash system xxx.img
?

Yeah!
And a
fastboot erase cache
never hurts, just to have no junk left in there.

GroovyG said:
BTW @eremitein , did you work some magic on VoLTE in the latest releases, or is it on @phhusson side? For me it just works out of the box suddenly, no more fiddling with IMS or APN settings, see screenshot. This is on your latest crDRom, really really nice, see screenshot:
Click to expand...
Click to collapse
is it 21.04.28 build?

No, that's on 21.04.25, didn't see you had a new one up already again, going to install later today
This is hands down the best ROM I have ever used, huge props to you!

Please help me and give me the download links for ( A705FN im arm64-ab )
I'm confused

Related

[ROM][sGSI][UPDATED]OxygenOS for beryllium[26/09/2019]

Warnings:-
Code:
/*
[SIZE="3"] * I am not responsible for bricked devices, dead SD cards, dead cats,
* thermonuclear war, or you getting fired because the alarm app failed.
* YOU are choosing to make these modifications, and no point
* in pointing the finger at me for messing up your device
*/
[/SIZE]
OxygenOS is a customized version of the Android mobile operating system developed by Chinese smartphone manufacturer OnePlus exclusively for their smartphones. This is a ported version of latest Oxygen OS available for Oneplus6/6T as of now.
Current Status
RIL
Phone calls: Working.
Mobile Data: Working.
SMS: Working.
Dual SIM: Working.
Dual Volte: Working.
FINGERPRINT
Fingerprint is Working.
WIFI
2.4G/5G : Working.
Hotspot: Working.
Hidden SSID: Working.
Miracast: Working.
BLUETOOTH
Working.
LED
Working.
GPS
Working.
SENSORS
All sensors are Working.
MEDIA
Video Playback: Working.
Hardware decoder: Working.
CAMERA
Oneplus native camera: Few features are broken(ex portrait mode etc.).
GCAM port: Working.
AUDIO
Recording: Working.
Playback: Working.
Oneplus Audio Tuner: Disabled/Doesnt support
ENCRYPTION
Working.
SILENT MODE
Not Working -- Due to absence of Three way Switch/Alert Slider.
Workaround : Use thirdparty app/widget.
Gestures
Screen Off Gestures : Disabled/Doesnt support to our panel.
Note : Flashing other kernels will break dtwp and optimizations added. Dont report any issues if any., in case u flash any other kernel, even though it works.
INSTRUCTIONS
Download the ROM
Backup everything.
Wipe System, Data, Cache
Do factory reset.(Optional : But this is recommended to avoid any issues)
Flash the downloaded Rom.zip + vendor patch(Gapps are included).
Flash DFE(Optional : For those who dont need encryption)
Flash vendor patch(Flash this everytime you change vendor).
Note: after booting up install the latest Google play services from apk pure to add Google accounts
CHANGELOG :
Code:
-initial build
-Latest base taken from OP6
-Fixed notch cutout and adjusted corner padding
-Fixed brightness values
-Removed OP Dirac
Telegram Group:
https://t.me/pocoPorts
DONATIONS
Help Supporting me. Any donations are highly appreciated.
UPI ID:[email protected]
PayPal:https://www.paypal.me/adil5233
ROM Credits:
CodeElixir(took many fixes from his port)
Amogha
Erfan(for his tools)
Aspee(for the vold patch)
and many more sorry if I left any just pm me
XDA:DevDB Information
Oxygen OS for beryllium, ROM for the Xiaomi Poco F1
Contributors
adil.amin820@amog787
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.x
ROM Firmware Required: 9.6.10
Based On: ONEPLUS 6
Version Information
Status: Beta
Current Beta Version: 20
Beta Release Date: 2019-06-20
Created 2019-06-20
Last Updated 2019-06-20
Changelog V-2.O
Code:
Fixed Ambient(Pickup and Notification)
Fixed Screenshot bug
Fixed google Trusted Face
fixed Long screenshot
Fixed ctsProfile(Credits to Cyber & Lakshay)
Fixed Ok Google detection(Credits to Cyber & Lakshay)
Added OnePlus Eqalizer(Thanks To Amogha Maiya for porting)
Vendor Firmware updated to 9.6.20 beta
Download:
AFH:
https://androidfilehost.com/?fid=6006931924117901862
GDrive:
https://drive.google.com/folderview?id=1DXu-jDobji_d3fyp3d_S_kPMDXxwXqua
Mega:
https://mega.nz/#!nGA3UKZC!cq8KiFK6dVvdquXiNNNovoOWxCoEMz1UzqkhKOVOSQE
OpEqalizer force close fix:
Flash this zip
https://drive.google.com/file/d/1-HaufXU6j1SSb3z6xrPXDUPnHuEx0X-2/view?usp=drivesdk
New Oxygen OS port based on OnePlus 6t
Changelogs -
initial build based on latest stable 9.0.15
Auto Face Unlock by default
Fingerprint on display off fixed
Bugs-
IR face Unlock
Download:
GDrive:
https://drive.google.com/folderview?..._S_kPMDXxwXqua
Mirror:
MOD EDIT: PLING LINKS DELETED
AFH:
https://androidfilehost.com/?fid=6006931924117912090
Instructions for Flashing:
-Download the ROM*
-Backup everything.
-Wipe System, Data, Cache
-Do factory reset.(Optional: But this is recommended to avoid any issues)
-Flash the latest vendor (of your choice)
-Flash vendor patch(Flash this everytime you change vendor).
-Flash DFE(Optional: For those who dont need encryption)
-Flash ROM.zip
Notes:
1.After booting completes to install Google play services goto system/priv-app/gmscore and install the gmscore.apk
New Oxygen OS port for Pocophone is out based on Oneplus 6 beta 21
Changelogs from OnePlus:
System
•General bug fixes and stability improvements
Screen Recorder
•Added FPS option giving you more control over recording effects
Weather
•Improved scrolling experience for switching between pages
•Weather cards for multiple cities can now be rearranged or deleted by tapping and holding on them
•Optimized user experience by allowing you to use this app while app permission to access GPS location is disabled
Phone
•Better animation effects for switching between pages
•Improved experience with searching for contacts
•Optimized Quick Responses for declined calls and supported editing Quick Responses
Download:
https://www.androidfilehost.com/?w=files&flid=297019
MOD EDIT: PLING LINK DELETED
Instructions for Flashing:
-Download the ROM*
-Backup everything.
-Wipe System, Data, Cache
-Do factory reset.(Optional: But this is recommended to avoid any issues)
-Flash latest vendor+firmware (of your choice)
-Flash vendor patch(Flash this everytime you change vendor).
-Flash the downloaded OxygenOs_beta21_Rom.zip
-Flash DFE(Optional: For those who dont need encryption)
Bugs:
IR face unlock
Notes:
1.After booting completes install the latest Google play services arm64-v8a
OxygenOS 9.0.16 from OnePlus 6T
Changlogs:
-Aug sec patch
-IR fixed, but i didnt patch sysui for auto dismiss, cuz idc
-Ambient and Lift Up RIP cuz oneplus upto some new **** and i dun care about em either
-Thermals improved
-Power Profile modified and battery fixed (8h+ sot for normal users)
-Fixed setup
-Disabled Auto force encrytion no need to flash dfe with given vendor
-Custom Kernel will break jack, if you flash, idc, flash jack fix module
Download:
I will patch auto dismiss, volume on right, Ambient and 69 other stuff if i get enuf downloads(around 8k+) on this above link, but if you chose to mirror, then enjoy whats available and dont whine for fixes or future builds, idc.
Instructions:
> Wipe system, cache, dalvil and data
> Flash vendor
> Flash rom
> Flash magisk
Reboot and enjoy
Oxygen OS port based on Beta 24 from OnePlus 6
Changelog:
> IR Face Unlock fixed. Torch works as well by default
>August Security Patch
>Zen Mode fixed
>Incorrect Battery Capacity indication fixed
>Power Profiles fixed
>Thermals fixed
Changes from OnePlus:
System-
Optimized and made the screenshot taking process smoother and faster
General bug fixes and stability improvements
Updated Android security patch to 2019.08
Zen Mode-
Optimized visual effects
Added the additional setting to select the duration of time
Download:
Thread: https://forum.xda-developers.com/poco-f1/development/sgsi-oxygen-os-beryllium-t3941515
Instructions for Flashing:
-Download the ROM*
-Backup everything.
-Wipe System, Data, Cache
-Do factory reset.(Optional: But this is recommended to avoid any issues)
-Flash the Rom Zip.
-Flash vendor patch(Flash this everytime you change vendor).
-Flash DFE(Optional: For those who dont need encryption)
-After first boot install Gms Core apk to make Google services work.
MOD EDIT: One link to the telegram channel is enough. Thanks. -LTT
AnxCamera and Gcam Fix
Important info:
To make anx camera and gcam to work on oos change
ro.product.device=beryllium in system/build.prop
initially it's set to OnePlus 6
All credits to @XeonAX for the anxcam and this fix for oos
i thought the thread closed because of copyright policy. good to see the rom again. thanks man
How to download? Can't see any link.
2WildFirE said:
How to download? Can't see any link.
Click to expand...
Click to collapse
Patience?
DOWNLOADS
uploading.........
@op which version of 6? Version 9.0.6?
Daruwalla said:
Patience?
DOWNLOADS
uploading.........
Click to expand...
Click to collapse
First upload, then open thread. U can read it in xda rules.
Daruwalla said:
Patience?
DOWNLOADS
uploading.........
@op which version of 6? Version 9.0.6?
Click to expand...
Click to collapse
It's open beta 20
2WildFirE said:
First upload, then open thread. U can read it in xda rules.
Click to expand...
Click to collapse
Jesus? why so butthurt? I'm blind, care to share where it's mentioned in rules
https://forum.xda-developers.com/announcement.php?a=81
---------- Post added 21-06-2019 at 12:00 AM ---------- Previous post was 20-06-2019 at 11:58 PM ----------
anthraxisabeast said:
It's open beta 20
Click to expand...
Click to collapse
That's great news. I'm still holding on to CodeElixir build cause it's smooth af. I even asked him to release a build pvt with regular beta updates for some bucks ($10) but he didn't replied.
Can't wait to try this rom and support OP with few beers.
Thanks for your work in continuing the OOS port fo poco, cant wait to download
Daruwalla said:
Patience?
DOWNLOADS
uploading.........
@op which version of 6? Version 9.0.6?
Click to expand...
Click to collapse
OnePlus 6 beta 20
Another Great Developer With The Great ROM.
Salute You.
Ignore the Retard peoples.
Continue Your Work.
Thanks For This Oxygen OS ROM.
Nice! I'm excited for this ?
Jio native video calling working??
Daruwalla said:
Patience?
DOWNLOADS
uploading.........
@op which version of 6? Version 9.0.6?
Click to expand...
Click to collapse
OB20 from OP6
Thank you very much
Finally it goes on ..... thank you very much
low download speed
saintjimmy1984 said:
low download speed
Click to expand...
Click to collapse
Wait ,maybe
Daruwalla said:
Patience?
DOWNLOADS
uploading.........
@op which version of 6? Version 9.0.6?
Click to expand...
Click to collapse
subhamb7 said:
Jio native video calling working??
Click to expand...
Click to collapse
Patch link will be added soon for that

[AOSP][Treble][N950F/FD] hadesTreble [03.09.2019]

Disclaimer
I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in this ROM before flashing it! YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
Some personal thoughts:
- you should read everything from top to bottom of this first page at least - i won't offer support for any issues that were already mentioned;
- press 'Thanks' button instead of saying it - it will keep the thread clean and keep me motivated to do more;
- feel free to send me some coffee (which btw, runs out pretty quick), via paypal, if you want to support my work;
- if you take any of my work without my permission i'll report you, and you'll probably get banned.
Initial notes:
ONLY G950F / G950FD / G955F / G955FD / N950F / N950FD VARIANTS ARE SUPPORTED.
1. Don't forget to check bugs before any kind of questions
2. Since most of the GSIs are AOSP, forget about VoLTE, Knox features, Samsung apps, spen features, Camera mods or features, Iris or other Samsung related features.
3. The GCam we use in OneUI also doesn't work, i know, don't spam with "fix pls".
4. On Note 8 only one camera works, i want and i would like to fix that too, but i can't promise anything.
5. You can use any non-treble rom even if you have treble vendor installed, as long as you flash a non-treble kernel. The rom will ignore your vendor and everything will be as non treble.
* To go back to treble just flash vendor/treble kernel and the desired GSI.
* For the cases when you flashed back official twrp or reverted to normal - follow again all the "how to" steps, from below.
6. Not many kernels support treble now, don't try to flash/boot with others unless they specifically mention the kernel supports treble or you will drastically fail.
If any kernel dev wants to support this project feel free to reach me to provide some critical (ramdisk) patches.
General features:
- based on G965FXXU5CSGD August release
- Note8 files from N950FXXS7DSH1 - August release
- S8(+) files from G95*FXXS5DSH5 - August release
- Aroma vendor zip with selection of some things
- latest hadesKernel included with most of the features of OneUI kernel + other patches
- misc things enabled in framework overlay for better experience
- will update when i will remember
What works:
- everything else that's not listed under the bugs
General bugs:
- no signal bars shown (signal is fine tho) starting with mid-august builds signal bars are working
- fingerprint gestures
- touchscreen dies after a while with AOD/Ambient display always on (fixable with spamming power button 2-3 times)
How to convert to treble layout:
! make sure you are on latest official TWRP for your device (links in #2 post)
1) Download a PIE GSI from here, use ARM64, A only
2) Put GSI in internal storage
3) Reboot to recovery
4) Flash treble-convert zip
5) Reboot recovery
6) Flash downloaded GSI as image-system image
7) Reboot recovery
8) Flash treble-pie-vendor zip
9) Optional flash Magisk > 19.3
How to revert treble layout:
1) Reboot to recovery
2) Flash treble-revert zip
3) Reboot recovery
4) Wipe CACHE in twrp wipe menu
5) Flash any non treble rom or restore your previous twrp backup
Credits
@ananjaser1211
@prashantp01
@Noxxxious
@SuperR.
@jesec
@dron985
@phhusson
@ivanmeler
testers & donors
*please pm me if i forgot someone
XDA:DevDB Information
Project hadesTreble, Tool/Utility for the Samsung Galaxy Note 8 (2017 Phone)
Contributors
corsicanu
Source Code: https://github.com/corsicanu/android_kernel_samsung_universal8895/tree/treble
Version Information
Status: Beta
Current Beta Version: v0.4
Beta Release Date: 2019-09-03
Created 2019-07-31
Last Updated 2019-09-19
Reserved
Download links:
v0.4-treble-pie-vendor
v0.3-treble-pie-vendor
v0.2-treble-pie-vendor
v0.1-treble-pie-vendor
MEGA folder
Misc links
Telegram Support Group
Official TWRP for Note8
Official TWRP for S8/S8+
Latest Magisk stable or test/beta
O/P Bootloaders and modems
Reserved
You can find GSIs here , use ARM64, A only
Working GSIs and their bugs:
- phh AOSP - bootable, only general bugs
- phh Resurrection Remix - bootable, only general bugs
- EnesSastim AospExtended - bootable, only general bugs
- EnesSastim Pixel Experience Plus - bootable, only general bugs
- EnesSastim HavocOS - bootable, only general bugs
- peaktogoo Evolution X - bootable, only general bugs
- parags Evolution X - bootable, only general bugs
- ExpressLuke Evolution X - bootable, only general bugs (ril and brightness fixed)
- ExpressLuke HavocOS - bootable, only general bugs
- Vince31fr HavocOS 11.08.2019 - bootable, gapps needed, only general bugs
- ErfanGSI DirtyUnicorns - bootable, general bugs + advanced settings FC, stock cam crash, no account can be added
- Yey59 nitrOS - bootable, general bugs + stock camera crashing
- NFound DotOS (2019-04-09) - bootable, only general bugs
- Technical Bootleggers (2019-06-07) - bootable, only general bugs
- ErfanGSI MIUI Pie (2019-05-29) - bootable, brightness + general bugs + #miuifix
- king1990 Bliss (2019-04-05) - bootable, brightness + general bugs
- sixohtew OmniROM (2019-07-15) - bootable + general bugs
- Dil3mm4 Descendant (2019-07-10) - bootable + general bugs
- ErfanGSI Pixel Q beta 5 - bootable, general bugs + wifi (setup fails too because of this), fingerprint, storage, brightness slider, sdcard, low sound, bluetooth calls
- OxygenOS-Aonly-9-20190826-ErfanGSI - bootable after deleting "overlay" folder from /vendor, gms update needed, ril works, bugs: brightness, bt audio, face unlock, smart lock
- MIUI-9-20190831, bootable, general bugs + PlayStore and GMS update needed, BT don't pair, MI account, possible 2-3 reboots,
Not working GSIs and their bugs:
- ErfanGSI FlymeOs (2019-07-02) - not booting, black screen after bootsplash
- ErfanGSI ColorOS (2019-06-05) - not booting, infinity reboots at bootsplash
- ErfanGSI OxygenOS (2019-07-01) - not booting, infinity reboots at bootsplash
- ErfanGSI OxygenOS (2019-06-02/06) - not booting, stays at bootanimation
- ErfanGSI POSP (2019-05-30) - not booting, infinity reboots at bootsplash
- ErfanGSI Nubia (2019-06-05) - not booting, stays on bootanimation
- OnePlus7Pro5G (2019-07-06) - not booting, stays on bootanimation
- MacTavish ColorOS (2019-03-23) - not booting, stays on bootanimation
- ErfanGSI ZUI (2019-06-17) - bootable(?), black screen
- ErfanGSI OxygenOS Q (2019-07-29) - bootable(?), SystemUI crashes
- MIMAX3Global (20190802) Pie - booting, reboots every 3sec
- OnePlus7Hydrogen (20190725) - booting, SysUi crashing every 3sec
- OnePlus6THydrogen (20190807) - not booting
- OxygenOS 10 (20190808) Erfan - booting, black screen
Others might work too, test and report and i will update the list.
I strongly recommend using PIE built from source gsis, oem ported images might not boot at all or be filled with other bugs, i won't care of those, remember you are on Samsung, Exynos, on a ported vendor, if you want real/better treble, move to any other device/soc.
As for Q, ErfanGSI Pixel Q beta 5, but it has tons of unfixable bugs right now, flash at your own risk or wait for Q source to drop in order to become patch'able.
Special thanks for testing and contributing on updating the list to @ZcoderDEV, @AndrzejDwo, Pócs Márk, Shayan, @snikerfreak @Soydere and many other users, this place is too small to mention everyone.
FAQ (for later)
Great work as always corsi. this is big
Good job Mate
That is very big step. Thank you for your works.
Amazing alpha port
Thank you @corsicanu for your amazing work You're the best dev for the 8895 family :victory:
Now it's time to break the ice :
- Following your instructions, I was able to boot GSI in about five minutes.
- I chose to install Evolution X GSI (download link : https://sourceforge.net/projects/evolution-x/files/GSI), don't forget to choose A ONLY !
- When you reboot to boot for the first time, it's possible that your Note will reboot itself several times (for me it was 3 times, and it isn't a bootloop if you follow the OP installation).
- Every reboot you will be getting prompt saying you're having an internal problem with your device, don't worry it isn't the case.
- I experienced all the bugs you've mentionned. And don't let the battery discharge completly because you won't be able to charge it again in "offline mode" (thus I wonder if wireless charging will work in this mod but i don't have one to test unfortunately).
- Bluetooth isn't working, only the switcher in settings is. And in QP if you turn it on it will turn off 10 sec later. In settings there is a mention that your device isn't able to detect anthing around.
- NFC isn't working either. Everything seems to be fine (won't switch off by itself) but can't share something via Android Beam (Galaxy Note 3).
- Dual Boot Patcher isn't working, will end up in bootloop.
If you need help for testing just tell me
Once again, amazing job and well done :highfive:
Alek7 said:
Thank you @corsicanu for your amazing work You're the best dev for the 8895 family :victory:
Now it's time to break the ice :
- Following your instructions, I was able to boot GSI in about five minutes.
- I chose to install Evolution X GSI (download link : https://sourceforge.net/projects/evolution-x/files/GSI), don't forget to choose A ONLY !
- When you reboot to boot for the first time, it's possible that your Note will reboot itself several times (for me it was 3 times, and it isn't a bootloop if you follow the OP installation).
- Every reboot you will be getting prompt saying you're having an internal problem with your device, don't worry it isn't the case.
- I experienced all the bugs you've mentionned. And don't let the battery discharge completly because you won't be able to charge it again in "offline mode" (thus I wonder if wireless charging will work in this mod but i don't have one to test unfortunately).
- Bluetooth isn't working, only the switcher in settings is. And in QP if you turn it on it will turn off 10 sec later. In settings there is a mention that your device isn't able to detect anthing around.
- NFC isn't working either. Everything seems to be fine (won't switch off by itself) but can't share something via Android Beam (Galaxy Note 3).
- Dual Boot Patcher isn't working, will end up in bootloop.
If you need help for testing just tell me
Once again, amazing job and well done :highfive:
Click to expand...
Click to collapse
Nice and complete feedback, thanks for it.
However, try to reflash vendor, i used bluetooth on Evo X with car bluetooth for media and for calls so i can confirm it works. As for nfc, it worked for me as i use my phone to pay for things.
Sent from my SM-N950F using Tapatalk
v0.2 is up
Changelog:
fixed autobrightness thanks to @dron985
added gpu driver apps
How to install:
if you are already on a GSI and have v0.1 flashed, flash only vendor as a normal zip, (optional - flash Magisk > 19.3)
coming from any other setup - check first post install instructions.
Download:
Mega
Misc links
Telegram Support Group
Official TWRP for Note8
Official TWRP for S8/S8+
O/P Bootloaders and modems
Personal notes:
If you are new here, make sure you read everything from first page before messing with your phone.
Make sure you backup everything before flashing, things might not work as expected.
Regards!
ananjaser1211 said:
Great work as always corsi. this is big
Click to expand...
Click to collapse
You know you've done an good job when Anan himself drops by! This is big indeed! Thanks Corsi
Reflashed my Note with Odin and installed everything again with vendor v0.2, now Bluetooth and NFC are working properly
When installing or flashing the GSI as zip, an error message comes or do I need to unpack the file beforehand?
Shogunes said:
When installing or flashing the GSI as zip, an error message comes or do I need to unpack the file beforehand?
Click to expand...
Click to collapse
Unpack and flash image as system image.
Sent from my SM-N950F using Tapatalk
Following all the steps I installed RR image, the first time it stayed in the boot, then try again doing a format data and voila! Excellent Bluetooth connection with the car, camera OK and I almost feel no bugs. I do not know if it will be basic but just in case, the image is installed in System and do not forget to download Gapps ... Thank you very much.
Installed pixel experience gsi, works great, haven't experienced any new bugs yet.
Camera is ok.
GOD OF HADES!!! TRUE AND THE ONLY!!!
How many sleepless nights it had costed since first attempt 10 months ago, probably only Your Wife knows ? But as many @Eliteteam members' projects, which we know from the past (big KISS to @ananjaser1211 ?), also this one - EFFECTS ARE THE MOST IMPORTANT, time is not even a minor thing.
Big CONGRATS to You, smaller for the testers ? (but truly deserved) and the biggest THERE U GO for All that didn't have enough patience and FAITH.
Keep Exy8895 alive as long as possible (tho Ur new toy is already on the desk)!
Pls delete
I had already tried rr,nitrOs,nitrogen os,Havoc os,,octopus,dot os ,only rr, nitr n havoc can boot n just some bags.
Is there a way to install the beta of the Pixel with Android Q?

[AOSP][Treble][G95*F/FD] hadesTreble [03.09.2019]

Disclaimer
I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in this ROM before flashing it! YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
Some personal thoughts:
- you should read everything from top to bottom of this first page at least - i won't offer support for any issues that were already mentioned;
- press 'Thanks' button instead of saying it - it will keep the thread clean and keep me motivated to do more;
- feel free to send me some coffee (which btw, runs out pretty quick), via paypal, if you want to support my work;
- if you take any of my work without my permission i'll report you, and you'll probably get banned.
Initial notes:
ONLY G950F / G950FD / G955F / G955FD / N950F / N950FD VARIANTS ARE SUPPORTED.
1. Don't forget to check bugs before any kind of questions
2. Since most of the GSIs are AOSP, forget about VoLTE, Knox features, Samsung apps, spen features, Camera mods or features, Iris or other Samsung related features.
3. The GCam we use in OneUI also doesn't work, i know, don't spam with "fix pls".
4. On Note 8 only one camera works, i want and i would like to fix that too, but i can't promise anything.
5. You can use any non-treble rom even if you have treble vendor installed, as long as you flash a non-treble kernel. The rom will ignore your vendor and everything will be as non treble.
* To go back to treble just flash vendor/treble kernel and the desired GSI.
* For the cases when you flashed back official twrp or reverted to normal - follow again all the "how to" steps, from below.
6. Not many kernels support treble now, don't try to flash/boot with others unless they specifically mention the kernel supports treble or you will drastically fail.
If any kernel dev wants to support this project feel free to reach me to provide some critical (ramdisk) patches.
General features:
- based on G965FXXU5CSGD August release
- Note8 files from N950FXXS7DSH1 - August release
- S8(+) files from G95*FXXS5DSH5 - August release
- Aroma vendor zip with selection of some things
- latest hadesKernel included with most of the features of OneUI kernel + other patches
- misc things enabled in framework overlay for better experience
- will update when i will remember
What works:
- everything else that's not listed under the bugs
General bugs:
- no signal bars shown (signal is fine tho) starting with mid-august builds signal bars are working
- fingerprint gestures
- touchscreen dies after a while with AOD/Ambient display always on (fixable with spamming power button 2-3 times)
How to convert to treble layout:
! make sure you are on latest official TWRP for your device (links in #2 post)
1) Download a PIE GSI from here, use ARM64, A only
2) Put GSI in internal storage
3) Reboot to recovery
4) Flash treble-convert zip
5) Reboot recovery
6) Flash downloaded GSI as image-system image
7) Reboot recovery
8) Flash treble-pie-vendor zip
9) Optional flash Magisk > 19.3
How to revert treble layout:
1) Reboot to recovery
2) Flash treble-revert zip
3) Reboot recovery
4) Wipe CACHE in twrp wipe menu
5) Flash any non treble rom or restore your previous twrp backup
Credits
@ananjaser1211
@prashantp01
@Noxxxious
@SuperR.
@jesec
@dron985
@phhusson
@ivanmeler
testers & donors
*please pm me if i forgot someone
XDA:DevDB Information
Project hadesTreble, Tool/Utility for the Samsung Galaxy S8
Contributors
corsicanu
Source Code: https://github.com/corsicanu/android_kernel_samsung_universal8895/tree/treble
Version Information
Status: Beta
Current Beta Version: v0.4
Beta Release Date: 2019-09-03
Created 2019-07-31
Last Updated 2019-09-19
Reserved
Download links:
v0.4-treble-pie-vendor
v0.3-treble-pie-vendor
v0.2-treble-pie-vendor
v0.1-treble-pie-vendor
MEGA folder
Misc links
Telegram Support Group
Official TWRP for Note8
Official TWRP for S8/S8+
Latest Magisk stable or test/beta
O/P Bootloaders and modems
Reserved
You can find GSIs here , use ARM64, A only
Working GSIs and their bugs:
- phh AOSP - bootable, only general bugs
- phh Resurrection Remix - bootable, only general bugs
- EnesSastim AospExtended - bootable, only general bugs
- EnesSastim Pixel Experience Plus - bootable, only general bugs
- EnesSastim HavocOS - bootable, only general bugs
- peaktogoo Evolution X - bootable, only general bugs
- parags Evolution X - bootable, only general bugs
- ExpressLuke Evolution X - bootable, only general bugs (ril and brightness fixed)
- ExpressLuke HavocOS - bootable, only general bugs
- Vince31fr HavocOS 11.08.2019 - bootable, gapps needed, only general bugs
- ErfanGSI DirtyUnicorns - bootable, general bugs + advanced settings FC, stock cam crash, no account can be added
- Yey59 nitrOS - bootable, general bugs + stock camera crashing
- NFound DotOS (2019-04-09) - bootable, only general bugs
- Technical Bootleggers (2019-06-07) - bootable, only general bugs
- ErfanGSI MIUI Pie (2019-05-29) - bootable, brightness + general bugs + #miuifix
- king1990 Bliss (2019-04-05) - bootable, brightness + general bugs
- sixohtew OmniROM (2019-07-15) - bootable + general bugs
- Dil3mm4 Descendant (2019-07-10) - bootable + general bugs
- ErfanGSI Pixel Q beta 5 - bootable, general bugs + wifi (setup fails too because of this), fingerprint, storage, brightness slider, sdcard, low sound, bluetooth calls
- OxygenOS-Aonly-9-20190826-ErfanGSI - bootable after deleting "overlay" folder from /vendor, gms update needed, ril works, bugs: brightness, bt audio, face unlock, smart lock
- MIUI-9-20190831, bootable, general bugs + PlayStore and GMS update needed, BT don't pair, MI account, possible 2-3 reboots,
Not working GSIs and their bugs:
- ErfanGSI FlymeOs (2019-07-02) - not booting, black screen after bootsplash
- ErfanGSI ColorOS (2019-06-05) - not booting, infinity reboots at bootsplash
- ErfanGSI OxygenOS (2019-07-01) - not booting, infinity reboots at bootsplash
- ErfanGSI OxygenOS (2019-06-02/06) - not booting, stays at bootanimation
- ErfanGSI POSP (2019-05-30) - not booting, infinity reboots at bootsplash
- ErfanGSI Nubia (2019-06-05) - not booting, stays on bootanimation
- OnePlus7Pro5G (2019-07-06) - not booting, stays on bootanimation
- MacTavish ColorOS (2019-03-23) - not booting, stays on bootanimation
- ErfanGSI ZUI (2019-06-17) - bootable(?), black screen
- ErfanGSI OxygenOS Q (2019-07-29) - bootable(?), SystemUI crashes
- MIMAX3Global (20190802) Pie - booting, reboots every 3sec
- OnePlus7Hydrogen (20190725) - booting, SysUi crashing every 3sec
- OnePlus6THydrogen (20190807) - not booting
- OxygenOS 10 (20190808) Erfan - booting, black screen
Others might work too, test and report and i will update the list.
I strongly recommend using PIE built from source gsis, oem ported images might not boot at all or be filled with other bugs, i won't care of those, remember you are on Samsung, Exynos, on a ported vendor, if you want real/better treble, move to any other device/soc.
As for Q, ErfanGSI Pixel Q beta 5, but it has tons of unfixable bugs right now, flash at your own risk or wait for Q source to drop in order to become patch'able.
Special thanks for testing and contributing on updating the list to @ZcoderDEV, @AndrzejDwo, Pócs Márk, Shayan, @snikerfreak @Soydere and many other users, this place is too small to mention everyone.
FAQ (for later)
This is just the best thing that happen to our S8!!!
You are a genius!!! Forgot to root but I'll go ahead and do that just now, Evolution X flashed!
Bluetooth working great with my headset, wifi perfect, data connection perfect, so far nothing major to report but its clearly state that bugs or whatever belong to the thread of the rom flashed by anyone.
Nice!!!!! ?
Few of my favorite quotes:
Code:
[I]"fake
you will never have any proper treble on s8 lmao
not oem treble = fake treble = ****ing useless
waste of time" [/I] - [B]A[/B]ndroid[B]C[/B]losed[B]S[/B]ource[B]P[/B]roject dev
Goodjob on finally releasing it. Looks like the best thing that has happened to S8 besides my kernel :victory:
Thanks for this and keep up the good work
Man this is such good news for this Phone, this open a whole new world for ROMS and such, really thanks OP for doing this!
Screenshots please?
Thank you so much for this !!! Best thing that have ever happened!!
mrjoy said:
Screenshots please?
Click to expand...
Click to collapse
the post #5 have screenshots
What the ****?
How can you be so good?
You were a genius with Hades Rom that was my main rom.
Now you're a LEGEND.
Bless your heart and soul man.
Have a great Life.
GENTLEMEN..... that's a big victory...
i am stuck at Galaxy S8 screen, did everything as mentioned... i even updated TWRP to latest official 3.3.1 and updated modem and boot loader to G950FXXU4DSE4 , any help will be appreicated
kariem9495 said:
i am stuck at Galaxy S8 screen, did everything as mentioned... i even updated TWRP to latest official 3.3.1 and updated modem and boot loader to G950FXXU4DSE4 , any help will be appreicated
Click to expand...
Click to collapse
Reflash convert zip and vendor zip.
Sent from my SM-N950F using Tapatalk
How to install?
Edit - when I try to install the GSI my TWRP doesn't recognize the img file, what I have to do to solve it? Any help will be very grateful! Cheers guys! :laugh:
LU SONEVESSO said:
How to install?
Edit - when I try to install the GSI my TWRP doesn't recognize the img file, what I have to do to solve it? Any help will be very grateful! Cheers guys! :laugh:
Click to expand...
Click to collapse
Tap on install image so the .img files show which is the extension of the image system you're looking for
---------- Post added at 07:22 AM ---------- Previous post was at 07:17 AM ----------
A fast review of this project :
1- this project is 99.5% complete.
2- No major bugs, only general bugs that are mentioned in the post and they aren't really that important to be honest.
3-Make sure you follow the installation steps by the letter, and make sure you're downloading the right system image for our device.
4-If you get no sim card after rebooting, do a "soft reebot" , normal rebooting didn't fix the problem for me.
5-Battery life is perfect, i feel it is even better than OneUI.
kariem9495 said:
A fast review of this project :
1- this project is 99.5% complete.
2- No major bugs, only general bugs that are mentioned in the post and they aren't really that important to be honest.
3-Make sure you follow the installation steps by the letter, and make sure you're downloading the right system image for our device.
4-If you get no sim card after rebooting, do a "soft reebot" , normal rebooting didn't fix the problem for me.
5-Battery life is perfect, i feel it is even better than OneUI.
Click to expand...
Click to collapse
Oh wow that sounds really good, that gives me ton of hope for newer ROMs when Samsung ends supporting the S8/S8+
Holy ****! I never knew I would live this day Anyways:
- phh's ResurrectionRemix works fine, except the brightness is completely dead on that build, I wasn't able to control it via the slider.
- phh's AOSP just stuck at the Samsung logo and rebooting, I tried installing it twice, without any success.
- Evolution X is the perfect one. The very small bug I found (well, for someone maybe a big one) but taking a photo/video in a 3rd party app (Messenger, Facebook, Instagram) is very choppy for me, every second it freezes for a small time. Maybe @corsicanu can say anything about this issue. Everything else (but the known bugs) are working FLAWLESSLY. I LOVE IT.

[UNOFFICIAL] BootleggersROM Q Mod //qiDroid

BootleggersROM 5.2
Your warranty is now void!
We're not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this ROM
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at us for messing up your device, we will laugh at you​
qiDroid is a project which based on BootleggersROM with @phhusson's Treble GSI patches. Built without "ALLOW_MISSING_DEPENDENCIES=true" flag. And system can run with SELinux enforced state, as original Phh AOSP GSI. Fully compatible with PHH-Treble patches exclude one low level change: by default exist file /system/phh/secure (for Google Certification PASS), so if you can boot AOSP or LineageOS GSI, but can't boot qiDroid - try to removing that file
UPDATE VERSION
latest build: 2020.10.21
treble patches: v222+
SPL: 5 Oct 2020
FEATURES/CHANGES
• no in-built root, activated SafetyNet tweak
• Phh Setting moved to bottom of all settings (please don't be scare)
• in default launcher added double tap for screen-off gesture
• added 0.2x, 0.8x and 1.2x to the animation speed selection menu
• by default set 0.8x animation speed
• fixed cropped by edges status bar (GSI specific)
• disabled "Customize your Pixel device" and other annoying suggestions
• tuning status bar, icons more tightly to each other
• fixed error when uninstalling some programs (when plugged SD-card with vFAT FS)
• added option "Swipe for notifications" for fingerprint scanner
• few changes to reduce consumed resources - more space, more speed, more battery life
• disabled some disputable Google components, for sample is fixed overall WiFi speed in the aggregate with GPS + Bluetooth
• on my device (with stock vendor) Google Play certification passed without any patches and Magisk, just works out-of-the-box
• added options to set system UI optimization level, test them manually on your device for speed/battery improvements (use careful, do not set IPS level for OLED)
• Gapps variants: used normal webview (no errors to installing Chrome), stock launcher with Google Feed (and without crappy search bar)
• Dialer from CAOS: option to set fullscreen contact's photo, small theme fixes, translations, call recording (not supports on all devices)
• replaced apps: Gallery, Keyboard, Dialer, Messaging, Contacts, Calculator - all supports dark theme
• on battery saver auto dark mode disabled, you can choose light/dark theme
• fixed offline charger for some devices (mostly Qualcomm, few MTK)
• in stock camera removed HAL3 green artefacts which exist on some Xiaomi devices
• fixed status info of security patches (GSI specific)
• removed ugly divider lines in Settings UI (not all of them)
• updated Redmi 6 Pro overlay
• for Mi A2 Lite LTE is set by default
• added USB-tethering QS tile
• Bromite webview
• fixed notch hider (GSI specific)
• lock icon disabled
• OOS style switches
• enabled LiveDisplay by default
• fixed boot on Mi 10 (Lite), K30 (Pro)
• added Russian translation (more than 95%)
• tweaks for Xiaomi Redmi 9 'lancelot' and Redmi Note 9 'merlin' (audiojack, brightness, fp touches)
• changed minimal brightness level for Redmi Note 8 Pro
• initial Redmi 9 'galahad' overlay
• added DT2W support for QIN 2
• added custom Google Cloud restore option (Settings > Accounts)
*grayed options not realized yet
DOWNLOAD (CL1CK HERE)
vanilla, gapps: all architectures
NAMING
Some information you should know about knowing what type of gsi it is
<ARCH>_xyZ
<ARCH> can either be arm, a64 (arm32_binder64) or arm64
x can either be a or b
y can either be v, o, g or f
Z can be N or S
b = a/b
a = a-only
g = gapps
o = gapps-go
v = vanilla (no gapps included)
f = floss (free & open source apps instead gapps)
N = no superuser
S = superuser included
so in most common example "arm64_avN" is ARM64 A-only vanilla with no superuser
CONTACTS
> telegram group
> project page
KN0WN BUGS
• excluding fixes, the same as on all Q GSI (in some cases doesn't work: broadcasting on TV, calls via BT; offline charging does not work normally; problems with GPS etc etc)
NOTE: always test ROM first without Magisk (with clean boot.img). and don't send me bug reports if you have:
a) Magisk installed
b) modified/custom vendor or kernel
c) dirty flashing rom without wiping data
d) modified props values (another device fingerprint and so on)
CREDITS
persons: @phhusson
projects: TrebleGSI • BlissROMs • crDroid • PixelExperience • ION • neon-OS • Havoc-OS • LineageOS • Evolution-X • LiquidRemix • ExtendedUI • GrapheneOS • abc rom
re
2re
eremitein said:
2re
Click to expand...
Click to collapse
Ty ty
TYTY!Bootleggers is my favorite ROM and I couldn't wait for a Q GSi!
Update (2020.08.23)​
same base and treble patches
added option to set statusbar edges padding
fixed cropped font in network traffic monitor
fixed SELinux status info (GSI specific)
DOWNLOAD //all architectures​
Ok one question my phone can't read .xz how to flash with twrp
Aulgreg38 said:
Ok one question my phone can't read .xz how to flash with twrp
Click to expand...
Click to collapse
Something called extracting...
Op3t
I understand that but my pc says the files corrupt and won't open it?? If u could tell me if I must change settings in pc to fix that???
Aulgreg38 said:
I understand that but my pc says the files corrupt and won't open it?? If u could tell me if I must change settings in pc to fix that???
Click to expand...
Click to collapse
Zarchiver app in Google Play Store:
https://play.google.com/store/apps/details?id=ru.zdevs.zarchiver
Op3t
Thank u so much I'm not quite a pro at the pc yet
Aulgreg38 said:
I understand that but my pc says the files corrupt and won't open it?? If u could tell me if I must change settings in pc to fix that???
Click to expand...
Click to collapse
use PeaZip next time very nice extractor on win
Ty for this bootleggers, really smooth. But i get adb unauthorized tho. I see official bootleggers update their base to 5.2 hope it will come to qidroid with September spl. Thanks
alvinprimo said:
Ty for this bootleggers, really smooth. But i get adb unauthorized tho
Click to expand...
Click to collapse
try disable & enable adb debugging in developer settings
or use that
[ if rom not allowing adb (device unauthorized) ]
0. reboot to twrp
1. connect phone to the PC
2. run command from
*nix: adb push ~/.android/adbkey.pub /data/misc/adb/adb_keys
windows: adb push C:\Users\%PutHereYourUsername%\.android\adbkey.pub /data/misc/adb/adb_keys
eremitein said:
try disable & enable adb debugging in developer settings
or use that
[ if rom not allowing adb (device unauthorized) ]
0. reboot to twrp
1. connect phone to the PC
2. run command from
*nix: adb push ~/.android/adbkey.pub /data/misc/adb/adb_keys
windows: adb push C:\Users\%PutHereYourUsername%\.android\adbkey.pub /data/misc/adb/adb_keys
Click to expand...
Click to collapse
Thanks for the tip, but I get no such file (or folder) output, what's wrong? I use minimal adb/fastboot on windows. Btw why you're not upload new qidroid build here? Thank for the you're Smith rom
Update (2020.09.29)​
BootleggersROM version 5.2
merged September SPL missing patches
added few patches from GrapheneOS
enabled LiveDisplay by default
fixed boot on Mi 10 (Lite), K30 (Pro)
added Russian translation (more than 95%)
have ARM A-only Go (1.5+Gb)
reworked Speed UI overlays
default AOSP bootanimation (for more generic)
Bromite WebView 85.0.4183.110
DOWNLOAD //all architectures​
Thanks so much for this rom, very stable and with nice options!
I noticed that after flashing the rom (arm64-bvn) my system partition with 3 GB size shows a file system size of about 1.8 GB, so to be able to flash open gapps afterwards I had to use the TWRP option "resize file system" to get the full size back. As this is my first GSI-rom, can you briefly explain why the file system size is shrinked during installation? Thank you.
retora said:
Thanks so much for this rom, very stable and with nice options!
I noticed that after flashing the rom (arm64-bvn) my system partition with 3 GB size shows a file system size of about 1.8 GB, so to be able to flash open gapps afterwards I had to use the TWRP option "resize file system" to get the full size back. As this is my first GSI-rom, can you briefly explain why the file system size is shrinked during installation? Thank you.
Click to expand...
Click to collapse
GSI system have possible minimal size, it's not a specific rom for your device only which shoild be support full size of partition. so yes it's normal when you need resizing
eremitein said:
GSI system have possible minimal size, it's not a specific rom for your device only which shoild be support full size of partition. so yes it's normal when you need resizing
Click to expand...
Click to collapse
Great Job Great ROM thank You
Update (2020.10.21)​
latest phh treble patches
latest BootleggersROM 5.2 sources
up to October SPL (really, all mandatory patches came in September)
this release with "secure" file and without su/Superuser (most people voted)
tweaks for Xiaomi Redmi 9 'lancelot' and Redmi Note 9 'merlin' (audiojack, brightness, fp touches)
changed minimal brightness level for Redmi Note 8 Pro
initial Redmi 9 'galahad' overlay
added DT2W support for QIN 2
added custom Google Cloud restore option (Settings > Accounts)
Bromite WebView 85.0.4183.110 (newest version have bug when downloading something)
DOWNLOAD //all architectures​

[OFFICIAL] BlissROMs R Mod //BLESS11

BlissROMs 14.2
Your warranty is now void!
We're not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this ROM
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at us for messing up your device, we will laugh at you​
BLESS 11 is a project which based on BlissROMs 14.x with @AndyYan's and @phhusson's Treble GSI patches. Built with some Andy's patches & recommendations, also even without "ALLOW_MISSING_DEPENDENCIES=true" flag. And system can run with SELinux enforced state, as original Phh AOSP GSI. Fully compatible with PHH-Treble patches. Has dynamic root which can be activated/deactivated without reboot - 'su' binary and SuperUser app (can works on all devices even with system read-only). Also has dynamic SafetyNet helper (but it compatible not with all devices), users have four ways to pass SafetyNet: a. just enable SafetyNet option (recommended) b. disable SafetyNet and enable "Spoof Pixel 5" then reboot c. enable both options and reboot d. mount system as RW and create empty file /system/phh/secure (legacy method), and in the Recovery do Wipe Data or Factory reset
UPDATE VERSION
base: BlissROMs 14.2
latest build: 2021.05.02
treble patches: v306
SPL: 5 April 2021
FEATURES/CHANGES
see Project page changelog
DOWNLOAD (CLICK H3RE)
vanilla, gapps, go-gapps: all possible architectures
NAMING
Some information you should know about knowing what type of gsi it is
<ARCH>_xyZ
<ARCH> can either be arm, a64 (arm32_binder64) or arm64
x can either be a or b
y can either be v, o, g or f
Z can be N or S
b = a/b
a = a-only
g = gapps
o = gapps-go
v = vanilla (no gapps included)
f = floss (free & open source apps instead gapps)
N = no superuser
S = superuser included
Z = dynamic superuser included
-lite = for VNDK Lite vendors (also can help with broken camera even on normal VNDK vendors)
so in most common example "arm64_avZ" is ARM64 A-only vanilla with dynamic superuser
CONTACTS
> telegram group
> project page
KN0WN BUGS
• excluding fixes, the same as on all R GSI (in some cases doesn't work: broadcasting on TV, calls via BT; offline charging does not work normally etc etc)
NOTE: always test ROM first without Magisk (with clean boot ramdisk). and don't send me bug reports if you have:
a) Magisk installed
b) modified/custom vendor or kernel
c) dirty flashing rom without wiping data
d) modified props values (another device fingerprint and so on)
CREDITS
persons: @phhusson, @AndyYan, @electrikjesus
projects: TrebleGSI • BlissROMs • crDroid • LineageOS • Havoc-OS • GrapheneOS • ABC rom • PixelExperience • SyberiaOS • Evolution-X
reserved_one
reserved_two
awesomeness
Excelent work
This gsi smooth and stable, but i guess bliss team not put all cuztomise setting yet. And they change from lineage to aosp with this version
Hi folks, as you maybe know all my GSI works suspended
Build server damaged and now for maintenance, I haven't information about his further fate
So... I don't know when I can resume my GSI building
By the way, this is not my server, literally I can't do anything to help
I can't even send money, my country is not supported in many payment systems
If you want to help, you can send donations to https://www.paypal.com/paypalme/electrikjesus
(he is the owner of the server, and he long gives me his server - I made a lot of GSI builds on it)
I have a Blackview BV9600E phone, and ROM file "bless-v306-210502-arm64-bgZ.img" runs perfect.
Only has a little thing that was aviable on previous revision: LED NOTIFICATIONs has no control, so I must install a led control APK from Google PlayStore (LIGHT FLOW).
Also, System Camera is very poor, but runs perfectly.
The problem I cannot solve is aviable Gpaid to use NFC, because it detects "non original ROM", because I think I have not rooted system.
We are expecting new revision (Like Samsung has yet new beta).
Many thanks.
juandi34 said:
The problem I cannot solve is aviable Gpaid to use NFC, because it detects "non original ROM", because I think I have not rooted system.
Click to expand...
Click to collapse
try this:
SafetyNet Pass needed for many things, this is an important feature of Android. It needed for Play Store certification, GPay etc. Some apps (like bank clients) even can't run if SafetyNet broken
In my nowadays GSIs users have three normal ways to pass SafetyNet (always clean Google Play market data after changes)
a. just enable SafetyNet option (recommended) - and don't forget disable SuperUser first!
b. enable also "Spoof Pixel 5" (leave SafetyNet enabled) and reboot
c. create empty file /system/phh/secure with root file manager and reboot (if your device support RW system access)
eremitein said:
try this:
SafetyNet Pass needed for many things, this is an important feature of Android. It needed for Play Store certification, GPay etc. Some apps (like bank clients) even can't run if SafetyNet broken
In my nowadays GSIs users have three normal ways to pass SafetyNet (always clean Google Play market data after changes)
a. just enable SafetyNet option (recommended) - and don't forget disable SuperUser first!
b. enable also "Spoof Pixel 5" (leave SafetyNet enabled) and reboot
c. create empty file /system/phh/secure with root file manager and reboot (if your device support RW system access)
Click to expand...
Click to collapse
Also, there is another problem I have missed on the last message:
Call Recording options does not appears on this rom.
I must install an APK to record it (using ROOT to works fine).
But 4PDA friends, tell me that it must appears on this rom: What´s happend ?
juandi34 said:
Also, there is another problem I have missed on the last message:
Call Recording options does not appears on this rom.
I must install an APK to record it (using ROOT to works fine).
But 4PDA friends, tell me that it must appears on this rom: What´s happend ?
Click to expand...
Click to collapse
call record should 100% works only with AOSP Dialer, not with Google one
eremitein said:
call record should 100% works only with AOSP Dialer, not with Google one
Click to expand...
Click to collapse
How can I install AOSP Dialer ????
It is not included in the ROM file, because I cannot see
Is it on a patch file to patch via TWRP ???
I have found it on https://github.com/A2HI2H/Aosp_Dialer_With_Call_Recording
... may I install via TWRP this version and may works 100% ???
Thank you.
eremitein said:
try this:
SafetyNet Pass needed for many things, this is an important feature of Android. It needed for Play Store certification, GPay etc. Some apps (like bank clients) even can't run if SafetyNet broken
In my nowadays GSIs users have three normal ways to pass SafetyNet (always clean Google Play market data after changes)
a. just enable SafetyNet option (recommended) - and don't forget disable SuperUser first!
b. enable also "Spoof Pixel 5" (leave SafetyNet enabled) and reboot
c. create empty file /system/phh/secure with root file manager and reboot (if your device support RW system access)
Click to expand...
Click to collapse
It doesn´t works.
I try and the error is keep going.
juandi34 said:
How can I install AOSP Dialer ????
It is not included in the ROM file, because I cannot see
Is it on a patch file to patch via TWRP ???
Click to expand...
Click to collapse
it's included in the vanilla rom build
(but some gapps can override it)
also in gappsed build there is Google dialer
juandi34 said:
It doesn´t works.
I try and the error is keep going.
Click to expand...
Click to collapse
sad, is it works in the another gsi?
eremitein said:
sad, is it works in the another gsi?
Click to expand...
Click to collapse
It works in the original ROM.
eremitein said:
it's included in the vanilla rom build
(but some gapps can override it)
also in gappsed build there is Google dialer
Click to expand...
Click to collapse
So:
Do you think, if I install from:
https://sourceforge.net/projects/nikgapps/files/Releases/Addons-R/27-Jun-2021/ the NikGapps-Addon-11-GoogleDialer-signed.zip file, it may works ???
juandi34 said:
So:
Do you think, if I install from:
https://sourceforge.net/projects/nikgapps/files/Releases/Addons-R/27-Jun-2021/ the NikGapps-Addon-11-GoogleDialer-signed.zip file, it may works ???
Click to expand...
Click to collapse
no, it's Google dialer
juandi34 said:
So:
Do you think, if I install from:
https://sourceforge.net/projects/nikgapps/files/Releases/Addons-R/27-Jun-2021/ the NikGapps-Addon-11-GoogleDialer-signed.zip file, it may works ???
Click to expand...
Click to collapse
no, it's Google dialer
-------------------------------
eremitein​Can you share in this forum the correct APK or ZIP to install via APK or TWRP ???
juandi34 said:
no, it's Google dialer
-------------------------------
eremitein​Can you share in this forum the correct APK or ZIP to install via APK or TWRP ???
Click to expand...
Click to collapse
which apk?

Categories

Resources