Now my black shark Can no longer enter normal use. Which I already tried to follow this instruction. But still unable to recover Did I do anything wrong or steps wrong? Help me.
I have downloaded it all. G66X1901140OS00MPX
from this post
[Help needed]Fixing OTA on BlackShark 1 Global
Hello (hopefully) Black Shark Owner, Unfortunately, it seems that rooting the Black Shark prevents the ability to use OTA on the phone. What i need, is your help: if you have a Black Shark on G66X1901082OS00MPX, Please reply to this thread. I...
forum.xda-developers.com
and use fastboot for flash to black shark
fastboot flash abl_a abl_a.img
fastboot flash aop_a aop_a.img
fastboot flash bluetooth_a bluetooth_a.img
fastboot flash boot_a boot_a.img
fastboot flash cmnlib_a cmnlib_a.img
fastboot flash cmnlib64_a cmnlib64_a.img
fastboot flash custom_a custom_a.img
fastboot flash devcfg_a devcfg_a.img
fastboot flash dsp_a dsp_a.img
fastboot flash dtbo_a dtbo_a.img
fastboot flash hyp_a hyp_a.img
fastboot flash keymaster_a keymaster_a.img
fastboot flash mdtpsecapp_a mdtpsecapp_a.img
fastboot flash modem_a modem_a.img
fastboot flash qupfw_a qupfw_a.img
fastboot flash storsec_a storsec_a.img
fastboot flash system_a system_a.img
fastboot flash vbmeta_a vbmeta_a.img
fastboot flash vendor_a vendor_a.img
fastboot flash xbl_a xbl_a.img
fastboot flash xbl_config_a xbl_config_a.img
[Edit]
I have try Slot A is not work ... and i have try flash to slot B again is OK work!
My black shark back to life!
Thanks,
Related
hello friends ??
I am from Peru looking for yesterday from several corners of the web I found the stock ROM of the #MotoXplay ..well I now use a #MotoZplay but I also have a #MotoXplay very well preserved ..
watching on your Sim tray I noticed that there was the sim2 slot obviously blocked by my telephone operator.
the ROM I found is dual SIM and is for the region latam
I download and install it .. so far goes very well with its short 2gb ram I leave the steps and the link + the commands and some screenshots..
And yes, now I have 2 IMEI..
although it does not read the sim2 there will be some solution later.
Sorry for my bad English..
This my first post..
:V
The process is with ADb_Fastboot
ROM stock 7.1.1.
https://androidfilehost.com/?fid=889964283620759436
Commands
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot oem fb_mode_clear
fastboot reboot
Screenshots
https://pin.it/VMEIdiO
https://pin.it/1VEnQkP
https://pin.it/UiIcyiO
https://pin.it/8ea8tfO
sorry but still not loading images xda
https://forum.xda-developers.com/chef-central/android/install-android-nougat-7-1-1-official-t3691943
Perfect & Thanks!
You are awesome, no problems on an xt1563, only the commands:
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
they give error, but they are not problem to install the update. :good::good::good::good:
elvizpdx said:
looking for yesterday from several corners of the web I found the stock ROM
Click to expand...
Click to collapse
It was published already, a day before your post.
Stock firmware for most variants can be found here: https://mirrors.lolinet.com/firmware/moto/parker/official/
These seem to work as my device still works after flashing the appropiate firmware for my device multiple times.
Any idea if I can easily change software channel? I want to try and replace US Retail with EU or generic one to see if the issue with Hotspot on AT&T goes away...
dgcom said:
Any idea if I can easily change software channel? I want to try and replace US Retail with EU or generic one to see if the issue with Hotspot on AT&T goes away...
Click to expand...
Click to collapse
How about QPST Flash Tool? I haven't tried it yet for myself, but according to this site: https://rootmydevice.com/download-qpst-flash-tool/ should be possible.
Hi,
What are the steps to reflshing stock firmware? I want to unlock my bootloader and flash Magisk to root my One Zoom, just in case I get a bootloop I want to flash stock, any help is appreciated, thx
Debren said:
How about QPST Flash Tool? I haven't tried it yet for myself, but according to this site: https://rootmydevice.com/download-qpst-flash-tool/ should be possible.
Click to expand...
Click to collapse
Thank you, looks very interesting, will check it out.
Someone had success flashing the motorcycle one zooom xt-2010-1 I tried it I made the steps of the command line with abd fastboot and load the files but when restarting the phone turns on and off a few times and the same room is installed somebody has been able to do it since I want to change the software channel regards
bypepe said:
Someone had success flashing the motorcycle one zooom xt-2010-1 I tried it I made the steps of the command line with abd fastboot and load the files but when restarting the phone turns on and off a few times and the same room is installed somebody has been able to do it since I want to change the software channel regards
Click to expand...
Click to collapse
Mine is at retbr, but I flashed retail and its fine, the device still reports as retbr but the other firmware is installed for sure, no bloatware and reports as 29.59-49-8 and retbr stopped at 29.59-49-5
Jaysmith696 said:
Hi,
What are the steps to reflshing stock firmware? I want to unlock my bootloader and flash Magisk to root my One Zoom, just in case I get a bootloop I want to flash stock, any help is appreciated, thx
Click to expand...
Click to collapse
The Steps are:
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash vbmeta vbmeta.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot flash bluetooth BTFM.bin
fastboot flash dsp dspso.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash dtbo dtbo.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash system system.img_sparsechunk.10
fastboot flash system_b system_b.img_sparsechunk.0
fastboot flash system_b system_b.img_sparsechunk.1
fastboot flash system_b system_b.img_sparsechunk.2
fastboot flash oem oem.img
fastboot flash oem_b oem_other.img
fastboot flash vendor vendor.img_sparsechunk.0
fastboot flash vendor vendor.img_sparsechunk.1
fastboot flash vendor vendor.img_sparsechunk.2
fastboot erase carrier
fastboot erase userdata
fastboot erase ddr
fastboot reboot bootloader
After bootloader is rebooted: fastboot reboot
---------- Post added at 07:11 PM ---------- Previous post was at 07:08 PM ----------
dgcom said:
Any idea if I can easily change software channel? I want to try and replace US Retail with EU or generic one to see if the issue with Hotspot on AT&T goes away...
Click to expand...
Click to collapse
I reflashed original Amazon-Version Device using RetailEU
Software Channel stays at Amazon
dau999 said:
I reflashed original Amazon-Version Device using RetailEU
Software Channel stays at Amazon
Click to expand...
Click to collapse
Nice! Maybe I'll try that at one point, but the issue I had with original firmware was fixed by Motorola...
dau999 said:
The Steps are:
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash vbmeta vbmeta.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot flash bluetooth BTFM.bin
fastboot flash dsp dspso.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash dtbo dtbo.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash system system.img_sparsechunk.10
fastboot flash system_b system_b.img_sparsechunk.0
fastboot flash system_b system_b.img_sparsechunk.1
fastboot flash system_b system_b.img_sparsechunk.2
fastboot flash oem oem.img
fastboot flash oem_b oem_other.img
fastboot flash vendor vendor.img_sparsechunk.0
fastboot flash vendor vendor.img_sparsechunk.1
fastboot flash vendor vendor.img_sparsechunk.2
fastboot erase carrier
fastboot erase userdata
fastboot erase ddr
fastboot reboot bootloader
After bootloader is rebooted: fastboot reboot
---------- Post added at 07:11 PM ---------- Previous post was at 07:08 PM ----------
I reflashed original Amazon-Version Device using RetailEU
Software Channel stays at Amazon
Click to expand...
Click to collapse
DANGER!! XT2010-1_PARKER_RETEU_9.0_PPHS29.59-51-6_subsidy-DEFAULT_regulatory-XT2010-1-EUROPE_CFC.xml has newer bootloader!!!
you will not be able to switch back to
XT2010-1_PARKER_AMZEU_9.0_PPHS29.59-49-5_subsidy-DEFAULT_regulatory-XT2010-1-EUROPE_CFC.xml
Android 10
[email protected]
I flashed PARKER_RETAIL_10_QPH30.29-Q3-28-13_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml
being on XT2010-1_PARKER_RETEU_9.0_PPHS29.59-51-13_subsidy-DEFAULT_regulatory-XT2010-1-EUROPE_CFC.xml
and all on a amazon device.
Everything went well!! Here the command lines to use:
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash vbmeta vbmeta.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot flash bluetooth BTFM.bin
fastboot flash dsp dspso.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash dtbo dtbo.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash system system.img_sparsechunk.10
fastboot flash system system.img_sparsechunk.11
fastboot flash system_b system_b.img_sparsechunk.0
fastboot flash system_b system_b.img_sparsechunk.1
fastboot flash oem oem.img
fastboot flash oem_b oem_other.img
fastboot flash vendor vendor.img_sparsechunk.0
fastboot flash vendor vendor.img_sparsechunk.1
fastboot flash vendor vendor.img_sparsechunk.2
fastboot erase carrier
fastboot erase userdata **exclude if you want to keep your data**
fastboot erase ddr
fastboot reboot bootloader
Fastboot reboot
dau999 said:
[email protected]
I flashed PARKER_RETAIL_10_QPH30.29-Q3-28-13_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml
being on XT2010-1_PARKER_RETEU_9.0_PPHS29.59-51-13_subsidy-DEFAULT_regulatory-XT2010-1-EUROPE_CFC.xml
and all on a amazon device.
Everything went well!! Here the command lines to use:
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash vbmeta vbmeta.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot flash bluetooth BTFM.bin
fastboot flash dsp dspso.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash dtbo dtbo.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash system system.img_sparsechunk.10
fastboot flash system system.img_sparsechunk.11
fastboot flash system_b system_b.img_sparsechunk.0
fastboot flash system_b system_b.img_sparsechunk.1
fastboot flash oem oem.img
fastboot flash oem_b oem_other.img
fastboot flash vendor vendor.img_sparsechunk.0
fastboot flash vendor vendor.img_sparsechunk.1
fastboot flash vendor vendor.img_sparsechunk.2
fastboot erase carrier
fastboot erase userdata **exclude if you want to keep your data**
fastboot erase ddr
fastboot reboot bootloader
Fastboot reboot
Click to expand...
Click to collapse
How to upload Android 10?
I have a PLAYPL version and would like to upload RETAIL.
Please help.
wiktorrent said:
How to upload Android 10?
I have a PLAYPL version and would like to upload RETAIL.
Please help.
Click to expand...
Click to collapse
unlock your bootloader, and flash via fastboot
Hi,
thanks for the instructions. Saved my brand new moto one zoom after I tried to install an unofficial lineage rom which left it completely unusable.
But I came to wonder, that I now cannot use twrp anymore. neither the latest official parker-build 3.3.4.0-0 nor the 3.3.1-6 build from mauronofrio are working anymore. Both did before all the flashing.
My best guess is, that those builds are incompatible with either the boot.img or the bootloader.img from PARKER_RETAIL_10_QPH30.29-Q3-28-13_subsidy-DEFAULT_regulatory-DEFAULT_CFC.
Did you guys encounter this as well?
Were you able to lock the bootloader again or install another twrp-Version?
Do you work with banking-apps on that phone after installing this rom?
Cheers
Hey everyone
My motorola one deen xt 1941-4 64GB PVT1 is not starting up
its just giving error Start Up Failed
Its just starting up in bootloader mode with locked oem and AP Fastboot Flash Mode (Secure).
Not going into recovery
not going into factory mode
Can you plz help me out to solve it plz
nashi_jee said:
Hey everyone
My motorola one deen xt 1941-4 64GB PVT1 is not starting up
its just giving error Start Up Failed
Its just starting up in bootloader mode with locked oem and AP Fastboot Flash Mode (Secure).
Not going into recovery
not going into factory mode
Can you plz help me out to solve it plz
Click to expand...
Click to collapse
Are you familiar with flashing moto firmware with fastboot.exe ?
Did it install an update recently?
Sent from my mata using XDA Labs
sd_shadow said:
Are you familiar with flashing moto firmware with fastboot.exe ?
Did it install an update recently?
Click to expand...
Click to collapse
Not much familiar but know some basics.
No it did not install any update.
My wife just powered it off during a call and when tried to turn it on it showed up with the message
I have tried to unlock bootloader but it requires developer option to be turned on.
Simply I can follow the instructions if you provide some.
And thanks for reply buddy
nashi_jee said:
Not much familiar but know some basics.
No it did not install any update.
My wife just powered it off during a call and when tried to turn it on it showed up with the message
I have tried to unlock bootloader but it requires developer option to be turned on.
Simply I can follow the instructions if you provide some.
And thanks for reply buddy
Click to expand...
Click to collapse
I would start with
Motorola smart assistant
It has a recovery option
There's a link in my
Moto Drivers, Firmware, RSD Lite, and other Unbricking Tools
Sent from my mata using XDA Labs
sd_shadow said:
I would start with
Motorola smart assistant
It has a recovery option
There's a link in my
Moto Drivers, Firmware, RSD Lite, and other Unbricking Tools
Click to expand...
Click to collapse
I have already tried this LMSA. It shows its model in recovery option i.e xt1941-4. But when I try to recover it ends up with MODEL NOT SUPPORTED
Waiting for reply / solution from any expert please.
nashi_jee said:
Waiting for reply / solution from any expert please.
Click to expand...
Click to collapse
You could flash firmware but if you don't flash the correct firmware for the software channel on the device it won't work.
Usually the software channel is the named for the carrier or region.
https://mirrors.lolinet.com/firmware/moto/deen/official/
You can flash the firmware with fastboot.exe
Setting up and Using adb.exe and fastboit.exe https://forum.xda-developers.com/android/general/index-links-setting-using-adb-fastboot-t3495167
The flashing commands should be
Code:
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash modem_a NON-HLOS.bin
fastboot flash fsg_a fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot flash dsp_a adspso.bin
fastboot flash logo_a logo.bin
fastboot flash boot_a boot.img
fastboot flash dtbo_a dtbo.img
fastboot flash system_a system.img_sparsechunk.0
fastboot flash system_a system.img_sparsechunk.1
fastboot flash system_a system.img_sparsechunk.2
fastboot flash system_a system.img_sparsechunk.3
fastboot flash system_a system.img_sparsechunk.4
fastboot flash system_a system.img_sparsechunk.5
fastboot flash system_a system.img_sparsechunk.6
fastboot flash system_a system.img_sparsechunk.7
fastboot flash system_a system.img_sparsechunk.8
fastboot flash system_a system.img_sparsechunk.9
fastboot flash system_b system_b.img_sparsechunk.0
fastboot flash system_b system_b.img_sparsechunk.1
fastboot flash system_b system_b.img_sparsechunk.2
fastboot flash vendor_a vendor.img_sparsechunk.0
fastboot flash vendor_a vendor.img_sparsechunk.1
fastboot flash oem_a oem.img
fastboot flash oem_b oem_other.img
fastboot erase userdata
fastboot erase DDR
fastboot oem fb_mode_clear
fastboot reboot
Another option would be trying to switch a/b system
Hoping that the non active partition is bootable.
Some instructions about that in my adb thread.
Sent from my mata using XDA Labs
---------- Post added at 05:58 PM ---------- Previous post was at 05:57 PM ----------
Switching active system partition is the easiest
If the bootloader will even allow the commands
It may not.
Sent from my mata using XDA Labs
Thanx to help me.
But I am confused.
Can you plz help me through team viewer or wonething like that if you dont mind
sd_shadow said:
You could flash firmware but if you don't flash the correct firmware for the software channel on the device it won't work.
Usually the software channel is the named for the carrier or region.
https://mirrors.lolinet.com/firmware/moto/deen/official/
You can flash the firmware with fastboot.exe
Setting up and Using adb.exe and fastboit.exe https://forum.xda-developers.com/android/general/index-links-setting-using-adb-fastboot-t3495167
The flashing commands should be
Code:
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash modem_a NON-HLOS.bin
fastboot flash fsg_a fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot flash dsp_a adspso.bin
fastboot flash logo_a logo.bin
fastboot flash boot_a boot.img
fastboot flash dtbo_a dtbo.img
fastboot flash system_a system.img_sparsechunk.0
fastboot flash system_a system.img_sparsechunk.1
fastboot flash system_a system.img_sparsechunk.2
fastboot flash system_a system.img_sparsechunk.3
fastboot flash system_a system.img_sparsechunk.4
fastboot flash system_a system.img_sparsechunk.5
fastboot flash system_a system.img_sparsechunk.6
fastboot flash system_a system.img_sparsechunk.7
fastboot flash system_a system.img_sparsechunk.8
fastboot flash system_a system.img_sparsechunk.9
fastboot flash system_b system_b.img_sparsechunk.0
fastboot flash system_b system_b.img_sparsechunk.1
fastboot flash system_b system_b.img_sparsechunk.2
fastboot flash vendor_a vendor.img_sparsechunk.0
fastboot flash vendor_a vendor.img_sparsechunk.1
fastboot flash oem_a oem.img
fastboot flash oem_b oem_other.img
fastboot erase userdata
fastboot erase DDR
fastboot oem fb_mode_clear
fastboot reboot
Another option would be trying to switch a/b system
Hoping that the non active partition is bootable.
Some instructions about that in my adb thread.
Sent from my mata using XDA Labs
---------- Post added at 05:58 PM ---------- Previous post was at 05:57 PM ----------
Switching active system partition is the easiest
If the bootloader will even allow the commands
It may not.
Sent from my mata using XDA Labs
Click to expand...
Click to collapse
I tried RSD Lite last night and successfully flashed the firmware but the problem still exists.
Everything gone good then why its not back into life?
One more thing I am thinking that the firmware folder does not contain any recovery file. Is it normal?
nashi_jee said:
You could flash firmware but if you don't flash the correct firmware for the software channel on the device it won't work.
Usually the software channel is the named for the carrier or region.
https://mirrors.lolinet.com/firmware/moto/deen/official/
You can flash the firmware with fastboot.exe
Setting up and Using adb.exe and fastboit.exe https://forum.xda-developers.com/android/general/index-links-setting-using-adb-fastboot-t3495167
The flashing commands should be
I tried RSD Lite last night and successfully flashed the firmware but the problem still exists.
Everything gone good then why its not back into life?
One more thing I am thinking that the firmware folder does not contain any recovery file. Is it normal?
Click to expand...
Click to collapse
Recovery is part of the boot.img now
Sent from my mata using XDA Labs
sd_shadow said:
Recovery is part of the boot.img now
Click to expand...
Click to collapse
It finishes successfully but again comes up with same error
i face same problem you solve that problem or still not?
Same problem
Hey guys. Wait please I'm working for your blank flash for your device . Recently I worked two models before . Check this coming soon I'll add your model.
https://forum.xda-developers.com/one-vision/how-to/start-failed-motorola-one-macro-t4082275/amp/
still No luck mate.
yehison said:
Hey guys. Wait please I'm working for your blank flash for your device . Recently I worked two models before . Check this coming soon I'll add your model.
https://forum.xda-developers.com/one-vision/how-to/start-failed-motorola-one-macro-t4082275/amp/
Click to expand...
Click to collapse
Should I try this method for Motorola XT1941-4?
I made this list because I needed it and didn't see one around here.
If anyone can use it, here it is with a link to the firmware.
Taylor made for the XT2117 Moto G Power 2021 (borneo).
lolinet mirrors - firmware, software, iso etc.
lolinet mirrors - powered by h5ai
mirrors.lolinet.com
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash vbmeta vbmeta.img
fastboot flash radio radio.img
fastboot flash bluetooth BTFM.bin
fastboot flash dsp dspso.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash dtbo dtbo.img
fastboot flash recovery recovery.img
fastboot flash super super.img_sparsechunk.0
fastboot flash super super.img_sparsechunk.1
fastboot flash super super.img_sparsechunk.2
fastboot flash super super.img_sparsechunk.3
fastboot flash super super.img_sparsechunk.4
fastboot flash super super.img_sparsechunk.5
fastboot flash super super.img_sparsechunk.6
fastboot flash super super.img_sparsechunk.7
fastboot flash super super.img_sparsechunk.8
fastboot erase carrier
fastboot erase userdata
fastboot erase metadata
fastboot erase ddr
fastboot oem fb_mode_clear
fastboot reboot
Download this Firmware -> https://mega.nz/file/JRFUwbpY#gsn5SmaPBpND5Vfredrm5sFJx6tWzegS67v2YDYvfjA
Put Firmware Files in your platform tools folder
CMD into the platform tools directory (if you don't know what that means,. then you are a NOOB LOL)
type
Fastboot devices
output: phone detected ? yes then proceed if no then you need to fix that
copy and paste all this in fastboot
fastboot flash --disable-verity --disable-verification vbmeta_system vbmeta_system.img
fastboot flash --disable-verity --disable-verification vbmeta vbmeta.img
fastboot flash --disable-verity --disable-verification vbmeta_vendor vbmeta_vendor.img
fastboot flash metadata metadata.img
fastboot flash userdata userdata.img
fastboot flash engineering_cdt engineering_cdt.img
fastboot flash bluetooth bluetooth.img
fastboot flash dsp dspso.bin
fastboot flash boot boot.img
fastboot flash dtbo dtbo.img
fastboot flash core_nhlos core_nhlos.bin
fastboot flash featenabler featenabler.mbn
fastboot flash vendor_boot vendor_boot.img
fastboot flash splash splash.img
fastboot flash oplus_sec oplus_sec.mbn
fastboot flash apdp apdp.mbn
fastboot flash toolsfv tools.fv
fastboot flash logfs logfs_ufs_8mb.bin
fastboot flash storsec storsec.mbn
fastboot flash oplusreserve2 oplusreserve2.img
then type fastboot reboot.
be patient
or if its bootlooping let me know.
i dont have a cph variant.
these commands above where tested in Gn2200
Theatrically it should still work for CPH
NOTES: I FIND IT Odd THAT THIS METHOD DEBRICKED my DEVICE to a success boot to HOMESCREEN without having too flash the critical PARTION NOR THE SUPER
I have the decrypted .ofp file. It doesn't give product.img, system.img, odm.img, and a couple others and everytime I unpack it, it corrupts some of the .img files. It also gives three supers. If you can get all of the raw files without corruption and post them, I'd be grateful.
TweakybirdsTheWord said:
I have the decrypted .ofp file. It doesn't give product.img, system.img, odm.img, and a couple others and everytime I unpack it, it corrupts some of the .img files. It also gives three supers. If you can get all of the raw files without corruption and post them, I'd be grateful.
Click to expand...
Click to collapse
Ya all those files are in the super.img . You gotta use simg2img to merge the parted supers then unpack that super
Well then. I'll, uh...I'll try that very simple sounding idea. My old college professor is laughing at me.
Decrypting the ofp takes like 20 minutes
Have you the merged super.img? I haven't had a chance to do it yet.
TweakybirdsTheWord said:
Have you the merged super.img? I haven't had a chance to do it yet.
Click to expand...
Click to collapse
redacted
How to use this
killerex said:
How to use this
Click to expand...
Click to collapse
redacted
I have one plus Nord n20 5g version is this compatible
killerex said:
I have one plus Nord n20 5g version is this compatible
Click to expand...
Click to collapse
Do you have the Gn2200 or the chp variant?
Chp
killerex said:
Chp
Click to expand...
Click to collapse
Then it should be compatible. . Is your device bricked and bootloader unlocked?
The guide wont be ready tonight maybe tomorrow.
Yes
redacted
bricklife4me said:
What was the lastest update you did to phone and how did you brick your phone.?
Click to expand...
Click to collapse
Latest update..I was trying to root it..I guess flashed wrong boot.img
killerex said:
Latest update..I was trying to root it..I guess flashed wrong boot.img
Click to expand...
Click to collapse
redacted
bricklife4me said:
here are the commands to flash in fast boot d
fastboot flash devcfg_a devcfg.mbn
fastboot flash devcfg_b devcfg.mbn
fastboot flash dsp_a adspso.bin
fastboot flash dsp_b adspso.bin
fastboot flash bluetooth_a BTFM.bin
fastboot flash bluetooth_b BTFM.bin
fastboot flash modem_a NON-HLOS.bin
fastboot flash modem_b NON-HLOS.bin
fastboot flash pmic_a pmic.elf
fastboot flash pmic_b pmic.elf
fastboot flash rpm_a rpm.mbn
fastboot flash rpm_b rpm.mbn
fastboot flash splash splash.img
fastboot flash tz_a tz.mbn
fastboot flash tz_b tz.mbn
fastboot flash xbl_a xbl.elf
fastboot flash xbl_b xbl.elf
fastboot flash abl_a abl.elf
fastboot flash abl_b abl.elf
fastboot flash boot_a boot.img
fastboot flash boot_b boot.img
fastboot flash dtbo_a dtbo.img
fastboot flash dtbo_b dtbo.img
fastboot flash super super.img
fastboot flash vendor_a vendor.img
fastboot flash vendor_b vendor.img
fastboot flash vbmeta_a vbmeta.img
fastboot flash vbmeta_b vbmeta.img
fastboot erase userdata
to get to fastboot you have to adb the below command
adb reboot fastboot
Click to expand...
Click to collapse
How can I flash all this command in one flash?
bricklife4me said:
Did you pull your own boot image?
Click to expand...
Click to collapse
No I got from telegram.
killerex said:
No I got from telegram.
Click to expand...
Click to collapse
Lol probably from my Channel