Hey, I've had the watch for close to three years
After sudden use it started to crash.
Which is charging it works great, as soon as I unplug it after a few minutes it just crashes and shuts down
Related
I have tried to connect POLAR WEARLINK+ BLUETOOTH with TS by Endomodo, it was working at the first time.
But it won't connect again now. it shows "connecting failed"
I have reboot both TS and sensor, put out the battery, but no luck.
Do you have any idea?
saisquare said:
I have tried to connect POLAR WEARLINK+ BLUETOOTH with TS by Endomodo, it was working at the first time.
But it won't connect again now. it shows "connecting failed"
I have reboot both TS and sensor, put out the battery, but no luck.
Do you have any idea?
Click to expand...
Click to collapse
I have also come across similar problems with Polar + TrueSmart + Endomodo combo. It is really buggy sometimes. Usually this works:
Turn on bluetooth on TrueSmart,
wait about 5-10 seconds,
launch Endomondo,
wait about 10-20 seconds,
turn on the wearlink, and
wait...
Or when the combo is really buggy:
Turn on bluetooth on TrueSmart,
remove the TrueSmart-Polar pairing on the Bluetooth settings,
Turn off bluetooth on TrueSmart,
wait about 5-10 seconds,
turn on bluetooth on TrueSmart,
wait about 5-10 seconds,
launch Endomondo,
wait about 10-20 seconds, and
turn on the wearlink, and
wait...
ADD: Try to remove the Polar pairing from the Endomondo settings... It might help. Also, make sure that you are wearing the Polar correctly. The contacting surface can be a bit cumbersome.
My android wear watch won't stay connected to my Z5C. I've tried reseting the watch, and the phone is stock. The watch will stay connected to my Note 5 so I know it works. The watch seems to disconnect when I connect my phone to my Bluetooth headset. Then I have to factory reset the watch and pair it again.
Any ideas?
Sent from my E5823 using Tapatalk
Which watch?? there seems to have some bluetooth issues for specific BT devices, i think you can only wait 6.0 to fix it.
Lg GWR
Sent from my E5823 using Tapatalk
ofsinreno said:
My android wear watch won't stay connected to my Z5C. I've tried reseting the watch, and the phone is stock. The watch will stay connected to my Note 5 so I know it works. The watch seems to disconnect when I connect my phone to my Bluetooth headset. Then I have to factory reset the watch and pair it again.
Any ideas?
Sent from my E5823 using Tapatalk
Click to expand...
Click to collapse
I use moto 360 2015, every thing works well
Old thread, I know, but while my 2nd gen Moto 360 works fine with my Z5c, I'm having weird issues where things are delayed, or the pause button doesn't work while playing music. I'll press pause on the notification on my watch, and it'll change to a play button, but my phone won't respond or notice that I paused it for up to 20 minutes. If I go and pause it on my phone, about 20 minutes later it'll start playing once the toggle actually makes it to my phone. After wiping data, and resetting the watch entirely the issue was resolved for a few days, but now it's back
Hey all, I recently traded in my V20 for a new G6.
I've got a 2016 Honda Civic and am having serious issues with Android Auto. Every time i plug in, it will play audio for about 10 minutes and then disconnect. Once I reconnect it will be about 10 seconds to 1 minute before it disconnects again if it connects at all. After clearing app data in AA i usually can get it to stay for about 10 minutes and then it does it again.
I know it's not the cable because i've tested both the cable that i was using with my v20 and also the one that came as a charging cable for the g6.
I have tried turning on USB debugging and also have tried all three USB connection modes.
This is super frustrating especially because for some reason (even though my v20 played audio just fine) the g6 and civic combo will only connect bluetooth for voice and not for media (without crashing.)
Anyone else experience this??
Sorry I can't help. It works fine on my Tesla.
I have what might be a similar issue. I don't get disconnects but on my 2017 Chevy Colorado, if I turn off the truck with the phone still connected to USB (for example, a quick stop at a gas station), after I restart the truck, G6 audio doesn't work at all. I have to reboot. I've tried force-stopping Waze, Pandora, and Android Auto; disconnecting and reconnecting USB; and even going into airplane mode (my phone hitchhikes on the truck's WiFi)... nothing works except a reboot. Literally the only thing I don't like about the G6.
Android Auto was flawless on my previous Nexus 6P ... but it went into bootloop and became a $700 paperweight.
I'm having similar issues with my G6 and AAuto in a 17Civic Hatchback My 1st drive of the day is usually ok But 2nd and thereafter drives no matter how much time in between The radio or music play pauses randomly whether it's a music player on Bluetooth sub Amazon music Pandora even Sirius radio I brought it in for service 4 times they tell me it's the phone or settings on the phone finally got a tech to see what's going on long story shorter they just replaced the entire radio/android system with latest android update well guess what same old same old still doing it very frustrating I had an LG G3 prior and for the most part no issues So is it a G6 thing Android Auto thing or Honda thing??? I also tried 4 or 5 different music player apps that are compatible with AA
When pressing the play button on any music player while connected to my 2017 Civic, it instantly crashes the bluetooth application. Oddly enough, for some reason the YouTube Music application can play multiple tracks without issue as long as you're using a playlist and keeping the screen off while doing so. I don't think that Android Auto is the problem, because it works perfectly fine via USB port and always allows me to interface with the application on my Civic's touchscreen panel. However, I am glad to see that I'm not the only one with this issue so maybe there will be a fix hopefully somewhere down the line.
Sent from my VS988 using Tapatalk
So I have an amazfit bip connected to the s9 plus but I am facing one weirded issues after few days the watch disconnects automatically and I have to reset network settings on my s9 plus and then it connects works for few days then again the same initially I thought the issue is with phone but my car Bluetooth and my bose speaker works fine with out any issues
Same issue here, using P20pro and BIP.. I havent seen any repeatable action regarding this, it just occasionally disconnects. I've got a watch face that shows connection status and sometimes it changes from connected to disconnected and back but Amazfit app shows "disconnected".
Isn't BIP supposed to work with MFit instead of Amazfit? Remove the companion app and Bluetooth from any battery saving on your phone.
Hi there.
I recently bought a pair of Amazfit Verge Lite.
One of these suddenly stopped working, it just remains in bootloop as you can see in the video attached [the other one just starts fine].
It does vibrate at power button press, shows the Amazfit logo, and then dims it for a while before showing it once more for a few seconds. Then repeat..
Is there anything I could do to revive it?
TIA.