Djuganight |
#4
Hello,
Hi, I have a new xiaomi tv box s on my lg and philips tv's and I enable the hdmi cec both.
On mi box settings I also enable the choice for "one key play" and "one key power off".
When I want to turn on both mi box and tv, it works, but when I want to power off both mi box and tv, it closes only the mi box.
I also have a older Xiaomi Mi Box S that works perfectly with both TV's, so I went back to the shop and replaced the new box but the issue remains.
I can't find any differences between the older box and the 2 new boxes other than the words in the back.
Could it be something related to the hardware or bad implementation of firware?
Or is there a way to download and clean install the a firmware to see if solves this issue?
It's extremely annoying!
Same, I have sony bravia.
Mibox turn on the tv butbit doesn't turn it off, sometimes it will work.and actually turn off the tv but only in rare ocasions, I guess iasue is that the miboxs doesn't turn off at all when pressing the power on the remote it just sleep. Because when I restart the mibox4 it will turn off the TV and turn it back on after few seconds
Related
I'm new to Android TV boxes i recently bought a MXQ S85 But it keeps turning my TV off when watching it. It's as if the TV has crashed, normally when the TV is switched off there will be a little led which tells you it in standby this doesn't come on. The only way to get the TV back on is turn turn the Android box off. I can't change sources turn the volume up or change the channel. I've tired loads of different things but nothing seems to work.
What I've tried.
3 x HDMI Leads
4 x HDMI Ports
2 x MXQ S85 boxes
removing batteries from MXQ S85 remote control
Disable HDMI CEC
AV cable which come with MXQ S85
Changing the resolution and the refresh rates
I have tried a different TV and the MXQ S85 works fine with no problems. Has anyone got any ideas of what it might be?
In the past ive always watched my Sony TV using my (Vu Duo/Vix) Satellite Box and when ive turned off the satellite box its switched off the TV (setting in HDMI CEC setup).
Since I plugged in my new MXQ Android Box this no longer happens, I have to switch off the TV & Satellite boxes separately.
It doesnt seem to matter which Sony TV HDMI port my MXQ is plugged into, as long as its plugged in my Satellite Box has lost control of this function. (Nb. my MXQ is not powered up).
I also have a NOW TV box and this doesnt interfere in the way the MXQ does. This is all very strange to me.
Anyone else have this experience and can tell me how to deal with it?
Can no-one help me here? Is there somewhere else I would be better off posting this question?
switchable HDMI splitter box? maybe?
Sent from my SM-G920F using XDA-Developers mobile app
Hi guys, i've just bought a new Huawei honor i7 but wifi direct / screen mirroring doesn't work. The tv is a sony bravia, and my other huawei p7 connects to the tv without any issues, all my other devices and those of my friends and family also connect to the tv with 1 only tap.
I've reset the tv, still the same problem.
I've updated the huawei honor, still the same problem.
This is definitely a huawei issue, but i don't know how to solve this one.
The phone doesn't connect through "multi display" sometimes it does say connect on the device while the tv jumps back to the wifi direct screen, and the phone loses the supposed connection (because it never was really connected in the first place)
I've paired the phone through the manual wifi direct settings on the tv, but nothing.
I've tried all the possible solutions i could think of and find, is there any way to fix the phone?
I bet a screen mirroring patch such as that for samsung will fix this issue. But obviously that patch isn't applicable on huawei.
Anyone?
Hi,
I have xiaomi tv box, but when I play any video from any app like youtube, netflix, audio is faster then video. Sometimes delay is 0.5 seconds, and sometimes 1-2 seconds
Is there any solution? And does everyone has this problem or just some versions?
Do you have an a/v receiver in the middle between mibox and tv?
bigtalker said:
Do you have an a/v receiver in the middle between mibox and tv?
Click to expand...
Click to collapse
No I don't have any. I have only wifi router that is connected with tv box. I also tested on different TV on multiple houses, but same issue.
If you type on google xiaomi tv box out of sync, or xiaomi tv box sound out of sync, you will find many reports.
It's strange when I contact xiaomi support from us, they said they never heard about this issue, even if it's very common when you search on google :/
solution that works
nedimx2 said:
Hi,
I have xiaomi tv box, but when I play any video from any app like youtube, netflix, audio is faster then video. Sometimes delay is 0.5 seconds, and sometimes 1-2 seconds
Is there any solution? And does everyone has this problem or just some versions?
Click to expand...
Click to collapse
I just found the solution, just follow the steps in below link!
tsentas.net/xiaomi-mi-tv-box-3-netflix-audio-video-out-of-sync/
In my case, that solution probably helped to reduce the frequency of the problem, but the problem still persists.
In my case The mi box 3 is connected via HDMI to my Samsung sound bar, and it is connect via HDMI to my Samsung TV.
It seems, that the order of powering up the tree devices, can impact the sound delay...
What i do most of the time is press and hold the power button of mi box and restart the device. It usually solves the problem, but no always.
hello,
The box is alfawize H96Pro plus, 3G/32G, green board, stock ROM.
I do need this function, when I power on the tv box, it turns my TV on and switches the input source to the box. To make auto-switching works, I have to enable "HDMI CEC" and "One Touch Play" functions.
But after I enabled those, the box keeps switching the tv input port to itself.
When I turn my tv on, the box turns on itself and switches the input source. If I switch the input source to another HDMI port, the box switches it back.
I need it to switch input ONLY at the moment I turn the box on.
And when I turn my tv on, I don't need the box to turn itself on.
Anyone knows how to fix this?
I found an app called "Amlogic TV Box tool" in Google Play, which has an option called "CEC keep-alive".
I don't know it is related or not. I'm going to try it later.
And if anyone knows how to program a app to change CEC settings, could you tell me how?
An API, a sysfs file or a config file will be enough.
I could learn other nessesery knowleage by myself.
Thanks.