Related
It won't update through my phone, and kies is a piece of **** so I'm trying to use Odin, but can't find the file I need to use with it. Thanks.
I've found the firmware thread but not sure which one to use.
Try on sammobile. com
www.samfirmware.com is the link you want.
You will need to register to download, just type in the phone model in the search bar on the site and it will list all roms country specific for your phone.
sgabytzu said:
Try on sammobile. com
Click to expand...
Click to collapse
graemeg said:
www.samfirmware.com is the link you want.
You will need to register to download, just type in the phone model in the search bar on the site and it will list all roms country specific for your phone.
Click to expand...
Click to collapse
Ditto
Sent from my GT-P7510 using xda premium
You could also use Check Fus to find and download your current stock firmware. It might be simpler then selecting the correct firmware yourself
Once again, here's the latest firmware to Bootloader 4 for the AT&T S7. Bit the bullet and paid $16 again for this download as well.
Big thanks for TLopez1973 and MgarBm for the support!
Again, use with the modified Odin in the root thread for best results
BL: https://drive.google.com/open?id=0B2xxd5WoIhEwWlIzQmtxYlppenc
AP: https://drive.google.com/open?id=0B2xxd5WoIhEwWVlpVDJ5Y3kzdlE
CP: https://drive.google.com/open?id=0B2xxd5WoIhEwTG1abmtIQ2VFcm8
CSC: https://drive.google.com/open?id=0B2xxd5WoIhEwYUFsOUlPenFaX3M
Your contributions to the community are profound, thank you very much sir! I very recently used your U firmware to unroot my phone. Since I had the Sept bootloader, I take it this should flash fine and I will get my at&t functionality back?
iscream612 said:
Your contributions to the community are profound, thank you very much sir! I very recently used your U firmware to unroot my phone. Since I had the Sept bootloader, I take it this should flash fine and I will get my at&t functionality back?
Click to expand...
Click to collapse
Yes sir. I'm running now, back to a fully AT&T Stock S7
TTT. Everything's uploaded and ready
Where did you get this firmware from? I'm 100% desperate for the Galaxy S7 Edge AT&T variant Odin files for this same firmware.
joe3681 said:
Once again, here's the latest firmware to Bootloader 4 for the AT&T S7. Bit the bullet and paid $16 again for this download as well.
Again, use with the modified Odin in the root thread for best results
BL: https://drive.google.com/open?id=0B2xxd5WoIhEwWlIzQmtxYlppenc
AP: https://drive.google.com/open?id=0B2xxd5WoIhEwWVlpVDJ5Y3kzdlE
CP: https://drive.google.com/open?id=0B2xxd5WoIhEwTG1abmtIQ2VFcm8
CSC: https://drive.google.com/open?id=0B2xxd5WoIhEwYUFsOUlPenFaX3M
Click to expand...
Click to collapse
From a Persian site that somehow seems to have all the firmwares nobody else has.
If you're desperate then DL and flash it. That's what it's here for
Thank you! I have been looking for this since the U firmware updated to V4.
joe3681 said:
From a Persian site that somehow seems to have all the firmwares nobody else has.
If you're desperate then DL and flash it. That's what it's here for
Click to expand...
Click to collapse
I cant flash it as i have the edge variant. The files are different
hey joe thanks for this put up that paypal links on your profile so i can send u a beer bud and thanks again
I put my PayPal in my profile. That'd be awesome thanks! I'll be sure to give you a shoutout for it
Easton999GS said:
I cant flash it as i have the edge variant. The files are different
Click to expand...
Click to collapse
This is the site, the link is specifically G935A. If you signup and purchase a download package there's an option of 4 downloads for $16. That was you can DL all the files you need. IDK who runs this site but it's been a blessing!http://a2phone.ir/index.php?file=/Samsung Flash Files/G Series/G935A - Galaxy S7 Firmware
beer on confirmation # 7LB84750GV1258233
joe3681 said:
This is the site, the link is specifically G935A. If you signup and purchase a download package there's an option of 4 downloads for $16. That was you can DL all the files you need. IDK who runs this site but it's been a blessing!http://a2phone.ir/index.php?file=/Samsung Flash Files/G Series/G935A - Galaxy S7 Firmware
Click to expand...
Click to collapse
Joe, you are the man brother!
Thank you very much.
Now we just need the G891A Firmware Rev 2 for my collection. LOL
---------- Post added at 12:02 AM ---------- Previous post was at 12:00 AM ----------
Here is the link for the G935A Rev 4 FIrmware as well. Its already here in xda as well.
http://forum.xda-developers.com/att-s7-edge/how-to/firmware-pi2-s7-edge-sm-g935a-10-03-16-t3477246
Thank you for the files
G930aucs4api2
joe3681 said:
Once again, here's the latest firmware to Bootloader 4 for the AT&T S7. Bit the bullet and paid $16 again for this download as well.
Big thanks for TLopez1973 for the support!
Again, use with the modified Odin in the root thread for best results
BL: https://drive.google.com/open?id=0B2xxd5WoIhEwWlIzQmtxYlppenc
AP: https://drive.google.com/open?id=0B2xxd5WoIhEwWVlpVDJ5Y3kzdlE
CP: https://drive.google.com/open?id=0B2xxd5WoIhEwTG1abmtIQ2VFcm8
CSC: https://drive.google.com/open?id=0B2xxd5WoIhEwYUFsOUlPenFaX3M
Click to expand...
Click to collapse
Thanks for uploading these Joe. Hope the donation helps.
Am I understanding you went to the U FW an are now back on the A FW on your 930A?
Any issues I need to look out for now that I installed U on my 930A?
I just tried to install this firmware using Odin in root thread. But I get "Model dismatch fail" error. Any idea why?
I have AT&T SM-G930A with official PF2 firmware.
For some reason, OTA update and Smart Switch shows PF2 is up to date firmware.
For some reason, odin gets stuck on a files step?
Sorry been busy at work...
Yes, I was on T firmware, then U, then back on A now.
I never had any issue using the modded Odin. Rename the files to remove .md5 so it ends in .tar
joe3681 said:
I never had any issue using the modded Odin. Rename the files to remove .md5 so it ends in .tar
Click to expand...
Click to collapse
Tried removing md5. I get same error "FAIL! Model dismatch fail"
lambition said:
Tried removing md5. I get same error "FAIL! Model dismatch fail"
Click to expand...
Click to collapse
Use the modded Odin from root thread??
Version:
J700PVPU1APH4_J700PSPT1APH4_J700PVPU1APH4_HOME
Download link:
https://drive.google.com/file/d/0B6_i7gSz4xn3THI5bm94MnZ5Q1E/view?usp=drivesdk
INSTALL:
Use Odin to flash Rom!
NOTE:
If your phone has been rooted you must use either CF-Auto-Root or use my custom TWRP(recommended)or the Original TWRP and then just install the latest UPDATE-SU.zip to regain root access!
Credits: sammobile.com
can i just flash this over my current stock rom
javar19 said:
can i just flash this over my current stock rom
Click to expand...
Click to collapse
yes but you will regain all bloat
Starchild2k said:
Version:
J700PVPU1APH4_J700PSPT1APH4_J700PVPU1APH4_HOME
Download link:
https://drive.google.com/file/d/0B6_i7gSz4xn3THI5bm94MnZ5Q1E/view?usp=drivesdk
INSTALL:
Use Odin to flash Rom!
NOTE:
If your phone has been rooted you must use either CF-Auto-Root or use my custom TWRP(recommended)or the Original TWRP and then just install the latest UPDATE-SU.zip to regain root access!
Credits: sammobile.com
Click to expand...
Click to collapse
Can I flash this via odin after using your twrp to fix my soft bricked phone method? I still have your twrp installed
nvm works fine. so how are you coming with cm13?
Sent from my SM-J700P using XDA-Developers mobile app
Hi. I am new flashing phones. I have an j700p with "custom binary blocked by frp" message. i was using it in argentina. If i flash this rom to my phone, is it going to work? Thanks.
suarezjf said:
Hi. I am new flashing phones. I have an j700p with "custom binary blocked by frp" message. i was using it in argentina. If i flash this rom to my phone, is it going to work? Thanks.
Click to expand...
Click to collapse
1-first you need to unlock your device bootloader , on the phone, go to Settings > About Device then scroll down to find Build number and tap it 7 times to enable Developer Mode
2-next go to Settings > Developer options then set OEM unlocking to on
Then try with Odin
Thanks
Can we get an updated version? Normally I'd download from sam site but 1.5gb download with free account at 15kbs is ridiculous. You'd think they would provide better bandwidth for their support site and not try to have you pay a subscription...
h3xkore said:
Can we get an updated version? Normally I'd download from sam site but 1.5gb download with free account at 15kbs is ridiculous. You'd think they would provide better bandwidth for their support site and not try to have you pay a subscription...
Click to expand...
Click to collapse
I use SamFirm (here is a direct link if needed), it downloads the firmware from Samsung's servers and decodes the file to a flashable format.
Use "SM-J700P" in the model box, and one of these three region codes in the "Region" box
VMU - Virgin Mobile
SPR - Sprint
BST - "Australia (Boost Mobile) (BST)" is what it says on updato.com (formerly sammobile.com)
XAS - I have looked in threads on XDA and found that this is the "unlocked" version, use at your own risk, probably has the least bloat.
Or if your phone is still functioning download this handy little app that will tell you everthing you need to enter to get an update for your current FW.
Make sure the checkbox beside "Auto" is checked and click "Check Update" now go to the right panel, click the checkbox for "Decrypt automatically" and click "Download"
There ya go, I tried to make it as simple as possible and to give you the details you need, because I'm dumb and miss out on the obvious sometimes, so I make sure no one has that issue.
LexignisOfficial said:
I use SamFirm (here is a direct link if needed), it downloads the firmware from Samsung's servers and decodes the file to a flashable format.
Use "SM-J700P" in the model box, and one of these three region codes in the "Region" box
VMU - Virgin Mobile
SPR - Sprint
BST - "Australia (Boost Mobile) (BST)" is what it says on updato.com (formerly sammobile.com)
XAS - I have looked in threads on XDA and found that this is the "unlocked" version, use at your own risk, probably has the least bloat.
Or if your phone is still functioning download this handy little app that will tell you everthing you need to enter to get an update for your current FW.
Make sure the checkbox beside "Auto" is checked and click "Check Update" now go to the right panel, click the checkbox for "Decrypt automatically" and click "Download"
There ya go, I tried to make it as simple as possible and to give you the details you need, because I'm dumb and miss out on the obvious sometimes, so I make sure no one has that issue.
Click to expand...
Click to collapse
Wow very useful. Only problem is i don't have internet on my laptop or unlimited hotspot. Is there a similar app?
I didn't find an app but i found a site
http://updato.com/firmware-archive-select-model
h3xkore said:
Wow very useful. Only problem is i don't have internet on my laptop or unlimited hotspot. Is there a similar app?
I didn't find an app but i found a site
http://updato.com/firmware-archive-select-model
Click to expand...
Click to collapse
Next time just look for it on an apk mirror, apologies.
QUOTE=LexignisOfficial;74537952]Next time just look for it on an apk mirror, apologies.[/QUOTE]
Wait what? I meant an app that would download the firmware at a decent Speed. Sounds dumb now that I'm repeating it. Anyways minz posted a link of a more updated version with MUCH faster speeds.
https://www.androidfilehost.com/?fid=817550096634784392 for anyone wanting it. Thanks @minz1
h3xkore said:
Wait what? I meant an app that would download the firmware at a decent Speed. Sounds dumb now that I'm repeating it. Anyways minz posted a link of a more updated version with MUCH faster speeds.
https://www.androidfilehost.com/?fid=817550096634784392 for anyone wanting it. Thanks minz1
Click to expand...
Click to collapse
IDK why you would be looking for an app to download firmware you'd have to flash via Odin, very strange...
The app I referred you to is an app that gives you the region code and ID with which you need to enter into SamFirm to download the latest package for your device manually, sorry if there was any confusion.
LexignisOfficial said:
IDK why you would be looking for an app to download firmware you'd have to flash via Odin, very strange...
The app I referred you to is an app that gives you the region code and ID with which you need to enter into SamFirm to download the latest package for your device manually, sorry if there was any confusion.
Click to expand...
Click to collapse
No like i said was stupid. Thanks for pointing me in the right direction. Just wanted a way to download the firmware faster than 15kb/s
which android is it marshallow or nougat
which android is it marshallow or nougat
virgin mobile Galaxy J700P
Abhijith12 said:
which android is it marshallow or nougat
Click to expand...
Click to collapse
It's 6.0.1 there is a 7.1.1 link on the 7.1.1 DEODEXED thread !
---------- Post added at 12:47 PM ---------- Previous post was at 12:45 PM ----------
Abhijith12 said:
which android is it marshallow or nougat
Click to expand...
Click to collapse
It's 6.0.1 there is a 7.1.1 Firmware link on the 7.1.1 DEODEXED thread !
Copyed the link here
https://drive.google.com/drive/folders/1Ap1juibO37RXrKesAFSL1CybstM76F0b?usp=sharing
Has anyone found any working links to download the XAR version for US firmware for SM-T820? I can not find them anywhere. Would like to attempt root but definitely want the firmware to fall back on. If anyone has a link to the firmware it would be much appreciated
boobster2 said:
Has anyone found any working links to download the XAR version for US firmware for SM-T820? I can not find them anywhere. Would like to attempt root but definitely want the firmware to fall back on. If anyone has a link to the firmware it would be much appreciated
Click to expand...
Click to collapse
I used the BTU(UK) firmware, no issues, just changed the keyboard from UK to US.
boyofdestiny said:
I used the BTU(UK) firmware, no issues, just changed the keyboard from UK to US.
Click to expand...
Click to collapse
I'm also running BTU/UK firmware in lieu of my native XAR. Aside from my tablet devoloping a somewhat charming Brittish accent, I have had/noticed any issues.
Thanks, I will DL that one just in case.
Guys, I have a US device (t820) and just tried to install a European firmware. Whatever I do it won't allow me. I get an error unsupported dev_type (installing all the components of the firmware, BL, CSC, AP). Actually, downloaded the US firmware from the xda forum and that cannot be installed as well. hmmm
boyofdestiny said:
I used the BTU(UK) firmware, no issues, just changed the keyboard from UK to US.
Click to expand...
Click to collapse
Did you just install the UK version through odin without bootloader and can? I am getting error all the time. Not sure if I need to do something in addition (oem unlocked).
Sent from my SM-T820 using Tapatalk
I also installed the boatloader and the csc at the same time
Sent from my SM-T820 using XDA Free mobile app
boyofdestiny said:
I also installed the boatloader and the csc at the same time
Sent from my SM-T820 using XDA Free mobile app
Click to expand...
Click to collapse
I was doing that as well. Still getting an error. Did you install via odin? Are you rooted? Somebody told me to install via flashfire.
Sent from my SM-G935F using Tapatalk
Kyrillos said:
I was doing that as well. Still getting an error. Did you install via odin? Are you rooted? Somebody told me to install via flashfire.
Sent from my SM-G935F using Tapatalk
Click to expand...
Click to collapse
You may want to try this Odin version: Odin3_v3.12_PrinceComsy.zip
Kyrillos said:
I was doing that as well. Still getting an error. Did you install via odin? Are you rooted? Somebody told me to install via flashfire.
Sent from my SM-G935F using Tapatalk
Click to expand...
Click to collapse
Like the previous post suggested, you may want to check which version of ODIN you are using - also have you turned on OEM Unlock in Developer Settings?
muniz_ri said:
You may want to try this Odin version: Odin3_v3.12_PrinceComsy.zip
Click to expand...
Click to collapse
Thank you. I will give it a try today. OEM Unlock is enabled. One more question, which of the two CSC files should I use, there is which has HOME as part of the file name. Thanks in advance.
I'm wondering if someone here can assist me. I picked up the 128GB version of the Tab S3 at my local Best Buy. I flashed TWRP and Magisk and didn't have any. Then I decided to try out the Flash v1.1 Kernel. Well after I flashed that kernel the Google app kept crashing on me so I decided to start from scratch. The only problem was I couldn't find the XAR firmware for my 128GB S3. I tried the UK firmware listed above and that almost works except that it limits my storage to 32GB instead of 128GB. Has anyone out there found any XAR firmware that can be downloaded? Any idea how to fix the storage issue?
Edit: After poking around I found the correct firmware at the link below.
http://updato.com/firmware-archive-select-model?record=857A7A7D73D111E7963AFA163EE8F90B
Please someone for the love a god help me. I've been trying to download stock 6.0.1 firmware file for the past 2 days with no luck. I tried downloading from sam mobile website and the captcha won't load. I've found a Rapidgator link but it takes forever to download and already twice it has failed to download for some odd reason
I just wish I never updated to 7.0 Nougat so I want to downgrade, some kind soul please help me. :fingers-crossed:
h4mza said:
Please someone for the love a god help me. I've been trying to download stock 6.0.1 firmware file for the past 2 days with no luck. I tried downloading from sam mobile website and the captcha won't load. I've found a Rapidgator link but it takes forever to download and already twice it has failed to download for some odd reason
I just wish I never updated to 7.0 Nougat so I want to downgrade, some kind soul please help me. :fingers-crossed:
Click to expand...
Click to collapse
First of all we need details about your device like model number?
Second I must tell you, you can't downgrade from 7.0.
https://forum.xda-developers.com/galaxy-tab-s/general/tool-samfirm-samsung-firmware-t2988647
Try the tool from here and use the latest version. It works as I used it this morning.
Make sure you put the full model number in like SM-G925F
callumbr1 said:
First of all we need details about your device like model number?
Second I must tell you, you can't downgrade from 7.0.
https://forum.xda-developers.com/galaxy-tab-s/general/tool-samfirm-samsung-firmware-t2988647
Try the tool from here and use the latest version. It works as I used it this morning.
Make sure you put the full model number in like SM-G925F
Click to expand...
Click to collapse
Yeah it is SMG925F and can't I just flash 6.0.1 firmware with Odin to downgrade?