Hi, I have Redmi Note 5 and I tried to install TWRP recovery(twrp-3.5.2_9-0-vince.img). But every time in the TWRP it is telling that "Internal Memory" is showing as 0 MB and I am unable to change it. It would be pleasure if you know a method to overcome this issue. Thank you.
Baranetharan said:
Hi, I have Redmi Note 5 and I tried to install TWRP recovery(twrp-3.5.2_9-0-vince.img). But every time in the TWRP it is telling that "Internal Memory" is showing as 0 MB and I am unable to change it. It would be pleasure if you know a method to overcome this issue. Thank you.
Click to expand...
Click to collapse
I think you have to format your data partition, but then you will lose all. Backup first all photos and other things. And why not orange fox?
joke19 said:
I think you have to format your data partition, but then you will lose all. Backup first all photos and other things. And why not orange fox?
Click to expand...
Click to collapse
Redmi Note 5 - Whyred or Vince?
Hello, just come over to ask, want to buy my wife and me new phones and found the xiaomi redmi note 5 (global version). Specs are good enought for us, so want to buy it and want (of course) flash lineageOS but now i am confused with...
forum.xda-developers.com
Thank you so much for the help.
joke19 said:
Redmi Note 5 - Whyred or Vince?
Hello, just come over to ask, want to buy my wife and me new phones and found the xiaomi redmi note 5 (global version). Specs are good enought for us, so want to buy it and want (of course) flash lineageOS but now i am confused with...
forum.xda-developers.com
Click to expand...
Click to collapse
OrangeFOx recovery is also asking for a PIN, that why I am thinking.
Ok, I will prepare to format my device the help.
Thank you so much for the help.
Help request.
Situation:
- Redmi 4X (Global, santoni), bootloader unlocked,
- flash recovery TWRP, v. 3.6.0_9-0 performed by ADB and using "Temporary" same
versions of TWRP,
- flash recovery TWRP, v. 3.5.1_9-0 performed by ADB and using "Temporary" same
versions of TWRP,
- Backup partition recovery is used to check if the flash has actually taken place.
Always with a positive result (each version is checked with "sh2")!
- Reboot into recovery or shutdown and put into recovery mode, always with a positive
result - TWRP recovery works!
- Once the OS has been booted at least once, the contents of the partition recovery will
take effect immediately returns to stock recovery - ALWAYS!
- an attempt was made with flash stock recovery - the result was adequate,
- all these experiments took place even after using SW MiFlash20210226 with parameter
Save user data. Results without change - always returned stock recovery.
Thank you for your help (please excuse your English level - thank you)
nemohouci said:
Help request.
Situation:
- Redmi 4X (Global, santoni), bootloader unlocked,
- flash recovery TWRP, v. 3.6.0_9-0 performed by ADB and using "Temporary" same
versions of TWRP,
- flash recovery TWRP, v. 3.5.1_9-0 performed by ADB and using "Temporary" same
versions of TWRP,
- Backup partition recovery is used to check if the flash has actually taken place.
Always with a positive result (each version is checked with "sh2")!
- Reboot into recovery or shutdown and put into recovery mode, always with a positive
result - TWRP recovery works!
- Once the OS has been booted at least once, the contents of the partition recovery will
take effect immediately returns to stock recovery - ALWAYS!
- an attempt was made with flash stock recovery - the result was adequate,
- all these experiments took place even after using SW MiFlash20210226 with parameter
Save user data. Results without change - always returned stock recovery.
Thank you for your help (please excuse your English level - thank you)
Click to expand...
Click to collapse
I recommend this recovery.
Xiaomi Redmi 4X (santoni) build releases | OrangeFox Recovery Downloads
Orangefox recovery for Xiaomi Redmi 4X (santoni)
orangefox.download
You use mi flash tool as last? Then the customer recovery will be replaced. Mi flash tool, development settings, OEM unlock and flash your recovery over fastboot. Here is a good guide, but don't use the recovery from this site.
[All-in-One] Redmi Note 7 (lavender): Unlock Bootloader, Flash TWRP, Root, Flash ROM
Dear Redmi Note 7 user, I'm not responsible if anything happens to your device. If you execute these AiO procedures properly then you shouldn't face any problems. Before you proceed please back up all your important data and make sure that...
forum.xda-developers.com
Begin by point c
Related
Greetings everyone,
THIS IS FOR REDMI NOTE 3 SNAPDRAGON aka KENZO.
HOW IT STARTED: I was on latest stable NOS build 20170815. I mistakenly erased the persist partition, now that's serious, really. Getting to the point, everything was okay except that there was no VoLTE anymore.
WHAT I DID: I formatted the phone, tried restoring backups but unfortunately the EFS partition wasn't backed up earlier. Eventually and ultimately, I flashed the latest official stable MIUI 9, Android 6.0.1 Everything was back to normal, yay! Or not. The custom RECOVERY i.e. REDWOLF RECOVERY had been replaced by stock MIUI RECOVERY. I've tried Kingo, Queeno, ****ino no. of apps, but to no avail.
THE PROBLEM: I do not have a PC with me now and all these dickheads think a virus will creep in their systems if I send just one ****ing command, i.e. push a custom recovery using their cmd window, whenever I request them to allow me to use their laptops or desktops.
WHAT I'VE BEEN THINKING AND I'M IN REALLY NEED OF:
A SuperSU zip that can be flashed via official update app.
A way to send a command or push a recovery when I am booted into the RN3's bootloader, using another phone/tablet.
**THAT'S ALL. PLEASE COME FORWARD WITH ANY SUGGESTIONS YOU MIGHT HAVE.**
P.S. - Getting a computer or laptop is not an option, until now.
Thank you, everyone. Respect and regards.
Sent from my RN3.
This is the only recovery that has worked with my Mi Note 10 and Mi Note 10 Pro.
It is a Chinese version but it works perfectly.
It has Chinese and English language
Mod Edit : Links Removed
yeah, thanks again. the only one who can boot a xiaomi.eu rom. just wipe internal storage and data before.
but i can"t flash edxposed with this one. i have to use another recovery. except that, work fine.
nesquix said:
yeah, thanks again. the only one who can boot a xiaomi.eu rom. just wipe internal storage and data before.
but i can"t flash edxposed with this one. i have to use another recovery. except that, work fine.
Click to expand...
Click to collapse
Only fully working recovery at the moment.
TWPR work well if it wasn't for the fact that it doesn't support encryption.
Or I've done something wrong...
mrosi said:
TWPR work well if it wasn't for the fact that it doesn't support encryption.
Or I've done something wrong...
Click to expand...
Click to collapse
Format data >yes
Flash Rom>magisk and this https://forum.xda-developers.com/android/software/universal-dm-verity-forceencrypt-t3817389/amp/
You must proceed to update every time in the same method Rom+magisk and DFE. If you want to keep decrypted data
It works perfectly for me with this recovery
carlosml1 said:
This is the only recovery that has worked with my Mi Note 10 and Mi Note 10 Pro.
It is a Chinese version but it works perfectly.
It has Chinese and English language
Mod Edit : Links Removed
How do i flash TWRP? is it the same as the one listed in k20 pro guide?
https://forum.xda-developers.com/mi-9t/how-to/guide-unlock-bootloader-flash-xiaomi-eu-t3952443
Flash TWRP
1. Connect your phone to PC
2. Reboot to Fastboot using Vol Down and Power button
3. Make sure you have TWRP img in same folder as Minimal ADB
4. Start Minimal ADB
5. Type
fastboot devices
6. Once you can see it in the list, type:
fastboot flash recovery [name of TWRP image].img
7. Type
fastboot reboot recovery
Click to expand...
Click to collapse
Click to expand...
Click to collapse
if it is the same as xiaomi k20 pro
Mod Edit
This Chinese version of TWRP is based on modified source which is not released anywhere and hence it violates XDA GPL Policy since TWRP source is licensed under GPL.
Hence Links Removed and Thread closed.
jackeagle
Forum Moderator
Okay, I have been looking everywhere... Is Official TWRP out for Note 9 yet? I dont want to install unofficial ROM, and compiling my own version is too much time. If its out, can someone throw me with a link? If not, what do you think, when will they upload it?
Thanks for you answers.
https://twrp.me/Devices/
zerodeaths000 said:
Okay, I have been looking everywhere... Is Official TWRP out for Note 9 yet? I dont want to install unofficial ROM, and compiling my own version is too much time. If its out, can someone throw me with a link? If not, what do you think, when will they upload it?
Thanks for you answers.
Click to expand...
Click to collapse
No, no official TWRP out there, yet. I don't know for the RN9 (merlin), but for the RN9s/Pro India (curtana) there are LR TWRP, LOS recovery and PBRP out. For the RN9Pro global (joyeuse) and RN9ProMAX(excalibur) only PBRP.
Don't flash a recovery for curtana on a joyeuse or an excalibur! It could hardbrick the phone and only a service centre or a MI account with special rights to flash in EDL mode (which Xiaomi doesn't give out anymore) would be able to fix that!
There are already many ROMs for the curtana out there, but for the others only a few.
For the RN9(merlin) is a sperate forum here on XDA.
Tried all sorts, none worked.
Until I found this.
https://www.cyanogenmods.org/twrp-recovery-redmi-note-9-pro/
Offered there for Redmi Note 9 Pro / 9s [curtana]
But also works on my Redmi Note 9 Pro Joyeuse.
Backup was created without an error message.
Restoring data also worked correctly.
All other versions had a problem with this and issued an error and the data was of course destroyed.
The misc.bin is important for the installation, which was not included in all other versions
Ps:
Point 8 does not work there,
fastboot oem reboot-recovery
fastboot does not know this command.
Then just by
fastboot reboot
reboot and quickly via buttons
Power + volume up
boot into recovery mode
Thanks!
tinaeire said:
No, no official TWRP out there, yet. I don't know for the RN9 (merlin), but for the RN9s/Pro India (curtana) there are LR TWRP, LOS recovery and PBRP out. For the RN9Pro global (joyeuse) and RN9ProMAX(excalibur) only PBRP.
Don't flash a recovery for curtana on a joyeuse or an excalibur! It could hardbrick the phone and only a service centre or a MI account with special rights to flash in EDL mode (which Xiaomi doesn't give out anymore) would be able to fix that!
There are already many ROMs for the curtana out there, but for the others only a few.
For the RN9(merlin) is a sperate forum here on XDA.
Click to expand...
Click to collapse
Thanks for reminding, I didn't even know I had a joyeuse device, with QJZEUXM rom. I wanted to flash curtana... You saved me
nostra_DE said:
Tried all sorts, none worked.
Until I found this.
https://www.cyanogenmods.org/twrp-recovery-redmi-note-9-pro/
Offered there for Redmi Note 9 Pro / 9s [curtana]
But also works on my Redmi Note 9 Pro Joyeuse.
Backup was created without an error message.
Restoring data also worked correctly.
All other versions had a problem with this and issued an error and the data was of course destroyed.
The misc.bin is important for the installation, which was not included in all other versions
Ps:
Point 8 does not work there,
fastboot oem reboot-recovery
fastboot does not know this command.
Then just by
fastboot reboot
reboot and quickly via buttons
Power + volume up
boot into recovery mode
Click to expand...
Click to collapse
What ROM does your device use?
@zerodeaths000
Redmi Note 9 Pro – EEA Stable ROM
V11.0.4.0.QJZEUXM
https://mirom.ezbox.idv.tw/en/phone/joyeuse/
If you actually have the ROM QJZEUXM, then your phone is a Redmi Note 9 Pro
Without Pro, it had to have the following ROM QJOEUXM
https://mirom.ezbox.idv.tw/en/phone/merlin/
So never overlook the Pro, Pro and not Pro differ.
nostra_DE said:
@zerodeaths000
Redmi Note 9 Pro – EEA Stable ROM
V11.0.4.0.QJZEUXM
https://mirom.ezbox.idv.tw/en/phone/joyeuse/
If you actually have the ROM QJZEUXM, then your phone is a Redmi Note 9 Pro
Without Pro, it had to have the following ROM QJOEUXM
https://mirom.ezbox.idv.tw/en/phone/merlin/
So never overlook the Pro, Pro and not Pro differ.
Click to expand...
Click to collapse
I have a PRO, bought in Hungary, and even looked up that I had that ROM in the settings! Thanks for your reply!
Also, one more question. That ROM that you have provided, In case anything goes wrong, how can I flash it back?(MIUI 11.0.4.0)
The best way is by fastboot, see my post # 6 here
https://forum.xda-developers.com/re...9-pro-dead-t4141055/post83194647#post83194647
https://mirom.ezbox.idv.tw/en/phone/joyeuse/
Fastboot
joyeuse_eea_global_images_V11.0.4.0.QJZEUXM_20200715.0000.00_10.0_eea_dcfb9c0b60.tgz
https://bigota.d.miui.com/V11.0.4.0...EUXM_20200715.0000.00_10.0_eea_dcfb9c0b60.tgz
nostra_DE said:
The best way is by fastboot, see my post # 6 here
https://forum.xda-developers.com/re...9-pro-dead-t4141055/post83194647#post83194647
https://mirom.ezbox.idv.tw/en/phone/joyeuse/
Fastboot
joyeuse_eea_global_images_V11.0.4.0.QJZEUXM_20200715.0000.00_10.0_eea_dcfb9c0b60.tgz
https://bigota.d.miui.com/V11.0.4.0...EUXM_20200715.0000.00_10.0_eea_dcfb9c0b60.tgz
Click to expand...
Click to collapse
Unfortunately, I cant get MiFlash tool to work(Doesn't install the drivers after a long waiting), so I'm going to have to do it in fastboot(command line). Also, I got the .zip version, but if required, I can get the tar file.
Please refresh the forum link I gave here again.
I accidentally wrote Power + Up for the fastboot mode instead of Power + down
Just seen and corrected.
---------------------------------
The * .zip are only for recovery or OTA flash.
For fastboot with flashtool you absolutely need the content from * .tgz
Winrar completely unpacks folders and files that you need for fastboot.
7-zip, however, still displays a * .tar archive, which could then be flashed with the fastboot command line. Not tried myself.
Ps: driver problem maybe an administrator problem?
Start setup as administrator.
Or a snake oil problem (third-party Antivir)?
nostra_DE said:
Please refresh the forum link I gave here again.
I accidentally wrote Power + Up for the fastboot mode instead of Power + down
Just seen and corrected.
---------------------------------
The * .zip are only for recovery or OTA flash.
For fastboot you absolutely need the content from * .tgz
Winrar completely unpacks folders and files that you need for fastboot.
7-zip, however, still displays a * .tar archive, which could then be flashed with the fastboot command line. Not tried myself.
Ps: driver problem maybe an administrator problem?
Start setup as administrator.
Or a snake oil problem (third-party Antivir)?
Click to expand...
Click to collapse
Got it. I can fix the driver issue for sure. I will try this method, with the cyanogenmod link you gave. I will notify you when its done, because I have 3 more days until I can unlock the bootloader. Hope I won't have to flash the firmware again, and that nothing goes wrong.
One more thing though
"The folder with the extracted files must be on the root of a partition, otherwise there are error messages"
Does this mean that the files found in the tar file have to be extracted directly to C:\ or any other partition?
Partition doesn't matter, it doesn't have to be C :
I get an error message in the not root, probably because the path name was too long.
Didn't investigate further, but copied it straight into the root.
Looks like.
Before that, the folder was on the desktop, which of course made the path name very long.
Maybe the long folder name would have been enough
joyeuse_eea_global_images_V11.0.4.0.QJZEUXM_20200715.0000.00_10.0_eea
shorten by renaming.
Hello everyone!
I'm new to this. I have a kate and was able to unlock the bootloader. I installed a fastboot rom (8.1.4) that I downloaded from <https://xiaomifirmwareupdater.com>. I also downloaded a twrp from <https://twrp.me/> and installed it successfully via adb. Then there's this:
If I reboot to the system after twrp installation, it boots normally but when I try to enter twrp, it's not there, it enters standard recovery mode. So it seems it's not kept after rebooting.
If from Windows cmd I boot into twrp, there's no decryption process at the start (as I've seen in videos) and I can't install root (the option is not there). And worst of all, when I leave twrp and reboot the phone it wont start.
So because I'm quite limited in technical knowledge, my temporary solution is to reinstall the old rom again (8.1.4) and get the phone reset. I've already done this twice today.
I suppose I need to install some kind of zip file while I'm inside twrp to make it stay after rebooting (I've seen that for other devices). Is that correct? If yes, how can I identify and find this file, since at <https://twrp.me/> there was just the twrp listed for this device. No zip files there for kate/kenzo.
Any patient friend who would shed some light on this, please?
Thank you very much for reading this and for any help you can offer!
Best wishes!
GZ
Although I found it a little overwhelming at first, I found everything I needed here:
[NEWBIE GUIDE v2.0] MIUI ROMs, TWRPs, ZIPs, BACKUP, FLASH, RESTORE
UPDATED NEWBIE GUIDE v2.0 FOR REDMI NOTE 3 SNAPDRAGON (KENZO) (WORKS FOR ALL MIUI / AOSP / CM BASED ROMs) GUIDE SECTIONS : QUICK LINKS#1 : MIUI ROM | TYPES OF MIUI ROM | TWRP | TYPES OF TWRP #2 : TWRP FLASHABLE ZIPs | FULL PARTITION BACKUP |...
forum.xda-developers.com
Thank you!
View attachment 5472077
Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
*/Your warranty is now void.
We are not responsible for anything that may happen to your phone by installing any custom ROMs and/or recoverys, kernels.
You do it at your own risk and take the responsibility upon yourself and you are not to blame us or XDA and its respected developers./*
Click to expand...
Click to collapse
FLASHING GUIDE
you must need to unlock your bootloader
Click to expand...
Click to collapse
1. adb reboot bootloader
3. fastboot flash boot twrpname.img
4. fastboot reboot recovery
note! will ask a password to decrypt or to see internal storage just put the password (optional if your device have a password or pattern,pin)
5. flash magisk-v23.0.zip (optional)
6. then reboot system. done!!
Click to expand...
Click to collapse
INFORMATION!
- device is shipped as android 11 , and device don't have recovery partition meaning its virtual A/B its use recovery as boot check here (for more info)
NOTE FOR FLASHING!!
- If you face wifi Problem use twrp_a or twrp_b .
- If you want to root your device flash magisk already included in *.zip (Don't use official one because you will face bootloop)
DOWNLOAD
download twrp_a
download twrp_b
MAGISK FOR ROOTING
credits: to topjohnwu
DOWNLOAD MAGISK
WHAT WORKING ?
- Decryption
- flashing payload.pin / recovery rom (note! if you want to flash rom or modify your device just back up your imei please)
- fastbootd
- etc.
- for the bug just tell me.
DEVICE TREE
DEVICE KERNEL SOURCE
CREDITS
- TEAM WIN FOR RECOVERY
- TESTER'S FROM INDONESIA
- TOPJOHNWU for magisk
- @osm0sis for the A/B installer script
BUILD BY:
t.me/myusernameiswhat @mastersenpai05)
link of b not working
Abdullah.Csit said:
link of b not working
Click to expand...
Click to collapse
Done sir
thanks!
Thanks sir. Does it only need unlocking bootloader? Doesnt need mi unlocking?
How we can determine which (a or b) twrp should be used?
symbuzzer said:
Thanks sir. Does it only need unlocking bootloader? Doesnt need mi unlocking?
How we can determine which (a or b) twrp should be used?
Click to expand...
Click to collapse
If you got unlocked bootloader device then you ready to go.
try "a" if you got wifi issues then use "b".
symbuzzer said:
Thanks sir. Does it only need unlocking bootloader? Doesnt need mi unlocking?
How we can determine which (a or b) twrp should be used?
Click to expand...
Click to collapse
You need tool to unlock your bootloader, you can use a mi unlock tool you need to wait 7days, or if you want to unlock that instantly you need other tool
TWRP will be updated after I successfully done my experiment
is just need flash a or b anyone is ok ? or need flash both ?
How to backup imei?
Is there any way to flash TWRP permanently?
"With the new TWRP 3.6.0, things will be a little different. After you temporarily boot the TWRP image using the ‘Fastboot boot’ command, you will be able to see a Flash Current TWRP in the Advanced section of custom recovery."
Is this working?
symbuzzer said:
How to backup imei?
Is there any way to flash TWRP permanently?
"With the new TWRP 3.6.0, things will be a little different. After you temporarily boot the TWRP image using the ‘Fastboot boot’ command, you will be able to see a Flash Current TWRP in the Advanced section of custom recovery."
Is this working?
Click to expand...
Click to collapse
Will not
why not?
Hi. Thanks for the development
I have a question. Assuming that I've flashed this twrp, how do I properly backup the entire phone, I mean which one will be selected in backup option . I want to flash some custom roms and restore the created backup if something goes wrong
09kkthxbb said:
Hi. Thanks for the development
I have a question. Assuming that I've flashed this twrp, how do I properly backup the entire phone, I mean which one will be selected in backup option . I want to flash some custom roms and restore the created backup if something goes wrong
Click to expand...
Click to collapse
NO advisable, Do not try this way!
I have a bad experience with this method, I have a Note 8 pro (Begonia), i did a rom backup with twrp, then flashed other custom roms, after few tested on various roms, i decided to get back to Miui rom, thinking of the easy way, I restored its Miui backup images via twrp, the phone bricked. In the end, I had to sent to xiaomi service center for repair.
I believe that was due to different version of Preloader of rom crashed with TWRP.
Of course, with some "MTK auth bypass softwares" available today, you may take the risk if you wish.
Could anyone provide here any already backup of Chopin stock recovery share it here, please?
Edit: Since there is no recovery partition, You had just re-flashing "boot.img" by twrp then you will restore stock recovery and that operation will also let you lose your root.
Is this compatible with x3 gt global 12.5.7 update?
koolkattt said:
Is this compatible with x3 gt global 12.5.7 update?
Click to expand...
Click to collapse
Hi man, we tried this as well.
We rollback to the old version for now just to have a working root access.
являетсяIs there any localized firmware on this device? will they?
koolkattt said:
Is this compatible with x3 gt global 12.5.7 update?
Click to expand...
Click to collapse
Sure, im runnign this version and works good with magisk
folken2003 said:
Sure, im runnign this version and works good with magisk
Click to expand...
Click to collapse
how to make work? I try many way also bootloop, can share step by step to success ? thanks