Hi My name is Henning and i am quite new to the world of rooting.
I have a samsung S9 + that i wish to install Noblerom 1.2 on, and to do that i have understand that you need a bootloader which if i am correct is the twrp.
But when i have downloaded Odio 3 V 3.14 and try to flash my phone i just get:
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1301)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 45 M
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NAND Write Start!!
<ID:0/005> SingleDownload.
<ID:0/005> recovery.img
<ID:0/005> RQT_CLOSE !!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
and here i am stuck:/
I have installed Samsung USB Driver on my PC and enabled OEM unlocking, i have spesifecly downloaded the if i am correct twrp-3.3.1-1.img.tar file but still i am stuck.
Anyone who has a clue what i can do?
All help is grately appriciated.
Regards Henning
Booze89 said:
Hi My name is Henning and i am quite new to the world of rooting.
I have a samsung S9 + that i wish to install Noblerom 1.2 on, and to do that i have understand that you need a bootloader which if i am correct is the twrp.
But when i have downloaded Odio 3 V 3.14 and try to flash my phone i just get:
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1301)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 45 M
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NAND Write Start!!
<ID:0/005> SingleDownload.
<ID:0/005> recovery.img
<ID:0/005> RQT_CLOSE !!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
and here i am stuck:/
I have installed Samsung USB Driver on my PC and enabled OEM unlocking, i have spesifecly downloaded the if i am correct twrp-3.3.1-1.img.tar file but still i am stuck.
Anyone who has a clue what i can do?
All help is grately appriciated.
Regards Henning
Click to expand...
Click to collapse
I'll try to help as failing with odin can be common.
To start with TWRP is a recovery file to replace stock recovery not a bootloader.
What is the model name ( ie: sm-g965f)?
How have you tried to install TWRP ( the steps taken ) or are you following a guide ( which one )?
Also if you can post a copy of your Download screen would help as well or at least the first 11 lines.
While you can use TWRP version 3.3.1-1 the latest version is 3.5.2_9-0. You can use TWRP website to download ( twrp.me )
Hmm i dont know it why it happend but suddenly it worked!
Thank you for your help anyway!
Regards Henning
Related
So im trying to root my S3 international version using Odin but, when it starts everything is fine but when it finishes the first stage which is the recovery, it says removed when i havent even touched it.
Also i have USB debug on.
Below is the activity on Odin
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005> cache.img
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Completed..
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 1 / failed 0)
Somebody help me please
AkhJustin said:
So im trying to root my S3 international version using Odin but, when it starts everything is fine but when it finishes the first stage which is the recovery, it says removed when i havent even touched it.
Also i have USB debug on.
Below is the activity on Odin
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005> cache.img
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Completed..
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 1 / failed 0)
Somebody help me please
Click to expand...
Click to collapse
hmm normal behavior
After flashing, it will boot to recovery, finish the superuser, cwn etc install, and then it will reboot the phone.
Check if Superuser is not installed
latest cf-root is 6.4 btw ...
NielDK said:
hmm normal behavior
After flashing, it will boot to recovery, finish the superuser, cwn etc install, and then it will reboot the phone.
Check if Superuser is not installed
latest cf-root is 6.4 btw ...
Click to expand...
Click to collapse
sorry im quite new to this, so what do i do exactly after the process ive shown you? When i turn the phone on i gave the cwn superuser access...do i re-do the steps?
Also when it reboots I set superuser permissions and so...but now what?
AkhJustin said:
So im trying to root my S3 international version using Odin but, when it starts everything is fine but when it finishes the first stage which is the recovery, it says removed when i havent even touched it.
Also i have USB debug on.
Below is the activity on Odin
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005> cache.img
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Completed..
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 1 / failed 0)
Somebody help me please
Click to expand...
Click to collapse
After this the phone will automatically reboot into Cwm recovery and install su binary and root the phone. And then reboot. You just have to sit and watch.
Sent from my GT-I9300
123shree said:
After this the phone will automatically reboot into Cwm recovery and install su binary and root the phone. And then reboot. You just have to sit and watch.
Sent from my GT-I9300
Click to expand...
Click to collapse
Yaaay my phone is rooted, i still think i somehow missed a step but oh well used root checker and it tells me it is rooted...i maybe wouldnt have realised its rooted for a loong time. Thanks guys for the urm...help?
I was going to flash a new pit file and a kernel along with that but somehow it didn't work, I got stuck at Samsung Galaxy S2 logo and couldn't boot into recovery. I assume I soft bricked my device. Then I searched some guides on how to fix it but I couldn't, and the download links are often broken in those guides. In Odin3 flash get stuck at "<ID:0/005> NAND Write Start!!" and then ERROR. Is this fixable and in that case how? Please provide download links that work if I need any file.
This is the Odin3 log when I try to flash. I try to flash the files (PDA,PHONE,CSC) in this thread ("Another option for i9100" section). I have tried with pit file and without (I think it was wrong pit though) but same result...
<ID:0/005> Added!!
<ID:0/005> Removed!!
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> boot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Well after having this problem in over 24 hours I try to flash my old stock gingerbread rom with odin and it worked. I then flashed CWM kitkat compatible Kernel and that also works. So no help needed here anymore I think.
Hello folks,
My Galaxy SII can't start anymore, because everytime it stucks in the boot process.
I've tried to reinstall the firmware of the SII with the newset Odin Verison aviable.
But it won't work, i get this type of error:
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> boot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> cache.img
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
I would be so thankfull if anybody could help me
Happy New Year!
Hi guys.
So i bricked my ace i and i looked it up and found a tut which said i should flash stock firmware with Odin.
I downloaded Odin and had a lot of trouble with installing drivers.But I did it and when i do it fails.
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sbl.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> BcmCP.img
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I can still run in recovery mode with ClockWorldMod Recovery.
I can even mount usb storage
I would REALLY appreciate help.
Thank you.
granitba said:
Hi guys.
So i bricked my ace i and i looked it up and found a tut which said i should flash stock firmware with Odin.
I downloaded Odin and had a lot of trouble with installing drivers.But I did it and when i do it fails.
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sbl.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> BcmCP.img
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I can still run in recovery mode with ClockWorldMod Recovery.
I can even mount usb storage
I would REALLY appreciate help.
Thank you.
Click to expand...
Click to collapse
Try to flash again the stock rom via odin or download and install a custom rom like Cyanogenmod, Slim rom, carbon rom...
ioanvlad67 said:
Try to flash again the stock rom via odin or download and install a custom rom like Cyanogenmod, Slim rom, carbon rom...
Click to expand...
Click to collapse
i try again and again but it doesn't work and as for a custom ROM like cyanogen mod that's where i got the problem because it doesn't support ace i so i installed some kernel (or something like that , this thing kernel_CM7_v4.0_cooperve.zip) and my phone got bricked
I can try another ROM but i'm afraid that it'll make things even worse.
maybe you need to flash cwm recovery and format system,data and chache partition. after that try to reflash stock rom
So i haven't rooted a phone in quite some time, And decided to root my Unlocked S6 Edge (SM-G925F). Downloaded ODIN, Latest version of TWRP for my device and model, Put phone in download mode, Opened odin on computer and connected my edge, Selected TWRP and hit start then it said FAILED.
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> recovery.img
<ID:0/005> __XmitData_Write
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/005> Added!!
Phone is stuck on blue error screen now "An error has occured while updating....."
Any idea how to fix ?
fml12345 said:
So i haven't rooted a phone in quite some time, And decided to root my Unlocked S6 Edge (SM-G925F). Downloaded ODIN, Latest version of TWRP for my device and model, Put phone in download mode, Opened odin on computer and connected my edge, Selected TWRP and hit start then it said FAILED.
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> recovery.img
<ID:0/005> __XmitData_Write
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/005> Added!!
Phone is stuck on blue error screen now "An error has occured while updating....."
Any idea how to fix ?
Click to expand...
Click to collapse
What version of twrp did you try to flash?
Try a different cable. Sometimes fail at __XmitData_write occurs with a non Samsung cable.
If not just restore with smart switch or flash stock firmware with Odin then it will be back on. Then try twrp again.