Is there any dolby audio mod for Android 11 with equalizer such as atmos, digital plus or dolby audio without root ?
As far as I know no you must have root. I've used Dolby Digital v7.3 from 2nd post located here quite a bit on my last device which was a OnePlus 6t and it worked very well. There was a small bug that didn't effect anything where when I initially set DD up, when turning one of the setting on or off I would have to reopen the app because it would close and push me out of it when making these adjustments. I don't mean the EQ adjustments in talking about the four other sound switches on the app below where the EQ is ok DD. This is a known bug but like I said if didn't cause anything to not work I would just flash 7.3 in magisk manager then during initial set-up I would turn on these settings one by one and one at a tone due to this issue and the app pushing me out every time I turned on a switch. Once I had all four on how I wanted them then I would adjust the EQ depending on what I was listening to.. I don't think there are Dolby Mods that can be used without root... I believe they'd have to be made as part of the rom to be that way like Atmos comes on some devices but I've never seen anything like this besides from an oem that doesn't require root.
Dolby Digital 7.3 is in the second post here:
[6.0-12.0][Magisk]Dolby Digital Plus[upd.20211005]
Dolby Digital Plus for 9.0-12.0 OS Need selinux permissive Hi. I present the mod Dolby Digital Plus (interface and functionality is the same as that of Dolby Atmos). Theoretically should work on OS 6.0-9.0. I checked only on Oreo and Pie...
forum.xda-developers.com
flash713 said:
As far as I know no you must have root. I've used Dolby Digital v7.3 from 2nd post located here quite a bit on my last device which was a OnePlus 6t and it worked very well. There was a small bug that didn't effect anything where when I initially set DD up, when turning one of the setting on or off I would have to reopen the app because it would close and push me out of it when making these adjustments. I don't mean the EQ adjustments in talking about the four other sound switches on the app below where the EQ is ok DD. This is a known bug but like I said if didn't cause anything to not work I would just flash 7.3 in magisk manager then during initial set-up I would turn on these settings one by one and one at a tone due to this issue and the app pushing me out every time I turned on a switch. Once I had all four on how I wanted them then I would adjust the EQ depending on what I was listening to.. I don't think there are Dolby Mods that can be used without root... I believe they'd have to be made as part of the rom to be that way like Atmos comes on some devices but I've never seen anything like this besides from an oem that doesn't require root.
Dolby Digital 7.3 is in the second post here:
[6.0-12.0][Magisk]Dolby Digital Plus[upd.20211005]
Dolby Digital Plus for 9.0-12.0 OS Need selinux permissive Hi. I present the mod Dolby Digital Plus (interface and functionality is the same as that of Dolby Atmos). Theoretically should work on OS 6.0-9.0. I checked only on Oreo and Pie...
forum.xda-developers.com
Click to expand...
Click to collapse
Thanks
It was very helpful.
snehasish2000 said:
Is there any dolby audio mod for Android 11 with equalizer such as atmos, digital plus or dolby audio without root ?
Click to expand...
Click to collapse
Hi mate,
Try eqfy app from official Google store - it's damm good. I used to have rooted device and have done some research to get good app without root that do job really good and that is what I have found.
Related
Moved all of my development efforts from XDA.
Thanks for the hard work, I don't get this instal and reinstall? but please confirm the following:
Flash the op6_v5_stereomod in twrp,
Install AML from magisk,
Reboot.
Thanks for your help.
Thanks for your work!
There are applications that output sound depending on the proximity sensor (for example, watsapp, telegram). You turn on the voice message, bring the phone to your ear and the sound from the external speaker switches to conversational (that could be heard in public places).
Is it possible to implement it in your fashion or is it technically impossible?
Is it any difference between this
https://forum.xda-developers.com/oneplus-6/themes/magisk-stereo-speaker-mod-oneplus-6-t3814512
And u r mod
It literally says EXACTLY what the differences are in the main post dude!
- AML support
- Unity support
This basically means:
- This can work flawlessly with other audio mods.
- This can work with or without Magisk.
chrisaw said:
It literally says EXACTLY what the differences are in the main post dude!
- AML support
- Unity support
This basically means:
- This can work flawlessly with other audio mods.
- This can work with or without Magisk.
Click to expand...
Click to collapse
Try to create app like op5t stereo mod which helps to control sound parameters like mono, true stereo etc
Sorry to say this but providing any form of GUI or additions to the mod isn't really in the scope of what I set out to achieve here.
The code, however, is freely available on GitHub using the link from the main post - I'm more than happy for anyone to fork the code and add any additional functionality they wish to.
My aim here is simply to provide AML support so things like Atmos, ViPER, etc. can be used seamlessly alongside the mod. I also converted the mod to use "patch" instead of just overwriting the file and switched to Unity so that it could support being flashed directly for those not wishing to run Magisk.
Confirm this is working flawlessly together with ainur sauron & viper4android. Awesome mod for our device! Thank you very much!
bartjeh1991 said:
Confirm this is working flawlessly together with ainur sauron & viper4android. Awesome mod for our device! Thank you very much!
Click to expand...
Click to collapse
And with Dolby Atmos ??
Ferdav.lp said:
And with Dolby Atmos ??
Click to expand...
Click to collapse
Yes it works with Atmos - I ran that for a while myself - worked great.
If you're wondering - I ran the latest build from: https://androidfilehost.com/?w=files&flid=247761
Not my work - just linking to it since the main post for Atmos links to a 5 month older version by the same dev - very odd.
Ferdav.lp said:
And with Dolby Atmos ??
Click to expand...
Click to collapse
vtec303 said:
Thanks for the hard work, I don't get this instal and reinstall? but please confirm the following:
Flash the op6_v5_stereomod in twrp,
Install AML from magisk,
Reboot.
Thanks for your help.
Click to expand...
Click to collapse
No - if you're using Magisk - just download the ZIP, flash in Magisk. Then install AML from Magisk and you're golden!
Do any of these audio mods actually improve speaker quality? The speaker crackles at high volumes right out of the box. Would love to improve it, but wiping to unlock bootloader only seems worth it if there's a noticeable difference
xxBrun0xx said:
Do any of these audio mods actually improve speaker quality? The speaker crackles at high volumes right out of the box. Would love to improve it, but wiping to unlock bootloader only seems worth it if there's a noticeable difference
Click to expand...
Click to collapse
Some of the mods can have a considerable amount of effect on the audio quality but things like Atmos are not going to resolve any audio "popping" or distortion. ViPER may be able to help mitigate the issue.
The purpose of this mod, however, is actually just to enable the earpeace speaker as a secondary speaker so instead of just the one mono speaker at the button - you have a kind of stereo effect (i.e. 2 audio sources.)
I'm sure others can guide better on which specific ViPER settings may help with the issue you're facing but it may be worth tinkering if you're passionate about resolving the issue. That having been said - unlocking the bootloader and rooting does lose you OTA functionality so it's something to keep in mind.
How can permanent increase earpiece volume? If I increase it with ex kernel manager I turns back to normal after switching to standby
What is "AML" and there I get the aml module? ?
I have installed the v5 of stereo mod along with AML and Vioer4Amdroid. How do i control the volume and gain levels of earpiece? I am not able to find the control settings anywhere.
Vevee said:
I have installed the v5 of stereo mod along with AML and Vioer4Amdroid. How do i control the volume and gain levels of earpiece? I am not able to find the control settings anywhere.
Click to expand...
Click to collapse
You can change these values in a kernel manager. Also i think you'll need a custom kernel.
bartjeh1991 said:
You can change these values in a kernel manager. Also i think you'll need a custom kernel.
Click to expand...
Click to collapse
Ohh thanks. Can you please let me know which kernel works the best for it?
---------- Post added at 12:15 PM ---------- Previous post was at 12:09 PM ----------
Which kernel manager to use to control the sound settings of earpiece?
A kernel manager can do this for you - Kernel Aduitor is probably a good option.
Any kernel though mate - they all have that option as far as I'm aware.
chrisaw said:
A kernel manager can do this for you - Kernel Aduitor is probably a good option.
Any kernel though mate - they all have that option as far as I'm aware.
Click to expand...
Click to collapse
Can you post a screenshot i have installed kernel auditor but still see no option to control earpiece volume or gain
After extensive music search i never thought this music app can beat doulby atmos or other music mods likes v4a.
Yes i definitely say without tuning anything this music app is giving awsome music experience in real 3D sound effect.
Along with v4A this is cherry on ice scream.
Overview of app and settings :
https://youtu.be/EZAbeLawjgQ
Download the app: (unreleased free version)
https://play.google.com/store/apps/details?id=com.tamalbasak.musicplayer3d
What app gives:
1) its a music app with great 3d equilizer control.
2)looks awesome with material desing
How to:
1)Open app configure it give all permissions
2)enable virtual3d and surround 3d tab
3)) set equizer as per u r Requiment but i recommend keep all stock because there will be some sound distortion
4)now all is done but if you want more great sound
Then u need v4A
Open app and Enable spectrum extension tab
Field surround tab , diffential surround tab, viper clarity tab.
Done
Now play music only via 3D music 7.1 app only
Feel the difference.
Specially how can i describe sound is like i am hearing music sound separated for each ear phones pairs sitting in larg cinema hall sound is coming from All directions that's aswome though such effects are available for doulby and v4a but here that impact is very good as compared to them.
May be earphones are also reposible for best sound.
Here earphones i am using
https://youtu.be/89kZxHuhhWc
I test it, you must close developer options to run the app, didn't work with root or bootloader open, but you can use magiskhide for this
Toni Moon said:
I test it, you must close developer options to run the app, didn't work with root or bootloader open, but you can use magiskhide for this
Click to expand...
Click to collapse
Newest version doesn't need to do that.
How is the sound? Can u plz tell users
The sound it's similar to Dolby Atmos effect, more spacial if now the tool hasn't restrictions i test it again.
So this sound mod only works within the app and not on apps like youtube or spotify?
This sound effect was kind of cringy for me. Using v4a audiophile on liquidremix pie... Does this really sound nice to you guys? For me it felt like sitting high in a sewer... But there was alot of settings I didn't bother playing with, that's nice I guess... And why do I need to use magisk hide to run it
bartjeh1991 said:
So this sound mod only works within the app and not on apps like youtube or spotify?
Click to expand...
Click to collapse
Yes it only for mp3 music
efinityy said:
This sound effect was kind of cringy for me. Using v4a audiophile on liquidremix pie... Does this really sound nice to you guys? For me it felt like sitting high in a sewer... But there was alot of settings I didn't bother playing with, that's nice I guess... And why do I need to use magisk hide to run it
Click to expand...
Click to collapse
Its 3d effect is awsome but along with v4a is more awsome . donts use audiophile profile just enable tabs that i mentioned in video for v4a and keep all stock settings for music app too make sure virtual 3d and 7. 1 surround effect is enabled.
And then play music.
Specially how can i describe sound is like i am hearing music sound separated for each ear phones pairs sitting in larg cinema hall sound is coming from All directions that's aswome though such effects are available for doulby and v4a but here that impact is very good as compared to them.
May be earphones are also reposible for best sound.
Here earphones i am using
https://youtu.be/89kZxHuhhWc
I have just downloaded it keeps saying developer option is on, I can't really keep developer options off, but thanks anyway, cheers.
vtec303 said:
I have just downloaded it keeps saying developer option is on, I can't really keep developer options off, but thanks anyway, cheers.
Click to expand...
Click to collapse
Disable developer option, hide app from Root in magisk.
Open app Configure it then after that you can enable developers option but always hide it from root
pankspoo said:
Disable developer option, hide app from Root in magisk.
Open app Configure it then after that you can enable developers option but always hide it from root
Click to expand...
Click to collapse
I use poweramp, the DSP on it is really good with a lot of settings and works well with root and DO on, I will stick to that, but thanks for your help, cheers.
pankspoo said:
Its 3d effect is awsome but along with v4a is more awsome . donts use audiophile profile just enable tabs that i mentioned in video for v4a and keep all stock settings for music app too make sure virtual 3d and 7. 1 surround effect is enabled.
And then play music.
Specially how can i describe sound is like i am hearing music sound separated for each ear phones pairs sitting in larg cinema hall sound is coming from All directions that's aswome though such effects are available for doulby and v4a but here that impact is very good as compared to them.
May be earphones are also reposible for best sound.
Here earphones i am using
Click to expand...
Click to collapse
I hear a Ms latency only (differential surround in v4a) with this and audiophile, I'll try this with your settings and see how it works out
Over the years I have probably tried almost everything there is to try of the high-end and higher-end(Free,paid and costly)type music player applications out there.Currently running the 7+1 Surround Sound and 3D based X3 Music Player was in fact an actually startling surprise sound wise,I can recall.So natural,with an audio transparency so visible and audio tactile that I actually teared up from emotional sensory overload the first time I listened to it.And still may do yet,for the very same reason.But I will definitely also try this combination.
So only with mp3s and only with headphones? On top of that you have to install a module, disable dev options (cringy), hide from magisk just to open?
Basically this tells me "IF" this module were to brick my phone I would be SOL due to no longer having dev options enabled..... Thank you for the work but I'll pass on this one.
dgunn said:
So only with mp3s and only with headphones? On top of that you have to install a module, disable dev options (cringy), hide from magisk just to open?
Basically this tells me "IF" this module were to brick my phone I would be SOL due to no longer having dev options enabled..... Thank you for the work but I'll pass on this one.
Click to expand...
Click to collapse
Its not deal breaking and it will not brick anything.
3d virtual surround sound is top notch as compared to any mod like v4a, doulby atmos or audiofx
I just rooted my Pixel 3 and one of the main reasons was that I could use Viper again. But to my dismay, it doesn't work! On top of that, I discovered that Viper has a maximum sample rate of 48kHz, which means I can't use my Sony speaker at its maximum potential of 96kHz with LDAC. So, I went looking for other audio MODs without this limitation and I stumbled upon Ainur James DSP. Now this works great, but it has a very annoying bug. Whenever a notification appears, the sound of the notification causes the music to stop producing any noise, while it doesn't even pause! Is there any fix for this, and if not can anyone recommend me any better mod?
shreyamt said:
I just rooted my Pixel 3 and one of the main reasons was that I could use Viper again. But to my dismay, it doesn't work! On top of that, I discovered that Viper has a maximum sample rate of 48kHz, which means I can't use my Sony speaker at its maximum potential of 96kHz with LDAC. So, I went looking for other audio MODs without this limitation and I stumbled upon Ainur James DSP. Now this works great, but it has a very annoying bug. Whenever a notification appears, the sound of the notification causes the music to stop producing any noise, while it doesn't even pause! Is there any fix for this, and if not can anyone recommend me any better mod?
Click to expand...
Click to collapse
Use a wide band dedicated EQ app for adjusting the sound to your own personal likings, it will literally help with improving your sound experience.
shreyamt said:
I just rooted my Pixel 3 and one of the main reasons was that I could use Viper again. But to my dismay, it doesn't work! On top of that, I discovered that Viper has a maximum sample rate of 48kHz, which means I can't use my Sony speaker at its maximum potential of 96kHz with LDAC. So, I went looking for other audio MODs without this limitation and I stumbled upon Ainur James DSP. Now this works great, but it has a very annoying bug. Whenever a notification appears, the sound of the notification causes the music to stop producing any noise, while it doesn't even pause! Is there any fix for this, and if not can anyone recommend me any better mod?
Click to expand...
Click to collapse
Viper works fine for me on my pixel 3 running March update. Installed from magisk. Make sure your installing busybox as well.
Here's a SS of which one I installed
FilthyFord said:
Here's a SS of which one I installed
Click to expand...
Click to collapse
Thanks for your help. But as I mentioned in my original post, I wouldn't prefer Viper as it limits the sound sample rate to 48 kHz.
xFirefly93 said:
Use a wide band dedicated EQ app for adjusting the sound to your own personal likings, it will literally help with improving your sound experience.
Click to expand...
Click to collapse
Can you please tell me some apps?
shreyamt said:
Thanks for your help. But as I mentioned in my original post, I wouldn't prefer Viper as it limits the sound sample rate to 48 kHz.
Click to expand...
Click to collapse
I thought viper was what you were looking for. Or is viper4androidFX different?
Hey guys switched over from a rooted HTC U12+ with v4a and I miss having the audio mods. Having a Snapdragon S10+ means the dream of having Viper again will most likely never happen.
I understand Samsung has Dolby Atmos built in and with the app Sound Assistant you can save multiple EQ presets. Does anyone have any they can share. I also notice the presets use a ".aaf" file type and was wondering if it was possible to create a preset using EQ settings from audio applications that use .aaf files like Logic or Pro Tools. What kind of audio mods or EQ settings can be done on a stock non-rooted/bootloader locked phone?
I'm looking to buy this phone and audio is quality is top priority. Though I am concerned Dolby Atmos may have a "artificial" sound to my ears, so would ideally like to have the option to turn it off. According to Lenovo this doesn't seem possible.
However I stumbled upon the Dolby Atmos Control App here https://forum.xda-developers.com/oneplus-7-pro/how-to/guide-dolby-atmos-control-how-to-real-t4103773 - technically this should work with the Z6 Lite / Youth Edition / K10 Note as it supports Dolby Atmos. Can anyone confirm this apk works and can turn off Dolby Atmos?
Also how's the sound quality on the phone?