General MIUI 12.0.9 is out for sunny devices - Redmi Note 10

Update is out for sunny devices MIUI12.0.9

i hope i can flash this on my sunny device .. man it was a hell moment flashing miui 12.0.7 using fastboot.. it always bootloop

pihpih95 said:
i hope i can flash this on my sunny device .. man it was a hell moment flashing miui 12.0.7 using fastboot.. it always bootloop
Click to expand...
Click to collapse
Installed without any issue in my Sunny from 12.0.7.0. Rebooted fine as well.

damnsaif said:
Installed without any issue in my Sunny from 12.0.7.0. Rebooted fine as well.
Click to expand...
Click to collapse
i forgot to edit the earlier post , it was my win10 that sucks . it detected my tissot too meanwhile my tissot didnot enter the bootloader at all , that is why it make sunny bootloop, after i flash my sunny in my linux machine , it boot just right into the miui without any issues, so yeah im with my sunny on miui 12.0.9

Is there a link to download fastboot rom V12.0.9.0.RKGMIXM so I can keep my phone rooted?

Not for now.
I extracted boot.img and saved him here:
boot.img Miui 12.0.9.0 Mojito
Copy to your phone, root with Magisk, modified boot flash with fastboot.

Thanks - just out of curiosity, how did you extract boot.img?

Tool "payload extractor".

Related

Help!! Twrp not booting

I had twrp installed and then i flashed cm13
A fews days later i flashed xposed using twrp and after flashing, it said that stock recovery was trying to replace twrp and asked to swipe to disable it.
i swiped it.
now when i try to boot to recovery, its stuck at mi logo
everything else working fine
just i cant boot into recovery now.
i flashed twrp again using fastboot
but still i m unable to boot to recovery.
Any help would be appreciated
Thanks in advanvce
Flash it using miflash tool.
You have tried flashing using miflash before , haven't you?
Then the procedure is the same, only this time you have to rename twrp file into recovery.img then overwrite original recovery.img in the target miflash folder. Don't forget to remove other files you don't want to be flashed to your device I.e system , data , etc , just keep .XML files or other text files .
Then after you think ready just go flash it
Good luck sir
Yokohart said:
Flash it using miflash tool.
You have tried flashing using miflash before , haven't you?
Then the procedure is the same, only this time you have to rename twrp file into recovery.img then overwrite original recovery.img in the target miflash folder. Don't forget to remove other files you don't want to be flashed to your device I.e system , data , etc , just keep .XML files or other text files .
Then after you think ready just go flash it
Good luck sir
Click to expand...
Click to collapse
Thanks for the reply
will try that
hope it works
yashthakur797 said:
Thanks for the reply
will try that
hope it works
Click to expand...
Click to collapse
You're welcome and good luck
Now I realised that there is no problem with twrp
Actually booting to recovery is taking too long
Whenever I boot to recovery, it shows the mi logo for 5-10 mins and then twrp boots up
Any idea what is the reason for it??
yashthakur797 said:
Now I realised that there is no problem with twrp
Actually booting to recovery is taking too long
Whenever I boot to recovery, it shows the mi logo for 5-10 mins and then twrp boots up
Any idea what is the reason for it??
Click to expand...
Click to collapse
Because you're still on stock firmware , maybe?
Yokohart said:
Because you're still on stock firmware , maybe?
Click to expand...
Click to collapse
i have installed the cm13 firmware
that might not be the reason
yashthakur797 said:
i have installed the cm13 firmware
that might not be the reason
Click to expand...
Click to collapse
which cm13 firmware by who?
actually if you have cm13 firmware the boot logo should change to cm13 logo.
cm13 firmware provided by thestrix
in my case i get the mi logo and then cm13 boot animation
the normal boot speed is fine
but when i boot to recovery, it takes a long time

One Plus X soft (?) bricked

Hi guys,
Before you say again a topic on a non bricked One Plus X, I would like to let you know that I've checked and try almost all of the tutorial I've seen on xda and one plus forum.
I was on CM14.1 with this ROM : https://forum.xda-developers.com/oneplus-x/orig-development/rom-cyanogenmod-14-onyx-t3452150
Unfortunately, I made the 25-12-2016 update and it totally broke up the phone..
I download the OnePlus X OxygenOS 3.1.4 on the One Plus website. So I flash it on the stock recovery, it tells me "Install success" then I reboot and it stays on the bootlogo.
For information, I can't access the oem unlock menu if needed, but when I ask the oem device info it says unlocked. The phone is detected by the computer sometimes with unknown device and sometimes correctly with the qualcomm drivers..
I have a back up made from TWRP, I can access the device by the fastboot mode, it seems that all the operations written here worked but it doesn't install or even boot on TWRP..
Thanks for your help guys.
Are you using latest TWRP from website think version 3.0.3?
Exodusche said:
Are you using latest TWRP from website think version 3.0.3?
Click to expand...
Click to collapse
I'm not even using TWRP, since I can't boot on it.. But I tried to flash the twrp-3.0.2-2 from blue spark v41, after the installation via Flashboot, it doesn't boot up on the recovery..
So after flashing TWRP you use fastboot boot recovery.img and nothing happens?
Exodusche said:
So after flashing TWRP you use fastboot boot recovery.img and nothing happens?
Click to expand...
Click to collapse
Exactly, the phone is stuck on the one plus logo..
defqon_1 said:
Exactly, the phone is stuck on the one plus logo..
Click to expand...
Click to collapse
If you did not unlocked bootloader properly then also you might face the problem...
to unlock bootloader: https://forum.xda-developers.com/oneplus-x/general/discussion-how-to-root-oneplus-x-t3242830
make sure you follow all the step. (If you didn't followed these steps then lock bootloader {fastboot oem lock} and unlock using this mathod, worked for me.)
Falsh this kernal after flashing rom and gapps, https://forum.xda-developers.com/oneplus-x/development/kernel-arsenic-kernel-r2-t3422020
Don't forget to hit :good:
Divyesh49 said:
If you did not unlocked bootloader properly then also you might face the problem...
to unlock bootloader: https://forum.xda-developers.com/oneplus-x/general/discussion-how-to-root-oneplus-x-t3242830
make sure you follow all the step. (If you didn't followed these steps then lock bootloader {fastboot oem lock} and unlock using this mathod, worked for me.)
Falsh this kernal after flashing rom and gapps, https://forum.xda-developers.com/oneplus-x/development/kernel-arsenic-kernel-r2-t3422020
Don't forget to hit :good:
Click to expand...
Click to collapse
Didn't work. I tried to lock and then unlock to be sure but not is stay in false for tempered AND unlocked.
So I don't have any idea on how make android back on my phone.
I just have access to Fastboot mode. No recovery, nothing else..
EDIT : phone is not starting anymore. I try to charge it hoping it just a low battery problem..
You should send it to RMA
Trimis de pe al meu Redmi 3S folosind Tapatalk
Finally, I resolved the problem I don't know how but for the moment I have stock recovery and stock rom ! :laugh:
I will wait for a stable rom for Nougat. Thanks for the help guys !
PS : how do I close or write resolved at the top of the subject ?
Help Pls
defqon_1 said:
Finally, I resolved the problem I don't know how but for the moment I have stock recovery and stock rom ! :laugh:
I will wait for a stable rom for Nougat. Thanks for the help guys !
PS : how do I close or write resolved at the top of the subject ?
Click to expand...
Click to collapse
I have the same problem, access to fastboot but no to recovery. How do you resolved it?
UBCM said:
I have the same problem, access to fastboot but no to recovery. How do you resolved it?
Click to expand...
Click to collapse
Start by seeing if you can fastboot flash stock recovery from any 2.X.X OOS. Then fastboot flash twrp 3.0.2. If your on new bootloader meaning latest ROMs or OOS3 then you need to boot into 3.0.2 and from there you can flash IMG of twrp 3.0.3. Make sure you boot right back into recovery after flashing any twrp or it won't stick. This worked for me when I lost my recovery twice but always remember at your own risk. Not responsible if you make your phone into a paper weight.
Fix It!
Exodusche said:
Start by seeing if you can fastboot flash stock recovery from any 2.X.X OOS. Then fastboot flash twrp 3.0.2. If your on new bootloader meaning latest ROMs or OOS3 then you need to boot into 3.0.2 and from there you can flash IMG of twrp 3.0.3. Make sure you boot right back into recovery after flashing any twrp or it won't stick. This worked for me when I lost my recovery twice but always remember at your own risk. Not responsible if you make your phone into a paper weight.
Click to expand...
Click to collapse
Done! finally i can reinstall stock rom and recovery with drivers by usb.
UBCM said:
I have the same problem, access to fastboot but no to recovery. How do you resolved it?
Click to expand...
Click to collapse
I have tried multiple tools that I find on XDA. I put all the zip files like bootloader update and rom on my sdcard. And by a great night, the OOS 3.1.4 finally booted up ! So I don't have a miracle solutions that can help you..
Done
defqon_1 said:
I have tried multiple tools that I find on XDA. I put all the zip files like bootloader update and rom on my sdcard. And by a great night, the OOS 3.1.4 finally booted up ! So I don't have a miracle solutions that can help you..
Click to expand...
Click to collapse
Don't worry i have restored my OPX 5 days ago. I used the method of this video: https://youtu.be/R4SVSovw4Jo and files from this thread: https://forum.xda-developers.com/oneplus-x/general/guide-mega-unbrick-guide-hard-bricked-t3272108 , if it can help someone.

Need Help Please..

Guys I've been facing a severe problem in my redmi note 4 sd . The problem is that all the sensors of my mobile are not working like(auto rotation,compass,magnetic sensor,hall sensor...etc)
The story behind this is that I've flashed color os rom(it didn't even booted for me) and after coming back to miui I'm facing this problem.
I've clean flashed a ton times but the sensors are not working....
Please help me friends...
m.shyamsundar37 said:
Guys I've been facing a severe problem in my resume note 4 sd . The problem is that all the sensors of my mobile are not working like(auto rotation,compass,magnetic sensor,hall sensor...etc)
The story behind this is that I've flashed color os rom(it didn't even booted for me) and after coming back to miui I'm facing this problem.
I've clean flashed a ton times but the sensors are not working....
Please help me friends...
Click to expand...
Click to collapse
Do a fastboot flash ..
You should post it in the proper section.
https://forum.xda-developers.com/redmi-note-4/help
I've flashed via fast boot but still im facing the problem
I had this problem for my 'redmi note 3' before. I flashed 'persist.img' through fastboot. Note: that is for redmi note THREE.
m.shyamsundar37 said:
I've flashed via fast boot but still im facing the problem
Click to expand...
Click to collapse
arunak said:
I had this problem for my 'redmi note 3' before. I flashed 'persist.img' through fastboot. Note: that is for redmi note THREE.
Click to expand...
Click to collapse
Help him find the persist.img ,.. Also did you extract that img from fastboot ROM ?
arunak said:
I had this problem for my 'redmi note 3' before. I flashed 'persist.img' through fastboot. Note: that is for redmi note THREE.
Click to expand...
Click to collapse
Is your problem solved now??
m.shyamsundar37 said:
Guys I've been facing a severe problem in my redmi note 4 sd . The problem is that all the sensors of my mobile are not working like(auto rotation,compass,magnetic sensor,hall sensor...etc)
The story behind this is that I've flashed color os rom(it didn't even booted for me) and after coming back to miui I'm facing this problem.
I've clean flashed a ton times but the sensors are not working....
Please help me friends...
Click to expand...
Click to collapse
friend, flash this zip and you will solve the problem of sensors, but I recommend you first do a deep cleaning, then flash this file and then the rom you want
m.shyamsundar37 said:
Is your problem solved now??
Click to expand...
Click to collapse
Yes
Edinsonpol said:
friend, flash this zip and you will solve the problem of sensors, but I recommend you first do a deep cleaning, then flash this file and then the rom you want
Click to expand...
Click to collapse
I'll try it bro and report u
Edinsonpol said:
friend, flash this zip and you will solve the problem of sensors, but I recommend you first do a deep cleaning, then flash this file and then the rom you want
Click to expand...
Click to collapse
Still not sliced...bro thanks for your help
m.shyamsundar37 said:
I'll try it bro and report u
Click to expand...
Click to collapse
Still not solved bro thanks for your help.....
Waiting for a perfect solution....
I've had this sensors problem in my redmi note 4 device, i flashed the fix & it solved all but created a new problem, i can't go back to stock rom.
The "persist.img" file in this fix belongs to someone else RN4 phone. Now I'm stuck with his mi account in my device. It needs his password to unlock. Ur only option is to use custom roms
You can find the persist.img file inside the fastboot zip from here.
It isn't flashed by default with Mi Flash but it's there.
BubuXP said:
You can find the persist.img file inside the fastboot zip from here.
It isn't flashed by default with Mi Flash but it's there.
Click to expand...
Click to collapse
Persist.img file comes with fastboot zip is around 5mb, but actual file size is more than 32mb, i flashed manually the smaller one and phone doesn't boot, keeps restarting in boot logo. I had to flash this sensor fix again to unbrick.
Ondipuli said:
I've had this sensors problem in my redmi note 4 device, i flashed the fix & it solved all but created a new problem, i can't go back to stock rom.
The "persist.img" file in this fix belongs to someone else RN4 phone. Now I'm stuck with his mi account in my device. It needs his password to unlock. Ur only option is to use custom roms
Click to expand...
Click to collapse
OK bro thanks and what if I flash the persist.IMG from the fastboot rom and not from some others mobile??
Persist.img file in fastboot rom is low in size, below 5mb, if you flash it, you get bootloop. Actual size around 32mb. U can see it in the fix file.
The partition on the phone is 32 MB. If the persist.img file is only 5 MB it could mean that the data inside the partition is only 5 MB, it doesn't have to be 32 MB.
Take the recovery partition for example, it's bigger than the size of the TWRP .img file, but it doesn't mean that TWRP file is corrupted.
However, to flash persist partition you need the unlocked bootloader and a modified fastboot.exe version that can restart the phone in EDL mode, and from there you can flash every partition with MiFlash.
Of course, data size of Persist.img partition maybe only 5mb, but after flashing the that comes with fastboot rom, all i got is an infinite bootloop. Even miflash doesn't flash this partition, I've seen it in miflash log file.
I tried to flash the persist image, but it simply refuse to do it, even with MiFlash (you can enable the flashing of persist.img by modifying the .bat file that MiFlash will use to flash).
As I write on my post above, to flash persist.img you need to be in EDL mode, but I didn't tried it personally, so I don't know if it will cause bootloop even this way (but I read of people resolving problems this way, so I don't think it will do harm).

Redmi note 3 bricked brickest

I bricked my Note 3 while trying to to flash Miui update. I have tried all sorts of flashing miui roms with miflash but mobile restarts after its reached Mi logo with Android at bottom. However I could flash twrp and have tried all wipe all dvilk, cache, system but similar problem.
If u guys could help me to get my cell. Back.
varin11 said:
I bricked my Note 3 while trying to to flash Miui update. I have tried all sorts of flashing miui roms with miflash but mobile restarts after its reached Mi logo with Android at bottom. However I could flash twrp and have tried all wipe all dvilk, cache, system but similar problem.
If u guys could help me to get my cell. Back.
Click to expand...
Click to collapse
Go to twrp and format data.and Type YES to format. This will decrypt and erase data and internal storage.
And reboot.
---------- Post added at 10:05 AM ---------- Previous post was at 09:39 AM ----------
How u flashed miui update?
Using twrp or fastboot method?
naik2902 said:
Go to twrp and format data.and Type YES to format. This will decrypt and erase data and internal storage.
And reboot.
---------- Post added at 10:05 AM ---------- Previous post was at 09:39 AM ----------
How u flashed miui update?
Using twrp or fastboot method?
Click to expand...
Click to collapse
I accidentally flashed fastboot Miui update with TWRP
I accidentally flashed Miui update with TWRP.
varin11 said:
I accidentally flashed Miui update with TWRP.
Click to expand...
Click to collapse
So now ur phone is ok?
naik2902 said:
So now ur phone is ok?
Click to expand...
Click to collapse
I currently have flashed CM 14.1 Rom but this rom have some bugs like casting doesn't work on this.
I want to get back to MIUI. Tried RR and Lineage rom but it gives error 7 on flashing.
Will try the method you have suggested.Anything else do u suggest if the format data doesn't work
Do u think my boot loader is unlocked since I could install TWRp and custom Rom although I never opted for official boot loader unlock since it always gives error ''couldn't unlock'.
will wait for your reply before formatting data.
varin11 said:
I currently have flashed CM 14.1 Rom but this rom have some bugs like casting doesn't work on this.
I want to get back to MIUI. Tried RR and Lineage rom but it gives error 7 on flashing.
Will try the method you have suggested.Anything else do u suggest if the format data doesn't work
Do u think my boot loader is unlocked since I could install TWRp and custom Rom although I never opted for official boot loader unlock since it always gives error ''couldn't unlock'.
will wait for your reply before formatting data.
Click to expand...
Click to collapse
Just put phone in fastboot mode
And check bootloader status using command
fastboot oem device-info
Unlock= true ?
Device unlock=False
Its locked I think.
I tried formatting the dataand later flashing the MIUI rom but same error it goes to MI logo with Android logo down and the phone restarts.Any thing else u suggest.
varin11 said:
Device unlock=False
Its locked I think.
Click to expand...
Click to collapse
Unlock is false.
Ur bootloader is relocked.
Put phone in edl mode.
And Flash fastboot rom using miflashtool.
https://forum.xda-developers.com/redmi-note-3/how-to/guide-reboot-to-edl-mode-fastboot-test-t3398718
I tried flashing again in edl mode but the mobile restarts at Mi logo ( Android logo at bottom). Have tried flashing beta MIUI rom also but same error.
varin11 said:
I tried flashing again in edl mode but the mobile restarts at Mi logo ( Android logo at bottom). Have tried flashing beta MIUI rom also but same error.
Click to expand...
Click to collapse
Your bootloader is locked .Unlock the bootloader first and than flash the Rom again. Previously I had same problem, my problem was solved by unlocking the bootloader and clean flashing xiaomi.eu ROM through TWRP. If you have twrp installed than go for xiaomi.eu ROM. It is the best MIUI ROM. Hope this will help you.
varin11 said:
I tried flashing again in edl mode but the mobile restarts at Mi logo ( Android logo at bottom). Have tried flashing beta MIUI rom also but same error.
Click to expand...
Click to collapse
Are u flashing zip or tgz file. ?
Flash fastboot tgz rom with clean all option.
If rom is shown succesfully flashed on computer without any error showing. Then ok. no issues.
Firsboot takes time 10 to 15 min With milogo and Android.
rjrulz007 said:
Your bootloader is locked .Unlock the bootloader first and than flash the Rom again. Previously I had same problem, my problem was solved by unlocking the bootloader and clean flashing xiaomi.eu ROM through TWRP. If you have twrp installed than go for xiaomi.eu ROM. It is the best MIUI ROM. Hope this will help you.
Click to expand...
Click to collapse
How to unlock the boot loader.Mi unlock gives error cant unlock.
naik2902 said:
Are u flashing zip or tgz file. ?
Flash fastboot tgz rom with clean all option.
If rom is shown successfully flashed on computer without any error showing. Then ok. no issues.
Firsboot takes time 10 to 15 min With milogo and Android.
Click to expand...
Click to collapse
I am using tgz file to flash.Although the flashing is shown success but the mobile doesn't restart after the flash by itself.When I restart the phone it restarts by itself at MI log with Android logo at bottom.
I have tried flashing recovery from from TWRP also but similar error.
varin11 said:
I am using tgz file to flash.Although the flashing is shown success but the mobile doesn't restart after the flash by itself.When I restart the phone it restarts by itself at MI log with Android logo at bottom.
I have tried flashing recovery from from TWRP also but similar error.
Click to expand...
Click to collapse
Lol. After flash.when u restart phone the phone will start at android logo.
What u expect? haloween logo?
Then keep it on android logo for 15min. It will boot into miui. Leave it for 15 min.
Why did u flash twrp before? after flashing fastboot rom phone should boot into miui . just leave on android logo for 15 min . It will boot into miui.
http://bigota.d.miui.com/8.11.22/ke...22_20181122.0000.00_6.0_global_b2a5c7e388.tgz
naik2902 said:
Lol. After flash.when u restart phone the phone will start at android logo.
What u expect? haloween logo?
Then keep it on android logo for 15min. It will boot into miui. Leave it for 15 min.
Why did u flash twrp before? after flashing fastboot rom phone should boot into miui . just leave on android logo for 15 min . It will boot into miui.
http://bigota.d.miui.com/8.11.22/ke...22_20181122.0000.00_6.0_global_b2a5c7e388.tgz
Click to expand...
Click to collapse
U r right but in my case the mobile reboots itself once it reaches the Android logo.
Updated TWRP and finally could install RR rom based on Android 8.1. Great rom better than MIUI and don't want MIUI now. Thanks for the help guys.

HI I just need a QUICK help!!

My Poco sensors stoped working while o was flashing some ROM I don't remember but it was maybe an sGSI.
After flashing alot of vendors on miui or pixel e, iam still facing the same issue.
Any help would really be appreciated
Stock with miflash.....and always backup...lesson learned
seems like persist.img is corrupted!
if you have fastboot rom (miui10.3.7 (2.7gb) , extract it, and further extract it, i will come something 8 gb in total!
inside images folder there will be persist.img
flash that img file, in TWRP /persist PARTITION (BE CARE FUL !!!!!!!!!!!!!!!!)
or better use ORANGE FOX RECOVERY to flash PERSIST.img
then reboot device and check!
if it still doesnt work then use miflasher, and flash this FASTBOOT rom from image folder!
REMEMBER!!!!!!!! don't tick the box, "FLASH ALL AND LOCK" this will relock your bootloader! , simply select "FLASH ALL" button in miFLASHER (down-right)
YasuHamed said:
seems like persist.img is corrupted!
if you have fastboot rom (miui10.3.7 (2.7gb) , extract it, and further extract it, i will come something 8 gb in total!
inside images folder there will be persist.img
flash that img file, in TWRP /persist PARTITION (BE CARE FUL !!!!!!!!!!!!!!!!)
or better use ORANGE FOX RECOVERY to flash PERSIST.img
then reboot device and check!
if it still doesnt work then use miflasher, and flash this FASTBOOT rom from image folder!
REMEMBER!!!!!!!! don't tick the box, "FLASH ALL AND LOCK" this will relock your bootloader! , simply select "FLASH ALL" button in miFLASHER (down-right)
Click to expand...
Click to collapse
mi flash failed to do the job and came out with error. booted fine but sensors still broken.
twrp and orange fox have no persist.img chose when flashing.
anyways thx 4 help. i hope i can get out outta this:crying::crying:
iam using miui 9.6.18 bcz i want oreo
lokixd4x4 said:
mi flash failed to do the job and came out with error. booted fine but sensors still broken.
twrp and orange fox have no persist.img chose when flashing.
anyways thx 4 help. i hope i can get out outta this:crying::crying:
iam using miui 9.6.18 bcz i want oreo
Click to expand...
Click to collapse
according to this video https://youtu.be/JKShaUdpvQw?t=374 its platform file issue,
download latest version from
https://forum.xda-developers.com/android/software/tool-platform-tools-adb-fasbootdrivers-t3061441
extract platform folder, put FASTBOOT FILES of MIUI rom in Platform folder and then try flashing
also
put everything in root C:/ and only one folder "C:\images"
long paths are not recomended for MIflasher!
@YasuHamed bro I am facing the exact same issue with a window popup on screen says find device is corrupted your device is unsafe now. Did you find a solution . Please help .brother.
abhisheksh9999 said:
@YasuHamed bro I am facing the exact same issue with a window popup on screen says find device is corrupted your device is unsafe now. Did you find a solution . Please help .brother.
Click to expand...
Click to collapse
i gave up and started using custom roms! they are closer to Stock android and have amazing customizations!
Evolution / Havoc / AeX on android 10 is amazing!
Reloaded OS (android10) is CAF based rom and its faster than others but have no customizations!
CR droid has maximum customizations but its little laggy!
you may also use
Masik13.3 and XiaomiEu roms which are Modified MIUI versions! ( google MIUI ROM BUILDER) and you can predefine features!
these roms can them be flashed via Twrp!
lokixd4x4 said:
mi flash failed to do the job and came out with error. booted fine but sensors still broken.
twrp and orange fox have no persist.img chose when flashing.
anyways thx 4 help. i hope i can get out outta this:crying::crying:
iam using miui 9.6.18 bcz i want oreo
Click to expand...
Click to collapse
Did you find any way to fix the sensors?
I think i too made the same mistake some two months back after flashed peplus rom.. i noticed it only recently.

Categories

Resources