Related
Hello could anyone please help me with rooting my zoostorm sl8 mini running ICS. I just don't know which rooting program to use and with one will work. I have search the web now for days and cant find anything.
Please Help!
Thanks:good:
Use the Qemu exploit
This can device can be rooted using DoomLords Xperia script. I have ported the script to linux as well for Ubuntu users,
The original script is here : http://forum.xda-developers.com/showthread.php?t=1601038
I haven't tested the Windows script, but I assume it will work as I haven't changed anything, the Linux script has been fully tested and I have successfully rooted the sl8 mini using it.
For Windows see below:
1) Download the attached zip file and Super1Click zip file ( http://download.cnet.com/SuperOneClick/3000-2094_4-75447027.html ).
2) Unzip the zip files into a new folders (you can use 7-zip for this : http://www.7-zip.org/)
3) Power on the Zoostorm Sl8 Mini and boot it normally.
4) Go into settings, developer options and tick USB debugging
5) Go to settings, security and tick Allow installtion of non-Market Apps
6) Connect the table to the PC with a USB cable.
7) When the new Hardware Found Wizard find the Android device and can't find a driver, select install from speficic location and browse to drivers folder under the folder you just unzipped the Super1click file to.
8) The driver should install from here and will show as an Acer Android device.
9) If Windows complains about the driver not being signed tell it to continue anyway.
10) Reboot the Windows PC if requested by the Hardware installation Wizard.
11) Discconect and replug the USB cable.
12) Open a windows command prompt
13) Navigate to the folder where the unzipped rootsl8mini.zip files are.
14) type runme.bat
15) Read the blurb on the screen and press any key to root your tablet.
16) The Sl8 mini will reboot several times, after it has reboot for the last time your sl8 mini will now be rooted.
For Linux (Ubuntu Precise Pangolin)
1) Install Android SDK, make sure the folder where adb is located is in your shell path variable. See link for Ubuntu instructions (http://www.liberiangeek.net/2012/07...-androidsdk-in-ubuntu-12-04-precise-pangolin/)
2) Download the attached rootsl8mini.zip file and unzip it into a folder.
3) Go into the folder where you unzipped the file and make the runme.bat.sh file executable. (Myhost:$ chmod 777 runme.bat.sh)
4) Power on the Zoostorm Sl8 Mini and boot it normally.
5) Go into settings, developer options and tick USB debugging
6) Go to settings, security and tick Allow installtion of non-Market Apps
7) Connect the tablet to the PC with the USB cable.
8) Execute the runme.bat.sh script (Myhost:$ ./runme.bat.sh)
9) Read the blurb on the screen and press any key to root your tablet.
10) The Sl8 mini will reboot several times, after it has reboot for the last time your sl8 mini will now be rooted.
Enjoy
Thank you, do I go to unzipped file using command prompt?
Thanks
I have tried to root the tablet and it wont install the drivers, it keeps saying that the file is corrupted or missing.
I'am running windows 8 64.
any suggestion's why it is doing this?
Many thanks :good:
I`m a noob to the Zoostorm. Are there any JB / CM10 ports for it?
Are they known as another name elsewhere in this forum?
Can anyone shed any light on this? Fantastic write-up by mikel by the way. Will test as soon as the mother-in-law gets hers for xmas from us!
Superb MIKEL543 i have done it, thank you so much, it took me a bit to figure it out but i managed to do it YAY..lol.
Now the problem is i cant watch and films from google play or flixster as it say that it cant because my Tablet is rooted .
i have tried everything and cant get it to work! :good:
easy way to root : http://zoostormsl8.blogspot.co.uk/2013/02/root-zoostorm-sl8-mini-3310-9506.html
download and update the zip
Bought this tablet as a gift for my father and assumed that connecting it to a usb keyboard would be straightforward (yeap android noob ) . My question is , is that even possible? Is there a custom rom that can be installed, I presume after rooting the device that enables usb host mode?
hello sir,
i have rooted my micromax ninja a 87 by this ;process given below
unlock root says it has rooted my phone and there i have supersu app too in my mobile when i open it it say su binary needs to be updated i click on ok and installation failed
i then installed superuser latest version and tries to update my binary again but it say that gaining root access .... Fail
i then tried SU update fixer but it also shows Gaining root access fail ...
please help i really want to root my phone and make full use of it thanks,
Aditya
1. Download jdk 32bit only from here, Android sdk from here, Unlock root from here, adb_usb.ini from here and A87 drivers from here.
2. Install jdk
3. install Android sdk, after installing open sdk manager form star and select "android sdk platform-tools" and "google usb driver" unselect the rest, click install packages. After installing put the adb_usb.ini file in "C:\Users\(your PC name)\.android"
4. Now on your phone goto settings>applications>development>enable usb debugging and connect usb cable, it should say usb debugging mode and show a little green android icon on the topleft (if not then reinsert cable or re enable usb debugging)
5. Windows will detect the device, let it stabilize then extract A87 drivers to a location say "C:/drivers"
6. Now goto start type "device manger" open device manager, you wil find "android adb interface" right click upgrade drivers and lead it to a location of your extracted drivers, do the same with other devices you get with an exclamation icon. (dont worry if you dont find other devices, its fine)
7. Install Unlock root, open it and click root, it wil ask for the device select micromax A87 and Your done !!!
8. Press Thanks !! Have a nice day !!
Aditya Kaushik said:
hello sir,
i have rooted my micromax ninja a 87 by this ;process given below
unlock root says it has rooted my phone and there i have supersu app too in my mobile when i open it it say su binary needs to be updated i click on ok and installation failed
i then installed superuser latest version and tries to update my binary again but it say that gaining root access .... Fail
i then tried SU update fixer but it also shows Gaining root access fail ...
please help i really want to root my phone and make full use of it thanks,
Aditya
1. Download jdk 32bit only from here, Android sdk from here, Unlock root from here, adb_usb.ini from here and A87 drivers from here.
2. Install jdk
3. install Android sdk, after installing open sdk manager form star and select "android sdk platform-tools" and "google usb driver" unselect the rest, click install packages. After installing put the adb_usb.ini file in "C:\Users\(your PC name)\.android"
4. Now on your phone goto settings>applications>development>enable usb debugging and connect usb cable, it should say usb debugging mode and show a little green android icon on the topleft (if not then reinsert cable or re enable usb debugging)
5. Windows will detect the device, let it stabilize then extract A87 drivers to a location say "C:/drivers"
6. Now goto start type "device manger" open device manager, you wil find "android adb interface" right click upgrade drivers and lead it to a location of your extracted drivers, do the same with other devices you get with an exclamation icon. (dont worry if you dont find other devices, its fine)
7. Install Unlock root, open it and click root, it wil ask for the device select micromax A87 and Your done !!!
8. Press Thanks !! Have a nice day !!
Click to expand...
Click to collapse
Go here for details :
Micromax A87
hello sir,
i have rooted my micromax ninja a 87 by this ;process given below
unlock root says it has rooted my phone and there i have supersu app too in my mobile when i open it it say su binary needs to be updated i click on ok and installation failed
i then installed superuser latest version and tries to update my binary again but it say that gaining root access .... Fail
i then tried SU update fixer but it also shows Gaining root access fail ...
please help i really want to root my phone and make full use of it thanks,
Aditya
Click to expand...
Click to collapse
I too faced the same problem a while ago :crying:, but at last got its solution...
Do this only if you Have CWM(clockworks mod) installed on your device...
If not then goto - http://forum.xda-developers.com/showthread.php?t=1987020
And find it there...
Firstly, Get a rooted custom/stock ROM and save it in your device's sd card,
Then goto ClockWorks Recovery ( First power off your device, then hold volume up and power key untill superfone logo displays to get into recovery menu), (scroll up and down for three times to enable the power button with vol. up and down key)open 'mounts and storage' menu
Then choose 'format/system' . After the completion Goto main menu and choose 'install zip from sd card' -> choose zip -> And install it.
And after completion, Reeboot. DONE, your got a rooted device...!
Following the excelent post by member shanti77 here I was able to root my Medion P4502 (MD 98942; Android 4.4.2; Kernel 3.4.67) but with slight variations.
The main difference is that instead of iRoot I used Kingo Root. I know that some people would also prefer to use other options and therefore I decided to write this post.
Here are the steps:
1. Download and install Engineer Mode MTK Shortcut from Google Play
2. Open this app and under Log and Debugging -> User2Root tap on the Root button.
3. Switch on "Debugging Mode" on the phone:
-open Settings, then scroll all the way down to About phone. Once there, tap Software information, then tap Build number seven times. You'll see a notification alerting you that you are now a developer.
- go back to the main Settings page and you'll see a new entry for Developer options. Enable it and tick USB debugging option.
4. Download and install Kingo Root on your Windows box.
5. Start Kingo Root, connect your phone with USB in CD connection mode (not in Media connection mode!), click OK on the pop-up asking you to trust the computer and allow it to install necessary drivers in order to connect.
6. When connected, Kingo Root will recognize the phone as Lenovo P4502 and claim that it already is rooted. Don't be fooled by this and tap the Root Again button.
7. Afterwards update SuperSU apk (actual root access gatekeeper) installed by Kingo Root, set User2Root back to User (see p.2 above) and disable Developer Options in phone Settings (see p.3 above).
I have been looking how to do this for a day now with no luck. All the other applications seem to be for early Android wear versions less than 2.0 or Android 5.1.1 or less.
Option 1 (Faster)
1: Install ADB on your computer. https://www.xda-developers.com/install-adb-windows-macos-linux/
2: Enable Developer Options on your wear watch. https://forum.xda-developers.com/android-wear/development/guide-how-to-connect-adb-wifi-t3368602
3: Make sure bluetooth is off, wifi on and connected to same network as laptop.
4: Turn on debug over wifi option in developer options and wait for it to show your IP.
5: On windows, make sure platform tools are on the main drive. Ex (C
6: Copy your APK files into the same folder.
7: Inside the folder, press shift and right click. Then press "open with CMD here or powershell"
8:Type .\adb connect 192.168.0.5:5555 (use your own IP, not the ex)
9: Once connected type .\adb install facebook.apk (type in your own APK name, not the ex)
10: Wait for success, and app should be on watch
FYI some computers do not need the .\adb, just type adb
Option 2 (Slower)
* Prerequisites:
1: Computer
2: Cord to connect your phone.
Tested and works with Lineage OS Android Nougat 7.1 and Android wear 2.7 on Verizon Wear24 watch
All the credit goes to the youtuber that created the video, I'm just passing along the information.
https://www.youtube.com/watch?v=1g77uIGxvcs
http://www.mediafire.com/file/8936ojtv5axl73g/Android+Wear+Sideloader.zip
https://www.apkmirror.com/
Follow the steps listed in the Start.bat, do not run as Admin.
The APK must be loaded into the main folder, not the app folder.
Currently installed Facebook Lite, tested and works.
Opera Mini opens but force closes after a few seconds.
You may need to open the start.bat twice if it doesnt load the localhost (watch) the first time.
Just a heads up the installation transfers APKS at 51 KB/s, slow! Takes about 2 minutes for a 5mb apk.
Can this be done without the need for an Android Phone? I use an odd couple (iPhone 7 Plus with a Ticwatch E). I have access to Android via a tablet only...
agonzalez1010 said:
Can this be done without the need for an Android Phone? I use an odd couple (iPhone 7 Plus with a Ticwatch E). I have access to Android via a tablet only...
Click to expand...
Click to collapse
The first option requires a computer and the watch only!
shawndak said:
I have been looking how to do this for a day now with no luck. All the other applications seem to be for early Android wear versions less than 2.0 or Android 5.1.1 or less.
Option 1 (Faster)
1: Install ADB on your computer. https://www.xda-developers.com/install-adb-windows-macos-linux/
2: Enable Developer Options on your wear watch. https://forum.xda-developers.com/android-wear/development/guide-how-to-connect-adb-wifi-t3368602
3: Make sure bluetooth is off, wifi on and connected to same network as laptop.
4: Turn on debug over wifi option in developer options and wait for it to show your IP.
5: On windows, make sure platform tools are on the main drive. Ex (C
6: Copy your APK files into the same folder.
7: Inside the folder, press shift and right click. Then press "open with CMD here or powershell"
8:Type .\adb connect 192.168.0.5:5555 (use your own IP, not the ex)
9: Once connected type .\adb install facebook.apk (type in your own APK name, not the ex)
10: Wait for success, and app should be on watch
FYI some computers do not need the .\adb, just type adb
Option 2 (Slower)
* Prerequisites:
1: Computer
2: Cord to connect your phone.
Tested and works with Lineage OS Android Nougat 7.1 and Android wear 2.7 on Verizon Wear24 watch
All the credit goes to the youtuber that created the video, I'm just passing along the information.
https://www.youtube.com/watch?v=1g77uIGxvcs
http://www.mediafire.com/file/8936ojtv5axl73g/Android+Wear+Sideloader.zip
https://www.apkmirror.com/
Follow the steps listed in the Start.bat, do not run as Admin.
The APK must be loaded into the main folder, not the app folder.
Currently installed Facebook Lite, tested and works.
Opera Mini opens but force closes after a few seconds.
Click to expand...
Click to collapse
Thx for explanation. Any clue how i can also sideload the setting of an app to wear?
nagelo said:
Thx for explanation. Any clue how i can also sideload the setting of an app to wear?
Click to expand...
Click to collapse
No clue!
shawndak said:
You may need to open the start.bat twice if it doesnt load the localhost (watch) the first time.
Just a heads up the installation transfers APKS at 51 KB/s, slow! Takes about 2 minutes for a 5mb apk.
Click to expand...
Click to collapse
really late, but mine transferred at 555KB/s, (so close to being 6s) but yeah, pretty slow
I came across this error when following the first option. Any advice?
error: more than one device/emulator
adb: error: failed to get feature set: more than one device/emulator
- waiting for device -
error: more than one device/emulator
Another method
Hey first of all I want to say thanks for your tutorial.
I found another method for sideloading your apps to your Wear OS watch.
It's my preferred method because you need no PC.
There is this apps called Apps2Fire it's made for sideloading apps to an Amazon fire TV, but if you enter the IP address of your watch and enable ADB over Wi-Fi you can sideload all apps installed on your phone or any .apk stored at your phone directly to your watch.
For me, this is the easiest way for sideloading, and it would be cool if you can add it to your tutorial.
Tutorial:
1. Install Apps2Fire on your Phone
2. Open the app and go to Setup,
3. Enter the IP of your watch/ or tap on network and let it search for your watch
4. Tap in the upper right corner on the Upload Symbol and chose your .apk and tap on it and then on install.
5. Enjoy
How can I extract an application installed on the watch?
hotplex said:
I came across this error when following the first option. Any advice?
error: more than one device/emulator
adb: error: failed to get feature set: more than one device/emulator
- waiting for device -
error: more than one device/emulator
Click to expand...
Click to collapse
I had the same problem - it was because my AVD was still running from Android Studio. Once I closed that and ran the command again, it worked fine.
would thet be wrong adb. most don't set a path in variables on Windows they will have issues for Windows would this be better fastboot too thanks great work glad people are working on wear
---------- Post added at 02:12 PM ---------- Previous post was at 02:11 PM ----------
would thet be wrong adb. most don't set a path in variables on Windows they will have issues for Windows would this be better fastboot too thanks great work glad people are working on wear https://forum.xda-developers.com/showthread.php?t=2588979
please help! error
i tried sideloading with adb. i got the watch to connect but when i tried to install the apk i got this error:
adb: failed to install gv.apk: Failure [INSTALL_FAILED_NO_MATCHING_ABIS: Failed to extract native libraries, res=-113]
what am i doing wrong? please help!!! thank you
lindsay
shawndak said:
I have been looking how to do this for a day now with no luck. All the other applications seem to be for early Android wear versions less than 2.0 or Android 5.1.1 or less.
Option 1 (Faster)
1: Install ADB on your computer. https://www.xda-developers.com/install-adb-windows-macos-linux/
2: Enable Developer Options on your wear watch. https://forum.xda-developers.com/android-wear/development/guide-how-to-connect-adb-wifi-t3368602
3: Make sure bluetooth is off, wifi on and connected to same network as laptop.
4: Turn on debug over wifi option in developer options and wait for it to show your IP.
5: On windows, make sure platform tools are on the main drive. Ex (C
6: Copy your APK files into the same folder.
7: Inside the folder, press shift and right click. Then press "open with CMD here or powershell"
8:Type .\adb connect 192.168.0.5:5555 (use your own IP, not the ex)
9: Once connected type .\adb install facebook.apk (type in your own APK name, not the ex)
10: Wait for success, and app should be on watch
FYI some computers do not need the .\adb, just type adb
Option 2 (Slower)
* Prerequisites:
1: Computer
2: Cord to connect your phone.
Tested and works with Lineage OS Android Nougat 7.1 and Android wear 2.7 on Verizon Wear24 watch
All the credit goes to the youtuber that created the video, I'm just passing along the information.
https://www.youtube.com/watch?v=1g77uIGxvcs
http://www.mediafire.com/file/8936ojtv5axl73g/Android+Wear+Sideloader.zip
https://www.apkmirror.com/
Follow the steps listed in the Start.bat, do not run as Admin.
The APK must be loaded into the main folder, not the app folder.
Currently installed Facebook Lite, tested and works.
Opera Mini opens but force closes after a few seconds.
Click to expand...
Click to collapse
lindser112 said:
i tried sideloading with adb. i got the watch to connect but when i tried to install the apk i got this error:
adb: failed to install gv.apk: Failure [INSTALL_FAILED_NO_MATCHING_ABIS: Failed to extract native libraries, res=-113]
what am i doing wrong? please help!!! thank you
lindsay
Click to expand...
Click to collapse
Looks like you're trying to load an app with the wrong CPU architecture! Try to download a different arch cpu type of that app.
My Fossil Carlyle doesn't showing Wifi debugging in the dev. options. Any way to get sideload without cable working?
schuetzi13 said:
Hey first of all I want to say thanks for your tutorial.
I found another method for sideloading your apps to your Wear OS watch.
It's my preferred method because you need no PC.
There is this apps called Apps2Fire it's made for sideloading apps to an Amazon fire TV, but if you enter the IP address of your watch and enable ADB over Wi-Fi you can sideload all apps installed on your phone or any .apk stored at your phone directly to your watch.
For me, this is the easiest way for sideloading, and it would be cool if you can add it to your tutorial.
Tutorial:
1. Install Apps2Fire on your Phone
2. Open the app and go to Setup,
3. Enter the IP of your watch/ or tap on network and let it search for your watch
4. Tap in the upper right corner on the Upload Symbol and chose your .apk and tap on it and then on install.
5. Enjoy
Click to expand...
Click to collapse
awesome thanks, this seems to work...it says connected on the apps2fire app...i haven't tried to upload apk yet to watch..i have fossil gen4 sport..now to find some good apks to sideload lol
I've followed everything but when i do /adb devices it doesn't show anything and when i do /adb connect with the wifi ip address... it says unable to connect to the ip address i wrote
Thanks heaps. The first method worked for me on TicWatch Pro 3 Woohooo...
Does anyone know a tutorial on how to make an apk compatible to install on a watch please?
Smeeksmiley said:
I've followed everything but when i do /adb devices it doesn't show anything and when i do /adb connect with the wifi ip address... it says unable to connect to the ip address i wrote
Click to expand...
Click to collapse
no one has explained it properly on XDA it kind of sucks for newbies tbh
Step1: go to settings - system - about - tap build # 7 times
Step2: go to settings - developer settings - adb debug -adb wifi debug on
step3: download apk on computer
step4: go to the folder with the APK in it "Shift + right click" open powershell
step5: go to the wifi on your watch click on it - get the ip address (should be 192.168.x.xx)
Step6: powershell type: "adb connect 192.168.x.xx:5555" (your watch ip address + the port 5555)
step7: powershell type: "adb -e install appname.apk" (type in the app name where i wrote the app name)
Example:
C:\Users\Bob\Downloads> adb -e install Spotify.apk
Has anyone been able to get a gcam port working on their WearOS device?
Hi,
I just bought a mi 4K stick. Android 11
Everything works like a charm except sideloading apps.
Enabled Unknown Sources.
Disabled Google protect.
Granted permission for Downloader and File commander.
Downloader: whenever i click on the file and open the apk to install, it will show the progress bar for 2 seconds and then close. no error.
File Commander: Whenever i try to install the file, progress bar showing staging app and then nothing happens.
I tried the same APK on my TCL Smart TV and it worked like a charm. Android 9
Any hint would be appreciated.
Thanks,
Same problem, any solution?
Same here
Can't install any outside apps
Also mx players doesn't read all files on my external drive
3la2Saber said:
doesn't read all files on my external drive
Click to expand...
Click to collapse
What file systems does the xiaomi stick 4k support via usb? Is it more than just fat32?
Are ntfs and exfat supported?
3la2Saber said:
Can't install any outside apps
Click to expand...
Click to collapse
Others have mentioned the same issue. You could try a third party installer app like "downloader".
Or, using adb install or other system level tools.
Do you find solution?
Hi,
did anyone find a solution for this problem ?
a Quick update.... I managed to install apps using ADB Command.
first, enabled developed mode and usb debugging.
enabled unknown source
run adb command from windows laptop and install the apk ( adb install apkname)
https://sites.google.com/site/tweakradje/devices/xiaomi-mi-tv-stick?authuser=0 was very helpful....
i also got them installed thru adb , but when restart all of these apps will go away, its really annoying
to install the apps , follow these below steps :
from the CMD
adb.exe connect "IP address of your android device"
cd " location for your apk apps "
adb install " appname "
done
please if anyone find a solution to make these apps stands , share it with us
got it done successfully
now it runs as it should be
i only did a couple factory reset , then it works
most important , when download the downloader app, make sure you provide full accesses and grant permission for unknown app before open the downloader app
and the same for any other apps , download any desire app from downloader then install it , provide permissions then use the app
that's it
thansk
zahi_k said:
Disabled Google protect.
Click to expand...
Click to collapse
No need for this.
Dear Assad. Can you please have a step by step in how you did it. It would be appreciated
Hello All. I was able to side load some of the apps using adb. I was not successful to install everything but I did not try to see why. I was able to load the apps that I needed and that is why I did not go further. Also, experts might have an idea why I was not able to do it. nonetheless, here is what I did
1- Download the ADB file and rename it to .CMD __TV_STICK_MODS.CMD__
2- Once downloaded and renamed to say"tv_stick_mods.cmd" (just an example), double click the file to run it.
3- It will prompt you to download the adb.exe and it will take you to the site where you can download it from. You will have to download this file "platform-tools_r34.0.1-windows"
4- Once downloaded, you need to extract the the file in a folder where you know the location and add to the same folder the "tv_stick_mods.cmd" (all have to be in the same folder)
5-Download the apps that you want to side load (no need to put them in the same folder)
6- Go to your Mi box stick and enable developers option and enable USB debugging
7- Also from your Mi box go to the setting of your network connection and obtain the IP address for your Mibox (should be something like 192.167.XX.XX)
8- Run "tv_stick_mods.cmd" again and it will prompt you to enter the IP address for the Mi stick. Enter the IP address that you have obtained in #7 and it will try to connect and it will show you a message on the TV to allow PC to connect (Make sure that you are on the same network as the MI stick)
9- Once permission is granted, then go back to PC/ Laptop and you will see a message that says "this does not seem to be a mi-stick do you want to continue"
10- hit yes and it will take you to another menu where you can explore all the options that you can do with the Mi stick from your laptop.
11- for installing apps, choose option 8 (copy / Install/uninstall)
12- In the next menu chose install and it will prompt you to choose the app that you want to install
13- Go to the location where you downloaded the app and choose the app that you want to install
14- It will prompt you if you want to install that app or not. Hit yes and let it install (should not take more than 10 Secs)
15- once done, it will show success and hit any key. Once this is done, go back and see if your app has been installed.
Hope this procedure helps you guy like it did to me and please if there is any flow in what I did please correct me
sambosat said:
Hello All. I was able to side load some of the apps using adb. I was not successful to install everything but I did not try to see why. I was able to load the apps that I needed and that is why I did not go further. Also, experts might have an idea why I was not able to do it. nonetheless, here is what I did
1- Download the ADB file and rename it to .CMD __TV_STICK_MODS.CMD__
2- Once downloaded and renamed to say"tv_stick_mods.cmd" (just an example), double click the file to run it.
3- It will prompt you to download the adb.exe and it will take you to the site where you can download it from. You will have to download this file "platform-tools_r34.0.1-windows"
4- Once downloaded, you need to extract the the file in a folder where you know the location and add to the same folder the "tv_stick_mods.cmd" (all have to be in the same folder)
5-Download the apps that you want to side load (no need to put them in the same folder)
6- Go to your Mi box stick and enable developers option and enable USB debugging
7- Also from your Mi box go to the setting of your network connection and obtain the IP address for your Mibox (should be something like 192.167.XX.XX)
8- Run "tv_stick_mods.cmd" again and it will prompt you to enter the IP address for the Mi stick. Enter the IP address that you have obtained in #7 and it will try to connect and it will show you a message on the TV to allow PC to connect (Make sure that you are on the same network as the MI stick)
9- Once permission is granted, then go back to PC/ Laptop and you will see a message that says "this does not seem to be a mi-stick do you want to continue"
10- hit yes and it will take you to another menu where you can explore all the options that you can do with the Mi stick from your laptop.
11- for installing apps, choose option 8 (copy / Install/uninstall)
12- In the next menu chose install and it will prompt you to choose the app that you want to install
13- Go to the location where you downloaded the app and choose the app that you want to install
14- It will prompt you if you want to install that app or not. Hit yes and let it install (should not take more than 10 Secs)
15- once done, it will show success and hit any key. Once this is done, go back and see if your app has been installed.
Hope this procedure helps you guy like it did to me and please if there is any flow in what I did please correct me
Click to expand...
Click to collapse
hello dear , I tried it and its working i can install the application i need now thank you. but i am still facing one more issue that after restart different apps removed automatically. i disabled google protect from google play store. even some apps installed from google play got deleted. do you know what is the problem and how to solve it? thanks in advance.
Hello;
Well... for the issue of deleted Appz I'm still looking into a solution for this as I'm also facing this issue and till now I was unable to resolve it. Also I have another issue that not all the Appz can be installed. If anyone has an Idea it would be good to share
sambosat said:
Hello;
Well... for the issue of deleted Appz I'm still looking into a solution for this as I'm also facing this issue and till now I was unable to resolve it. Also I have another issue that not all the Appz can be installed. If anyone has an Idea it would be good to share
Click to expand...
Click to collapse
hello, also for me still searching for solution for auto deleting apps after restart. for some apps not being installed try to search for another app version that match the stick from https://www.apkmirror.com/ . i am choosing the version compatible with armeabi-v7a and its working fine with me for the apps I need.
Good point I will check it out also I totally forgot about compatibility issue. Thank you for the update