Hello
I have a poco f1 and I tried to flash from a week ago and here are the problems I faced.
1) I have shifted from latest miui to pixel experience plus from last week and the first problem I faced was when I tried to flash disable force encryption my phone didn't boot in the room it would get stuck on the google logo I did flash dfe while after flashing twrp to permanently install it but my device was still encrypted. Because of this, I have to remove all passwords before flashing anything.
2) After I tried PEP Rom I wanted to shift to evolution x and I downloaded the last built 4.7 android 10 official for poco f1 and flashed it in twrp and it was installed successfully but when I click on reboot system twrp showed no os installed. No one faced this problem but idk y I did.
3) My twrp doesn't show any portion to wipe vendor so I planned to shift on orange fox today and saw that as I install orange fox it would get stuck on orange fox logo and doesn't boot up.
Finally, I read this on some site
This device uses dm-verity!
This means that swiping to allow system modifications will prevent you from being able to boot if you are using the stock kernel. In order to bypass dm-verity's boot prevention, you will have to install a kernel that has dm-verity disabled in the fstab.
I never installed any custom kernel before installing PEP Rom on my device and people say that we have to flash lazy flaser what is this.
plz do explain every think in detail as i tried asking many YouTubers non of them responded.
Thank You
When all fails. The only solution is to flash miui stock rom.
Related
Hey guys, I'm trying to install LineageOS GSI (arm64 A/B) on my Mi A3 and seem to be having some trouble getting the GSI to actually boot successfully.
I have already done my research both on XDA and elsewhere online, yet most threads focused on the device seem to be of little to no use and/or filled with spam replies that only serve to confuse people looking into this.
A quick note regarding the aforementioned threads:
I don't mean to sound disrespectful to the community, but honestly, bashing somebody over why they'd rather install anything but your own fav piece of software is completely ridiculous.
Without further ado, my case goes as follows:
I'm starting fresh with the latest stock firmware, after having unlocked my bootloader ofc (critical too), I've successfully installed TWRP, wiped, installed the system image and yet after rebooting I'm just greeted with good ol' Fastboot, at which point I either directly flash the stock firmware and try again or wipe my data and whatnot (through TWRP, if reinstalled) and still end up with Fastboot.
Therefore, I have to ask you guys:
Has anyone previously successfully installed any GSI rom on the Mi A3?
Did you flash the system img while on stock firmware or a previously flashed custom rom (ie Pixel Experience)?
Is there any need for any special patch similar to the ones used for MIUI based Xiaomi phones?
Did you face any other issues while trying to flash a GSI?
My intention is to eventually install microG using Nanodroid.
Thanks for asking. I was trying to flash Havoc, crDroid and MSM-Xtended Android 10 GSIs but I can't boot the phone.
I have flashed lots of GSIs in the past, but this is really intriguing me, I can't boot on Mi A3. Wiping or formatting data does not solve, neither Permissiver or Disable Dm-verity zips did the job... :crying:
I successfully bootet the LineageOS GSI yesterday. I was not coming from stock though. I think this process should work assuming you already bootet to TWRP:
1. flash the GSI image to system partition using TWRP
2. flash the TWRP installer to keep your recovery
3. (not sure if needed) flash no fde patch
4. optional: flash some other stuff like Magisk and gapps
5. wipe data and dalvik
I think it rebooted to recovery on my first try but worked after flashing everything again. I probably made some mistake on my first attempt but just make sure to try again before giving up.
Also there's this tutorial but it's not at all what I did to get it working:
https://forum.xda-developers.com/mi-a3/how-to/tutorial-flash-custom-rom-mi-a3-t3977169
Hey guys i have an issue, i was running Pixel Experience 10 but on MIUI 10, i couldn't update the last one so i thought to get back to stock rom, update to miui 11 and then get back to my Pixel rom. I DID A BIG MISTAKE. I installed the Miui 11 Update through TWRP without restoring the stock miui 10 rom. It worked but i had lost my Pixel rom ( i have a backup), ok then i installed TWRP at the MIUI 11 because recovery mode got me at Xiaomi Recovery for some reason. Inside the TWRP i flashed Disabled forc Encryption, but it didnt flash the Magisk, i reboot to system and after 100 bootloops i tried to go back to recovery mode, it boot at TWRP but since then, the TOUCHSCREEN DOESN'T WORK.. I used xiaomi mi flash tool to return to stock rom, it did, locked the bootloader etc...the touchscreen still doesn't work though... I can connect a mouse with OTG Type-C and i can do anything you tell me in order to fix it.. i have already update to MIUI 11, unlock the bootloader, installed TWRP and have Root. Has anyone any idea or a solution to try? Thanks everyone in advance.
diamoc said:
Hey guys i have an issue, i was running Pixel Experience 10 but on MIUI 10, i couldn't update the last one so i thought to get back to stock rom, update to miui 11 and then get back to my Pixel rom. I DID A BIG MISTAKE. I installed the Miui 11 Update through TWRP without restoring the stock miui 10 rom. It worked but i had lost my Pixel rom ( i have a backup), ok then i installed TWRP at the MIUI 11 because recovery mode got me at Xiaomi Recovery for some reason. Inside the TWRP i flashed Disabled forc Encryption, but it didnt flash the Magisk, i reboot to system and after 100 bootloops i tried to go back to recovery mode, it boot at TWRP but since then, the TOUCHSCREEN DOESN'T WORK.. I used xiaomi mi flash tool to return to stock rom, it did, locked the bootloader etc...the touchscreen still doesn't work though... I can connect a mouse with OTG Type-C and i can do anything you tell me in order to fix it.. i have already update to MIUI 11, unlock the bootloader, installed TWRP and have Root. Has anyone any idea or a solution to try? Thanks everyone in advance.
Click to expand...
Click to collapse
try flashing via fasboot "V10.2.3.0 - Global" - https://c.mi.com/thread-2549712-1-0.html . works for me .............. thanks to zyhpex https://forum.xda-developers.com/poco-f1/help/touchscreen-stopped-twrp-t3979087
Worked for me, thanks!
Hi,
Firstly, sorry for the lack of references in my post, as this is my first one, I'm not allowed to add URLs.
I recently purchased a Blackview BV9500 Plus and I have been trying to flash TWRP, I wanted to try different custom ROMs since the stock ROM for BV9500 PLus is apparently no longer updated (info comes from a Blackview forum).
The TWRP version that I'm trying to flash is 3.3.1 for BV9500 Plus (unofficial).
I have tried different ways, using fastboot flash recovery, using SPFlashTool and flash directly the recovery file, and it looks like the flashing succeeded but I have never been able to boot into TWRP. When I turn on the phone pression the Volume UP key, I see the Blackview logo (which sometimes appears color inverted black <-> white) and then nothing happens, it goes back to rebooting until I let go of the Volum UP key, then it starts normally. I even tried with a different TWRP version (3.2.3 for Android 9.0 Pie MT6771, unofficial) with same results ...
I unlocked the bootloader (ticked it in the phone settings) and did a fastboot flashing unlock, I tried rooted (with last version of Magisk with which I patched the boot.img and flashed), not rooted ... with no luck ... (I even lost my IMEI after a complete format with SPFlash along with the googlekey, fortunately I was able to reflash everything thanks to BV support :laugh::victory
Many thanks in advance for your help, I have been trying to figure this all out for a few days now ...
Best regards.
Hello friends,(Don't mind my English)
I am trying to install PE Rom in my redmi note 10 (mojito) for 2 days.
I tried from adb, I successfully installed recovery.img of PE rom
But when i tried to open the recovery in the phone. It got stuck on bootloop.
Although I've fixed the bootloop, but it always gets stuck on bootloop on this step. I tried many times.
(I've followed all instructions carefully. My bootloader is unlocked and USB debugging is on)
I've also tried TWRP, But facing the same problem with that too.
It always geta stuck on bootloop. I've literally tried it 7-8 times.
Someone Please help!!!
use april recovery, may recovery is broken.
However i recommand you to use PixelPlusUI or PixelOS instead of PE cuz they are more optimized
- flash fastboot miui rom
- flash ofox beta
- format data
- flash pe rom
- done
Have unlocked bootloader and installed TWRP 3.7.0_9-0
Have tried to flash Pixel Experience 11, Pixel Experience 12 and Arrow v11
All of them just hang at first boot, with the animated logo. I left each for over half an hour.
Have wiped everything I can think to wipe.
Is there something obvious I'm failing to do ? Lineage 18.1-20210620 was on the device before I started.
Edit: I can re-install Lineage 18.1 but nothing newer. Do I need to do something to enable newer ROM flashes?
HarpingOn said:
Have unlocked bootloader and installed TWRP 3.7.0_9-0
Have tried to flash Pixel Experience 11, Pixel Experience 12 and Arrow v11
All of them just hang at first boot, with the animated logo. I left each for over half an hour.
Have wiped everything I can think to wipe.
Is there something obvious I'm failing to do ? Lineage 18.1-20210620 was on the device before I started.
Edit: I can re-install Lineage 18.1 but nothing newer. Do I need to do something to enable newer ROM flashes?
Click to expand...
Click to collapse
To check:
TWRP/O.F
wipe/format data type yes
reboot Twrp/O.F
Flash latest firmware (if necessary).
Flash the rom as instructed by the OP.
HarpingOn said:
Have unlocked bootloader and installed TWRP 3.7.0_9-0
Have tried to flash Pixel Experience 11, Pixel Experience 12 and Arrow v11
All of them just hang at first boot, with the animated logo. I left each for over half an hour.
Have wiped everything I can think to wipe.
Is there something obvious I'm failing to do ? Lineage 18.1-20210620 was on the device before I started.
Edit: I can re-install Lineage 18.1 but nothing newer. Do I need to do something to enable newer ROM flashes?
Click to expand...
Click to collapse
Use TWRP by REIGNZ based on A12 system_ext. You can find it my POCO F1 Ultimate Collection & Guides along with Guides for clean installation.
P.S: Near the link of twrp by reign you will also find a link for the current bugs/issues and workaround for them.