hi
Above all, I think that is great interest this forum and this site, congratulations
then my problem is that I want to know how to activate
my GPS chip in my HTC TYTN 1
I have been doing research and I found interesting but I'm afraid the same time and also not well understood.
that there is an easy way pls ?
and also how pls !
thank you
and sorry for my bad english: D
Can't be done.... NO receiver for GPS signal.
You can buy a bluetooth receiver however and use a standalone GPS app. I use Tomtom with a 54 channel receiver I bought off ebay a while back. Works fantastically.
Cheers...
thx for answer
can you show me pls where can I find this bluetooth receiver ! a site web !!
ultramag69 said:
54 channel receiver I bought off ebay
Click to expand...
Click to collapse
As above.....
ok thx very much for information ultramag69
Just got a P1010 to do the hardware mod for a friend, and noticed the board lay out is different to the P1000 I think my friend thought the mod was the same the P1000.
So my question is do I need to do the same mod as the P1000 if so does anyone have the details for the P1010 ?
Thanks in advance for any help .....
I just solder anything using my OKI station .25years of lead fumes... my brain is shrinking..
DisQreet said:
Just got a P1010 to do the hardware mod for a friend, and noticed the board lay out is different to the P1000 I think my friend thought the mod was the same the P1000.
So my question is do I need to do the same mod as the P1000 if so does anyone have the details for the P1010 ?
Thanks in advance for any help .....
I just solder anything using my OKI station .25years of lead fumes... my brain is shrinking..
Click to expand...
Click to collapse
Must be you're in the wrong forum.
so i bought this projector and its pretty sweet. Projector with HDMI and USB and has android so i can use all the sports apps, like espn, tnt, abc, etc....welll....you have to load the .apk to install those apps as it wont work any other way. It seems Chinese and like an overseas android box, but my question is, can i update this to a better android version and workable version. I have not see any videos of an update and there is no reset button either so it would have to be USB. any guidance is greatly appreciated.
I found it on amazon, i cannot post the link in here, but a simple irulu projector search on there will take you there, or youtube videos. thank you very much for all your help.
bump
yo
I have the same projector irulu pro 20. 2600 lumines the white one. I've contacted them Alot through phone and email. They've sent me a link to what their saying is an update since I can't update out 4.4.2. The problem is I don't speak or read Chinese. Of you or anyone is interested I'll post it. Let me know
stappdaiel said:
I have the same projector irulu pro 20. 2600 lumines the white one. I've contacted them Alot through phone and email. They've sent me a link to what their saying is an update since I can't update out 4.4.2. The problem is I don't speak or read Chinese. Of you or anyone is interested I'll post it. Let me know
Click to expand...
Click to collapse
yes pleaaaaase i need it
iRulu Projector Update?
stappdaiel said:
I have the same projector irulu pro 20. 2600 lumines the white one. I've contacted them Alot through phone and email. They've sent me a link to what their saying is an update since I can't update out 4.4.2. The problem is I don't speak or read Chinese. Of you or anyone is interested I'll post it. Let me know
Click to expand...
Click to collapse
yes please!! I have been searching and searching and could not find an update. Please post.
Irulu 10 pro projector
avarnell said:
yes please!! I have been searching and searching and could not find an update. Please post.
Click to expand...
Click to collapse
HI I have been trying to look for a way to use my projector on kori but can't since my version is outdated do you still have that link to upgrade.? . Would help me a ton and would appreciated even more.
Hay solución ?
I ve discovered that the 7floor sound mod has been made to work on an RK3188 MTCD unit by @kumarai.
I ve searched all threads in this forum and it doesnt seem to be known amongst you MTCD guys (or even to have been mentioned), whereas over in the MTCB forums (the mod was developed for MTCB units) quite a few people have done it.
I thought it would be worth mentioning here.
What it does, basically is remove control of the sound processor from the MCU and give it to Android for a very worth while improvement in sound quality and more features.
It does require some soldering and there is a small difference in what has to be done to the software (see first pic) to get it to work on MTCD units. Cant say it will work on Sofia or PX5 units, but theres no reason to think it wouldnt or couldnt be made to work on them.
Here are some links :
@kumarai on youtube :
https://www.youtube.com/watch?v=KyDFyirit9I&feature=youtu.be
@7floor's original thread :
https://forum.xda-developers.com/an.../mtc-sound-controlling-bd37xxx-sound-t3234660
7floor's Xposed repo page (which now mentions MTCD units) :
http://repo.xposed.info/module/com.sevenfloor.mtcsound
Screenshots from 4pda.ru (links from there not allowed ot be posted on xda)
thats very cool,
however does it get rid of the constant hiss sounds, and the noise generated when mcu is processing.
regards
mmmalas said:
thats very cool,
however does it get rid of the constant hiss sounds, and the noise generated when mcu is processing.
regards
Click to expand...
Click to collapse
I ve got an MTCB/C unit and I never had those issues even with the MCU controlling the sound processor, so I dont know, if the sounds are caused by the MCU processing sound then maybe.
Software part?
Hello,
I'm very interested to perform this mod but I'm having couple of questions. The unit is now on my kitchen table and I have all the parts I need.
How does the software part go with MTCD unit, because we cannot install xposed framework?
For me This is the correct route(different from 7floor):
BD37 -26 SDA - R70(100ohm) - SDIN
BD37 - 25 SCL - R71(100ohm) - SCLK
I've read that older models have 1kohm resistance but I have 100ohm which should lower the interference "hiss/fuzz" sound. Sound is pretty good now but only bluetooth A2DP quality suck with iPhone and I'd hope this mod would improve it.
Kheissi said:
Hello,
I'm very interested to perform this mod but I'm having couple of questions. The unit is now on my kitchen table and I have all the parts I need.
How does the software part go with MTCD unit, because we cannot install xposed framework?
For me This is the correct route(different from 7floor):
BD37 -26 SDA - R70(100ohm) - SDIN
BD37 - 25 SCL - R71(100ohm) - SCLK
I've read that older models have 1kohm resistance but I have 100ohm which should lower the interference "hiss/fuzz" sound. Sound is pretty good now but only bluetooth A2DP quality suck with iPhone and I'd hope this mod would improve it.
Click to expand...
Click to collapse
There are 4 different versions of MTCD units, you need to state which one you have
edit : I can see from your other post that you ahve 5.1.1, you CAN install Xposed (but you need to be rooted).
Installed xposed framework
Oh yes, my unit is running 5.1.1 Hal9k android with KSP MCU, RK3188 and 1 GB of RAM.
I managed to install the xposed framework successfully! :victory: Now I'm installing MTC sound app and after I have checked it out I will solder the wires. :fingers-crossed:
Any tips how to get those little Rs out safely, because my tweezers won't get a good hold of those?
I have Dasaita V600 model with PX5 system. I was wondering does anybody know is it possible to do a 7floor mod on this unit?
Kheissi said:
Any tips how to get those little Rs out safely, because my tweezers won't get a good hold of those?
Click to expand...
Click to collapse
Heat.
hrvac100 said:
I have Dasaita V600 model with PX5 system. I was wondering does anybody know is it possible to do a 7floor mod on this unit?
Click to expand...
Click to collapse
Read the thread, it was mentioned just a few posts back.
typos1 said:
Read the thread, it was mentioned just a few posts back.
Click to expand...
Click to collapse
Well I have read and is only mentioned it could work but i was wondering has anybody try to open px5 unit and see are those components the same like in 3188 or similar. Because I would like to try to do that mod but would also like to know has anybody try it already on px5.
hrvac100 said:
Well I have read and is only mentioned it could work but i was wondering has anybody try to open px5 unit and see are those components the same like in 3188 or similar. Because I would like to try to do that mod but would also like to know has anybody try it already on px5.
Click to expand...
Click to collapse
When I say "the thread" I mean the original thread in the MTCB section as thats where all the info is . . .
typos1 said:
When I say "the thread" I mean the original thread in the MTCB section as thats where all the info is . . .
Click to expand...
Click to collapse
OK. Can you please be so kind and direct me on exact thread?
hrvac100 said:
OK. Can you please be so kind and direct me on exact thread?
Click to expand...
Click to collapse
Ah, you havent even bothered to read this thread either ?
If you had youd see that I d put a link to it in the first post.
typos1 said:
Ah, you havent even bothered to read this thread either ?
If you had youd see that I d put a link to it in the first post.
Click to expand...
Click to collapse
I saw that post, but honestly I didn't have time to read all posts. And majority of what I had chance to read was for px3 boards.
hrvac100 said:
I saw that post, but honestly I didn't have time to read all posts. And majority of what I had chance to read was for px3 boards.
Click to expand...
Click to collapse
Well youre supposed to read the thread before asking questions. All the info you need is in both threads.
marchnz said:
Heat.
Click to expand...
Click to collapse
C'mon man.
Anyway I was able to perform the mod successfully, at least it seems that way. But I have not had the change to install the unit in a my car yet so I really don't know if any sound is actually coming out...
My tip for soldering. Add little extra solder to the old components before removing. That way you have little more time to warm up both ends.
Had to install the MTC sound 2.0.5. app to avoid UI error.
Kheissi said:
C'mon man.
Anyway I was able to perform the mod successfully, at least it seems that way. But I have not had the change to install the unit in a my car yet so I really don't know if any sound is actually coming out...
My tip for soldering. Add little extra solder to the old components before removing. That way you have little more time to warm up both ends.
Had to install the MTC sound 2.0.5. app to avoid UI error.
Click to expand...
Click to collapse
That's great. Looks like you found the thread that discussed this very item/question in detail too.
typos1 said:
Well youre supposed to read the thread before asking questions. All the info you need is in both threads.
Click to expand...
Click to collapse
I managed to read all. Thanks
Does anyone have issues with Bluetooth? I tried to find more info from the original thread but didn’t find anything useful.
I have sound from radio and Spotify but Bluetooth calls won’t work. I can’t hear anything from the Bluetooth app and A2DP goes directly to calling screen.
How can I get the A2DP to work so I can stream from my phone?
Edit: No problems after all. Had to toggle gsm via android from the EQ and then calls work just fine. Then A2DP works only when using stock launcher. I find that weird.
Kheissi said:
Does anyone have issues with Bluetooth? I tried to find more info from the original thread but didn’t find anything useful.
I have sound from radio and Spotify but Bluetooth calls won’t work. I can’t hear anything from the Bluetooth app and A2DP goes directly to calling screen.
How can I get the A2DP to work so I can stream from my phone?
Edit: No problems after all. Had to toggle gsm via android from the EQ and then calls work just fine. Then A2DP works only when using stock launcher. I find that weird.
Click to expand...
Click to collapse
Strange, you could try BT app that includes the A2DP function (as opposed to one that has a separate app for it) and see if that makes a difference . . . although youd have to go through all the ROMs to try and find one. What processor have you got ?
Hi Guys,
Noticed while looking around that this specific Chinese Touchscreen Car Radio listed as a 7010B is quite a popular buy on eBay and Alibaba. You can find an example of a listing by searching 7010B Radio (Would post up a link but sill a newbie)
My question to you smart folk is, Is there a way to install a working version of android onto this device, while still keeping bluetooth functionality etc? I've purchased a unit to mess around with however I wouldn't know where to start looking.
Thanks for your help!
Knuff
I purchased one last week, and would also be interested.
TheKnuffel said:
Hi Guys,
Noticed while looking around that this specific Chinese Touchscreen Car Radio listed as a 7010B is quite a popular buy on eBay and Alibaba. You can find an example of a listing by searching 7010B Radio (Would post up a link but sill a newbie)
My question to you smart folk is, Is there a way to install a working version of android onto this device, while still keeping bluetooth functionality etc? I've purchased a unit to mess around with however I wouldn't know where to start looking.
Thanks for your help!
Knuff
Click to expand...
Click to collapse
TheKnuffel said:
Hi Guys,
Noticed while looking around that this specific Chinese Touchscreen Car Radio listed as a 7010B is quite a popular buy on eBay and Alibaba. You can find an example of a listing by searching 7010B Radio (Would post up a link but sill a newbie)
My question to you smart folk is, Is there a way to install a working version of android onto this device, while still keeping bluetooth functionality etc? I've purchased a unit to mess around with however I wouldn't know where to start looking.
Thanks for your help!
Knuff
Click to expand...
Click to collapse
Hi Guys,
Have you got any updates about firmware upgrades about this radio? I bought this model last month, most of the features work well for me, but i really wanted to change the background and bootlogo for my car radio and I couldn't find the option to do so. Please update me if ever you guys found a new firmware.
Thanks and cheers!
It would be great if we could at least install some APK's.
I'd like to install Torque Pro for guages. That would make a LOT of sense.
Hey i tried upgrading my radio and it gave me a blank screen after doing so. My question is, does the 7010b, SWM S7 AND THE SWM 88802 use the same firmware?