Hi guys, came from iphone 5 and before i had galaxy S3 and now galaxy S6 international. Rooted my sm-920f using pingpong. Everything was smooth and went as expected.
SuperSU seems to be working properly. I can access system files copy paste and edit them. CPU controlling apps seems to be working normally. When i set the min and max for each core it works accordingly for the 1500 mhz and the 2100 mhz cores. Yet i cannot find values in memory when trying to edit games' values. Yes i can edit a memory location but i cannot find my values. No matter what i use. Gamegardian seh or cheat engine. I cannot find games data im looking for to modify. I always start getting results but they get reduces to zero. Im useing cheat engine on pc and gamegardian and seh on other smart phones for years. So its not that i dont know how to search. Even the unknown initial with changed and unchanged get to zero before im even close to get a short list of memory locations. What i know from my experience with S3 this is not a full root. Because once i had this with S3 and i had to use another rooting program back then to fix it. The thing is i dont want to trigger the knox counter. So any chance that someone knows a fix for this
Hey there,
i have to make an android application which counts your pushups, where the phone is lying on the back of you. It has to measure these pushups by some sensor, i was told to use the acceleration sensor, but the value variates very much, so i am looking for an algorithm which "erases" these in the app or find another ability to measure it. So has anybody an idea or a good algorithm for me which i am allowed to use?
It will be just for something a bit smaller like a seminar work (a very very very small doctor work)
Anybody?
I want report a bug, that several users have already confirmed with CN and US Rom and Amazfit Watch app from Mi Store and Play Store.
If the watch is set to 4 data fields for activities, the sport item order can be rearranged in the Amazfit Watch app, and the 4 fields will be shown correctly during exercise.
But if however the watch is set to 6 data fields, it ignores the sport item order from the app and shows always the same set. This is especially annoying as we can't see e.g. the average pace during a trail run.
Is there a correction with another rom?pacefield, US, CN???
Thanks
I have the same issue. I change the order of the fields in the app but they don't change on the watch. (( What should I try?
No solution yet for 6 fields. If you need a custom set, you have to switch to 4 fields only.
It doesn't even work with 4 fields. How do you make the change? Do I need to start an activity first?
Of course, how else do you want to see that it works?
If you change the order in the Amazfit app and you don't start an activity on the watch, you wont see anything on the watch. Strange question or I misunderstood you.
I think you misunderstood me.
I mean does it matter what's the consequence of the process? Does it matter if:
1) First I arrange the fields in the app and then start the activity, or
2) I must start an activity and then change the order in the app while the activity is on, or
3) another option?
So far it's not working and I thought there could be another proper way to do it.
My last tests are from the time of the first post. So, long time not checked. I always use 6 fields and can live with the default order.
But it should be logical that only made settings in the app can be used in an activity. Changes after a finished activity has no effect to the already done things. The sport item order screen is only visible while an active workout.
Hi there,
i'm trying to build a companion app similar to watchdroid with wich i can send data to the watch and display them on a widget/springboard.
In my case i wan't to have my blood glucose level on my watch as i was used to with my android wear watch.
I have a simply app made with taske wich can read out a json from my nightscout site. This sadly work only via wifi.
Main problem is the bluetooth comunication. i've tried so many simply bluetooth apps and librarys via sideload. I can't even tell how many. Non of them worked out. Only some worked in watch to phone direction but not the other - desired - way. In almost every case, my phone could'nt even find the watch.
But since watch droid got it working, i know there is a way.
There is another way to get data to the watch: the notification system. Since i also could'nt get the notification listener to work on the watch, it is also not a starting point for me.
Last chance i see is automizing watchdroid and sending a file at a regulary scedule and reading this from the widget.
For the moment i just use Notify and fitness cause the Phone notification with my glucose level is persistent and the huami app ignores persistent notifications.
But get a new notification with my glucose level every 5 Minutes. On the phone the notification gets just updated, on the watch i get a new one. Over the day the notification stack gets fuller and fuller...
I'm not talking about geting this into a watchface, thats the next step after the next hundreds of steps.
Any help and tipps are welcome.
When a notification is dismissed on the phone, it should dismiss on the watch.
If you have the source to this app, you could make it dismiss it's notification and send a new one.
Klaus3d said:
Hi there,
i'm trying to build a companion app similar to watchdroid with wich i can send data to the watch and display them on a widget/springboard.
In my case i wan't to have my blood glucose level on my watch as i was used to with my android wear watch.
I have a simply app made with taske wich can read out a json from my nightscout site. This sadly work only via wifi.
Main problem is the bluetooth comunication. i've tried so many simply bluetooth apps and librarys via sideload. I can't even tell how many. Non of them worked out. Only some worked in watch to phone direction but not the other - desired - way. In almost every case, my phone could'nt even find the watch.
But since watch droid got it working, i know there is a way.
There is another way to get data to the watch: the notification system. Since i also could'nt get the notification listener to work on the watch, it is also not a starting point for me.
Last chance i see is automizing watchdroid and sending a file at a regulary scedule and reading this from the widget.
For the moment i just use Notify and fitness cause the Phone notification with my glucose level is persistent and the huami app ignores persistent notifications.
But get a new notification with my glucose level every 5 Minutes. On the phone the notification gets just updated, on the watch i get a new one. Over the day the notification stack gets fuller and fuller...
I'm not talking about geting this into a watchface, thats the next step after the next hundreds of steps.
Any help and tipps are welcome.
Click to expand...
Click to collapse
Hello,
what application do you use to get a notification every 5 minutes ??? you use a FreeStyle Free blood glucose sensor ??? I will be very happy to read you to know if you succeeded !!!
astrarico said:
Hello,
what application do you use to get a notification every 5 minutes ??? you use a FreeStyle Free blood glucose sensor ??? I will be very happy to read you to know if you succeeded !!!
Click to expand...
Click to collapse
Yes, it's freestyle libre with ambrosia blucon nightrider for nfc readout and transmission every 5 min. The app i use is xdrip+.
The notification is persistent to keep the data collector service running, to show the value on the notificatiin icon even on the aod of samsungs.
Klaus3d said:
Yes, it's freestyle libre with ambrosia blucon nightrider for nfc readout and transmission every 5 min. The app i use is xdrip+.
The notification is persistent to keep the data collector service running, to show the value on the notificatiin icon even on the aod of samsungs.
Click to expand...
Click to collapse
ah yes anyway, the price of "ambrosia blucon nightrider" as we say at home "it stings the eyes". before you give me the answer I was wondering how you did to get back the FreeStyle scan, so I understand. on the other hand to use the nightscout, it is a little the course of the fighter ... a lot of account to create. damage that the app glimp or other does not regroup suddenly!
It's currently my intention to build a framework for both phone and watch to allow apps to get data from the internet at some point in the next few months. I'm stuck with work to do at the moment so don't have any time to put towards projects (especially not big ones like that) but in the future - probably
I'd ideally also like to get Android Wear (not Wear OS, it's an old version) working too, to allow at least some companion apps to function (Sleep as Android, Keep etc.). I've got the framework working fine (which does improve app compatibility, but no communication still severely limits what they can do), but the two way Bluetooth connection throws an error that I cannot find any documentation about, so it's on hold for now until I have sufficient time to investigate properly
This would be awesome to have a framework like this. In my case i would'nt even need real internet access, due to the web service is localy provided by the xdrip app. But this would open so many things and possible options to code. Let me know if i could help. I'm also short in time but willing to help.
Getting Android wear working on the pace/stratos would also be great. I tried out sideloading the micro apk for wear of xdrip+ and it worked out better than expected. No crashes from the app and even the integrated watchfaces were selectable. Of course there were no data shown and no low power watchface.
Klaus3d said:
Getting Android wear working on the pace/stratos would also be great. I tried out sideloading the micro apk for wear of xdrip+ and it worked out better than expected. No crashes from the app and even the integrated watchfaces were selectable. Of course there were no data shown and no low power watchface.
Click to expand...
Click to collapse
It might actually be possible to build a newer version of Android, source code exists for the CPU and MIPS sources exist all the way up to Oreo, but again that would take time I don't have (and space for that matter)
Just wanted to let you know, that thanks to edotassi i have a working widget with my blood glucose values on my Stratos.
https://github.com/edotassi/AmazMod
https://github.com/edotassi/AmazModService
Now i'm fine tuning the widget and maybe also the nightscout parts of amazmod. But i'm still learning.
Klaus3d said:
Just wanted to let you know, that thanks to edotassi i have a working widget with my blood glucose values on my Stratos.
Now i'm fine tuning the widget and maybe also the nightscout parts of amazmod. But i'm still learning.
Click to expand...
Click to collapse
Hi, great news. Will this work on Amazfit BIP ?
Since the Bip does not rely on the AmazFit Watch app, i'd say no.
Can you show on the photo the indications of the xdrip on the watch? how it works.
Hi, i'm now trying to integrate quinnys library into xDrip, to make thinks easy and to allow 2 way communication.
Since xDrip is a really big and complex project + i'm a noop i'm having trouble with providing a switch in the menus and finding the right place to start the service from. Maybe someone can help me out again.
I am also really interest of amazfit bit. I saw now, xdrip have one section called "amazfit synk service" look like can connect with this kind of phones. Are there news to see the value on the display?
Tapiocapioca said:
I am also really interest of amazfit bit. I saw now, xdrip have one section called "amazfit synk service" look like can connect with this kind of phones. Are there news to see the value on the display?
Click to expand...
Click to collapse
None of this will work with the Bip, it's too limited
Is there any way to implement the clockscreen or widget from Glimp instead of XDrip on the Stratosphere. I'm getting better use from Glimp and MiaoMiao.
Klaus3d said:
Just wanted to let you know, that thanks to edotassi i have a working widget with my blood glucose values on my Stratos.
https://github.com/edotassi/AmazMod
https://github.com/edotassi/AmazModService
Now i'm fine tuning the widget and maybe also the nightscout parts of amazmod. But i'm still learning.
Click to expand...
Click to collapse
You should ask this the devs of glimp.
Hi all,
I don't know if this already exist or if it is even possible from the technical perspective. I've tried to find how to do it, mainly trying to install one of the already existings apps for android but only one is compatible with the amazfit pace architecture and the result in the watch screen is to poor.
The point is to have a new activity in the smartwatch that record laps by GPS position (fe some garmin models do this as well). You set at the beginning a start point and every time you cross that point the activity set a new laptime. It will be usefull for different sports as for example circuit cycling or motorsports like go karts/motorbikes.
Does someone know if this is possible or if already exist something similar?
Regards
Which device? Pace and Stratos have a function called Autolapse which I guess is what you are looking.
nhedgehog said:
Which device? Pace and Stratos have a function called Autolapse which I guess is what you are looking.
Click to expand...
Click to collapse
Hi nhedgehog, thanks for your reply.
I have an Amazfit Pace... I can see the autolap by distance or by time but can't find the autolap by gps start position or something called autolapse, where is that? Do you have any custom rom installed?
I don't think you can do it besides auto lap by distance or time, as most watches do. If you need anything else then probably you must export the GPX data on watch, transfer it to computer then use a third party service to edit the data.
I'll answer later, just switched the ROM, don't know if I got confused with all that new settings.
I'm on the Amazfit Pace Chines BETA 2.0.6.12 ROM. Here is a thread which lists the activity settings of some outdoor activities.
You are right I can't define a GPS position as Lap Starting. I have the possibility to define autolap by distance and set this alert on or off but not what you were looking for.
I also would be interested by this GPS lap function
WOS2 on Pace has an "Auto Lap" setting (with option of notification separate from the normal lap notification where you can set the lap length), most probably it exists on Stratos as well... Does it do what you need?