Related
Hello everyone
i get an oppo find x CPH1875
he start only to ColorOS Recovery or i can put him to edl mode.
i have QFIL.EXE flasher but when i download firmware i get *.ofp file...
i dont know how to convert and put good file to QFIL.EXE flasher ....
i see this film https://www.youtube.com/watch?v=bsT_kJatyRc but i dont have password to extract arrchive
somone can help me? :fingers-crossed:
ok, i get the password but program give me error "Sahara Fail Error"
maybe i have wrong firmware?
i have CPH1875 model, in the title of firmware is CPH1871
so, how i can flash firmware in *.ofp or *.ozip file?
Hello, i am here for repair of my broken huawei y5 2018 DRA-LX2 , where i lost my imei on my phone after taking back from repair of password removal.
i tried to reflash stock firmware using sp flash tool but it fails always. is shows an error message of "ERROR:STATUS_BROM_CMD_FAIL(0xC0060005)" i am unable to solve this problem please help me to reflash the stock rom on my device. i tried to read phones info and imei from fastboot it seems fine there i can able to read imei from fastboot but i can't flash from there. Please help me as soon as possible thank you. dont mind if my english is bad
:good:
Select Format all + Download in SP tool and flash my phone. Now my phone ............
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sâdíqûlllah said:
Select Format all + Download in SP tool and flash my phone. Now my phone ............
View attachment 5582549View attachment 5582551View attachment 5582553
Click to expand...
Click to collapse
Bruh say rip to your phone cause you done format all
It's never gonna boot now or by chance if it does you have already lose your IMEI so you can't able to use internet and service better go service centre and ask for a new phone to them xD
iamshubh69 said:
Bruh say rip to your phone cause you done format all
It's never gonna boot now or by chance if it does you have already lose your IMEI so you can't able to use internet and service better go service centre and ask for a new phone to them xD
Click to expand...
Click to collapse
bro is there any way to make it work
I have the same problem with my realme c21
also, I did format all
please say buy a new phone
Zartazor said:
bro is there any way to make it work
I have the same problem with my realme c21
also, I did format all
please say buy a new phone
Click to expand...
Click to collapse
Buy iPhone 13 pro max or samsung s22 plus
iamshubh69 said:
Buy iPhone 13 pro max or samsung s22 plus
Click to expand...
Click to collapse
Sorry my mistake
"please don't say buy a new phone"
By the way I have fixed it
Locked bootloader won't allow some partitions to be flashed
So I unlocked the bootloader and flashed again
And it worked
Zartazor said:
Sorry my mistake
"please don't say buy a new phone"
By the way I have fixed it
Locked bootloader won't allow some partitions to be flashed
So I unlocked the bootloader and flashed again
And it worked
Click to expand...
Click to collapse
please help me
Sâdíqûlllah said:
please help me
Click to expand...
Click to collapse
Use mtk client to unlock the bootloader
Then try to flash that again
Mtk client link:
GitHub - bkerler/mtkclient: MTK reverse engineering and flash tool
MTK reverse engineering and flash tool. Contribute to bkerler/mtkclient development by creating an account on GitHub.
github.com
Zartazor said:
Use mtk client to unlock the bootloader
Then try to flash that again
Mtk client link:
GitHub - bkerler/mtkclient: MTK reverse engineering and flash tool
MTK reverse engineering and flash tool. Contribute to bkerler/mtkclient development by creating an account on GitHub.
github.com
Click to expand...
Click to collapse
How to fix download not complete please press volume..............
Sâdíqûlllah said:
How to fix download not complete please press volume...........
Click to expand...
Click to collapse
To start this process you need to install python and mtk driver first
1. Download the zip file I gave you
2. Extract it
3. Force shutdown phone by pressing all three buttons together
4. Open the file you extracted in pc
5. Type cmd in address bar
6. Type python mtk_gui and hit enter
7. Hold volume up and down and plug it to your pc
8. When it shows all of your partitions, click on Flash Tools
9. click on Unlock bootloader
10. Now flash it again with SP Flash Tool
I am facing the same problem, I managed to flash everything (even super.img xD) through MTKClient + SP Flash Tool, but I still have the message with no signs of recovery/fastboot/booting past the logo.
Can you walk me through what you did please? starting with the exact firmware you used?
mouradsme said:
I am facing the same problem, I managed to flash everything (even super.img xD) through MTKClient + SP Flash Tool, but I still have the message with no signs of recovery/fastboot/booting past the logo.
Can you walk me through what you did please? starting with the exact firmware you used?
Click to expand...
Click to collapse
.
Sâdíqûlllah said:
Select Format all + Download in SP tool and flash my phone. Now my phone ............
View attachment 5582549View attachment 5582551View attachment 5582553
Click to expand...
Click to collapse
Help me, i also haved done this format all + downlod but now i cant flash anymore and right now my phone is nothing no vibration and etc just a blackscreen and i dont know what to do because i cant even flash and it gets errored whenever i flash it stucks at red bar DA 100% in spflashtool PLEASE SOMEONE HELP ME
My phone is Realme Narzo 20 (7iEU)
Please Help i will never buy Realme
Edit Scatter File
partition_name: oppo_custom
file_name: oppo_custom.img
is_download: true
Use Mtk Auth Bypass Tool > Disable Auth
Flash with SP Flash Tool without opporeserve2, oppo_custom, cdt_engineering, special_preload and my_custom
Use Mtk Client > mtk_gui > unlock bootloader
Use Mtk Auth Bypass Tool > Disable Auth
Flash all with SP Flash Tool
Download from Realme official site RMX2191_11_OTA_0330.ozip > copy to sdcard
Enter in recovery mode > install from storage > sdcard > RMX2191_11_OTA_0330.ozip > Wipe > Restart
x2s7 said:
My phone is Realme Narzo 20 (7iEU)
Please Help i will never buy Realme
Click to expand...
Click to collapse
Friend you were able to get your equipment I have a realme 7i Eu rmx2193 with the problem of download not completed I can't get it out of there can you help me you were able to get yours I can't even find the official ROMFriend you were able to get your equipment I have a realme 7i Eu rmx2193 with the problem of download not completed I can't get it out of there can you help me you were able to get yours I can't even find the official ROM
x2s7 said:
Edit Scatter File
partition_name: oppo_custom
file_name: oppo_custom.img
is_download: true
Use Mtk Auth Bypass Tool > Disable Auth
Flash with SP Flash Tool without opporeserve2, oppo_custom, cdt_engineering, special_preload and my_custom
Use Mtk Client > mtk_gui > unlock bootloader
Use Mtk Auth Bypass Tool > Disable Auth
Flash all with SP Flash Tool
Download from Realme official site RMX2191_11_OTA_0330.ozip > copy to sdcard
Enter in recovery mode > install from storage > sdcard > RMX2191_11_OTA_0330.ozip > Wipe > Restart
Click to expand...
Click to collapse
Friend you were able to get your equipment I have a realme 7i Eu rmx2193 with the problem of download not completed I can't get it out of there can you help me you were able to get yours I can't even find the official ROMFriend you were able to get your equipment I have a realme 7i Eu rmx2193 with the problem of download not completed I can't get it out of there can you help me you were able to get yours I can't even find the official ROM
Hello, someone help me, I have a realme 7i Eu rmx2193 with the problem of downloading not completed due to deleting everything with flashtool, I have tried flashing it but it still has the same problem and its stock rom appears for realme March 20 when someone searched for it, help me with thatHello, someone help me, I have a realme 7i Eu rmx2193 with the problem of downloading not completed due to deleting everything with flashtool, I have tried flashing it but it still has the same problem and its stock rom appears for realme March 20 when someone searched for it, help me with that
By the way don't waste your time to repair this google trash system.
google is a cyber weapon.
Better use Plasma Mobile or some arm emmc os
You have to extract oppo_custom.img from the ofp file
You can find ofp from google
FrankOlivers said:
Hello, someone help me, I have a realme 7i Eu rmx2193 with the problem of downloading not completed due to deleting everything with flashtool, I have tried flashing it but it still has the same problem and its stock rom appears for realme March 20 when someone searched for it, help me with thatHello, someone help me, I have a realme 7i Eu rmx2193 with the problem of downloading not completed due to deleting everything with flashtool, I have tried flashing it but it still has the same problem and its stock rom appears for realme March 20 when someone searched for it, help me with that
Click to expand...
Click to collapse
Do you have telegram? If so, I can help you (of course for free)
Hello guys,
i tried to flash an EU ROM on my Chinese Xiaomi Pad 5 Pro. Unfortunately, it failed
Symptoms:
Pad has full black screen.
It can not start into fast boot mode
cant be found by Xiaomi flash tool.
When i connect it to my computer and hold Power + Volume up or down, the computer beeps after a while
What happened:
i downloaded EU fastboot rom and unpacked with 7zip
unlocked bootloader of Xiaomi Pad
connected to xiaomi flash tool
copied unpacked rom files on C:\EU
start flash_all
after having an error "crclist or sparsecrclist" (Link), i added REM into the flash file, as mentioned on youtube and started again
at the end of the flash process it showed a problem with the "REM" line, that i added and the flash failed
I cant flash again because i cant get into the fastboot mode... Do you have any clue what i can do now?
Thanks a lot!
nappi
nappi90 said:
Hello guys,
i tried to flash an EU ROM on my Chinese Xiaomi Pad 5 Pro. Unfortunately, it failed
Symptoms:
Pad has full black screen.
It can not start into fast boot mode
cant be found by Xiaomi flash tool.
When i connect it to my computer and hold Power + Volume up or down, the computer beeps after a while
What happened:
i downloaded EU fastboot rom and unpacked with 7zip
unlocked bootloader of Xiaomi Pad
connected to xiaomi flash tool
copied unpacked rom files on C:\EU
start flash_all
after having an error "crclist or sparsecrclist" (Link), i added REM into the flash file, as mentioned on youtube and started again
at the end of the flash process it showed a problem with the "REM" line, that i added and the flash failed
I cant flash again because i cant get into the fastboot mode... Do you have any clue what i can do now?
Thanks a lot!
nappi
Click to expand...
Click to collapse
It seems to me that there is no EEA version for your device.
What code name, elish, dagu, enuma?
nappi90 said:
Hello guys,
i tried to flash an EU ROM on my Chinese Xiaomi Pad 5 Pro. Unfortunately, it failed
Symptoms:
Pad has full black screen.
It can not start into fast boot mode
cant be found by Xiaomi flash tool.
When i connect it to my computer and hold Power + Volume up or down, the computer beeps after a while
What happened:
i downloaded EU fastboot rom and unpacked with 7zip
unlocked bootloader of Xiaomi Pad
connected to xiaomi flash tool
copied unpacked rom files on C:\EU
start flash_all
after having an error "crclist or sparsecrclist" (Link), i added REM into the flash file, as mentioned on youtube and started again
at the end of the flash process it showed a problem with the "REM" line, that i added and the flash failed
I cant flash again because i cant get into the fastboot mode... Do you have any clue what i can do now?
Thanks a lot!
nappi
Click to expand...
Click to collapse
I guessed you downloaded and flashed the wrong firmwares/ROM to your device. This caused serious brick (the hardest brick) to your device. All the wrong firmwares have been flashed to every single partitions of your device. That's why your device can neither boot up nor enter fastboot mode. I got my Lenovo Yoga Tab 13 and some other Qualcomm devices into this serious brick. I got my Lenovo Yoga Tab 13 this brick by relocking bootloader. The only method that can fix your device error is to use QPST QFIL.
Requirements:
1.Windows 10 x64 preferred or above with WSL (Windows Subsystem for Linux) enabled. Because QFIL in QPST requires Sahara server (Linux) to run on your Windows.
2.Download and install HS-USB QDLoader 9008 driver for your Windows version.
3.Download and install QPST to your PC.
4.Download and unzip the correct fastboot ROM for your device to your PC. There are files with .img inside the zipped file. For example, boot.img, recovery.img and many others.
I am not sure if Mi Pad 5 Pro requires Provision process to flash via QPST or not? Some Qualcomm devices, for example Chuwi Hi Pad Pro, require Provision before getting permission to flash via Download mode using QPST.
Watch this tutorial to see the how-to-use-QFIL video. This video is quite old. There may be some chages in QFIL. You can google the newer tutorial about QFIL.
While your device does not show nothing but the black screen, follow the steps below:
1.Assumingly you have completed all the requirements above, open QFIL.
2.Connect USB from your PC to your device.
3.Load XML by matching all the files of rawprogram#.xml with patch#.xml. For example, If there are 6 files of rawprogram0.xml to rawprogram5.xml. You have to add rawprogram0.xml matching patch0.xml until rawprogram5.xml matching with patch5.xml to the Download list.
4.Press Download button in QFIL.
5.Hold volume Down (Some Qualcomm devices are volume UP and some are both volume at the same time) and press power button many times until the download process of QFIL starting up. This means your device has entered Download Mode.
6.Wait until the download process completed. Hopefully there is no error or no Provision process required.
7.Disconnect the USB from your device.
8.Your device should boot up showing Mi logo. If not, hold power button to try booting up your device.
Hope you can fix this. Or your device will turn into one of the most expensive paper weight.
Before step 3, i have to choose one programmer out of these:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
In step 3 I matched one by one rawprogram and patch file, but in the box it only shows the last pair. Do I have to click every time on download e.g. I choose rawporgram1.xml and patch1.xml and then press download or do I match all of them first like below, then there is only the last one visible.
In the end I get some failed to open com port handle messages. Do you know where this comes from?
NOSS8 said:
It seems to me that there is no EEA version for your device.
What code name, elish, dagu, enuma?
Click to expand...
Click to collapse
unfortunately, it seems you are right... this is the reason.....
nappi90 said:
Before step 3, i have to choose one programmer out of these:
View attachment 5770983
In step 3 I matched one by one rawprogram and patch file, but in the box it only shows the last pair. Do I have to click every time on download e.g. I choose rawporgram1.xml and patch1.xml and then press download or do I match all of them first like below, then there is only the last one visible.View attachment 5770981
In the end I get some failed to open com port handle messages. Do you know where this comes from?
Click to expand...
Click to collapse
1.Choose prog_ufs_firehose_sm8250_ddr_5.elf
2.Have you enabled WSL on your Windows 10 or above? Read requirement #1 of my post.
siamese007 said:
1.Choose prog_ufs_firehose_sm8250_ddr_5.elf
2.Have you enabled WSL on your Windows 10 or above? Read requirement #1 of my post.
Click to expand...
Click to collapse
to 2: yes, i did.
About the rawprogram1 - rawprogram5: Do you know, if i need to download after matching each pair e.g. rawprogram1 = patch 1; click download; rawprogram2 = patch 2; click download etc.
nappi90 said:
to 2: yes, i did.
About the rawprogram1 - rawprogram5: Do you know, if i need to download after matching each pair e.g. rawprogram1 = patch 1; click download; rawprogram2 = patch 2; click download etc.
Click to expand...
Click to collapse
Add all the rawprogram0.xml to rawprogram5.xml matching with patch0.xml to patch5.xml files to the Download list at once and press download button.
My experiment:
I have put my Mi Pad 5 Pro 5G into Download Mode (EDL) and run QFIL > Partition Manager. QFIL cannot access the partitions of my device. This probably means my device may require Provision to do this. So it may mean yours requires Provision to flash the firmware with QFIL also.
Now it's come to my most fear that you will need the Provision file which is not included in the fastboot firmware/ROM. You have to ask this file from Xiaomi Customer Services. And your device's warranty has been voided since you have unlocked bootloader.
Try 1 of the following methods.
1.Ask someone who has the same device as yours to ask Xiaomi Customer Services for Provision file. Tell them you need the file to back up partition of your device. The Customer Services may ask the serial number and other info about that person's device for verify the customer warranty.
2.Ask Xiaomi Customer Services for the Provision file for your deivce by yourself. Tell them that your device got brick and can be accessed only by Download Mode (EDL) via QPST or QFIL.
3.Google to find the Provision file for your device on the internet. It's very difficult. I still cannot find the Provision file for my old Redmi K30 5G released in Jan 2020, around 3 years ago.
4.Google the method to work around your Sahara error. And hope your device does not need Provision to flash the firmware via Download Mode (EDL).
5.No offense. If you have extra money, buy the new one and ask Xiaomi Customer Services for the Provision file. Or buy Lenovo devices. They are not required Provision to flash firmware via Download Mode (EDL).
If you have the Provision file, ask me again of how to do Provision. Or google the way to do Provision on the internet.
Wish you best luck.
siamese007 said:
Add all the rawprogram0.xml to rawprogram5.xml matching with patch0.xml to patch5.xml files to the Download list at once and press download button.
My experiment:
I have put my Mi Pad 5 Pro 5G into Download Mode (EDL) and run QFIL > Partition Manager. QFIL cannot access the partitions of my device. This probably means my device may require Provision to do this. So it may mean yours requires Provision to flash the firmware with QFIL also.
Now it's come to my most fear that you will need the Provision file which is not included in the fastboot firmware/ROM. You have to ask this file from Xiaomi Customer Services. And your device's warranty has been voided since you have unlocked bootloader.
Try 1 of the following methods.
1.Ask someone who has the same device as yours to ask Xiaomi Customer Services for Provision file. Tell them you need the file to back up partition of your device. The Customer Services may ask the serial number and other info about that person's device for verify the customer warranty.
2.Ask Xiaomi Customer Services for the Provision file for your deivce by yourself. Tell them that your device got brick and can be accessed only by Download Mode (EDL) via QPST or QFIL.
3.Google to find the Provision file for your device on the internet. It's very difficult. I still cannot find the Provision file for my old Redmi K30 5G released in Jan 2020, around 3 years ago.
4.Google the method to work around your Sahara error. And hope your device does not need Provision to flash the firmware via Download Mode (EDL).
5.No offense. If you have extra money, buy the new one and ask Xiaomi Customer Services for the Provision file. Or buy Lenovo devices. They are not required Provision to flash firmware via Download Mode (EDL).
If you have the Provision file, ask me again of how to do Provision. Or google the way to do Provision on the internet.
Wish you best luck.
Click to expand...
Click to collapse
Thanks a lot for your big effort to help me. Seems like i need this EDL mode. Currently, i am in Beijing in lockdown and its not the best time to go around and find a mi customer service. Meanwhile, i look for a solution for the sahara problem (see point 4).
@siamese007 hi,
I tried your method to unbrick a Mi pad 5, but unfortunately an authorization is needed...
I am trying to ask Xiaomi help. I don't have any answer for the moment...
If I try to ask them the Provision file, what I should do with ?
Could you explain me your method ? Do you think it’s a file they’re capable of giving away?
Thank you in advance,
Nicolas
Heavymistick said:
@siamese007 hi,
I tried your method to unbrick a Mi pad 5, but unfortunately an authorization is needed...
I am trying to ask Xiaomi help. I don't have any answer for the moment...
If I try to ask them the Provision file, what I should do with ?
Could you explain me your method ? Do you think it’s a file they’re capable of giving away?
Thank you in advance,
Nicolas
Click to expand...
Click to collapse
Hello,
What happened with your device? Is your device Mi pad 5 nabu? Why can you not flash your device with Mi Flash Tool?
If you want to flash your device with QFIL in EDL mode, all Xiaomi devices require provision files to do it. Provision file is not supposed to be secret of company use only. Some devices have done provision for users at their factories. Otherwise users will be required to do provision by themselves. IMO provision files should be added to the firmware zip file for EDL mode.
For normal case, users can use Mi Flash tool to flash firmware. So Xiaomi might think provision files are not needed.
siamese007 said:
Hello,
What happened with your device? Is your device Mi pad 5 nabu? Why can you not flash your device with Mi Flash Tool?
If you want to flash your device with QFIL in EDL mode, all Xiaomi devices require provision files to do it. Provision file is not supposed to be secret of company use only. Some devices have done provision for users at their factories. Otherwise users will be required to do provision by themselves. IMO provision files should be added to the firmware zip file for EDL mode.
For normal case, users can use Mi Flash tool to flash firmware. So Xiaomi might think provision files are not needed.
Click to expand...
Click to collapse
Thanks a lot for your answer,
I brick my tablet by corrupting UFS files after a fake manip by following a tutorial. It is indeed a tablet pad 5 with as code name "nabu".
Only EDL works, i can't boot fastboot or recovery (black screen). Mi Flash tool needs a Xiaomi authorization to flash with EDL mode. I don't know if Xiaomi can give me a temporary permission for that ?
I tried to flash the ROM with QFIL in EDL but i had an error "Only nop and sig tag can be recevied before authentication.".
So I guess I have to get the file you were talking about to go further?
Heavymistick said:
Thanks a lot for your answer,
I brick my tablet by corrupting UFS files after a fake manip by following a tutorial. It is indeed a tablet pad 5 with as code name "nabu".
Only EDL works, i can't boot fastboot or recovery (black screen). Mi Flash tool needs a Xiaomi authorization to flash with EDL mode. I don't know if Xiaomi can give me a temporary permission for that ?
I tried to flash the ROM with QFIL in EDL but i had an error "Only nop and sig tag can be recevied before authentication.".
So I guess I have to get the file you were talking about to go further?
Click to expand...
Click to collapse
I tested with my device to access its partition tables but could not. And got error saying something about "authentication". So I guess yes you need to do provision before being able to flash the ROM in EDL mode with QFIL.
From my experience, the provision file is xml with some code to access the system on the chip that allows QFIL to flash firmware in EDL mode. Not sure if this provision for the SoC can be used widely across any devices with the same chipsets. You may look for the provision file from other devices with the same chipset as your device's. I will explain how to do provision later.
Hello !
I've discovered a new way to root oppo a5s ( CPH1909) after the new security update which removed the mtk-easy-su root
(NOTE : YOU WILL REQUIRE :
1- THE LATEST FRIMWARE UPDATE TO OPPO A5S
2- A PC / Laptop
3- MTK Client Tool -link will be sent here in comments <uploaded by me>
4 - mediatek driver auto installer (link is provided)
5 - SP flash tool <link is provided>
6 - a usb cable
6 - Scatter File (WILL BE UPLOADED HERE IN COMMENTS )
7 - Magisk Manager for your phone (v.26) <from github>
8 - UNLOCK BOOTLOADER USING MTK CLIENT TOOL (No data wipe needed + STEPS WILL BE PROVIDED HERE TOO)
9 - ( optional) MCT MTK BYPASS REV4 ( BUT DOWNLOAD IT IF THERE IS A PROBLEM FLASHING IN SP FLASH TOOL) + <link is provided>
NOTE BEFORE STARTING : If links have problems or it is inaccessible , please tell me to send new links in comments .
also , MAKE SURE YOUR DEVICE IS UPDATED TO THE LATEST VERSION (A.46) BECAUSE IF YOU FLASHED THE BOOT.IMG (you will know what does this file do here later ) WHICH IT IS FOR THE LATEST UPDATE AND YOUR DEVICE IS OLDER THAN IT , YOUR DEVICE MAY BRICK , AND I AM NOT RESPNSIBLE FOR ANY DAMAGES FOR YOUR DEVICE
but , if anything happens , tell me , i might help you .
BIG ULTRA NOTE BEFORE STARTING : If you will share these steps in your website, your youtube video, or anything else , please do not forget to mention the source !!!
So , let's start
STAGE 1 : PATCHING BOOT.IMG
1 - download the latest frimware here
2 - choose the latest version (a.46)
3 - after downloading and extracting the file , you will find many folders > Enter the folder (frimware) , find and copy the boot.img file to your phone
4- patch it by magisk manager
5 - copy the patched boot.img ( usually located in Downloads folder in your phone)to your pc ( note : you will need it later )
6 - replace the patched boot.img with the original one in the folder you have extracted the rom in ( but before it, please backup the original one in an external folder , and also change the patched boot.img to ( "boot.img")
Note : I uploaded the boot.img file if you want to save time instead of downloading the whole rom !
STAGE 2 : Installing MEDIATEK usb Drivers
7- open Mediatek driver auto installer
8 - while the program is opening , a window appears which asks yo if you allow the installer to make changes ... blabla , just click allow (ok)
STAGE 3 : UNLOCKING BOOTLOADER
(NOTE BEFORE STARTING : THERE IS NO DATA WILL BE LOST , AND DO NOT ENABLE THE OEM UNLOCK IN DEVELOPER OPTIONS , THE MTK CLIENT TOOL WILL GIVE AN ERROR DURING UNLOCKING , JUST KEEP IT DISABLED !!!!)
8 - After the program installed the drivers , go to MTK CLIENT TOOL , choose the device name ("OPPO A5S") , choose "UNLOCK BOOTLOADER"
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
9 - turn your phone off , and then press these keys (" VOLUME UP + VOLUME DOWN <<in the same time>> ") and plug your phone in using the usb cable , once you hear a sound from your pc ( the usb connection sound) , you can stop pressing , because the phone is in BROM mode ( which you can flash anything but when you unlock the bootloader first
10 - click "Start" button in MTK CLIENT TOOL in your pc , when you see messages appear on the right of the MTK CLIENT TOOL APP , DON'T UNPLUG YOUR PHONE !!!!
When the progress bar achieves 100% in the program , unplug your phone and press power button , if you found a warning message while booting , so , unfortunately....
YOU SUCCESSFULLY UNLOCKED YOUR BOOTLOADER !!!!! XD
So , do not panic if it appears !
The message will say (" your device is unlocked and cannot be trusted , rebooting in 5 seconds ") and then another message appears (" dm-verity error,
Your android system / device is corrupted, please select whether you want to boot in E10 mode or RESTART mode ")
It will give you two choices , you SHOULD choose the RESTART mode by pressing VOLUME DOWN , and tadaaaa your phone is booting normally and the data DIDN'T LOST AT ALL ( like me )
BIG ULTRA NOTE : IF THE WARNING MESSAGE DIDN'T APPEAR , SO YOUR BOOTLOADER ISN'T UNLOCKED Successfully , I ADVICE YOU TO DO THE STAGE 3 STEPS AGAIN AND KEEP AN EYE ON THE MESSAGES APPEARANCE ON THE RIGHT OF THE MTK CLIENT TOOOOL ( IF IT SHOWS THE DEVICE MODEL , THE PROCESSOR , ETC ) SO , CONTINUE THE STEPS UNTIL YOU FINISH STAGE 3 STEPS ! (as this error appears usually when unlocking bootloader)
STAGE 4 ( optional) : BYPASS
Note : you might need this stage if you found an error in sp flash tool (" VERIFIED BOOT IS ENABLED") as it is usually doesn't appear in an unlocked device !
1- open MCT MTK BYPASS , choose the chipset ( MT6765 )
2 - REBOOT your phone into brom mode ( vol up + vol down)
3 - connect your device and click start , and done !
Stage 5 ( the last stage) : Flashing
1- open SP FLASH TOOL
2 - locate the scatter file that I'll provide it in comments here !
NOTE ABOUT THE SCATTER FILE : the scatter file which comes with the frimware is CORRUPTED , I've tried to fix it and it worked !
because when I worked with this corrupted scatter file , it gave me an error while flashing !! , just editing it on my way has solved it anyway
3 - you will see a list of many files , just untick EVERY THING EXCEPT FOR THE BOOT.IMG (Make sure it is the patched one)
4 - BOOT your phone into brom mode (turn it off , press volume up + volume down , connect it with your pc)
5- once you hear the usb connection sound from your pc , click on "DOWNLOAD" button , and wait until a correct sign (√) appears in a window
6 - REBOOOOT
7 - let's Celebrate!
--thanks to the user @Anonymous V for being online when i applied these steps , he was answering every question i ask.
-- if you want anything , or need some help , type in comments here , and I and Anonymous V will be available .
(First time typing a thread )
IMPORTANT NOTE : Please put the boot.img + preloader.bin + the scatter file in a folder , then locate the scatter file using SP Flash Tool, Untick the preloader.bin to avoid bricking the device
ALSO , PLEASE DO NOT PUT THE BOOT.IMG AND THE SCATTER FILE AND FLASH THE BOOT.IMG WHILE PRELOADER.BIN IS NOT AVAILABLE IN THE SAME FOLDER , AN ERROR WILL APPEAR ( ERROR_INVALID_PRELOADER)
REPEAT : DO NOT FLASH PRELOADER.BIN , ONLY PUT IT IN THE SAME FOLDER WITH THE PATCHED BOOT.IMG AND SCATTER FILE, AND FLASH ONLY BOOT.IMG
Another note : Please install the MTK Drivers using MTK Driver Auto Installer + the drivers which comes with MTK Client Tool (UsbDK and choose your arch. 64bit or 32bit(86bit)
+Please ignore the x that i made in the MTK Client Tool screenshot
Thanks for @jimenezshown for providing this info !
MTK DRIVER AUTO INSTALLER : here
Scatter File : here
MTK CLIENT TOOL : here
MCT MTK AUTH BYPASS TOOL (uploaded by Mobile RTX website ) :here
SP FLASH TOOL : here
the patched boot.img file ( to save your time instead of getting the original file from the frimware (rom) and patch it , i thought that providing a patched boot.img by magisk app may help !) : here
note : it is patched by the latest magisk manager app (v.26)
Thank you for creating the thread @Zezo 089 , I am using Oppo A5s and now I found a way to root the phone.
I've already download all the requirements first to prepare.
But, I could not run the "MTK CLIENT TOOL V5.2".
It was just nothing appear when I double click the application.
I use Windows 11. Did it caused by the Windows?
Other question is what step is the boot.img file needed?
fb.hikmawan said:
Thank you for creating the thread @Zezo 089 , I am using Oppo A5s and now I found a way to root the phone.
I've already download all the requirements first to prepare.
But, I could not run the "MTK CLIENT TOOL V5.2".
It was just nothing appear when I double click the application.
I use Windows 11. Did it caused by the Windows?
Other question is what step is the boot.img file needed?
Click to expand...
Click to collapse
Bruh
Just turn off your Windows Defender Real-Time protection and it will work
Just , patch it using Magisk Manager (v.26)
fb.hikmawan said:
Thank you for creating the thread @Zezo 089 , I am using Oppo A5s and now I found a way to root the phone.
I've already download all the requirements first to prepare.
But, I could not run the "MTK CLIENT TOOL V5.2".
It was just nothing appear when I double click the application.
I use Windows 11. Did it caused by the Windows?
Other question is what step is the boot.img file needed?
Click to expand...
Click to collapse
fb.hikmawan said:
Thank you for creating the thread @Zezo 089 , I am using Oppo A5s and now I found a way to root the phone.
I've already download all the requirements first to prepare.
But, I could not run the "MTK CLIENT TOOL V5.2".
It was just nothing appear when I double click the application.
I use Windows 11. Did it caused by the Windows?
Other question is what step is the boot.img file needed?
Click to expand...
Click to collapse
Get it from the rom file ( link is provided in replies) and patch it yourself from magisk manager , or you can get the patched boot.img file ( link in replies, too) and continue these steps as nothing happened
fb.hikmawan said:
Thank you for creating the thread @Zezo 089 , I am using Oppo A5s and now I found a way to root the phone.
I've already download all the requirements first to prepare.
But, I could not run the "MTK CLIENT TOOL V5.2".
It was just nothing appear when I double click the application.
I use Windows 11. Did it caused by the Windows?
Other question is what step is the boot.img file needed?
Click to expand...
Click to collapse
Also , try to open this program in windows 10
Because it did these steps using windows 10 , not 11
bro this guide is so long and boring and not safe
the best way to root this phone is through mtk client (github)
with that tool you can
1.backup the whole firmware in case of an error or a malfunction
2. unlock bootloader of any mediatek phone including oppo a5s
3. rooting this device without any risk
4. you can flash any partition if something happened within this tool without the use of SP Flash tool
the link: https://github.com/bkerler/mtkclient
Khalyl22 said:
bro this guide is so long and boring and not safe
the best way to root this phone is through mtk client (github)
with that tool you can
1.backup the whole firmware in case of an error or a malfunction
2. unlock bootloader of any mediatek phone including oppo a5s
3. rooting this device without any risk
4. you can flash any partition if something happened within this tool without the use of SP Flash tool
the link: https://github.com/bkerler/mtkclient
Click to expand...
Click to collapse
Bro
I made this guide with all of its details to help advanced people , especially The Beginners
+ Bro, i concerned using MTK Client Tool to unlock bootloader , Warned people to backup the WHOLE DATA and flash the boot.img after patching (using SP flash tool)
But it is also a good point to flash any partitions if a brick happened or something else using SP flash tool
Khalyl22 said:
bro this guide is so long and boring and not safe
the best way to root this phone is through mtk client (github)
with that tool you can
1.backup the whole firmware in case of an error or a malfunction
2. unlock bootloader of any mediatek phone including oppo a5s
3. rooting this device without any risk
4. you can flash any partition if something happened within this tool without the use of SP Flash tool
the link: https://github.com/bkerler/mtkclient
Click to expand...
Click to collapse
NOTE THAT I WARNED PEOPLE BEFORE DOING THIS
Khalyl22 said:
bro this guide is so long and boring and not safe
the best way to root this phone is through mtk client (github)
with that tool you can
1.backup the whole firmware in case of an error or a malfunction
2. unlock bootloader of any mediatek phone including oppo a5s
3. rooting this device without any risk
4. you can flash any partition if something happened within this tool without the use of SP Flash tool
the link: https://github.com/bkerler/mtkclient
Click to expand...
Click to collapse
+ Why tf they backup the rom ?
as they can download the Flashable Official rom , and flash it using SP FLASH TOOL ( consider that you should untick preloader before flashing to avoid bricking your device)
Khalyl22 said:
bro this guide is so long and boring and not safe
the best way to root this phone is through mtk client (github)
with that tool you can
1.backup the whole firmware in case of an error or a malfunction
2. unlock bootloader of any mediatek phone including oppo a5s
3. rooting this device without any risk
4. you can flash any partition if something happened within this tool without the use of SP Flash tool
the link: https://github.com/bkerler/mtkclient
Click to expand...
Click to collapse
@Anonymous V What are your comments about that ?
Zezo 089 said:
@Anonymous V What are your comments about that ?
Click to expand...
Click to collapse
actually he is just saying about what can you do using the MTK client tool not "what to do about it " and i dont know if he really read your tutorial because this guy " @Khalyl22 "
sounds that he just wants to sounds smart and also boring? i dont know why he said that but its better to give a long and detailed tutorial to give people more info and understanding about what to do to avoid error and to give comfort to people while doing it and i dont fcking know why he said that its not safe although you give all the necessary steps to avoid error while doing it including the warning " Please Backup you Phone before Doing This " and also i think his not aware about the MTK client Gui version which you used in your tutorial i recommend the Gui version for the people who cant handle the terminal version because they are afraid in getting error i think he is pointing about the MTK client terminal version which i often used, also bro there is a reason why he said backup your whole firmware before doing it and actually his right about that when you backup your whole firmware in your phone you can backup all the data,apps,system preferences,imei and other things which you can restore if the phone fcked up where as the stock flashable rom is different its because its already set by default or factory default by the manufacturer which means its back to old state when you bought the phone well it depends though if you dont care about the data in your phone you can just reflash the stock flashable rom and if you care about the data in your phone you can backup your phones firmware and use that later to restore your phone.
Mine doesn't want to let me enter in BROM mode, I can only hear a plug and unplug loop sound when I try to hold Vol UP + Vol down.