Related
My Xperia P detects a USB connection fine, but doesn't detect the disconnection. For example the charging light continues to glow after unplugging. Only way to reset it is to turn it off and remove the internal battery connector.
Are there any HW experts here? I'm quite good with a soldering iron if some component is broken. It's a really annoying error.
thanks / erak
Stock firmware? What version?
ChikeD said:
Stock firmware? What version?
Click to expand...
Click to collapse
Sorry, I forgot to mention it. Because the error remains regardless of firmware. Bootloader locked and never tried custom firmware. Right now on 6.1.B.0.544
erak said:
Sorry, I forgot to mention it. Because the error remains regardless of firmware. Bootloader locked and never tried custom firmware. Right now on 6.1.B.0.544
Click to expand...
Click to collapse
Never mind custom ROMs, have you tried .54 or .75?
Could be HW problem.
ChikeD said:
have you tried .54 or .75?
Click to expand...
Click to collapse
Yes
erak said:
My Xperia P detects a USB connection fine, but doesn't detect the disconnection. For example the charging light continues to glow after unplugging. Only way to reset it is to turn it off and remove the internal battery connector.
Are there any HW experts here? I'm quite good with a soldering iron if some component is broken. It's a really annoying error.
thanks / erak
Click to expand...
Click to collapse
You did not root or anything? If you did not, send it for service
AndroidNoob69 said:
You did not root or anything?
Click to expand...
Click to collapse
Rooting doesn't cause this
AndroidNoob69 said:
send it for service
Click to expand...
Click to collapse
Out of warranty
erak said:
Rooting doesn't cause this
Out of warranty
Click to expand...
Click to collapse
I am not saying rooting caused it, just that if you root you lose your warranty unless you unroot. Since you are out of warranty, i think you need to pay as xda does not fix hardware problems
Sent from a JB Moonbreaker 3.5 device
AndroidNoob69 said:
you lose your warranty unless you unroot.
Click to expand...
Click to collapse
Precisely
AndroidNoob69 said:
Since you are out of warranty, i think you need to pay as xda does not fix hardware problems
Click to expand...
Click to collapse
XDA can of course not fix anything by itself, it's a forum. Hardware engineers lurk here also, and it was them I was asking for help. But thanks for your time
Where are you gonna get the parts
Sent from a JB Moonbreaker 3.5 device
AndroidNoob69 said:
Where are you gonna get the parts
Click to expand...
Click to collapse
The hardest part is to find the source of the error, could just be a broken trace. I thought someone might be able to point me to the correct location on the pcb.
In Europe you can buy standard components from for example farnell or elfa. If it's more product specific, ebay is an option, or a spare broken phone.
It's a hobby and I've fixed both big and small electronics, for example iPhone fpc:s. But tiny smd components can be hard, if not impossible without the correct tools.
If you don't have anything constructive to say regarding this thread I propose that you send me a pm instead. BTW, your signature is huge.
I have this problem flashing up, i blow air in the module and teardown the phone to clean up, but nothing seems to work maybe i have to try with other botom module, some of us have this problem, and how do you fixed? thanks my model is lg g5 h830 form tmobile
No one?
riper2510 said:
No one?
Click to expand...
Click to collapse
More details?
Nick216ohio said:
More details?
Click to expand...
Click to collapse
It suddently star to do that after i run out of battery, do you know how i can fix it?
I am have used RR rom with dark kernel by movez for few days it have charged b/w 1600-1900 amp but the next day it does charge b/w 400-500amps..
I thought it was kernel fault then flashed viper OS but same result
Then flashed Xiaomi.eu and epic rom then same result charging speed is between 500-800 amps...
Then flashed fastboot rom charging speed does not charge more than 1000 amps
Should I need to change charger and cable ,can I buy another stock cable and use ,!! Does it solve the problem ??
Need a permanent solution
Someone help me
Thanks in advance:highfive:
???????
Which method you are using to measure current ? Probably usb port on your phone/charging cable has rust accumulated or phone's USB port is faulty. Try cleaning it and check with different cable/charger. If still problem, change usb port on phone.
kashinath said:
Which method you are using to measure current ? Probably usb port on your phone/charging cable has rust accumulated or phone's USB port is faulty. Try cleaning it and check with different cable/charger. If still problem, change usb port on phone.
Click to expand...
Click to collapse
My charger and cable perfectly works with my Galaxy j7 and charges faster
But will try to buy new charger
Try viper os I'm sure you will never face this issue
rahuldholpuria said:
Try viper os I'm sure you will never face this issue
Click to expand...
Click to collapse
Facing same issue on viper os as I already mentioned in OP
Nexus-exprerience is working fine for me in b/w 1.5amp
Need a permanent fix any help is appreciated:good:
Try to reflas miui again
agriculture said:
Facing same issue on viper os as I already mentioned in OP
Nexus-exprerience is working fine for me in b/w 1.5amp
Need a permanent fix any help is appreciated:good:
Click to expand...
Click to collapse
Try to reflash miui again then flash any rom
rahuldholpuria said:
Try to reflash miui again then flash any rom
Click to expand...
Click to collapse
Tried, issue persists
Have you tried with another fast charger
agriculture said:
Tried, issue persists
Click to expand...
Click to collapse
Have you tried with another fast charger if no
Then try it
Okk
Probably because your charging port is dead... It happened to me but I replace the charging port with a new one and everithing is fine now
Snap239 said:
Probably because your charging port is dead... It happened to me but I replace the charging port with a new one and everithing is fine now
Click to expand...
Click to collapse
Yes brother it seems same issue for me , what will be the cost for changing Charing port !?
agriculture said:
Yes brother it seems same issue for me , what will be the cost for changing Charing port !?
Click to expand...
Click to collapse
www.aliexpress (DOT) com/item//32755867272.html
I bought this part, waiting for it to arrive now. Same issue as you.
Benjimaestro said:
www.aliexpress (DOT) com/item//32755867272.html
I bought this part, waiting for it to arrive now. Same issue as you.
Click to expand...
Click to collapse
Can you show screen shot of the product -or product name which you ordered
agriculture said:
Can you show screen shot of the product -or product name which you ordered
Click to expand...
Click to collapse
https://i.imgur.com/maprhCK.png
How's that?
It takes my phone also a long time to charge up I have used different chargers do I also have to replace the port?
Flash agni kernel
And btw don't look at the charging current as soon as you connect
Torn off screen for 2 min or so and then check
ilvmyname said:
Flash agni kernel
And btw don't look at the charging current as soon as you connect
Torn off screen for 2 min or so and then check
Click to expand...
Click to collapse
Tried with agni kernel same issue for me
agriculture said:
Tried with agni kernel same issue for me
Click to expand...
Click to collapse
Change rom and try
ilvmyname said:
Change rom and try
Click to expand...
Click to collapse
No use brother, I figured it out its my charger problem
Ordered new one :good:
hello to all, someone by chance knows what kind of cable to buy that allows you to use Lotg and charging together? I tried it with a Y cable but nothing...:crying:
Alexkungfu said:
hello to all, someone by chance knows what kind of cable to buy that allows you to use Lotg and charging together? I tried it with a Y cable but nothing...:crying:
Click to expand...
Click to collapse
I want to know too
Alexkungfu said:
hello to all, someone by chance knows what kind of cable to buy that allows you to use Lotg and charging together? I tried it with a Y cable but nothing...:crying:
Click to expand...
Click to collapse
wagner2029 said:
I want to know too
Click to expand...
Click to collapse
Sorry for the bump but I want to know too ^_^
Did any of you got it working? I couldn't get it to work.
msacco4 said:
Sorry for the bump but I want to know too ^_^
Did any of you got it working? I couldn't get it to work.
Click to expand...
Click to collapse
doesn't work, I tried a few and none worked.
you must use one function at a time , both at the same time do not work
Hi guys,
I've broken my Display from my Mi 10 5g.
There a 2 different types of displays. One produced by Samsung (Version S) and one by Huaxing (Type C)
I've tried to find out with App Device Info HW, at Point LCM is: j2_p2_1_38_0c_0a_dsc_cmd.
With bugreport at line msm_drm.dsi_display0=qcom
Under version information is nothing noted for display.
Maybe somebody could help me here, because I can still use my phone and want to buy a new display and then disassembly.
Cheers, Andy
This is Samsung screen if I'm not mistaken.
c_LOSE_d said:
This is Samsung screen if I'm not mistaken.
Click to expand...
Click to collapse
Thank you, you was right.
I took one from Aliexpress where another board was included, so that I could use both versions.
Worked quite good for me
nrg23 said:
Thank you, you was right.
I took one from Aliexpress where another board was included, so that I could use both versions.
Worked quite good for me
Click to expand...
Click to collapse
Hi. I have the exact same problem.
Can you elaborate?
How did you find out which version it was?
Also, could you share the AliExpress link please?
c_LOSE_d said:
This is Samsung screen if I'm not mistaken.
Click to expand...
Click to collapse
IS there a way I can check this on my phone?
I have the same problem.
Yes, use App Device Info and look at the item LCM.
My number was j2_p2_1_38_0c_0a_dsc_cmd and it's the Samsung panel.
If you have the other one there should by another number here, but I'm not sure (XX)
j2_p2_1_XX_0c_0a_dsc_cmd I think it's 42 or so.
But when you buy this one:
Aliexpress
you won't have this problem.
Hope I could help you.
nrg23 said:
Yes, use App Device Info and look at the item LCM.
Click to expand...
Click to collapse
nrg23 said:
I downloaded the app but cannot find the "LCM" anywhere.
Click to expand...
Click to collapse
nrg23 said:
Thanks for the info.
Click to expand...
Click to collapse
Where exactly is this located in the app?
Is your phone rooted? Maybe that's why I cant see.
montaage said:
Where exactly is this located in the app?
Is your phone rooted? Maybe that's why I cant see.
Click to expand...
Click to collapse
Yes my phone is rooted.
I've got it from log too, so you can generate a log file with the service and feedback application and read it out from there.
I would read the file from a PC because it's very big.
Can you give me some instructions how?
Which log do I generate and how do I download it?
nrg23 said:
Yes my phone is rooted.
I've got it from log too, so you can generate a log file with the service and feedback application and read it out from there.
I would read the file from a PC because it's very big.
Click to expand...
Click to collapse
I'm sorry, I was away a few days.
I've made a mistake, I tokk the informations from the log generated by twrp recovery.
There's another possibility, you can make a picture with another phone (or use a looking glass) to see if the pixels are diamond shaped, if they are it's samsung.
If you want to take the "secure" way, just buy the c-version with the conversion board. If you had huaxing, the display will work immediatly, if not just apply the board plus it's the cheaper one ;-)
mine (( j2_mp_42_02_0b_dsc_cmd )) is huaxing or samsung? from post before, i can see that mine is not 38, but 42, which means its huaxing?