I have no expert technical background. Anyway, while I was at college I had my phone turned off, so after I went back home I turned it on again. It entered Huawei eRecovery screen. I tapped Download latest version and recovery, then download and recover and went to Starting WIFI screen. After few laps of the dot around the WIFI logo I connected to my WIFI. After a few more laps I got Getting package info failed screen displayed. I tried to recover my phone many times, even by rebooting, and I still got the same error. Can anybody help me?
I entered FastBoot mode and I'm stuck now. I did what it said and opened HiSuite, but HiSuite did not recognize my phone.
EDIT: I managed to exit FastBoot somehow.
Anyone???
Come on, please answer.
Related
Ok,I tried to install a different OS, on my phone via ODIN, i couldnt get it right the first couple of times so i kept doing more research. SO after i THOUGHT i had a solution i tried again. i was on the last step of the finalization and it said " about two minutes left" or something like that, and i waited about 40 minutes and it still said the same thing. so i thought i'd UNPLUG IT AND TRY AGAIN. well now after i do so,
i try to plug my device in again and it doesn't read it at all, This ALL HAPPENED AFTER THE PHONE ENCOUNTERED THE FIRMWARE PROBLEM WITH THE PHONE... WARNING SIGN... AND COMPUTER.
the only thing i was able to do was go to recovery mode, or download mode. CAN NOT GET INTO THE PHONE. now i'm smart enough to click an option on the recovery menu, but my power button or home button, or ANY Button, would not respond, besides the volume buttons to go up and down. So since the computer will not detect it, i dont know what to do, and i am using the factory cables, and i tried KIES AND ODIN. I have uninstalled drives in and out. still no solution, i read posts ever since last morning until now and decided to create my own posts for my own problems and seek help from people like ones on here who ACTUALLY KNOW WHAT THEY ARE DOING.
it starts up as Samsung GT-i9100 and they goes to Android System Recovery <3e>
and below reads in yellow,
Deleting Cryptoin Meta Data
--Copying media files...
Successfully copied meida files.
# MANUAL MODE #
--Updating application...
Successfully updated application.
--Appling Multi-CSC...
Successfully applied multi-CSC.
and shows and android robot with a white triangle and Orange ! mark in the middle.
The crazy thing about it is that i could use a button as an (Enter key) before i tried to flash my phone , before that i just cleaned the memory,
and once again after i removed phone from ODIN at about 98% im guessing, after i waited 40 minutes when it said about 2 minutes remaining. i was not able to try any other solution or connect to my laptop. and ive tried others, and my other phone connects fine. so i know i did something wrong....
Please Assist me, i'd really appreciate the time and effort,
To start off, I suffered, what seems to be a common problem, of the fingerprint unlock on Samsung Galaxy S6 Edge randomly being unable to recognise my fingerprint. Followed by my back-up password not being accepted. Unfortunately, I turned off my data and wifi before the phone locked so the problem doesn't seem to be able to resolve itself unless I Factory Reset the phone.
This i am happy to do as long as I can find some way to retrieve the media files from the phone (just pictures and videos). I read up and watched some videos where some people were able to use ADB through Recovery Mode or Field Test mode, and pull the files from the phone. These people however were using older models of Android phones but I decided to read numerous pages etc and go ahead and try.
I set up everything (I believe) i needed on my Mac Book pro in order to use the Adb Terminal. However when I tried to connect my phone Adb couldn't detect my device. I then decided (after reading somewhere to do so) to press "Apply update using ADB" on the Recovery menu. Again, Adb did not detect my device.
i left this screen up on my phone which resulted in "dm-verity verification failed..." appearing at the bottom of the screen. It then switched back to the Recovery menu and continues to show "dm-verity verification failed..." at the base of the screen. Now when I try and power up the phone normally, the start up screen just repeatedly flashes and it goes no further than that.
Im not completely brain dead when it comes to this stuff but I obviously don't fully understand what I am doing, So Im wondering if there is a genius out there who, even after what I've done, can help me pull the files from my phone before I have to Factory Reset!
I rooted my phone with kingroot and it worked fine and i didn't touch it anymore. then i came back i tried to turn him on and the screen didn't turned on so i removed the battery and i tried again, but same result. now every time i use wiko software to go back to stock rom, it gets stuck on this black screen saying "entering nvflash recovery mode/nv3p server". can someone help me? thanks
Hello guys, here is the thing that happened to me. One day my Huawei P9 Lite started lagging and suddenly I couldn't even turn Wifi, bluetooth, mobile data or anything on. I couldn't even open the settings app. So I decided to factory reset the phone from recovery screen while booting. Factory reset resulted as successful, but after the reboot I got into first set up screen where I can only get over 2 steps where I come to choose my region and here is where it all lands. When I press next, it looks like going to next step but there is black screen for a second and it turns back to choosing region. I tried using all the regions but nothing. Next thing, I wanted to use download mode to reflash the device using downloaded stock firmware but I couldn't move the file to phone because the phone was not fully loaded. Next thing I tried was that I used ADB to push a file to computer and I got error. I have all drivers installed properly. Then I used Fastboot and rescue mode, where it says that my phone's bootloader is unlocked but when I try to flash device, it says 'Command not allowed'. I found on internet that I have to turn on debugging mode in settings but I can't start the phone so I don't know what to do.
Please help me, I don't know what else to do
Thank you very much
Hi all,
To get right to the point, my phone doesn't switch on, and I cannot get into recovery/download mode.
The story:
After my apps kept on crashing for no reason, I restarted the phone. After the restart, when it asked my pin, the google app kept on crashing and the phone completely froze up.
Here is where I suspect I made a HUGE mistake. I Took out the battery and started up the phone again. It immediately told me that the system is corrupt and "cannot be trusted".
I continue the boot process, only to land in a boot loop. I take out the battery once again and restart the phone.
After displaying the LG logo, it just turned off. And that was the last time I could get it on.
I tried booting into recovery, but the phone won't even switch on to begin with.
Absolutely no response. Screen stays pitch black.
I tried doing it with the USB cable in, same result. Nothing.
I also read up on the different combinations to get into download mode to no avail.
Stock ROM and firmware installed, no mods whatsoever.
Android 8.0
Can anyone please suggest anything I can do to save my device?