Hello everyone, I am new here. I think I broke my pad 4. I had changed the battery. That also all worked. I did a test start, everything great. Then I did the metal part over the contacts and put the back cover back on. Now it only starts in EDL mode. I can't get out of it. The FlashTool recognizes the pad but when I want to flash it comes the following log. Have I created a short circuit and the pad is now defective?
Can I try something else?
[17:37:24 COM10]: serial port COM10 opend successfully
[17:37:24 COM10]:[COM10]:start flash.
[17:37:24 COM10]:received hello packet
[17:37:24 COM10]:programmertype: 0
[17:37:24 COM10]:vboytest:C:\clover_images_V10.3.1.0.ODJCNXM_20190401.0000.00_8.1_cn\images
[17:37:24 COM10]:download programmer file: C:\clover_images_V10.3.1.0.ODJCNXM_20190401.0000.00_8.1_cn\images\prog_emmc_firehose_Sdm660_ddr.elf
[17:37:24 COM10]:download programmer C:\clover_images_V10.3.1.0.ODJCNXM_20190401.0000.00_8.1_cn\images\prog_emmc_firehose_Sdm660_ddr.elf
[17:37:35 COM10]:Send done packet
[17:37:35 COM10]:file C:\clover_images_V10.3.1.0.ODJCNXM_20190401.0000.00_8.1_cn\images\prog_emmc_firehose_Sdm660_ddr.elf transferred successfully
[17:37:37 COM10]:send nop command
[17:37:37 COM10]:send command:<?xml version="1.0" ?><data><nop verbose="0" value="ping"/></data>
[17:37:37 COM10]:wait for port open.
[17:37:37 COM10]:wait for port open.
[17:37:37 COM10]:wait for port open.
[17:37:37 COM10]:wait for port open.
[17:37:37 COM10]:wait for port open.
[17:37:37 COM10]:wait for port open.
[17:37:37 COM10]:wait for port open.
[17:37:37 COM10]:wait for port open.
[17:37:37 COM10]:wait for port open.
[17:37:37 COM10]:wait for port open.
[17:37:37 COM10]:wait for port open.
[17:37:37 COM10]:wait for port open.
[17:37:37 COM10]:wait for port open.
[17:37:38 COM10]:wait for port open.
[17:37:38 COM10]:wait for port open.
[17:37:38 COM10]:wait for port open.
[17:37:38 COM10]:wait for port open.
[17:37:38 COM10]:wait for port open.
[17:37:38 COM10]:wait for port open.
[17:37:38 COM10]:wait for port open.
[17:37:38 COM10]:get response from target
[17:37:39 COM10]:no Binary dump
[17:37:39 COM10]:no Binary dump
[17:37:40 COM10]:no Binary dump
[17:37:41 COM10]:no Binary dump
[17:37:41 COM10]:System.Exception: ping target failed
bei XiaoMiFlash.code.bl.SerialPortDevice.ping()
bei XiaoMiFlash.code.bl.SerialPortDevice.XiaomiFlash() bei XiaoMiFlash.code.bl.SerialPortDevice.ping()
bei XiaoMiFlash.code.bl.SerialPortDevice.XiaomiFlash()
[17:37:41 COM10]:no provision exit:COM10
[17:37:41 COM10]:flashSuccess False
[17:37:41 COM10]:isFactory False CheckCPUID False
[17:37:41 COM10]:before:flashSuccess is False set IsUpdate:True set IsDone True
[17:37:41 COM10]:after:flashSuccess is False set IsUpdate:false set IsDone true
Related
I'm trying to port the HTC Vigor RUU to the HTC Droid Incredible, and I'm running into some problems. It flashes fine, but gets stuck at the splash screen on boot, and log cat shows
Code:
- exec '/system/bin/sh' failed: No such file or directory (2) -
I looked at the recovery log (posted here), and it's giving me "no such file or directory" errors for bin. I have looked in other, stable Sense 3.5 roms, and they don't have those binaries either. I have even copied the binaries from an HTC Runnymede port, but no avail. Does anybody know the problem?
Thanks,
dmeadows013
Did you read the recovery log?? It says no space left on device.
The ROM is too big for the device's system partition you are flashing to.. hence certain files were not flashed successfully.
dsixda said:
Did you read the recovery log?? It says no space left on device.
The ROM is too big for the device's system partition you are flashing to.. hence certain files were not flashed successfully.
Click to expand...
Click to collapse
That worked, thanks!
Now though, log cat shows
Code:
- waiting for device -
--------- beginning of /dev/log/main
E/kickstart( 86): === qcks: Aug 5 2011 13:24:04 ===
I/kickstart( 86): -- COMMAND LINE ARGS in order --
I/kickstart( 86): COMPORT1=/dev/ttyHSL1
I/kickstart( 86): COMPORT2=/dev/tty_sdio_00
I/kickstart( 86): PATHTOIMAGES=/vendor/firmware/
I/kickstart( 86): EFSRAW1=/dev/block/mmcblk0p27
I/kickstart( 86): EFSRAW2=/dev/block/mmcblk0p28
I/kickstart( 86): EFSRAW3=/dev/block/mmcblk0p19
I/kickstart( 86): Header1=efs1.mbn
I/kickstart( 86): Header2=efs2.mbn
I/kickstart( 86): Header3=efs3.mbn
E/logwrapper( 93): executing /system/xbin/busybox failed: No such file or directory
I/logwrapper( 71): /system/xbin/busybox terminated by exit(255)
I/kickstart( 86): Option=l, Sub_Option=c
I/kickstart( 86): Testing if port "/dev/mdm" exists
E/kickstart( 86): Couldn't find "/dev/mdm", 1 of 10
E/tund ( 87): sTap open(): No such file or directory
--------- beginning of /dev/log/system
I/tund ( 87): 3LM tund firing up
E/BATT_MAIN( 96): Fail to open /dev/htc_batt
E/kickstart( 86): Couldn't find "/dev/mdm", 2 of 10
E/kickstart( 86): Couldn't find "/dev/mdm", 3 of 10
E/kickstart( 86): Couldn't find "/dev/mdm", 4 of 10
E/kickstart( 86): Couldn't find "/dev/mdm", 5 of 10
E/kickstart( 86): Couldn't find "/dev/mdm", 6 of 10
E/kickstart( 86): Couldn't find "/dev/mdm", 7 of 10
E/kickstart( 86): Couldn't find "/dev/mdm", 8 of 10
E/kickstart( 86): Couldn't find "/dev/mdm", 9 of 10
E/kickstart( 86): Couldn't find "/dev/mdm", 10 of 10
E/kickstart( 86): '/dev/mdm' was not found
E/kickstart( 86): ERROR: Can't bring MDM9K out of reset
E/BATT_MAIN( 127): Fail to open /dev/htc_batt
E/BATT_MAIN( 145): Fail to open /dev/htc_batt
E/BATT_MAIN( 162): Fail to open /dev/htc_batt
E/BATT_MAIN( 179): Fail to open /dev/htc_batt
E/BATT_MAIN( 196): Fail to open /dev/htc_batt
E/BATT_MAIN( 213): Fail to open /dev/htc_batt
E/BATT_MAIN( 230): Fail to open /dev/htc_batt
E/BATT_MAIN( 247): Fail to open /dev/htc_batt
E/BATT_MAIN( 264): Fail to open /dev/htc_batt
E/BATT_MAIN( 281): Fail to open /dev/htc_batt
E/BATT_MAIN( 298): Fail to open /dev/htc_batt
E/BATT_MAIN( 315): Fail to open /dev/htc_batt
E/BATT_MAIN( 334): Fail to open /dev/htc_batt
E/BATT_MAIN( 403): Fail to open /dev/htc_batt
E/BATT_MAIN( 460): Fail to open /dev/htc_batt
E/BATT_MAIN( 517): Fail to open /dev/htc_batt
E/BATT_MAIN( 574): Fail to open /dev/htc_batt
E/BATT_MAIN( 631): Fail to open /dev/htc_batt
E/BATT_MAIN( 684): Fail to open /dev/htc_batt
E/BATT_MAIN( 741): Fail to open /dev/htc_batt
E/BATT_MAIN( 798): Fail to open /dev/htc_batt
E/BATT_MAIN( 855): Fail to open /dev/htc_batt
E/BATT_MAIN( 912): Fail to open /dev/htc_batt
E/BATT_MAIN( 967): Fail to open /dev/htc_batt
Hi people!
I'm building CM12.1 for our Galaxy Core Prime (a.k.a core33g). This phone comes with Spreadtrum SC7730A SoC, so I make a new device tree based on the Galaxy V CM12.1 tree
For now I'm facing this error (see logcat below). Any help would be greatly appreciated
Device tree: https://github.com/koquantam/android_device_samsung_core33g
Logcat:
Code:
--------- beginning of main
I/Netd ( 178): Netd 1.0 starting
I/auditd ( 165): type=1403 audit(0.0:2): policy loaded auid=4294967295 ses=4294967295
W/init ( 137): type=1400 audit(0.0:3): avc: denied { write } for name="blkid.tab" dev="mmcblk0p23" ino=61764 scontext=u:r:init:s0 tcontext=u:object_r:system_file:s0 tclass=file
W/init ( 137): type=1400 audit(0.0:4): avc: denied { write } for name="etc" dev="mmcblk0p23" ino=61441 scontext=u:r:init:s0 tcontext=u:object_r:system_file:s0 tclass=dir
W/init ( 137): type=1400 audit(0.0:5): avc: denied { add_name } for name="blkid.tab-bi7ND7" scontext=u:r:init:s0 tcontext=u:object_r:system_file:s0 tclass=dir
W/init ( 137): type=1400 audit(0.0:6): avc: denied { create } for name="blkid.tab-bi7ND7" scontext=u:r:init:s0 tcontext=u:object_r:system_file:s0 tclass=file
W/init ( 137): type=1400 audit(0.0:7): avc: denied { setattr } for name="blkid.tab-bi7ND7" dev="mmcblk0p23" ino=61768 scontext=u:r:init:s0 tcontext=u:object_r:system_file:s0 tclass=file
W/init ( 137): type=1400 audit(0.0:8): avc: denied { remove_name } for name="blkid.tab.old" dev="mmcblk0p23" ino=61766 scontext=u:r:init:s0 tcontext=u:object_r:system_file:s0 tclass=dir
W/init ( 137): type=1400 audit(0.0:9): avc: denied { unlink } for name="blkid.tab.old" dev="mmcblk0p23" ino=61766 scontext=u:r:init:s0 tcontext=u:object_r:system_file:s0 tclass=file
W/init ( 137): type=1400 audit(0.0:10): avc: denied { link } for name="blkid.tab" dev="mmcblk0p23" ino=61764 scontext=u:r:init:s0 tcontext=u:object_r:system_file:s0 tclass=file
W/logd ( 165): type=1400 audit(0.0:24): avc: denied { syslog_read } for scontext=u:r:init:s0 tcontext=u:r:kernel:s0 tclass=system
E/Netd ( 178): Failed to open /proc/sys/net/ipv6/conf/default/accept_ra_rt_table: No such file or directory
E/Netd ( 178): Failed to open /proc/sys/net/ipv6/conf/ip6tnl0/accept_ra_rt_table: No such file or directory
E/Netd ( 178): Failed to open /proc/sys/net/ipv6/conf/lo/accept_ra_rt_table: No such file or directory
E/Netd ( 178): Failed to open /proc/sys/net/ipv6/conf/p2p0/accept_ra_rt_table: No such file or directory
E/Netd ( 178): Failed to open /proc/sys/net/ipv6/conf/rmnet0/accept_ra_rt_table: No such file or directory
E/Netd ( 178): Failed to open /proc/sys/net/ipv6/conf/rmnet1/accept_ra_rt_table: No such file or directory
E/Netd ( 178): Failed to open /proc/sys/net/ipv6/conf/rmnet2/accept_ra_rt_table: No such file or directory
E/Netd ( 178): Failed to open /proc/sys/net/ipv6/conf/sit0/accept_ra_rt_table: No such file or directory
E/Netd ( 178): Failed to open /proc/sys/net/ipv6/conf/wlan0/accept_ra_rt_table: No such file or directory
W/iptables( 184): type=1400 audit(0.0:25): avc: denied { create } for scontext=u:r:init:s0 tcontext=u:r:init:s0 tclass=rawip_socket
W/iptables( 184): type=1400 audit(0.0:26): avc: denied { getopt } for lport=255 scontext=u:r:init:s0 tcontext=u:r:init:s0 tclass=rawip_socket
W/init ( 188): type=1400 audit(0.0:27): avc: denied { execute_no_trans } for path="/system/bin/debuggerd" dev="mmcblk0p23" ino=30742 scontext=u:r:init:s0 tcontext=u:object_r:debuggerd_exec:s0 tclass=file
E/Netd ( 178): Failed to open /proc/sys/net/ipv6/conf/default/use_optimistic: No such file or directory
E/Netd ( 178): Failed to open /proc/sys/net/ipv6/conf/ip6tnl0/use_optimistic: No such file or directory
E/Netd ( 178): Failed to open /proc/sys/net/ipv6/conf/lo/use_optimistic: No such file or directory
E/Netd ( 178): Failed to open /proc/sys/net/ipv6/conf/p2p0/use_optimistic: No such file or directory
E/Netd ( 178): Failed to open /proc/sys/net/ipv6/conf/rmnet0/use_optimistic: No such file or directory
E/Netd ( 178): Failed to open /proc/sys/net/ipv6/conf/rmnet1/use_optimistic: No such file or directory
E/Netd ( 178): Failed to open /proc/sys/net/ipv6/conf/rmnet2/use_optimistic: No such file or directory
E/Netd ( 178): Failed to open /proc/sys/net/ipv6/conf/sit0/use_optimistic: No such file or directory
E/Netd ( 178): Failed to open /proc/sys/net/ipv6/conf/wlan0/use_optimistic: No such file or directory
I/cm ( 179): ____ _ _ ____ _ _ ____ ____ ____ _ _ _ _ ____ ___
I/lowmemorykiller( 167): Using in-kernel low memory killer interface
W/init ( 197): type=1400 audit(0.0:28): avc: denied { execute_no_trans } for path="/system/bin/sh" dev="mmcblk0p23" ino=30825 scontext=u:r:init:s0 tcontext=u:object_r:shell_exec:s0 tclass=file
--------- beginning of system
I/Vold ( 170): Vold 2.1 (the revenge) firing up
D/Vold ( 170): Volume extSdCard state changing -1 (Initializing) -> 0 (No-Media)
I/Cryptfs ( 170): Check if PFE is activated on Boot
E/Cryptfs ( 170): Bad magic for real block device /dev/block/platform/sprd-sdhci.3/by-name/userdata
E/Cryptfs ( 170): Error getting crypt footer and key
I/cm ( 185): | \_/ |__| |\ | | | | __ |___ |\ | |\/| | | | \
W/init ( 194): type=1400 audit(0.0:29): avc: denied { execute_no_trans } for path="/system/bin/installd" dev="mmcblk0p23" ino=30768 scontext=u:r:init:s0 tcontext=u:object_r:installd_exec:s0 tclass=file
I/DEBUG ( 188): debuggerd: Jun 21 2016 14:14:41
I/auditd ( 187): Starting up
I/audit_log( 187): Previous audit logfile not detected
E/audit_rules( 187): Could not read audit rules /data/misc/audit/audit.rules: No such file or directory
I/installd( 194): installd firing up
E/cutils ( 194): Failed to read /data/.layout_version: No such file or directory
I/cm ( 195): |___ | | | | \| |__| |__] |___ | \| | | |__| |__/
D/installd( 194): Upgrading /data/media for multi-user
I/SELinux ( 194): SELinux: Loaded file_contexts from /file_contexts
D/installd( 194): Upgrading to shared /data/media/obb
D/installd( 194): Upgrading to /data/misc/user directories
W/DirectVolume( 170): Deprecated implied prefix pattern detected, please use '/devices/sprd-sdhci.0/mmc_host/mmc1*' instead
D/Vold ( 170): Volume extSdCard state changing 0 (No-Media) -> 2 (Pending)
D/DirectVolume( 170): DirectVolume::handlePartitionAdded -> MAJOR 179, MINOR 129, PARTN 1
D/Vold ( 170): Volume extSdCard state changing 2 (Pending) -> 1 (Idle-Unmounted)
E/sdcard ( 205): missing packages.list; retrying
I/cm ( 219): Welcome to Android 5.1.1 / CyanogenMod-12.1-20160621-UNOFFICIAL-core33g
I/macloader( 201): WIFI MAC is valid
D/AndroidRuntime( 203): >>>>>> START com.android.internal.os.ZygoteInit uid 0 <<<<<<
D/AndroidRuntime( 203): CheckJNI is OFF
I/art ( 203): option[0]=-Xzygote
I/art ( 203): option[1]=-Xstacktracefile:/data/anr/traces.txt
I/art ( 203): option[2]=exit
I/art ( 203): option[3]=vfprintf
I/art ( 203): option[4]=sensitiveThread
I/art ( 203): option[5]=-verbose:gc
I/art ( 203): option[6]=-Xms12m
I/art ( 203): option[7]=-Xmx256m
I/art ( 203): option[8]=-XX:mainThreadStackSize=24K
I/art ( 203): option[9]=-XX:HeapGrowthLimit=64m
I/art ( 203): option[10]=-XX:HeapMinFree=4m
I/art ( 203): option[11]=-XX:HeapTargetUtilization=0.75
I/art ( 203): option[12]=-agentlib:jdwp=transport=dt_android_adb,suspend=n,server=y
I/art ( 203): option[13]=-Xlockprofthreshold:500
I/art ( 203): option[14]=-Ximage-compiler-option
I/art ( 203): option[15]=--runtime-arg
I/art ( 203): option[16]=-Ximage-compiler-option
I/art ( 203): option[17]=-Xms64m
I/art ( 203): option[18]=-Ximage-compiler-option
I/art ( 203): option[19]=--runtime-arg
I/art ( 203): option[20]=-Ximage-compiler-option
I/art ( 203): option[21]=-Xmx64m
I/art ( 203): option[22]=-Ximage-compiler-option
I/art ( 203): option[23]=--compiler-filter=everything
I/art ( 203): option[24]=-Ximage-compiler-option
I/art ( 203): option[25]=--image-classes=/system/etc/preloaded-classes
I/art ( 203): option[26]=-Xcompiler-option
I/art ( 203): option[27]=--runtime-arg
I/art ( 203): option[28]=-Xcompiler-option
I/art ( 203): option[29]=-Xms64m
I/art ( 203): option[30]=-Xcompiler-option
I/art ( 203): option[31]=--runtime-arg
I/art ( 203): option[32]=-Xcompiler-option
I/art ( 203): option[33]=-Xmx512m
I/art ( 203): option[34]=-Xcompiler-option
I/art ( 203): option[35]=--compiler-filter=speed
I/art ( 203): option[36]=-Xcompiler-option
I/art ( 203): option[37]=--no-watch-dog
I/art ( 203): option[38]=-Duser.language=en
I/art ( 203): option[39]=-Duser.region=GB
I/art ( 203): Pruning dalvik-cache since we are relocating an image and will need to recompile
I/art ( 203): RelocateImage: /system/bin/patchoat --input-image-location=/system/framework/boot.art --output-image-file=/data/dalvik-cache/arm/[email protected]@boot.art --input-oat-location=/system/framework/boot.oat --output-oat-file=/data/dalvik-cache/arm/[email protected]@boot.oat --instruction-set=arm --base-offset-delta=-9170944
V/NatController( 178): runCmd(/system/bin/iptables -F natctrl_FORWARD) res=0
V/NatController( 178): runCmd(/system/bin/iptables -A natctrl_FORWARD -j DROP) res=0
V/NatController( 178): runCmd(/system/bin/iptables -t nat -F natctrl_nat_POSTROUTING) res=0
V/NatController( 178): runCmd(/system/bin/iptables -F natctrl_tether_counters) res=1
V/NatController( 178): runCmd(/system/bin/iptables -X natctrl_tether_counters) res=1
V/NatController( 178): runCmd(/system/bin/iptables -N natctrl_tether_counters) res=0
V/NatController( 178): runCmd(/system/bin/iptables -t mangle -A natctrl_mangle_FORWARD -p tcp --tcp-flags SYN SYN -j TCPMSS --clamp-mss-to-pmtu) res=0
D/MDnsDS ( 178): MDnsSdListener::Hander starting up
D/MDnsDS ( 178): MDnsSdListener starting to monitor
D/MDnsDS ( 178): Going to poll with pollCount 1
E/memtrack( 203): Couldn't load memtrack module (No such file or directory)
E/android.os.Debug( 203): failed to load memtrack module: -2
I/SamplingProfilerIntegration( 203): Profiling disabled.
D/Zygote ( 203): begin preload
I/Zygote ( 203): Preloading classes...
I/art ( 203): Explicit concurrent mark sweep GC freed 800(36KB) AllocSpace objects, 0(0B) LOS objects, 99% free, 44KB/8MB, paused 248us total 14.056ms
I/art ( 203): Counter: 1
I/art ( 203): Explicit concurrent mark sweep GC freed 97(4KB) AllocSpace objects, 0(0B) LOS objects, 99% free, 64KB/8MB, paused 194us total 5.271ms
I/art ( 203): Explicit concurrent mark sweep GC freed 457(29KB) AllocSpace objects, 0(0B) LOS objects, 99% free, 65KB/8MB, paused 206us total 3.228ms
I/art ( 203): Explicit concurrent mark sweep GC freed 5(160B) AllocSpace objects, 0(0B) LOS objects, 99% free, 65KB/8MB, paused 192us total 3.093ms
I/art ( 203): Explicit concurrent mark sweep GC freed 646(41KB) AllocSpace objects, 0(0B) LOS objects, 99% free, 72KB/8MB, paused 204us total 6.678ms
I/art ( 203): Explicit concurrent mark sweep GC freed 5(160B) AllocSpace objects, 0(0B) LOS objects, 99% free, 72KB/8MB, paused 195us total 3.254ms
E/sdcard ( 205): missing packages.list; retrying
I/art ( 203): Explicit concurrent mark sweep GC freed 400(22KB) AllocSpace objects, 0(0B) LOS objects, 98% free, 113KB/8MB, paused 208us total 4.908ms
I/art ( 203): Explicit concurrent mark sweep GC freed 35(1504B) AllocSpace objects, 0(0B) LOS objects, 98% free, 112KB/8MB, paused 197us total 3.411ms
E/Typeface( 203): Error opening /system/etc/fonts.xml
E/Typeface( 203): java.io.FileNotFoundException: /system/etc/fonts.xml: open failed: EACCES (Permission denied)
E/Typeface( 203): at libcore.io.IoBridge.open(IoBridge.java:456)
E/Typeface( 203): at java.io.FileInputStream.<init>(FileInputStream.java:76)
E/Typeface( 203): at android.graphics.FontListParser.parse(FontListParser.java:83)
E/Typeface( 203): at android.graphics.Typeface.init(Typeface.java:372)
E/Typeface( 203): at android.graphics.Typeface.<clinit>(Typeface.java:471)
E/Typeface( 203): at java.lang.Class.classForName(Native Method)
E/Typeface( 203): at java.lang.Class.forName(Class.java:309)
E/Typeface( 203): at java.lang.Class.forName(Class.java:273)
E/Typeface( 203): at com.android.internal.os.ZygoteInit.preloadClasses(ZygoteInit.java:331)
E/Typeface( 203): at com.android.internal.os.ZygoteInit.preload(ZygoteInit.java:256)
E/Typeface( 203): at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:676)
E/Typeface( 203): Caused by: android.system.ErrnoException: open failed: EACCES (Permission denied)
E/Typeface( 203): at libcore.io.Posix.open(Native Method)
E/Typeface( 203): at libcore.io.BlockGuardOs.open(BlockGuardOs.java:186)
E/Typeface( 203): at libcore.io.IoBridge.open(IoBridge.java:442)
E/Typeface( 203): ... 10 more
E/Zygote ( 203): Error preloading android.graphics.Typeface.
E/Zygote ( 203): java.lang.ExceptionInInitializerError
E/Zygote ( 203): at java.lang.Class.classForName(Native Method)
E/Zygote ( 203): at java.lang.Class.forName(Class.java:309)
E/Zygote ( 203): at java.lang.Class.forName(Class.java:273)
E/Zygote ( 203): at com.android.internal.os.ZygoteInit.preloadClasses(ZygoteInit.java:331)
E/Zygote ( 203): at com.android.internal.os.ZygoteInit.preload(ZygoteInit.java:256)
E/Zygote ( 203): at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:676)
E/Zygote ( 203): Caused by: java.lang.NullPointerException: Attempt to read from field 'long android.graphics.Typeface.native_instance' on a null object reference
E/Zygote ( 203): at android.graphics.Typeface.<clinit>(Typeface.java:479)
E/Zygote ( 203): ... 6 more
I/art ( 203): VMRuntime.preloadDexCaches starting
I/art ( 203): VMRuntime.preloadDexCaches strings total=222553 before=36374 after=36374
I/art ( 203): VMRuntime.preloadDexCaches types total=18775 before=6277 after=6288
I/art ( 203): VMRuntime.preloadDexCaches fields total=88754 before=32793 after=32834
I/art ( 203): VMRuntime.preloadDexCaches methods total=156165 before=67616 after=67738
I/art ( 203): VMRuntime.preloadDexCaches finished
I/art ( 203): Counter: 0
D/AndroidRuntime( 203): Shutting down VM
I/Netd ( 460): Netd 1.0 starting
E/Netd ( 460): Failed to open /proc/sys/net/ipv6/conf/default/accept_ra_rt_table: No such file or directory
E/Netd ( 460): Failed to open /proc/sys/net/ipv6/conf/ip6tnl0/accept_ra_rt_table: No such file or directory
E/Netd ( 460): Failed to open /proc/sys/net/ipv6/conf/lo/accept_ra_rt_table: No such file or directory
E/Netd ( 460): Failed to open /proc/sys/net/ipv6/conf/p2p0/accept_ra_rt_table: No such file or directory
E/Netd ( 460): Failed to open /proc/sys/net/ipv6/conf/rmnet0/accept_ra_rt_table: No such file or directory
E/Netd ( 460): Failed to open /proc/sys/net/ipv6/conf/rmnet1/accept_ra_rt_table: No such file or directory
E/Netd ( 460): Failed to open /proc/sys/net/ipv6/conf/rmnet2/accept_ra_rt_table: No such file or directory
E/Netd ( 460): Failed to open /proc/sys/net/ipv6/conf/sit0/accept_ra_rt_table: No such file or directory
E/Netd ( 460): Failed to open /proc/sys/net/ipv6/conf/wlan0/accept_ra_rt_table: No such file or directory
E/Netd ( 460): Failed to open /proc/sys/net/ipv6/conf/default/use_optimistic: No such file or directory
E/Netd ( 460): Failed to open /proc/sys/net/ipv6/conf/ip6tnl0/use_optimistic: No such file or directory
E/Netd ( 460): Failed to open /proc/sys/net/ipv6/conf/lo/use_optimistic: No such file or directory
E/Netd ( 460): Failed to open /proc/sys/net/ipv6/conf/p2p0/use_optimistic: No such file or directory
E/Netd ( 460): Failed to open /proc/sys/net/ipv6/conf/rmnet0/use_optimistic: No such file or directory
E/Netd ( 460): Failed to open /proc/sys/net/ipv6/conf/rmnet1/use_optimistic: No such file or directory
E/Netd ( 460): Failed to open /proc/sys/net/ipv6/conf/rmnet2/use_optimistic: No such file or directory
E/Netd ( 460): Failed to open /proc/sys/net/ipv6/conf/sit0/use_optimistic: No such file or directory
E/Netd ( 460): Failed to open /proc/sys/net/ipv6/conf/wlan0/use_optimistic: No such file or directory
V/NatController( 460): runCmd(/system/bin/iptables -F natctrl_FORWARD) res=0
V/NatController( 460): runCmd(/system/bin/iptables -A natctrl_FORWARD -j DROP) res=0
V/NatController( 460): runCmd(/system/bin/iptables -t nat -F natctrl_nat_POSTROUTING) res=0
V/NatController( 460): runCmd(/system/bin/iptables -F natctrl_tether_counters) res=0
V/NatController( 460): runCmd(/system/bin/iptables -X natctrl_tether_counters) res=0
V/NatController( 460): runCmd(/system/bin/iptables -N natctrl_tether_counters) res=0
V/NatController( 460): runCmd(/system/bin/iptables -t mangle -A natctrl_mangle_FORWARD -p tcp --tcp-flags SYN SYN -j TCPMSS --clamp-mss-to-pmtu) res=0
E/sdcard ( 205): missing packages.list; retrying
I/Netd ( 633): Netd 1.0 starting
E/Netd ( 633): Failed to open /proc/sys/net/ipv6/conf/default/accept_ra_rt_table: No such file or directory
E/Netd ( 633): Failed to open /proc/sys/net/ipv6/conf/ip6tnl0/accept_ra_rt_table: No such file or directory
E/Netd ( 633): Failed to open /proc/sys/net/ipv6/conf/lo/accept_ra_rt_table: No such file or directory
E/Netd ( 633): Failed to open /proc/sys/net/ipv6/conf/p2p0/accept_ra_rt_table: No such file or directory
E/Netd ( 633): Failed to open /proc/sys/net/ipv6/conf/rmnet0/accept_ra_rt_table: No such file or directory
E/Netd ( 633): Failed to open /proc/sys/net/ipv6/conf/rmnet1/accept_ra_rt_table: No such file or directory
E/Netd ( 633): Failed to open /proc/sys/net/ipv6/conf/rmnet2/accept_ra_rt_table: No such file or directory
E/Netd ( 633): Failed to open /proc/sys/net/ipv6/conf/sit0/accept_ra_rt_table: No such file or directory
E/Netd ( 633): Failed to open /proc/sys/net/ipv6/conf/wlan0/accept_ra_rt_table: No such file or directory
E/Netd ( 633): Failed to open /proc/sys/net/ipv6/conf/default/use_optimistic: No such file or directory
E/Netd ( 633): Failed to open /proc/sys/net/ipv6/conf/ip6tnl0/use_optimistic: No such file or directory
E/Netd ( 633): Failed to open /proc/sys/net/ipv6/conf/lo/use_optimistic: No such file or directory
E/Netd ( 633): Failed to open /proc/sys/net/ipv6/conf/p2p0/use_optimistic: No such file or directory
E/Netd ( 633): Failed to open /proc/sys/net/ipv6/conf/rmnet0/use_optimistic: No such file or directory
E/Netd ( 633): Failed to open /proc/sys/net/ipv6/conf/rmnet1/use_optimistic: No such file or directory
E/Netd ( 633): Failed to open /proc/sys/net/ipv6/conf/rmnet2/use_optimistic: No such file or directory
E/Netd ( 633): Failed to open /proc/sys/net/ipv6/conf/sit0/use_optimistic: No such file or directory
E/Netd ( 633): Failed to open /proc/sys/net/ipv6/conf/wlan0/use_optimistic: No such file or directory
E/sdcard ( 205): missing packages.list; retrying
V/NatController( 633): runCmd(/system/bin/iptables -F natctrl_FORWARD) res=0
V/NatController( 633): runCmd(/system/bin/iptables -A natctrl_FORWARD -j DROP) res=0
V/NatController( 633): runCmd(/system/bin/iptables -t nat -F natctrl_nat_POSTROUTING) res=0
V/NatController( 633): runCmd(/system/bin/iptables -F natctrl_tether_counters) res=0
V/NatController( 633): runCmd(/system/bin/iptables -X natctrl_tether_counters) res=0
V/NatController( 633): runCmd(/system/bin/iptables -N natctrl_tether_counters) res=0
V/NatController( 633): runCmd(/system/bin/iptables -t mangle -A natctrl_mangle_FORWARD -p tcp --tcp-flags SYN SYN -j TCPMSS --clamp-mss-to-pmtu) res=0
E/sdcard ( 205): missing packages.list; retrying
I/Netd ( 805): Netd 1.0 starting
E/Netd ( 805): Failed to open /proc/sys/net/ipv6/conf/default/accept_ra_rt_table: No such file or directory
E/Netd ( 805): Failed to open /proc/sys/net/ipv6/conf/ip6tnl0/accept_ra_rt_table: No such file or directory
E/Netd ( 805): Failed to open /proc/sys/net/ipv6/conf/lo/accept_ra_rt_table: No such file or directory
E/Netd ( 805): Failed to open /proc/sys/net/ipv6/conf/p2p0/accept_ra_rt_table: No such file or directory
E/Netd ( 805): Failed to open /proc/sys/net/ipv6/conf/rmnet0/accept_ra_rt_table: No such file or directory
E/Netd ( 805): Failed to open /proc/sys/net/ipv6/conf/rmnet1/accept_ra_rt_table: No such file or directory
E/Netd ( 805): Failed to open /proc/sys/net/ipv6/conf/rmnet2/accept_ra_rt_table: No such file or directory
E/Netd ( 805): Failed to open /proc/sys/net/ipv6/conf/sit0/accept_ra_rt_table: No such file or directory
E/Netd ( 805): Failed to open /proc/sys/net/ipv6/conf/wlan0/accept_ra_rt_table: No such file or directory
E/Netd ( 805): Failed to open /proc/sys/net/ipv6/conf/default/use_optimistic: No such file or directory
E/Netd ( 805): Failed to open /proc/sys/net/ipv6/conf/ip6tnl0/use_optimistic: No such file or directory
E/Netd ( 805): Failed to open /proc/sys/net/ipv6/conf/lo/use_optimistic: No such file or directory
E/Netd ( 805): Failed to open /proc/sys/net/ipv6/conf/p2p0/use_optimistic: No such file or directory
E/Netd ( 805): Failed to open /proc/sys/net/ipv6/conf/rmnet0/use_optimistic: No such file or directory
E/Netd ( 805): Failed to open /proc/sys/net/ipv6/conf/rmnet1/use_optimistic: No such file or directory
E/Netd ( 805): Failed to open /proc/sys/net/ipv6/conf/rmnet2/use_optimistic: No such file or directory
E/Netd ( 805): Failed to open /proc/sys/net/ipv6/conf/sit0/use_optimistic: No such file or directory
E/Netd ( 805): Failed to open /proc/sys/net/ipv6/conf/wlan0/use_optimistic: No such file or directory
V/NatController( 805): runCmd(/system/bin/iptables -F natctrl_FORWARD) res=0
V/NatController( 805): runCmd(/system/bin/iptables -A natctrl_FORWARD -j DROP) res=0
V/NatController( 805): runCmd(/system/bin/iptables -t nat -F natctrl_nat_POSTROUTING) res=0
V/NatController( 805): runCmd(/system/bin/iptables -F natctrl_tether_counters) res=0
V/NatController( 805): runCmd(/system/bin/iptables -X natctrl_tether_counters) res=0
V/NatController( 805): runCmd(/system/bin/iptables -N natctrl_tether_counters) res=0
V/NatController( 805): runCmd(/system/bin/iptables -t mangle -A natctrl_mangle_FORWARD -p tcp --tcp-flags SYN SYN -j TCPMSS --clamp-mss-to-pmtu) res=0
E/sdcard ( 205): missing packages.list; retrying
E/sdcard ( 205): missing packages.list; retrying
I/Netd ( 977): Netd 1.0 starting
E/Netd ( 977): Failed to open /proc/sys/net/ipv6/conf/default/accept_ra_rt_table: No such file or directory
E/Netd ( 977): Failed to open /proc/sys/net/ipv6/conf/ip6tnl0/accept_ra_rt_table: No such file or directory
E/Netd ( 977): Failed to open /proc/sys/net/ipv6/conf/lo/accept_ra_rt_table: No such file or directory
E/Netd ( 977): Failed to open /proc/sys/net/ipv6/conf/p2p0/accept_ra_rt_table: No such file or directory
E/Netd ( 977): Failed to open /proc/sys/net/ipv6/conf/rmnet0/accept_ra_rt_table: No such file or directory
E/Netd ( 977): Failed to open /proc/sys/net/ipv6/conf/rmnet1/accept_ra_rt_table: No such file or directory
E/Netd ( 977): Failed to open /proc/sys/net/ipv6/conf/rmnet2/accept_ra_rt_table: No such file or directory
E/Netd ( 977): Failed to open /proc/sys/net/ipv6/conf/sit0/accept_ra_rt_table: No such file or directory
E/Netd ( 977): Failed to open /proc/sys/net/ipv6/conf/wlan0/accept_ra_rt_table: No such file or directory
E/Netd ( 977): Failed to open /proc/sys/net/ipv6/conf/default/use_optimistic: No such file or directory
E/Netd ( 977): Failed to open /proc/sys/net/ipv6/conf/ip6tnl0/use_optimistic: No such file or directory
E/Netd ( 977): Failed to open /proc/sys/net/ipv6/conf/lo/use_optimistic: No such file or directory
E/Netd ( 977): Failed to open /proc/sys/net/ipv6/conf/p2p0/use_optimistic: No such file or directory
E/Netd ( 977): Failed to open /proc/sys/net/ipv6/conf/rmnet0/use_optimistic: No such file or directory
E/Netd ( 977): Failed to open /proc/sys/net/ipv6/conf/rmnet1/use_optimistic: No such file or directory
E/Netd ( 977): Failed to open /proc/sys/net/ipv6/conf/rmnet2/use_optimistic: No such file or directory
E/Netd ( 977): Failed to open /proc/sys/net/ipv6/conf/sit0/use_optimistic: No such file or directory
E/Netd ( 977): Failed to open /proc/sys/net/ipv6/conf/wlan0/use_optimistic: No such file or directory
V/NatController( 977): runCmd(/system/bin/iptables -F natctrl_FORWARD) res=0
V/NatController( 977): runCmd(/system/bin/iptables -A natctrl_FORWARD -j DROP) res=0
V/NatController( 977): runCmd(/system/bin/iptables -t nat -F natctrl_nat_POSTROUTING) res=0
V/NatController( 977): runCmd(/system/bin/iptables -F natctrl_tether_counters) res=0
V/NatController( 977): runCmd(/system/bin/iptables -X natctrl_tether_counters) res=0
V/NatController( 977): runCmd(/system/bin/iptables -N natctrl_tether_counters) res=0
V/NatController( 977): runCmd(/system/bin/iptables -t mangle -A natctrl_mangle_FORWARD -p tcp --tcp-flags SYN SYN -j TCPMSS --clamp-mss-to-pmtu) res=0
E/audit_log( 187): Error writing to log file
E/audit_log( 187): Error writing to log file
E/audit_log( 187): Error writing to log file
E/audit_log( 187): Error writing to log file
E/audit_log( 187): Error writing to log file
E/audit_log( 187): Error writing to log file
E/audit_log( 187): Error writing to log file
E/audit_log( 187): Error writing to log file
E/audit_log( 187): Error writing to log file
E/audit_log( 187): Error writing to log file
E/audit_log( 187): Error writing to log file
E/audit_log( 187): Error writing to log file
E/audit_log( 187): Error writing to log file
E/audit_log( 187): Error writing to log file
E/audit_log( 187): Error writing to log file
E/audit_log( 187): Error writing to log file
E/audit_log( 187): Error writing to log file
E/audit_log( 187): Error writing to log file
E/audit_log( 187): Error writing to log file
E/audit_log( 187): Error writing to log file
F/appproc ( 1148): Error changing dalvik-cache ownership : Read-only file system
--------- beginning of crash
F/libc ( 1148): Fatal signal 6 (SIGABRT), code -6 in tid 1148 (app_process)
I/DEBUG ( 188): property debug.db.uid not set; NOT waiting for gdb.
I/DEBUG ( 188): HINT: adb shell setprop debug.db.uid 100000
I/DEBUG ( 188): HINT: adb forward tcp:5039 tcp:5039
E/DEBUG ( 188): Failed to find a valid tombstone, default to using tombstone 0.
E/DEBUG ( 188): failed to open tombstone file '/data/tombstones/tombstone_00': No such file or directory
I/DEBUG ( 188): Skipping tombstone write, nothing to do.
E/Netd ( 977): failed to create /data/misc/net/rt_tables (Read-only file system)
D/MDnsDS ( 977): MDnsSdListener::Hander starting up
D/MDnsDS ( 977): MDnsSdListener starting to monitor
D/MDnsDS ( 977): Going to poll with pollCount 1
E/Netd ( 977): Unable to create pid file (Read-only file system)
I am having a Redmi Note 3 (kenzo). I am downgrading MIUI 10 to MIUI 7 with QFIL but when I start to flash, I get QSahara Error.
"Validating Application Configuration
Load APP Configuration
Load ARG Configuration
Validating Download Configuration
Image Search Path: C:\
Process Index:0
Programmer Path:C:\Users\DH\Desktop\Harsh\RedmiN3\kenzo_global_images_6.7.21_20160712.0000.26_5.1_global\images\prog_emmc_firehose_8976_ddr.mbn
Image Search Path: C:\Users\DH\Desktop\Harsh\RedmiN3\kenzo_global_images_6.7.21_20160712.0000.26_5.1_global\images
Image Search Path: C:\Users\DH\Desktop\Harsh\RedmiN3\kenzo_global_images_6.7.21_20160712.0000.26_5.1_global\images
RAWPROGRAM file path: C:\Users\DH\Desktop\Harsh\RedmiN3\kenzo_global_images_6.7.21_20160712.0000.26_5.1_global\images\rawprogram0.xml
PATCH file path:C:\Users\DH\Desktop\Harsh\RedmiN3\kenzo_global_images_6.7.21_20160712.0000.26_5.1_global\images\patch0.xml
Start Download
Program Path:C:\Users\DH\Desktop\Harsh\RedmiN3\kenzo_global_images_6.7.21_20160712.0000.26_5.1_global\images\prog_emmc_firehose_8976_ddr.mbn
***** Working Folder:C:\Users\DH\AppData\Roaming\Qualcomm\QFIL\COMPORT_20
Binary build date: Oct 31 2016 @ 22:51:05
QSAHARASERVER CALLED LIKE THIS: 'C:\Program Files\Qualcomm\QPST\bin\QSaharaServer.ex'Current working dir: C:\Users\DH\AppData\Roaming\Qualcomm\QFIL\COMPORT_20
Sahara mappings:
2: amss.mbn
6: apps.mbn
8: dsp1.mbn
10: dbl.mbn
11: osbl.mbn
12: dsp2.mbn
16: efs1.mbn
17: efs2.mbn
20: efs3.mbn
21: sbl1.mbn
22: sbl2.mbn
23: rpm.mbn
25: tz.mbn
28: dsp3.mbn
29: acdb.mbn
30: wdt.mbn
31: mba.mbn
13: C:\Users\DH\Desktop\Harsh\RedmiN3\kenzo_global_images_6.7.21_20160712.0000.26_5.1_global\images\prog_emmc_firehose_8976_ddr.mbn
23:12:20: ERROR: function: port_connect:100 Failed to open com port handle
23:12:20: ERROR: function: port_connect:100 Failed to open com port handle
23:12:20: ERROR: function: port_connect:100 Failed to open com port handle
23:12:20: ERROR: function: port_connect:100 Failed to open com port handle
23:12:20: ERROR: function: port_connect:100 Failed to open com port handle
23:12:20: ERROR: function: port_connect:100 Failed to open com port handle
23:12:20: ERROR: function: port_connect:100 Failed to open com port handle
23:12:20: ERROR: function: port_connect:100 Failed to open com port handle
23:12:20: ERROR: function: port_connect:100 Failed to open com port handle
23:12:20: ERROR: function: port_connect:100 Failed to open com port handle
23:12:20: ERROR: function: main:297 Could not connect to \\.\COM20
Download Fail:Sahara Fail:QSaharaServer Failrocess fail
Finish Download"
This is the log of QFIL.
Please help me out.
Hi, did you manage to get past the port_connect error here? Having the same issue myself now while trying to re-flash a Lenovo Z6 Lite/Youth.
Hi all,
When flashing rom to my Hisense A6, QFIL can not connect to com port. Initially, it's recognized as com 5; but jumped to com 7 (Qualcomm 9008 driver) when download start. I am stuck here over 8 hours and no clue to proceed.
Please help.
A thousand thanks in advance.
QFIL log:
2020-03-16 00:01:57.257 Validating Application Configuration
2020-03-16 00:01:57.268 Load APP Configuration
2020-03-16 00:01:57.303 COM:0
2020-03-16 00:01:57.303 PBLDOWNLOADPROTOCOL:0
2020-03-16 00:01:57.303 PROGRAMMER:True
2020-03-16 00:01:57.303 PROGRAMMER:\A6\HLTE700T-L1488.6.09.02.00.joygram\prog_emmc_ufs_firehose_Sdm660_ddr_30060000.elf
2020-03-16 00:01:57.303 RESETSAHARASTATEMACHINE:False
2020-03-16 00:01:57.304 SAHARAREADSERIALNO:False
2020-03-16 00:01:57.304 SEARCHPATH:\A6\HLTE700T-L1488.6.09.02.00.joygram
2020-03-16 00:01:57.304 RAWPROGRAM:
2020-03-16 00:01:57.304 rawprogram_joygram.xml
2020-03-16 00:01:57.304 PATCH:
2020-03-16 00:01:57.304 patch0.xml
2020-03-16 00:01:57.304 ACKRAWDATAEVERYNUMPACKETS:False
2020-03-16 00:01:57.304 ACKRAWDATAEVERYNUMPACKETS:100
2020-03-16 00:01:57.304 MAXPAYLOADSIZETOTARGETINBYTES:False
2020-03-16 00:01:57.304 MAXPAYLOADSIZETOTARGETINBYTES:49152
2020-03-16 00:01:57.304 DEVICETYPE:emmc
2020-03-16 00:01:57.304 PLATFORM:8x26
2020-03-16 00:01:57.304 VALIDATIONMODE:0
2020-03-16 00:01:57.304 RESETAFTERDOWNLOAD:False
2020-03-16 00:01:57.304 MAXDIGESTTABLESIZE:8192
2020-03-16 00:01:57.304 SWITCHTOFIREHOSETIMEOUT:30
2020-03-16 00:01:57.304 RESETTIMEOUT:200
2020-03-16 00:01:57.304 RESETDELAYTIME:2
2020-03-16 00:01:57.304 METABUILD:\A6\HLTE700T-L1488.6.09.02.00.joygram\contents.xml
2020-03-16 00:01:57.304 METABUILD:asic
2020-03-16 00:01:57.304 METABUILD:emmc
2020-03-16 00:01:57.304 FLATBUILDPATH:\A6\HLTE700T-L1488.6.09.02.00.joygram
2020-03-16 00:01:57.304 FLATBUILDFORCEOVERRIDE:True
2020-03-16 00:01:57.304 QCNPATH:C:\Temp\00000000.qcn
2020-03-16 00:01:57.305 QCNAUTOBACKUPRESTORE:False
2020-03-16 00:01:57.305 SPCCODE:000000
2020-03-16 00:01:57.305 ENABLEMULTISIM:False
2020-03-16 00:01:57.305 AUTOPRESERVEPARTITIONS:False
2020-03-16 00:01:57.305 PARTITIONPRESERVEMODE:0
2020-03-16 00:01:57.305 PRESERVEDPARTITIONS:0
2020-03-16 00:01:57.305 PRESERVEDPARTITIONS:
2020-03-16 00:01:57.305 ERASEALL:False
2020-03-16 00:01:57.306 Load ARG Configuration
2020-03-16 00:01:57.345 Validating Download Configuration
2020-03-16 00:01:57.347 Search path not exist, ignored: D:\A6\HLTE700T-L1488.6.09.02.00.joygram
2020-03-16 00:01:57.348 Invalid programmer path, ignored: D:\A6\HLTE700T-L1488.6.09.02.00.joygram\prog_emmc_ufs_firehose_Sdm660_ddr_30060000.elf
2020-03-16 00:01:57.352 Fail to load contents.xml: Invalid Path for Meta Build CONTENT XML, ignored: D:\A6\HLTE700T-L1488.6.09.02.00.joygram\contents.xml
2020-03-16 00:01:57.356 Fail to find programmer in contents.xml: Content objects are not initialized. Called Load method first!
2020-03-16 00:01:57.359 Fail to update contents.xml: Content objects are not initialized. Called Load method first!
2020-03-16 00:01:57.360 Invalid Flat Build Path, ignored
2020-03-16 00:01:57.722 Process Index:0
2020-03-16 00:01:57.748 Qualcomm Flash Image Loader (QFIL) 2.0.2.3
2020-03-16 00:02:36.613 Programmer Path:\A6\prog_emmc_ufs_firehose_Sdm660_ddr_30060000.elf
2020-03-16 00:02:36.614 Image Search Path: D:\A6
2020-03-16 00:02:46.418 Image Search Path: D:\A6
2020-03-16 00:02:46.419 RAWPROGRAM file path: D:\A6\rawprogram_joygram.xml
2020-03-16 00:02:46.420 PATCH file path:\A6\patch0.xml
2020-03-16 00:03:21.507 Start Download
2020-03-16 00:03:21.525 COM Port number:5
2020-03-16 00:03:21.635 Switch To EDL
2020-03-16 00:03:26.660 QDLoader port detected
2020-03-16 00:03:26.661 Program Path:\A6\prog_emmc_ufs_firehose_Sdm660_ddr_30060000.elf
2020-03-16 00:03:26.665 ***** Working Folder:C:\Users\EC\AppData\Roaming\Qualcomm\QFIL\COMPORT_7
2020-03-16 00:03:26.727 Binary build date: Apr 27 2018 @ 03:04:33
2020-03-16 00:03:26.728 QSAHARASERVER CALLED LIKE THIS: 'C:\Program Files (x86)\Qualcomm\QPST\bin\QSaharaServer.ex'Current working dir: C:\Users\EC\AppData\Roaming\Qualcomm\QFIL\COMPORT_7
2020-03-16 00:03:26.730 Sahara mappings:
2020-03-16 00:03:26.731 2: amss.mbn
2020-03-16 00:03:26.732 6: apps.mbn
2020-03-16 00:03:26.733 8: dsp1.mbn
2020-03-16 00:03:26.733 10: dbl.mbn
2020-03-16 00:03:26.734 11: osbl.mbn
2020-03-16 00:03:26.735 12: dsp2.mbn
2020-03-16 00:03:26.735 16: efs1.mbn
2020-03-16 00:03:26.736 17: efs2.mbn
2020-03-16 00:03:26.737 20: efs3.mbn
2020-03-16 00:03:26.738 21: sbl1.mbn
2020-03-16 00:03:26.738 22: sbl2.mbn
2020-03-16 00:03:26.739 23: rpm.mbn
2020-03-16 00:03:26.740 25: tz.mbn
2020-03-16 00:03:26.740 28: dsp3.mbn
2020-03-16 00:03:26.741 29: acdb.mbn
2020-03-16 00:03:26.742 30: wdt.mbn
2020-03-16 00:03:26.743 31: mba.mbn
2020-03-16 00:03:26.743 13: D:\A6\prog_emmc_ufs_firehose_Sdm660_ddr_30060000.elf
2020-03-16 00:03:26.744
2020-03-16 00:03:26.745 00:03:26: ERROR: function: port_connect:100 Failed to open com port handle
2020-03-16 00:03:26.746
2020-03-16 00:03:26.747 00:03:26: ERROR: function: port_connect:100 Failed to open com port handle
2020-03-16 00:03:26.747
2020-03-16 00:03:26.748 00:03:26: ERROR: function: port_connect:100 Failed to open com port handle
2020-03-16 00:03:26.749
2020-03-16 00:03:26.749 00:03:26: ERROR: function: port_connect:100 Failed to open com port handle
2020-03-16 00:03:26.750
2020-03-16 00:03:26.751 00:03:26: ERROR: function: port_connect:100 Failed to open com port handle
2020-03-16 00:03:26.752
2020-03-16 00:03:26.753 00:03:26: ERROR: function: port_connect:100 Failed to open com port handle
2020-03-16 00:03:26.757
2020-03-16 00:03:26.758 00:03:26: ERROR: function: port_connect:100 Failed to open com port handle
2020-03-16 00:03:26.759
2020-03-16 00:03:26.759 00:03:26: ERROR: function: port_connect:100 Failed to open com port handle
2020-03-16 00:03:26.759
2020-03-16 00:03:26.760 00:03:26: ERROR: function: port_connect:100 Failed to open com port handle
2020-03-16 00:03:26.761
2020-03-16 00:03:26.762 00:03:26: ERROR: function: port_connect:100 Failed to open com port handle
2020-03-16 00:03:26.762
2020-03-16 00:03:26.763 00:03:26: ERROR: function: main:314 Could not connect to \\.\COM7
2020-03-16 00:03:26.764 Download Fail:Sahara Fail:QSaharaServer Failrocess fail
2020-03-16 00:03:26.765 Finish Download
Edward
Why is this related with Hisense L730 ?
Do you find a way to fix ?
Hi everyone. Help me unbrick phone redmi 5 plus (stuck mi logo). (phone hung up after deleting google play services) I'm getting this error in edl mode.
I tried this roms :
vince_global_images_V9.6.5.0.OEGMIFD_20180817.0000.00_8.1_global_c80e84fe92.tgz
vince_images_V11.0.3.0.OEGCNXM_20191118.0000.00_8.1_cn_102ca14cd7.tgz
vince_global_images_V11.0.2.0.OEGMIXM_20191108.0000.00_8.1_global.tgz
I encountered the problem in the picture. Recovery mode does not open. only edl and fastboot. Locked bootloader.
Thanks in advance to the friends who helped.
https://ibb.co/6gDQk4L
MiFlash20200314 log
Code:
[01:54:58 COM5]:MiFlash 2020.3.14.0
[01:54:58 COM5]:vboytest index:5
[01:54:58 COM5]:flash in thread name:COM5,id:9
[01:54:58 COM5]:sw in images
[01:54:58 COM5]:flash in thread name:COM5,id:9
[01:54:58 COM5]:vboytest do open :
[01:54:58 COM5]: serial port COM5 opend successfully
[01:54:58 COM5]:[COM5]:start flash.
[01:54:58 COM5]:received hello packet
[01:54:58 COM5]:programmertype: 0
[01:54:58 COM5]:vboytest:C:\miui\images
[01:54:58 COM5]:download programmer file: C:\miui\images\prog_emmc_firehose_8953_ddr.mbn
[01:54:58 COM5]:download programmer C:\miui\images\prog_emmc_firehose_8953_ddr.mbn
[01:55:04 COM5]:Send done packet
[01:55:04 COM5]:file C:\miui\images\prog_emmc_firehose_8953_ddr.mbn transferred successfully
[01:55:06 COM5]:send nop command
[01:55:06 COM5]:send command:?xml version="1.0" ?datanop verbose="0" value="ping"//data
[01:55:06 COM5]:get response from target
[01:55:06 COM5]:resdump:?xml version="1.0" encoding="UTF-8" ?dataresponse value="ACK" //data?xml version="1.0" encoding="UTF-8" ?datalog value="[email protected] [email protected]" //data
[01:55:06 COM5]:send configure command
[01:55:06 COM5]:send command:?xml version="1.0" ?dataconfigure verbose="0" AlwaysValidate="0" ZlpAwareHost="1" MaxPayloadSizeToTargetInBytes="131072" MemoryName="emmc" SkipStorageInit="0"//data
[01:55:06 COM5]:get response from target
[01:55:06 COM5]:resdump:?xml version="1.0" encoding="UTF-8" ?datalog value="[email protected] [email protected]" //data?xml version="1.0" encoding="UTF-8" ?dataresponse value="ACK" MinVersionSupported="1" MemoryName="eMMC" MaxPayloadSizeFromTargetInBytes="4096" MaxPayloadSizeToTargetInBytes="131072" MaxPayloadSizeToTargetInBytesSupported="1048576" MaxXMLSizeInBytes="4096" Version="1" TargetName="8953" //data
[01:55:06 COM5]:max buffer sector is 0
[01:55:06 COM5]:open program file C:\miui\images\rawprogram0.xml
[01:55:06 COM5]:Write file C:\miui\images\NON-HLOS.bin to partition[modem] sector 131072
[01:55:06 COM5]:write file legnth 88080384 to partition 131072
[01:55:06 COM5]:program cmd: ?xml version="1.0" ?dataprogram SECTOR_SIZE_IN_BYTES="512" num_partition_sectors="172032" start_sector="131072" physical_partition_number="0" //data
[02:09:52 COM5]:write failed:The port is closed.
[02:09:52 COM5]:write failed:The port is closed.
[02:09:52 COM5]:write failed:The port is closed.
[02:09:52 COM5]:write failed:The port is closed.
[02:09:52 COM5]:write failed:The port is closed.
[02:09:52 COM5]:write failed:The port is closed.
[02:09:52 COM5]:write failed:The port is closed.
[02:09:52 COM5]:error:The operation has timed out.
[02:09:52 COM5]:System.Exception: write time out,maybe device was disconnected.
at XiaoMiFlash.code.bl.SerialPortDevice.WriteFilesToDevice(String portName, String swPath, String rawFilePath)
at XiaoMiFlash.code.bl.SerialPortDevice.FirehoseDownloadImg(String swPath)
at XiaoMiFlash.code.bl.SerialPortDevice.XiaomiFlash() at XiaoMiFlash.code.bl.SerialPortDevice.WriteFilesToDevice(String portName, String swPath, String rawFilePath)
at XiaoMiFlash.code.bl.SerialPortDevice.FirehoseDownloadImg(String swPath)
at XiaoMiFlash.code.bl.SerialPortDevice.XiaomiFlash()
[02:09:52 COM5]:no provision exit:COM5
[02:09:52 COM5]:flashSuccess False
[02:09:52 COM5]:isFactory False CheckCPUID False
[02:09:52 COM5]:before:flashSuccess is False set IsUpdate:True set IsDone True
[02:09:52 COM5]:after:flashSuccess is False set IsUpdate:false set IsDone true
isn't there anyone to help ? I still couldn't solve the problem
Refiq H-ev said:
isn't there anyone to help ? I still couldn't solve the problem
Click to expand...
Click to collapse
I had a similar issue regarding this. For me, unlocking the bootloader and then flashing the same stock rom fixed it. Firstly, unlock your bootloader by using fastboot and the mi unlock software. Then flash vince_global_images_V11.0.2.0.OEGMIXM_20191108.000 0.00_8.1_global.tgz images, select clean and lock(Wiping data + internal storage + relocking bootloader) in the mi flash software. That's it, it will surely work.