bro my phone is stuck on bootloop and it says "download not completed! please press volume + and power key 10s to power off. Then download again ...... error code 0x992566 " bro I REALLY NEED URGENT HELP. NO MATTER WHAT I DO IT KEEPS GOING BACK PLEASE SOMEBODY HELP ME!
LordYama said:
bro my phone is stuck on bootloop and it says "download not completed! please press volume + and power key 10s to power off. Then download again ...... error code 0x992566 " bro I REALLY NEED URGENT HELP. NO MATTER WHAT I DO IT KEEPS GOING BACK PLEASE SOMEBODY HELP ME!
Click to expand...
Click to collapse
How did you run into this? Did you try to flash a ROM that might have not been compatible with Realme 6?
LordYama said:
bro my phone is stuck on bootloop and it says "download not completed! please press volume + and power key 10s to power off. Then download again ...... error code 0x992566 " bro I REALLY NEED URGENT HELP. NO MATTER WHAT I DO IT KEEPS GOING BACK PLEASE SOMEBODY HELP ME!
Click to expand...
Click to collapse
Use the unbrick guide
[GUIDE] UNBRICK/DOWNGRADE YOUR REALME 6/6I(INDIA)/6S USING SPFLASH TOOL FOR FREE!
Hello everyone! So after the new mediatek DAA and SLA protection bypasses you can find github repo of here , using the bypass we are able to use SPFlash Tool, here is a guide how you can do it! This guide is for RMX2001, RMX2002 and RMX2003 ONLY...
forum.xda-developers.com
Related
Hello Folks,
My brother ask me some help to restore his motorola Razor that dont startup anymore.
When we turn it on, we have this error message :
CustomerID error,Contact Dealer
Boot to Suspend/TCMD mode:dead:0007:00000000:000000cc
Click to expand...
Click to collapse
This is how it happens :
1. he install ICS succefully.
2. then he tryed to install JB thru Boot manager with a custom rom unsuccefuly
3. then phone stop to work.
4. i install him cyanogenmod and it works back.
5. then he tell me that he made some test and turn the phone off, and then the phone never starts up again and show this error message.
I've tryed to launch the factory mode with power + volume down, and power + volume up and down but it didn't change anything, it always launch with this error message.
Do you have any idea to get this problem solved ? i wish to set it back on the original updated rom if possible.
Do you think this "dead" message in the error message is critical ?
Thanks a lot for you help, if you have any question don't hesitate to ask.
Best regards
ps : i already read/try this answear on a related topic : http://forum.xda-developers.com/showpost.php?p=25382757&postcount=30 but as i say previously it didn't work.
Um !! This is first tread I'm seeing having this kind of problem but still If ya getting customer id error it means he has error the cid early to install different region fastboot files . I do not know if it is gonna work but power off ya RAZR
Press both vol down and vol up at a time and press power button that ll take ya to the stock recovery. Now go down and and select bptools and press vol up to select it . I hope that may on ya phone
Sent from my XT910 using Tapatalk 2
I have the same error after I unbrick my phone.
If you want boot your phone, try to hold power + vol up + vol down, choose BP tools.
after that you need to install BMM to bypass CID
Further more, I'm looking for how to get back CID to remove this error
teen9xpro said:
I have the same error after I unbrick my phone.
If you want boot your phone, try to hold power + vol up + vol down, choose BP tools.
after that you need to install BMM to bypass CID
Further more, I'm looking for how to get back CID to remove this error
Click to expand...
Click to collapse
Do ya have backup of ya cid . If yes ya can restore it easily with some commands . If not then then always ya need to power on ya phone using bptools
Please hit the thanks :thumbup: if i evet helped ya !!
Thanks guys for your help,
perhaps, as i say further :
I've already tryed to launch the factory mode with power + volume down, and power + volume up and down but it didn't change anything, it always launch with this error message and dont show the factory mode.
Hello guys, sorry to insist but dont you have any other ideas ?
i would really apreciate your help.
best regards
Do ya have backup of ya cid . If yes ya can restore it easily with some commands . If not then then always ya need to power on ya phone using bptools
Click to expand...
Click to collapse
wich command ? i can try i think he has a backup of cid
himselfprod said:
wich command ? i can try i think he has a backup of cid
Click to expand...
Click to collapse
You cannot restore you CID right now.
However can you ask your brother what tests did he do.?
The error isn't critical itself but the thing that you can't boot to recovery is strange.
Also,you sure the vol+ key is working right?
Sent from my XT912 using Tapatalk 2
An apk called cleveriors cwm installer has made my phone unable to access either dmode or recovery it vibrates, flashes dark blue on half the screen for a second then repeats in a loop, attactchin usb without battery makes it vibrate but no reading from pc, please help this has really upset me
Remove battery press power button for 10 seconds then reinsert battery and (voldown +home +power ) to enter download mode and flash new frimware
PLEASE HELP bricked my samsung sm-g357fz
Hello all, I believe that my phone is bricked or half ; does not turn on, is as dead but sometimes comes on the screen and vibrates when I connect via USB and does not enter into download mode flasearlo , moreover when it enters in recovery mode (when you want to) appears in the snowman white , lying on the ground and a red triangle above, also displays the text "without commands". It is new and if is posible helpme with any solution i would be very grateful. Thanks in advance, Salutations
hisham_waleed_karam said:
Remove battery press power button for 10 seconds then reinsert battery and (voldown +home +power ) to enter download mode and flash new frimware
Click to expand...
Click to collapse
I have the same problem but can you help me walk through how to flash new firmware and where do I get the firmware from if you have the link. Please help!
http://samsung-updates.com/device/?id=SM-G357FZ&details=Galaxy_Ace_Style_LTE__SM-G357FZ
patsillah said:
I have the same problem but can you help me walk through how to flash new firmware and where do I get the firmware from if you have the link. Please help!
Click to expand...
Click to collapse
patsillah said:
I have the same problem but can you help me walk through how to flash new firmware and where do I get the firmware from if you have the link. Please help!
Click to expand...
Click to collapse
link of frimwares : http://samsung-updates.com/device/?id=SM-G357FZ&details=Galaxy_Ace_Style_LTE__SM-G357FZ
guide : look at this http://www.droidviews.com/install-stock-firmware-on-samsung-galaxy-devices-using-odin/
Help please ! Thanks
After I Flash stock ROM my phone was bricked and I didn't know how to fix this.. Im currently facing boot loop. The worst is I can't use my volume up button to enter the recovery...
I tried adb but the cmd prints "error: device not found"
please help me... thanks )
ciemlancer said:
Help please ! Thanks
After I Flash stock ROM my phone was bricked and I didn't know how to fix this.. Im currently facing boot loop. The worst is I can't use my volume up button to enter the recovery...
I tried adb but the cmd prints "error: device not found"
please help me... thanks )
Click to expand...
Click to collapse
is there a download mode for your rom?
try with volume down button.
And what's ur device?
Mod Edit: ***EACH USER IS RESPONSIBLE FOR WHAT THEY DO WITH THEIR DEVICE, PLEASE READ THIS ENTIRE THREAD BEFORE ATTEMPTING TO USE THIS TUTORIAL***
I finnaly unbricked my and I want to share this tutorial because other people had the same problem as me.
--THIS GUIDE WILL BE QUICK, JUST SOME ESSENTIAL STEPS--
1.Download all drivers, I mean ALL OF THEM
2.Hold power +Vol down/vol up+ vol down/ vol up, something will work, and be sure it says quallcomm hs-usb something, otherwise unbricking will not work,
3. Download this-- https://drive.google.com/file/d/0B8jgOvQH8xoaSDJ5RTQ2Qi1Ib0U/view
4. Run the program called -- fix brock device And Partations And every thing.bat
5.When it says waiting for device hold power button until it vibrates and it shoud say "reported size............"
THAT'S IT! From now you will have boot logo on your screen, then go to fastboot, install twrp, reinstall rom, etc
Click the "Thanks" button if you appreciate my work!
Thanks!
XTutorials said:
I finnaly unbricked my and I want to share this tutorial because other people had the same problem as me.
--THIS GUIDE WILL BE QUICK, JUST SOME ESSENTIAL STEPS--
1.Download all drivers, I mean ALL OF THEM
2.Hold power +Vol down/vol up+ vol down/ vol up, something will work, and be sure it says quallcomm hs-usb something, otherwise unbricking will not work,
3. Download this-- https://drive.google.com/file/d/0B8jgOvQH8xoaSDJ5RTQ2Qi1Ib0U/view
4. Run the program called -- fix brock device And Partations And every thing.bat
5.When it says waiting for device hold power button until it vibrates and it shoud say "reported size............"
THAT'S IT! From now you will have boot logo on your screen, then go to fastboot, install twrp, reinstall rom, etc
Click the "Thanks" button if you appreciate my work!
Thanks!
Click to expand...
Click to collapse
You making this process unwontedly complicated
Akshay6767 said:
You making this process unwontedly complicated
Click to expand...
Click to collapse
Sorry, will make tutorials "easier", now I bricked again my A6010
Download first driver for Qucom and lenovo..
bricked and bricked again, its normal to us, we learn from our mistakes.. btw what kind of mods u hav done leading to hardbrick?
My phone deadboot total using this method,phone no detect on pc after using this method,any solution bro..help??
Bricked Lenovo A6000
I need help with my totaly bricked Lenovo A6000 (dont event get vibrations after using this method )
Thank you
me too, i have lenovo a6000 with logo but continues restart and vibrate, i did this and now phone is dead. nothing. not even detected on pc... :'(
me too totaly bricked....
no detected with PC, nothing...
Any people have experience what I must doing now?
I don't even have vibrations, how the **** am I supposed to do this?
On top of that, ADB doesn't detect my phone, but it's there in ports.
abhieamhie said:
My phone deadboot total using this method,phone no detect on pc after using this method,any solution bro..help??
Click to expand...
Click to collapse
same issue bro please help my phone is also dead using this method:crying::crying::crying:
Thread Closed, requesting OP re-evaluate the tutorial
Hi sorry to bother you, however I updated my realme gt rmx to global rom as the link https://forum.xda-developers.com/t/realme-gt-5g-tutorial-how-to-convert-your- rom-to-other-region-using-twrp.4350709/ and the fone started correctly, then an android 11 update appeared.
After the installation is finished my cell phone does not turn on and when I connect to the computer the usb sound connects and disconnects....
Can you help me? Please!
Please
Thanks
lreis5945 said:
Hi sorry to bother you, however I updated my realme gt rmx to global rom as the link https://forum.xda-developers.com/t/realme-gt-5g-tutorial-how-to-convert-your- rom-to-other-region-using-twrp.4350709/ and the fone started correctly, then an android 11 update appeared.
After the installation is finished my cell phone does not turn on and when I connect to the computer the usb sound connects and disconnects....
Can you help me? Please!
Please
Thanks
Click to expand...
Click to collapse
did you try to enter to bootloader menu (vol+ and power)
grown_man said:
did you try to enter to bootloader menu (vol+ and power)
Click to expand...
Click to collapse
nops i pay for unbrick but have a question i can not update ?
lreis5945 said:
nops i pay for unbrick but have a question i can not update ?
Click to expand...
Click to collapse
if everything works fine, you can update, just:
if its rooted, you can lose the root if you dont check what you have to do.
if twrp is installed you have to be careful
lreis5945 said:
nops i pay for unbrick but have a question i can not update ?
Click to expand...
Click to collapse
Please please please help me!!! I got the same problem hard bricked phone unlocked bootloader and when I connect to pc it is connecting and disconnecting. What do you done???
you can install oppodrives put the phone in download mode holding volume up, volume down, and off\on at the same time the phone screen will turn off and you can update it by QFIL or msmdowload