Related
Dear All
I'm a new android user, I just get a new A50 from Australia and try to root it. It's successful with z4root and I try to install Thai font to system. Unfortuantely I did wrong by deleting font folder in the system, therefore I can't run the system again. When I power on, it still have only garmin asus android logo and can't use it again. Does anyone please let me know how to restore or resolve this problem, or I have to throw it away? Thank you in advance.
Cheers!
Winext
Android 1.6 or the new 2.1 Eclair update?
It's a new Eclair 2.1 update, is there any solution?
Connect it to your computer via USB cable.
Using ADB, try this:
ADB REBOOT RECOVERY.
If it works, a yellow triangle appears with the green android guy.
Hit the HOME button. A menu appears. Use volume up/down to move through the options. Tap power to select it I beleive.
Reset/wipe to factory is one of the options.
If you need it, ADB is found in the Android SDK.
If that doesn't work, try calling in to Garmin for support.
Sent from my Garminfone using XDA App
Dear Spazmogen
Thank you for your suggestion, but I'm really new with ANDROID.
I downloaded ANDROID SDK and try to install but it dodn't work.
I use Win 7 64bit, do I need another software to run this command.
If possible, please let me know some previous post that already teach for beginner.
Thank you in advance.
Cheers!
Winext
ADB is a command line tool. But you will have to get Android SDK installed on the computer 1st.
Read the instructions for installing the SDK here: http://developer.android.com/sdk/index.html
ADB commands: HERE.
Interesting. I got into the recovery screen using the Quick Boot app,used the home button to show the menu. The arrows and volume buttons move, but can't actually do anything. Probably related to missing files that are reported in the data/cache/recovery folder.
https://www.garminasus.com/en_US/support/eclair/006-B1130-00.update
official 2.1 update came out today for USA GARMINFONES. Not the A50 Nuvifones elsewhere in the world...
Is the update different from the leaked one?
Sent from my Garminfone using XDA App
I am waiting for an answer to that question myself. I have no plans to change from the leaked version Garmin posted in mid-November.
Sent from my Garminfone using XDA App
Apparently someone did a bit comparison and said they matched. Plus, I tried and it told me it was the same version. On the plus side, I messed up my recovery partition and recovered it using the backups I made of each partition after I loaded 2.1 (dump_image). I made img backups and tar backups of all the files in 1.6 (I am anal about backing up). Good thing because 2.1 doesn't come with flash_image.
I can get into fastboot and the driver loads and stuff, but I get no devices listed when I do fastboot devices command. Next stop is Ubuntu
I know it works,just need to know how to get to it. Btw,I tried both the Garmin fastboot and adb drivers as well as adding the device hardware id's into the android drivers and neither worked.
I also need to find out if there is a similar enough kernel that I can use to get a fully functional recovery mode. I did find out that you can use adb just fine in the stock one and it loads a serial driver as well.
any possible way I could get that backup you made? I apparently didnt save my backup to the pc. And currrently I messed up permissions on my Garmin trying to get recovery working. I cant run the update or anything.
I've just stumbled across this forum post from google, I too am need of fixing my phone. All that is faulty is that the recovery mode has been overwritten with an incorrect one. Is it possible to extract the recovery image and reflash it from the optus supplied Android 2.1 006-B1130-00.update file?
Or is there a way of just getting say Rom Manager to work some magic for me?
Yes, it is possible... would be easier if someone could just use dump_image on a phone that has a working recovery mode and root access. I can provide the dump app and instructions.
Where can I get the Optus update, and are you positive recovery works on it? Does it also have working fastboot?
And to the other poster, which partition do you need? Btw, Rom manager has a permission fix mode. I can get you a tar file if it is the system partition or your choice of img or tar for the others.
And to everyone, after updating to 2.1, do a master clear because a lot of 1.6 apps are left over... duplicates.
Also, odexing all apps speeds it up a lot, with the caveat that you have to re-run the odex.sh file (found somewhere here and modified by me to be more thorough) after every app update or you will get force closes.
Oh I just reflashed the update again, and I got my recover menu back!
I'm not sure if i need any help anymore, but thanks for your offer of help merwin.
By working, do you mean that you can get to it with a hardware key combination and can actually select items?
first of all ,i 'm sorry for my english .my a50 is dead too.i also delet font folder and i use the adb command 'adb reboot recovery'.but the error is device not found. and my pohone can not boot .it stop at the android guy . how can i setup the device..Q.......Q......help me ..pls
garmin-asus a50
i have this garmin asus a50 was running 2.1 after installing a few apps.
tried to reboot and now is stuck on android screen.
tried hard reset stuck on android screen with wipe userdata on top
please help!
garmin-asus a50 dead
yoyoset
i think i have the same problem please let me know of any progress
thank you
Hello,
I was asked to forward my problem here so here it goes:
Not a long time ago I bought Asus ME302C FHD 10 and tried to root it. I followed a guide but I can't paste link just now.
Anyhow, the guide told me to flash rooted system image. I did every step correctly except that after i rebooted it, my device got stuck on logo screen, sometimes saying "no command".
I would like to undo that by getting unrooted system image for my device or rather get a working rooted system image. I am not sure about other possibilities as I am not experienced in android rooting or anything related. I do have fastboot up and working.
Thank you a lot in advance.
Edit: I figured out that Asus website has factory system images, however I don't really know which one to use because they all are for different countries and I am not sure what device is mine. Is there a way to check parameters of your device without booting it?
Edit2: I messed with the device more and found out that adb doesn't recognize device, as in, running 'adb devices' nothing gets listed. However, 'fastboot devices' does output my device, not sure where the problem is. Also, firmwares listed on asus website are zipped files and I don't know how to flash them. I tried 'fastboot flash system zippedfile.zip' but it would give me an error.
Solved
After few sleepless nights and loads of browser tabs opened I finally managed to fix my device.
All I needed was to use a different SKU firmware from Asus website. Now I can finally boot it thanks to XDA developers team and their useful information on the forums.
Hi all,
I recently got a new Dell Venue 7 3740 (yeah, not my first choice, but it was free for buying a computer). Anyway, started reading up on how to root the thing. I have a couple of apps that require root.
I found this thread: http://forum.xda-developers.com/dell-venue/development/guide-how-to-root-android-4-4-4-dell-t2918427
and also the main Dell page: http://opensource.dell.com/releases/Venue_7_3740_Merrifield/developer-edition/
Following Dell's guide to rooting appears to NOT root it. Installing Root Checker confirms I don't have root. Unbricked it and got it back up from 4.4.2 to 4.4.4. By reading the first guide for the 3840, my question is ...
Is the boot image linked there compatible with my 3740?
(yeah, I know this should be in the developer section ... unfortunately I don't have enough posts ... also, I am familiar with rooting/flashing/etc, my first device that I put CM7 on was the original Galaxy S1 ... and I have CM10 on my S3.)
Tried, failed
Yeah I got this tablet with a PC too and tried rooting. It FUBAR'd on me and I had to wrestle with unbricking it. Which sorry to say is a job and a half, the images on Dell's site are corrupt for this WiFi only version (no partition.tbl file, system image incomplete). Ending up downloading the LTE versions firmware to get the missing files and rewriting the batch as the file names for the fastboot commands were wrong too. And even then the tablet wouldn't boot, so I had to store the OTA on an SD card and use recovery to flash it. Unfortunately that leaves me with 4.4.2 and the dreaded clock and browser issues. And OTA doesn't work, it keeps saying no updates are available. Spoke with a Dell rep who said OTAs were suspended and to try again in a week but I think OTA was broken for me when I tried rooting and boot loader was unlocked (which the PDF on Dell's site warns you about).
So now I have a working tablet that skips hours ahead and has general stability issues.
reaper-death said:
Yeah I got this tablet with a PC too and tried rooting. It FUBAR'd on me and I had to wrestle with unbricking it. Which sorry to say is a job and a half, the images on Dell's site are corrupt for this WiFi only version (no partition.tbl file, system image incomplete). Ending up downloading the LTE versions firmware to get the missing files and rewriting the batch as the file names for the fastboot commands were wrong too. And even then the tablet wouldn't boot, so I had to store the OTA on an SD card and use recovery to flash it. Unfortunately that leaves me with 4.4.2 and the dreaded clock and browser issues. And OTA doesn't work, it keeps saying no updates are available. Spoke with a Dell rep who said OTAs were suspended and to try again in a week but I think OTA was broken for me when I tried rooting and boot loader was unlocked (which the PDF on Dell's site warns you about).
So now I have a working tablet that skips hours ahead and has general stability issues.
Click to expand...
Click to collapse
Hmm ... Interestingly enough, I ran through the unbrick procedure from Dell, and didn't have any issues with it whatsoever. I'm not sure if they updated the TGZ since you updated.
I have read that root is for ADB to start with. Can anyone confirm this? If so, then which package could I get for a superuser binary?
ProfM2 said:
Hmm ... Interestingly enough, I ran through the unbrick procedure from Dell, and didn't have any issues with it whatsoever. I'm not sure if they updated the TGZ since you updated.
I have read that root is for ADB to start with. Can anyone confirm this? If so, then which package could I get for a superuser binary?
Click to expand...
Click to collapse
I did this process just a couple days ago so everything I pulled from opensource.dell was current. The unbrick tgz on the site shows up as 128mb for the wifi only A1195 and the A5195 shows as 821mb (odd). When I extracted the tgz it said "unexpected end" or something like that on the system image. Then again when I extracted from that extracted tgz.
Following the root process initially worked and the temp cwm recovery let me flash the supersu update. It booted with su just fine and I tried a couple apps that needed root and they worked. Once I rebooted again the tablet showed up with a USB icon and would go no further. Never having dealt with Intel SoC drivers it took me a while to get them installed properly, and then I eventually understood what "full power off" meant lol.
Do you know how I can relock the bootloader and get OTA working again, assuming I'm already on 4.4.2 from the OTA zip installed via recovery?
Thanks.
reaper-death said:
I did this process just a couple days ago so everything I pulled from opensource.dell was current. The unbrick tgz on the site shows up as 128mb for the wifi only A1195 and the A5195 shows as 821mb (odd). When I extracted the tgz it said "unexpected end" or something like that on the system image. Then again when I extracted from that extracted tgz.
Following the root process initially worked and the temp cwm recovery let me flash the supersu update. It booted with su just fine and I tried a couple apps that needed root and they worked. Once I rebooted again the tablet showed up with a USB icon and would go no further. Never having dealt with Intel SoC drivers it took me a while to get them installed properly, and then I eventually understood what "full power off" meant lol.
Do you know how I can relock the bootloader and get OTA working again, assuming I'm already on 4.4.2 from the OTA zip installed via recovery?
Thanks.
Click to expand...
Click to collapse
You better redo the unbrick procces cause as you are now, you won't be able to update your tablet and 4.4.2 has some issues with the clock and browser. The best way to root is by thetered cwm, I did it and it's working great.
reaper-death said:
I did this process just a couple days ago so everything I pulled from opensource.dell was current. The unbrick tgz on the site shows up as 128mb for the wifi only A1195 and the A5195 shows as 821mb (odd). When I extracted the tgz it said "unexpected end" or something like that on the system image. Then again when I extracted from that extracted tgz.
Click to expand...
Click to collapse
This is quite odd. From the documentation, it appears that the A195 is for the LTE version, and the A150 is Wifi only. Since I have the 3740 Wifi only, I only pulled the A150 version.
The Unbricking process was very straightforward and everything went smoothly, and after it rebooted, it prompted that there was a system update from Dell, and that took me from the 4.4.2 from the TGZ, to 4.4.4
ProfM2 said:
This is quite odd. From the documentation, it appears that the A195 is for the LTE version, and the A150 is Wifi only. Since I have the 3740 Wifi only, I only pulled the A150 version.
The Unbricking process was very straightforward and everything went smoothly, and after it rebooted, it prompted that there was a system update from Dell, and that took me from the 4.4.2 from the TGZ, to 4.4.4
Click to expand...
Click to collapse
http://opensource.dell.com/releases/Venue_7_3740_Merrifield/developer-edition/Doc/OSS_A150&A195.pdf
* For Wifi-only device on A150 and Wifi / LTE device on A195
I see it now, I think I was misinterpreting the above statement which means I've been flashing the A195 rom this whole time. Thank you all for your help! :good:
After getting my 3740 back to "Unbricked" mode, and OTA upgraded to 4.4.4, it appears that I'm completely locked out of the rooting process.
I've tried to start over with the Dell info (unlocking bootloader), however, neither of my PC's will detect the tablet when using xFSTK (one PC - Win8.1-64bit, other XP-32bit). The tablet IS detected, however, it appears that the drivers are no longer correct(?).
I normally run Ubuntu, and thats where my Android development setup is on ... I see that xFSTK is available for Linux ... has anyone used it? or would I be better trying to fight Windows?
ProfM2 said:
After getting my 3740 back to "Unbricked" mode, and OTA upgraded to 4.4.4, it appears that I'm completely locked out of the rooting process.
I've tried to start over with the Dell info (unlocking bootloader), however, neither of my PC's will detect the tablet when using xFSTK (one PC - Win8.1-64bit, other XP-32bit). The tablet IS detected, however, it appears that the drivers are no longer correct(?).
I normally run Ubuntu, and thats where my Android development setup is on ... I see that xFSTK is available for Linux ... has anyone used it? or would I be better trying to fight Windows?
Click to expand...
Click to collapse
It is mentioned somewhere that the 3740 and the 3840 use the same firmware. Assuming that, what you can do is download the latest SuperUser zip, copy it to the internal or external storage, then use THIS, or THIS to root through CWM.
graphdarnell said:
It is mentioned somewhere that the 3740 and the 3840 use the same firmware.
Click to expand...
Click to collapse
Hmmm ... I took this to mean that I could use the same boot.img as the Venue 8, and tried the process from this thread: http://forum.xda-developers.com/dell-venue/development/guide-how-to-root-android-4-4-4-dell-t2918427
NOPE. (Don't try, it'll cause the tablet to go into the "help my androids' fallen and can't get up" icon. )
ProfM2 said:
Hmmm ... I took this to mean that I could use the same boot.img as the Venue 8, and tried the process from this thread: http://forum.xda-developers.com/dell-venue/development/guide-how-to-root-android-4-4-4-dell-t2918427
NOPE. (Don't try, it'll cause the tablet to go into the "help my androids' fallen and can't get up" icon. )
Click to expand...
Click to collapse
I'm curious as to what it is you're trying to do. Why do you insist on having a developer's root (just the use of ADB shell), as opposed to full root flashing SuperSu from custom recovery?
graphdarnell said:
I'm curious as to what it is you're trying to do. Why do you insist on having a developer's root (just the use of ADB shell), as opposed to full root flashing SuperSu from custom recovery?
Click to expand...
Click to collapse
I just want full root.
Most of the info that I've read on here and elsewhere are geared to the 3830/3840. Not as much for the 3740. So, by playing with the device and learning what works/doesn't work, possibly others may find this info useful to them.
I've been having issues seeing the device from XP, Win8.1 and Ubuntu, in the 'off' state of the tablet, when the PC should be seeing the merrifield. Just this morning, after bricking it last night, I discovered that my PC seems to see the device right away if I press Vol+ while plugging in the microUSB. (again, something that may help someone else) I was planning on double checking this info later today, to make sure that it wasn't a fluke.
I do appreciate both of the links that you've posted in this thread, and I will check them out. Of course, both are labelled for the Venue 8, not the Venue 7 that I have. Since I've gained knowledge on the unbrick process I feel more comfortable trying them.
I've installed (or tried to install) SuperSU from the Play store, but it didn't appear to help much, since I didn't have the custom recovery setup at that time. I'll work on that tonight.
ProfM2 said:
I just want full root.
Most of the info that I've read on here and elsewhere are geared to the 3830/3840. Not as much for the 3740. So, by playing with the device and learning what works/doesn't work, possibly others may find this info useful to them.
I've been having issues seeing the device from XP, Win8.1 and Ubuntu, in the 'off' state of the tablet, when the PC should be seeing the merrifield. Just this morning, after bricking it last night, I discovered that my PC seems to see the device right away if I press Vol+ while plugging in the microUSB. (again, something that may help someone else) I was planning on double checking this info later today, to make sure that it wasn't a fluke.
I do appreciate both of the links that you've posted in this thread, and I will check them out. Of course, both are labelled for the Venue 8, not the Venue 7 that I have. Since I've gained knowledge on the unbrick process I feel more comfortable trying them.
I've installed (or tried to install) SuperSU from the Play store, but it didn't appear to help much, since I didn't have the custom recovery setup at that time. I'll work on that tonight.
Click to expand...
Click to collapse
A quick word on getting the device recognized in off mode, what worked for me was it needs to be completely powered off and nothing showing on the tablet screen then connect and bring up the device manager. Whatever shows up needs to be "Intel SoC" so change the driver to that if needed. When flashing firmware to unlock the bootloader the device's boot screen will show an "Intel Inside" logo instead of the normal "Dell" logo. I ended up running xFSTK commands in advance (they'll wait) and then running over to hook up the tablet (powered off) via USB as for some reason it'll show up and then I hear "da-Dunk" in Windows (device disconnected) after a short while which interrupts the process (same with fastboot commands). This was the unbrick process in a nutshell for me and I'm leaving it now as is (OTA'd to 4.4.4) until hopefully the supposed update to Lollipop comes around and maybe some progress is made on rooting it.
Hope this helps you!
reaper-death said:
A quick word on getting the device recognized in off mode, what worked for me was it needs to be completely powered off and nothing showing on the tablet screen then connect and bring up the device manager. Whatever shows up needs to be "Intel SoC" so change the driver to that if needed. When flashing firmware to unlock the bootloader the device's boot screen will show an "Intel Inside" logo instead of the normal "Dell" logo. I ended up running xFSTK commands in advance (they'll wait) and then running over to hook up the tablet (powered off) via USB as for some reason it'll show up and then I hear "da-Dunk" in Windows (device disconnected) after a short while which interrupts the process (same with fastboot commands). This was the unbrick process in a nutshell for me and I'm leaving it now as is (OTA'd to 4.4.4) until hopefully the supposed update to Lollipop comes around and maybe some progress is made on rooting it.
Hope this helps you!
Click to expand...
Click to collapse
I have finally settled down and got the tablet rooted. What's really odd, was Win8.1 kept losing the proper driver. I'm not sure exactly why ... but suffice it to say, I got it working. It did appear to be more stable when I hit the Vol+ and plugged in the USB, but then again it may have been a coincidence.
Open source dell
If you follow the link to dell open source, they do have a detailed PDF download for unlocking the boot loader etc. The file was too large for me to upload on XDA. I just found it today while I was researching how to root this tablet. I have not had a chance to try it yet.
http://opensource.dell.com/
That doesnt work for 3740 lte. I;ve done everything that was in PDF. OTA image should be with unlocker bootloader and root but its not. ;/
Its adb root not su big difference
Does anyone have any idea to root dell venue 7 3740 lte
The open source is for venue 7 3740 wifi
how can i hard reset this device please tell me.
Mahisasur said:
how can i hard reset this device please tell me.
Click to expand...
Click to collapse
Reset any android tbalet with ...
Setting >>>>> Backup & Reset >>>>> Factory Data Reset >>>>> Reset Tablet >>> Erase Everything
Welcome to the comprehensive guide on rooting and unbricking your precious TF103C!
Some words of wisdom and truth
You will most likely be here because, you know, your device is bricked.
First of all, I would like to say that none of the downloadable links are made by me. I happened to find them laying around XDA after looking for a solution for a long time.
Skip this if you don't want to know the reason behind this thread
I got this device a while back (my guess is 4 months), and loved it from the start. Rooted it, of course, and soon after, it didn't want to boot anymore.
As there isn't much development going on (due to the locked bootloader), it's hard to find a solution for bricking. While scrolling, I came upon a post from member gouster3, which came to the solution below. I myself have used this successfully, and have my tablet back. In my opinion, also on rooting, there was no dedicated thread available that really explained the steps to root the device, so as a thank you to the guys who got my tablet fixed, here it is!
The rooting process
The rooting of this tablet is quite easy, really! I'll explain in a few simple steps.
Head into settings > security > then turn on unknown sources
Download the Rootzenfone .apk file. get it here
Install the app (if it is still in your notification bar you can just press the downloaded file, or you can navigate to it's location to install from there)
Turn on airplane mode before you open the app
Open the app, and hit "OK, I know, please root!" (when you press this, a number of screens and a popup will show, ignore those)
5 seconds after pressing, restart your tablet.
Hooray! You are now rooted!
Unbricking your device
Luckily, unbricking is almost as easy as rooting the phone, if you know the steps you have to follow. Here's what you could do (it worked for me) if you still have acces to DROIDboot.
As always, install the adb drivers first! get it here
# You can also make sure the correct driver is installed when plugging in the device in DROIDboot mode. In you device manager it should show up as Android Debug Bridge#
Download these files, containing a clean system. get it here
Make sure the device is turned off, and the battery is at least 50% (just to ensure a complete flash before your battery runs out)
Hold volume+ and power untill the asus screen pops up, then release the power button.
Plug in the tablet to your pc (usb cable) when DROIDboot has been loaded.
Open the downloaded folder, and find 'update_image.bat'
Right click the .bat file, and choose 'run as administrator'
A CMD screen should open on your PC indicating the flashing status. All you have to do now (assuming that it works as intended) is wait untill the process is completed.
Your tablet will reboot automatically when the process is done.
That's it! the 2 things that keep this tablet alive. I would like to send a thanks to the members who were so kind to help me out on this.
gouster3, for providing the link to the unbrick solution
Eclipse00, for giving the link to the rootzenfone apk
Monki, for giving me a clean system.img and putting effort into getting my tablet running again
To all of you, thanks!
It works on my TF103CX too. (it is same hardware).
When i bricked my TF103CX, i had around 80% of battery, but i was not able to charge,
so be careful when bricking. Always do interventions to system with full battery.
//I think, we need add our TF103C to xda device list. it will be nice.
I heared that using Intel Manufacting Tool we can get UEFI instead of Droidboot, and boot Ubuntu/Windows on IntelBay tablets. I found guide for Teclast: http://forum.xda-developers.com/android/general/teclast-x98-air-3g-tablet-9-7-2048x1536-t2913035 But i cannot find any UEFI fot TF103C. I dont want to full brick m device with trying flash it.
Here is original thread in russian language.
Thanks
Thanks for helping me rescue my tablet. Much appreciated
Could anyone please confirm if the rooting method may be used on the TF103CG (K018) model? Or in general is the app able to root any device that is anyhow Zen-related?
this don´t work if you have lillipop on tf103c, the droidboot don´t load, You only get Fasboot starting and nothing more...
i want the raw lollipop image ( system.img ) for tf103c
will this essentially work as a factory reset? mine touch isn't working; and i just want to nuke all my data off the device
Hello all, I just ordered a TF0310C (Best Buy exclusive) from woot.com which will be here tomorrow and the closest thing I can find information on is the TF103C (both are Intel processors), and just trying to find as much info on it as I can. I was unable to find any roms or anything for the TF0310c, will things from the TF103C work on the TF0310C such as rooting or custom recovery at least?
http://computers.woot.com/offers/asus-transformer-pad-10-1-android-tablet-1
Unbrick not working on tf103c running KK. It looked like it was doing something, but no luck. Any common troubleshooting tips?
m374llic4 said:
Will things from the TF103C work on the TF0310C such as rooting or custom recovery at least?
http://computers.woot.com/offers/asus-transformer-pad-10-1-android-tablet-1
Click to expand...
Click to collapse
I know its a bit late, but perhaps better than never. I'd say those devices are identical, but somehow there is a weird naming mixup. Here are the official ASUS pages for them:
http://www.asus.com/supportonly/ASUS Transformer Pad TF0310C/HelpDesk/
https://www.asus.com/Tablets/ASUS_Transformer_Pad_TF103C/specifications/
Whatever you do on the first link, it will be eventually redirected to somewhere that belongs to the second. Their specifications are also basically the same. This is still a guessing game tough, so the best would be to compare 2 build properties, partition tables etc. of those devices to know more.
Rooting will most likely work, Zenroot should do it regardless of device type.
hello,
i have tried different way to unbrick my tf103c, but none is working
i have access to fastboot
i successfully run your bat file to copy the image, but after it reboot and stays on the "asus" logo
if i launch the command after modified the name of the "AS-TF103C-v67.43-capsule.bin" into "capsule.bin", it reboot then a blue progress bar is showing, when the bar is complete the tab reboots, but again it stays on the "asus" logo :'(
do you have any advise ?
Same issue
Hello,
I have the same issue with my tf103c ; i was trying to apply a new update from asus support (to get android 5).
It didn't work and in addition to that, my device results to be bricked.
I have successfully run the bat file, but then i get stuck at Asus logo and device never boot...
Icarolo did you manage to solve your issue ? Is someone really succeed in unbrick tf103c device ?
Thank you in advance
Dead
Hi! I have an asus tf103c and i rooted it with the rootzenfone.apk but now it doesn't turn on at all. after i pressed okay, waited about 15 sec and then i restarted it, but it just turned off. And now it's dead. What should i do?
ASUS K010 (TF103C). I forgot how to enter Recovery
Hello everyone, I have an ASUS K010 (TF103C). The complete model is TF103C-MB1-BLK-DK.
I forgot how to enter Recovery. My Asus is bricked. I know it is possible to enter the recovery because a few months ago I entered and also enter droidboot mode. On that occasion I discovered pressing the buttons energy, volume +, volume - somehow, because I did not work the methods that were in different sites websites, but now I do not remember the exact way of pressing the buttons. I tried many methods but they do not work, only the "Asus looking for incredible" logo appears. The battery has a charge (I charge it manually).
If someone has this same model and knows how to enter the recovery would greatly appreciate it.:good:
I think you can enter the droidboot menu by pressing Volume Up + Power for several secondes.
i dont have acces to DROIDboot.
How can unbrick my tf103c.. thanks
i dont have acces to DROIDboot.
How can unbrick my tf103c.. thanks
Brick3d said:
Welcome to the comprehensive guide on rooting and unbricking your precious TF103C!
Some words of wisdom and truth
You will most likely be here because, you know, your device is bricked.
First of all, I would like to say that none of the downloadable links are made by me. I happened to find them laying around XDA after looking for a solution for a long time.
Skip this if you don't want to know the reason behind this thread
I got this device a while back (my guess is 4 months), and loved it from the start. Rooted it, of course, and soon after, it didn't want to boot anymore.
As there isn't much development going on (due to the locked bootloader), it's hard to find a solution for bricking. While scrolling, I came upon a post from member gouster3, which came to the solution below. I myself have used this successfully, and have my tablet back. In my opinion, also on rooting, there was no dedicated thread available that really explained the steps to root the device, so as a thank you to the guys who got my tablet fixed, here it is!
The rooting process
The rooting of this tablet is quite easy, really! I'll explain in a few simple steps.
Head into settings > security > then turn on unknown sources
Download the Rootzenfone .apk file. get it here
Install the app (if it is still in your notification bar you can just press the downloaded file, or you can navigate to it's location to install from there)
Turn on airplane mode before you open the app
Open the app, and hit "OK, I know, please root!" (when you press this, a number of screens and a popup will show, ignore those)
5 seconds after pressing, restart your tablet.
Hooray! You are now rooted!
Unbricking your device
Luckily, unbricking is almost as easy as rooting the phone, if you know the steps you have to follow. Here's what you could do (it worked for me) if you still have acces to DROIDboot.
As always, install the adb drivers first! get it here
# You can also make sure the correct driver is installed when plugging in the device in DROIDboot mode. In you device manager it should show up as Android Debug Bridge#
Download these files, containing a clean system. get it here
Make sure the device is turned off, and the battery is at least 50% (just to ensure a complete flash before your battery runs out)
Hold volume+ and power untill the asus screen pops up, then release the power button.
Plug in the tablet to your pc (usb cable) when DROIDboot has been loaded.
Open the downloaded folder, and find 'update_image.bat'
Right click the .bat file, and choose 'run as administrator'
A CMD screen should open on your PC indicating the flashing status. All you have to do now (assuming that it works as intended) is wait untill the process is completed.
Your tablet will reboot automatically when the process is done.
That's it! the 2 things that keep this tablet alive. I would like to send a thanks to the members who were so kind to help me out on this.
gouster3, for providing the link to the unbrick solution
Eclipse00, for giving the link to the rootzenfone apk
Monki, for giving me a clean system.img and putting effort into getting my tablet running again
To all of you, thanks!
Click to expand...
Click to collapse
Hi, I see that the thread is old, but I need to fix my old pad. I can do all the steps, but the problem is that I can not find a clean system I can install. I will really appreciate if someone could give me a link to one.
Unbricking tf103c
Hello,
Is it possible to unbrick somehow a device like mine. I dont have either bootloader or recovery or anything (I have two same tablets) and I mess one up. After new update touch screen stopped working so I installed something (I dont remember) i installed new recovery and then tried to install new rom...Every time I power it on (doesnt matter standar od with combos it just show asus logo in search of incredible and that's it. I managed if I press both VOL - and VOL + AND PWRBTN I get something in device manager "Unknown USB Device (Device Descriptor Request Failed)"! Is there anything I can do?
I'll try to get as straight tot he point as possible.
Been using my Mobile one touch pix 7 for a little over a year and always installed Ota updates. Well I rooted the tablet not too long ago, forgot which method I used, but was working fine.
an Ota update came through and totally forgot it was rooted, and tried to install it, at which point the whole tablet got bricked.
It ended up in recovery, and I selected due to failure, to format and wipe the data.
Anyhow, The unit will stay at the boot screen for a while then show command error and then show the recovery screen, my only options are:
reboot
update from sd card
update via adb
update via memory
reboot Bootloader
power off
Well I've tried updating by downloading system images via adb, they return a verification error.
I've tried using adb side load to try to install an Ota update file I found for it, returns a verification error.
I cannot get into download mode, fast boot mode I think does not work as windows reports 3 android devices, but the mobile update software cannot see anything, and fast boot gets stuck at waiting for devices.
I suspect the tablet is for lack of a better description totally bricked and just a paperweight.
I am at a loss of what to try from this point. I'm sure wiping the data after the failed update killed it completely but not sure.
Anyone have any guidance here? I've downloaded a few images from the web I found that say they are for this tablet model, but still getting verification error.
Is there any flashing software I can get that may be able to access the tablet or can I copy a file to the scared and have it try to run an update from there. I don't care if it is rooted or not, just want to get it usable again.
I can run Mac OS, windows 10, windows 7, windows xp, or even have no issue getting a linux version going, whatever will work best for this I can use it. windows 10 I was able to manually add the drivers but windows 7 is not letting me do it the same way. I can connect via adb sideload only, no other adb functions seem to work.
I'm not a total news when it comes to custom rooms, as I have done it with another tablet, and an android car radio, but those were pretty straight forward and bootable so never ran into a brick issue yet.
I have a feeling this is toast and I hope that is not the case.
If anyone here can help out, I would appreciate it.
Thanks again....
Need help here to. Been searching with no luck. Any my issue is.
Rooted kingroot, flashed twrp with flashify and now I'm stuck on twrp. Been searching for any custom stock rom. I forgot to unlock the bootloader but I did enable usb debugging (i didn't see any oem options).
Any k 28532Jonsunf of help would be greatly appreciated.
This sorta happen to me. I rooted pixi 7 with kingroot, and was able to delete a lot of bloatware. However, when I was using lucky patcher it pretty much messed up the play store. But it was fine. I could download stuff through the Internet. But sooner or later I needed to fix it. Tryed a lot of ways but it didn't help. So I factory reset the tabletand now im stuck at the Setup Wizard. It just won't let me let me through. I thought its was over, but then I get a message saying there is an update available. So I download it and installed it. But all I get at the end is error. So now I need to flash it with stock. I tried the img. too, but it doesnt show up in the recover menu. If you found a solution please tell me
Can anyoonneee help me find a good Custom Rom for the alcatel one touch pixi 7 (9006W)? Sucks that there's not much info for this device (probably cause the device sucks lol) I'm running on lollipop 5.0.2 and am not able to get OTA update due to rooting. Unrooting didn't help. It seems only answer is custom rom but don't want to risk bricking it as I don't have a computer at home. Also, I am new to this so if anyone can share some insight, I'd be eternally grateful
P.s
It's a t mobile device but I only use it on wifi.
Am using kingroot.
Have never installed a custom rom
****ing device is 8 gigs. 1 gig Ram.
Is it possible to get Nougat?
Help meeee lol