I bought this phone second hand and I can't seem to find firmwares of this specific model, would love to know if I can crossflash without any problems?
Rko4A-GE said:
I bought this phone second hand and I can't seem to find firmwares of this specific model, would love to know if I can crossflash without any problems?
Click to expand...
Click to collapse
Hi, Not without problems, still fighting with it. Actually crossflash has happened but there are issues now. Is there any chance that you could prepare a dump of your version? It would be helpful for extract the boot.img from it.
I can crossflash at&t variant to EA with the help of firehose. Could you share a back up of your modem_a partition? I want to see what carrier is supported in the this variant.
I can not reach any of the files actually. What I did is that crossflashed my Docomo variant to EA which went without error. But NT code is not matching now and there is no bootloader unlock option. Not only the LG stopped to provide unlock.bin but bootloader menu is not available. If you reach there on any way the device is restarting in normal mode. I was thinking in many possibilities but not sure if any is feasible. tried to change between many EA ROMS. Also I was thinking after all to do the chip erase by LGUP. As the PDM is not working now probably would not work after erase, in that case one more step only bacward. By the way I dont know why the LGUP can not touch the device in the blue factory mode. That is the point where the PDM set can not be done for the NT change. Otherwise root or bootloader unlock would not be important to me about other reason than replace bootloader to the EA version.
SZ0TYI said:
I can not reach any of the files actually. What I did is that crossflashed my Docomo variant to EA which went without error. But NT code is not matching now and there is no bootloader unlock option. Not only the LG stopped to provide unlock.bin but bootloader menu is not available. If you reach there on any way the device is restarting in normal mode. I was thinking in many possibilities but not sure if any is feasible. tried to change between many EA ROMS. Also I was thinking after all to do the chip erase by LGUP. As the PDM is not working now probably would not work after erase, in that case one more step only bacward. By the way I dont know why the LGUP can not touch the device in the blue factory mode. That is the point where the PDM set can not be done for the NT change. Otherwise root or bootloader unlock would not be important to me about other reason than replace bootloader to the EA version.
Click to expand...
Click to collapse
I was actually just about to try to crossflash my L-51A to the TM2X variant. What do you mean by NT code is not matching? What advice can I get about doing this?
nclam said:
I was actually just about to try to crossflash my L-51A to the TM2X variant. What do you mean by NT code is not matching? What advice can I get about doing this?
Click to expand...
Click to collapse
can you please make a full dump of your FW?
i have a ruined L-51A with a lost IMEI, and I didn't think I'll end up having this problem so I didn't back up the whole contents...
Same here. If anyone has a docomo kdz please let us know.
LG v60 51a does not have kdz.
But if you update outside of Japan, try it like a link. I tried it in the Korean community and confirmed that it was updated.
Cross-flash will be difficult in a general way.
The partition composition is different between the US version and the European version.
[How To] Update Sharp Aquos R6 Outside Japan - Docomo Version - Without Factory Reset
It's been said that Docomo phone are easier to update, only Japan VPN needed. But in reality it's not that simple. Even after using VPN, most of the time you wont be able to find OTA update through system update. Sure factory reset can help you...
forum.xda-developers.com
Rko4A-GE said:
I bought this phone second hand and I can't seem to find firmwares of this specific model, would love to know if I can crossflash without any problems?
Click to expand...
Click to collapse
SIR . can you have backup up partision for sharing. i need softbank firmware
andamiro00 said:
LG v60 51a does not have kdz.
But if you update outside of Japan, try it like a link. I tried it in the Korean community and confirmed that it was updated.
Cross-flash will be difficult in a general way.
The partition composition is different between the US version and the European version.
[How To] Update Sharp Aquos R6 Outside Japan - Docomo Version - Without Factory Reset
It's been said that Docomo phone are easier to update, only Japan VPN needed. But in reality it's not that simple. Even after using VPN, most of the time you wont be able to find OTA update through system update. Sure factory reset can help you...
forum.xda-developers.com
Click to expand...
Click to collapse
Hi am unable to find google services framework in my l-51a docomo v60 please help me to upgrade to A12 am from india i just bought this phone new demo unit
Dharshan yadav said:
Hi am unable to find google services framework in my l-51a docomo v60 please help me to upgrade to A12 am from india i just bought this phone new demo unit
Click to expand...
Click to collapse
There will be a Google framework.
App-App Information-Three points on the right-click System Display and search or search for Google Framework.
andamiro00 said:
There will be a Google framework.
App-App Information-Three points on the right-click System Display and search or search for Google Framework.
Click to expand...
Click to collapse
Pleade refer screenshot if i type google in setings only these are coming
Dharshan yadav said:
Pleade refer screenshot if i type google in setings only these are coming
Click to expand...
Click to collapse
Settings - Search in the app.
Of course, it doesn't appear in the integrated search.
Tried that too refer attatched
Dharshan yadav said:
Tried that too refer attatched
Click to expand...
Click to collapse
Thankyou am able to find it
Also would like to know is it ok to install global stock rom in docomo l-51a
Dharshan yadav said:
Thankyou am able to find it
Also would like to know is it ok to install global stock rom in docomo l-51a
Click to expand...
Click to collapse
Yes you can ,i crossflashed my A51L docomo variant to candian TMO Android 12 .it working very nice.before that you should be very patient.take every file backup in efil mode store the backup very safe place...docomo model does not show OP_A OP_B floder...
k.syedhussain said:
Yes you can ,i crossflashed my A51L docomo variant to candian TMO Android 12 .it working very nice.before that you should be very patient.take every file backup in efil mode store the backup very safe place...docomo model does not show OP_A OP_B floder...
Click to expand...
Click to collapse
Thank you so much yesterday I have upgraded the os to Android 12
If needed I'll ask for you help in future for cross flashing and rooting this mobile
Once again thank you so much for your promt response
Dharshan yadav said:
Thank you so much yesterday I have upgraded the os to Android 12
If needed I'll ask for you help in future for cross flashing and rooting this mobile
Once again thank you so much for your promt response
Click to expand...
Click to collapse
If you upgraded ,comfortable with docomo firmware use it as its ....but i not comfortable with Japanese bloatwares so i crossflashed and tried to get volte but not possible....
k.syedhussain said:
If you upgraded ,comfortable with docomo firmware use it as its ....but i not comfortable with Japanese bloatwares so i crossflashed and tried to get volte but not possible....
Click to expand...
Click to collapse
https://www.reddit.com/r/LGV60/comments/xqfmu6
volte try this way
Related
Hi!! Kinda new here. Can anyone help me or guide me on how to unlock my LG phone? It's locked on T-Mobile network, it was bought in the US and I'm from the Philippines, so it won't accept our local SIM. Can anyone please help me? I also have Galaxy Light it was also locked by MetroPCS TMo still. But I think I saw a post here somewhere.
try rooting with kingroot
Oh okay. And after rooting? What should i do?
miyaka said:
Oh okay. And after rooting? What should i do?
Click to expand...
Click to collapse
so i dont know your device model. But i would suggest you to install custom recovery like TWRP if you are rooted and also installing new OS is a good idea lineage has relased updates to latest OS 7 nougat so look for it. But be carefull always look for software compatibile with your device unless you want to brick it !!!
and for unlocking to other operators try Hidden menu --- http://mobilespecs.net/phone/codes/LG/LG_G3_BEAT_D722K.html
I'm looking for the latest USA factory unlocked firmware for the Stylo 4 (KDZ file), does anyone know where I can find that? I have looked everywhere I can think of and everyone has carrier specific firmware, but not the one I am looking for.
The specific model is LMQ710ULM.AUSABK.
The IMEI is: 357183090498307
Try This
SpikeyPsyche said:
I'm looking for the latest USA factory unlocked firmware for the Stylo 4 (KDZ file), does anyone know where I can find that? I have looked everywhere I can think of and everyone has carrier specific firmware, but not the one I am looking for.
The specific model is LMQ710ULM.AUSABK.
The IMEI is: 357183090498307
Click to expand...
Click to collapse
Hi there,
I would like to know which specific carrier that your looking for.
Sincerely
KIBS2173
KIBS2173 said:
Hi there,
I would like to know which specific carrier that your looking for.
Sincerely
KIBS2173
Click to expand...
Click to collapse
It is the unlocked model sold directly by LG in the USA, so it is non-carrier firmware.
Try This
SpikeyPsyche said:
It is the unlocked model sold directly by LG in the USA, so it is non-carrier firmware.
Click to expand...
Click to collapse
Hi there,
You can try this website.
https://lg-firmwares.com/
or
https://lg-firmwares.com/lg-lmq710ulm-firmwares/#tab=firmwares
since your phone is network unlocked I think it might be safe to reinstall the firmware.
However, if you have your doubts feel free to search it online or ask LG directly.
Sincerely
KIBS2173
KIBS2173 said:
Hi there,
You can try this website.
https://lg-firmwares.com/
or
https://lg-firmwares.com/lg-lmq710ulm-firmwares/#tab=firmwares
since your phone is network unlocked I think it might be safe to reinstall the firmware.
However, if you have your doubts feel free to search it online or ask LG directly.
Sincerely
KIBS2173
Click to expand...
Click to collapse
Thank you. I found out that they never released the KDZ for the factory unlocked phones (region USA). So, the only way to update my phone would be to flash carrier firmware, which, is kinda risky, since it would technically be a crossflash. I would likely lose certain features, such as Wi-Fi calling and/or VoLTE. One of the few firmwares that supports wi-fi calling is the T-Mobile firmware, but I wouldn't flash that firmware because it is different than the hardware of my phone (their model has 2 GB of RAM, mine has 3 GB of RAM, etc...
Try This
SpikeyPsyche said:
Thank you. I found out that they never released the KDZ for the factory unlocked phones (region USA). So, the only way to update my phone would be to flash carrier firmware, which, is kinda risky, since it would technically be a crossflash. I would likely lose certain features, such as Wi-Fi calling and/or VoLTE. One of the few firmwares that supports wi-fi calling is the T-Mobile firmware, but I wouldn't flash that firmware because it is different than the hardware of my phone (their model has 2 GB of RAM, mine has 3 GB of RAM, etc...
Click to expand...
Click to collapse
Hi there,
Yes, while I was researching it online I found two firmware for this phone for the US region. But anyways have you tried using a PC suite from LG to reinstall the firmware. Or have you tried going on to the recovery mode and just reset the whole device. Or better try to install a custom ROM, to be honest I think it might be okay if you flashed a Europe region firmware, but make sure you back up the current firmware. I flashed a Samsung phone which was used to be locked and then I unlocked it after that I flashed the carrier firmware and it didnt carrier locked my phone. But anyways try your best.
Sincerely
KIBS2173
Hello all,
I recently purchased V60 with model number V600TM. I'm outside of US.
And it stuck on Android 10 with security patch on February 2020.
Any recommendation, please?
Can anyone confirm if i can use this method here?
How to Flash Stock Firmware on LG Smartphone ? - LG-Firmwares.com
Tutorial how to flashing LG device. Change or update Firmware on LG phones.
lg-firmwares.com
That method using LGUP is totally fine but you need the firmware for 600TM. Android 12 is not available for download from the site yet.
Hello,
received yesterday my unit with Android 10 and with exactly you issue: unable to apply the downloaded OTA update.
There are 3 types of TM software otas or roms, there is tmobile, us cellular, and canadian so make sure you downloed the rom that has the initials TMO next to it.
I updated my TM version v60 to A12 (https://forum.xda-developers.com/t/lmv600tm-restore-ugrade-guide-a12.4447457)
After that I can get OTA but cannot install successfully (P.S. bootloader is unlocked and the device is rooted)
showgood163 said:
I updated my TM version v60 to A12 (https://forum.xda-developers.com/t/lmv600tm-restore-ugrade-guide-a12.4447457)
After that I can get OTA but cannot install successfully (P.S. bootloader is unlocked and the device is rooted)
Click to expand...
Click to collapse
use that method mean restore your phone with other's OS, do it when you phone brick, otherwise use LGUP flash your exactly KDZ is the best.
dangtoi1993 said:
use that method mean restore your phone with other's OS, do it when you phone brick, otherwise use LGUP flash your exactly KDZ is the best.
Click to expand...
Click to collapse
Thanks for the input.
Does the partition restoring way affects the installing of OTAs?
honestloez said:
Hello all,
I recently purchased V60 with model number V600TM. I'm outside of US.
And it stuck on Android 10 with security patch on February 2020.
Any recommendation, please?
Click to expand...
Click to collapse
Use a vpn and you will get updates
Let me repeat myself:
If you are rooted, OTA will not happen. Your phone will download the update but not complete the updating. The advice to use LGUP for partition restoration will NOT help! First, you will lose your rooted status and two, OTA will not succeed. Bringing you back to square one.
Royaltiger said:
Let me repeat myself:
If you are rooted, OTA will not happen. Your phone will download the update but not complete the updating. The advice to use LGUP for partition restoration will NOT help! First, you will lose your rooted status and two, OTA will not succeed. Bringing you back to square one.
Click to expand...
Click to collapse
sure, LG is alway hard about firmware.
I have Oneplus phone, its had super partitions a/b like V60 (and modern android phone). On Oneplus 8 pro, i can download and install while keeping root it self, easy as f.
I'm at my wit's end on this. Calls stopped working the other day due to 3G disablement as far as I can tell. AT&T model unlocked and using with Simple Mobile on T-Mobile network. Calls would just say "Calling" for a long time and then eventually disconnect. I could switch to GSM and make calls again, but slow data. Simple told me to get a new SIM and when trying to activate, it shows ineligible IMEI due to no Volte it seems.
I'm trying to get that fixed, but running into various issues.
LM-G850UM
I tried to crossflash (https://forum.xda-developers.com/t/tutorial-crossflash-bypass-opid-mismatched-error.4345963/)
I flashed G850QM30c_00_NAO_US_OP_0224.kdz but it didn't ask me to change the model, so it still shows LM-G850UM software G850UM30c. IMEI is the same.
Since this didn't get calls back or Volte, I tried updating the MBN (https://forum.xda-developers.com/t/...ther-qualcomm-powered-lg-devices-too.4343655/)
Data shows 4G. Calls don't even try to connect.
I don't know what to do next and don't have much time to try to figure it out. I like the G8X, so I'm hoping there's a way to save it.
Any thoughts from the experts?
Brando81 said:
I'm at my wit's end on this. Calls stopped working the other day due to 3G disablement as far as I can tell. AT&T model unlocked and using with Simple Mobile on T-Mobile network. Calls would just say "Calling" for a long time and then eventually disconnect. I could switch to GSM and make calls again, but slow data. Simple told me to get a new SIM and when trying to activate, it shows ineligible IMEI due to no Volte it seems.
I'm trying to get that fixed, but running into various issues.
LM-G850UM
I tried to crossflash (https://forum.xda-developers.com/t/tutorial-crossflash-bypass-opid-mismatched-error.4345963/)
I flashed G850QM30c_00_NAO_US_OP_0224.kdz but it didn't ask me to change the model, so it still shows LM-G850UM software G850UM30c. IMEI is the same.
Since this didn't get calls back or Volte, I tried updating the MBN (https://forum.xda-developers.com/t/...ther-qualcomm-powered-lg-devices-too.4343655/)
Data shows 4G. Calls don't even try to connect.
I don't know what to do next and don't have much time to try to figure it out. I like the G8X, so I'm hoping there's a way to save it.
Any thoughts from the experts?
Click to expand...
Click to collapse
Make a back up,and cross flash it with T-Mobile firmware.Problem solved.
Thanks Surge!
I crossflashed to general firmware. Where's the best place for the TMobile firmware? Just off their website? Will that lock the phone again, or will I still be able to use the Simple Mobile Service?
Brando81 said:
Thanks Surge!
I crossflashed to general firmware. Where's the best place for the TMobile firmware? Just off their website? Will that lock the phone again, or will I still be able to use the Simple Mobile Service?
Click to expand...
Click to collapse
It shouldn't lock the device if it's already unlocked.You can also use G8 firmware as well.(same device)Look here,this should get you the firmware you need.
Models - LG-Firmwares.com
Free archive of LG firmwares. Comparison of features and reviews of all mobile devices. Quick download of updates for your device.
lg-firmwares.com
Thanks again, Surge.
That's where I got my KDZ before. I used the one here: https://lg-firmwares.com/lg-lmg850qm-firmwares/ and used the 3/24/22 version for Android 11. When I flashed it with LG UP, it didn't ask me to change models, which I'm not sure if that's why it didn't trigger it to start working again.
Brando81 said:
Thanks again, Surge.
That's where I got my KDZ before. I used the one here: https://lg-firmwares.com/lg-lmg850qm-firmwares/ and used the 3/24/22 version for Android 11. When I flashed it with LG UP, it didn't ask me to change models, which I'm not sure if that's why it didn't trigger it to start working again.
Click to expand...
Click to collapse
Most are using the international firmware for the G8 and G8x models.Which is what the qm firmware is.If you're carrier is T-Mobile or any T-Mobile MVNO,I would solely use T-Mobile firmware.My G8x is AT&T branded and factory unlocked,and I tried using Tmobile service about 2 months ago and was having issues sending text messages.I could place and receive calls and get text but couldn't send them period.
Yeah, so my G8X is AT&T unlocked. AT&T didn't activate VOLTE on this model, so when T-Mobile shut down their 3G network, Simple Mobile calls won't work and the current IMEI shows it's not eligible (because of the model.) At least that's my understanding so far.
So for the G8, is this the firmware I should crossflash? https://lg-firmwares.com/lg-lmg820tm-firmwares/ or I could try the QM which may or may not work. Is that correct? Basically going to the 820 firmwares instead of the 850?
Brando81 said:
Yeah, so my G8X is AT&T unlocked. AT&T didn't activate VOLTE on this model, so when T-Mobile shut down their 3G network, Simple Mobile calls won't work and the current IMEI shows it's not eligible (because of the model.) At least that's my understanding so far.
So for the G8, is this the firmware I should crossflash? https://lg-firmwares.com/lg-lmg820tm-firmwares/ or I could try the QM which may or may not work. Is that correct? Basically going to the 820 firmwares instead of the 850?
Click to expand...
Click to collapse
I would go with the T-Mobile firmware since you're on their network.It wouldn't make a difference with VoLTE enabled with an AT&T sim.Once you pull the sim,and swap it it defaults back and turns the IMS settings off until it receives the configuration from their servers.Yes,820 firmware.It at least has the higher android builds,and better security patches.Once you put T-Mobile firmware on the device it should all work regardless of IMEI.
Edit:Make a back-up.Don't forget to do that first!
OK Surge....you've been helpful and seem to know what you're doing. What did I mess up?
I followed the cross flash instructions. I flashed the 820QM firmware first, and System loaded but the touchscreen wouldn't respond. I could only use the hard phone buttons. Decided to go to what you recommended with 820TM and it wouldn't boot at all - black screen - but I could still get to QFIL and LGUP.
I reflashed 850QM and touchscreen works again and I'm back to where I started.
When I flashed 820s, It did ask me if I wanted to change model numbers this time and I said Yes. And it asked it said it was changing some partitions on the 820 loads.
I may have been working on this too late. I appreciate your help so far.
Brando81 said:
OK Surge....you've been helpful and seem to know what you're doing. What did I mess up?
I followed the cross flash instructions. I flashed the 820QM firmware first, and System loaded but the touchscreen wouldn't respond. I could only use the hard phone buttons. Decided to go to what you recommended with 820TM and it wouldn't boot at all - black screen - but I could still get to QFIL and LGUP.
I reflashed 850QM and touchscreen works again and I'm back to where I started.
When I flashed 820s, It did ask me if I wanted to change model numbers this time and I said Yes. And it asked it said it was changing some partitions on the 820 loads.
I may have been working on this too late. I appreciate your help so far.
Click to expand...
Click to collapse
I think someone else encountered this once before,and it was caused by certain manufacturering dates of the device.Some models can use 820 firmware,and some can only use 850.Looks as if yours is kind of stuck with 850 firmware only.I think the AT&T version I have I could go either way it worked with no problems.I still have my G8x but never really used it.I bought it because it came with the dual screen attachement,and $125 I took it.Here's my Sprint copy if you want to give it a try.It's a LUNS copy minus LUNS 5 for IMEI information etc.I was in the same boat as you on certain features not working with AT&T at one point myself and had to crossflash the Sprint version of the device.With that being said,try this one from LG Fans first.If that doesn't work,try my LUNS Sprint copy and let me know which ones works the best.
LG G850UM | LG G8X ThinQ | Version: G850UM30a_00_0901 | Firmware for Region: CAN from - Lg-firmwares.com
LG G850UM Download the latest version of firmware | OS Version: Android 11 R | Firmware version: G850UM30a_00_0901 | CAN - Fan club LG-firmwares
lg-firmwares.com
Sprint LG G8x Last Update - Google Drive
drive.google.com
So interesting news....I obviously didn't try making calls last night at 2AM, but apparently reflashing with the same exact 850QM software I used before seems to have fixed the issue. Maybe changing the model to 820 and then changing back to 850? Who knows? That's like the 3rd thing that happened with this process that I have no idea why it started working differently, but hey I'm happy and back up and rolling.
Thanks for all of your help, Surge! I was truly at wits end, and had already ordered a new phone, even though I'm happy with the G8X overall. Now I can return that and keep rolling with the G8X.
Thanks again, you were a huge help and its much appreciated!
Brando81 said:
So interesting news....I obviously didn't try making calls last night at 2AM, but apparently reflashing with the same exact 850QM software I used before seems to have fixed the issue. Maybe changing the model to 820 and then changing back to 850? Who knows? That's like the 3rd thing that happened with this process that I have no idea why it started working differently, but hey I'm happy and back up and rolling.
Thanks for all of your help, Surge! I was truly at wits end, and had already ordered a new phone, even though I'm happy with the G8X overall. Now I can return that and keep rolling with the G8X.
Thanks again, you were a huge help and its much appreciated!
Click to expand...
Click to collapse
Glad you got it working!I run in to a same similar issue with a Note 8 I have,and it being an international unlocked AT&T phone.No calls would work period,and swapped firmware over and over and finally started to give up and flashed the stock firmware back and it worked.It's something that hangs in Android with the changed IMS settings that are sent to the device.It's all odd at the moment with carriers,but nothing surprises me anymore..lol..
"G850QM30c_00_NAO_US_OP_0224.kdz" Is a BPT kdz and is not truly open even though it says, "NAO US OP".
I got the phone working by using "G850QM30b_00_NAO_US_OP_0902.kdz", the "real" open kdz. Everything worked fine after that.
BereiBlue said:
"G850QM30c_00_NAO_US_OP_0224.kdz" Is a BPT kdz and is not truly open even though it says, "NAO US OP".
I got the phone working by using "G850QM30b_00_NAO_US_OP_0902.kdz", the "real" open kdz. Everything worked fine after that.
Click to expand...
Click to collapse
Can someone please explain to me the different versions of the firmware
BPT and CCT and USA
are they really different
there is also the 40A now which is android 12?
G850QM40b_00_NAO_US_OP_0805.kdz
https://lg-firmwares.com/lg-lmg850qm-firmwares/
most of these firmwares are are 4GB in size, the newer KDZ are just 1GB
G850QM30c_00_NAO_US_OP_0224.kdz
My ATT G8X just got the update to G850QM40A which is android 12
how is android 12? do the firehose , root and bootloader unlock apply
doctorman said:
Can someone please explain to me the different versions of the firmware
BPT and CCT and USA
are they really different
there is also the 40A now which is android 12?
G850QM40b_00_NAO_US_OP_0805.kdz
https://lg-firmwares.com/lg-lmg850qm-firmwares/
most of these firmwares are are 4GB in size, the newer KDZ are just 1GB
G850QM30c_00_NAO_US_OP_0224.kdz
My ATT G8X just got the update to G850QM40A which is android 12
how is android 12? do the firehose , root and bootloader unlock apply
Click to expand...
Click to collapse
Yes,the firehose will always work regardless of the Android version.Also from what I have read,yes the same procedures work for A12 for root and unlocking the bootloader.As always,backup your firmware before rooting and attempting to unlock the bootloader just in case something goes wrong!
Surgemanxx said:
Yes,the firehose will always work regardless of the Android version.Also from what I have read,yes the same procedures work for A12 for root and unlocking the bootloader.As always,backup your firmware before rooting and attempting to unlock the bootloader just in case something goes wrong!
Click to expand...
Click to collapse
Do you think there is any point to crossflash
USA G850QM40b_00_NAO_US_OP_0805.kdz
on ATT G8X to be used on Tmobile network? I can do the VOLTE patch after rooting it . is it worth the headache?
doctorman said:
Do you think there is any point to crossflash
USA G850QM40b_00_NAO_US_OP_0805.kdz
on ATT G8X to be used on Tmobile network? I can do the VOLTE patch after rooting it . is it worth the headache?
Click to expand...
Click to collapse
QM versions are international unlocked versions of the firmware.My branded AT&T G8x had issues sending text messages with T-Mobile service I do remember.I crossflahed my variant with the QM version and it worked flawless after that.But,I do have a full backup copy of the AT&T firmware if I ever decide to put it back.
Surgemanxx said:
QM versions are international unlocked versions of the firmware.My branded AT&T G8x had issues sending text messages with T-Mobile service I do remember.I crossflahed my variant with the QM version and it worked flawless after that.But,I do have a full backup copy of the AT&T firmware if I ever decide to put it back.
Click to expand...
Click to collapse
May I ask how did you back it up?
also if I have androind 11 ATT can I crossflash to android 12? that should not be an issue right?
the partitioning is not changed in the update?
Like the title says I'm trying to update to android 12 outside Japan, already tried vpn and factory resetting to no avail.
[How To] Update Sharp Aquos R6 Outside Japan - Docomo Version - Without Factory Reset
It's been said that Docomo phone are easier to update, only Japan VPN needed. But in reality it's not that simple. Even after using VPN, most of the time you wont be able to find OTA update through system update. Sure factory reset can help you...
forum.xda-developers.com
Try this method Based on v60
Updateable on SoftBank and DoCoMo devices.
can you plz share the backup of your LG v60 Japan (a001) phone.
i need to fix my phone as well as many others stucked with this JAPAN varient.
M.Z.F said:
can you plz share the backup of your LG v60 Japan (a001) phone.
i need to fix my phone as well as many others stucked with this JAPAN varient.
Click to expand...
Click to collapse
How do I back it up? I'm quite new to modding, so I have no clue how to do it,
email me:
[email protected]