hi, got a problem...I was on last fastboot weekly firmware and tried to install new with weekly by recovery, but can't find on recovery internal storage, so I tried to wipe data, but it said encrypted, but haven't encrypted it....So I decided to flash with fastboot last stock EU, but got error message and if I reboot, i go directly on fastboot...I can go also on recovery
thanks
also, I can't boot on stock recovery to wipe data or else
impossible to shutdown the device...still boot on fastboot...will burn my screen..
finally got recover my phone by following this tuto
very easy and well explained
thanks
Related
Im stuck in a pickle. I tried to update to neutrino 2.8 but got caught in a boot loop. I followed instructions that worked last time and tried to repair my recovery and it wiped the recovery and all other system data, but fastboot wont reboot or install the recovery image it only wipes the and formats. help please
Your details are not that clear. Either you are not using fastbook incorrect, or you have somehow borked the bootloader/
If the latter, you can try using RSDlite to reflash the bootloader. See the threads on how to unlock your bootloder for these steps. This is as close to going back to square one as you can.
BTW, you might also say how you did this. If just using CWM to install zips it is really hard to screw up your recovery.
I am trying to use fastboot to flash a recovery But when i flash the recovery i get
error cannot load recovery
or
waiting on device
But it will sucessfully wipe and format, just not flash or for some reason reboot the phone
I have it figured out to the point where now i try to flash the recovery and it hangs at
Waiting for Device
I tried everything i can think of
reboot
Re-install drivers
re download file
Hi all
I am in urgent need of help to fix my Atrix 4G.
The Story:
I have an Atrix 4G. It was on 2.2.4 then official update came and I updated it to 2.2.6.
Then I was wondering about installing custom rom. This was my first time to install a custom rom. So I googled and found.
Code:
http://forum.xda-developers.com/showthread.php?t=1398819
Neutrino ROM V2.9 [14/08].
So I rooted and unlocked my fone. My fone was successfully rooted and unlocked and I restarted it and there was Unlocked written on Booting Screen.
In this procedure I had to reset the phone so it was back to 2.2.4.
After that I downloaded the above rom put in in SD Card and Downloaded Recovery APK from market and it asked to restart the phone with power adapter plugged to start so I did the same. And recovery started. Then following the instructions I installed the custom rom and it was installed successfully it was my first time so I didnt took any backups unfortunately. So after installation the phone did'nt actually start. It was stuck on Booting Screen with Moto Logo.
So I again googled and started to find the solution some said restart some said remove battery some said wait I tried all but no result.
Then I tried to install the stock rom.Following this
Code:
http://androidforums.com/atrix-4g-all-things-root/510778-flashing-back-stock.html
When i start to run RSD lite it says Creating Image and then throws an error like Unable to send RAM files.
Now I want to fix my Atrix 4g and there is no backup and no recovery mod.
My fone can go into options like Fastboot and RSD Protocol Mode. I mean I can access options on pressing Power and Volume Up/Down buttons.
Can any one please tell me solution? I will be very very thankful.
In fastboot flash recovery
fastboot devices
fastboot erase recovery
fastboot falsh recovery recovery.img
fastboot reboot
Go to recovery mode, try to wipe data, cache and dalvik. If you have Neutrino rom on your internal SDcard you can flash it with recovery.
ovitz said:
In fastboot flash recovery
fastboot devices
fastboot erase recovery
fastboot falsh recovery recovery.img
fastboot reboot
Go to recovery mode, try to wipe data, cache and dalvik. If you have Neutrino rom on your internal SDcard you can flash it with recovery.
Click to expand...
Click to collapse
I have erased data many time from the Android Recovery
And I think there will be no recovery.img. Where can I get it??
There is option of data and cache partition wipe but there is no option like Dalvik.
Can you please guide me it was my first time with custom roms and I didnt took any backups.
in fastboot package is recovery...
ovitz said:
in fastboot package is recovery...
Click to expand...
Click to collapse
Thanks, Fortunately my senior has installed Custom rom in it. And it is working fine with custom rom.
I need help, My phone was unlocked officially, and I have ZCX TWRP build 28081016 before. Then I flash Nougat ROM (Pure Nexus) from MIUI 8 8.2.3.0 without Wipe Internal Storage. Then it works normally. But since I go back to TWRP, I got Decrypt Data with password there. So I cancel it and then I got 0 Internal Storage. And it back while i text some **** in the decrypt password.
While reboot to system, It also asking password too.
Then I reflashing ROM with Clean Install method (wipe anything) but its still asking goddamn passwords.
Then I go Reboot Recovery again and text any **** password but it works! I got my Internal Storage back.
Then I try to flash zcx recovery build 30122016 (latest version) from recovery. Now I got my recoveries gone. There's only phone with usb cable images. Anything goes wrong (corrupted boot.img or something) here? Is it save if I reflash from PC? How to don't get decrypt sdcard?
I got other problem too. I have changed my splash logo (boot logo) using Google Pixels boot logo here. But I have never come back to Mi splash logo while clean installing MIUI ROM from recovery. Where is my problem here?
And this is my big problem (maybe) (cause I still don't get problems here). Anyone of you facing your Fastboot Logo with tiny Linux Penguin images? I can't go "adb reboot fastboot" here. And I can go to fastboot mode with volume- + power button only. It's not working too with reboot bootloader in TWRP. I guess my fastboot isn't working with Miflash or some ****. But works with adb. How can I get Mi Bunny Fastboot again?
Please help me. and tell me what should I do. Thankyou.
ojedee said:
I need help, My phone was unlocked officially, and I have ZCX TWRP build 28081016 before. Then I flash Nougat ROM (Pure Nexus) from MIUI 8 8.2.3.0 without Wipe Internal Storage. Then it works normally. But since I go back to TWRP, I got Decrypt Data with password there. So I cancel it and then I got 0 Internal Storage. And it back while i text some **** in the decrypt password.
While reboot to system, It also asking password too.
Then I reflashing ROM with Clean Install method (wipe anything) but its still asking goddamn passwords.
Then I go Reboot Recovery again and text any **** password but it works! I got my Internal Storage back.
Then I try to flash zcx recovery build 30122016 (latest version) from recovery. Now I got my recoveries gone. There's only phone with usb cable images. Anything goes wrong (corrupted boot.img or something) here? Is it save if I reflash from PC? How to don't get decrypt sdcard?
I got other problem too. I have changed my splash logo (boot logo) using Google Pixels boot logo here. But I have never come back to Mi splash logo while clean installing MIUI ROM from recovery. Where is my problem here?
And this is my big problem (maybe) (cause I still don't get problems here). Anyone of you facing your Fastboot Logo with tiny Linux Penguin images? I can't go "adb reboot fastboot" here. And I can go to fastboot mode with volume- + power button only. It's not working too with reboot bootloader in TWRP. I guess my fastboot isn't working with Miflash or some ****. But works with adb. How can I get Mi Bunny Fastboot again?
Please help me. and tell me what should I do. Thankyou.
Click to expand...
Click to collapse
You got your device encryption so remove it
Boot to fast boot volume - plus power button combo then connect to PC
Then use fast boot modified in order to boot into edl
Then flash latest miui fast boot ROM through miflash
Then reboot
Then unlock bootloader flash zcx twrp the hen format data from twrp under wipe option
[email protected] said:
You got your device encryption so remove it
Boot to fast boot volume - plus power button combo then connect to PC
Then use fast boot modified in order to boot into edl
Then flash latest miui fast boot ROM through miflash
Then reboot
Then unlock bootloader flash zcx twrp the hen format data from twrp under wipe option
Click to expand...
Click to collapse
But i have never ever encrypt anything on my phone. Now my device can't do adb reboot fastboot. But if i reboot to recovery first. It works with power and volume down
Hello! This is my first thread on the forum;
I'm writing because I think I soft bricked my Xiaomi Mi Pad 4 LTE, let me explain from the very beginning.
It's a brand new device, bought today, and with a custom italian ROM which was sold with.
I just wanted to root it, and the bootloader was already unlocked because it was a custom ROM, so I tried to install TWRP (mocha version for Mi Pad) with Fastboot and then I wanted to install Magisk.
The issue is that, when I tried to flash TWRP to recovery with fastboot flash recovery twrp.img, it all went "OK" but then TWRP was not actually flashed and couldn't boot it with key combinations, it just looked like it wasn't there. I also tried to boot it without flashing, with fastboot boot twrp.img but it gave me
"Failed to load/authenticate boot image: 00000050" error
Looking on the web, I found someone who told to try fastboot flash boot twrp.img and so, without even thinking, I did it.
That's the main issue. I rebooted, and found that TWRP started, but now I couldn't boot my device anymore, because the default boot.img file was replaced by twrp.img. So, practically, TWRP replaced my device's default system (I think?).
Then, I tried to find a stock firmware for Mi Pad 4 (Clover) on the web, and I found it, so I flashed the stock firmware boot.img, fastboot flash boot boot.img, but when I rebooted, the device was stuck in the loading screen with three dots loading over a "Powered by Android" logo. I waited 20 minutes, nothing, it looks stuck, so this stock boot.img doesn't seem to work.
I can actually flash TWRP and that stock boot image both whenever I want and switch between them; the first works, the latter doesn't.
So, in poor words: I flashed twrp.img as boot.img and now I can't boot normally, but TWRP starts when turning on my device.
But I just want to get my default boot.img or system, or any other way to reaccess to my device. That's fine even if I have to hard reset or wipe everything, it's fine even if I am going to lose data, but please, just help me.
Can someone help me? I'm just a newbie in this world, please help me unbricking my device.
Thanks in advance.
Try installing twrp again and boot to it
Download custom rom.of your choice ( im using hovac and it been great for a year now )
Move it to your mipad via comouter
Format everything in twrp and install the rom and gapps
--- I just remembered havin same issue u having and if im not mistaking : u should reboot to recovery right after installing twrp ( you dont reboot to system )
Im not really sure about it cause it happened long time ago
@DanielVipx
Sorry, seems you tried that already. Did you try the mi flash tool?
This might help:
https://osdn.net/projects/xiaomifirmwareupdater/storage/Stable/V10/clover/
I made a mess, I really did. Was on Paranoid Q5 and wanted to try the CrDroid 7, so flashed DFE to decrypt the phone. However this made the phone stuck in fastboot. Don't really know if I misunderstood some instruction, or got hold of wrong file...
But here's the real problem - I cant install TWRP through the fastboot!
The Shell does report "sending, OKAY, writing, OKAY", but it wont reboot to TWRP either through ADB or manually.
Is this a common problem? Any help would be appreciated...
When I experienced something like that in the past, I used fastboot to directly boot to recovery, and then permanently flash twrp from inside this temporarily booted twrp. After flashing, reboot again to recovery and you are now ready to flash a new rom of your choice.
So you flashed dfe then rebooted but phone stuck in fastboot? Which dfe zip did you use?
It appears that DFE wiped all the partitions that's why even the recovery is not being flashed because partitions are not getting detected.
The easiest way to boot your phone is to flash stock ROM using flash tool to recreate the partitions. After that anything else can be done.