Hello everyone!
My phone kinda died a few days ago, i was watching some TikTok and it crashed and restarted.
And now here's where the problems start:
It just stucks in a boot loop, it just shows the Huawei Logo for a few seconds, turns black, vibrates, and redo's the things i just mentioned.
Some information about the Phone:
It was running the latest Updates,
I'm able to enter "FASTBOOT&RESCUE MODE"(the thing when you hold Volume down)
Fastboot on the PC detects the device, but trying to run a command such as "fastboot erase cache" doesn't work and shows this:
erasing 'cache'...
FAILED (remote: Command not allowed)
finished. total time: 0.011s
The Device was NOT rooted, Any help is much appreciated.
Backing up my files would be the most important thing, it has pictures, that are very important to me.
Thanks for reading!
hoppi1337 said:
Backing up my files would be the most important thing, it has pictures, that are very important to me.
Click to expand...
Click to collapse
The only chance is to use the 'Emergency backup' feature in eRecovery. Try this: connect your phone to the PC and press and hold the Power and Vol Up buttons for at least 10 seconds.
-Alf- said:
The only chance is to use the 'Emergency backup' feature in eRecovery. Try this: connect your phone to the PC and press and hold the Power and Vol Up buttons for at least 10 seconds.
Click to expand...
Click to collapse
Hello, Thanks for the answer first off all.
I did try that and that will just keep me in the HUAWEI Logo for ever.... i was waiting over 10 minutes but nothing happened.
hoppi1337 said:
Hello, Thanks for the answer first off all.
I did try that and that will just keep me in the HUAWEI Logo for ever.... i was waiting over 10 minutes but nothing happened.
Click to expand...
Click to collapse
Looks like your data is lost...
You can try to recover your phone by installing a Service ROM (if it's not a hardware problem - dead eMMc memory etc.) using dload method (the process will erase all your data).
-Alf- said:
Looks like your data is lost...
You can try to recover your phone by installing a Service ROM (if it's not a hardware problem - dead eMMc memory etc.) using dload method (the process will erase all your data).
Click to expand...
Click to collapse
I did try to install a recovery rom before, sadly this all leads to an error code.
which is this:
downloading 'boot.img'...
OKAY [ 0.375s]
booting...
FAILED (remote: Command not allowed)
finished. total time: 0.384s
hoppi1337 said:
I did try to install a recovery rom before, sadly this all leads to an error code.
which is this:
downloading 'boot.img'...
OKAY [ 0.375s]
booting...
FAILED (remote: Command not allowed)
finished. total time: 0.384s
Click to expand...
Click to collapse
This method does not work on Huawei,
in fastboot mode run command
fastboot oem get-build-number
and post result.
-Alf- said:
This method does not work on Huawei,
in fastboot mode run command
fastboot oem get-build-number
and post result.
Click to expand...
Click to collapse
(bootloader) :ANE-LX1 9.1.0.381(C432E7R1P7)
OKAY [ 0.007s]
finished. total time: 0.008s
hoppi1337 said:
(bootloader) :ANE-LX1 9.1.0.381(C432E7R1P7)
OKAY [ 0.007s]
finished. total time: 0.008s
Click to expand...
Click to collapse
Download service ROM
https://androidhost.ru/Y0n
Unpack it, and copy the "dload" folder (without unpacking it!) to the SD card.
Press and hold both volume buttons + Power ("three buttons combo") .
-Alf- said:
Download service ROM
https://androidhost.ru/Y0n
Unpack it, and copy the "dload" folder (without unpacking it!) to the SD card.
Press and hold both volume buttons + Power ("three buttons combo") .
Click to expand...
Click to collapse
Thanks, is there anything else i could try to recover my data first?
hoppi1337 said:
Thanks, is there anything else i could try to recover my data first?
Click to expand...
Click to collapse
Nope (AFAIK). Look here .
-Alf- said:
Nope (AFAIK). Look here .
Click to expand...
Click to collapse
Well that pretty much sucks. lol.
Still kinda my fault, should have made backups.
Don't even own a SD Card so i can't really try that what you mentioned above.
Most likely gonna buy another phone... :/
Is there anything i could do to prevent my data loss the next time?
also, thank you very much for helping me out that much.
hoppi1337 said:
Don't even own a SD Card so i can't really try that what you mentioned above.
Click to expand...
Click to collapse
You can use OTG flash instead of SD card.
hoppi1337 said:
Is there anything i could do to prevent my data loss the next time?
Click to expand...
Click to collapse
Back up to the cloud - 'Google Photos', for example.
-Alf- said:
Descargar ROM de servicio
https://androidhost.ru/Y0n
Descomprímalo y copie la carpeta "dload" (¡sin desempacarlo!) A la tarjeta SD.
Mantenga presionados ambos botones de volumen + Encendido ("combinación de tres botones").
Click to expand...
Click to collapse
Hello friend, I need urgent help, my huawei p20 lite lx1 c432 installed an update for playing with it, but then it tells me to unlock it. I try to install from sd dload and it always gives me an error that I am doing wrong thank you happy new year
itrisev said:
Hello friend, I need urgent help, my huawei p20 lite lx1 c432 installed an update for playing with it, but then it tells me to unlock it. I try to install from sd dload and it always gives me an error that I am doing wrong thank you happy new year
Click to expand...
Click to collapse
Could you describe in detail what you did?
install firmware sd dload and the phone starts but then does not allow progress as a firmware is installed from 0 thank you happy year.
-Alf- said:
Could you describe in detail what you did?
Click to expand...
Click to collapse
install firmware sd dload and the phone starts but then does not allow progress as a firmware is installed from 0 thank you happy year.
-Alf- said:
Could you describe in detail what you did?
Click to expand...
Click to collapse
Could I send a video of how the phone starts? Could you see its status and give me an idea of how to repair it?
itrisev said:
Could I send a video of how the phone starts? Could you see its status and give me an idea of how to repair it?
Click to expand...
Click to collapse
Sorry, but detailed info means:
- current model and build number (info from fastboot)
- which firmware you have installed + download link
itrisev said:
Could I send a video of how the phone starts?
Click to expand...
Click to collapse
Why not?
Hello It seems i have a quite similar problem here, You see i also have a Huawei P20 Lite (Ane-LX2) , seems to be stuck in bootloop (Shows green screen with blue and red boxes sometimes) , so i am trying the dload flash method by OTG. But i have a question,
I have no idea if dev options were enabled (not that i knew this was gonna happen)
I have frp lock and Phone locked
So Bootloader is also locked.
Will the dload method work with all that bunch of crap?
kozmet said:
Hello It seems i have a quite similar problem here, You see i also have a Huawei P20 Lite (Ane-LX2) , seems to be stuck in bootloop (Shows green screen with blue and red boxes sometimes) , so i am trying the dload flash method by OTG. But i have a question,
I have no idea if dev options were enabled (not that i knew this was gonna happen)
I have frp lock and Phone locked
So Bootloader is also locked.
Will the dload method work with all that bunch of crap?
Click to expand...
Click to collapse
Afaik it should work
developer options do not matter in this case but you'll need a SD card to store the update.app for the dload method to work
Related
P769 Not turning on ok had cm 10.2 on it then i attempted to install cwm.. didn't work ... thought maybe something went wrong then i was able to restore it with LG tool ... but now it doesn't power up i cant even go to SW mode .battery is full it sometimes turns on when i press the power if lucky...most of the time doesn't
i can say devices isn't dead when i plug it to pc without battery it does connect/disconnect unable to install fastboot drivers tho don't seem to work
someone enlighten me .
tawhid111 said:
P769 Not turning on ok had cm 10.2 on it then i attempted to install cwm.. didn't work ... thought maybe something went wrong then i was able to restore it with LG tool ... but now it doesn't power up i cant even go to SW mode .battery is full it sometimes turns on when i press the power if lucky...most of the time doesn't
i can say devices isn't dead when i plug it to pc without battery it does connect/disconnect unable to install fastboot drivers tho don't seem to work
someone enlighten me .
Click to expand...
Click to collapse
you need to start from the very beginning: First install omap4boot and then use Lelus tool to install x and u boot then put the phone in fastboot mode. Then you should be able to s/w upgrade for offline fix.
Nathan.7118391 said:
you need to start from the very beginning: First install omap4boot and then use Lelus tool to install x and u boot then put the phone in fastboot mode. Then you should be able to s/w upgrade for offline fix.
Click to expand...
Click to collapse
cant seem to install the drivers for omap4boot on win 8 :|
tawhid111 said:
cant seem to install the drivers for omap4boot on win 8 :|
Click to expand...
Click to collapse
Have you tried running as admin?
Nathan.7118391 said:
you need to start from the very beginning: First install omap4boot and then use Lelus tool to install x and u boot then put the phone in fastboot mode. Then you should be able to s/w upgrade for offline fix.
Click to expand...
Click to collapse
Nathan.7118391 said:
Have you tried running as admin?
Click to expand...
Click to collapse
yeah once i plug the usb it does connect/disconect but cant install the driver am i forgetting something ?
tawhid111 said:
yeah once i plug the usb it does connect/disconect but cant install the driver am i forgetting something ?
Click to expand...
Click to collapse
I hate Windows 8! Um. . let's see, why don't you try to turn your phone off and plug in the phone with the battery out.
EDIT: http://www.youtube.com/watch?v=yRggtyNnxtI
Nathan.7118391 said:
I hate Windows 8! Um. . let's see, why don't you try to turn your phone off and plug in the phone with the battery out.
Click to expand...
Click to collapse
screen does not go on but if i remove the battery and plug the usb omap4boot do show up on device manager but cannot procede further
tawhid111 said:
screen does not go on but if i remove the battery and plug the usb omap4boot do show up on device manager but cannot procede further
Click to expand...
Click to collapse
i was able to flash it with lg tool..after that it doesnt go back on going to install win7 n try it again
was able to fastboot with windows 7 what should i do next ?
tried flashing u and x to see if i can get S/W to work no go maybe the one with the zip is not for P769 :/
tried flashing cwm and i get a error :/
Code:
C:\Users\Acer\Desktop\fastboot\bin>fastboot flash recovery cwmtouch.img
sending 'recovery' (6796 KB)...
OKAY [ 3.479s]
writing 'recovery'...
FAILED (remote: partition does not exist)
finished. total time: 3.494s
what do i do now ? any idea guys
tawhid111 said:
was able to fastboot with windows 7 what should i do next ?
tried flashing u and x to see if i can get S/W to work no go maybe the one with the zip is not for P769 :/
tried flashing cwm and i get a error :/
Code:
C:\Users\Acer\Desktop\fastboot\bin>fastboot flash recovery cwmtouch.img
sending 'recovery' (6796 KB)...
OKAY [ 3.479s]
writing 'recovery'...
FAILED (remote: partition does not exist)
finished. total time: 3.494s
what do i do now ? any idea guys
Click to expand...
Click to collapse
Did you use Lelus' fastboot to flash u-boot / x-loader? There is P769 ICS version in that script.
Did you try to use LG mobile support tool to recover your phone?
artit said:
Did you use Lelus' fastboot to flash u-boot / x-loader? There is P769 ICS version in that script.
Did you try to use LG mobile support tool to recover your phone?
Click to expand...
Click to collapse
yes thats the one i have from this thread right ?
http://forum.xda-developers.com/showthread.php?t=2292828
it seems to flash the x and u but then when remove battery... i hold vol+ and plug in the usb it does not boot to S/W ? keeps connecting and disconnecting
tawhid111 said:
yes thats the one i have from this thread right ?
http://forum.xda-developers.com/showthread.php?t=2292828
it seems to flash the x and u but then when remove battery... i hold vol+ and plug in the usb it does not boot to S/W ? keeps connecting and disconnecting
Click to expand...
Click to collapse
Maybe it's a hardware problem. Did you try all usb port on your computer?
artit said:
Maybe it's a hardware problem. Did you try all usb port on your computer?
Click to expand...
Click to collapse
yes i have i can fastboot just fine no problem with fastboot
what are the key combo to enter S/W i seem to get
FAILED (remote: partition does not exist) flashing u and x
tawhid111 said:
yes i have i can fastboot just fine no problem with fastboot
what are the key combo to enter S/W i seem to get
FAILED (remote: partition does not exist) flashing u and x
Click to expand...
Click to collapse
Sorry, it seem a nand partition problem and all of people that have this problem cannot solve it.
Refer to
http://forum.xda-developers.com/showthread.php?t=2322454
http://forum.xda-developers.com/showthread.php?t=2331408
artit said:
Sorry, it seem a nand partition problem and all of people that have this problem cannot solve it.
Refer to
http://forum.xda-developers.com/showthread.php?t=2322454
http://forum.xda-developers.com/showthread.php?t=2331408
Click to expand...
Click to collapse
i was playing with some different sequence and was able to get to s/w the it shut off :/ i think its a bad emmc
edit
this seem to work combination to get into S/W!!!!!!
while running the fastboot lelus script hold the vol + button s/w will show up ....im still testing !ol+
While running the script select fastboot hold the vol + button and immediately put the battery back and close the script(lelus) in ! will boot into S/W and LG device does pick it up now i need to charge the battery :| will report back if everything goes well
That won't work because you should have inverted sw upgrade mode which means you don't have enough time before the fastball ends. Crossing my fingers for you
P769v20h- 'tis the season to give thanks so push the button already!
Nathan.7118391 said:
That won't work because you should have inverted sw upgrade mode which means you don't have enough time before the fastball ends. Crossing my fingers for you
P769v20h- 'tis the season to give thanks so push the button already!
Click to expand...
Click to collapse
it worked for me .i do get a inverted sw upgrade mode kdz or the lg support tool picks it up just fine as i cant charge the battery .but its definitely can be revived this way . why does fastboot last only 1 min for this phone tho ?
Were you able to flash it back? Fastboot is only for a few minutes because it's not real fastboot. This is only a mock program that will help temporarily. I don't think you can flash the full ROM with this tool but if you can more power to you!
P769v20h- 'tis the season to give thanks so push the button already!
Hello,
Two days ago when I woke up my P6 suddenly didn't boot up anymore.
It's getting stuck on the fist boot screen where it says: Huawei Ascend.
I searched for a solution and tried the following things:
-Tried to get into recovery mode by pressing on/off+vol up, on/off+vol down, on/off+vol up+vol down.. Nothing helps, it turns on and off and shows the same screen again.
-Connected it to the PC, and the p6 is recognized as: Android sooner single ADB interface.
-Downloaded and installed this: http://forum.xda-developers.com/showthread.php?p=48915118#post48915118
-Tried this: http://forum.xda-developers.com/showpost.php?p=45106541&postcount=11
-I also put Update.app in the dload folder of my SD card. (I downloaded the file from the Huawei website and used a cardreader to get it on the SD card)
Nothing helps
Can somebody please help me ?
Thanks!
Flash your device with stock Rom.
Salman Al-Badgail said:
Flash your device with stock Rom.
Click to expand...
Click to collapse
How do I do that when I can't access my phone?
It doesn't go past the first bootscreen at all.
I tried this:
C:\adb>fastboot flash recovery recovery_original_flashable.img
target reported max download size of 838860800 bytes
sending 'recovery' (7804 KB)...
OKAY [ 0.334s]
writing 'recovery'...
(bootloader) OKAY
FAILED (remote: verify failure, ErrNo:8)
finished. total time: 1.519s
It failed, I don't know what error 8 means..
You are having just a bootloop,
Salman Al-Badgail said:
You are having just a bootloop,
Click to expand...
Click to collapse
Yes, can you help me fix it?
I'm a noob at this, so I can use a little more help than saying what it is.
Thanks
Can somebody help?
Allow me some time to find USB drivers, Stock ROM and Flashing Tool for you.
Please Check your Device
Huawei Ascend P6
Please let me know your Previous Android Version.
Be specific with your answer so that I could help you.
Please Check Here
H-A-6
XDA HA6
Check HERE TOO
Still having problem please post it here
NOTE I am not responsible if you made it Hard Brick. Try it on your own
Salman Al-Badgail said:
Allow me some time to find USB drivers, Stock ROM and Flashing Tool for you.
Please Check your Device
Huawei Ascend P6
Please let me know your Previous Android Version.
Be specific with your answer so that I could help you.
Please Check Here
H-A-6
XDA HA6
Check HERE TOO
Still having problem please post it here
NOTE I am not responsible if you made it Hard Brick. Try it on your own
Click to expand...
Click to collapse
Hi
I can't get into recovery, I get errors using fastboot.
dload folder with the firmware in it doesn't do much either.
The other link you sent there is a program; Spreadtrum Upgrade Tool that needs .pac files, I don't know what that is.
Fastboot can see the device, but it cant flash the recovery?
C:\adb>fastboot devices
????????b?b?Û?§?b???????b?b?§?Ý???b?b?????b???b?b fastboot
C:\adb>fastboot flash recovery recovery_original_flashable.img
target reported max download size of 838860800 bytes
sending 'recovery' (7804 KB)...
OKAY [ 0.349s]
writing 'recovery'...
(bootloader) OKAY
FAILED (remote: verify failure, ErrNo:8)
finished. total time: 1.536s
C:\adb>
Try posting your problem here.
http://forum.xda-developers.com/showthread.php?t=2259645
Salman Al-Badgail said:
Try posting your problem here.
http://forum.xda-developers.com/showthread.php?t=2259645
Click to expand...
Click to collapse
OK, I did, thanks
Never mind, I bought a new phone..
----------------EDIT --- GOT IT FIXED--- READ FIRST 4 PAGES OF THE THREAD----------------------- BACK TO STOCK <3 XDA
Hello, I used relock bootloader command in fastboot.... now the phone only restarts to "ERROR MODE"
It looks like that
"ERROR MODE"
Attention!
Please Update system again.
[Green Android]
Error!
Func NO : 11 (reovery image)
Error NO : 2 (load failed!)
--------------------------------------
Anybody can help me? When I restart phone this mode appears again and again, can't enter fastboot mode or recovery.. when pressing any key it restarts to this error mode...
Also phone can't be tunred off, when hard pressing POWER it will instantly reboot to this mode.
Phone doesn't show up in device manager... when doing anything via fastboot command only waiting for device...
-----------------
Can you boot into fastboot mode? is bootloader and frp unlocked?
RobertHarkness said:
Can you boot into fastboot mode? is bootloader and frp unlocked?
Click to expand...
Click to collapse
no
... it was unlocked.. than i used relock command in fastboot mode and endet here....
If you can't boot into fastboot mode then your going to have to contact huawei. Without fastboot your phones hard bricked mate
RobertHarkness said:
If you can't boot into fastboot mode then your going to have to contact huawei. Without fastboot your phones hard bricked mate
Click to expand...
Click to collapse
Ok... that sucks...
Rommco05 said:
Probably if u see this are u already in fastboot try when shows this screen plug cable to pc and write in adb >>>> fastboot devices
Attention!
Please Update system again.
[Green Android]
Error!
Func NO : 11 (reovery image)
Error NO : 2 (load failed!)
edit: ok now I see... waiting for device
---------- Post added at 07:49 ---------- Previous post was at 07:26 ----------
How happend this situation, what u do before relock bootloader?
Click to expand...
Click to collapse
The smartphone doesn't show up in adb-devices... Also dodn't see it in USB... before I did this it worked without problems.
The situation before... everything worked normal and I restarted to fastboot and tried to relock bootloader with oem relock bootloader command... after that command phone turned off and the looping error appeared... tried various button combinations also vol down + usb plugin ... but only this mode appears... also I cant turn smartphone off it restarts and restarts and restarts to this mode...
Rommco05 said:
Probably this phone need service. When u relock bootloader u have twrp or stock recovery and which system was in phone?
Click to expand...
Click to collapse
Before I did this command I had the chinese TWRP installed and Stock Rom... since the relock command doesn't delete anything of these things I think it is still here I think.... but I can't access it ...thats the problem and since the error mode doesn't start an usb-connection to Computer I can't use adb/fastboot... Thx for help guys
Rommco05 said:
Isn't good idea relock bootloader with twrp, if u want do relock always with stock recovery... :/
Click to expand...
Click to collapse
Yes was stupid idea... help would be still appreciated... Anybody know where I must send the smartphone to to repair it? (Europe/Germany)
UPDATE!!!
----I UNLOADED THE BATTERY TO 0 % NOW SO SMARTPHONE TURNED OFF----
------>CONNECTED AND RESTARTED MULTIPLE TIMES WITH USB CABLE AND BUTTON PRESSING------
------------------------>>>>AFTER 50 TRYS I AM IN FASTBOOT MODE<<<<------------------------------
WHAT DO NOW?
fastbootmessages:
PHONE Relocked
FRP Lock
When try to flash boot img via adb I get Error
target reported max download size of 471859200 bytes
sending 'boot' (32768 KB)...
OKAY [ 0.717s]
writing 'boot'...
FAILED (remote: Command not allowed)
finished. total time: 0.728s
Rommco05 said:
I think you need to unlock booloader and after flash all imgs
fastboot flash boot boot.img
fastboot flash bootloader bootloader.img
fastboot flash recovery recovery.img
fastboot flash system system.img
fastboot flash vendor vendor.img
im not sure if is this right order
Click to expand...
Click to collapse
Great!
But now next problem... when I unlock Bootloader I will need my Unlock code from Huawei Site... but can only access if if I have Model Nr (Which can be obtained only in Android) and Serial Number (Also only viewable in Android).... I have both IMEIS on the Back of my phone.... any ideas how to obtain without boot to android?
4r44444 said:
Great!
But now next problem... when I unlock Bootloader I will need my Unlock code from Huawei Site... but can only access if if I have Model Nr (Which can be obtained only in Android) and Serial Number (Also only viewable in Android).... I have both IMEIS on the Back of my phone.... any ideas how to obtain without boot to android?
Click to expand...
Click to collapse
You won't be able to unlock bootloader even if you have unlock code because of FRP. The only option is to use the DC Phoenix which uses some kind of backdoor - belive me, been there done that.
OK but maybe I can try... obtained my Serial via DC Phoenix... now only need the Product Idea when Dialing *#*#1357946#*#*. .... anybody can tell me please? :3
4r44444 said:
OK but maybe I can try... obtained my Serial via DC Phoenix... now only need the Product Idea when Dialing *#*#1357946#*#*. .... anybody can tell me please? :3
Click to expand...
Click to collapse
Not possible, you'll again need some program to directly read the bootloader code. What happened to your old one, it's always the same ?
Rommco05 said:
check here first post https://forum.xda-developers.com/p9/help/how-to-product-id-bricked-p9-t3561156
Click to expand...
Click to collapse
This is an old program, doesn't support Honor 9...
Rommco05 said:
He use it for Huawei P9, isnt id and serial on box?
Click to expand...
Click to collapse
Isn't this thread about bricked Honor 9? On the box of Honor 9 is everything except ID. Anyway, I found a newer version of the program, he can give it a try.
Ok got everything... but all time I try this Error appears in fastboot:
FAILED (remote: Command not allowed)
----------------------------------------------------
I tried to Unlock via DCPhoenix (Bought for 20 €)... it sayed it got unlocked but FRP is still locked..
"Phone Relocked"
"FRP Lock"
In Fastboot..
Rommco05 said:
Have you installed drivers (HiSuite)?
Click to expand...
Click to collapse
Yes... restore via it doesn't work.. "Your device is not supported" Error when using rescue mode.
So I think the main problem is now I can't do anything on fastboot because Bootloader is relocked (Also OEM-Unlock isnt activated in [email protected]).... So I think the only thing I can restore my 400€ Phone is to backdoor unlock it.... DC-Phoenix without success. any ideas from the real pros? Would pay 50€ if your method would work to restore my phone :/
Rommco05 said:
No no, just for drivers for communicating phone and pc. I think is some way how push imgs without unlocked bootloader
I'm not sure if is for this topic https://forum.xda-developers.com/an...stion-mounting-recover-partition-adb-t3591261
edit: I don't want money anyway...
Click to expand...
Click to collapse
Ok... I have to go to work now... will try later... I will read other posts later thank you all for help!!!!!!!!
4r44444 said:
Ok... I have to go to work now... will try later... I will read other posts later thank you all for help!!!!!!!!
Click to expand...
Click to collapse
Use this tutorial, it should work. Does it show you any error ?
https://www.dc-unlocker.com/repair-bricked-huawei-honor-7
Greetings…
W̶i̶l̶l̶ ̶d̶o̶n̶a̶t̶e̶ ̶2̶0̶ ̶U̶S̶D̶ ̶t̶o̶ ̶w̶h̶o̶e̶v̶e̶r̶ ̶c̶a̶n̶ ̶f̶i̶x̶ ̶m̶y̶ ̶p̶h̶o̶n̶e̶ Fixed and contacted both Bordo_Bereli51 and Ante0.
My Huawei Mate 10 got in a bootloop after installing Xposed Framework
It was on Android Oreo 8.0 rooted and bootloader unlocked
Lock state info:
FB LockState: LOCKED
USER LockState: UNLOCKED
Leaving the device to boot normally: HUAWEI logo then reboots.
Vol up+power: eRecovery mode … doesn’t work (wiped data and cache .. tried to download firmware through wifi .. nothing works). ... then tried this method it worked while downloading the firmware .. but after verifying the firmware then installing it when it gets from 0% to 1% it fails and a red exclamation mark appears. :crying:
Vol down + power: fastboot: always get: FAILED (remote: Command not allowed) ). even though the bootloader is supposed to be unlocked. :crying:
Vol up and down: download mode .. on USB: stuck at 5% … without USB connection to computer: nothing happens (a red exclamation mark appears).
The device has an SD card slot: I tried placing the UPDATE.APP in dload folder and pressed both volume buttons but nothing appeared .. did I do something incorrectly?
Here are more info:
product-model: ALP-L29
vendorcountry: hw/meafnaf
build-number: System 8.0.0.38(0310)
fastboot getvar rescue_enter_recovery
getvar:rescue_enter_recovery FAILED (remote: FAIL:need all image flashed!)
fastboot oem oeminforead-SYSTEM_VERSION
...
(bootloader) :ALP-L29 8.0.0.128(C185)
Please help.
thanks in advance
====================
FIXED: Thanks to Bordo_Bereli51 who wrote this post and thanks for Ante0 for recommending DC Pheonix and for taking a lot of his time explaining a lot of things to me privately. contacted both as promised.
How I fixed it (credits to Bordo_Bereli51 for the guide .. I only modified it a bit and added some info from my experience):
1- I purchased a 19 euro -3 days pass for DC Pheonix.
2- Download Firmware Finder and click the "Common Base" tab, then download a FullOTA-MF firmware (all 3 files) which is approved for installation ( I copied the "changelog" link and pasted it in the 6th icon at the top "Firmware Checker" and it returned "Firmware approved for install" I' was not able to repack other non approved firmwares).
3- extract UPDATE.APP from update.zip
4- run DC Phoenix program .. tap the "Standard" button in Update mode .. select "update" and choose the UPDATE.APP you just extracted.
5- let it flash everything successfully then redo step 4 again.
6- Here's the trick before it flashes anything ... as soon as you see "utilizing backdoor" (or something like that) open Task Manager and force close DC Phoenix (it has to be BEFORE flashing anything, otherwise you might get errors like:
"error: exec '/system/bin/sh' failed: No such file or directory"
and AFTER utilizing backdoor (so you can use fastboot commands)
7-Download HWOTA8_Mate10 , place the 3 files you downloaded in step 2 in the "repack" folder, and rename "update_data_full_public.zip" to "update_data_public.zip" and "update_full_*ALP-L29*_hw_*meafnaf*.zip" to "update_all_hw.zip". Then run "repack.bat" and wait for it to finish.
8- run "ota.bat" in "ota" folder.
9- When it flashes the recovery_ramdisk and kernel plug your usb cable out and Reboot to recovery by pressing volume up + power button
10- When the phone is in recovery now ADB works (in case you need to do things manually).
11- When this process also finishes, the command center will tell you to press enter, so it boots to erecovery, which will flash the files.
12- Now your phone is unbricked after the flash.
Do not forget to do factory reset by pressing again at boot: (power + volume up) and selecting (factory reset).
After boot allow (OEM Unlock) under (developer settings) or otherwise the FRP will still be locked but the phone will work.
if someone will fix it can u tell me cause i have the same problem
---------- Post added at 06:58 AM ---------- Previous post was at 06:58 AM ----------
wait do u have twrp?
Dolev234786 said:
if someone will fix it can u tell me cause i have the same problem
---------- Post added at 06:58 AM ---------- Previous post was at 06:58 AM ----------
wait do u have twrp?
Click to expand...
Click to collapse
I have the same problem.
Dolev234786 said:
if someone will fix it can u tell me cause i have the same problem
---------- Post added at 06:58 AM ---------- Previous post was at 06:58 AM ----------
wait do u have twrp?
Click to expand...
Click to collapse
No, I don’t have TWRP.
hero3210 said:
No, I don’t have TWRP.
Click to expand...
Click to collapse
What does fastboot mode say, unlocked on both phone and frp?
ante0 said:
What does fastboot mode say, unlocked on both phone and frp?
Click to expand...
Click to collapse
yes both are unlocked
Dolev234786 said:
yes both are unlocked
Click to expand...
Click to collapse
Post input & output when you try to flash using fastboot
ante0 said:
Post input & output when you try to flash using fastboot
Click to expand...
Click to collapse
My device used to be bootloader unlocked
But I always get "FAILED (remote: Command not allowed)" for any fastboot command
I searched here and a lot of people had the same issue and they fixed it by relocking then re-unlocking the bootloader
I tried that .. relocked successfully but now I cannot unlock it again.
This is the current info from info.bat:
Lock state info:
FB LockState: LOCKED
USER LockState: RELOCKED
in fastboot mode it says:
PHONE Relocked
FRP Lock
=====
Input and output of fastboot:
fastboot flash recovery_ramdisk SYSTEM.img
target reported max download size of 471859200 bytes
sending sparse 'recovery_ramdisk' 1/7 (460797 KB)...
OKAY [ 3.650s]
writing 'recovery_ramdisk' 1/7...
FAILED (remote: Command not allowed)
finished. total time: 3.661s
Thanks for taking time to reply
hero3210 said:
My device used to be bootloader unlocked
But I always get "FAILED (remote: Command not allowed)" for any fastboot command
I searched here and a lot of people had the same issue and they fixed it by relocking then re-unlocking the bootloader
I tried that .. relocked successfully but now I cannot unlock it again.
This is the current info from info.bat:
Lock state info:
FB LockState: LOCKED
USER LockState: RELOCKED
in fastboot mode it says:
PHONE Relocked
FRP Lock
=====
Input and output of fastboot:
fastboot flash recovery_ramdisk SYSTEM.img
target reported max download size of 471859200 bytes
sending sparse 'recovery_ramdisk' 1/7 (460797 KB)...
OKAY [ 3.650s]
writing 'recovery_ramdisk' 1/7...
FAILED (remote: Command not allowed)
finished. total time: 3.661s
Thanks for taking time to reply
Click to expand...
Click to collapse
You need to enable OEM unlock in Settings-developer options. At least frp needs to say unlock else you won't be able to unlock or flash, at least not for free.
But since you can't boot you're pretty much limited to use dc unlocker/dc phoenix
ante0 said:
You need to enable OEM unlock in Settings-developer options. At least frp needs to say unlock else you won't be able to unlock or flash, at least not for free.
But since you can't boot you're pretty much limited to use dc unlocker/dc phoenix
Click to expand...
Click to collapse
Thanks for the reply
Do you recommend that I use dc unlocker or dc pheonix or FunkyHuawei?
do you recommend that I use dc unlocker or dc pheonix or FunkyHuawei?
hero3210 said:
Thanks for the reply
Do you recommend that I use dc unlocker or dc pheonix or FunkyHuawei?
Click to expand...
Click to collapse
Dc phoenix is what you'll need, Mate 10 is not supported in DC Unlocker. (Though DC Unlocker made DC Phoenix)
You'd just want it to flash stock anyway.
And it's cheaper than FunkyHuawei... FH "only" cost 1 credit to flash, but minimum to buy is 5 credits which is $41.
FH is easier though as you'd only need to setup DNS, but it's up to you
HCU/DC Phoenix pass for 3 days is €19, and then you have unlimited usage.
If you need further help you can find me at the telegram group https://t.me/HuaweiMate
as it's easier to do it live than through messages.
There is a "DC Phoenix repair tutorial" if you google it, use Method 1. Basically you just download the firmware update zip you're on now (and hw data zip) from http://pro-teammt.ru/firmware-database/ then extract update.app from it and select it in Phoenix, then extract update.app from hw data zip and select it as customization.
Alternatively you can downgrade to factory build using images from DC Phoenix (the build your phone came with) then update from there when you have a booting phone.
Thank you sooo much man. I really appreciate your help.
What version of Xposed frameworks did you install I have beta 4 working fine on my mate 10 pro.
tokoam said:
What version of Xposed frameworks did you install I have beta 4 working fine on my mate 10 pro.
Click to expand...
Click to collapse
yeah the bootloop was fixed in beta4 (original comment by dev) which wasn't officially released to the channel when I installed it, so I didn't know about it until I got the bootloop.
Anyways, I just managed to fix my issue. I'll post about it now.
ante0 said:
What does fastboot mode say, unlocked on both phone and frp?
Click to expand...
Click to collapse
what would happens if it says unlock on frp? i cant load twrp i have flashed many times but i does not take it.
I bricked my Huawei Mate 10 too
Please help.. I also bricked my Huawei Mate 10 ALP-L29C636...
I installed the EMUI 9.0 on my device using the HWOTA8_Mate10 method which was successful. The EMUI 9.0 ROM was from FirmwareFinder: ROM version ALP-L29C636E2R1P8B108-log (9.0.0.108). I didn't have any issues at all but since Huawei Mate 10's EMUI 9.0 is still in Beta, I decided to switch back to the stable EMUI 8.0.
Here's where the problem started... Since I want to downgrade, I went ahead and downloaded the 3 needed files (update.zip, update_all_hw, update_data_public) from FirmwareFinder: ROM version ALP-L29C636B143 (8.0.0.143). I fired up HWOTA8_Mate10 and started the installation process. The first step was to boot to fast boot and then plug the device, after that, the software asked me to unplug the device and press volume+ and power button but the device won't boot to recovery anymore. The device is now stuck at "Your device is booting now..." I tried rebooting the device but it won't work. Tried to go to eRevovery to wipe cache/factory reset but it will go back to "Your device is booting now..." page. I tried reinstalling the recovery.img via fastboot and tried to boot to recovery mode again but it won't work anymore. I believe my device is now soft bricked . I can still boot to fastboot, I even tried fastboot flash system system.img which was successful but the device still won't boot. Please help how to recover my device. I think I went too far and now I don't know how to fix this issue.
Carnage! said:
Please help.. I also bricked my Huawei Mate 10 ALP-L29C636...
I installed the EMUI 9.0 on my device using the HWOTA8_Mate10 method which was successful. The EMUI 9.0 ROM was from FirmwareFinder: ROM version ALP-L29C636E2R1P8B108-log (9.0.0.108). I didn't have any issues at all but since Huawei Mate 10's EMUI 9.0 is still in Beta, I decided to switch back to the stable EMUI 8.0.
Here's where the problem started... Since I want to downgrade, I went ahead and downloaded the 3 needed files (update.zip, update_all_hw, update_data_public) from FirmwareFinder: ROM version ALP-L29C636B143 (8.0.0.143). I fired up HWOTA8_Mate10 and started the installation process. The first step was to boot to fast boot and then plug the device, after that, the software asked me to unplug the device and press volume+ and power button but the device won't boot to recovery anymore. The device is now stuck at "Your device is booting now..." I tried rebooting the device but it won't work. Tried to go to eRevovery to wipe cache/factory reset but it will go back to "Your device is booting now..." page. I tried reinstalling the recovery.img via fastboot and tried to boot to recovery mode again but it won't work anymore. I believe my device is now soft bricked . I can still boot to fastboot, I even tried fastboot flash system system.img which was successful but the device still won't boot. Please help how to recover my device. I think I went too far and now I don't know how to fix this issue.
Click to expand...
Click to collapse
Spamming every thread won't help you fix your issue.
Pretoriano80 said:
Spamming every thread won't help you fix your issue.
Click to expand...
Click to collapse
I apologize. I panicked since I don't know what to do. I will continue on the thread which I received a response.
Hello guys,
I've recently got my hands on a not-working P20 Lite, which was stuck on boot with the well-known "your device has failed verification and may not work properly" error message. Since I got stuck on a HUAWEI logo when trying to enter the recovery, ended up in a bootloop trying to enter the download mode, the only way to get the phone working was fastboot. And since I am writing this post, yeah, y'all guessing correctly, it has not been successful. (Error message 'Command not allowed')
After giving up on it and leaving it stuck on the HUAWEI logo for a while, I have noticed that it has turned off. After turning on the device, it shows a green screen with 2, red and blue squares (see attached image), still not being able to boot in recovery mode, however fastboot still somehow manages to fire up.
Any suggestions? Is this phone dead (which I honestly believe), or is there something that would possibly be able to change its state?
Thanks!
EnterPaulini said:
your device has failed verification and may not work properly"
Click to expand...
Click to collapse
EnterPaulini said:
it shows a green screen with 2, red and blue squares
Click to expand...
Click to collapse
Wrong region (oeminfo).
EnterPaulini said:
Is this phone dead?
Click to expand...
Click to collapse
No, not dead yet
Need more information about your phone . Install on your PC "Minimal ADB and fastboot" tool .
In fastboot mode run commands:
fastboot oem get-build-number
fastboot oem get-product-model
fastboot getvar vendorcountry
fastboot oem oeminforead-CUSTOM_VERSION
fastboot oem oeminforead-SYSTEM_VERSION
fastboot oem battery_present_check
and post the results please.
(First try to charge the phone).
(bootloader) :ANE-LX1 9.1.0.372(C432E7R1P7)
(bootloader) ANE-LX1
vendorcountry: hw/eu
(bootloader) :ANE-LX1-CUST 9.1.0.7(C432)
(bootloader) :ANE-LX1 9.1.0.132(C432E5R1P7)
(bootloader) 3426mv
Thanks!
Okay, try this way out...
1. in fastboot mode run command
fastboot erase userdata
and try restart the device.
2. download and use a Service ROM
https://androidhost.ru/2AVi
with an sd/card or an USB-OTG flashdrive in dload mode. Unpack .zip archive , find dload file in "Software" folder, and simply transfer it to the SD card, without unpacking it! (instruction can be found in ReleaseDoc folder).
Turn off your phone and flash FW using three button combo .(Power+Vol.Up+VolDown).
-Alf- said:
Okay, try this way out...
Click to expand...
Click to collapse
Still hanging in there! Entering the dload mode does not work, I always land on the same green screen and it shuts down.
EDIT:
Back to the "Your device has failed verification and may not work properly" screen. It actually shows the HUAWEI logo again and shows that the device is charging, when turned off. Trying to enter the dload mode results in a bootloop.
EDIT2:
After few times of trying to enter the dload mode I am stuck with the green screen again. From what I have observed, the green screen does not come up when I am connected with the USB cable. When not, everything except fastboot leads to the green screen with a small LED diode blinking red (not so familiar with this phone, no idea what's this for, it's located on the notch). On the other hand, everything except fastboot with cable connected leads to a bootloop. But at least I can see the HUAWEI logo, eh?
Paid service
But if it's a hardware problem (e.g. dead memory), it won't help you.
-Alf- said:
Paid service
But if it's a hardware problem (e.g. dead memory), it won't help you.
Click to expand...
Click to collapse
And if I tried this solution @kikson112 suggested? Doing something with that test point, could this end up working?
I can't help you, that's Greek to me... I have never used this method, nor dc-phoenix (thank goodness).
This happened to my ANE-LX1 a while ago, bootloader never unlocked and device was fully stock...
Device was still under warranty and huawei repaired it for free
Probably a hardware issue
Hey! I have the same problem now. From todays morning it has been stuck on the loading Huawei logo. I haven't got any messages about that warning, you have got, but I have tried to enter the recovery mode and sometimes, it just flashes that green screen with the two squares. Now I think is without power. Have you somehow started the phone?
AmaliaRepova said:
Hey! I have the same problem now. From todays morning it has been stuck on the loading Huawei logo. I haven't got any messages about that warning, you have got, but I have tried to enter the recovery mode and sometimes, it just flashes that green screen with the two squares. Now I think is without power. Have you somehow started the phone?
Click to expand...
Click to collapse
Hello,
some related links:
https://forum.xda-developers.com/t/...-blue-red-flag-fastboot.4339931/post-85697163