Has anyone got viper4android working on their N10?
Had issues with the drivers applying on GSI.
Using wavlet instead now.
First of all uninstall your current viper installation and any other mods installed. I used titanium backup to freeze both Dirac Audio Tuner app and Dirac Control Service. Not sure if this is needed but it may have helped. I installed Audio Modification Library and rebooted and installed Ainur Narsil both are in Magisk. Reboot again finally u install viper as well as the drivers. Reboot again then I uninstalled Ainur and of course reboot again. Then I figured out I had to enable Legacy mode for Viper to process anything at all so you'll probably have to do the same. I also installed Audio Compatibility patch since my Spotify wasn't processing. I rebooted and noticed intermittent audio stutter so I disabled Audio Modification Library and all is well now. Oh btw I'm using Viper 2.7.2.1 on Magisk.
Related
working beautifully and tested on CM12.1.
Also note that this works with viper4android too.
Original Thread
http://forum.xda-developers.com/android/apps-games/mod-maxxaudio-t3118983
download link
http://forum.xda-developers.com/devdb/project/dl/?id=12642
Enjoy!
Edit: for those who wants to know how to install it
1) download the file
2) place it in memory card
3) flash via custom recovery
Does it conflict with default audiofx? How to get this fully working without CM audiofx not interfering?
ujilraj said:
Does it conflict with default audiofx? How to get this fully working without CM audiofx not interfering?
Click to expand...
Click to collapse
This is a bit tricky to reply as i always remove audio fx and replace it with viper.
In theory it should work with audiofx too as it is working fine with viper
How did u remove audiofx completely?
I have a ViPER4AndroidFX apk file which asks me to install driver during installation. But on reboot, i still get audiofx option in musicFX option of poweramp.
i'm going to do the installation as follows. Correct me if i'm wrong.
1.
If i remove the audiofx app using titanium backup, will it remove the whole audiofx from the rom? I want to remove audio fx completely.
2.
After that, i should flash the MaxxAudio - 64Bit zip from recovery.
3.
Reboot & install ViPER4AndroidFX apk & do steps as viper demands.
4.
All should be working.
How to check whether MaxxAudio - 64Bit & ViPER4AndroidFX are working? Where can it be verified?
I know it's lots of qt's, but i'm taking it as a precaution & also want to get fidelity at it's best
ujilraj said:
How did u remove audiofx completely?
I have a ViPER4AndroidFX apk file which asks me to install driver during installation. But on reboot, i still get audiofx option in musicFX option of poweramp.
i'm going to do the installation as follows. Correct me if i'm wrong.
1.
If i remove the audiofx app using titanium backup, will it remove the whole audiofx from the rom? I want to remove audio fx completely.
2.
After that, i should flash the MaxxAudio - 64Bit zip from recovery.
3.
Reboot & install ViPER4AndroidFX apk & do steps as viper demands.
4.
All should be working.
How to check whether MaxxAudio - 64Bit & ViPER4AndroidFX are working? Where can it be verified?
I know it's lots of qt's, but i'm taking it as a precaution & also want to get fidelity at it's best
Click to expand...
Click to collapse
i have this viper installer that always removes audiofx automatically. after that its as easy as flashing the zip.
once inside maxxaudio... adjust to your liking while listening to music. it also has an on off switch where you can verify its working. enjoy!
Sup people. This guide is adapted from this one
First and foremost, I'd recommend that anyone who uses magisk installs this module
1. Freeze any other audioFX, musixFX, dolby service etc using titanium backup
2. Rename /system/ect/audio_policy.conf to audio_policy.conf.bak
3. Install Selinux permissive script thru magisk
4. Install busybox thru magisk or play store
5. Install v4a thru magisk repo or here. (IF not installed thru magisk, you must install it as a system app. Do this by moving it to /system/app and setting permissions to rw-r--r--)
6. Reboot
Profit
ARISE Magnum Opus works fine. No need to do all this stuff
Wahoux said:
ARISE Magnum Opus works fine. No need to do all this stuff
Click to expand...
Click to collapse
Bro, Arise Magnum Opus is an app?
Does it actually process though? That's been my big issue is viper says it is supported but never processing. Been that way ever since like Android 6 for me. Hit or miss processing. (never worked over a USB DAC). Does it process through the headphones with the dongle?
Edit: I installed the Arise Magnum Opus version of Viper.
It's a bit complicated. More than the standard flash a zip and have it work. But I got it working now. And processing through the DAC. My issue was it not processing GPM streams. Arise has a toggle for deep buffer for streaming that had to be turned off.
Installing V4A via Magisk v18 installs but then when run & checking the driver status on V4A it says "Abnormal" which does not let you use the enhancements at all to tweak your audio. Any help on this or if anyone has installed it fine or not?
Yea I had that happen as well. Not sure if this is what fixed it, but try installing busybox. if that doesn't fix it, leave busybox installed, and uninstall viper and reinstall from magisk. I choose 2.5.0.5 material theme. I also got xHifi working in a stacked sorta config, great for a speaker specific profile.
If its still not working, keep playing with it, it will eventually
bbmaster123 said:
Yea I had that happen as well. Not sure if this is what fixed it, but try installing busybox. if that doesn't fix it, leave busybox installed, and uninstall viper and reinstall from magisk. I choose 2.5.0.5 material theme. I also got xHifi working in a stacked sorta config, great for a speaker specific profile.
If its still not working, keep playing with it, it will eventually
Click to expand...
Click to collapse
Can you be more detailed please? I installed busybox but still not working at all.
acetrainerjason said:
Can you be more detailed please? I installed busybox but still not working at all.
Click to expand...
Click to collapse
answered the same question here https://forum.xda-developers.com/showpost.php?p=78881460&postcount=13
Did anyone have luck installing V4A on their phone through magisk? It doesn't work for me no matter if i also install Audio Modification Library or another version of V4A.
Has anybody been able to install viper4Android on their moto g power? I can't seem to get the driver to install.
rafe83 said:
Has anybody been able to install viper4Android on their moto g power? I can't seem to get the driver to install.
Click to expand...
Click to collapse
I got it to install on Omni 11 but it doesn't work, sadly. Also a HUGE drain on the battery just having it installed. I'd say just stick with the built-in dolby stuff. Works better than I expected, although I do prefer V4A when it comes to headphones and sound systems.
Oh wow. That's a bummer. Viper4android is one of the main reasons why I still root my phones. The combination of dolby and viper on my OnePlus 7 pro is amazing.
yes it works and it works as intended. Complete the following steps to get it working and installed correctly. First you must download and install through magisk manager the audio compatibility patch (acp) after that install the newly updated viper4android zip from magisk as well and after it's done don't reboot just open the viperapp grant it super user permissions then it will install drivers and reboot automatically. Once booted back up your viper should be working normally
Ljrouse5 said:
yes it works and it works as intended. Complete the following steps to get it working and installed correctly. First you must download and install through magisk manager the audio compatibility patch (acp) after that install the newly updated viper4android zip from magisk as well and after it's done don't reboot just open the viperapp grant it super user permissions then it will install drivers and reboot automatically. Once booted back up your viper should be working normally
Click to expand...
Click to collapse
Unfortunately doesn't work for me. I'm on RR OS and tried numerous methods including the one you mentioned and it still keeps asking to install the driver again and again.. .