Related
Hi all,
I searched quite a lot, but seems to me not nearly enough. I've been using adb on my Windows 7 machine for a while now, but would like to have adb at work on my Ubuntu 11.04 machine where I am going to start some boring development.
I have installed the sdk and eclipse and and and (if it is important WHAT I installed more than this, I will elaborate)
lsusb returns
Code:
Bus 002 Device 009: ID 04e8:689e Samsung Electronics Co., Ltd
so I have set my
/etc/udev/rules.d/51-android.rules
to reflect like this:
Code:
SUBSYSTEM=="usb",ATTRS{idVendor}=="04e8",ATTRS{idProduct}=="689e",SYMLINK+="android_adb",MODE="0666
I'm kinda hoping this is wrong and there is an easy fix that I can laugh about.
When I have the emulator running and my phone plugged in
Code:
$sudo adb devices
returns a blank line and something about an emulator, only emulator running yields no blank line and only phone plugged in yields a nice and quiet blank line.
I had this on Windows as well when I struggled with drivers, but the CD sorted it out. I read that the necessary drivers comes with the SDK, but I might be wrong.
I have tried different tutorials and different values for the idProduct and idVendor as some tutorials claim they should be kept constant and not vary per phone... I restarted adb each time I made a change with
Code:
$sudo adb kill-server; sudo adb start-server; sudo adb devices
I'm currently running FirstUA v1.2 if that changes anything.
If you need more info, don't hesitate to ask, I know it's easier to solve problems with the right info (coming from an IT helpdesk).
Digi.Gram said:
Hi all,
I searched quite a lot, but seems to me not nearly enough. I've been using adb on my Windows 7 machine for a while now, but would like to have adb at work on my Ubuntu 11.04 machine where I am going to start some boring development.
I have installed the sdk and eclipse and and and (if it is important WHAT I installed more than this, I will elaborate)
lsusb returns
Code:
Bus 002 Device 009: ID 04e8:689e Samsung Electronics Co., Ltd
so I have set my
/etc/udev/rules.d/51-android.rules
to reflect like this:
Code:
SUBSYSTEM=="usb",ATTRS{idVendor}=="04e8",ATTRS{idProduct}=="689e",SYMLINK+="android_adb",MODE="0666
I'm kinda hoping this is wrong and there is an easy fix that I can laugh about.
When I have the emulator running and my phone plugged in
Code:
$sudo adb devices
returns a blank line and something about an emulator, only emulator running yields no blank line and only phone plugged in yields a nice and quiet blank line.
I had this on Windows as well when I struggled with drivers, but the CD sorted it out. I read that the necessary drivers comes with the SDK, but I might be wrong.
I have tried different tutorials and different values for the idProduct and idVendor as some tutorials claim they should be kept constant and not vary per phone... I restarted adb each time I made a change with
Code:
$sudo adb kill-server; sudo adb start-server; sudo adb devices
I'm currently running FirstUA v1.2 if that changes anything.
If you need more info, don't hesitate to ask, I know it's easier to solve problems with the right info (coming from an IT helpdesk).
Click to expand...
Click to collapse
The SDK Drivers are not for Galaxy Ace , Google for the drivers , they should be easy to find
Sent from my Ultma Weapon using XDA App
It seems that my problem begins with our Proxy server.... As the SDK manager and I had a quarrel about authentication, I downloaded some of the packages directly and forced the manger to use them instead of those on Google. With this, I accidentally downloaded an outdated adb, which had problems specifically with the Galaxy line of phones.... Downloading the correct package now, will see if it works better
Maybe I must just stop before I think of continuing I installed the newer r06 version, and my device is picked up, but now adb shell gives me this:
Code:
:~$ adb devices
List of devices attached
S58300c017faf device
:~$ adb shell
sh: applet not found
Any ideas where to look for the applet? Maybe I must continue tomorrow, new day new ideas.
Do you have Debugging turned on? And is the device rooted with Busybox? I assume yes since you're running a custom ROM but double checking.
If you're having trouble, I'd either: a) run a VM with XP SP3; b) head to the Android Q&A board here.
mmm, I never though of looking at that, since I figured they do say busybox is installed on this ROM, but thanx for nudging me into that direction, I found this post from ketut.kumajaya so I'm looking into that. Had some issues with not abling to get rw access, but my only problem there was a spelling error in the terminal.
I still get the error with the sh: applet not found, even after I tried the advice on that link. I tried installing all 3 versions shipped with BusyBox Installer on all 3 locations, still nothing. Just had an idea I'll try, if you invoke sh in linux you get a new shell, when I invoke sh I get the applet not found error. Maybe I should upgrade my sh or something. Worth a try
I am running a VM for the VB programming I do at work, but that doesn't have USB support (to much trouble to reinstall Virtual Box now just for USB support). Last night I tested on Windows 7 (first time since I started using this ROM) and it failed with the same error. I'm sure it's the sh that's broken or something. Will test on my wife's phone tonight (running the same ROM).
Thanx for your ideas so far. That's what I love about an online community, even if you don't exactly know what's wrong, people sling ideas around that nudge you in the right direction. One error message at a time
Solved thanx to Ketut
Thanx for all your help guys.
*****To all newebies(as quite a few new people are at this forum because they got their first device! (TFP)) any anyone who wants to learn, let’s get educated about our devices!*****
ADB (Android Debug Bridge) is an extremely useful tool that WILL help you in all of your customizing needs! You may see the need to use ADB commands to help root your device, change ROMS, or send your device a fix. Without the knowledge here, you could easily be left in the dark.
ADB is a necessity for developers and general consumers alike. Knowing this tool is a great advantage to you to help your device at the best quality possible.
Installation
Download Google SDK
Choose the correct operating system and install!
The installation REQUIRES Java JDK which can be downloaded from Here
If during installation it asks for JDK (and you have installed it) Press the back button and next again, sometimes that will fix the error.
**Note** The SDK installs to C:\Program Files (x86)\Android\android-sdk standard, chose any directory for you
Start the SDK and immediately, you will notice a few checkboxes. For the standard user, just make sure Android SDK Platform-tools (under Tools) and Google USB Driver package (under Extras) – the drivers are always good to have, latest ADB drviers.
Click install 2 packages and wait. Once installed go to your installation directory and find the platform-tools folder. This directory is your ADB and will be your lifeline!
**Do you want ADB accessible through any command prompt directory?**
You are in luck. (For Windows 7)
Right click on My Computer > Properties > Advanced System Settings >Advanced (Tab) > Environment Variables > Under System Variables scroll and dbl click on Path
TO THE END of the Variable value line add
Code:
;C:\Program Files (x86)\Android\android-sdk\platform-tools
Or whatever the directory you installed to + platform-tools
Open CMD and type ADB, if you did it right, you will see proper ADB jargon regardless if you are in the correct directory or not!
Congratulations! ADB is installed!
**Make sure your device is using the latest drivers (that you just downloaded) or other ADB drivers provided by ASUS to access ADB. When connected in Debugging mode, device manager will have: ASUS Android Composite ADB Interface**
ADB Usage
**I will be talking mainly about commands/arguments that the general end-user may use or come across**
**Make sure your tablet is in USB Debugging Mode to be able to connect to ADB (Settings > Applications)**
ADB Devices : This command shows all connected android devices that will respond to an ADB command. It is useful for making sure your device is connected.
ADB Connect [IPORT] : This command will connect to your device over personal WIFI connection if your device is setup for ADB over WIFI (Requires root and NOT recommended)
ADB Push [local_file] [remote_file] : This command will push any local file to the device (only if the device is Read/Writable. Stock /system/ folders are only Readable.
ADB Pull [Remote_file or Directory] [Save file or Directory] : This command take files or an entire directory and save it to your desired location. This command only works when directory is read/Writable.
ADB Shell [command] : This command will perform most UNIX commands on the device. Without a command, you can enter several shell commands before you ‘exit’. Most will not work unless SU is applied (# instead of $). Must be rooted for SU. Only play with these commands if they are known by you or exactly copied from instructions.
ADB Logcat [ > file.txt ] : This command will display (or save per > file.txt) a log of what’s happening on the device. If you are receiving errors, turn on logcat, reproduce error, turn off, and send logcat to the developer.
ADB Install [-r][-s] [local_apk] : This command force installs (or reinstalls –r or –s installs on SD-Card) any APK provided.
ADB Uninstall [-k] [APK_Name] : This command uninstalls any APK Name provided (app.apk) and will even keep cache and other data with the –k tag.
ADB start-server : This command will start the server if the server is off or killed. (Normally server will auto-start when ADB command is used)
ADB kill-server : This command will close ADB server. Useful if ADB server is acting up or not connecting to any devices.
ADB remount : This command will mounts the /system/ partition Read/Writable pending the device is allow to. Stock TFP will NOT.
ADB root : This command will restart ADB with root permissions if the build allows for it. Stock TFP will NOT.
ADB usb : This command will restart ADB on device to use USB connection for ADB communication.
ADB tcpip [port] : This command will restart ADB on device to use TCPIP connection for ADB. Standard port is 5555. Again, this connect not recommended for file transfers.
ADB reboot [recovery/bootloader] : This command will restart your device. If either of the two options are given, the device will boot into that mode (sadly TFP does not support the two options.. yet)
ADB Tips/Tricks
When following ADB instructions, follow them WORD-BY-WORD in the EXACT ORDER GIVEN. If copy and pasting their commands (one line at a time) makes it easier, then do so.
If you have root access, do not mess around in ADB shell unless you know what you are doing
Connecting over IP can be beneficial for you for quick ADB access, but for file transfers, speed is slow and you ALWAYS risk corruption (check the md5!) One bad file and you have boot-loops!
ADB Logcat is an amazing command. If anything is wrong with your device, 9/10 you can see it in logcat. If you can find the exact problem, fixes can happen much easier. USE LOGCAT TO YOUR ADVANTAGE!
ADB reboot can be a quick reboot, sometimes you don’t feel like waiting!
Use the environmental variables! It helps exponentially, and keeps from having multiple instances of ADB running.
When multiple instances of ADB are running (different directories) ADB can get messed up! (ADB not up-to-date restarts, and connect problems). ASUS Sync service has and ADB setup. Turn it off if you are not using it. Try to stick to only ONE instance of ADB
Eventually, we may have root access in our recovery kernel. Then and only then can our devices be truly customizable!
The GUIDE is not finite. Please post anything you feel should be added/corrected to the guide. Please take notice from this, as the understanding of these simple commands could help save your device(s)!
Thanks and 5 star would make me feel good inside too!
Wow... Nice post. Lots of time went into this lol. Thanks can't give the five stars in the app though:-(
Sent from my Transformer Prime TF201 using xda premium
The link in step #1 is whack - I think you want tis? http://developer.android.com/sdk/index.html
Lock-N-Load said:
The link in step #1 is whack - I think you want tis? http://developer.android.com/sdk/index.html
Click to expand...
Click to collapse
hmm thats what was in there, i re-saved and it works now ... maybe xda error
thanks tho!
biggem001 said:
hmm thats what was in there, i re-saved and it works now ... maybe xda error
thanks tho!
Click to expand...
Click to collapse
before you fixed it, it was trying to use this http://http://developer.android.com/sdk/index.html"
note the extra parens at the end and the double http call
i noticed that too, all i did was re-save and it worked. how weird.
Thanks! I've seen a few tutorials on this but this one was by far the easiest to follow and best organized. Short and sweet. Worked on my desktop great, I've never managed to install it right D:
Re posting to give 5 stars. Thanks again OP
Quick question: Is it normal for PTP mode to be required for adb to work? Because as soon as I switch to MTP I can no longer use adb.
cmat1120 said:
Quick question: Is it normal for PTP mode to be required for adb to work? Because as soon as I switch to MTP I can no longer use adb.
Click to expand...
Click to collapse
i can do either at once.. thats weird
GPS, Wifi and BT Testing
Could someone write some basic tutorials on how to verify/test GPS, wifi and BT funtions? For those of us who are new to Android it would helpful in verifying which problems are truly present. Also perhaps show how to find the serial number - for example: some don't know you have to click status - because there are a some erroneous posts out there. There may be users who assume something works or doesn't work, based on limited knowledge and these inaccurate findings only serve to muddy up the works.
There's a lot of animosity about the influx of newbies (and trust me, as a newbie it doesn't feel good). I think the first step is to educate. If some of these troubleshooting steps are laid out, more people can contribute in an intelligent way.
I thought this would be a good thread for the Guides thread, but it is closed and I cannot send PMs.
Thanks - Great Info
One thing you can add for all us amateurs is how to use ADB to install off market apps, stuff like that. Things the non-power user can benefit from. Some simple command line structure would be great.
theandies said:
One thing you can add for all us amateurs is how to use ADB to install off market apps, stuff like that. Things the non-power user can benefit from. Some simple command line structure would be great.
Click to expand...
Click to collapse
i wont add it to the guide, because adb install is pretty self explanatory but this
make sure you can install non-market apps
Code:
adb install app.apk
jonalisa said:
Could someone write some basic tutorials on how to verify/test GPS, wifi and BT funtions? For those of us who are new to Android it would helpful in verifying which problems are truly present. Also perhaps show how to find the serial number - for example: some don't know you have to click status - because there are a some erroneous posts out there. There may be users who assume something works or doesn't work, based on limited knowledge and these inaccurate findings only serve to muddy up the works.
There's a lot of animosity about the influx of newbies (and trust me, as a newbie it doesn't feel good). I think the first step is to educate. If some of these troubleshooting steps are laid out, more people can contribute in an intelligent way.
I thought this would be a good thread for the Guides thread, but it is closed and I cannot send PMs.
Click to expand...
Click to collapse
for GPS, use GPS Test app on the market
for BT and wifi testing, i'll just connect my device via BT or adhoc wifi and do the testing on my PC itself, more accurate and better programs
Excellent howto, thanks
I have trouble connecting to my prime with adb. In the Win7 Device Manager the correct device shows up, no exclamation mark at all, but adb just won't see the Prime.
USB debugging mode is on, no Asus Sync software on the PC. I have no clue why ADB won't see my device.
Now many of us can really shoot ourself in the foot.
by far the best and quickest adb install/setup ever. thanks OP!
neo1738 said:
by far the best and quickest adb install/setup ever. thanks OP!
Click to expand...
Click to collapse
aw shucks!
THANKS!
biggem001 said:
ADB Devices : This command shows all connected android devices that will respond to an ADB command. It is useful for making sure your device is connected.
ADB Connect [IPORT] : This command will connect to your device over personal WIFI connection if your device is setup for ADB over WIFI (Requires root and NOT recommended)
ADB Push [local_file] [remote_file] : This command will push any local file to the device (only if the device is Read/Writable. Stock /system/ folders are only Readable.
ADB Pull [Remote_file or Directory] [Save file or Directory] : This command take files or an entire directory and save it to your desired location. This command only works when directory is read/Writable.
ADB Shell [command] : This command will perform most UNIX commands on the device. Without a command, you can enter several shell commands before you ‘exit’. Most will not work unless SU is applied (# instead of $). Must be rooted for SU. Only play with these commands if they are known by you or exactly copied from instructions.
ADB Logcat [ > file.txt ] : This command will display (or save per > file.txt) a log of what’s happening on the device. If you are receiving errors, turn on logcat, reproduce error, turn off, and send logcat to the developer.
ADB Install [-r][-s] [local_apk] : This command force installs (or reinstalls –r or –s installs on SD-Card) any APK provided.
ADB Uninstall [-k] [APK_Name] : This command uninstalls any APK Name provided (app.apk) and will even keep cache and other data with the –k tag.
Click to expand...
Click to collapse
Just a small suggestion, adb won't accept commands if they are capitalized.
For example "ADB devices" will work perfectly, but "ADB Devices" won't.
So, in order to help the newest of newbies, you might want to put the commands in lowercase in the first post.
With the new secure adb I had an issue:
(I was transferring data to a new harddrive and in the process
I deleted my /home/me/.android/ (somewhere in \Users\me\AppData\ on windows) folder because I thought I didnt need anything in it.
Then I wanted to pull some files from my CM10.1 nightly device per adb.
It said: "error: device offline" when trying to access it.
Now, the computers adb key was gone with the userdata folder of the sdk (the .android folder) and access was denied. But somehow whatever manages the authorization questions thought that this computer was still trusted and did not ask for a new authorization.
To fix that I did the following:
delete the computers adb key: rm /data/misc/adb/adb_key on device
(I have no idea if in case of multiple authorized computers the additional keys are in a new line of the file or if they are in new files. I have only 1 computer.)
stop all adb processes "killall adb" in linuxoids and "taskkill /IM adb.exe" in windows or simply the taskmanager in both.
restart the phone
toggle usb debugging off and on
connect
use adb
click authorize
works
In my case it was even nastier because my sdk userdata folder ~/.android (on small ssd) was a symlink to /data/home/me/.android (on a huge drive for the emulators, android-sources and stuff)
and the symlink pointed to a nonexisting path which prevented saving any sdk settings.
On deleting the symlink or recreating the folder it should work.
Thanks. Very useful! :good:
for me and the HTC One X it wont work.....
-Happy Feet- said:
for me and the HTC One X it wont work.....
Click to expand...
Click to collapse
Did work previously?
maybe restart the adbd on the phone.
Can you test in Recovery, Cwm has an extra button for restarting.
Maybe Stock too.
Illidan Pornrage said:
With the new secure adb I had an issue:
(I was transferring data to a new harddrive and in the process
I deleted my /home/me/.android/ (somewhere in \Users\me\AppData\ on windows) folder because I thought I didnt need anything in it.
Then I wanted to pull some files from my CM10.1 nightly device per adb.
It said: "error: device offline" when trying to access it.
Now, the computers adb key was gone with the userdata folder of the sdk (the .android folder) and access was denied. But somehow whatever manages the authorization questions thought that this computer was still trusted and did not ask for a new authorization.
To fix that I did the following:
delete the computers adb key: rm /data/misc/adb/adb_key on device
(I have no idea if in case of multiple authorized computers the additional keys are in a new line of the file or if they are in new files. I have only 1 computer.)
stop all adb processes "killall adb" in linuxoids and "taskkill /IM adb.exe" in windows or simply the taskmanager in both.
restart the phone
toggle usb debugging off and on
connect
use adb
click authorize
works
In my case it was even nastier because my sdk userdata folder ~/.android (on small ssd) was a symlink to /data/home/me/.android (on a huge drive for the emulators, android-sources and stuff)
and the symlink pointed to a nonexisting path which prevented saving any sdk settings.
On deleting the symlink or recreating the folder it should work.
Click to expand...
Click to collapse
Fraid it didn't work. End up with various errors and randomly appearing devices. Plus, the original error reappears eventually. Please help!
If you give me some Info around the issue, like what you intended to do and if it worked previously, I could help you.
FIX adb offline problem
When you connect a device running Android 4.2.2 or higher to your computer, the system shows a dialog asking whether to accept an RSA key that allows debugging through this computer.
This security mechanism protects user devices because it ensures that USB debugging and other adb commands cannot be executed unless you're able to unlock the device and acknowledge the dialog.
This requires that you have adb version 1.0.31 (available with SDK Platform-tools r16.0.1 and higher) in order to debug on a device running Android 4.2.2 or higher.
If you haven't this pop-up mesage in your device, there is the solution :
1) Install SDK in your PC
It may asks you to install JAVA, if so, do it.
2) make sure that your adb is 1.0.31 or upper, to know the version, tape : adb version in your commande window
------------------------------------
After that you every thing will be OK
this solved my problem
problem was i had ran this command
sudo apt-get install android-tools-adb
which installed Android Debug Bridge version 1.0.29 in /usr/bin
the system was using this by default even tho i added the platform-tools directory with the newest adb (Android Debug Bridge version 1.0.31) to my environment path.
This solved this problem (running old adb) on LinuxMint:
Method 1:
sudo apt-get remove android-tools-adb
Method 2: (if the first doesn't work)
unplug device
adb kill-server
adb version
Android Debug Bridge version 1.0.29
cd to android sdk dir
cd /home/XXX/adt-bundle-linux-x86_64/sdk/platform-tools/
copy new adb to /usr/bin
sudo cp adb /usr/bin/
adb version
Android Debug Bridge version 1.0.31
adb kill-server
adb devices
daemon not running. starting it now on port 5037 *
daemon started successfully * List of devices attached
plug in the device, and on the device dialog about RSA appeared
accept on device
adb devices
hope this helps...
credit for this solution goes to CoPLaS @ this URL
http://stackoverflow.com/questions/15305725/i-cant-upgrade-from-adb-version-1-0-29
I've ADB problem in bootloader mode: devices not found, list empty. It works fine with phone in normal mode
I've upgraded to adb .31, upgraded drivers but no solution, BTW fastboot devices corectly displays device
Any help ?
Thanks
ciano865 said:
I've ADB problem in bootloader mode: devices not found, list empty. It works fine with phone in normal mode
I've upgraded to adb .31, upgraded drivers but no solution, BTW fastboot devices corectly displays device
Any help ?
Thanks
Click to expand...
Click to collapse
as far as I know adb doesn't work in bootloader mode.
MadMan29729 said:
as far as I know adb doesn't work in bootloader mode.
Click to expand...
Click to collapse
How can I push file to phone it doesn't boot ?
I think thats intentional, bootloader mode is the mode corresponding to fastboot for directly flashing, deleting, formatting, stuff like that in the most basic environment. Try recovery or normal boot for adb, which is for debugging, shell access, backup, filetransfer and so on.
(More info for more specifics)
Thanks, my mistake not using recovery
from Nexus 4 with Tapatalk
took me a bit to get into the thing myself after > 4.2 update
i'm on ubuntu
i had to use the terminal command
Code:
android update sdk --no-ui
a couple of times to get the thing actually updated. using just
Code:
android update sdk
wasn't cutting it for some reason. probably because i'm stupid and didn't fiddle with it enough.
then, realized when i STILL couldn't access the device (even after accepting the computer's RSA key on my n7),
it was because i had previously put a now deteriorated version of adb in /usr/bin. so, i rm'd it (navigate to /usr/bin and
Code:
sudo rm adb
then navigate over the folder whereeveryouputyoursdk/platform-tools/ and
Code:
sudo cp adb /usr/bin
that should be the new version of adb into /usr/bin. remember, do all that after running the
Code:
android update sdk --no-ui
a few times
peace
Long time I play with adb (1.0.31) from Linux without problem.
Today I flash new kernel (GT-I9505_AdamKernel.V1.6 then try Abyss-GT-I9505-1.6.1)
Got abd "device offline"
I come back on KT-SGS4.
adb works.
Can anyboby explian be why adb down't work with some kernels?
MadMan29729 said:
problem was i had ran this command
sudo apt-get install android-tools-adb
which installed Android Debug Bridge version 1.0.29 in /usr/bin
the system was using this by default even tho i added the platform-tools directory with the newest adb (Android Debug Bridge version 1.0.31) to my environment path.
This solved this problem (running old adb) on LinuxMint:
Method 1:
sudo apt-get remove android-tools-adb
Method 2: (if the first doesn't work)
unplug device
adb kill-server
adb version
Android Debug Bridge version 1.0.29
cd to android sdk dir
cd /home/XXX/adt-bundle-linux-x86_64/sdk/platform-tools/
copy new adb to /usr/bin
sudo cp adb /usr/bin/
adb version
Android Debug Bridge version 1.0.31
adb kill-server
adb devices
daemon not running. starting it now on port 5037 *
daemon started successfully * List of devices attached
plug in the device, and on the device dialog about RSA appeared
accept on device
adb devices
hope this helps...
credit for this solution goes to CoPLaS @ this URL
http://stackoverflow.com/questions/15305725/i-cant-upgrade-from-adb-version-1-0-29
Click to expand...
Click to collapse
ah great i thought there was an issue with my adb and you wrote the solution
MadMan29729 said:
problem was i had ran this command
sudo apt-get install android-tools-adb
which installed Android Debug Bridge version 1.0.29 in /usr/bin
the system was using this by default even tho i added the platform-tools directory with the newest adb (Android Debug Bridge version 1.0.31) to my environment path.
This solved this problem (running old adb) on LinuxMint:
Method 1:
sudo apt-get remove android-tools-adb
Method 2: (if the first doesn't work)
unplug device
adb kill-server
adb version
Android Debug Bridge version 1.0.29
cd to android sdk dir
cd /home/XXX/adt-bundle-linux-x86_64/sdk/platform-tools/
copy new adb to /usr/bin
sudo cp adb /usr/bin/
adb version
Android Debug Bridge version 1.0.31
adb kill-server
adb devices
daemon not running. starting it now on port 5037 *
daemon started successfully * List of devices attached
plug in the device, and on the device dialog about RSA appeared
accept on device
adb devices
hope this helps...
credit for this solution goes to CoPLaS @ this URL
http://stackoverflow.com/questions/15305725/i-cant-upgrade-from-adb-version-1-0-29
Click to expand...
Click to collapse
Thanx man you saved me !!!
Sent from my Micromax A57 using xda app-developers app
Thanks
I still had this problem on OSx and Ubuntu in cli.
what i've done on both to address it is, update the SDK to get the newest adb. (i'm suing 1.0.31)
killall adb
then turn off USB debugging on device.
start new adb (doesn't work nothing to connect to)
then turn on USB debugging and suddenly you get the pop up on the android device that says "always allow this computer at xxx"
test adb devices and should show 'device' instead of 'offline'
or try sudo, unplug the device, run adb under sudo on the desktop (sudo adb kill-server; sudo adb start-server), then plug the device back in.
yay!
svs57 said:
Long time I play with adb (1.0.31) from Linux without problem.
Today I flash new kernel (GT-I9505_AdamKernel.V1.6 then try Abyss-GT-I9505-1.6.1)
Got abd "device offline"
I come back on KT-SGS4.
adb works.
Can anyboby explian be why adb down't work with some kernels?
Click to expand...
Click to collapse
When it does that, go to Developer Options and Revoke Permissions and replug it back in. If that isn't it, then make sure you have the newest version of adb. Have had that happen on a couple of times on newer Samsungs.
when I type adb devices cmd in the terminal it does not list my device and its plugged in....
when I try to type adb usb it says no devices found...
for the record nothing is wrong with my USB connection cable because, I'm able to connect my HTC ReZound via USB cable to my macbook, the CDROM and STORAGE auto mounts to my desktop so i know the connection is working, because I'm able to copy files, update music via winamp sync playlists, also my paid EasyTeather copy works, etc.
I updated & installed most recent Android SDK adt-bundle-mac-x86_64-20130917 and updated the device manager for my ver 4.0.3 and all tools, even tryed using a stand alone platform-osx-tools.zip that contains a adb and fastboot...\
I read up on this and found nothing tryed everything....
adb kill-server > adb start-server - does nothing
adding device in the adb_usb.ini didn't help either.
chmod a+r /etc/udev/rules.d/51-android.rules after creating file didn't help.
rebooted many times .
i've attached a terminal cmd window below to show.
USB debugging is enabled on the device, yes? Does the "USB debugging enabled" notification show up when you plug it into the computer?
MaxxPayne said:
when I type adb devices cmd in the terminal it does not list my device and its plugged in....
when I try to type adb usb it says no devices found...
Click to expand...
Click to collapse
are you doing proper methods in command prompt for sdk's adb such as directing it to the folder its in...example did you type cd c:/androidsdk/platform_tools/ in command prompt for example
I used to have a mac ....but here
Download htc sync for mac
http://www.iskysoft.com/convert-mobile/sync-htc-to-mac.html
Download the sdk and all you need is a folder called platform tools
http://developer.android.com/sdk/index.html
Extract the platform tools folder Put it on your desktop
Open terminal type "cd" then hit space then drag and drop the platform tools folder into the terminal after that hit enter
Then you can run any command just make sure to put "./ " before the command without quotations so if you wanna flash a boot you would put
./fastboot flash boot boot.img and hit enter
Note that adb works perfectly well on my Mac without the HTC Sync drivers.
Hi, I hope I am posting in the right section? I found the site really difficult to navigate having never used the site before. If its in the wrong place please can a mod move it.
Ok so I have an Android Set Top Box (STB) and I am trying to extract all the data from it. It is an mxp pro 4k. I don't want a backup of the data I want to extract full images of the device for analysing with forensic tools. The problem is I can't seem to communicate with it. I have the full SDK that is up to date, once navigated to the platform tools folder I opened a command line and typed
Code:
adb devices
after plugging in a USB cable to the OTG port. No prompts appeared on the screen to trust any connections like my iPhone does when I connect it. Adb devices returns no results. So I tried wireless adb, I typed
Code:
adb connect 192.168.x.x
and it said connected. Then when running the devices command I had the ip and port then the word device. I then get a shell by using
Code:
adb shell
Which i then elevate to root by using
Code:
su
. Then when i try an adb pull or adb backup I get a message saying error device offline.
Im new to Android so not even sure I am doing it right. I have done a lot of reading and research but seem to be stuck with the basics. To confirm USB debugging is turned on.