I need to buy a SD Card with the firmware, android car radio launcher, the MCU and run for my
navigation system, with S.O. Jelly Beam 4.2.2, for the mazda CX-9 year 2010, now, is not working, the system stuck on logo.
Thanks
orecgon said:
I need to buy a SD Card with the firmware, android car radio launcher, the MCU and run for my
navigation system, with S.O. Jelly Beam 4.2.2, for the mazda CX-9 year 2010, now, is not working, the system stuck on logo.
Thanks
Click to expand...
Click to collapse
@orecgon Thread closed as one of two duplicates of
I need help from someone.
I need to buy a SD Card with the firmware, android car radio launcher, the MCU and run for my navigation system, with S.O. Jelly Beam 4.2.2, for the mazda CX-9 year 2010, now, is not working, the system stuck on logo, the specifications are...
forum.xda-developers.com
Additionally, your thread does not qualify for a development sub-forum.
Please review the XDA Forum Rules with special emphasis on rule no. 5 and post only ONCE! Thanks for your cooperation.
Regards
Oswald Boelcke
Senior Moderator
Related
Hi everyone,
I have a really old TV BOX bought from a China manufacturer (Q) and i'm not sure if i can update it somehow to a newer Android OS. Right now it's on Android 5.1.1 and the technical specs according to cpu-z are
ARM Cortex -A53 with 3 Cores 2.02 Ghz rev r0p4
MALI -450 MP
Total RAM 2 GB
ROM 12 GB
Is there any custom firmware that i can use to update it?
Many thanks in advance
gropsgr said:
Hi everyone,
I have a really old TV BOX bought from a China manufacturer (Q) and i'm not sure if i can update it somehow to a newer Android OS. Right now it's on Android 5.1.1 and the technical specs according to cpu-z are
ARM Cortex -A53 with 3 Cores 2.02 Ghz rev r0p4
MALI -450 MP
Total RAM 2 GB
ROM 12 GB
Is there any custom firmware that i can use to update it?
Many thanks in advance
Click to expand...
Click to collapse
@gropsgr
Please read the guidances that are stuck on top of every forum prior to your next posting like
Note: Questions go in Q&A Forum
If you are posting a Question Thread post it in the Q&A forum. Technical discussion of Android development and hacking. No noobs, please. Device-specific releases should go under the appropriate device forum...
forum.xda-developers.com
I've moved the thread to Q&A.
Regards
Oswald Boelcke
Senior Moderator
Any updates on this @gropsgr ?
magaupe said:
Any updates on this @gropsgr ?
Click to expand...
Click to collapse
Unfortunately no one ever give an answer
Hello, i am a new nordic track vault owner.. and through google I've been able to get into privileged mode.
For some reason they have restricted workouts on this device.. so i cannot use the vault screen with my bike. I have to purchase a smart tv to put beside it which seems utterly ridiculous.
I can't seem to be able to block the update servers in my firewall not even sure if that will resolve the issue. I just want it to recognize ifit as it would on my phone unrestricted.
Any ideas?
I've also tried kingo root and it failed.
I dont know if it's possible to put a launcher on it ?
Update: I've tried the steps on "if null then" but that didn't work
I also tried the steps here in the treadmill post although the launcher worked, ifit still restricted the workouts based on the device. So i'm not sure how to make it think it's just a regular tablet/phone - as there are no issues playing it there.
Thanks for any help.
shmoes1 said:
Hello, i am a new nordic track vault owner.. and through google I've been able to get into privileged mode.
For some reason they have restricted workouts on this device.. so i cannot use the vault screen with my bike. I have to purchase a smart tv to put beside it which seems utterly ridiculous.
I can't seem to be able to block the update servers in my firewall not even sure if that will resolve the issue. I just want it to recognize ifit as it would on my phone unrestricted.
Any ideas?
I've also tried kingo root and it failed.
I dont know if it's possible to put a launcher on it ?
Click to expand...
Click to collapse
@shmoes1
Prior to your next posting please read the guidances that are stuck on top of every forum like
[Read Before Posting]QUESTIONS DO NOT BELONG IN GENERAL
Hello Everybody, In order to attempt to keep this forum neat and tidy the moderation team is asking you to post your questions into the Questions and Answers (Q&A) forum and not into the General section. You can find the Q&A forum by clicking...
forum.xda-developers.com
and the others. I've moved the thread to Android Q&A.
Thanks for your cooperation.
Regards
Oswald Boelcke
Senior Moderator
hi, does anyone know how to get he base OS or firmware for the nordictrack android tablet?
Mine is
360526 MP7QCFS Module.my tablet internal rom failed and now its reporting " no bootable device" . If I can find the firmware and instructions, I can load it into the sd card and get it back.
Hi,
hoping this is the right place for posting this question...
I'm working building my own custom ROM starting from an Allwinner Android/Linux source code.
Build and .img flashing/starting-up are OK.
Platform is :
TV Box : Allwinner H3 MXQ Pro 4K 1GB RAM / 4GB ROM
Android : 7.0
Kernel : 4.4.55
Problem:
A change to the display resolution (for example from 720p_50Hz to 1080p_24Hz)
does not survive the reboot.
I have other "untouched" Allwinner H3 TV Box's with same HW (e.g an Andowl)
and same pre-installed (by the manufacturer) Android/Kernel versions, where the resolution change survives the reboot.
As probably you know , Allwinner U-Boot 2014.07 reads
(in \lichee\brandy\u-boot-2014.07\board\sunxi\common\bootGUI\dev_manage.c)
the display format from Reserve0 partition (Reserve0/disp_rsl.fex (eg 0x408))
and passes it to kernel for display system initialization.
Here a short UART log from a working TV BOX
-------------------------------------------------------------------
U-Boot 2014.07 (Aug 28 2020 - 08:44:29) Allwinner Technology
.............
get format[408] for type[4]
get format[20b] for type[2]
.............
save_int_to_kernel disp.boot_disp(0x408) code:<no error>
save_int_to_kernel disp.init_disp(0x20b0000) code:<no error>
-------------------------------------------------------------------
For some reason, in my case, nobody (Android or Kernel) updates Reserve0/disp_rsl.fex
with latest format when changing the resolution from GUI, so U-Boot always sets the default resolution
taken from sys_config.fex.
I tried to debug the issue without success,
Any help on this?
Tnx
Mx56
Micromax56 said:
Hi,
hoping this is the right place for posting this question...
Click to expand...
Click to collapse
Hello and good afternoon, @Micromax56
Welcome to XDA. I hope you'll always find and get the support you require.
However, prior to your next posting please read the guidances that are stuck on top of every forum like
Note: Questions go in Q&A Forum
If you are posting a Question Thread post it in the Q&A forum. Technical discussion of Android development and hacking. No noobs, please. Device-specific releases should go under the appropriate device forum...
forum.xda-developers.com
and the others. I've moved the thread to Android Q&A.
Please advise if you rather like the thread to be moved to
Android Stick & Console AllWinner based Computers
Use this forum to discuss AllWinner based computers
forum.xda-developers.com
Thanks for your cooperation!
Regards
Oswald Boelcke
Senior Moderator
Hi Oswald,
sorry for posting in the wrong forum. It is OK the Q&A forum.
Thx
Mx56
hi,
i have lost my 4 digit passw which is needed when the android ph starts up then after the passw entry,you go to the android ph desktop .I have lost that passw.Can anyone help? Even for a fee if you are in QLD australia??
Any programmers would like a small job if yyou are in qld australia or if it could work from overseas without sending the phone overseas?
Can anyone help?
regards
StartScrPasswLocked said:
hi,
i have lost my 4 digit passw which is needed when the android ph starts up then after the passw entry,you go to the android ph desktop .I have lost that passw.Can anyone help? Even for a fee if you are in QLD australia??
Any programmers would like a small job if yyou are in qld australia or if it could work from overseas without sending the phone overseas?
Can anyone help?
regards
Click to expand...
Click to collapse
Hello and good morning, @StartScrPasswLocked
Welcome to XDA. I hope you'll always get the support you require.
However, prior to your next posting please read the guidances that are stuck on top of every forum like
Note: Questions go in Q&A Forum
If you are posting a Question Thread post it in the Q&A forum. Technical discussion of Android development and hacking. No noobs, please. Device-specific releases should go under the appropriate device forum...
forum.xda-developers.com
and the others. I've moved your thread to Android Q&A.
Thanks for your cooperation!
Regards
Oswald Boelcke
Senior Moderator
Hello, what version of android does it run
$cronos_ said:
Hello, what version of android does it run
Click to expand...
Click to collapse
hi,its the Fun OS 10 version.
regards
StartScrPasswLocked said:
hi,its the Fun OS 10 version.
regards
Click to expand...
Click to collapse
So it is a vivo phone? Which model
$cronos_ said:
So it is a vivo phone? Which model
Click to expand...
Click to collapse
yes its a vivo.It was a model just around the time the y11s came out.I cant actually remember what the model was.
Are you able to fix it/reset the password? Where are you located?
thanks
regards
StartScrPasswLocked said:
yes its a vivo.It was a model just around the time the y11s came out.I cant actually remember what the model was.
Are you able to fix it/reset the password? Where are you located?
thanks
regards
Click to expand...
Click to collapse
hi,
i think the problem has been solved.Thanks for the repllies.
much appreciated
thanks and regards
So now on restart it tells me system is corrupt and need to decorrupt and I have to press power button in 5 second phone will shut off. I press the power button and it loads normal. Everything works but it's way slower lagging and stuff. I tried to log in recovery but I up until just now pressed a bunch of random buttons for into recovery mode. It word never make it to recover mode the little Android man wild pup up and say no system command. Anyway made it to recovery mode and wiped the partitions and rebooted and still popped up system corrupted. I also have done a factory reset to no avail. Oh yeah I forgot to state that the upload of android 13 from 11 made it almost 3/4 of the download before stopping. So it never finished and I'm still running that same Android 11 just with I'm guessing corrupted files from boatloader not being unlocked. I mean it's a 60$ phone from Walmart but it's all I have right now. I'm sure a couple people have been there. Anyway I know someone knows what I should do. Just say screw it and don't mess with it since it still loadimg morally and I can get online and use apps. Or is it a crash waiting to happen?? Should I download factory rom from somewhere and root, then unlock boatloader, flash ROM and restart. And if someone could tell me how is the best way to flash or get the corrupted files off before I I flash the new one?? Or will the news one fix the crashed files. Please just a dummy needing help.
Here is my phone info.
Baseband version
MOLY.LR12A.R3.MP.V166.P16
Kernel version
4.19.127-g2791662
#1 Wed Nov 2 16:08:05 CST 2022
Build number
EA211002_1420
And I know this is not the correct spot for the thread could y'all please put it where it needs to go do I can get help. Thanks everyone.
LTC3 said:
So now on restart it tells me system is corrupt and need to decorrupt and I have to press power button in 5 second phone will shut off. I press the power button and it loads normal. Everything works but it's way slower lagging and stuff. I tried to log in recovery but I up until just now pressed a bunch of random buttons for into recovery mode. It word never make it to recover mode the little Android man wild pup up and say no system command. Anyway made it to recovery mode and wiped the partitions and rebooted and still popped up system corrupted. I also have done a factory reset to no avail. Oh yeah I forgot to state that the upload of android 13 from 11 made it almost 3/4 of the download before stopping. So it never finished and I'm still running that same Android 11 just with I'm guessing corrupted files from boatloader not being unlocked. I mean it's a 60$ phone from Walmart but it's all I have right now. I'm sure a couple people have been there. Anyway I know someone knows what I should do. Just say screw it and don't mess with it since it still loadimg morally and I can get online and use apps. Or is it a crash waiting to happen?? Should I download factory rom from somewhere and root, then unlock boatloader, flash ROM and restart. And if someone could tell me how is the best way to flash or get the corrupted files off before I I flash the new one?? Or will the news one fix the crashed files. Please just a dummy needing help.
Here is my phone info.
Baseband version
MOLY.LR12A.R3.MP.V166.P16
Kernel version
4.19.127-g2791662
#1 Wed Nov 2 16:08:05 CST 2022
Build number
EA211002_1420
And I know this is not the correct spot for the thread could y'all please put it where it needs to go do I can get help. Thanks everyone.
Click to expand...
Click to collapse
Hello and good morning, @LTC3
Welcome to XDA! I hope you'll always get the support you require.
However, prior to your next posting please read the guidances that are stuck on top of every forum like
Note: Questions go in Q&A Forum
If you are posting a Question Thread post it in the Q&A forum. Technical discussion of Android development and hacking. No noobs, please. Device-specific releases should go under the appropriate device forum...
forum.xda-developers.com
and the others. I've moved your thread to Android Q&A.
Additionally, please review the XDA Forum Rules, to which you agreed to adhere when you registered a few minutes ago. I've edited the title of your thread and removed the inappropriate language.
Thanks for your cooperation!
Regards
Oswald Boelcke
Senior Moderator
Oswald Boelcke said:
Hello and good morning, @LTC3
Welcome to XDA! I hope you'll always get the support you require.
However, prior to your next posting please read the guidances that are stuck on top of every forum like
Note: Questions go in Q&A Forum
If you are posting a Question Thread post it in the Q&A forum. Technical discussion of Android development and hacking. No noobs, please. Device-specific releases should go under the appropriate device forum...
forum.xda-developers.com
and the others. I've moved your thread to Android Q&A.
Additionally, please review the XDA Forum Rules, to which you agreed to adhere when you registered a few minutes ago. I've edited the title of your thread and removed the inappropriate language.
Thanks for your cooperation!
Regards
Oswald Boelcke
Senior Moderator
Click to expand...
Click to collapse
I'm sorry brother I'm just super frustrated right now. But thank you for not deleting it moving it your awesome !!
If you find the stock ROM PLEASE let me know ! i have the same phone and want to install TWRP and def Root the device !!! did you happen to find it? someone said you can "hijack" it off the device if i knew how i would and send it to you ! haha