Related
Welcome everyone!
This thread has been created for extreme newbies/noobs and for their benefit. Not only noobs, but everyone is free to post questions and also give answers to those questions. Any type of question is allowed as long as it is related about the device. No off-topic discussions are allowed!
Hit Thanks if I Helped You!
Regards,
PoseidonKing
Hello,
I've installed a custom recovery, SuperSU and the xposed framework on my Wileyfox Swift 2 Plus and yesterday I've received an OTA update with wich I was (as expected) unable to update my phone. (it just rebooted to TWRP and did nothing) On their website I was only able to find an older build. I think what I have to do is install the stock recovery(to install the update then switch back to a custom one), but I don't know where to get it from.
boa05 said:
Hello,
I've installed a custom recovery, SuperSU and the xposed framework on my Wileyfox Swift 2 Plus and yesterday I've received an OTA update with wich I was (as expected) unable to update my phone. (it just rebooted to TWRP and did nothing) On their website I was only able to find an older build. I think what I have to do is install the stock recovery(to install the update then switch back to a custom one), but I don't know where to get it from.
Click to expand...
Click to collapse
Here you go. https://drive.google.com/file/d/0B1k2IwBoVgfFVVF1UEY3cUVVY28/view?usp=sharing
I grabbed this from cm-13.1.4-ZNH2KAS5RM-marmite-signed-fastboot-c64f8f5d87 - flash it via Fastboot preferably.
linuxct said:
Here you go. https://drive.google.com/file/d/0B1k2IwBoVgfFVVF1UEY3cUVVY28/view?usp=sharing
I grabbed this from cm-13.1.4-ZNH2KAS5RM-marmite-signed-fastboot-c64f8f5d87 - flash it via Fastboot preferably.
Click to expand...
Click to collapse
Thank you very much, I've installed the stock recovery and also uninstalled xposed framework and SuperSU so the System partition would be clean but when trying to update I get a derpy android with the text: ERROR. Does anyone know how can I fully revert to stock so I can install the update, would a factory reset solve my problem?
boa05 said:
Thank you very much, I've installed the stock recovery and also uninstalled xposed framework and SuperSU so the System partition would be clean but when trying to update I get a derpy android with the text: ERROR. Does anyone know how can I fully revert to stock so I can install the update, would a factory reset solve my problem?
Click to expand...
Click to collapse
You mean, a Cid face? LOL
You can revert by flashing the system.img via fastboot from the very same zip I mentioned before. You can get it here: http://builds.cyngn.com/factory/marmite/cm-13.1.4-ZNH2KAS5RM-marmite-signed-fastboot-c64f8f5d87.zip
boa05 said:
Thank you very much, I've installed the stock recovery and also uninstalled xposed framework and SuperSU so the System partition would be clean but when trying to update I get a derpy android with the text: ERROR. Does anyone know how can I fully revert to stock so I can install the update, would a factory reset solve my problem?
Click to expand...
Click to collapse
Exactly the same here. I flashed TWRP so I can install SuperSU for root access, now I've flashed back the stock recovery to apply the update and it ends in "Error".
It's also not possible to apply the downloaded zip-package manually (not via TWRP and not via Cyanogen recovery).
Log file says:
E: footer is wrong
E: Signatur verification failed
Installation aborted.
Click to expand...
Click to collapse
It's not an option for me to do a full reset each time they (who ever it might be in the future) release an update.
I bought this phone because I thought it might be easier to update/ get root access compared with e.g. Samsung devices, but in the end I must say Cyanogen OS is really bad and I hope there will be some mods soon, so I can get these bad/restrictive stock-OS off my phone...
zerospaced said:
Exactly the same here. I flashed TWRP so I can install SuperSU for root access, now I've flashed back the stock recovery to apply the update and it ends in "Error".
It's also not possible to apply the downloaded zip-package manually (not via TWRP and not via Cyanogen recovery).
Log file says:
It's not an option for me to do a full reset each time they (who ever it might be in the future) release an update.
I bought this phone because I thought it might be easier to update/ get root access compared with e.g. Samsung devices, but in the end I must say Cyanogen OS is really bad and I hope there will be some mods soon, so I can get these bad/restrictive stock-OS off my phone...
Click to expand...
Click to collapse
I haven't checked myself but linuxct seems to say its an img file. You need to flash img files with fastboot. Have you tried unziping the .zip file and seeing if there are img files (e.g system.img, recovery.img)
If you don't know how to use fastboot here is a good tutorial: https://forum.xda-developers.com/showthread.php?t=2277112
Hope this helps.
zerospaced said:
I flashed TWRP so I can install SuperSU for root access
Click to expand...
Click to collapse
You can enable that inside Developer options > Root access. There's no need to either alter your system nor unlock your bootloader if your only concern is root privileges.
zerospaced said:
... but in the end I must say Cyanogen OS is really bad and I hope there will be some mods soon, so I can get these bad/restrictive stock-OS off my phone...
Click to expand...
Click to collapse
Cyanogen is no more, Wileyfox's switching to an AOSP-based ROM through the following OTAs, which will be Android 7.0 Nougat and will start rolling on february. You've more info here: https://forum.xda-developers.com/swift-2/how-to/official-wileyfox-statement-regarding-t3528844
linuxct said:
You can enable that inside Developer options > Root access. There's no need to either alter your system nor unlock your bootloader if your only concern is root privileges.
Click to expand...
Click to collapse
No, I think that is only there in CyanogenMod (the community based custom rom) not in the Cyanogen OS (the proprietary OS for businesses). As far as I know no OEM can release an android phone with Gapps and root. We have an option there called "OEM unlock" which will allow you to unlock your bootloader (from a computer) but nothing else that would grant root out of box.
zerospaced said:
Exactly the same here. I flashed TWRP so I can install SuperSU for root access, now I've flashed back the stock recovery to apply the update and it ends in "Error".
It's also not possible to apply the downloaded zip-package manually (not via TWRP and not via Cyanogen recovery).
Log file says:
It's not an option for me to do a full reset each time they (who ever it might be in the future) release an update.
I bought this phone because I thought it might be easier to update/ get root access compared with e.g. Samsung devices, but in the end I must say Cyanogen OS is really bad and I hope there will be some mods soon, so I can get these bad/restrictive stock-OS off my phone...
Click to expand...
Click to collapse
Just flashing back to the stock recovery does not remove SuperSU. Due to your error I'm assuming you have a non-systemless root. In order to remove SuperSU you must flash http://downloadmirror.co/Uot/UPDATE-unSU.zip (with TWRP), and if that doesn't work I would recommend flashing back to full stock cyngn from: https://cyngn.com/support.
Cheers!
linuxct said:
You mean, a Cid face? LOL
You can revert by flashing the system.img via fastboot from the very same zip I mentioned before. You can get it here: http://builds.cyngn.com/factory/marmite/cm-13.1.4-ZNH2KAS5RM-marmite-signed-fastboot-c64f8f5d87.zip
Click to expand...
Click to collapse
Thank you very much, flashing the system.img with
Code:
fastboot flash system system.img
fixed the issue and I was able to update my system to the latest version and since it only changed the system partition, no data (files from internal/external storage) nor apps (not even their data) were deleted. After the update I had to flash TWRP, SuperSU and Xposed again.
boa05 said:
Thank you very much, I've installed the stock recovery and also uninstalled xposed framework and SuperSU so the System partition would be clean but when trying to update I get a derpy android with the text: ERROR. Does anyone know how can I fully revert to stock so I can install the update, would a factory reset solve my problem?
Click to expand...
Click to collapse
boa05 said:
Thank you very much, flashing the system.img with
Code:
fastboot flash system system.img
fixed the issue and I was able to update my system to the latest version and since it only changed the system partition, no data (files from internal/external storage) nor apps (not even their data) were deleted. After the update I had to flash TWRP, SuperSU and Xposed again.
Click to expand...
Click to collapse
Thank you, but unfortunately I've read this hint after trying the unsu method described here:
https://forum.xda-developers.com/showpost.php?p=63615067
I've installed the unsu-zip package and flashed the original boot.img via TWRP. It did not help, but since I did this I have another warning message when booting: "The dm-verity is not started in enforcing mode."
In the end I managed to get the update by installing the original zip package again and after this the OTA update worked.
What still remains is the new "dm-verity error message" right after booting....
Does anyone know if there is anywhere I can find the files to manually update to the new AOSP based ROM. Or has Wileyfox not released it?
(Or has anyone captured the PTA link?)
There is currently no new AOSP ROM. I've received only Cyanogen OS update (probably the last one?). According the Wileyfox statement on facebook, the new ROM (Nougat) will be released in the february...
rivierakid said:
There is currently no new AOSP ROM. I've received only Cyanogen OS update (probably the last one?). According the Wileyfox statement on facebook, the new ROM (Nougat) will be released in the february...
Click to expand...
Click to collapse
Nah they are releasing an update first to transition to their new rom.
"We have been ruthlessly testing this and planning a distribution for this update, with a rollout to be released beginning today with immediate effect." -Wileyfox Facebook
Click to expand...
Click to collapse
Then later (between February and end of Q1) they will release nougat. Its an easy mistake to make as they aren't too clear about it.
Thanks anyway.
It is unclear what kind of ROM will they release. According the statement it should be bloatware free OS
AOSP, Lineage OS, something else?
I really like cyanogenmod, so I hope there will be Lineage OS ROM in the future...
The new update
Hi, I'm not in the least technologically minded so please don't take the mick when I ask, will the new update delete the cyanogen os? Or is that something I will have to do? If so, what is safe to delete without damaging my phone?
Wow, that was a couple more questions then I had thought!
Thanks all.
Hello,
iam very frustrated by this OTA thing..
I had TWRP and SuperSU installed and i've tried everything but I can't install this OTA -.-" everytime i've tried it it gives me just an "ERROR".
1. I flashed the unSU zip in twrp.
2. I set the switch for stock recovery in developer options.
3 I fastboot flashed the stock recovery.img
4 I fastboot flashed the stock system.img
Then rebooted and did the update it just runs to like 20% and stops and then it shows me "ERROR" ..
Can somebody experienced help me pls This update is annoying I had to block it out of my mobile data use because it would eat up all my mobile data
EDIT: Maybe I have to relock my bootloader?
MCPoppa said:
Hello,
iam very frustrated by this OTA thing..
I had TWRP and SuperSU installed and i've tried everything but I can't install this OTA -.-" everytime i've tried it it gives me just an "ERROR".
1. I flashed the unSU zip in twrp.
2. I set the switch for stock recovery in developer options.
3 I fastboot flashed the stock recovery.img
4 I fastboot flashed the stock system.img
Then rebooted and did the update it just runs to like 20% and stops and then it shows me "ERROR" ..
Can somebody experienced help me pls This update is annoying I had to block it out of my mobile data use because it would eat up all my mobile data
EDIT: Maybe I have to relock my bootloader?
Click to expand...
Click to collapse
I don't think it'd be a good idea to mess with the bootloader for now. Also, I uninstalled SuperSU from the app. If you have xposed I suggest you uninstall that too (At least that's what I did). Sorry I can't help more I 'm still a little newby myself.
rivierakid said:
It is unclear what kind of ROM will they release. According the statement it should be bloatware free OS
AOSP, Lineage OS, something else?
I really like cyanogenmod, so I hope there will be Lineage OS ROM in the future...
Click to expand...
Click to collapse
Sadly, an OEM cannot rely on community-driven software, so it surely won't be CyanogenMod/Lineage. But, that doesn't mean that in the future we wouldn't be able to enjoy it thanks to custom ROM development
Jahane said:
Hi, I'm not in the least technologically minded so please don't take the mick when I ask, will the new update delete the cyanogen os? Or is that something I will have to do? If so, what is safe to delete without damaging my phone?
Wow, that was a couple more questions then I had thought!
Thanks all.
Click to expand...
Click to collapse
Welcome to the community!
This depends on what you understand about 'new update'. If the new update you're talking about is the currently rolling OTA, the one that's getting prompted on every phone right now, no, that won't delete CyanogenOS yet, but prepare the device to upgrade to a CyanogenOS-free Android 7.0 ROM, which will happen in a month or so. You won't have to do anything but let the phone update each and every single time it requests it. Cyanogen itself is not something you can remove as a user, unless you install what's called a custom ROM (this means, a different ROM software than the one provided by Wileyfox), so, you don't need to worry about it but keeping your device up-to-date as soon as it prompts you with an update ^_^
MCPoppa said:
Hello,
iam very frustrated by this OTA thing..
I had TWRP and SuperSU installed and i've tried everything but I can't install this OTA -.-" everytime i've tried it it gives me just an "ERROR".
1. I flashed the unSU zip in twrp.
2. I set the switch for stock recovery in developer options.
3 I fastboot flashed the stock recovery.img
4 I fastboot flashed the stock system.img
Then rebooted and did the update it just runs to like 20% and stops and then it shows me "ERROR" ..
Can somebody experienced help me pls This update is annoying I had to block it out of my mobile data use because it would eat up all my mobile data
EDIT: Maybe I have to relock my bootloader?
Click to expand...
Click to collapse
Try relocking like you said, but before, flash everything included in the latest CyanogenOS fasboot image zip (from here). To flash all of them at once, execute each and every of the following commands:
Code:
fastboot flash system system.img
fastboot flash userdata userdata.img
fastboot flash cache cache.img
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash modem NON-HLOS.bin
fastboot flash dsp adspso.bin
fastboot flash devcfg devcfg.mbn
fastboot flash aboot emmc_appsboot.mbn
fastboot flash keymaster keymaster.mbn
fastboot flash rpm rpm.mbn
fastboot flash sbl1 sbl1.mbn
fastboot flash splash splash.img
fastboot flash tz tz.mbn
Once done, relock your bootloader by doing:
Code:
fastboot oem lock
Please note, this probably doesn't fully lock your bootloader, as some propietary DRM keys might've been lost during the unlock process...
Good luck and please, keep us posted!
Prerequisites :
Running Stock MIUI
Unlocked Bootloader
Fastboot
Disclaimer : I am not responsible for any damage to your device.
Click to expand...
Click to collapse
Download :
11.0.1 Patched
Instructions :
Download the patched boot image
Install the latest version of Magisk Manager
Reboot the phone in fastboot mode [Power + Volume Down]
Use the following command via command prompt :
Code:
fastboot flash boot magisk_patched.img
fastboot reboot
The phone will reboot into system.
Open Magisk Manager & It'll Show Magisk Is Installed.
You've got a rooted Redmi K20 Pro.
Patched Boot Image Not Available For Your Model Yet? :
1. Download the fastboot flashable stock rom zip from the firmware thread
2. Copy the boot.img to internal storage of your device
3. Install Magisk Manager and tap on patch boot image.
4. Select the boot.img that you just copied
5. A patched boot.img will be placed in the Downloads folder on your device
6. Copy the patched image file to your workstation and follow the afformentioned fastboot instructions
Regards,
acervenky
Reserved
What boot image is it from?
Chinese, Indian ROM?
Edit: my bad, just reread the title :silly:
will the procedure wipe my personal data?
possible to receive OTA after root? thank you very much
KramYY said:
will the procedure wipe my personal data?
possible to receive OTA after root? thank you very much
Click to expand...
Click to collapse
No you won't lose your personal data, and yes you can still receive OTAs.
Regards,
acervenky
Thanks for sharing.. Working perfectly
Will test more update you incase of any issues
Sent from my Redmi K20 Pro using Tapatalk
Do you think there is any chance of getting the higher refresh rate mods working with this rom at all? TIA
I'm a little confused with the instructions, Following instruction number 1 and 2, I need to check for the OTA update and then press install button but I don't see any install or update button as there is no OTA update available right now. am I missing something?
P12AV33N said:
I'm a little confused with the instructions, Following instruction number 1 and 2, I need to check for the OTA update and then press install button but I don't see any install or update button as there is no OTA update available right now. am I missing something?
Click to expand...
Click to collapse
The instructions are to maintain root when new OTAs arrive!
For now you don't need to refer them!
Regards,
acervenky
acervenky said:
The instructions are to maintain root when new OTAs arrive!
For now you don't need to refer them!
Regards,
acervenky
Click to expand...
Click to collapse
Sorry for my noob question but
to root my device all I have to do is Unlock the bootloader, install magisk manager apk and select the direct install option from magisk app. right?
P12AV33N said:
Sorry for my noob question but
to root my device all I have to do is Unlock the bootloader, install magisk manager apk and select the direct install option from magisk app. right?
Click to expand...
Click to collapse
You need to unlock the bootloader first, then install magisk manager and flash the patched boot image via fastboot mode.
Regards,
acervenky
acervenky said:
You need to unlock the bootloader first, then install magisk manager and flash the patched boot image via fastboot mode.
Regards,
acervenky
Click to expand...
Click to collapse
okay got it, is there any twrp port available for this specific device as if I'm not wrong the other guide available for Root and Recovery is for the device "Raphael". Thank you very much for your precious time.
P12AV33N said:
okay got it, is there any twrp port available for this specific device as if I'm not wrong the other guide available for Root and Recovery is for the device "Raphael". Thank you very much for your precious time.
Click to expand...
Click to collapse
No device specific port is not yet available, I had flashed a couple of recoveries most of them resulting in bootloop. Some of them do work!
Regards,
acervenky
About maintaing root with an OTA. I assume you are talking about installing it via TWRP right? And when you say don't reboot (step 3) you mean after installing the OTA right? Also the option on step 5 will it be availble in the TWRP when I will try to flask magisk?
Thanks a lot
Edit - I use the TWRP from wzsx150 and I am on the 9.7.27 developer rom from xiaomi.eu
b0b3rman said:
About maintaing root with an OTA. I assume you are talking about installing it via TWRP right? And when you say don't reboot (step 3) you mean after installing the OTA right? Also the option on step 5 will it be availble in the TWRP when I will try to flask magisk?
Thanks a lot
Click to expand...
Click to collapse
The process mentioned in OP doesn't require TWRP, the option 5 will be available in the magisk manager itself!
If you're a advanced user and have flashed TWRP you do not need to follow this method, just flash the magisk zip and you're ready to go!
Regards,
acervenky
Oh ok thanks alot!! Last thing should I reboot after installing the OTA via TWRP in order to flash the magisk or not as you mention in your method/guide? If this is off topic sorry
b0b3rman said:
Oh ok thanks alot!! Last thing should I reboot after installing the OTA via TWRP in order to flash the magisk or not as you mention in your method/guide? If this is off topic sorry
Click to expand...
Click to collapse
Once you install the OTA and reboot you will lose TWRP as it will be replaced by the stock recovery!
Simply flash TWRP back and flash the magisk zip and you should be good to go!
Regards,
acervenky
Will I lose data during the bootloader unlock process?
If yes what is the best way to backup all my data
Edit: Also need to know any precautions I need to take before and during the process.
superuser#1508 said:
Will I lose data during the bootloader unlock process?
If yes what is the best way to backup all my data
Edit: Also need to know any precautions I need to take before and during the process.
Click to expand...
Click to collapse
Yes you'll lose your data during the bootloader unlock process, best way would be to backup all of your data on your PC first.
The only precaution is that you should be on Indian Firmware 10.3.3!
Regards,
acervenky
acervenky said:
No device specific port is not yet available, I had flashed a couple of recoveries most of them resulting in bootloop. Some of them do work!
Regards,
acervenky
Click to expand...
Click to collapse
Great work! I cannot fully install magisk as I get bootloop everytime I install the zip in the manager (then have to wipe data etc). Im assuming this way I can say goodbye to TWRP and have a fully functional magisk
However, this would also work on chinese phone flashed with Indian/Global ROM yes?
Hey,
Has someone figured out how to root the phone after bootloader unlock? I saw some attempts in the GSI thread but it wolud be nice if somebody who done it publish a guide. [here or in the new thread]
This way it will be easier to find for future people to follow.
hi, i couldn't find a stock boot.img so far. seems we will have to wait some more time to be able to download latest firmware as full rom to get the boot.img, which we can then patch with magisk.
eagerly waiting for it, as i cannot hide my unlocked bootloader so far and some apps refuse to work now (also safetynet check fails)
juergenh99 said:
hi, i couldn't find a stock boot.img so far. seems we will have to wait some more time to be able to download latest firmware as full rom to get the boot.img, which we can then patch with magisk.
eagerly waiting for it, as i cannot hide my unlocked bootloader so far and some apps refuse to work now (also safetynet check fails)
Click to expand...
Click to collapse
You can use the Oxygen Updater app on google play to download the latest full rom. then use https://github.com/vm03/payload_dumper
to get the boot.img.
Manugamé said:
You can use the Oxygen Updater app on google play to download the latest full rom. then use https://github.com/vm03/payload_dumper
to get the boot.img.
Click to expand...
Click to collapse
Oxygen Updater says the Oneplus Nord 2 is not supported, and i couldn't find a Download of latest FullRom.
If you are already unlocked, download the boot image, patch with magisk etc Do you have to factory reset again?
moisthat said:
If you are already unlocked, download the boot image, patch with magisk etc Do you have to factory reset again?
Click to expand...
Click to collapse
That's the point....where and how to download the latest boot.img??
Bootloader is unlocked already.
That's why I want the latest full rom to extract it from that.
juergenh99 said:
That's the point....where and how to download the latest boot.img??
Bootloader is unlocked already.
That's why I want the latest full rom to extract it from that.
Click to expand...
Click to collapse
My reply was confusing, and I wasn't actually replying to you. Sorry about that. I don't know how or where to download the boot.img.
I am trying to ask the community if we need to factory reset again when we flash the patched boot.img. Or if the reset we did during unlock is the only reset needed.
moisthat said:
My reply was confusing, and I wasn't actually replying to you. Sorry about that. I don't know how or where to download the boot.img.
I am trying to ask the community if we need to factory reset again when we flash the patched boot.img. Or if the reset we did during unlock is the only reset needed.
Click to expand...
Click to collapse
unlocking the bootloader means to do a reset. flashing the boot.img does not cause a reset.
you just have root and working magisk after flashing and reboot
juergenh99 said:
unlocking the bootloader means to do a reset. flashing the boot.img does not cause a reset.
you just have root and working magisk after flashing and reboot
Click to expand...
Click to collapse
Well then, now I have joined you in the hunt for this bloody boot.img
HofaTheRipper said:
I am not respondible if you brick your device as there is no full rom download to revert all this.
i have done this:
- installed magisk on the phone and transfered the attached boot.img to the phone.
- patched it with magisk and transfered it to pc
Flashing:
- Unlock bootloader
- Reboot into bootloader
- Download https://dl.google.com/developers/android/qt/images/gsi/vbmeta.img
- `fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img`
- `fastboot flash boot magisk_patched_boot.img`
rebootet and root worked but wifi/bt was broken due some version conflict
Fix for wifi/bt for me was:
- unpack vendor.xz
- reboot to bootloader
- `fastboot reboot fastboot`
- `fastboot flash vendor vendor`
- reboot
My Build Version is DN2103_11_A.08.
Thanks to @phhusson for his help and for his files!
Click to expand...
Click to collapse
Found in this thread. Hope it will work for further updates.
I want to access /data/system/users//settings_ssaid.xml to know what my game unique id is.
But after some research i learned that i have to root to able to get there but i have almost zero knowledge about it.
Are there any guide to root Redmi Note 10 from the scratch? Thanks.
1- Boot into Custom Recovery
2- Flash Magisk ZIP
3- Install Magisk APK
Done
if you want detailed steps , please tell me on wich ROM you are and if you have your bootloader unlocked
alonsoj636 said:
1- Boot into Custom Recovery
2- Flash Magisk ZIP
3- Install Magisk APK
Done
if you want detailed steps , please tell me on wich ROM you are and if you have your bootloader unlocked
Click to expand...
Click to collapse
Hi, I'm on official global ROM 12.5.3.0 RKGMIXM
And i turned on OEM Unlocking in developer mode yesterday (Which is confuse me a little a guide said i have to wait for 7 days for this but mine is nothing it's just switched to on)
OEM Unlocking is only one of the steps, but it does not unlock the bootloader. File a request with Xiaomi.
unlock bootloader
i recommend only booting to twrp, not flashing it
flash magisk 23
hide magisk
inn0ichi said:
...
i recommend only booting to twrp, not flashing it
...
Click to expand...
Click to collapse
Why do you recommend to only booting to TWRP instead of flashing it?
Pasarireng said:
Why do you recommend to only booting to TWRP instead of flashing it?
Click to expand...
Click to collapse
because the twrp developer instruction is to booting , not flashing
alonsoj636 said:
because the twrp developer instruction is to booting , not flashing
Click to expand...
Click to collapse
Aside of that instruction, actually is it 'dangerous' if we install the TWRP? What 'bad things' would/may happen if we install it? (Because I see some guides about installing it on RN10, like this one for example, and I was almost followed that guide).
Risk of bootloop
Pasarireng said:
Aside of that instruction, actually is it 'dangerous' if we install the TWRP? What 'bad things' would/may happen if we install it? (Because I see some guides about installing it on RN10, like this one for example, and I was almost followed that guide).
Click to expand...
Click to collapse
Risk of bootloop and fastboot loop... because this twrp is modded to be booted and then flashed (you can found the option in advanced)
One time i faced a fastboot loop once i flashed directly the twrp , that's why i recommend booting it first and then , flashing
Y
alonsoj636 said:
Risk of bootloop
Risk of bootloop and fastboot loop... because this twrp is modded to be booted and then flashed (you can found the option in advanced)
One time i faced a fastboot loop once i flashed directly the twrp , that's why i recommend booting it first and then , flashing
Click to expand...
Click to collapse
Yes, I mean that, (booting it first then flashing,.. (the TWRP right?).. I think the guide (which the youtube link I attached above) is also told to do that, right? (Or do I misunderstand this?)
Pasarireng said:
Y
Yes, I mean that, (booting it first then flashing,.. (the TWRP right?).. I think the guide (which the youtube link I attached above) is also told to do that, right? (Or do I misunderstand this?)
Click to expand...
Click to collapse
Yes , is the correct way
inn0ichi said:
unlock bootloader
i recommend only booting to twrp, not flashing it
flash magisk 23
hide magisk
Click to expand...
Click to collapse
Please confirm these;
*So we can:
Use TWRP only temporarily, only to root the phone (by flashing Magisk v23),
and then,
back to using the stock recovery on our RN10 afterward,
even if the RN10 is already rooted?
**If the answer for my question above is yes, then (in RN10 condition of Unlocked Boot Loader, Rooted, Stock MIUI & Stock Recovery) ;
Would we still get official OTA Update from Xiaomi (and can download and install the update- as how it's like before rooting the phone)?
Thank you in advance
It's an unnecessarily complicated procedure. Just flash a modified boot.img for your Miui using fastboot from your PC. If you don't have the ability to modify the boot.img on another rooted phone yourself, request a modified boot.img with the exact update version of your Miui here.
StaryMuz said:
It's an unnecessarily complicated procedure. Just flash a modified boot.img for your Miui using fastboot from your PC. If you don't have the ability to modify the boot.img on another rooted phone yourself, request a modified boot.img with the exact update version of your Miui here.
Click to expand...
Click to collapse
Thanks again, (and maybe I will try your suggestion later).. but (sorry)... your reply doesn't answer my questions.
(I think my questions are very clear and probably very easy to be answered by someone who has experience/knowledge about it (like you?).. no?)
Forgive my nooby questions.
But I really want to know as much as I can (especially about the answer for some questions I have inside my head about the matter, like I asked above),.. before executing doing something about my phone.
oops... I'm sorry for double send
In the past I rooted Miui and then continued to get OTA updates. However, this cannot be confirmed for all versions of Miui. Each new update changes the phone software and so what worked before may not work today.
alonsoj636 said:
1- Boot into Custom Recovery
2- Flash Magisk ZIP
3- Install Magisk APK
Done
if you want detailed steps , please tell me on wich ROM you are and if you have your bootloader unlocked
Click to expand...
Click to collapse
Hi, I'm unlocked my phone and installed the orange fox it's the custom recovery right? Because it say so.
If yes, By Flash Magisk ZIP how to do that? Please explain the detailed steps, Thanks.
First of all, I would like to point out that Magisk (root) is a security risk. Without understanding the issues, the phone is more easily exploitable.
To install, just download the magisk file with the ZIP extension. In recovery, select the install option and select this file. Once installed, exit recovery and boot the system. Once the system boots, use magisk and complete the installation it requests.
Lolitary said:
Hi, I'm unlocked my phone and installed the orange fox it's the custom recovery right? Because it say so.
If yes, By Flash Magisk ZIP how to do that? Please explain the detailed steps, Thanks.
Click to expand...
Click to collapse
the answer above is right ... but i would suggest to flash Orange Fox zip and then Magisk zip... to avoid problems
isn't there decrypt.zip for RN10?
How to decrypt this phone?
I usually did that along with rooting with my android phones before this.
Edit:
Update:
It's ok now I understand how, after watching this video.
Long story short, I rooted my N200 T-Mobile variant to A12 DE2118_11_C.15 (Full OTA) not a long time ago with no issues. However to be able to update to DE2118_11_C.16 (Incremental update, w/July 2022 Patch) I had to uninstall Magisk first, then update it to c.16. Now my phone is updated to c.16 but I am very unsure how to root it again to avoid bootloop;
1. Can I use c.15 stock boot image since c.16 was an incremental update? or I need c.16 version?
2. If c.16 boot image is already extracted please share.
3. If none above, how and where I can find the OTA file to extract payload.bin and then boot.img?
I would really appreciate if somebody help me with this, thank you.
HTCore said:
Long story short, I rooted my N200 T-Mobile variant to A12 DE2118_11_C.15 (Full OTA) not a long time ago with no issues. However to be able to update to DE2118_11_C.16 (Incremental update, w/July 2022 Patch) I had to uninstall Magisk first, then update it to c.16. Now my phone is updated to c.16 but I am very unsure how to root it again to avoid bootloop;
1. Can I use c.15 stock boot image since c.16 was an incremental update? or I need c.16 version?
2. If c.16 boot image is already extracted please share.
3. If none above, how and where I can find the OTA file to extract payload.bin and then boot.img?
I would really appreciate if somebody help me with this, thank you.
Click to expand...
Click to collapse
The steps below is what I do since Android 12 update:
**Automatic system updates should be unchecked on Developer options.**
Prerequisites: Rooted with Magisk (v25.2 recommended) / Have stock boot image available.
Preparation:
A. Restore active slot boot img with stock boot on adb shell with root
ex) dd if=/sdcard/boot_a.img of=/dev/block/bootdevice/by-name/boot_a
OR
B. Uninstall Magisk with Restore Image option if available
--------------------------------------------------------------------------------------------------------------
**If you do A first and Direct Install with Magisk, then B option will be available.
1. Update OTA and DO NOT PRESS Restart Button.
2. Backup the new stock boot image. If your current boot is b, then new stock boot is a
ex) dd if=/dev/block/bootdevice/by-name/boot_a of=/sdcard/boot_a.img
3. Patch the newly extracted stock boot with Magisk -> Reboot -> Reboot to fastboot
4. Flash the newly magisk patched image
ex) fastboot flash boot_a new_magisk_boot.img
5. Reboot
OR you can try to install Magisk with in-active slot option at Step #3, then restart with OTA, not with Magisk; however, I've been told that it sometimes makes an issue such as bootloop. Up to you.
follow A1.1 to get your boot.img.
[GUIDE] Root and keeping root options
Update 230526: Correct numbering of "B.1.1 Simple" to "B.1.2 Simple", use "OOS 13+" instead of "OOS 13" as OOS 13.1 is now available A. First time rooting This process is common across all options A.1 Flashing Magisk patched boot image There...
forum.xda-developers.com
After your phone is rooted again, go in developer options and disable automatic system updates so it won't restart without your consent in future OTAs. when it asks for you to restart, go into the magisk app and press install and then "install to inactive slot". Then go back to the system update screen and press restart.
That's it. If you followed the steps correctly, your device should be updated and you should still have root!
Thank you both of you for your help and thorough explanation.
I suppose since I already restarted my device after update I have no chance with @lentm's method.
Now I'm going to follow what @justauserthatusesaphone posted and see what happens.
I will post the result here if somebody else is interested too.
HTCore said:
Thank you both of you for your help and thorough explanation.
I suppose since I already restarted my device after update I have no chance with @lentm's method.
Now I'm going to follow what @justauserthatusesaphone posted and see what happens.
I will post the result here if somebody else is interested too.
Click to expand...
Click to collapse
All you need is the stock boot img file, and here's the latest one:
11_C.16_DE18CB_tmobile_stock.7z is available for download
Click to access the 11_C.16_DE18CB_tmobile_stock.7z (35.3 MB) download with TransferNow
www.transfernow.net
Thank you for posting boot.img @lentm!
I was middle of what @justauserthatusesaphone posted when you attached the boot.img! So thank you very much being mindful of others!
However, just to learn more and be prepared for future updates I tried the other method and it worked perfectly! My device is now rooted with latest update thanks both of you guys!
Next I'm gonna use your method for another N200 which hasn't been updated yet and experience that one as well.
HTCore said:
Thank you for posting boot.img @lentm!
I was middle of what @justauserthatusesaphone posted when you attached the boot.img! So thank you very much being mindful of others!
However, just to learn more and be prepared for future updates I tried the other method and it worked perfectly! My device is now rooted with latest update thanks both of you guys!
Next I'm gonna use your method for another N200 which hasn't been updated yet and experience that one as well.
Click to expand...
Click to collapse
glad to hear you got it!
lentm's link didn't work for me so for anyone else who needs the stock image here is a non-expiring link for stock boot image for Tmobile DE2118 11_C.16:
boot_11_C.16_DE2118_tmobile_stock.img | by towardsdawn for Nord N200 5G
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
www.androidfilehost.com
Could someone please tell me if it's possible to root this device running the latest July 5th update mentioned above without a pc ?
And if so where to find or how to do it ?!
I've been searching everywhere and have only come across a bunch of "one clock root options" that haven't worked .
Brisingrmischief said:
Could someone please tell me if it's possible to root this device running the latest July 5th update mentioned above without a pc ?
And if so where to find or how to do it ?!
I've been searching everywhere and have only come across a bunch of "one clock root options" that haven't worked .
Click to expand...
Click to collapse
One click root APKs don't have access to fastboot to flash a rooted boot.img, which is what you need to do for permanent root for newer Android devices. Also I wouldn't trust those anyway, most are not open source and might contain malware/ads/etc.
You can have a temporary root if your bootloader is unlocked by using a DSU, however if your bootloader has not been unlocked (which you need a PC to do) do NOT attempt to do this. Multiple people have reported bricking their devices attempting to do this so you have been warned.
All files on the DSU will be deleted when you discard the DSU since it is a different system image from the original. If you really know what you're doing you might be able to flash a Magisk rooted boot.img to the original system image from the DSU, I don't know how to do this. You can play around with making the DSU persist through reboots using this guide, I don't know if that works with updates or if all files will have to be discarded if you want to update. I recommend using DSU sideloader with a GSI from phhusson, when it says to run the shell script over ADB you can use a terminal app like Termux instead.
towardsdawn said:
One click root APKs don't have access to fastboot to flash a rooted boot.img, which is what you need to do for permanent root for newer Android devices. Also I wouldn't trust those anyway, most are not open source and might contain malware/ads/etc.
You can have a temporary root if your bootloader is unlocked by using a DSU, however if your bootloader has not been unlocked (which you need a PC to do) do NOT attempt to do this. Multiple people have reported bricking their devices attempting to do this so you have been warned.
All files on the DSU will be deleted when you discard the DSU since it is a different system image from the original. If you really know what you're doing you might be able to flash a Magisk rooted boot.img to the original system image from the DSU, I don't know how to do this. You can play around with making the DSU persist through reboots using this guide, I don't know if that works with updates or if all files will have to be discarded if you want to update. I recommend using DSU sideloader with a GSI from phhusson, when it says to run the shell script over ADB you can use a terminal app like Termux instead.
Click to expand...
Click to collapse
Thank you for your help !
I assume that since my bootloader is not unlocked and I don't have access to a pc I'm pretty much out of luck on rooting this device until I can get access to one .
Guess I'll have find a way to access one .
Much appreciated though !