I Was on the latest ArrowOS build and I wanted to flash he new DoT OS 5.2. I wanted to switch back but when i installed the new rom the device was stuck in boot animation and it was like that for other 2 roms so i tried to flash stock firmware and the devices boots but if i try to flash any rom the problem reoccurs. What am i doing wrong? I have never had this kind of problem. I use
TWRP 5.2.9.0. Sorry if i didn't give enough information, thnaks for the answer
xBinyWolf said:
I Was on the latest ArrowOS build and I wanted to flash he new DoT OS 5.2. I wanted to switch back but when i installed the new rom the device was stuck in boot animation and it was like that for other 2 roms so i tried to flash stock firmware and the devices boots but if i try to flash any rom the problem reoccurs. What am i doing wrong? I have never had this kind of problem. I use
TWRP 5.2.9.0. Sorry if i didn't give enough information, thnaks for the answer
Click to expand...
Click to collapse
Hello,
You need to format data (not just wipe).
Follow the clean installation guide at my POCO F1 Ultimate Collection & Guides.
Retrial said:
Hello,
You need to format data (not just wipe).
Follow the clean installation guide at my POCO F1 Ultimate Collection & Guides.
Click to expand...
Click to collapse
I already did and found no success, even repaired file system and did that thing of chaning in exfat2 then 4 again. Changing to Orange fox recovery solved my problem. Thank you for the reply.
Related
1) cm-14.0-20160914-UNOFFICIAL-onyx.zip, 2) cm-14.0-20160917-UNOFFICIAL-onyx.zip
These are the 2 cm14 zips that I tried to flash multiple times (using twrp 3.0.2.0). The flash was successful everytime. But no matter how hard I try, it just won't boot. Just stays stuck on the OnePlus logo for eternity. I just recovered my phone from a soft-brick (no OS, no Recovery) and still continuously trying since days to use cm14.
Please, if anyone can then PLEASE HELP!
amritanshu.sikdar said:
1) cm-14.0-20160914-UNOFFICIAL-onyx.zip, 2) cm-14.0-20160917-UNOFFICIAL-onyx.zip
These are the 2 cm14 zips that I tried to flash multiple times (using twrp 3.0.2.0). The flash was successful everytime. But no matter how hard I try, it just won't boot. Just stays stuck on the OnePlus logo for eternity. I just recovered my phone from a soft-brick (no OS, no Recovery) and still continuously trying since days to use cm14.
Please, if anyone can then PLEASE HELP!
Click to expand...
Click to collapse
Check the bootloader compatibilty of these roms, if they r for the mm bootloader it ll not boot untill u upgrade ur bootloader, check the threads from wer u hv downloaded this...
amritanshu.sikdar said:
1) cm-14.0-20160914-UNOFFICIAL-onyx.zip, 2) cm-14.0-20160917-UNOFFICIAL-onyx.zip
These are the 2 cm14 zips that I tried to flash multiple times (using twrp 3.0.2.0). The flash was successful everytime. But no matter how hard I try, it just won't boot. Just stays stuck on the OnePlus logo for eternity. I just recovered my phone from a soft-brick (no OS, no Recovery) and still continuously trying since days to use cm14.
Please, if anyone can then PLEASE HELP!
Click to expand...
Click to collapse
Most Roms now require you too flash OOS 3.1.3 first. Like mentioned above bootloader issue.
Exodusche said:
Most Roms now require you too flash OOS 3.1.3 first. Like mentioned above bootloader issue.
Click to expand...
Click to collapse
I already flash the OOS 3, but still this problem continues.
File name: OnePlusXOxygen_14_OTA_015_all_201608181615_e03d2112e8ad4bff
Is there any other way how I can manually upgrade my bootloader? That would really help.
amritanshu.sikdar said:
I already flash the OOS 3, but still this problem continues.
File name: OnePlusXOxygen_14_OTA_015_all_201608181615_e03d2112e8ad4bff
Is there any other way how I can manually upgrade my bootloader? That would really help.
Click to expand...
Click to collapse
check out this thread http://forum.xda-developers.com/oneplus-x/general/guide-update-bootloader-firmware-to-t3478917
amritanshu.sikdar said:
I already flash the OOS 3, but still this problem continues.
File name: OnePlusXOxygen_14_OTA_015_all_201608181615_e03d2112e8ad4bff
Is there any other way how I can manually upgrade my bootloader? That would really help.
Click to expand...
Click to collapse
I use Oxygen_14_OTA_18_all but there's a couple files posted on the bootloader upgrade threads that allow you not too flash the whole firmware just the partions you need to upgrade.
i am having same issue i was on oxygenos 3.1.3 firmware when i started to flash nogut roms every nogut rom works except cm. i flashed official cynogenmod 14.1 thinking that problem must have been solved but it wont boot it just shows oneplus logo. i have waited for 30 minutes but nothing happened if something worked out for you please tell me.
Well I've looked around XDA for soultion and this is it.
CM 14 has some Kernel problems, so only what you have to do is just install new kernel as Arsenic or Black Reactor kernel
I was running the new bootloader on cm13 nightlies and couldn't get it to boot either.
Even after a full wipe and reflash with v7 gapps
Gave up in the end and went back to the last cm13 Nightly
flash arsenic kernel after flashing rom and gapps it will boot. Read the posts in ashwin's official cm 14.1 thread.
Flash Black Reactor (recommended) or Arsenic Kernel.
The zip files that you have for CM are the unofficial ones. So I guess they're from Sarthak Narang. Or at least one of them. Those ROMs require the older bootloader to function. So if you have the newer bootloader, it won't work.
Hi ! all ,
i just unlock bootloader offically. now i m confused between these two TWRP. i just want to flash cm based roms as well as revert back to miui roms without any problem. also want to backup my rom & flash through twrp if ever i stuck on boot logo. i mean i dont wanna use fastboot method to flash miui roms everytime . i jsut want to simply revert back to current rom or flash any rom through TWRP. so tell me which is best for me & give me instruction & file link also
Thanks in advance
COFFACE and Alka are really meant for MIUI but I think you can flash CM, never tried it though, I always use official TWRP. then again, I never backup ROMs. I use titanium backup.
zooreo said:
Hi ! all ,
i just unlock bootloader offically. now i m confused between these two TWRP. i just want to flash cm based roms as well as revert back to miui roms without any problem. also want to backup my rom & flash through twrp if ever i stuck on boot logo. i mean i dont wanna use fastboot method to flash miui roms everytime . i jsut want to simply revert back to current rom or flash any rom through TWRP. so tell me which is best for me & give me instruction & file link also
Thanks in advance
Click to expand...
Click to collapse
i use alka with resurrection remix rom. but i have to admit that i did backups but never tried to restore them because there are no guids how to do so on the redmi note 3 pro. because at some roms it seems you have to deselect system partition restore to get a working restore of a backup.
so ... flashing CM or resurrection remix is no problem with alka twrp ... restoring i never tried
I personally prefer Cofface patched by feds64 with which you don't have encryption related problems. I have upgraded and downgraded multiple times in MIUI (dev/stable/miui7/miui8/M/L) and other custom ROMs; and have even restored MIUI and other custom ROM's backup. No issue yet.
You can get it from HERE.
h0LLe said:
i use alka with resurrection remix rom. but i have to admit that i did backups but never tried to restore them because there are no guids how to do so on the redmi note 3 pro. because at some roms it seems you have to deselect system partition restore to get a working restore of a backup.
so ... flashing CM or resurrection remix is no problem with alka twrp ... restoring i never tried
Click to expand...
Click to collapse
Thanx brother
sasukay said:
I personally prefer Cofface patched by feds64 with which you don't have encryption related problems. I have upgraded and downgraded multiple times in MIUI (dev/stable/miui7/miui8/M/L) and other custom ROMs; and have even restored MIUI and other custom ROM's backup. No issue yet.
You can get it from HERE.
Click to expand...
Click to collapse
Thank you bro but i cant get it properly , i mean i m currently on official TWRP now what next? first to flash cofface recovery and then do mentioned ( link ) step?? or directly Go to this step without installing cofface first?? i m currently on miui 8 ( lollipop 5.1 ).
zooreo said:
Thank you bro but i cant get it properly , i mean i m currently on official TWRP now what next?
Click to expand...
Click to collapse
Bro just DOWNLOAD THIS ZIP, connect your phone with usb debugging on and run "Kenzo_MM_TWRP.bat" and follow the steps to flash twrp.
Hi, I am trying to install cynogenmod or mokee rom and the device always gets stuck at cyno/mokee logo. it never goes beyond that. tried to wait for half an hour(waited for one hour twice).
Here is what I am doing:
I used TWRP but it wasnt working so i installed CWM, in both the recoveries I was wiping everything except sd card storage as my zip files were in the card. after that i flashed zip files(ROM & GAPPS). after that i rebooted to system. Am I doing it wrong? I am currently on 4.4.4 stock rom. Need help.
Thank you.
No one to help?
How can TWRP not work on your device? Install again TWRP via adb.
Flash latest twrp 3.0.2 and try
rian_tama said:
How can TWRP not work on your device? Install again TWRP via adb.
Click to expand...
Click to collapse
Rajendran Rasa said:
Flash latest twrp 3.0.2 and try
Click to expand...
Click to collapse
The problem wasn't with the recovery and I wasn't doing anything wrong. It was really too bad to know that the rom version I was installing had a bootloop bug in it. So I had tried two previous versions but they too had the same bug. And unfortunately I tried CONTINUOUSLY for two long days to install those same bugged ROMS as if God has put me in frustration mode. Tech fooled me right, lol.
Grab the November 8 version of Cyanogemod. There are issues with the newer updates.
Hi there. I'm using Redmi Note 3 SD from quite some time. I've officially unlocked the bootloader and flashed many custom as well as MIUI Roms from time to time. But recently I'm facing a problem. I'm trying some Nougat based Roms but facing a weird problem. After flashing Rom when the phone boots up and setup screen comes than while setting up the phone screen crashes in some certain point and it starts from the beginning, it won't past the setup screen. I tried many Roms like NOS, AEX, Lineage but facing the same problem. I've used Nougat based Rom previously but was not facing this issue, it only started when i tried to flashed newer build. Am I doing something wrong. Please I need urgent help so any help will be highly appreciated.
Are u trying to flash the 7.1.2 based rom with 7.1.1 gapps.If yes then first flash the rom and boot, there will be no setup wizard this time and then flash the gapps
ShivamTiwari said:
Are u trying to flash the 7.1.2 based rom with 7.1.1 gapps.If yes then first flash the rom and boot, there will be no setup wizard this time and then flash the gapps
Click to expand...
Click to collapse
I tried without Gapps too but at a point when it ask install from backup or start as a new device it crashes no matter whichever option I choose. Any idea whats the reason. Thanks
rjrulz007 said:
I tried without Gapps too but at a point when it ask install from backup or start as a new device it crashes no matter whichever option I choose. Any idea whats the reason. Thanks
Click to expand...
Click to collapse
Well in that case, I have no idea.Sorry bro,wait for someone else to reply.
rjrulz007 said:
Hi there. I'm using Redmi Note 3 SD from quite some time. I've officially unlocked the bootloader and flashed many custom as well as MIUI Roms from time to time. But recently I'm facing a problem. I'm trying some Nougat based Roms but facing a weird problem. After flashing Rom when the phone boots up and setup screen comes than while setting up the phone screen crashes in some certain point and it starts from the beginning, it won't past the setup screen. I tried many Roms like NOS, AEX, Lineage but facing the same problem. I've used Nougat based Rom previously but was not facing this issue, it only started when i tried to flashed newer build. Am I doing something wrong. Please I need urgent help so any help will be highly appreciated.
Click to expand...
Click to collapse
try clean flashing.
download latest gapps first
in case u get bootloop, download this- unlock_bootloader.zip
clean dalvik+data+system+cache,
then flash firmware+rom+unlock_bootloader.zip+gapps
(i'm using twrp 3.1.0.0 official by TheStrix, never faced such problem. follow my method mentioned above)
rjrulz007 said:
Hi there. I'm using Redmi Note 3 SD from quite some time. I've officially unlocked the bootloader and flashed many custom as well as MIUI Roms from time to time. But recently I'm facing a problem. I'm trying some Nougat based Roms but facing a weird problem. After flashing Rom when the phone boots up and setup screen comes than while setting up the phone screen crashes in some certain point and it starts from the beginning, it won't past the setup screen. I tried many Roms like NOS, AEX, Lineage but facing the same problem. I've used Nougat based Rom previously but was not facing this issue, it only started when i tried to flashed newer build. Am I doing something wrong. Please I need urgent help so any help will be highly appreciated.
Click to expand...
Click to collapse
Flash by formating (not wipe) in twrp
Try clean install. Wipe data and system after backing up.
If that doesn't work, Check if any software is making that issue. In my case, not exactly same, but was stuck on boot after flashing super su.
When i tried to flash twrp using flashify. It didn't work for me. My recovery not working anymore. Fastboot not detecting my phone. What to do now to flash recovery??
Try using BeansGapps
Hello,
I tried to install FuntouchOS on V30 but after restart I can't access TWRP i tried to reinstall in on PC but sometimes it's not recognizing the phone. After fighting I was able to reinstall TWRP but it's not loading still. I'm thinking also that LG partition is different than default but I'm not sure about that. I don't need original ROM i can get any custom ROM just to use it.
Hopefully someone can help me ?
Thanks for help ?
Snip3rPolska said:
Hello,
I tried to install FuntouchOS on V30 but after restart I can't access TWRP i tried to reinstall in on PC but sometimes it's not recognizing the phone. After fighting I was able to reinstall TWRP but it's not loading still. I'm thinking also that LG partition is different than default but I'm not sure about that. I don't need original ROM i can get any custom ROM just to use it.
Hopefully someone can help me
Thanks for help
Click to expand...
Click to collapse
You should ask this in the FunTouch OS ROM thread.
Yes, you had to create a vendor partition to even install that ROM. If you didn't, then you didn't read the instructions. If you did, then yes now your "LG partition" is definitely different from "default".
Both Funtouch and MUI ROMS are not "regular" ROMs you just install with TWRP, like AOSP or stock-based ROMs. They need vendor partition creation. That means you are willing to experiment with your phone.
ChazzMatt said:
You should ask this in the FunTouch OS ROM thread.
Yes, you had to create a vendor partition to even install that ROM. If you didn't, then you didn't read the instructions. If you did, then yes now your "LG partition" is definitely different from "default".
Both Funtouch and MUI ROMS are not "regular" ROMs you just install with TWRP, like AOSP or stock-based ROMs. They need vendor partition creation. That means you are willing to experiment with your phone.
Click to expand...
Click to collapse
It stuck in TWRP splash and doesn't matter which version I'll install it's not working. Is there any way to fix it ?
Snip3rPolska said:
It stuck in TWRP splash and doesn't matter which version I'll install it's not working. Is there any way to fix it ?
Click to expand...
Click to collapse
I'm going to answer you in the right place.
https://forum.xda-developers.com/showpost.php?p=81521981&postcount=43