I'm trying to go from global to eu rom , I've have unlock it and developer mode and USB debugging on but when I connect it to my computer i got just got shared folder up and none of those are available when it boots up in TWRP , any suggestions
Format data and then copy rom file to phone
Sometime you have to restart in recovery mode to show/ select rom file
Note:Click restart in restart in recovery from twrp
Related
hello all.
i am not a developer guy.. so i tried to root my device with some tutorials and articles over the net. and i found a good one at skyneel.com
after reading that.. i did following.:
1. installed proper drivers for my Micromax A120 running on KITKAT 4.4.2
2. enabled USB debugging
3. copied SuperSU file (root_kit.zip) to my sd card
4. run SPtool.exe and loaded MT6582_scatter.txt file and connected my phone.
5. phone was detected and everything went perfect..
6. I Switched on the phone to enter recovery mode (volume up + down + power key)
Now the issue is that my phone shows 2 modes... Recovery mode & Factory Reset Mode. but i can not select any of them.. i use volume keys as per the order of options given.. but the phone always starts in normal mode..
Recovery mode is not loading. so i can not install the SuperSU file which is there in my sd card.. I am stuck at the very last option..
What to do.. How to boot my device into recovery. even adb does not detect my device connected...
Hello,
I have htc desire 601 and android operating system crash and i am unable to boot in the system and enable usb debugging. My phone stops in htc logo. I tried to boot in recovery mode but it dont work and when i tried to root another rom i cant because USB Debugging is off... Has anyone solution for that kind off problem, please?????
sinkowc91 said:
Hello,
I have htc desire 601 and android operating system crash and i am unable to boot in the system and enable usb debugging. My phone stops in htc logo. I tried to boot in recovery mode but it dont work and when i tried to root another rom i cant because USB Debugging is off... Has anyone solution for that kind off problem, please?????
Click to expand...
Click to collapse
U can boot into Hboot right??
If so then go to fastboot mode from there & flash Recovery
If that's not the option for u then i think ruu(rom upgrade utility by htc dev )is solution for u...
yes i can do that to go in hboot mode and i downloaded that ruu file and cannot do that because pc doesnt find my phone and i have installed drivers. Everywhere it says that USB debugging must be enable to do that. I have also downloaded sdk manager and platform tools to try install ruu with cmd via usb cabel but device was not found also. I tried many ways that is on youtube and xda forums but there isnt any good solution yet for me. For good solution that work il gave some donation.
Flash Recovey via fastboot If Device Stuck or Crashed
sinkowc91 said:
yes i can do that to go in hboot mode and i downloaded that ruu file and cannot do that because pc doesnt find my phone and i have installed drivers. Everywhere it says that USB debugging must be enable to do that. I have also downloaded sdk manager and platform tools to try install ruu with cmd via usb cabel but device was not found also. I tried many ways that is on youtube and xda forums but there isnt any good solution yet for me. For good solution that work il gave some donation.
Click to expand...
Click to collapse
Requirements---
1)twrp recovery https://dl.twrp.me/zara/
a)if ur's is zara ul then go for https://dl.twrp.me/zara/twrp-2.8.7.0-zara.img.html
b)if it's zara cl then go for https://dl.twrp.me/zara/twrp-2.8.7.0-zaracl.img.html
2)fastboot cmd 'fastboot flash recovery recoveryname.img' ------------> Where Recovery Name is the file name of ur recovery
3)Any Custom Rom Or Stock Zip
Procedure
1)boot into hboot
2)click on fastboot and connect usb cable
3)open cmd and check fastboot devices
4)it show some id with fastboot name [if it is then u r good]
5)now copy the recovery in ur current cmd folder or else change the folder of cmd into ur recovery path
6)now type fastboot flash recovery twrp-2.8.7.0-zara.img
7)now click on boot loader and scroll down to recovery then click on it
8)now ur in recovery mode now flash any custom rom's [i suggest resurection remix]
9)Before Flasing do factory reset in wipe section and go for install zip in install section
10)now ur good to boot
Note
1)to copy zip to sdcard/ext-card our twrp recovery supports mtp enable while on recovery mode[open my computer there u can see mtp device]
2)if u want to process ruu only then click on adb sideload in advanced sections i think adb will detect the device as in recovery mode
3)then open ruu [i might think it will work]
3)i did nt test the above process
4)if u want the stock os only then download required stock zip and flash it...there r many stocks like europe,,asia .................................
5) Hope u Installed Sdk Manger If not so go for MINIMAL ADB AND FASTBOOT.EXE
At the Same Time U Better Take a look on this Thread Also http://forum.xda-developers.com/desire-601/general/collection-kitkat-ruu-t3228817
Hope it might Helps
Thanks to XDA Developers Thanks To TWRP Recovery Thanks to Custom Roms
And Finally Thanks To My frnd Hareesh
hi guys m new to redmi note 3 i applied for unlock 20 days back and i tried unlocking it on global developer build but stuck at 50% tried china developer rom still same problem even tried i.mi and shows location when phone on it shows blue color when phone switched off shows grey colour any solution for this?
or i need to flash lolipop rom？
I have the file for unlocking bootloader and installing twrp without voiding your warranty and loosing data...
Its unofficial but works well for me
I will be uploading it. With full instructions.
Wait for some days
The solution is here:
download the required files from the given link: [50mb]
https://mega.nz/#!1NhDTQoR!cP7vrchwswOfj3oHQ5saZ2d0JkcmunEn5pqyOcpZDoE
INSTRUCTIONS: [redmi note 3]
1. Get into fastboot mode. Charge the phone first. Hold the power button and the volume down button simultaenously.
2. If you can open your current rom, open developer options by clicking on the build no several times in the about phone menu in settings. and select allow oem unlocking and usb debugging.
3. if not leave it... go on and connect your phone to the PC while in fastboot mode.
BUT, before that: open Command prompt on your PC. (search it on the search box). right click on it and open it in administrator mode.
type in: bcdedit /set testsigning on
hit enter and restart your pc
(this is imp.)
4. open the zip file and extract the contents. open the boot edl mode folder and click the edl.bat file. allow it to run.
5. now screen will turn black, do not disturb it. Now flash the twrp by running flash twrp.bat from the 'flash TWRP' folder.
6. Now go to Unlock folder and run the unlock bootloader.bat file.
your phone will boot into the TWRP recovery mode automatically.
if it opens in chineese you select every tab and find the globe icon.
if the globe icon is found on any of the tab select it and change the language to ENGLISH.
wipe your system from the wipe tab:
Now download the latest CM13 SNAPSHOT BUILD ROM FOR YOUR REDMI:
https://download.cyanogenmod.org/get/kenzo-snapshot.zip
and GAPPS:
http://opengapps.org/?api=6.0&variant=mini
do select the arm 64 version and mini one.
download from your pc and copy it to micro sd card. enter this card into you phone and go to mount in twrp.
mount the micro sd card storage.
select the zip file on the micro sd card from the install tab on twrp and flash it.
now go back and flash open gapps zip file.
now REBOOT to system. everything will work fine
Hello everyone.
So I decided to update my device as i find out that there is a new default ROM available for my device that is Infocus m530.
I downloaded the ROM and i was flashing it through Software Update Tool (SUT) in Normal mode. The installation process got stuck at 16% for like 10 or 15 minutes so I removed the USB (I know its a dumb move ) . And I rebooted the device and got stuck into a boot loop.
I can access the default 3e recovery mode only but because my ROM was in format ob .nb0 I am not able to Flash it using stock recovery, I can no longer access the FastBoot mode,
When i try to boot the device up it goes into One or two loops and the a windows pop up saying no command. In that window if I press power button the stock recovery shows up.
I tried to flash the ROM again using SUT in emergency mode but the device is getting disconnected automatically. In device manager its showing up as Mediatek Pre Loader USB VCOM for a second or 2 and then automatically getting disconnected and then same No Command menu.
For a minute a new device is also popping in the Explorer which usually contains all the default driver of the phone.
Any way I can recover my Bricked Device
Any help or advice would be much appreciated.
Hi , try to flash this firmware from normal Recovery , once you download rename to update now put firmware inside empty formatted sd card and put inside your phone to start flashing from recovery .
https://www.kriztekblog.com/2016/06...=o67JcQ2b1GjkodlJa9ULilWJwoqb1xZxq6CkVi5D960=
I didn't checked it is for zip or for flash tool so test it first . Good luck .
FIXED
Teddy Lo said:
Hi , try to flash this firmware from normal Recovery , once you download rename to update now put firmware inside empty formatted sd card and put inside your phone to start flashing from recovery .
I didn't checked it is for zip or for flash tool so test it first . Good luck .
Click to expand...
Click to collapse
I already tried it but it didnt work.
So finally I was able to fix the device. The META Mode ain't a myth. Flashed the ROM correctly in META mode and the device booted up properly.
I was using AOSPE rom and got new email id from office while adding new email got error saying can not add this email id without encrypting the device. For 3 hrs, it was stuck on 100% then the battery died I turn on the device again and promote screen for the password I didn't know which one to enter so I enter Gmail password. 'Encrypting unsuccessful Password is correct but data is corrupt reset phone to decrypt device' there was no any other options so I proceed like this
1) factory reset -> yes -> swipe
2) advance wipe /system /data /data/media /cache etc.
2) flash last rom I was using(AEX)
3) flash gapps
4) reboot the device.
after a reboot on the setup device screen, com.android.phone and google services framework stop working continuously so from step 2 I tried RR rom but no luck :crying: then flash stock rom and reboot device got in a boot loop :crying::crying: so holding vol. down and power button I am able to enter in bootloader screen but as I enter in recovery mode getting no command screen and adb not detecting the device.
what should I do? how can I get recovery mode back? teamwin or any other?
Hi , if your are able to boot into bootloader , just plug your device and write :
fastboot device
(just to make sure that your device is detected)
Now , from your stock firmware extract just recovery.img and put inside minimal adb & fastboot folder
now open terminal and write :
fastboot flash recovery recovery.img
(in order to flash back your stock recovery)
now write fastboot reboot
More explained you have here:
https://forum.xda-developers.com/2015-moto-g/general/guide-fastboot-flashing-factory-t3187750
stock firmware:
https://forum.xda-developers.com/2015-moto-g/general/index-moto-g-factory-firmware-images-t3169639
XT1550 (Dual-SIM)
Good luck