Hello,
I am using the Qtek 2020 and I was wondering. Is there someone who is able to write an application that is used in the regular dialer to dial the contacts? Especially when I am in the car, call contacts is pretty hard! Using your thumb and no stylus.
Is there someone able to write this? Or is there already such a type of software?
Hope to hear about it!
One hand dialing
Two existing products do what you ask.
1. D9 (by Pocket Gamer) - works quite well and creates its own database from your contacts list which can be dialed with one hand. Searches only in the first or last name, but not both.
2. The better option is Finger Clix by Imaginet software which searches in first and last name and uses the contacts list directly (so you dont have to periodically refresh like in D9).
Thank you very much! But I would like to use the regular dialer! Not a second one.
I knew fingerclix, but also another problem is that it doesn't show numbers on it's buttons. But I am looking for a program or programmer!! Which or who is able to use the regular dialer with an extra button for your contacts.
For the car, take a look at Fonix VoiceDial v1.2, it is a voice based dialer that works amazingly well. You don't need to train it.
http://www.fonix.com
Well worth the $15
Thank again mate! Nice program indeed!
But still looking for a program or programmer which or who could be able to use your contacts in the normal dialer!! Isn't there any option available? Why not? This couldn't be that hard!
If there is any programmer willing to do this, please contact me! Or did someone already do this?
another option closer to what you ask is PhoneExt Plus - this one has a seperate dialer screen (but which looks like the real dialer) where you can dial numbers or get the letters on the numbers to lookup contacts. But this does not work on XDA II -- there is some mention of this being promised in the future.
What you describe would be ideal, of course but have not seen it around.
First off, I have already reverted back to the windows mobile dialer in order to stop the ringtone lag that comes with the touchflo one. My problem is that I tried installing a few different dialers and a couple of them dont show up/work. For example, the one from Godzson looks really great in the screenshots, but I cant get it to show up on my phone. Do i need to reenable the touchflo one in order for that to happen? Would I still have the lag that is apparent with the touchflo one or will Godzson's dialer remove that? Also, I have tried the vga version of the touchflo2d dialer. This showed up and looked great, but I wasnt able to see the numbers I was dialing if I tried to do a conference call. It is important that I can see the numbers just in case I accidentally miss dial and need to make a change. So I guess I am asking for help choosing a dialer or at least help getting some of the dialers I have tried working like they should.
I am also looking for one that I can add in a party when they call. I havent been able to figure out how to do that in the windows mobile dialer and would like to know if it is an option. Essentially, if I am already on the phone with someone and I get an incoming call, I would like to be able to connect the two if I please. I know how to set up a conference call if I call both parties myself, but I would like the option to add someone into a call if they were to call me. Hopefully that makes sense.
So is there any dialer that doesnt have the lag, can add in additional parties, lets you see the number when you type it in for a conference call, and looks nice?
On a side note as a gripe, can anyone use the send key on your phone to set up a conference call? I can do it if I use the key on the touch screen, but not if I press the actual key on my phone. Its a minor concern, but its a weird problem that I have noticed.
Thanks for all of your help and time. This was a long post to read.
I have also tried the PhonEx dialer and wasnt able to use the hold button. Looks like that one is out . Are there any other suggestions?
I've tried many dialers and think I'm staying with PhonEx. I do not seem right the way it is being promoted(post the link and the videos to get it free...) and hence being banned... But I must say its a good piece of software. It is light, thumb oriented, no lag, and it completely replaces the WM dialer (others just add a dial pad). This one even allows you to use the big button keypad during calls. You can also manage(delete/add) your contacts from just there easier. I also like how it presents its four sections: Favorites, Call list, Contacts and Dialpad, giving the same importance to all and allowing to predefine any of them as the main screen for the phone (and not just the classical dialpad). I see also a "Conference" option but not tried that yet.
hello everybody,
i'm loharisan. i got a big Q for all of u that has used X10. Actually i've been using Windows Mobile 6.1 for almost 4 years till today. The most helpful and utilitarian function in WM 6.1 is contact searching mode at dialer.
i.e
if i'm gonna call 'JAMES' in my phone book directory, i just have to hit '5,2,6' at the T9 dialer pad then the contact no of james will appear without having had to search or browse for 'JAMES' in full contact list.. then by clicking at the contact appeared on the dialer screen i can directly call the person.. it is really helpful btw.
now after looking review at youtube and reading i notice that there is no explainantion about the capability of doing so in most recent reviews. actually i'm planning to get x10 this week.
so the question is, does android/ X10 is able to that? just as simple like WM6.1?
please comment and mail me at [email protected]. your kind help is very much appreciated. tqvm
I feel your pain. AS far as I know it doesn't, unless of course, you can find a dialer in the market that implements that behavior.
If you want a 1 click dialer you can try "MeContacts". "Any cut" is also nice if you want a shortcut for a direct dial in your desktop.
After the update to 2.1 in September you can use this app:
http://forum.xda-developers.com/showthread.php?t=637852
Guys.. I have the answer for you.. found it a while back and have been using this as my dialler ever since.. it's called "superdial" by Episode6
You'll love it.
im_iceman said:
Guys.. I have the answer for you.. found it a while back and have been using this as my dialler ever since.. it's called "superdial" by Episode6
You'll love it.
Click to expand...
Click to collapse
Seam pretty good! thanks
The app aTakePhone has that function too.
Hi everyone,
I hope to consider this post in the good section, because I think this problem could be solved by a developer.
So, what's about?
I'm coming from a WM device (HTC Touch HD) and, having a huge amount of contacts, I discovered a problem with the stock dialer.
In my old phone dialer, when I searched for (by example) letters JO it returned all the contacts containing these string in name, surname or company name, like this:
Doe, JOhn (Acme Inc.)
JOhannes, Mike (McNeill Co.)
Power, Paul (JOss Ind.)
In my SGS2 (as well as in the Galaxy Tab) stock dialer, the results returned are only the contacts where the name starts with JO: JOhannes, Mike.
Also, the stock dialer isn't showing the company name and, because I have more persons with the same name, I often make confusions and call the wrong person.
Question: can anybody correct this problem and/or modify the stock dialer in order to return all the relevant results?
A related problem is with the anwer screen where only name and surname are shown. Will be great if could be shown the company name also.
P.S. there is a dialer who already can do a real K9 search and snowing all the relevant results: aTAKEphONE. But I prefere to add as less as possible other application to my phone. Also, the above mentioned dialer does not make video calls.
So, what do you think guys ?
Could we have a real K9 serch in our stock dialer ?
Regards to you all !
Sent from my GT-P1000 using XDA App
Same problem as you mate, the dialer sucks due to this fact. I went for go dialer instead. Works well and has video call (i think...?) And nice grouping of contacts if you have lots...
At least it gives the correct search if nothing else
I'd too stick to the default dialer if it actually worked.
Good luck, and please post here if you find a hack for it.
-E
if you mean t9, try dialer one from market.
sent from my SGSII via T*patalk
Yes, sorry...
I wanted to say t9
To reply to the other posts, neither GO contacts nor Dialer One fits my needs. I've tried almost dialers...
And want to have the t9 for the dialer section and not for it's contact section.
So, I also hope that some skilled developer will find a solution for us.
I'll keep posting any news anyway.
Sent from my GT-P1000 using XDA App
I'm curious but what about dialer one isnt meeting your needs? It searchs first and last name and by number, in both contacts and call logs, all similtaneouly. Brings most often contacted to the top, etc. I'm wondering if its the company name? Not sure as that gets included in the return as I have my contacts set up by name except where then company is the name itself and then I have different numbers set up under that contact. Just curious as I'm always looking for a better mousetrap. I'm sure someone will be along to point at that requests do not belong in this section as stated in the faq above.
krabman said:
I'm curious but what about dialer one isnt meeting your needs? It searchs first and last name and by number, in both contacts and call logs, all similtaneouly. Brings most often contacted to the top, etc. I'm wondering if its the company name? Not sure as that gets included in the return as I have my contacts set up by name except where then company is the name itself and then I have different numbers set up under that contact. Just curious as I'm always looking for a better mousetrap. I'm sure someone will be along to point at that requests do not belong in this section as stated in the faq above.
Click to expand...
Click to collapse
Yeh Dialer one searches business name and just about everything in the contact info. I wouldn't go back to stock even if it did search properly, even though that is why I left it. I personally don't see whats missing in Dialer one either so curious what the topic author finds is missing.
Edit: Except he DOESN'T want T9 when searching contacts and only in the dialer. Not sure of the reason for this but hey. He could always use the stock contact manager still and only use the dialer for making calls.
Oh, I assumed he was using T9 search. I dont even have a contact shortcut on the home screen. A lot of people don't realize its actually less clicks to get to a number through T9 on the dialer than any other search method.
krabman said:
Oh, I assumed he was using T9 search. I dont even have a contact shortcut on the home screen. A lot of people don't realize its actually less clicks to get to a number through T9 on the dialer than any other search method.
Click to expand...
Click to collapse
I agree. Pretty much all contact methods are easily accessable in Dialer one by entering just a few numbers for detailed t9 prediction then clicking on their contact photo choose call, sms, email, video call, full contact info, facebook, google maps.....
Jus thought I'd say I have no affiliation with Dialer one, just a happy user
I hear you. The stock dialer is woefully inadaquate in terms of enhanced functionality and search. Was used to much better before I got to android. Like I said though, always looking for a better mousetrap or just learning something new that makes things either easier or faster.
I have been using Rocket Dialer. its the best i saw amongst all T9 dialers
Guys,
First of all, this post was intended to rise a challenge for developers for finding a solution to have a real T9 search on the stock dialer.
Second, I agree that there are many other dialers out there, most of them better than the stock dialer.
Third, Dialer One does not show the company within the returned results. So, if you search JO and you have more "Doe, JOhn" you will see these results without knowing who-is-who. Will you going to open each one in order to find the right John that you want to call?
Anyway, the discussion slipped to a discussion about different dialers, as I can see. All right, maybe this could give ideas to a good developper for implementing the best funtions in a new dialer... or to modify the stock one.
Keep posting, maybe will improve our Android smartphones.
Sent from my GT-P1000 using XDA App
try youlu address book from the market... its has the best t9 search and interface.
stefanjadex said:
Hi everyone,
I hope to consider this post in the good section, because I think this problem could be solved by a developer.
So, what's about?
I'm coming from a WM device (HTC Touch HD) and, having a huge amount of contacts, I discovered a problem with the stock dialer.
In my old phone dialer, when I searched for (by example) letters JO it returned all the contacts containing these string in name, surname or company name, like this:
Doe, JOhn (Acme Inc.)
JOhannes, Mike (McNeill Co.)
Power, Paul (JOss Ind.)
In my SGS2 (as well as in the Galaxy Tab) stock dialer, the results returned are only the contacts where the name starts with JO: JOhannes, Mike.
Also, the stock dialer isn't showing the company name and, because I have more persons with the same name, I often make confusions and call the wrong person.
Question: can anybody correct this problem and/or modify the stock dialer in order to return all the relevant results?
A related problem is with the anwer screen where only name and surname are shown. Will be great if could be shown the company name also.
P.S. there is a dialer who already can do a real K9 search and snowing all the relevant results: aTAKEphONE. But I prefere to add as less as possible other application to my phone. Also, the above mentioned dialer does not make video calls.
So, what do you think guys ?
Could we have a real K9 serch in our stock dialer ?
Regards to you all !
Sent from my GT-P1000 using XDA App
Click to expand...
Click to collapse
dialer from ZSKF4 has that feature. perhaps you can try flashing that rom. bear in mind that's an Asian rom.
stefanjadex said:
Third, Dialer One does not show the company within the returned results. So, if you search JO and you have more "Doe, JOhn" you will see these results without knowing who-is-who. Will you going to open each one in order to find the right John that you want to call?
Click to expand...
Click to collapse
Ahh so you want to show the company name in in the results. Now I re read your message its pretty obvious now I think of it... Ooops.
I agree maybe we should list things that people like from all dialers and maybe some devs can add these functions to the stock dialer.
I thought you meant search say "Nike" and show all people who work for Nike.... of which Dialer one does but it will also show your best mate "Nikelodeon Smith" as well... but will not show the company name in the search names....
Thank you for your suggestion. Can you try please to post a screenshot with a search result ?
Sent from my GT-P1000 using XDA App
I'm glad that you saw the point. Where I want to arrive is: using our Android handsets also for business, not only for fun.
This is mean that they really should be SMARTphones, helping us to use them better and faster.
Ar regarding your suggestion, let's do it!
I'll start a new post for that purpose and I'll post the link here.
Meanwhile, everybody is welcome to post here their suggestions.
Stefan
Sent from my GT-P1000 using XDA App
stefanjadex said:
Hi everyone,
I hope to consider this post in the good section, because I think this problem could be solved by a developer.
So, what's about?
I'm coming from a WM device (HTC Touch HD) and, having a huge amount of contacts, I discovered a problem with the stock dialer.
In my old phone dialer, when I searched for (by example) letters JO it returned all the contacts containing these string in name, surname or company name, like this:
Doe, JOhn (Acme Inc.)
JOhannes, Mike (McNeill Co.)
Power, Paul (JOss Ind.)
In my SGS2 (as well as in the Galaxy Tab) stock dialer, the results returned are only the contacts where the name starts with JO: JOhannes, Mike.
Also, the stock dialer isn't showing the company name and, because I have more persons with the same name, I often make confusions and call the wrong person.
Question: can anybody correct this problem and/or modify the stock dialer in order to return all the relevant results?
A related problem is with the anwer screen where only name and surname are shown. Will be great if could be shown the company name also.
P.S. there is a dialer who already can do a real K9 search and snowing all the relevant results: aTAKEphONE. But I prefere to add as less as possible other application to my phone. Also, the above mentioned dialer does not make video calls.
So, what do you think guys ?
Could we have a real K9 serch in our stock dialer ?
Regards to you all !
Sent from my GT-P1000 using XDA App
Click to expand...
Click to collapse
Did you ever get any solution for this very annoying problem?
njallotkar said:
Did you ever get any solution for this very annoying problem?
Click to expand...
Click to collapse
Are you referring to searching for company names too in the dialer?
After reading this post I found this app that does it well - Eir Fast Dialer.
You do have to go into the settings to enable company names though but it seems to work well after that.
jjdoctor said:
I have been using Rocket Dialer. its the best i saw amongst all T9 dialers
Click to expand...
Click to collapse
It consumes memory heavily