File transfer to pc (windows 10) doesn't work with android 11 based rom (Only sounds when connect usb cable to pc and click on file tranfer option in usb preference in phone but Device doesn't show in windows file explorer). When I select file transfer in usb preference. It doesn't work, but other option in usb preference like ptp, usb tethering, charging work.
I reverted back to android 10 and checked, it again worked. Then I again flashed this Rom but file transfer with usb doesn't work.
I think it is a problem or bug with android 11.
If any guy has it's solution, plz tell.
mahadev111 said:
File transfer to pc (windows 10) doesn't work with android 11 based rom (Only sounds when connect usb cable to pc and click on file tranfer option in usb preference in phone but Device doesn't show in windows file explorer). When I select file transfer in usb preference. It doesn't work, but other option in usb preference like ptp, usb tethering, charging work.
I reverted back to android 10 and checked, it again worked. Then I again flashed this Rom but file transfer with usb doesn't work.
I think it is a problem or bug with android 11.
If any guy has it's solution, plz tell.
Click to expand...
Click to collapse
Had a similer issue with multiple A11 roms , but tried DotOS 5.2 based on A11 , and it works fine .
* charing speed is back to 1.4 A was 0.5 on Lineage OS .
* USB transfer works as usual .
_
- GPS is bad , not fixing at all
- drainage a little over 20% overnight
- a bit laggy for my taste.
_
~ recommended if u want A11, else stick with A10
link : https://www.droidontime.com/devices/mido
stick with the gapps version for peace of mind
Related
I have an Samsung GS2 and i'm happy, but i have a problem with Win 7 Ultimate X64:
After 2.3.4 update, when i try to copy something from/to Phone/Card, My computer stop responding and it shows the error: "A device attached to the system is not functioning " and the mobile is showing on display "synchronizing". I have reinstalled the Windows but the problem persists.
I tested on a Windows XP x86 and it works grate.
What can i do to fix this problem?
anyone know this problem?
Looks like a drivers problem to me, if you didnt already, try to reinstall latest version of Kies (but dont forget to kill the kies process before using Odin if you plan to use it)
rembrandtlnx said:
Looks like a drivers problem to me, if you didnt already, try to reinstall latest version of Kies (but dont forget to kill the kies process before using Odin if you plan to use it)
Click to expand...
Click to collapse
I tryed to reinstall Kies and drivers but with no succes.
I have this problem too and i resolve it by turn the plane mode on, don't know why but now all is ok ..
Try this.
1. Go to settings --> wireless and network --> usb --> usb mass storage
2. connect the usb cable
3. turn the usb mass storage (the android icon changes to orange now)
Go to my computer and you will now see phone and sd card storage as seperate....you should be able to copy fine now.
arkantos.inme said:
Try this.
1. Go to settings --> wireless and network --> usb --> usb mass storage
2. connect the usb cable
3. turn the usb mass storage (the android icon changes to orange now)
Go to my computer and you will now see phone and sd card storage as seperate....you should be able to copy fine now.
Click to expand...
Click to collapse
same problem :/
Hello!
I know this topic is old but I had the same problem with my Galaxy Note this morning and the solution was to disable USB Debugging.
Just to at least mark this topic as solved.
Cheers,
Arkymedes
For me help different usb cable. On Note 4.
Simple fix
x|RAY [LT] said:
For me help different usb cable. On Note 4.
Click to expand...
Click to collapse
I had this problem with my Galaxy Note 4. I was using the original USB cable which was supplied with the phone. The error was showing up at random stages of the file transfer process - sometimes near completion, sometimes after a second or so; which indicates to me that it may be a hardware problem. So, I then tried using a different USB cable (cheapie from eBay), and it works fine! No brainer fix :silly::silly:
Same issue here - bad cable again in my case. Got a decent quality one and it works fine.
This worked on my Note 4 - Simple Settings -> Developer opions -> Check USB Debugging
I have a NT 16 gb from stock with my smartphone usb cable but not the charger.
I connect the usb cable to an international adapter via its usb port so I think I get 1.6A: and judging by how fast I charge the NT, I would say it is right.
I want cm10.2 or cm11 [preferably of course] but I cannot install cwm.
I cannot get usb debugging on by downloading an apk and lunching it: I must choose between the app installer or the package installer and then get the error: only from NB we can install apk's, great.
I have 1micro sdhc class 4 of 4gb and one class4 16gb, none of them permits to boot up which incredibly sucks, idk why.
I configure them with minitool, 300mb space, and my put img of cwm 6.0.4.6.
Every time I end up with the reset factory choice from NB after I perform pwr+home then power alone; whether I connect the nt to the power adapter or not.
When I connect the nt to windows, it is seen only as a drive.
ADB does not recognize the device of course.
Is there a way to install CM ? without a bootable SD ?
This is unbelievably frustrating and since I am a complete noob to android and all that, pls level with me
this guide is quite helpful: http://wiki.cyanogenmod.org/w/Install_CM_for_acclaim
if i were you i'd throw the ROM and Gapps that you want on the internal storage if you can get into USB mode, then look at this and use this guide to flash CM: http://forum.xda-developers.com/showpost.php?p=21895025&postcount=14
yeah it says how to root stock firmware but it's the same process, just different zip files.
yes I have seen the wiki and I am stuck at Boot to recovery mode since my nook always shows the BN recovery:
from your second link, it is this line
You will see a picture of N on the screen followed by a box with a white background followed by CWM booting up.
CWM does not boot. Is it possible that the problem is from the SD cards ?
I tested a sandisk 32gb class10, it still shows the factory reset screen
Regarding the USB mode, the NT says I must install the apks from BN only, so I do not not know how to active it.
i'm assuming you know how to connect the tablet to a computer... try that.
blue whale said:
I have a NT 16 gb from stock with my smartphone usb cable but not the charger.
I connect the usb cable to an international adapter via its usb port so I think I get 1.6A: and judging by how fast I charge the NT, I would say it is right.
...
Is there a way to install CM ? without a bootable SD ?
This is unbelievably frustrating and since I am a complete noob to android and all that, pls level with me
Click to expand...
Click to collapse
Have you tried the method outlined at http://forum.xda-developers.com/showpost.php?p=51377882&postcount=163?
Note that many NT will boot off SD only from power-off state and upon insertion of a powered USB cable (regular mini-USB cable connected to PC or powered USB Hub should work fine).
Success CM11 is installed \0/; My partition was of type 0b not 0c...
I do have a problem now when I plug in the tablet on windows xp sp3: windows cannot find the drivers with or without debugging on.
Is it possible to see the device as a storage space in general and also being recognized by adb when debugging is on {i believe it is how this work, is it not ?} ?
blue whale said:
Success CM11 is installed \0/; My partition was of type 0b not 0c...
I do have a problem now when I plug in the tablet on windows xp sp3: windows cannot find the drivers with or without debugging on.
Is it possible to see the device as a storage space in general and also being recognized by adb when debugging is on {i believe it is how this work, is it not ?} ?
Click to expand...
Click to collapse
By default the NT should automatically show up as an MTP device when plugged in via USB.
You only need to enable USB debugging when using adb access over USB.
digixmax said:
By default the NT should automatically show up as an MTP device when plugged in via USB.
You only need to enable USB debugging when using adb access over USB.
Click to expand...
Click to collapse
Well, via a software, I removed all the usb drivers connected to an android tablet. Then, the first time I plug in the NT, I have an OMAP443 install [for I do have these drivers] and windows then searches for the "BN NT" but cannot find the drivers. It's quite puzzling.
For the MTP, as far as I understand, I must install windows mediaplayer 11, is there not an alternative >?
blue whale said:
Well, via a software, I removed all the usb drivers connected to an android tablet. Then, the first time I plug in the NT, I have an OMAP443 install [for I do have these drivers] and windows then searches for the "BN NT" but cannot find the drivers. It's quite puzzling.
Click to expand...
Click to collapse
Did you switch the NT to USB mode (Settings->Storage->Settings->UMS)?
For the MTP, as far as I understand, I must install windows mediaplayer 11, is there not an alternative >?
Click to expand...
Click to collapse
MTP on Win PC requires Windows Media Player 10 or later.
it did work after disabling the debuging
so i have a rebranded Cubot C11 named Firefly Mobile S120 .. well the problem is this, of almost 5 ROM i have ported they all share the same Bug .. it is a bug regarding the USB Options when the phone is connected to the PC .. well, USB Storage does mount and work, Media Storage works flawlessly too, Camera PTP, Charging and CD-Rom does work all fine .. the problem is when i change the option ..
Example:
from USB Storage to Media Storage or Vice Versa
when i select a different mounting option, the USB Icon on the Status Bar [or Notification Bar whatever you call that] just disappears and same with the USB Options .. its like the phone forgot that he is connected to my PC via USB Cable .. though the battery still indicates that it is charging via USB Cable ..
well, not unless i reconnect the USB within the USB Port of the phone will then the Phone recognize the new USB Mounting Option ..
i know this is not a serious bug, but i still want to fix this to assure a clean and bugless rom .. i hope anyone can help me with this, please
Hi everyone,
I often transfer files between my Samsung S7 Edge and my Windows PC through USB cable. However, after (making the mistake of) letting it upgrade to Oreo (v8.0), this is no longer possible: connecting the phone via USB to my laptop only shows charging information in the swipe-down top menu, and I no longer get the prompt asking whether I want to allow access to the phone's contents. Consequently, the phone's internal&SD memory no longer shows up under Windows Explorer.
I've been searching for a fix/workaround for hours (thanks Google for this quality time!). Some of the things I've tried that didn't work:
- enable/disable USB debugging mode under developer options
- change "USB configuration" (under Developer Options) to "MTP" and to all other options there
- use a different USB cable and USB port on the laptop
- search for apps on the Play Store that can help with this (didn't find any that actually do the job)
Connecting Android phones to Windows laptops to access their internal memory through USB cable has (bemusingly!) been a problem with this ****ty OS as long as I can remember, so it doesn't surprise me that users are having to spend even more time now to get it to work again.
Any suggestions much appreciated!
longtalker said:
Hi everyone,
I often transfer files between my Samsung S7 Edge and my Windows PC through USB cable. However, after (making the mistake of) letting it upgrade to Oreo (v8.0), this is no longer possible: connecting the phone via USB to my laptop only shows charging information in the swipe-down top menu, and I no longer get the prompt asking whether I want to allow access to the phone's contents. Consequently, the phone's internal&SD memory no longer shows up under Windows Explorer.
I've been searching for a fix/workaround for hours (thanks Google for this quality time!). Some of the things I've tried that didn't work:
- enable/disable USB debugging mode under developer options
- change "USB configuration" (under Developer Options) to "MTP" and to all other options there
- use a different USB cable and USB port on the laptop
- search for apps on the Play Store that can help with this (didn't find any that actually do the job)
Connecting Android phones to Windows laptops to access their internal memory through USB cable has (bemusingly!) been a problem with this ****ty OS as long as I can remember, so it doesn't surprise me that users are having to spend even more time now to get it to work again.
Any suggestions much appreciated!
Click to expand...
Click to collapse
Hi friend just dial *#0808# choose MTP+ADB click OK and Reboot your device . Try to connect again with usb cable in PC . Good luck
Teddy Lo said:
Hi friend just dial *#0808# choose MTP+ADB click OK and Reboot your device . Try to connect again with usb cable in PC . Good luck
Click to expand...
Click to collapse
Thanks - I tried that, but I still don't see the phone's memory as a USB drive, nor any permission prompt on the phone once I connect it.
longtalker said:
Thanks - I tried that, but I still don't see the phone's memory as a USB drive, nor any permission prompt on the phone once I connect it.
Click to expand...
Click to collapse
Try to reinstall drivers ,uninstall all previously installed use USBDEVIEW tool .
https://www.nirsoft.net/utils/usb_devices_view.html
Before I do that, I should note that, when I tried on a different Win 10 PC, I get the USB drive back no problem, so the problem is Windows/PC-related, it seems?!
Turns out that, when using another USB cable, the phone is once again seen as a USB drive. I didn't think the cable could make a difference! Hope it helps others
Hello All,
Years ago, I installed CyanogenMod 10.1. The TP works OK. Here's the info:
- Android version: 4.2.2
- Kernel version: 2.6.35-cyanogenmod [email protected] #1 Tue Dec 10 17:10:10 CST 2013
- CPU: ARMv7 Processor rev 2 (v7l)
- CyanogenMod version: 10.1-20131210-SNAPSHOT-VPN-tenderloin
- Build date: Tue Dec 10 17:05:54 CST 2013
- Build number: cm_tenderloin-userdebug 4.2.2 JDQ39E 8d5ffaac34 test-keys
From what I know, external USB can be connected to HP TP via OTG cable and external power. So in an effort to use this HP TP (which has been collecting dust) as a digital frame, I follow this link:
https://www.youtube.com/watch?v=Nc7tlPwFQpg&t=198s
The guy has links to buy OTG cable and Y adapter:
https://www.amazon.com/gp/product/B005QX7KYU/ref=oh_o02_s00_i00_details
https://www.amazon.com/gp/product/B0041CFFBM/ref=oh_o01_s00_i00_details
So I bought (2) OTG cables and (2) Y adapters from the above links.
The power adapter I use is a working 2A one (brand name: Amazon). I formatted the USB thumb drive. Then loaded a few jpeg files to the thumb drive.
When I followed the above Youtube video to plug the USB drive, the app 'ES Explorer' does recognize the USB drive but it shows 'Empty folder'. I changed out OTG and Y cables but still the same: the HP Touchpad won't recognize the jpeg files on the thumb drive.
Please tell me what I did wrong and show me how to fix it.
I'm open to two solutions:
1) Open the HP TP up and solder a SD/micro SD module (I'm a circuit technician and have no problems doing that).
2) Wipe out the HP TP and install another Android version newer and/or capable of reading external thumb drives (I hate wasting a nostalgic HP TP).
Thank you very much for your help.
quangmsc said:
1) Open the HP TP up and solder a SD/micro SD module (I'm a circuit technician and have no problems doing that).
2) Wipe out the HP TP and install another Android version newer and/or capable of reading external thumb drives (I hate wasting a nostalgic HP TP).
Thank you very much for your help.
Click to expand...
Click to collapse
This is the OTG cable that I use and another one that could not find on line:
Click HERE for 4 Port Micro USB
I had use it with a 16GB USB drive on Evervolv 7.1.2 for curiosity to see how it works and I was very impress with the speed. I was able to play movies from the USB drive and at the same time also connected an USB Ethernet ( I had to incorporate the driver into the kernel ).
It is possible to have more than one USB device connected at same time, like USB drive, Keyboard, mouse and wire Ethernet. The tablet is like a laptop with connections by wire.
If ES Explore recognize the USB drive then the OTG cables is good, but you need another software to be able to read the files. I tried it Total Commander and there was another software to mount the partition, I think it was Paragon:
https://play.google.com/store/apps/details?id=com.paragon.tcplugins_ntfs_ro&hl=en_US
Install that to mount the USB drive and then the files should be available in ES Explore if not then try Total Commander and use the plug in for it.
Thanks but unfortunately none of those work because those methods only work for at least Android 4.4. Please let me know how to 1) wipe the TP and 2) find a stable and newer Android OS / CyanogenMod to install on the TP which will only be used as a digital frame and not anything else (no internet browsing, games, etc.).
All I see is this:
https://forum.xda-developers.com/hp-touchpad/development/rom-evervolv-hp-touchpad-t3923512
or
https://forum.xda-developers.com/hp-touchpad/development/rom-evervolv-7-0-0p1-wifi-t3456292
but both don't have step by step installation guides.
Thanks @HP_TOUCHPAD
quangmsc said:
Thanks but unfortunately none of those work because those methods only work for at least Android 4.4. Please let me know how to 1) wipe the TP and 2) find a stable and newer Android OS / CyanogenMod to install on the TP which will only be used as a digital frame and not anything else (no internet browsing, games, etc.).
Click to expand...
Click to collapse
If you want to easily wipe the tablet and make it a 100 % Android device and install any ROM then follow this guide.
There is a lot to read, but very simple, flash Automatic_Wipe_ALL and it does everything.
https://forum.xda-developers.com/hp-touchpad/general/hp-touchpad-optimize-android-swap-t3901773
The Tablet can read and write up to FOUR USB drive connected at the same time, attached are screenshots using Evervolv 7.1.2 with Total Commander and the plug in for the USB.
https://www.ghisler.com/android.htm
USB drive tested: 16G SandDisk, 16G Lexar, 8G Patriot
All three USB can be connected at the same time and be access using total commander file manager.
Also I plug in the MicroUSB Ethernet and works with the USB connected.
HP_TOUCHPAD said:
If you want to easily wipe the tablet and make it a 100 % Android device and install any ROM then follow this guide.
There is a lot to read, but very simple, flash Automatic_Wipe_ALL and it does everything.
https://forum.xda-developers.com/hp-touchpad/general/hp-touchpad-optimize-android-swap-t3901773
The Tablet can read and write up to FOUR USB drive connected at the same time, attached are screenshots using Evervolv 7.1.2 with Total Commander and the plug in for the USB.
https://www.ghisler.com/android.htm
USB drive tested: 16G SandDisk, 16G Lexar, 8G Patriot
All three USB can be connected at the same time and be access using total commander file manager.
Also I plug in the MicroUSB Ethernet and works with the USB connected.
Click to expand...
Click to collapse
Thanks. I downloaded 'TWRP Recovery Version 3.2' to my computer, unzip and copy the files to the HP TP root directory. Unplug the TP from computer. Turn off the TP completely then boot it up again. No recovery menu to choose other than WebOS Recovery and some other menu options unrelated to automatic wipe out. So I'm stuck there.
Can I use this one instead?
https://www.youtube.com/watch?v=VP-FH6fS2GI
He basically shows step by step how to uninstall everything by plugging the TP to a computer which already has Nova installed.
Part 2: Let's say everything is wiped out, which android version would you recommend given my simple use of the TP? This is Android Pie 9.0 on Youtube (same instructor): https://www.youtube.com/watch?v=hAuNSoe6euI
Thanks again.
quangmsc said:
Thanks. I downloaded 'TWRP Recovery Version 3.2' to my computer, unzip and copy the files to the HP TP root directory.
TWRP 3.2.1 needs to be flash using another recovery, if the uImage.Recovery is copy into boot then the file moboot.default needs to be edited and add uImage.Recovery to show in the moboot menu. It is best to flash it as it will create the entry for moboot menu. But now there is a copy there and the /boot maybe full and it needs to be clean.
Unplug the TP from computer. Turn off the TP completely then boot it up again. No recovery menu to choose other than WebOS Recovery and some other menu options unrelated to automatic wipe out. So I'm stuck there.
As mentioned the entry uImage.Recovery must be add to a file in the /boot partition.
Can I use this one instead?
https://www.youtube.com/watch?v=VP-FH6fS2GI
He basically shows step by step how to uninstall everything by plugging the TP to a computer which already has Nova installed.
Part 2: Let's say everything is wiped out, which android version would you recommend given my simple use of the TP? This is Android Pie 9.0 on Youtube (same instructor): https://www.youtube.com/watch?v=hAuNSoe6euI
Thanks again.
Click to expand...
Click to collapse
Follow this guide to Wipe it all, the only thing to do is one click and is done.
https://forum.xda-developers.com/hp-touchpad/general/hp-touchpad-novacom-repair-android-t3960435
boot the Linux ISO file into a PC or virtual machine, place the tablet in WebOS recovery mode connect the tablet to PC and click on Wipe ALL, then install any ROM.
I recommend Evervolv 7.1.2 as that is the one that I used for the screenshots with the USB connected.
Then go to this guide and install the ROM:
https://forum.xda-developers.com/hp-touchpad/general/hp-touchpad-optimize-android-swap-t3901773
To flash a ROM, copy the zip files to the Tablet and using TWRP select and flash.
If you have novacom install on your PC and know how to use it then follow this guide to wipe all.
https://forum.xda-developers.com/hp-touchpad/general/rom-guide-alternative-method-to-install-t3575861
All those options allows to load Wipe_All to have everything done automatically. Select the best option for you but the outcome is the same.
HP_TOUCHPAD said:
Follow this guide to Wipe it all, the only thing to do is one click and is done.
https://forum.xda-developers.com/hp-touchpad/general/hp-touchpad-novacom-repair-android-t3960435
boot the Linux ISO file into a PC or virtual machine, place the tablet in WebOS recovery mode connect the tablet to PC and click on Wipe ALL, then install any ROM.
I recommend Evervolv 7.1.2 as that is the one that I used for the screenshots with the USB connected.
Then go to this guide and install the ROM:
https://forum.xda-developers.com/hp-touchpad/general/hp-touchpad-optimize-android-swap-t3901773
To flash a ROM, copy the zip files to the Tablet and using TWRP select and flash.
If you have novacom install on your PC and know how to use it then follow this guide to wipe all.
https://forum.xda-developers.com/hp-touchpad/general/rom-guide-alternative-method-to-install-t3575861
All those options allows to load Wipe_All to have everything done automatically. Select the best option for you but the outcome is the same.
Click to expand...
Click to collapse
So I created a bootable USB drive having 'HP_Touchpad_Novacom_Repair_Android'. Change my laptop boot priority to USB and used 'unetbootin-windows-677' to 'Wipe All' the Android version. After that, every time the HP TP is booted, only a moboot 0.3.8 menu appears with these options:
- boot Recovery
- boot webOS recovery
- reboot
- shutdown
Now, I have downloaded these zip files:
- ev_tenderloin-7.1.2-nightly-2017.11.03
- HpTp_MaXtreme_1674_CPU_Universal_Optimize_Swap_Evervolv_7_1_2_Nougat
- open_gapps-arm-7.1-pico-20200520
I need to copy these zip files to the tablet but I don't know how: Turn the tablet on and select 'boot webOS recovery' and the white USB logo appears. Then connect the tablet to a laptop with Windows 10 running Then a message pops up 'We're setting up Palm device'. I open Windows Explorer to copy the zip files to the tablet but there's no 'Palm' folder (before Android was wiped out, I do see 'Palm' folder in Windows Explorer). Can you tell me how to copy the zip files to the table then? Should I copy those zip files to the bootable usb thumb drive then run unetbootin-windows-677 on the laptopn and copy the zip files over to the tablet?
quangmsc said:
So I created a bootable USB drive having 'HP_Touchpad_Novacom_Repair_Android'. Change my laptop boot priority to USB and used 'unetbootin-windows-677' to 'Wipe All' the Android version. After that, every time the HP TP is booted, only a moboot 0.3.8 menu appears with these options:
Great Job! now you have a Linux OS with built in Novacom drivers that will always work no matter what.
- boot Recovery
- boot webOS recovery
- reboot
- shutdown
The tablet has been completely wipe and only the Android partitions were created.
boot Recovery is TWRP 3.2..1 by @flitman that allows to flash any Android ROM and works 100 % all the time.
Now, I have downloaded these zip files:
- ev_tenderloin-7.1.2-nightly-2017.11.03
- HpTp_MaXtreme_1674_CPU_Universal_Optimize_Swap_Evervolv_7_1_2_Nougat
- open_gapps-arm-7.1-pico-20200520
I need to copy these zip files to the tablet but I don't know how: Turn the tablet on and select 'boot webOS recovery' and the white USB logo appears. Then connect the tablet to a laptop with Windows 10 running Then a message pops up 'We're setting up Palm device'. I open Windows Explorer to copy the zip files to the tablet but there's no 'Palm' folder (before Android was wiped out, I do see 'Palm' folder in Windows Explorer). Can you tell me how to copy the zip files to the table then? Should I copy those zip files to the bootable usb thumb drive then run unetbootin-windows-677 on the laptopn and copy the zip files over to the tablet?
Click to expand...
Click to collapse
WebOS Recovery is only use to repair the Tablet ( troubleshooting )
Recovery TWRP is the App that is use to flash any ROM.
Boot into TWRP connect the Tablet to any PC, Micro SD will show ( is like a portable USB storage ) It works on any PC there is no need to have the novacom drivers install.
Copy all the zip files to the Micro SD card or USB ( it has different names )
Go to TWRP on the Tablet and select the zip files to flash, when done reboot.
It is very simple the only thing to do is select and flash that is it.
Here are some youtube videos about HP Touchpad Novacom Repair for Android, that shows how is use:
https://www.youtube.com/watch?v=4pKNPYKGp-o
https://www.youtube.com/watch?v=A9M-peqf45I
HP_TOUCHPAD said:
WebOS Recovery is only use to repair the Tablet ( troubleshooting )
Recovery TWRP is the App that is use to flash any ROM.
Boot into TWRP connect the Tablet to any PC, Micro SD will show ( is like a portable USB storage ) It works on any PC there is no need to have the novacom drivers install.
Copy all the zip files to the Micro SD card or USB ( it has different names )
Go to TWRP on the Tablet and select the zip files to flash, when done reboot.
It is very simple the only thing to do is select and flash that is it.
Here are some youtube videos about HP Touchpad Novacom Repair for Android, that shows how is use:
https://www.youtube.com/watch?v=4pKNPYKGp-o
https://www.youtube.com/watch?v=A9M-peqf45I
Click to expand...
Click to collapse
Thanks a lot. I was able to installed Nougat on TP. Try to install Paragon exfat/ntfs software but the software shows it's not compatible with HP TP Nougat 7. Installed Total Commander then install the plug-in (USB Stick, free trial btw) then the tablet restarted by itself. As it turns out, the battery drained from 50% to 0% right after installing the plug-in.
So now I'm monitoring the tablet to see if there are problems.
Also, System Storage and (Android Stock) Gallery both don't see the pictures of the usb thumb drive. The only one app can see the usb drive is Total Commander. I clicked on the pictures but there's no photo browsing app associated with Total Commander so I can't see the photo slides. If you happen to know such a photo viewing app compatible with Total Commander, please let me know.
quangmsc said:
Thanks a lot. I was able to installed Nougat on TP. Try to install Paragon exfat/ntfs software but the software shows it's not compatible with HP TP Nougat 7. Installed Total Commander then install the plug-in (USB Stick, free trial btw) then the tablet restarted by itself. As it turns out, the battery drained from 50% to 0% right after installing the plug-in.
So now I'm monitoring the tablet to see if there are problems.
Always keep the tablet charging, it will prolong the battery life.
Also, System Storage and (Android Stock) Gallery both don't see the pictures of the usb thumb drive. The only one app can see the usb drive is Total Commander. I clicked on the pictures but there's no photo browsing app associated with Total Commander so I can't see the photo slides. If you happen to know such a photo viewing app compatible with Total Commander, please let me know.
Click to expand...
Click to collapse
That is a limitation of Android but some apps would be able to read the USB, to look here:
https://forums.androidcentral.com/samsung-galaxy-tab-s-10-5/563616-possible-view-videos-photo-slide-show-usb-connected-flash-drive-card-reader.html
I know that using a USB stick is the most cost effective and easy way to set up, but also keep in mind a wireless hard drive, of you can set up a share folder from a PC and connect the Tablet and show all the photos from a network location. There are many ways the tablet can produce a slide show.
HP_TOUCHPAD said:
That is a limitation of Android but some apps would be able to read the USB, to look here:
https://forums.androidcentral.com/samsung-galaxy-tab-s-10-5/563616-possible-view-videos-photo-slide-show-usb-connected-flash-drive-card-reader.html
I know that using a USB stick is the most cost effective and easy way to set up, but also keep in mind a wireless hard drive, of you can set up a share folder from a PC and connect the Tablet and show all the photos from a network location. There are many ways the tablet can produce a slide show.
Click to expand...
Click to collapse
When I click on a photo on USB stick in Total Commander, a menu pops up 'with 2 options:
- Download+Open with
- Download+Edit
But whatever option you choose, nothing happens. It can't even view a photo. So I guess Total Commander is trying to associate a photo with an photo viewing app but it can't find such an app.
For ES Explorer, it can open a photo but no slideshow ( I heard that previous version of ES Explorer had that feature) so you have to manually click on the next photo.
Don't bother with Google Photos because it can't detect photos on the USB stick. So for now, I copy some of my pictures on the HP TP internal storage and play the slideshow by running Google Photos.
Hoping one day either ES Explorer or Total Commander can do slideshows.
Thanks for all your tremendous help.
No text.