Related
Ok, so last night my phone downloaded the update (guessing Gingerbread). I'm still running 2.2.1 on my Thunderbolt, as I was out of the country for the past few months. I caught the phone before it completed the installation and thought that if I removed the PG05IMG.zip file from the sd card, that would prevent it from being able to install the update. I turned the phone back on and it began to attempt to install the update again. I would like to flash a new ROM to the phone (as I was simply rooted without a custom ROM before) so that I am running 2.3+ but I don't want to have to re-root the phone. I would like to be able to back everything up before I flash a new ROM. How do I prevent the phone from installing the OTA update that was inadvertently downloaded last night , which will unroot my phone??
Please help! Thank you
Not sure if you can stop it at this point and since the phone can still be rooted with the GB update, it may just be easiest to let it go.
Otherwise, if you really want to stop the update, you probably need to boot into Fastboot and find the files that are part of the update. From my Eris days, the OTA update isn't packaged up in the PG05IMG.zip file that you removed. I'm not sure where the files are or what files are the ones you need to delete though...
Someone fee free to correct me, but if you flash the CWM recovery it will prevent the update from happening?
Essentially, I just use the phone for wireless tether, so that's mainly why I root. Doubt that changes much of anything...
hallstevenson said:
Not sure if you can stop it at this point and since the phone can still be rooted with the GB update, it may just be easiest to let it go.
Otherwise, if you really want to stop the update, you probably need to boot into Fastboot and find the files that are part of the update. From my Eris days, the OTA update isn't packaged up in the PG05IMG.zip file that you removed. I'm not sure where the files are or what files are the ones you need to delete though...
Click to expand...
Click to collapse
So I tried to let the update take, but unfortunately it gets stuck at the screen with Andy and the exclamation point!!
Ughhh.... help! Now I have no workable phone..
Can you still boot into recovery? I had read that clearing cache and dalvik fixes this...
jv
tomgillotti said:
So I tried to let the update take, but unfortunately it gets stuck at the screen with Andy and the exclamation point!!
Ughhh.... help! Now I have no workable phone..
Click to expand...
Click to collapse
That's a common problem as I recall from a few weeks back. I saw threads about it but never read them as I wasn't affected. I don't know if it's a dead-end or easily fixed or complicated to fix...
Sent from my ADR6400L using XDA App
johnnyv5 said:
Can you still boot into recovery? I had read that clearing cache and dalvik fixes this...
jv
Click to expand...
Click to collapse
I stumbled into clockwork recovery earlier... I will see what I can accomplish if I can make it back there!
Side note.. I can get into the phone for a minute or so before it restarts again.
tomgillotti said:
I stumbled into clockwork recovery earlier... I will see what I can accomplish if I can make it back there!
Side note.. I can get into the phone for a minute or so before it restarts again.
Click to expand...
Click to collapse
johnnyv5 said:
Can you still boot into recovery? I had read that clearing cache and dalvik fixes this...
jv
Click to expand...
Click to collapse
Two thumbs up! So far, so good as for this recommendation. Thank you!!!
Any thoughts on how to prevent VZW from pushing this update from now on?
Also need the best 2.3+ ROM... or is CM9 with 4.0 on the way??
Thread moved to Q & A
tomgillotti said:
Any thoughts on how to prevent VZW from pushing this update from now on?
Click to expand...
Click to collapse
Install a non-stock ROM. Don't worry, you can get Sense-based ones that won't be anything "new".
It appears that VZW will eventually force the update so there's no way that I'm aware of to stop it while running stock (even rooted stock).
tomgillotti said:
Two thumbs up! So far, so good as for this recommendation. Thank you!!!
Any thoughts on how to prevent VZW from pushing this update from now on?
Also need the best 2.3+ ROM... or is CM9 with 4.0 on the way??
Click to expand...
Click to collapse
Flash a ROM that has the update. There are a few around here that are 2.11.605.5 that you flash in Recovery so that it'll stop bugging you to update. Just pick one that is already rooted. You can do a backup of your currrent rom, flash the 2.11.605.5 then restore your data and your all set....
jv
There are a couple threads on preventing ota updates. A quick search will tell you what file to rename and how to.
Sent from my infected thunderbolt.
the last thing i did was open this app called ROM manager, and tried to backup my ROM i believe. It took me to the "android system recovery" menu, and i didnt really know what i was doing, so i selected "reinstall packages", and then "reboot system now", and then it reset my phone and now all it does it show the samsung vibrant screen, then I get a small vibration, followed by a pause, then a triple vibration. I am able to go back to the system recovery menu, and nothing different happens when i go to "reboot system now" I even deleted all user data! im kind of a noob, so i would appreciate if someone would help me out here. Thanks.
iOwnNoobs 713 said:
the last thing i did was open this app called ROM manager, and tried to backup my ROM i believe. It took me to the "android system recovery" menu, and i didnt really know what i was doing, so i selected "reinstall packages", and then "reboot system now", and then it reset my phone and now all it does it show the samsung vibrant screen, then I get a small vibration, followed by a pause, then a triple vibration. I am able to go back to the system recovery menu, and nothing different happens when i go to "reboot system now" I even deleted all user data! im kind of a noob, so i would appreciate if someone would help me out here. Thanks.
Click to expand...
Click to collapse
your phone is not brick.. I recommend you to read this thread
http://forum.xda-developers.com/showthread.php?t=848737&highlight=bricked
Tool for beginner
http://forum.xda-developers.com/showthread.php?t=954509&highlight=bricked
Mostdef said:
your phone is not brick.. I recommend you to read this thread
http://forum.xda-developers.com/showthread.php?t=848737&highlight=bricked
Tool for beginner
http://forum.xda-developers.com/showthread.php?t=954509&highlight=bricked
Click to expand...
Click to collapse
Thanks man, i appreciate the help! but the download link doesn't work with the AIO Link
Go to Oldecrow's post a few back. He has it running on his own server. Or at least he did.
Edit:: Here is the post
im trying to download in the Fix that you send me but their download links are all down o.o got any idea why?
iOwnNoobs 713 said:
im trying to download in the Fix that you send me but their download links are all down o.o got any idea why?
Click to expand...
Click to collapse
This AIO tool have everything in it JFD,Pit and Update
http://crescent-pc.com/androidpub/In...lbox 2.5.msi
On AIO click back to stock and read the instruction. That way u can go back in stock. Once your phone return in stock. Then next step click root your phone. Then next step flash custom rom. I recommend you to follow every step from AIO
Not to sound like a **** or anything; but next time you might wanna do a little research and reading before you actually do things to your phone since you "didn't really know what you were doing".
what do i put in Odin, for BOOTLOADER, PHONE, and CSC?
in the PIT i have the PIT.pit selected and in the PDA i have the PDA.tar selected but dont know what to select in them up there
Nvm! i got it, Thanks for the help! and im guessing i have to root it again? huh? xD
I took the OTA MJ7 4.3 update and then tried doing the M1I root technique and soft bricked my phone. I know some have tried that and others have just had issues where their phone won't boot after taking the OTA. I will share the steps I did that fixed my phone!
1. Place the update.zip from this thread (http://forum.xda-developers.com/showthread.php?t=2502591) on an SD card. You may have to put it in another phone or into an SD card reader.
2. Press and hold volume up + home button for a couple of seconds
3. While still holding those buttons press and hold the power key until the phone vibrates, then release the power key only
4. Your phone should boot into Android System Recovery. Go to Apply update from external sd card.
5. Select update.zip and apply it
6. It will reboot your phone, it will still not boot properly. Remove the battery and follow steps 2-3 again.
7. This time, select Wipe data/factory reset.
8. Once complete reboot your phone, it will boot this time!
I'm so excited my S4 works again!! Hope this helps you guys!
antisomnic said:
I took the OTA MJ7 4.3 update and then tried doing the M1I root technique and soft bricked my phone. I know some have tried that and others have just had issues where their phone won't boot after taking the OTA. I will share the steps I did that fixed my phone!
1. Place the update.zip from this thread (http://forum.xda-developers.com/showthread.php?t=2502591) on an SD card. You may have to put it in another phone or into an SD card reader.
2. Press and hold volume up + home button for a couple of seconds
3. While still holding those buttons press and hold the power key until the phone vibrates, then release the power key only
4. Your phone should boot into Android System Recovery. Go to Apply update from external sd card.
5. Select update.zip and apply it
6. It will reboot your phone, it will still not boot properly. Remove the battery and follow steps 2-3 again.
7. This time, select Wipe data/factory reset.
8. Once complete reboot your phone, it will boot this time!
I'm so excited my S4 works again!! Hope this helps you guys!
Click to expand...
Click to collapse
Cool! Glad you are up and running.
The MI1 root method flashed a MI1 ROM, so if you are on MJ7, you create a soft brick by trying to root.
Don't do that!!!!
Right. I figured that out the hard way. At least there is a solution
Sent from my SCH-I545 using xda app-developers app
Were you able to boot into android recovery while soft bricked? I experienced the same issue and booted into recovery (volume up, center button, and power button while power is off) and simply did a factory reset. I was able to keep root and fix whatever had gone wrong.
Nevermind, read wrong.
Can be deleted.
tried this.
instead of recovery i get : firmware upgrade encountered an issue. please select recovery mode in kies
slackwaresupport said:
tried this.
instead of recovery i get : firmware upgrade encountered an issue. please select recovery mode in kies
Click to expand...
Click to collapse
I had this happen too. I had to use ODIN to restore to factory MI1 then did OTA to MJ7.
teinwhite said:
I had this happen too. I had to use ODIN to restore to factory MI1 then did OTA to MJ7.
Click to expand...
Click to collapse
just tried to flash ml1.. failed on system.img.ext4
slackwaresupport said:
just tried to flash ml1.. failed on system.img.ext4
Click to expand...
Click to collapse
Did you take the MJ7 update and then try to go back to Ml1? I thought that is the error you get if you do try to go back.
-Lawless said:
Did you take the MJ7 update and then try to go back to Ml1? I thought that is the error you get if you do try to go back.
Click to expand...
Click to collapse
I was in that boat. Took the OTA and foolishly tried Root de la Vega. Couldn't flash back to MI1 (failed as described) but the new no-wipe MJ7 Odin file saved the day. Good as new (but still unrooted).
http://forum.xda-developers.com/showthread.php?t=2507217
I got root with this post: http://forum.xda-developers.com/showpost.php?p=47187227&postcount=84
As other say, it seems to be bad.
I cleared this post and if you wish, you can check the first line and open the post to see how it goes.
TheJumpingBean said:
You will prolly get banned for this! LOL Either way, it does work. I did it on mine, and all of that is true.
Click to expand...
Click to collapse
Why would i get banned ? Did i do something wrong by sharing the knowledge? I have not taken credit for this and also added the link to the post so it can be verified ;
OK, i removed the link and whoever needs it, can use Google to find it.
Trak-X said:
Why would i get banned ? Did i do something wrong by sharing the knowledge? I have not taken credit for this and also added the link to the post so it can be verified ;
OK, i removed the link and whoever needs it, can use Google to find it.
Click to expand...
Click to collapse
No there were some xda admins or w/e that said the links 2 this root arent allowed on XDA ne more. Not sure why... I used it and it worked perfectly. oh well. Sowwy
Moderator @Naddict posted this one post prior in that thread. Read up and learn about the risk you are exposing yourself to.
Be aware that as of this moment XDA has deemed the Kingo root method and Vroot method are not allowed on XDA. There are concerns with the information which is collected during the root method by the exploit. It is not about a continuous malware which may affect your device but about important information shared about your device, serial numbers etc during the root process which could be huge securities issues. You have all been warned.
Click to expand...
Click to collapse
This post, courtesy of open1your1eyes, provides some detail from the bright guys that keep us rooted and happy.
We finally have some details on these root methods:
https://twitter.com/TeamAndIRC/status/397767301811802112
TLDR: Uses "Romaster" root method
Click to expand...
Click to collapse
I would take their caution to heart if I was in your position.
--OctOS Powered VZW GS4 Dev Edition
Nice to see the wheels turning here guys. Thumbs up
I dont know what to think of this. I did the root the first day, and haven't had any problems. I have talked to a few devs and Android engineers who have checked it out and don't think its a threat. I did manage to update mine to SuperSU from the chinese superuser, just in case...
So, I dont know enough to tell you if it is or isnt dangerous, but I can tell u that Im on like day 5 with no issues. I went ahead the first day and installed DroidWall. DroidWall doesnt have any records of su or the chinese superuser trying to access anything, and netstat doesnt show that the su or superuser apps are listening for connections.
I kinda wish we could get some closure on whats happening...
teinwhite said:
I had this happen too. I had to use ODIN to restore to factory MI1 then did OTA to MJ7.
Click to expand...
Click to collapse
Im go the problem where it says Firmware upgrade encountered an issue. how do i fix this? and can u provide a link for the stock firmwares please the mi1 and mj7.
TheJumpingBean said:
I dont know what to think of this. I did the root the first day, and haven't had any problems. I have talked to a few devs and Android engineers who have checked it out and don't think its a threat. I did manage to update mine to SuperSU from the chinese superuser, just in case...
So, I dont know enough to tell you if it is or isnt dangerous, but I can tell u that Im on like day 5 with no issues. I went ahead the first day and installed DroidWall. DroidWall doesnt have any records of su or the chinese superuser trying to access anything, and netstat doesnt show that the su or superuser apps are listening for connections.
I kinda wish we could get some closure on whats happening...
Click to expand...
Click to collapse
How'd you get supersu to work and remove Chinese superuser?
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Hey all, I got a Verizon Galaxy S4 16 gigs. I did the 4.3 OTA, then tried to go back to 4.2.2. I guess that soft bricked it. So do I have to use the MJ7 firmware to make my phone usable again? And if that works, is there any way to go back to 4.2.2? What do I do if it doesn't work?
Update: This worked beautifully, I'm now back to 4.3.
Hello XDA members,
I was hoping somebody would help me out, I'm fairly new when it comes to installing custom roms so I require your patience. I don't know how to install a custom rom onto my Bell Atrix HD MB886, everytime I try it says abortion failed, what can I do to fix this. I have wiped data and all that probably 5 times in the past week alone. I would like to know how to successfully install roms without errors. Both the times that I have done this I had my bootloader unlocked, and I had clockword recovery mod latest version 6.0.4.4. I bought an SD card today to help install the roms because otherwise I can't do it from my internal storage. I really hope somebody can help me out.
Regards,
Roger
riekkir said:
Hello XDA members,
I was hoping somebody would help me out, I'm fairly new when it comes to installing custom roms so I require your patience. I don't know how to install a custom rom onto my Bell Atrix HD MB886, everytime I try it says abortion failed, what can I do to fix this. I have wiped data and all that probably 5 times in the past week alone. I would like to know how to successfully install roms without errors. Both the times that I have done this I had my bootloader unlocked, and I had clockword recovery mod latest version 6.0.4.4. I bought an SD card today to help install the roms because otherwise I can't do it from my internal storage. I really hope somebody can help me out.
Regards,
Roger
Click to expand...
Click to collapse
Hi there. A failed abortion certainly seems like an issue... I guess I am not totally clear on the status here. You say that you had CWM. Do you still have it? Bootloader is still unlocked? What rom are you trying to install? Are you certain it's for the Bell version and not like the AT&T one? What is the exact error message?
es0tericcha0s said:
Hi there. A failed abortion certainly seems like an issue... I guess I am not totally clear on the status here. You say that you had CWM. Do you still have it? Bootloader is still unlocked? What rom are you trying to install? Are you certain it's for the Bell version and not like the AT&T one? What is the exact error message?
Click to expand...
Click to collapse
No I don't have it atm as I just wiped the data/cache last night but will I already have CWM, I just need to unlock the bootloader and try again...I'm trying to install this one:
Android 4.4.2 KitKat Mokee Rom, and it says the version is a nightly. Yes I'm positive it's the Bell Version as I purchased it at a Bell Store and my carrier is Bell. The error message is "Installation Aborted." It begins installing, and then halfway through I get that error message. How do I fix this?
I figured you knew what phone you had. I was wondering if you had a rom built for the Bell version vs an ATT one. But since you are using a CM based rom, it obviously doesn't matter. Curious as to why you are bothering with relocking the bootloader? But I suggest to either try a different version of the rom, or to change your recovery to one of the Philz Touch versions as that's what some of the other users in that thread for the rom for your phone were using. You can find them here:
http://goo.im/devs/philz_touch/CWM_Advanced_Edition/moto_msm8960
es0tericcha0s said:
I figured you knew what phone you had. I was wondering if you had a rom built for the Bell version vs an ATT one. But since you are using a CM based rom, it obviously doesn't matter. Curious as to why you are bothering with relocking the bootloader? But I suggest to either try a different version of the rom, or to change your recovery to one of the Philz Touch versions as that's what some of the other users in that thread for the rom for your phone were using. You can find them here:
Click to expand...
Click to collapse
No I was bothering to unlock it again, not lock it. Where can I find different versions for the 4.4.2 Mokee Rom? I've tried using the Philz Touch version: Motorola Atrix HD One Click Philz recovery installer and when I tried it a couple of times it said it failed to install although I'm not sure why. I came across these images the other day but how do I use the .img files on my device, as I'm not sure to proceed from here once I have them downloaded.
riekkir said:
No I was bothering to unlock it again, not lock it. Where can I find different versions for the 4.4.2 Mokee Rom? I've tried using the Philz Touch version: Motorola Atrix HD One Click Philz recovery installer and when I tried it a couple of times it said it failed to install although I'm not sure why. I came across these images the other day but how do I use the .img files on my device, as I'm not sure to proceed from here once I have them downloaded.
Click to expand...
Click to collapse
I was curious as why you relocked it in the first place.
Where are you getting Mokee from that doesn't have a link to their Downloads?
http://forum.xda-developers.com/showthread.php?t=2619489
For installing recovery:
http://forum.xda-developers.com/showthread.php?t=2262726
es0tericcha0s said:
I was curious as why you relocked it in the first place.
Where are you getting Mokee from that doesn't have a link to their Downloads?
For installing recovery:
Click to expand...
Click to collapse
thanks will try this out and let you know later how it works! I download the custom rom from true android blogspot.ca (can't post links just yet, annoying).
riekkir said:
thanks will try this out and let you know later how it works! I download the custom rom from true android blogspot.ca (can't post links just yet, annoying).
Click to expand...
Click to collapse
Right on. Well, you should bookmark the thread here on XDA because that's typically where the action happens.
es0tericcha0s said:
Right on. Well, you should bookmark the thread here on XDA because that's typically where the action happens.
Click to expand...
Click to collapse
Okay so I'm trying it now and the program won't even open :/
Odd. I just downloaded it to test and I didn't have any issues. If you can't get the actual application / exe file to open, then just use the Main-Skip.bat. Does the same thing.
If it doesn't open still, make sure that you have your anti-virus off as sometimes those interfere with programs like this. Might also try as admin.
es0tericcha0s said:
Odd. I just downloaded it to test and I didn't have any issues. If you can't get the actual application / exe file to open, then just use the Main-Skip.bat. Does the same thing.
If it doesn't open still, make sure that you have your anti-virus off as sometimes those interfere with programs like this. Might also try as admin.
Click to expand...
Click to collapse
Okay I wasn't looking at the actual .exe sorry, I got it to work and all I installed the Philz One Touch Recovery from that program, just downloaded a different rom and all and then I select the apply update from external storage and when it gets to the verifying update package, it gave me the same error message as yesterday, Installation Aborted.
So again, how do I fix this, am I doing something wrong? Why won't my custom rom install?
riekkir said:
Okay I wasn't looking at the actual .exe sorry, I got it to work and all I installed the Philz One Touch Recovery from that program, just downloaded a different rom and all and then I select the apply update from external storage and when it gets to the verifying update package, it gave me the same error message as yesterday, Installation Aborted.
So again, how do I fix this, am I doing something wrong? Why won't my custom rom install?
Click to expand...
Click to collapse
I don't think that is the most updated version. What's the version number of the recovery that was installed? It should be listed on the main page of it when you boot there. I was suggesting to use one of the new ones. It might have something to do with the SELinux support that KK roms need. You just have to put the img file in the tools folder and rename the new one the same. But here's no other error that shows up other than Installation Aborted? I was thinking usually it would have an error code or some other message.Have you checked the md5 of the rom zip to make sure it's not corrupted (if the dev provided it)?
es0tericcha0s said:
I don't think that is the most updated version. What's the version number of the recovery that was installed? It should be listed on the main page of it when you boot there. I was suggesting to use one of the new ones. It might have something to do with the SELinux support that KK roms need. You just have to put the img file in the tools folder and rename the new one the same. But here's no other error that shows up other than Installation Aborted? I was thinking usually it would have an error code or some other message.Have you checked the md5 of the rom zip to make sure it's not corrupted (if the dev provided it)?
Click to expand...
Click to collapse
Use one of the new versions of that program or to use the latest CWM which I have been. Okay I really don't know how to do that and where to move it to, how do I do such a thing? No it just says Installation Aborted... How would I do that? And yes I downloaded the new rom directly from his site.
riekkir said:
Use one of the new versions of that program or to use the latest CWM which I have been. Okay I really don't know how to do that and where to move it to, how do I do such a thing? No it just says Installation Aborted... How would I do that? And yes I downloaded the new rom directly from his site.
Click to expand...
Click to collapse
Look in the tools folder of the zip you downloaded. Download the newest Philz Touch img from the other link from earlier. Rename it to replace the one in the tools folder. Redo the recovery install. But you didn't say what version you already have.
es0tericcha0s said:
Look in the tools folder of the zip you downloaded. Download the newest Philz Touch img from the other link from earlier. Rename it to replace the one in the tools folder. Redo the recovery install. But you didn't say what version you already have.
Click to expand...
Click to collapse
Okay that did the trick, properly got philz recovery installed, did the install again, this time it worked, clicked reboot and now it's stuck at the Dual Core bootlogo screen
riekkir said:
Okay that did the trick, properly got philz recovery installed, did the install again, this time it worked, clicked reboot and now it's stuck at the Dual Core bootlogo screen
Click to expand...
Click to collapse
Did you do a full wipe, including wiping /system?
If you didn't, it should be under Mounts and Storage > Format /system of something of that sort.
es0tericcha0s said:
Did you do a full wipe, including wiping /system?
If you didn't, it should be under Mounts and Storage > Format /system of something of that sort.
Click to expand...
Click to collapse
No I forgot to do that dammit, can't get into recovery mode and my computer doesn't recognize my phone now, think I bricked it.
riekkir said:
No I forgot to do that dammit, can't get into recovery mode and my computer doesn't recognize my phone now, think I bricked it.
Click to expand...
Click to collapse
Pop the battery out for a bit, then pop it back in and hold Volume Down while powering up. Should get you into fastboot where you can skip to the recovery.
es0tericcha0s said:
Pop the battery out for a bit, then pop it back in and hold Volume Down while powering up. Should get you into fastboot where you can skip to the recovery.
Click to expand...
Click to collapse
The battery doesn't come out of my phone as you can't take the back off. I got into fast boot easily them selected recovery and nothing happened, I think my phone is screwed
riekkir said:
The battery doesn't come out of my phone as you can't take the back off. I got into fast boot easily them selected recovery and nothing happened, I think my phone is screwed
Click to expand...
Click to collapse
Oh yea, forgot you have to undo the screws on the bottom. So you scroll down to hit recovery and use the Power button to select and it doesn't do anything? That's odd.. Try and reflash the recovery since you can still get to fastboot. If that doesn't work, you're not totally screwed since you can still get to fastboot, that means you should be able to restore it to stock and start over.
Alternatively, if you have fastboot set up, you could make sure that philz touch is in the fastboot folder and use this command:
fastboot boot recovery nameofphilztouchfile.img
If you don't have fastboot, then just grab this one: http://forum.xda-developers.com/showthread.php?t=2317790 , drop the recovery img in that folder and open the CMD prompt on your computer and change directories to it and run the command.
I downloaded the OTA Update file but when I press it says:
Low battery. The devices battery should be more than 15%
But I have 87%, I also tried reboot. I don't have cwm to clear battery stats
So what should I do
mobihack said:
I downloaded the OTA Update file but when I press it says:
Low battery. The devices battery should be more than 15%
But I have 87%, I also tried reboot. I don't have cwm to clear battery stats
So what should I do
Click to expand...
Click to collapse
try to refresh battery status in settings
Wait
THANKS IS NOT SOMETHING TO SAVE, IT'S SOMETHING TO GIVE OUT
Give detailed explanation. I am on jb thanx
THANKS IS NOT SOMETHING TO SAVE, IT'S SOMETHING TO GIVE OUT
You should install the update via the PC. It's better that way. Installs done via the PC typically have less issues than OTAs plus, you don't have to worry about the stupid OTA system saying your phone isn't ready.
Also tried clearing cache of app
THANKS IS NOT SOMETHING TO SAVE, IT'S SOMETHING TO GIVE OUT
es0tericcha0s said:
You should install the update via the PC. It's better that way. Installs done via the PC typically have less issues than OTAs plus, you don't have to worry about the stupid OTA system saying your phone isn't ready.
Click to expand...
Click to collapse
I am on limited net connection. I downloaded the 120mb file. Any way to flash it now. I got the update.zip. Will it work by applying from default recovery
THANKS IS NOT SOMETHING TO SAVE, IT'S SOMETHING TO GIVE OUT
I am gonna try update via recovery
No luck. My recovery uses some signature check
THANKS IS NOT SOMETHING TO SAVE, IT'S SOMETHING TO GIVE OUT
If you have the correct update.zip and the stock recovery, then it should work. All recoveries should have a signature check to prevent people from trying to install the wrong things. What phone do you have?
Bro I have grand 2. It is very secure
THANKS IS NOT SOMETHING TO SAVE, IT'S SOMETHING TO GIVE OUT
mobihack said:
No luck. My recovery uses some signature check
THANKS IS NOT SOMETHING TO SAVE, IT'S SOMETHING TO GIVE OUT
Click to expand...
Click to collapse
hey Don't try to spam
moderators will close the thread
Sorry.
THANKS IS NOT SOMETHING TO SAVE, IT'S SOMETHING TO GIVE OUT
mobihack said:
Sorry.
THANKS IS NOT SOMETHING TO SAVE, IT'S SOMETHING TO GIVE OUT
Click to expand...
Click to collapse
update ota using kies
Ok I will try
THANKS IS NOT SOMETHING TO SAVE, IT'S SOMETHING TO GIVE OUT
mobihack said:
Ok I will try
THANKS IS NOT SOMETHING TO SAVE, IT'S SOMETHING TO GIVE OUT
Click to expand...
Click to collapse
:good:
Thanks guys I solved the problem. I was using a root cloaking software. But this software blocks many requests like su, am,pm, etc
Removed it and update worked good as ever
mobihack said:
Thanks guys I solved the problem. I was using a root cloaking software. But this software blocks many requests like su, am,pm, etc
Removed it and update worked good as ever
Click to expand...
Click to collapse
:good: