After resetting my account (old method) stuck in the logo and then in fastboot, I tried installing several firmware with umt but it remains the same.
Hey bro try the Mi flash for flashing stock rom Asaf for not bricking device
i am flash mi flash fastboot mode .Mi Flash Errror - "Not Allowed in Locked State
Phone hasn't unlocked the bootloader yet? Until it does, there's no way.
dhanyasrimobiles said:
i am flash mi flash fastboot mode .Mi Flash Errror - "Not Allowed in Locked State
Click to expand...
Click to collapse
Locked state or snapshotted state
dhanyasrimobiles said:
i am flash mi flash fastboot mode .Mi Flash Errror - "Not Allowed in Locked State
Click to expand...
Click to collapse
If there is an error like this as shown in figure then go to fastboot mode and use the command:- fastboot.exe snapshot-update cancel and then try to flash the stock rom.1st image shows the error.2nd image shows the written solution done by another person and then i used to get out of this problem.3rd image shows the adb command and it's result
StaryMuz said:
Phone hasn't unlocked the bootloader yet? Until it does, there's no way.
Click to expand...
Click to collapse
How to unlock bootloader
Het789209 said:
Locked state or snapshotted state
Click to expand...
Click to collapse
Locked state
Bootloader can only be unlocked by applying to the manufacturer - Xiaomi using its unlocking application. After registering with the manufacturer and then requesting an unlock, you will have to wait one week and then the unlock will be enabled.
Related
Hello, my Redmi Note 3 is a kate version (Special Edition).
I can't boot with any ROM. I have tested official MIUI roms, Xiaomi EU roms, Lineage OS the latest, Nitrogen and Lineage OS 13 unofficial.
I can go to the recovery and fastboot but when I turn on the phone it shows the MI logo for 1 second and turn off automatically.
If I charge the phone it shows the percentage.
The problem here is I can't boot ROM but recovery and fastboot work. Any solutions please ?
EDIT: The problem appear when I have flash the Lineage OS 13 unofficial. The boot was infinite (I fell asleep so I don't really know) and I fell asleep before my battery completely discharged (because of the infinite boot I think). In the morning I have charged my phone and didn't work now.
Try flashing a fastboot rom via edl. If it boots, then unlock the bootloader officially and install twrp.
EDL flash it
Hello, thanks for answers. I have already tested the EDL mode and don't work... The MI logo appears for 1 second only
Thats a good sign, it means your bootloader is locked.
Just unlock it
How can I unlock it please ?
eRalf said:
How can I unlock it please ?
Click to expand...
Click to collapse
If u unlocked before (officially)
Just go to fastboot mode and unlock it with mi unlock
I have never done it officially before, just unofficial due to a problem with Mi Unlock. What can I do? :/
Please help me
miflash edl flash or miunlock, no other way man...
So my phone is dead? :/
https://forum.xda-developers.com/re...-unofficially-install-zcx-twrp-t3586778/page7
Achyutem said:
https://forum.xda-developers.com/re...-unofficially-install-zcx-twrp-t3586778/page7
Click to expand...
Click to collapse
Hello, I have already unlocked unofficially but doesn't work. I can't unlock with cmd it says: oem unlock is not allowed. And I can't activate oem! I have tested miflashunlock for unlock officially and it says I don't have account on phone and I can't connect it ...
eRalf said:
Hello, I have already unlocked unofficially but doesn't work. I can't unlock with cmd it says: oem unlock is not allowed. And I can't activate oem! I have tested miflashunlock for unlock officially and it says I don't have account on phone and I can't connect it ...
Click to expand...
Click to collapse
flash fastboot rom(miui) and then do whatever u want to do man
Achyutem said:
flash fastboot rom(miui) and then do whatever u want to do man
Click to expand...
Click to collapse
he cant flash fast boot rom as his bootloader is locked.
gulshanstrider said:
he cant flash fast boot rom as his bootloader is locked.
Click to expand...
Click to collapse
u can flash fastboot stable rom..
---------- Post added at 04:17 PM ---------- Previous post was at 04:17 PM ----------
gulshanstrider said:
he cant flash fast boot rom as his bootloader is locked.
Click to expand...
Click to collapse
that too edl mode...not fastboot
Just flash a ROM via EDL mode. There's a batch file in the Guides and Discussion Section which boots your phone from fastboot to EDL mode. Don't worry, your phone is not yet dead.
Hi guys,
I got a bootloader unlocked ANE-LX2J and I want to lock it again but I dont know the next step.
I still have the bootloader unlock code and already flashed FULL OTA using TWRP and did factory reset.
So now, my P20 Lite is running pure stock again and ready to be locked right? or still not lol :silly:
Based on what I read here, after relocking bootloader using fastboot oem relock command, the warning/alert that shows when the device is booting is still there and I want to get rid of it.
Thanks :highfive:
RalphXVIII said:
Hi guys,
I got a bootloader unlocked ANE-LX2J and I want to lock it again but I dont know the next step.
I still have the bootloader unlock code and already flashed FULL OTA using TWRP and did factory reset.
So now, my P20 Lite is running pure stock again and ready to be locked right? or still not lol :silly:
Based on what I read here, after relocking bootloader using fastboot oem relock command, the warning/alert that shows when the device is booting is still there and I want to get rid of it.
Thanks :highfive:
Click to expand...
Click to collapse
Yes, you're ok to relock your bootloader if all partition and recovery are stock and your device is working without issues. After relock the recovery will do Factory Data Reset and no more warnings "your device has been unlocked and can't be trusted"
Boot into Fastboot&Rescue Mode and use this command:
Code:
fastboot oem relock [I][B]yourcode[/B][/I]
Then you enter into Lock Bootloader menu and just follow the instructions.
YES -
NO -
kilroystyx said:
Yes, you're ok to relock your bootloader if all partition and recovery are stock and your device is working without issues. After relock the recovery will do Factory Data Reset and no more warnings "your device has been unlocked and can't be trusted"
Boot into Fastboot&Rescue Mode and use this command:
Code:
fastboot oem relock [I][B]yourcode[/B][/I]
Then you enter into Lock Bootloader menu and just follow the instructions.
YES -
NO -
Click to expand...
Click to collapse
Does the Lock Bootloader menu will automatically show after relock command? I'll give it a shot later. Thanks :highfive:
RalphXVIII said:
Does the Lock Bootloader menu will automatically show after relock command? I'll give it a shot later. Thanks :highfive:
Click to expand...
Click to collapse
Yes, if your code is correct.
If my phone was rooted, will relocking the bootloader unroot it?
GJonas said:
If my phone was rooted, will relocking the bootloader unroot it?
Click to expand...
Click to collapse
it will show a red text saying your system has been tampered with and turn off..
you will need to restore a completly stock rom with sdcard before you can boot the phone.
I unlocked my mate20 pro, but problem is now i can't relock it , even I use "fastboot oem relock +unlock code"
anybody can help ?
have you tried fastboot oem lock?
you don't have to specify the code
i just tried also and cannot lock
Daniehabazin said:
have you tried fastboot oem lock?
you don't have to specify the code
Click to expand...
Click to collapse
still can't relock..................wait for solution
richard_li said:
still can't relock..................wait for solution
Click to expand...
Click to collapse
Refer to my post here ?
https://forum.xda-developers.com/ma...ocking-bootloader-magisk-root-t3885422/page22
I accidentally relocked the phone by using the hstool method of flashing a full firmware.
it does relock the phone and required me to unlock it again using the fastboot oem unlock code
xeroxide said:
I accidentally relocked the phone by using the hstool method of flashing a full firmware.
it does relock the phone and required me to unlock it again using the fastboot oem unlock code
Click to expand...
Click to collapse
That's interesting. So all your data was wiped when you used the hstool?
Someone else said flashing firmware via dload method also relocks the bootloader.
hmm i'm not sure.
I'll explain the whole situation.
I had just unlocked the bootloader and installed magisk.
after installing magisk, I installed a few modules, one of which made my phone bootloop.
I managed to get back into fastboot mode, use hstool to select my firmware (224) along with the patched hisuite from funkyhuawei.
after my phone recovered, it seems to have been completely reset and locked.
*edit*
I guess I should also add, I've never installed TWRP on this phone, only patched the recovery_ramdis.img for Magisk
xeroxide said:
hmm i'm not sure.
I'll explain the whole situation.
I had just unlocked the bootloader and installed magisk.
after installing magisk, I installed a few modules, one of which made my phone bootloop.
I managed to get back into fastboot mode, use hstool to select my firmware (224) along with the patched hisuite from funkyhuawei.
after my phone recovered, it seems to have been completely reset and locked.
*edit*
I guess I should also add, I've never installed TWRP on this phone, only patched the recovery_ramdis.img for Magisk
Click to expand...
Click to collapse
After locking, can you use the same code to unlock it again ?
EagleEye92 said:
After locking, can you use the same code to unlock it again ?
Click to expand...
Click to collapse
Yes sure
EagleEye92 said:
After locking, can you use the same code to unlock it again ?
Click to expand...
Click to collapse
Yes
ok just an update, while mucking around I accidentally softbricked my phone.
I used the external usb method (where you update using the code *#*#2846579#*#*) and it 100% relock the phone.
*edit*
and yes, the same code works to unlock it again. KEEP THE CODE SAFE!
xeroxide said:
ok just an update, while mucking around I accidentally softbricked my phone.
I used the external usb method (where you update using the code *#*#2846579#*#*) and it 100% relock the phone.
*edit*
and yes, the same code works to unlock it again. KEEP THE CODE SAFE!
Click to expand...
Click to collapse
Can you say me something about the usb method? dont know, what this is. :silly:
ClintP said:
Can you say me something about the usb method? dont know, what this is. :silly:
Click to expand...
Click to collapse
You need an external usb-c drive with some firmware on it.
I initially used v187 from this thread
https://forum.xda-developers.com/mate-20-pro/how-to/firmware-update-187-brings-oem-unlock-t3897301
Since then I downloaded a v206 which works over USB but I cannot recall where I got it from.
Note that you will loose all user data since the phone will be fully wiped.
Also this method requires a phone that is working, as in able to boot and access the dialer and menus.
If I find out where I got the v206 I will post it here as well.
I should also add, maybe it might work with a memory card as well... But this method requires an external source for the firmware since it formats the entire phone
@ xeroxide Thx for your help.
I Try this at the weekend.
If you need to relock your bootloader, this is the process:
Using eRecovery, restore your phone to stock
Once done, boot into recovery and RESET your phone (if you dont, it will not allow you to lock the bootloader)
Boot into fastboot mode (Holding Vol-DOWN, plug in usb cable) , and run the command
fastboot oem relock < bootloader unlock code>
the phone should now ask you that it will wipe your device, confirm,
Enjoy locked phone!
deepsrd said:
If you need to relock your bootloader, this is the process:
Using eRecovery, restore your phone to stock
Once done, boot into recovery and RESET your phone (if you dont, it will not allow you to lock the bootloader)
Boot into fastboot mode (Holding Vol-DOWN, plug in usb cable) , and run the command
fastboot oem relock < bootloader unlock code>
the phone should now ask you that it will wipe your device, confirm,
Enjoy locked phone!
Click to expand...
Click to collapse
Now it works well... i relocked my phone..........but i don't know why i failed last time because i followed exactly the steps...
deepsrd said:
If you need to relock your bootloader, this is the process:
Using eRecovery, restore your phone to stock
Once done, boot into recovery and RESET your phone (if you dont, it will not allow you to lock the bootloader)
Boot into fastboot mode (Holding Vol-DOWN, plug in usb cable) , and run the command
fastboot oem relock < bootloader unlock code>
the phone should now ask you that it will wipe your device, confirm,
Enjoy locked phone!
Click to expand...
Click to collapse
richard_li said:
Now it works well... i relocked my phone..........but i don't know why i failed last time because i followed exactly the steps...
Click to expand...
Click to collapse
it means now relocked and problem solved.........
deepsrd said:
If you need to relock your bootloader, this is the process:
Using eRecovery, restore your phone to stock
Once done, boot into recovery and RESET your phone (if you dont, it will not allow you to lock the bootloader)
Boot into fastboot mode (Holding Vol-DOWN, plug in usb cable) , and run the command
fastboot oem relock < bootloader unlock code>
the phone should now ask you that it will wipe your device, confirm,
Enjoy locked phone!
Click to expand...
Click to collapse
this worked for me thanks loads!
Hi, I'm stuck trying to return my Redmi Note 3 'Kate' to MIUI from cyanogenmod - have searched but this seems to be a niche issue!
A TWRP flash failed and somehow locked my bootloader so my current status is:
- cannot boot, gets stuck on cyanogenmod startup splash screen, so can't flash via MIUI which isn't installed
- cannot flash via MiFlash (locked bootloader)
- cannot unlock via Mi Unlock (account not associated with device and cannot boot to fix)
- cannot flash via XiaomiADB/FastbootTools as bootloader is locked (flash tz error)
- cannot flash via XiaomiADB as apparently my TWRP install is busted, goes straight to black screen and stays there, so I can't get to 'Recovery' mode
So I'm pretty stuck! I can get into Fastboot mode which is something. Maybe I could restore a stock recovery partition via some fastboot tools? but being locked maybe not.
Try unlocking it anyway. I've done it at least 20 times by now without having to login to Mi account on phone.
heineken016 said:
Hi, I'm stuck trying to return my Redmi Note 3 'Kate' to MIUI from cyanogenmod - have searched but this seems to be a niche issue!
A TWRP flash failed and somehow locked my bootloader so my current status is:
- cannot boot, gets stuck on cyanogenmod startup splash screen, so can't flash via MIUI which isn't installed
- cannot flash via MiFlash (locked bootloader)
- cannot unlock via Mi Unlock ( account not associated with device and cannot boot to fix)
- cannot flash via XiaomiADB/FastbootTools as bootloader is locked (flash tz error)
- cannot flash via XiaomiADB as apparently my TWRP install is busted, goes straight to black screen and stays there, so I can't get to 'Recovery' mode
So I'm pretty stuck! I can get into Fastboot mode which is something. Maybe I could restore a stock recovery partition via some fastboot tools? but being locked maybe not.
Click to expand...
Click to collapse
Flash fastboot rom in EDL mode
https://forum.xda-developers.com/redmi-note-3/how-to/guide-reboot-to-edl-mode-fastboot-test-t3398718
n0b0dy666 said:
Try unlocking it anyway. I've done it at least 20 times by now without having to login to Mi account on phone.
Click to expand...
Click to collapse
Have tried lots of times, just get stuck on 'account not associated' error. Thanks for the reply though
Black_Stark said:
Flash fastboot rom in EDL mode
https://forum.xda-developers.com/redmi-note-3/how-to/guide-reboot-to-edl-mode-fastboot-test-t3398718
Click to expand...
Click to collapse
well it has successfully flashed!
you legend, thanks so much for the tip.
Hello folks. I have a Moto G6 Play that i flashed with custom rom and it is now stuck in fastboot.
Before it got to its current state the IMEI and Baseband both vanished. I was told to flash the modem with the NON-HLOS.bin and did without error or effect. I have attempted to flash XT1922-7 the stock firmware but cannot unlock the oem even with the 20 digit code provided by Motorola. The bootloader tells me to toggle Allow OEM Unlocking on in Developers Options only I cant boot up to access Developers Options. Any ideas guys...please, help a moron.
JansenLove said:
Hello folks. I have a Moto G6 Play that i flashed with custom rom and it is now stuck in fastboot.
Before it got to its current state the IMEI and Baseband both vanished. I was told to flash the modem with the NON-HLOS.bin and did without error or effect. I have attempted to flash XT1922-7 the stock firmware but cannot unlock the oem even with the 20 digit code provided by Motorola. The bootloader tells me to toggle Allow OEM Unlocking on in Developers Options only I cant boot up to access Developers Options. Any ideas guys...please, help a moron.
Click to expand...
Click to collapse
What does getvar all say? Remove the imei line before posting.
Code:
fastboot getvar all
If it's saying the bootloader is locked, but you didn't lock it.
Most likely the bootloader(or something) got corrupted and you need to flash a blankflash.
sd_shadow said:
What does getvar all say? Remove the imei line before posting.
Code:
fastboot getvar all
If it's saying the bootloader is locked, but you didn't lock it.
Most likely the bootloader(or something) got corrupted and you need to flash a blankflash.
Click to expand...
Click to collapse
heres the results of fastboot getvar all
JansenLove said:
heres the results of fastboot getvar all
Click to expand...
Click to collapse
There is a blankflash here
https://mirrors.lolinet.com/firmware/moto/jeter/blankflash/
Your device needs to be in EDL Mode to use the blankflash.
Is my device in EDL Mode?
How to boot into EDL Mode
sd_shadow said:
There is a blankflash here
https://mirrors.lolinet.com/firmware/moto/jeter/blankflash/
Your device needs to be in EDL Mode to use the blankflash.
Is my device in EDL Mode?
How to boot into EDL Mode
Click to expand...
Click to collapse
Thank you very much Im about to try it.