Related
Hello,
I have updated my AT&T Dell Streak to 2.1 and now I am in need of the original stock bootanimation.zip file. Can someone with a Dell Streak, with build 6601, run this command:
Code:
adb pull /system/media/bootanimation.zip ./
and post it to this forum or provide a link?
I will use this to replace the 2.1 boot animation (O2). Thanks in advance!!!
Last but not least, does anyone know how to remove the default RSS Widgets? Thanks again!!
More info on how to use the adb command:
http://forum.xda-developers.com/showthread.php?t=502010
http://www.youtube.com/watch?v=1UF5w1dKe2U
http://www.youtube.com/watch?v=A1SOSXwkc_8
If you can give me a little more detail and a step by step on how to exactly do this, I will do it for you.
Is everything still working ok with the Root you did last night? I am thinking of doing this tonight.
Everything is Fine!!!
Hey @mjaverto, thanks for willing to help! And yes, everything is fine; root worked perfectly!! It is what allowed me to update to 2.1 :-D
As a matter of fact I have modified my 2.1 ROM quite a bit:
- Removed O2 boot animation
- Disabled the black popup window that replaced the standard menu bar. I am back to using the 2.1 grey menubar
- Removed/disabled bloatware:
Twitter
Facebook
Getting started guide
Outlook task and notes
RSS Widgets
AmazonMP3 (Replaced with US Version from my Nexus One)
Also modify the build prop to boot US Locale by default and other minor changes. Now all that's left is to change H symbol to 3G symbol and add stock US bootaninmation.zip. That's where you come in. LOL!
Anyways, I am not sure how familiar you are with the Android SDK, but it comes with a tool called "adb." This tool allows you to do all sorts of debugging. It also give you the ability to push and pull files from the Android device's file system.
What I need someone to do is install/download adb and the command from my earlier post. If its done correctly, you will be able to pull files from the Streak's filesystem.
The file I need is:
bootanimation.zip (adb pull /system/media/bootanimation.zip)
I am not sure what OS you use, but here is some more info on adb (Windows specific): http://www.youtube.com/watch?v=1UF5w1dKe2U
http://www.youtube.com/watch?v=A1SOSXwkc_8
Not super familiar but I think I can do this for you. I'm guessing I will need the root done first to be able to use "adb"? Maybe you can share your 2.1 Rom with me after you change these last few things as I'd love to upgrade.
*Windows 7 64x by the way. Should that work ok?
If I have any questions I'll shoot you a PM.
Actually...
No, root isn't necessary. You will only be pulling (copying) files from the filesystem; root is only needed when you want to write to the filesystem and run root system apps.
...And there is one problem with sharing my ROM... I have no idea how to package it. Dell uses, as far as I can tell, a proprietary ROM package (.pkg) format. The best I could do is walk you through the process of getting 2.1 installed. I am basically modifying the ROM on the device.
Hopefully, someone will develop some neat way to backup, modify, and package ROMs for easy installation. Heck, a way may exist... Maybe someone could chime in and enlighten me.
I am not sure about Windows 7, I run Linux. My guess is that you shouldn't have any problems. PM me if you have any more questions or concerns.
***Edit: Is that path you have above correct for sure? I keep getting remote object does not exist.
Upload: I attached tools.zip. *Note the two files inside are the only two files I could find named BootAnimation on my phone which is stock 1.6 ATT US.
Please let me know if I can help with anything else.
Try this...
Try this:
Code:
adb shell ls /system/
and post the output
I posted two "BootAnimation" files I found above
See output:
Cool!
Now type:
Code:
adb shell ls /system/media/
Let see what this produces. Hopefully we will see the file:
Code:
bootanimation.zip
listed.
Nope
Nope sorry. I did a search of the whole device with Astro File manager and it searched all these folders. The above two are the only ones with boot animation.
A search for "boot" yielded these 4. There is no bootanimation.zip:
system/bin/reboot/
system/bin/bootanimation/ (attached in above post)
system/customization/BootAnimation/BootAnimation.xml (attached in above post)
system/bootpriority.xml
sorry.
Private msg...
@mjaverto, check your private messages...
Here ya go mate
I zipped up the bootanimation folder for you from my US Dell Streak Build 6601
Enjoy!
mistadman said:
Hello,
I have updated my AT&T Dell Streak to 2.1 and now I am in need of the original stock bootanimation.zip file. Can someone with a Dell Streak, with build 6601, run this command:
Code:
adb pull /system/media/bootanimation.zip ./
and post it to this forum or provide a link?
I will use this to replace the 2.1 boot animation (O2). Thanks in advance!!!
Last but not least, does anyone know how to remove the default RSS Widgets? Thanks again!!
More info on how to use the adb command:
http://forum.xda-developers.com/showthread.php?t=502010
http://www.youtube.com/watch?v=1UF5w1dKe2U
http://www.youtube.com/watch?v=A1SOSXwkc_8
Click to expand...
Click to collapse
What steps did you take to update to 2.1?
Which steps did you take to update the 2.1 rom?
I was alble to flash the clockwork recovery rom but could not boot it when the device rebooted...
mistadman said:
No, root isn't necessary. You will only be pulling (copying) files from the filesystem; root is only needed when you want to write to the filesystem and run root system apps.
...And there is one problem with sharing my ROM... I have no idea how to package it. Dell uses, as far as I can tell, a proprietary ROM package (.pkg) format. The best I could do is walk you through the process of getting 2.1 installed. I am basically modifying the ROM on the device.
Hopefully, someone will develop some neat way to backup, modify, and package ROMs for easy installation. Heck, a way may exist... Maybe someone could chime in and enlighten me.
I am not sure about Windows 7, I run Linux. My guess is that you shouldn't have any problems. PM me if you have any more questions or concerns.
Click to expand...
Click to collapse
You Are Man!! Thanks!
Thanks! You even grabbed the images! Awesome!!
Anyways, looks like you missed a step with getting 2.1. You need to install the stock UK recovery image: http://www.romraid.com/paul/streak/recovery.stock.img
This will get your recovery image to accept UK ROMS. From here, you should be able to flash 2.1 directly.
See @Greenarcher707's excellent post (http://forum.xda-developers.com/showpost.php?p=7668927&postcount=6) on this forum for detailed guide. Since you have already installed the clockwork recovery image, you should be able to skip steps 1 and 2.
Once you have downloaded the image: (update-6941-21.pkg | http://www.mediafire.com/?bb9cvm5uaap2z8k), save it to the root of your SD as "Update.pkg."
The last step will be rebooting the phone into the recovery mode by holding "volume up" + "volume down" simultaneous and pressing the power key. From here it should be self explanatory.
Good luck and let me know how it goes. Hit me up if you have any more questions and thanks again for your help!!!
US Stock ROM Build 6601?
Awesome!! well I see you have to flash the UK stock rom which has a lower build than ours...Is there anywhere you can download the stock US Rom Build 6601 in case we want to go back to stock? Since the nandroid backup is not working in clockwork..I cannot do a a rom backup
mistadman said:
Thanks! You even grabbed the images! Awesome!!
Anyways, looks like you missed a step with getting 2.1. You need to install the stock UK recovery image: http://www.romraid.com/paul/streak/recovery.stock.img
This will get your recovery image to accept UK ROMS. From here, you should be able to flash 2.1 directly.
See @Greenarcher707's excellent post (http://forum.xda-developers.com/showpost.php?p=7668927&postcount=6) on this forum for detailed guide. Since you have already installed the clockwork recovery image, you should be able to skip steps 1 and 2.
Once you have downloaded the image: (update-6941-21.pkg | http://www.mediafire.com/?bb9cvm5uaap2z8k), save it to the root of your SD as "Update.pkg."
The last step will be rebooting the phone into the recovery mode by holding "volume up" + "volume down" simultaneous and pressing the power key. From here it should be self explanatory.
Good luck and let me know how it goes. Hit me up if you have any more questions and thanks again for your help!!!
Click to expand...
Click to collapse
Unfortunately, I don't know if a stock 6601 ROM exist. I figured that at some point the internets would produce one :-D But for now, those of us that took the plunge are stuck with 2.1 for now.
Thanks cemian!!
FYI...
I just completed the port of the stock boot animation to the 2.1 image. See: http://forum.xda-developers.com/showthread.php?p=7681745#post7681745 for more information.
Thanks again @cemian for your assistance!!
I'm thinking really hard of upgrading to 2.1. but a lil scared but no stranger to flashing.how is this flashing compared to wm flashing.
eastside770 said:
I'm thinking really hard of upgrading to 2.1. but a lil scared but no stranger to flashing.how is this flashing compared to wm flashing.
Click to expand...
Click to collapse
I find it is alot easier than WM once you get the hang of it. I also find that Android phones are harder to brick than WM phone, but not impossible. Just make sure you do plenty of research before you take the plunge. Good luck!!
The multi user and guest account feature is not available on either of the two recent releases of Lollipop for the Z3v. I did some research and it appears this is the case, not only on other Verizon handsets like the Droid Turbo and the Galaxy S5 / S6, but a few other non-VZW devices as well. I'm not sure why it was removed but apparently it's just hidden. It can be enabled and I followed the instructions for doing this for the various other devices and can report that it works for our Z3v (see attached screenshots).
I've kind of cleaned up the instructions and put them below. Usual disclaimer - I'm not responsible for anything that may happen to you or your cat if you choose to do the following. You DO need root access to edit and write to the system file.
** To be safe, please make a backup of your phone and/or a copy of the build.prop file that you are going to edit.
Get ES File Explorer. Run it and enable Root Explorer setting. (You may be able to use any file explorer and editor with root access but this is used most in the instructions and works.)
With ES File Explorer, go to device/system/ and find the file: build.prop
Choose to edit it with ES Note Editor.
Scroll to the end of the file and type in the following:
fw.max_users=5
fw.show_multiuserui=1
Save the file.
I'm not sure if the next step is required but it was in half the instructions I saw, and I did it myself: Click and hold the file, go to Properties, and then change the permissions to Read, Write & Execute. [all three]
Reboot your phone.
When you're up and running, access multi user mode by pulling down your notification shade and then clicking on your user icon at the top right corner.
Notes so far:
A guest user does not have access to the original user's files on the internal drive - the guest user has their own file directory. The guest CAN access the External SD Card, though.
Therefore, an app such as Movie Creator can and will create a "highlight" movie that is composed from photos that are saved on the external SD Card. Just keep this in mind as far as privacy.
There is a per user option that lets you decide whether or not the additional users can use the phone and access the text messages. If you disable this ability, while they cannot open the phone app to make a call, the CAN receive an incoming call.
You can find out more about the nuances of additional users with your Google Fu.
Enjoy!
Wow! Great work!
AddictedToGlass said:
Wow! Great work!
Click to expand...
Click to collapse
Thanks! I really wanted this feature and it seemed like not many people care too much about it. It's my way of circumventing the awful permissions control we currently have in Android. That is, there are apps I want to use but refuse to install because of their overreaching permission requirements (contacts, etc) and so I can now create a second user with a new "dummy" Gmail account that has no sensitive information and install these apps without worrying.
By the way, something neat I figured out about this. Additional user accounts are not allowed to side load apps (the toggle to install from unknown sources is grayed out). I figured out that if the main user / owner restores an app through Titanium Backup, any other currently existing user will have it installed for some reason. I don't know why this happens but it's a neat glitch that gets you around that restriction.
Well I think most people simply don't let others touch their phones and so don't have a use for multiple user accounts. I find that my phone, as big as the screen is, is becoming more and more of a computer / tablet replacement. I like the idea of a multiuser functionality, but mostly to hide my own stuff. I'll silk never let anyone else touch my phone!
The use for multi-user that I've seen that makes the most sense is people with children. They will create a user profile for the child so they can't get into any of the parent's stuff or settings. That or the guest profile which will let them do whatever the heck they want without screwing up the phone.
Aside from that I have read that devs find the feature very useful for testing. Heck, that's not a bad idea to install and test apps, in general.
uh oh.
Well something didnt work. Maybe a certain build I have to be on or what. I followed the instructions to a t. Now stuck on endless boot loop. Only bad part is I'm on as hotel room working out of town without a laptop Or pc to fix it. I used a one click root just today and didn't install a proper recovery. Any thoughts
rpelljr said:
Well something didnt work. Maybe a certain build I have to be on or what. I followed the instructions to a t. Now stuck on endless boot loop. Only bad part is I'm on as hotel room working out of town without a laptop Or pc to fix it. I used a one click root just today and didn't install a proper recovery. Any thoughts
Click to expand...
Click to collapse
I had a problem with this also twice cause I'm always doing stupid things to my phone my guess is you didn't change the system to r/w but modified it anyway or you used a editor that would let you input the correct values I used s manager I think. As far as getting your phone working you could try safe mode or maybe a factory reset if you can hold power and the volume button down and enter recovery.
Tigerhoods said:
I had a problem with this also twice cause I'm always doing stupid things to my phone my guess is you didn't change the system to r/w but modified it anyway or you used a editor that would let you input the correct values I used s manager I think. As far as getting your phone working you could try safe mode or maybe a factory reset if you can hold power and the volume button down and enter recovery.
Click to expand...
Click to collapse
I believe the mistake was made when i changed the permissions per instructions. I finially got to my house and im using adb to freeze the loop then going to push a script over to fix the permissions. I will update when i get it done and I will post my fix. Also I used ES file explorer, which i have already used it for years now. Never had anything like this happen before. it just baffles me. I have never got any instructions off of XDA that led to any malfuntion of my phone. But oh well, sh!+ happens.
rpelljr said:
I believe the mistake was made when i changed the permissions per instructions. I finially got to my house and im using adb to freeze the loop then going to push a script over to fix the permissions. I will update when i get it done and I will post my fix. Also I used ES file explorer, which i have already used it for years now. Never had anything like this happen before. it just baffles me. I have never got any instructions off of XDA that led to any malfuntion of my phone. But oh well, sh!+ happens.
Click to expand...
Click to collapse
Hey! I'm so sorry! I got a couple of new phones (Droid Maxx 2 and LG G4) and have been using those phones so I haven't been checking these forums like I was when I just had the Z3v. Really sorry to hear that you ran into that kind of trouble . Thing is, the instructions above are culled from 4 or 5 different sets of instructions for various devices that I found across the web. I performed them step by step myself while cross referencing them to each other and combined them all to the instruction set above as I did it. Did you ever fix it with the method you mentioned? I'm curious if it was the permissions thing (odd, because it worked for me).
Jurassic Pork Fried Rice said:
Hey! I'm so sorry! I got a couple of new phones (Droid Maxx 2 and LG G4) and have been using those phones so I haven't been checking these forums like I was when I just had the Z3v. Really sorry to hear that you ran into that kind of trouble . Thing is, the instructions above are culled from 4 or 5 different sets of instructions for various devices that I found across the web. I performed them step by step myself while cross referencing them to each other and combined them all to the instruction set above as I did it. Did you ever fix it with the method you mentioned? I'm curious if it was the permissions thing (odd, because it worked for me).
Click to expand...
Click to collapse
it is guys if done right your system needs to be switched to r/w then go back to r/o after modifying the build prop if you modify in r/o you will get bootloop to a hard brick it depends.
Jurassic Pork Fried Rice said:
Hey! I'm so sorry! I got a couple of new phones (Droid Maxx 2 and LG G4) and have been using those phones so I haven't been checking these forums like I was when I just had the Z3v. Really sorry to hear that you ran into that kind of trouble . Thing is, the instructions above are culled from 4 or 5 different sets of instructions for various devices that I found across the web. I performed them step by step myself while cross referencing them to each other and combined them all to the instruction set above as I did it. Did you ever fix it with the method you mentioned? I'm curious if it was the permissions thing (odd, because it worked for me).
Click to expand...
Click to collapse
Well I kinda fixed it. I went and bought a HTC M9. Lol but not yet, I'm still working on it. I have found scripts to run, even a specific build.prop fix to push, but I have windows 10 and couldn't get adb to find the device. Plus I'm a little rusty. So I broke out my old windows 7 laptop I have used just for rooting an modding phones and tablets. I did get adb and fastboot to find it once. Then some reason lost it. I didn't have it ready to go. But I'm almost 100 percent sure I can get it. Just need to play around with it a little bit more. Having trouble with drivers etc. I will let you know when I have it.
And didn't really hurt my feelings getting the phone I truly want. I never had problems with HTC since I was flashing roms on my old window phones. I just want my pictures I cannot replace.
"Run it and enable Root Explorer setting. (You may be able to use any file explorer and editor with root access but this is used most in the instructions and works.)"
Alas- I am not rooted, and therefore can not enable "Root Explorer" option. Unless someone has some other suggestions- I think I can't do this unless I'm rooted.
Well this is probably what I did to brick my first z3v.
I don't suggest anyone do this at all. There does seem to be an issue with the permission setting on the build.prop file. If it's not reset correctly after editing, you'll get stuck in a loop or worse. I'm stuck in bootloop, but can get into recovery. I made a backup hoping to learn how to edit the build.prop (delete it and rename the copied original to set it back as it was). But I can't even run the original zip that GigaSPX made up for us. (I don't have a backup like I hought I did.)
Anytime I try to install the flashable prerooted zip it tells me it's done after 2 seconds and says;
set_perm: some changes failed
I'm typing this on my z2 tablet, which has the multi user feature enabled. I'm going to see if RootExplorer will give me some clues as to why this doesn't work.
In the mean time I'm hoping someone can help me out?
If love to get this feature to work, but it has to be safe.
Just checked the build.prop on my tablet and got no clue.
AddictedToGlass said:
Well this is probably what I did to brick my first z3v.
I don't suggest anyone do this at all. There does seem to be an issue with the permission setting on the build.prop file. If it's not reset correctly after editing, you'll get stuck in a loop or worse. I'm stuck in bootloop, but can get into recovery. I made a backup hoping to learn how to edit the build.prop (delete it and rename the copied original to set it back as it was). But I can't even run the original zip that GigaSPX made up for us. (I don't have a backup like I hought I did.)
Anytime I try to install the flashable prerooted zip it tells me it's done after 2 seconds and says;
set_perm: some changes failed
I'm typing this on my z2 tablet, which has the multi user feature enabled. I'm going to see if RootExplorer will give me some clues as to why this doesn't work.
In the mean time I'm hoping someone can help me out?
If love to get this feature to work, but it has to be safe.
Just checked the build.prop on my tablet and got no clue.
Click to expand...
Click to collapse
a backup usually means going into your twrp and hit the back up button and make a copy of your system including data and all that. This is mandatory before messing with the build prop. If you want Pm me your build prop and I will send it back to you. With multi user enabled.
Yup, I know what a back-up is and how to do it, and I know it's a must before messing with the build.prop. I just really thought I had done it recently...
-and I had! But I forgot that a few days ago I bought myself a Christmas present; a 200 Gb micro SD, and copied most of the contents to the new card from my old one. I chose not to copy the backup because I had planned to make some changes and create a more recent backup. Never happened though because I got side tracked loading music and such. Lol!
So I'm all back together, but would still like to play with this feature. So I'm going to give it another shot.
A guest user does not have access to the original user's files on the internal drive - the guest user has their own file directory. The guest CAN access the External SD Card, though.
Click to expand...
Click to collapse
Perhaps the wrong thread but: enabled multi user on a Cube T8 only to find that guest and other user can access INTERNAL sd but not external sd. I'd rather have it the other way round. So the kids (other users) can use the whole of 32 GB sd card rather than me having to share the small internal sd with them.
Any ideas how to fix this? Phablet is not rooted btw.
got bootloop..... but i'm safe as i've backup.... through recovery..
I've inserted two lines and fell in bootloop
Thanks bro.. working....!!!! but second step is not needed...
I've been looking hard for this kind of mod for the Moto X Play all around the web and managed to find a cool 'dedicated' bootanimation for Moto X Play along with matching logo.bin... At least, that's what they say at the site I've found it. Already flashed logo.bin successfully, although bootanimation is a whole different story. First, it is not an mp4 bootanimation; instead, it's the more usual PNG image sort, more popular and commonly found on most other device brands. Since this site states it is for Moto X Play, I just went all the way and installed it as usual (ES file explorer is my choice). Rebooted and the new bootanimation started to play normally for a few seconds, then, well... it got stuck. Even though I have TWRP installed, I wasn't able to find a way to go back to stock, so ended up restoring nandroid backup. Now I'm trying to figure out what happened. My first thought is that the bootanimation is too heavy and long (47MB and more than 800 images!!!) So I'm in the process of making it lighter and shorter as possible. My second thought, is that the new bootanimation has only a part0, no loop. I'm fixing that too (is not the first time I deal with bootanimations). My third thought is that this device boots really fast (faster than any other device I had) and such a pace just conflicts with such a big bootanimation. And my fourth thought is that the device system is simply not compatible with PNG bootanimations. So, before I try my customized-custom bootanimation again: is any of my thoughts right? How I can make a PNG bootanimation to work flawlessly right on the Moto X Play? Since it worked for a few seconds, the answer might possibly and positively be yes, but... how? I will hate to restore again just because a bootanimation... Here's the logo.bin, and unchanged bootanimation in question. In case you want to take a look..
https://www.dropbox.com/sh/5es3rzyisyxrwlh/AAC4DOtolBGeD804z6m7_9mla/bootanimation1080p.zip?dl=0
WARNING - THESE TOOLS WRITE TO THE DEVICE PARTITIONS DIRECTLY
If you don't know what that means...
THIS CAN REALLY SCREW UP YOUR ---
I HAVE ONLY TESTED THESE ON THE A2020U (NON-5G) - I CANNOT SAY THEY ARE SAFE ON ANY OTHER VERSION OF THE PHONE (YET)(If you want to test it on a specific model you own, send a PM or post and I can tell you to run a few (safe) things from these tools to make them compatible your phone.)
See my next post down for some more "beginner friendly" general tips and tricks for this phone, including some fixes for common problems and a quick guide for installing Magisk!
If you can't afford to brick your phone, these tools aren't made for you.
There aren't really any protections from doing damage. I made them for myself because doing them on a command line constantly is a pain. I'm just sharing them for two reasons:
1) So myself or other people have tools available to make it easier when advising someone on how to fix their phone.
2) For tinkerers who are okay taking the risk that they'll mess something up.
Thanks to @djkuz / @Unjustified Dev for the EDL tool. These scripts really just expand the use of fh_loader commands in that tool. If you are able to read C++ and want to understand fh_loader I suggest searching on google, the source code is available and from that you can better understand what the tool does / what the command line options do. Feel free to ask here too, I'll do my best to share what I know.
Anyway - below I'll go into plenty of detail of what each "tool" does and some helpful information about using them.
I write in a kind of permanent verbose mode, so if you're impatient and need a TL;DR for these... tough. =)
CURRENT VERSION: Version 1.1d
Changelog:
Version 1.1d:
- Fixed reset scripts
Version 1.1c:
- Fixed a typo in backup_GPT ¯\_(ツ)_/¯
Version 1.1b:
- Fixed errors in GPT_Tools - apparently these existed since v1.0 DO NOT USE PREVIOUS VERSIONS
- Removed the v1.1a download (use 1.1b)
Version 1.1a:
- Added script to find the COM port automatically
- Updated all scripts to use the COM port in the file COMPort (created by the above script)
- Added the missing AB Partition manipulation files (accidentally left out of v1.0)
- Added script to run the phone reset EDL command
- Fixed all the filename inconsistency in the XML files - HOPEFULLY. Please post any errors you find. Unfortunately this will make this version incompatible with v1.0 backups without some work - either rename your backup files to match the new format or use the old XML files included.
-- Especially fixed the XML typo of "uefi_sec.mbn" being backed up from both A and B to the same file (overwriting the A copy with B during an ALL backup).
- Added support for installing firmware packages created for this tool. Put them in the Firmware_Package_Restore directory and use the scripts included with them.
Basic Instructions:
1) Download zip (See attachment at the bottom, or here - Download from AndroidFileHost)
2) Unpack zip
3) Move folder to the root directory, or inside any chain of directories that do NOT have spaces in any of the names
4) Right-click on scripts and select "Run with Powershell" to run
5) If running scripts fails due to permissions, see these instructions: https://superuser.com/questions/106360/how-to-enable-execution-of-powershell-scripts
Make a "Complete Backup" (minus userdata):
1) Run Load Programmer
2) Run "backup_all"
3) Check the backup directory and verify the files were backed up and sizes make sense - a full backup should be 10,387,202,048 bytes / 39 files for the critical files and 1,626,697,728 bytes / 64 files for the non-critical (Don't include the port_trace log file when checking size)
Note: You will see a lot of "warnings" before the files begin to download, the program checking if the files already exist.
How to Use These Tools:
Important:
When the scripts run there will be a lot of information dumped to the console. It's not necessary to read all of that BUT - IF YOU DO NOT SEE THE ASCII ART "DONE" AT THE END of running any of these scripts it is likely the script encountered a serious issue. "WARNING" art is normal for some scripts, but "ERROR" means something went wrong.
None of these find the COM port automatically. It is possible (the EDL tool does) but it's just extra work I'm not paid to do =P
You will need to edit each program and change the variable at the top (usually $COMPort = "6") to whatever port number your phone shows up on.
Sorry that's inconvenient, but it should just be once per script - my port number never changes so it wasn't worth implementing automatic port finding.
This is no longer needed after v1.1a.
1. Load Programmer
This is a simple but extremely important tool! You need to run this before running anything else. This script will open a window that runs a command to open a connection to the phone (when it is in EDL / "9008" mode). The window will stay open until you close it. When working on backups I often need to re-connect the programmer, so this makes that easy - just alt-tab to it and hit enter. If you look at the script, it's fairly straightforward - just read the instructions on the screen after running it. The "secret sauce" for this is really the firehose protocol for our chipset that Unjustified Dev provided in the EDL tool.
2. Backup / Restore:
backup_all: This will backup everything on the phone EXCEPT for the huge userdata partition. It will create a backup in two directories, which I'll explain.."critical" / "non-critical": You can see that I have scripts to run these two "types" of backups. Non-critical DOES NOT MEAN NOT IMPORTANT. It means that it is not critical TO ME to back up those files EVERY time I do a backup, because they rarely change. They're EXTREMELY important to have at least one backup of for your phone. The "critical" backup files are files that change often, although some of them are extreme non-critical (cache for example). Use a different name than "critical" if you like, but the point is that only with BOTH backups run (which is what backup_all does) will you have a complete backup.restore_all: This will restore a full (both critical and non-critical) backup set. The backup files have to be in the "restore_critical" and "restore_non-critical" directories respectively. If you didn't make the backup you're trying to restore with this tool CHECK THE FILENAMES, e.g. if you used Unjustified's EDL tool you have to rename the "abl.elf" file his backup generates to "abl_a.elf" for mine. I put _a and _b on every partition that has an a/b version because I got tired of getting them confused. Of course you can always install a backup to either slot.Files moved to the "restore_" directories won't be changed at all by the restore process so you can cut/paste the files from your backup into the directory instead of copying them.
3. A/B Partition Manipulation
These are no more complicated than the backup/restore tools. But they are written to make manipulations of the A/B partitions easier.My main use for these is when I know I have a good, working ROM setup on slot A, I run A2B copy. Then no matter which slot I end up booting I'm sure it will work. (That is, if you have a working, booting slot, copying all the files from that slot to the other slot using this tool will make both slots the same.)Backup/Copy:run_AB-partition-backup: As it says, it will backup both the A/B partition files - WARNING this is NOT a full backup of the phone.run_AB-partition-swap: This will backup all the A/B partition files, then it will write the B files to A and A to B, effectively swapping the partitions and leaving you with a backup in case it screwed up. This backup is ONLY OF THE A/B FILES.. NOT the whole device!run_A2B-partition-copy (and run_B2A-partition-copy): These will do a backup of both A/B partition files, then write the A partition onto the B partition (A2B) or vice versa (B2A), effectively mirroring that partition.
Write/Restore:All the restore scripts try to find their files in the "restore_Partitions" directory - place the files from one of the backups to be restored there.restore_AB-partition-backup: Restore a backup of both the A and B partition files.restore_A-partition-backup (and B): Restore just the backup of one partition to the same partition it was taken from (A to A and B to B).restore_A2B-partition-backup (and B2A): These write from one partition backup to the other partition as the name suggests.
4. GPT Tools
These are some basic tools to directly interact with the partition tables - these are not going to be of any use to 99% of people, so just ignore them if you don't know what they do.run_fixGPT: This issues the --fixgpt command to each of the LUNs. USE AT YOUR OWN RISK. As I understand it, this will use the onboard device configuration information from each LUN (e.g. logical size) and try to rebuild the GPTs. It's similar to running patch XMLs, it can clean up flashing messes. It isn't magic and won't fix everything.Rarely will anyone need it unless they've been messing around with the flash tools recklessly... I certainly don't know anyone who would do something that dumb backup_GPT: Backup all of the header and footer (main/backup) GPTs for all the partitions (lun 0-5). I am not aware of whether any other models of the phone have more LUNs, so be careful if you're using this on a non A2020U phone.restore_GPT: Simply write an entire GPT backup set (both main and backup 0-5) onto the phone. The backups must be in the restore_GPT folder. This DOES NOT BACKUP before it runs so make sure you did your backup.
6. Set Bootable Partition:
Alright this one is important for everyone. There are two scripts here - one for slot A and one for slot B. These just run a simple command, but they will fix a common problem I (and probably others) have - when the ROM active-slot information does NOT match the partition (hard drive) bootable flag, the phone will bootloop EVEN THOUGH EVERYTHING IS GOOD.So when you flash an EDL backup (depending on which files you flash, I believe this happens because of either the bootloader or the GPT files) there is a chance the backup you're flashing was originally from a different slot than the one you're restoring it to. The config thinks it should be on slot A while the hardware thinks slot B should be booting.This will result in a fast ~3 second bootloop as the two disagree and reset.This tool changes which partition is expecting to boot - "1" for slot A and "2" for slot B.This does NOT change the active slot - the phone will continue to boot the same slot it's trying to boot. You just need to make the partition that it is trying to boot has a bootable flag.AFAIK there is no way to change the active slot (the one XBL (I think) is trying to boot), except through fastboot or when the phone fails to load the OS 8 times in a row (note - if it fail to load the OS - if the phone bootloops before "boot" is called it won't ever switch slots on its own).This was a common cause of fast bootloops for me before I figured this fix out.
It does no harm to try this as you can always switch again. If neither one works for you, then it's something wrong with the files you're flashing. If you know which slot the phone is trying to boot (the one it was on last), run the script that matches that slot.
7. Write "Unlocked" Bootloader and FRP:
Just like the original EDL tool, these very simply overwrite your existing (probably stock) bootloader (abl) files with the fastboot enabled version, and/or your FRP with the "unlocked" flag on (see description below). This will allow you to enter the bootloader menu (Vol+/- on booting) and use fastboot to unlock the bootloader.backup_FRP-and-bootloaders: As it says, this will make backups of both the FRP file and current bootloader files (ABLs).run_all: Literally just runs both of the below scripts *shrug*write_UD-bootloader: This automatically backs up both your existing A/B bootloaders before overwriting them (BOTH) with the unlocked/fastboot bootloader.WARNING - an unfortunate fact is that if you're using the stock ROM and you have this bootloader installed, it borks the USB mode so it's stuck in charge only. There's a way to fix it temporarily, I'll post it in my "tips" thread, but you have to do it every time you boot, very annoying. I can't fix it permanently because I don't know how the bootloader file was built!WARNING 2 - Android 10 will NOT BOOT with this bootloader installed. You can still install it, trying to boot will bootloop, but you can get into the bootloader menu and use fastboot - but there are no recoveries I know of that work with Android 10 right now, so there's very limited use to having fastboot right now. Hopefully we can get a port of TWRP 3.4 going for this phone..write_unlock-frp: This is also in the EDL tool, but maybe poorly explained - the FRP file holds the flag you change in the OS Developer Options to designate "allow bootloader unlock". If you FORGOT to switch that flag on and unlock, as I understand it, you get bootlooped. This can fix that for you without having to go through all the work of undoing that mess.WARNING - I have only tested this with a brand new factory reset OS WITHOUT any fingerprint/code set. It may not work if you set one. I warn against using this if you are not ready to lose your data. It's convenient if you just forgot, but if you set a pattern/fingerprint security and encrypted the filesystem overwriting the FRP might remove your ability to decrypt which would force you to factory reset. Again, I haven't tested it for that so it may work, but be careful.If you already screwed up and ran this to set the flag - the script runs a quick backup of your old FRP just in case. So you can try to restore that FRP and pray lol)
8. Specific Files:
This is just a generic program to backup/write(restore) "specific files".I include a "Reference.XML" which has a full <program> line for every partition you might want to write/read on the phone. To use this, you need to copy the lines from the reference XML into "rawprogram-specific-files.xml" for the files you want to read/write.As an example I already set up "rawprogram-specific-files.xml" with the two lines for "abl_a" and "abl_b" in it. So the script will backup or restore those files (provided you put the abl's you want to restore in the restore_files directory).I personally use this template a lot - I have one for ABLs, one for AOPs, one for BOOTs, and so on. If you are trying to fix a specific file(s) it's convenient.
9. Userdata Backup:
I put this last because, to be honest, I'm not sure how good of an idea including this even is.VERY IMPORTANT - DO NOT USE THIS USERDATA TOOL IF YOUR PHONE IS NOT THE 256GB VERSION!!!!!I will need someone with the 128GB version to send me their GPT files if they want me to make an XML that works for them. Because the userdata size for SURE depends on your phone version.Also, I wrote a script that breaks up the file into download slices (and can be written back to the phone in slices, of course) - one, to see if I could do it and if it would work (it does)... and two, so that in the horrible case that something goes wrong during the... nearly 2hrs of transfer time, for my 256gb image ... that I can at least not have to start all over. If something happens, you should be able to remove the entries in the XML for what you already have and start again.Finally - is it even worth doing? Is backing up the userdata even useful?I don't know yet.For an unecrypted pre-A10 phone I do know it works to fully flash ALL the files on the phone + the userdata all at the same time to return the phone to the exact "state" it was backed up in - all the apps and settings and everything, exactly as they were.But A10 is encryption enabled always, and it uses file encryption which sounds even worse for this idea.. and I don't know if the crypto keys change and when. So flashing an entire encrypted partition might just leave you unable to decrypt all, some, or none and you lose everything.OR it might just work - you throw the whole image on there and the decrypt key is the same, boom, easy backup.If anyone tries it, let me know how it goes (or doesn't). I'll update with any results I find.Update 1: I have confirmed that for the 256gb A2020U backing up the full phone and userdata allows you to restore the phone to that exact state. Doesn't matter if it's encrypted, password set or not, etc. If you backup the entire userdata image and reflash it that is where the phone will be. In most cases you also need all the other partitions too, but if they have not changed they don't have to be reflashed. (I confirmed going from encrypted with password -> encrypted with no password -> back up encrypted with password.. This is on Android 10 with its more complicated encryption).Another nice thing to note - of course the image of the phone will be the size of the partition (ie. 256gb for mine, 128gb for others). But if your phone storage is largely empty, you compress the backup using something like 7z once the image has been backed up. It won't take up so much space then. How much less? My 256gb image compressed is 4.5gb. lol.... it makes sense, the phone is new and there's basically no information on the userdata. Many of the pieces of my userdata backup have the same exacty hashes - meaning they are literally just all 0's... 260gb of zeros. Unfortunately you can't get away with just backing up part of the image as data could be anywhere. And over time as the sectors get written to, it will get more difficult to compress.Anyway, if anyone has a 128GB version they want to donate to science (kidding - I just need backups of the GPT) I can make the XML file to use for backing those up too.
Extra Note: All the programs automatically build a log of the console window, so if something goes by too fast just check the log. The fh_loader also creates a log and dumps it somewhat randomly about... lol.. the filename is port_trace.txt. This tends to get deleted and overwritten easily so if you want to keep it, move it when the script finishes,. it does often contain more information than the console shows - it can be useful understanding what's going on.
Extra Note 2: You'll notice a script "Create Hash List" in practically every directory. That's to strongly hint that using that script is super useful. All the files backed up through these tools, by definition, have the exact same size. If you hash your files though, you can tell if they have changed at all. This is extremely useful in troubleshooting problems.
How to install an EDL firmware package:
Note: This tool is specifically made for the firmware packages I posted. It won't work with any other package (although it can, with a little work).
1. Install the EDL tools
2. Run a backup of your phone! Even if it isn't booting.
3. Download a firmware package from this thread: [ROM][STOCK] Stock Firmware Packages (For Expanded EDL Tools)
4. Unpack the firmware archive into the tool directory "Firmware_Package_Restore"
5. Put phone in EDL mode and run Load Programmer
6. Run whichever "Write Firmware vX to Y.ps1" you want (X = firmware version, Y = A or B partition) (If you don't know which partition is currently booting, just install both.)
7. Wait for the install to finish ("done"), then reset the phone with either the power button or the reset tool
8. You might see a few bootloops and then the phone ask you to do a factory reset / system wipe.
9. Done.
PLEASE POST IN THE FIRMWARE THREAD _NOT HERE_ IF YOU RUN INTO ANY ISSUES!
Enjoy!
Also, while I'm here... some other helpful notes for this phone:
-------------------------------
General Information:
As of right now there are a lot of working options for Android 9 and quickly expanding thanks to work @Unjustified Dev did and work @rafyvitto is continuing to do! Check out some of his sGSI ROMs, lots of options!
Thanks to Unjustified LOS 16 is available for Android 9 also, and is the base install for most ROMs. See his threads for that. I may write up an install guide here that's a little more in depth than his.. not today though.
Upgrading to Android 10 with the bootloader unlocked is possible but requires a workaround:
You must unlock on Android 9 then use recovery to side-load the Android 10 update available from ZTE USA (HERE).
This will remove the fastboot enabled bootloader and requires a complete system wipe.
You will retain bootloader unlock.
Once you have updated to A10 you can run OTA updates to get up to the latest version.
Downsides to A10 include - NO RECOVERY (yet), NO CUSTOM ROMs (yet), and if you flash the fastboot enabled bootloader you CAN use fastboot, but you cannot boot- the phone will be in a bootloop until you restore the stock A10 bootloader.
-------------------------------
Resetting the phone manually:
In EDL Loop - Hold power for 20 seconds
In EDL Not-Looped - Hold power for 5 seconds
In System (booted after ZTE logo) - Hold power for 10 seconds
----------------------------------
Entering Modes:
All of these start by using reset above, THEN the button(s) below - in all except one case (EDL), when the phone resets it will vibrate and then show the blue ZTE logo.
When you feel the vibration you want to immediately release the power button and press the mode buttons.
This can be confusing and tricky - most people say "hold power + button" - that is incorrect. Most cases if you hold any button other than power the phone will not finish resetting until you release that button.
What you want to do is right before or as the phone vibrates, then you hold the button. Once the ZTE screen is up it is probably too late if you missed it. So hold power for your reset and be ready to push the button you want when you feel the vibration.
The one exception - EDL mode. For EDL mode you can (and must) hold the key combo just before/during the restart.
Recovery Mode: Vol+ Button
Factory Test Mode: Vol- Button
Bootloader/Fastboot Mode: Vol+/- Button (both) when phone is NOT plugged into USB (if you are too early pressing the combo, even with the USB unplugged, you will get EDL mode)
Emergency Download Mode: Vol+/- Button (both) when phone IS plugged into USB
--------------------------------
EDL Flash Errors (esp. when EDL looped):
There is NO indication the phone is even ON when you are EDL stuck/looped. Other than when you plug into the computer with the right drivers it shows up as a 9008 device (9008 mode is EDL for Qualcomm).
Even when you can see the phone on your computer, it can often "freeze" in EDL if it is left idle for too long (not connected to and being used by a Sahara programmer).
If you try the EDL tool or another flash tool and they give you errors related to the Sahara programmer not loading or no "hello", do this:
Reset the phone - use a clock to count if you need, has to be accurate since there's no indication of when it resets. Press down Vol+/- and the power button, count to 20sec, then release JUST the power button. Keep holding both of the volumes for another 5 sec, then release them. That will get you back into a fresh EDL. You can watch your Device Manager to see the phone disconnect as an indicator when to let go of the power button. If you mess up the timing, wait a bit before trying again so the phone isn't in the middle of rebooting.
Easiest way to tell if you're in EDL is to watch the Device Manager while you do it. Otherwise there is just a lot of guess work, since there's no logo or vibration when you get it right, phone just appears off.
--------------------------------
USB Mode Stuck After Unlocking:
Something about the fastboot/"unlocked" bootloader causes the USB mode when you boot in the OS to be stuck on "Charge Only" mode.
Luckily I found @meow sir 's comment tucked away in this thread, and he knew a way to fix it (thanks!):
1. Open the phone dialer
2. Dial in "*#*#DEBUG#*#*" (debug = 33284)
(Sometimes takes a little bit to open, but a debugger menu will open)
3. Select the 2nd option for USB
4. Pick the only option - this will unset some strange "testing" mode and you can use MPT again.
Unfortunately this fix doesn't stick, you have to do it every time unless you switch back to the stock ABL. =(
--------------------------------
Installing Magisk, Quick Guide:
- You must have your bootloader unlocked already! This works on both A9 and A10.
1. Use this tool to create a full backup! (backup_all)
2. Go into the "critical" directory created by the backup and find the files for boot_a.img and boot_b.img - rename them to boot_a_bak.img and boot_b_bak.img and keep that window open, need them in a second
2. Boot into the OS. Download the Magisk Manager APK from HERE
3. Copy the APK and both of those boot files to your phone, open a file manager and install the APK
4. Open Magisk Manager and click on "Install" for Magisk (upper right)
5. Select "Patch Boot ROM" (or whatever it says.. something like that..)
6. Navigate to boot_a_bak.img and patch it.
7. Go to your Downloads directory (where Magisk dumps the patched file) and rename it to boot_a_magisk
8. Go back to Magisk and repeat those steps for boot_b
9. Copy the two patched Magisk boot files to your computer, into the folder with your "critical" files backup.
10. Rename the Magisk files to "boot_a.img" and "boot_b.img"
11. Move all the files from the "Backup\backup_all-critical-(...)" directory to the "Restore\restore_critical" directory in my tools
12. Finally, reboot into EDL.. almost there!
13. Run "restore_all-critical" (don't forget to run Load Programmer first..)
14. It will restore all you files, kinda a waste of time - if you know how to use the "Specific Files" tool this is a perfect time to use it to flash JUST the boot files. But anyway - this will get it done.
15. When done flashing, reboot the phone and open Magisk Manager to confirm it is installed!
The Magisk team recommend you DO NOT FLASH your stock boot files back to uninstall it, instead they say you should run their uninstaller.zip. However, I am not sure how to uninstall it if you're on A10 since we don't have a recovery that can flash zips? (Unless the stock recovery works for that, I don't think it would..)
I suspect (but have not tried) that on our phone flashing the boot files back over Magisk will not really be a problem since the recovery and ramdisk are all wrapped up into the boot image. But I don't recommend trying it if you value your data! Fair warning.
---------------------------
Alright that's everything. Good luck!
This will be useful for a lot of folks on here, thanks for taking the time to look for a work around.
rafyvitto said:
This will be useful for a lot of folks on here, thanks for taking the time to look for a work around.
Click to expand...
Click to collapse
Glad to be helpful! Usually I lurk the forums getting information I need to unlock/root/etc lol.. but I saw I actually could contribute something to this forum so hopefully it encourages people to get interested in this phone. It's looking pretty sweet now that I'm not spending days fighting with bootloops!
Indeed,on the note of attracting more users. im going to be releasing something for the pixel lovers very soon ?
Thanks Bob!
I'm on A10 with unlocked bootloader. I made all EDL tool backups when on A9 but these were done before correcting the typos as suggested. So I am not confident of successfully flashing back to A9 (preference).
Therefore I will likely flash the magisk-patched boot files to attempt root and report my experience...
Sent from my ZTE A2020U Pro using Tapatalk
big thx, glad to see some life to this almost dev-dead device
Hey thanks for the post. I'm thinking about buying the phone but have a quick question. Can I update to the latest version of Android 9 before unlocking or will the OTA be Android 10. How would I go about updating to the latest version version of Android 9 and not go to Android 10. Can I download the Android 9 OTA from somewhere and flash that one? Thanks in advance for the help!
Crackass said:
Hey thanks for the post. I'm thinking about buying the phone but have a quick question. Can I update to the latest version of Android 9 before unlocking or will the OTA be Android 10. How would I go about updating to the latest version version of Android 9 and not go to Android 10. Can I download the Android 9 OTA from somewhere and flash that one? Thanks in advance for the help!
Click to expand...
Click to collapse
:good: I think your question borderlines on needing its own thread in the Q&A section but I'll answer you anyway...
Currently as long as you are on A9 when you get the phone you can just do OTA updates from firmware version 1.10 to 1.11 to 1.13 (not sure what android security update that is), after 1.13 it goes to A10.
There is an A10 firmware available from ZTE to SD card sideload. Once installed it has to be updated to the latest A10 via a couple OTA updates.
Going directly from A9 to A10 via OTA goes directly to the latest version.
You cannot flash the A9 OTA... because flashing an OTA is an oxymoron... but I guess you mean can you download the A9 firmware and flash them. The answer is... maybe. ZTE does not offer official downloads any A9 firmware for A2002U (USA version), only A10.
They do offer A9 firmware for A2020G (european) and I think other foreign versions (RU, CN). These cannot be interchanged, if you have the US or EU or CN phone you need to use that firmware... from what I have read. I could be wrong, I don't have those phones.
But there is an unofficial stock A9 firmware for the A2020U here on the forums, uploaded by @rafyvitto . That will get you to.. I forget.. 1.11? That can be flashed using the original EDL tool or, with a little modification, the EDL tools in this thread.
Additionally.. if I ever get around to it... I plan to upload all three A9 firmware packages for the US version which can be flashed with the EDL tools in this thread. Not sure if it's really necessary, but I have them.. it's just a matter of figuring out hosting them and spending the time to upload them.
bobthenormal said:
:good: I think your question borderlines on needing its own thread in the Q&A section but I'll answer you anyway...
Currently as long as you are on A9 when you get the phone you can just do OTA updates from firmware version 1.10 to 1.11 to 1.13 (not sure what android security update that is), after 1.13 it goes to A10.
There is an A10 firmware available from ZTE to SD card sideload. Once installed it has to be updated to the latest A10 via a couple OTA updates.
Going directly from A9 to A10 via OTA goes directly to the latest version.
You cannot flash the A9 OTA... because flashing an OTA is an oxymoron... but I guess you mean can you download the A9 firmware and flash them. The answer is... maybe. ZTE does not offer official downloads any A9 firmware for A2002U (USA version), only A10.
They do offer A9 firmware for A2020G (european) and I think other foreign versions (RU, CN). These cannot be interchanged, if you have the US or EU or CN phone you need to use that firmware... from what I have read. I could be wrong, I don't have those phones.
But there is an unofficial stock A9 firmware for the A2020U here on the forums, uploaded by @rafyvitto . That will get you to.. I forget.. 1.11? That can be flashed using the original EDL tool or, with a little modification, the EDL tools in this thread.
Additionally.. if I ever get around to it... I plan to upload all three A9 firmware packages for the US version which can be flashed with the EDL tools in this thread. Not sure if it's really necessary, but I have them.. it's just a matter of figuring out hosting them and spending the time to upload them.
Click to expand...
Click to collapse
Just wanted to chime in, interchanging firmware between each model is possible, you would only need to reflash your model/nonhos/tz partitions to the ones of your variant to have working ril/fod fp/sensors.
Ok Bob I gave it a go and successfully rooted my A2020U running stock A10 v2.09. This is my experience...
Firstly, my A2020U could not connect so I used the @Unjustified Dev Tool ("original tool") to easily determine my com port (i.e. 3). I edited the your scripts accordingly (using Notepad++) and got connected.
I'd rather not fiddle with the hardware buttons to change modes so I used the CLI to "adb reboot edl" to get into EDL mode.
I executed the backup_all.ps1 script.
It echoed several "warnings" indicating that it could not find files. However, the created backup folders did in fact include those files.
I noted that none of the "A" slot files include the "_a" postfix; the "B" slot files did include "_b".
Now I needed to transfer those boot files to my device by first rebooting my device and connecting via MTP.
I noted that the original tool offered a reboot menu option (but sadly only after executing a successful operation). So, not wanting to fiddle, I used the original tool to backup my boot files, then used the menu option to reboot; On my device I then manually selected it to connect via MTP.
After transferring the "boot.img" and "boot_b.img" files to my device, and installing Magisk Manager. I patched them and transferred them back to my PC.
To "flash" (restore) the patched files I decided to cut 'n' paste the two lines regarding them from your Reference.xml file into your rawprogram-specific-files.xml file, replacing your example lines.
I executed your run_write-files.ps1 script and it completed successfully.
Not wanting to fiddle again with the hardware buttons (just so that I can get the reboot option), I backed up the patched files using the original tool and rebooted. Now my device is successfully rooted.
Thank you!
Additional notes and suggestions:
1. Can you please investigate the "false" warnings? See my (redacted) log file attached;
2. It would be great if you could create/duplicate a script within your expanded tool set (or main program) to determine and set the appropriate COMPort (and teach us non-coders the actual commands);
3. Would you also consider investigating and including a reboot device script? (It looks like the original tool calls reset.xml);
4. Note that, at the time of reporting this, the latest versions for the Manager and Magsk are 8.02 (307) and 21.0 (21000) respectively, and that I had to switch the update channel to "beta" for the patched files to pass SafetyNet;
5. Because rooting is a likely use of your tool I am attaching my modified rawprogram-specific-files.xml file which targets the boot files for convenience.
bobthenormal said:
...
Additionally.. if I ever get around to it... I plan to upload all three A9 firmware packages for the US version which can be flashed with the EDL tools in this thread....
Click to expand...
Click to collapse
If this can help me get my A10 device to a state where I can install a custom recovery and cutom ROMs, I would appreciate it!
eKeith said:
Ok Bob I gave it a go and successfully rooted my A2020U running stock A10 v2.09. This is my experience...
Firstly, my A2020U could not connect so I used the @Unjustified Dev Tool ("original tool") to easily determine my com port (i.e. 3). I edited the your scripts accordingly (using Notepad++) and got connected.
I'd rather not fiddle with the hardware buttons to change modes so I used the CLI to "adb reboot edl" to get into EDL mode.
I executed the backup_all.ps1 script.
It echoed several "warnings" indicating that it could not find files. However, the created backup folders did in fact include those files.
I noted that none of the "A" slot files include the "_a" postfix; the "B" slot files did include "_b".
Now I needed to transfer those boot files to my device by first rebooting my device and connecting via MTP.
I noted that the original tool offered a reboot menu option (but sadly only after executing a successful operation). So, not wanting to fiddle, I used the original tool to backup my boot files, then used the menu option to reboot; On my device I then manually selected it to connect via MTP.
After transferring the "boot.img" and "boot_b.img" files to my device, and installing Magisk Manager. I patched them and transferred them back to my PC.
To "flash" (restore) the patched files I decided to cut 'n' paste the two lines regarding them from your Reference.xml file into your rawprogram-specific-files.xml file, replacing your example lines.
I executed your run_write-files.ps1 script and it completed successfully.
Not wanting to fiddle again with the hardware buttons (just so that I can get the reboot option), I backed up the patched files using the original tool and rebooted. Now my device is successfully rooted.
Thank you!
Additional notes and suggestions:
1. Can you please investigate the "false" warnings? See my (redacted) log file attached;
2. It would be great if you could create/duplicate a script within your expanded tool set (or main program) to determine and set the appropriate COMPort (and teach us non-coders the actual commands);
3. Would you also consider investigating and including a reboot device script? (It looks like the original tool calls reset.xml);
4. Note that, at the time of reporting this, the latest versions for the Manager and Magsk are 8.02 (307) and 21.0 (21000) respectively, and that I had to switch the update channel to "beta" for the patched files to pass SafetyNet;
5. Because rooting is a likely use of your tool I am attaching my modified rawprogram-specific-files.xml file which targets the boot files for convenience.
Click to expand...
Click to collapse
Nice! :good:
For the questions..
0. Thanks for the heads up on filenames! I completely missed that the _a files don't have the labels... As you probably noticed all the files are backed up correctly still (no missing/overwritten files), but I removed the _a from all the A slot files. That was my original "fix", so I guess I started building this package before I got annoyed by not having the _a/_b consistency. I'll update the correct XML file and upload it as a new version.
1. Don't worry about those! They're part of using the fh_loader interface. Warnings are usually just fine, ERRORS are bad. I'll add a note to the post when I get a chance so people don't get scared by that.
It's only when you do a backup the program is really only designed in the "writing" sense, for backups you literally run an identical XML to writing but you send a flag that reverses the process. So it weirdly checks if the files it is going to copy (which of course don't exist) exist, and it throws the standard warning, but then it just creates them (of course).
I can't turn those off without lowering the verbosity setting for that tool. I decided to leave it set to high because if someone has a problem and they post their log file (like so!) it's very useful to troubleshoot.
2. I'll think about it / try. Not very hard to program but a little time consuming.
I'll throw a copy of lsusb.exe in the next version. Windows port of the linux command. People can simply run that on a command prompt and it will list all the active COM ports/devices. If you're not familiar with it - you can also find out by clicking on the windows start bar or pressing the windows key and typing in "Device Manager". In the hardware list there is a category for COM ports where it lists them.
3. Yeah that's very easy I'll put one in the next version as well.
4. Helpful to know. Interesting that you needed beta to pass... I didn't think to mention I use the canary builds (not really recommended... the current one crashes when I try to hide Magisk Manager lol)
5. Thanks! Maybe I should make a directory specific to boot backup/write... but I do think anyone not comfortable doing the change you did might not want to be flashing their boot files anyway haha.. things to consider I guess.
As for getting you back from A10, definitely. I'll figure out how to upload them to one of those file sharing sites in a week or two.
In the mean time, with a backup from this tool you're safe (as far as bricking goes, you'll have to system wipe) to try rafy's EDL backup to revert to A9. I'll find the actual post... I should have been less lazy and linked it in my post lol... HERE - rafyvitto's EDL.
If flashing his backup doesn't boot right away try the tool I included to fix the bootable partition. If it still doesn't work after that (maybe mention here what happened) then just restore your backup.
Do you have the 128gb phone by chance?
Thanks much, especially for your detailed clarifications and convenient link!
I have the 8/256GB (P855A03_NA) model.
PS
I want to spend more time on ensuring I have a complete device backup before nuking with another EDL; will dedicate some time this week...
Sent from my ZTE A2020U Pro using Tapatalk
eKeith said:
Thanks much, especially for your detailed clarifications and convenient link!
I have the 8/256GB (P855A03_NA) model.
PS
I want to spend more time on ensuring I have a complete device backup before nuking with another EDL; will dedicate some time this week...
Sent from my ZTE A2020U Pro using Tapatalk
Click to expand...
Click to collapse
Oh nice, with the 256gb model you're good to use the userdata backup program too. Sounds ideal for you since, like me, you want a really bulletproof backup. If you run a full backup and then run the userdata backup you literally have a "phone state" so you can return your phone back to exactly where it was, not have to wipe system or anything.
Of course I'd hate to be wrong so as usual, do at your own risk! Lol. But I am using that method and it has worked great. The downside being over an hour of waiting for the userdata to download or upload... and having to store 256gb (for long term storage you can compress it down to literally a few gb).
I've been kinda busy, but working on getting some of those things from my last post done hopefully this week.
bobthenormal said:
Oh nice, with the 256gb model you're good to use the userdata backup program too. Sounds ideal for you since, like me, you want a really bulletproof backup. If you run a full backup and then run the userdata backup you literally have a "phone state" so you can return your phone back to exactly where it was, not have to wipe system or anything.
Of course I'd hate to be wrong so as usual, do at your own risk! Lol. But I am using that method and it has worked great. The downside being over an hour of waiting for the userdata to download or upload... and having to store 256gb (for long term storage you can compress it down to literally a few gb).
I've been kinda busy, but working on getting some of those things from my last post done hopefully this week.
Click to expand...
Click to collapse
That's great to know! Your user data backup option has simplified my life.
I will wait for your next revision to do a full backup plus user data before nuking.
I am looking forward to moving on from ZTE's A10 to one of Ray's ROMs...
Sent from my PH-1 using Tapatalk
Updated to 1.1a - kind of had to rush on some things so keep an eye out for mistakes, especially in the XML files, and let me know if you find any.
Should have an 1.09 (A9) firmware package up "Soon(TM)", just have to make the xml files then upload the file somewhere.
EDIT: Already needed to update to 1.1b - I found that the GPT_Tools had a big error that probably was there since 1.0 and no one noticed! Backups of the GPT should now actually work...
Thank you @bobthenormal !
Looking forward to your A9 EDL backup...
Sent from my PH-1 using Tapatalk
eKeith said:
Thank you @bobthenormal !
Looking forward to your A9 EDL backup...
Sent from my PH-1 using Tapatalk
Click to expand...
Click to collapse
It's up -- see the new thread.
I didn't have time to test it so make sure you backup but I'm 99,99% sure it will work. I tested it several times in the past, but to make the firmware package I took out all the (I hope) unnecessary files.
There's one thing I'm not sure of - whether you'll need to use the Fix Bootable tool after installing it. IF you need to, then I believe you will have to install it to partition B and then run fix bootable B. (The 1.10 backup was taken originally from the B partition).
If you find that it works without having to do that, let me know... it may not be necessary if wherever that bootable flag is stored didn't get included in the firmware package.
bobthenormal said:
It's up -- see the new thread.
I didn't have time to test it so make sure you backup but I'm 99,99% sure it will work. I tested it several times in the past, but to make the firmware package I took out all the (I hope) unnecessary files.
There's one thing I'm not sure of - whether you'll need to use the Fix Bootable tool after installing it. IF you need to, then I believe you will have to install it to partition B and then run fix bootable B. (The 1.10 backup was taken originally from the B partition).
If you find that it works without having to do that, let me know... it may not be necessary if wherever that bootable flag is stored didn't get included in the firmware package.
Click to expand...
Click to collapse
Thank you @bobthenormal !
I should be able to give it a go this weekend and inform...
Sent from my PH-1 using Tapatalk
I published a script that can automatically resign GrapheneOS OTAs with your own keys, and also optionally apply a few modifications like enabling ADB root (without turning on ro.debuggable), ignoring allowbackup and changing the update URL.
You can use it if you like GrapheneOS (I think it's the Android OS with the best engineering, security and privacy), but would also like to have full control of your device, by controlling the verified boot keys of your device and applying modifications that make the OS do what you want regardless of what upstream OS developers, app developers, or anyone else might want.
Note that, on the other hand, GrapheneOS follows the Google Android security model which says that the OS will not perform an action you want it to perform if it may result in something that "application developers, content producers, service providers, and employers" do not consent to (which means not letting you have root, or ignore app wishes regarding backups and other settings, or send arbitrary responses to app requests, etc.), while this script will let you do what you want with your own device regardless of whether it's in anyone else's interest or not, including things that this script does not itself support since you control the verified boot keys of the device and can thus sign anything; all this while still taking advantage of all the security and privacy features in GrapheneOS, including verified boot.
You can find it at https://github.com/chriswoope/resign-android-image
Currently it's intended for people with good technical knowledge, although once you set it up (if you run Qubes a lot of steps are automated) it should continue working with no or minimal intervention.
Thank you very much for this
Hi, do you still update your tools? I've changed quite some things while traing to get this running for a Pixel 7....
I had to adept quite some changes (e.g. for init_boot on A13 shipped device, incresed HeapSize for Java, as SmailPatcher crashes, problems while generating keys with signify-openbsd and also missing tools like zip and unzip on a fresh installed debian), but in the end I received a nice zip which I've flahsed to the device, but I ended up in a Bootloop (Google Logo, Graphene Logo, some seconds and then.. reboot).
So, did someone got this running with A13 (and at best also on a Pixel 7)?
pmatj said:
Hi, do you still update your tools? I've changed quite some things while traing to get this running for a Pixel 7....
I had to adept quite some changes (e.g. for init_boot on A13 shipped device, incresed HeapSize for Java, as SmailPatcher crashes, problems while generating keys with signify-openbsd and also missing tools like zip and unzip on a fresh installed debian), but in the end I received a nice zip which I've flahsed to the device, but I ended up in a Bootloop (Google Logo, Graphene Logo, some seconds and then.. reboot).
So, did someone got this running with A13 (and at best also on a Pixel 7)?
Click to expand...
Click to collapse
I was not able to get this working myself unfortunately
but using a different script called AVBRoot and using it on a self built build of GrapheneOS I am able to lock the bootloader with Magisk Root
I have created this guide to help people https://forum.xda-developers.com/t/...-using-rooted-grapheneos-magisk-root.4510295/
pmatj said:
Hi, do you still update your tools? I've changed quite some things while traing to get this running for a Pixel 7....
I had to adept quite some changes (e.g. for init_boot on A13 shipped device, incresed HeapSize for Java, as SmailPatcher crashes, problems while generating keys with signify-openbsd and also missing tools like zip and unzip on a fresh installed debian), but in the end I received a nice zip which I've flahsed to the device, but I ended up in a Bootloop (Google Logo, Graphene Logo, some seconds and then.. reboot).
So, did someone got this running with A13 (and at best also on a Pixel 7)?
Click to expand...
Click to collapse
Hey, did you ever get this working on Pixel 7?
User.Hemlock said:
Hey, did you ever get this working on Pixel 7?
Click to expand...
Click to collapse
You can use AVBRoot to patch and sign roms to get root with a locked boot loader using GrapheneOS
I wrote a guide here https://forum.xda-developers.com/t/...-using-rooted-grapheneos-magisk-root.4510295/
FireRattus said:
You can use AVBRoot to patch and sign roms
Click to expand...
Click to collapse
Thanks! Haven't had a chance to dig into AVBroot yet, but I'm guessing the patching capability would include things like ignoring allowbackup? (that was one of OP's features that I was interested in)
User.Hemlock said:
Thanks! Haven't had a chance to dig into AVBroot yet, but I'm guessing the patching capability would include things like ignoring allowbackup? (that was one of OP's features that I was interested in)
Click to expand...
Click to collapse
The main purpose of AVBRoot is to root and sign an image so that with pixel devices for example you can lock the bootloader and have root
With root you can achieve ignoring the allowbackup, I believe you could do this with xposed
I also just use root apps like Swift Backup to backup everything on my device