Related
Hi all,
i've installed the Tasker Trial (from the developer site) a few days ago on my SGS III (no root, using stock rom).
I want Tasker to disable my Lockscreen security when i'm at home. Recently i tried this setup:
Profile: Trusted Zone
State: Wifi Connected [ SSID:ssid1/ssid2 MAC:* IP:* ]
A1: Secure Settings [ Configuration:Clear Password/Wait For Unlock ]
Profile: Untrusted Zone
State: Not Wifi Connected [ SSID:ssid1/ssid2 MAC:* IP:* ]
Abort Existing Task
A1: Secure Settings [ Configuration:Set Pin ]
Click to expand...
Click to collapse
I've tried nearly every setting i could imagine. With and without "Secure settings" plugin, pattern or pin on lockscreen, foregrund mode with notification icon or background without notification. Also i've registered Tasker and secure settings plugin as device admin in security settings.
My problem is, after setting up all necessary profiles and tasks everything seems to be fine, but after a while the display is locked even though i'm connected to my wifi at home. (yes, wifi is enabled all the time, even in lockscreen ;-) )
Also i've noticed that tasker sometimes displays a notification saying "Low memory". On SGS3? Realy?
I hope anyone could help me how to run tasker in a reliable way on sgs3.
Thanks in advance.
Hey man, sorry I can't help but I am running one task on my Spirit GS III.
My task is to connect to Wi-Fi according to the near cell tower.
Anyway, mine seems to be working just fine.
Sent from my SPH-L710 using xda app-developers app
I dint think everything is perfect with tasker and ics. I think I red in the google groups about some things that may not function perfectly.
I have my lockscreen disabled when Bluetooth is connected in my car, and when it's connected to power. Sometimes it works, sometimes it doesn't. Sorry, that's the best I can offer you.
Sent from my GT-P1000 using Tapatalk 2
I've used tasker since my desire days. I had profiles that turn wifi on and off and go into silent mode etc.
The only profile that doesn't work for me is turning off the LED. In fact for me I haven't found anything that will turn off the LED
Sent from my GT-I9300 using Tapatalk 2
Thank you guys.
I've also searched the web.
Unfortunately, i think there is a problem with Tasker and ICS (especially with SGS3?).
Maybe there will be an update for tasker...
Does anyone of you knows an app which allows me to control the Lockscreen behaviour through Wifi status?
eLiTeFLO said:
Does anyone of you knows an app which allows me to control the Lockscreen behaviour through Wifi status?
Click to expand...
Click to collapse
Give Delayed Lock a go, there's a free trial in the store. Works perfectly on the S3
Sent from my CM9 TouchPad
It's working like a charm for me to enable/disable the lock screen security with Tasker and secure settings. I need it because of our Internet certificate at our University.
fl4m3y said:
It's working like a charm for me to enable/disable the lock screen security with Tasker and secure settings. I need it because of our Internet certificate at our University.
Click to expand...
Click to collapse
Can you post your setting for Tasker and secure settings please. Do you use pin or pattern on the lockscreen?
@Isadora: I'll give it a try
Sent from my GT-I9300 using xda app-developers app
Yes No problem... I just need to translate my tutorial. Just wait a bit
And I'm using pattern
eLiTeFLO said:
Can you post your setting for Tasker and secure settings please. Do you use pin or pattern on the lockscreen?
@Isadora: I'll give it a try
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
I use Pattern, and this worked for me.
1)
Press the "+" to create a new profile. Name it what you want (I called it "unlock at home")
Press the "state" button.
Press the "Net" button.
Press the "Wifi Connected" button
Press the search button for the "SSID" and choose your network (wifi must be turned on!)
Press the green accept button.
2)
Now the "Task Selection" window appear.
Press "New Task" and name it whatever you want (I called it "Unlock")
Press the "+" button
Press the "Display" button
Press the "Keyguard" button
Set the Keyguard status to "Off"
Press the green accept button.
Press the green accept button again.
3)
Now you are back at the main profile window. Long press on the name you made for 2).
Press "Add Exit Task"
Press "new task" and name it what you want (I called it "Lock")
Press the "+"
Press the "Display"
Press the "Keyguard"
Set the status to "On"
Press green accept button.
You are done.
Now you phone will disable the keyguard when you are connected your home wifi network and enable it when you are not connected.
Notice. If you turn the screen off and on again within a second or two, the screen will turn off again, dunno why. So when you test it, turn the screen off and wait like 5 seconds and then turn it on.
Good luck
fl4m3y said:
Yes No problem... I just need to translate my tutorial. Just wait a bit
And I'm using pattern
Click to expand...
Click to collapse
I made this tutorial for the eduroam networks at german/european universities. In this tutorial it will be explained how to setup an automatic enableing/disableing pattern lock. At my university place I have to use pattern or pin lock because of the "telekom root ca 2 certificate", otherwise the internet won't work. So the described steps should be very similar to your problem.
I edited the parts so you can use it 1:1
Requirements:
- Installed and working BusyBox App
- Installed and working Secure Settings App
--->Installed Helper in Secure Settings
- Installed and working Tasker
- Create Lockscreen (Password, Pin or Pattern Lock)
--------------------------------------------------------------------------------------------------
Open Tasker Application:
- Create new profile and name it like you want.
- At the "First Context" choose location and locate the place where you don't need the secure lockscreen. Instead of location you can choose whatever you want. In e.g. WiFi
- If you're done, just add a "New Task" and name it e.g. "deactivate pattern" or how you like
- Add an action ( Plugin -> Secure Settings -> Edit -> choose at DEV ADMIN ACTIONS "Password/Pin" or at HELPER ACTIONS "Pattern Lock"
---> For Password/Pin use these settings:
imageshack.us/photo/my-images/266/screenshot2012071109483.png
---> For Pattern Lock use these settings:
imageshack.us/photo/my-images/69/screenshot2012071109551.png
- Save the settings and check them all. You got a new profile with one task now. Long press at the task and add an "Exit Task". Use the same steps from above ( the last 2 steps ) just name it e.g. "activate pattern"
---> For Password/Pin use these settings:
(Insert your security Informations)
imageshack.us/photo/my-images/267/screenshot2012071109574.png
---> For Pattern Lock use these settings:
imageshack.us/photo/my-images/515/screenshot2012071109571.png
- Save all the settings you made and then you should have a profile which shows minimum one context and 2 tasks ( Input and Exit task)
That's it... i hope it work! If not let me know Tasker and Secure Settings are a very powerful tool and handle them with care!
Good Luck
Thanks to all of you.
Today i've tried the Trial version of "Delayed Lock" from the market with the Wifi Plugin.
An what should i say?
It works like a charm :good:
Less features than Tasker, but less expensive...
Nevertheless i will try your profiles even if i think i tried this settings before
Regards
For me it doesn't quite work.
When I turn off the pattern lock, it activates swipe unlock instead of no unlock screen.
I tried to turn off keyguard too, but with no effect at all.
I'm on stock rom with root.
Same for me, but I like it so. Don't know if this is a bug or a feature.
Sent from my GT-I9300 using xda app-developers app
Guys, check Tasker website, there's a beta version there. It might solve your problems.
EDIT: check if you have the latest version: 1.3u1 I haven checked before posting, there is no more beta. Sorry.
Sent from my GT-I9300 using Tapatalk 2
Ok maybe i got something: When you configure a VPN or install a new certificate, Android deactivates the possibilty to choose the less secure options in the security / lockscreen menu. If you now delete any VPN connection and/or user defined certificates, tasker and secure settings should work. At least for me it does. Can anyone verify this?
Changes for 1.1.1:
-Fix issues with being unable to reconnect after a disconnect -- no more needing to reboot after a disconnect
-Fix issue where the check box needed to connect to another device would not show up sometimes
-Fixed a blank toast message that was trying to report a disconnect, now shows a proper error message
-Updated boot logo to one with the teamwin text
1.1.1 is currently only being released as a patch to apply on top of an existing 1.0.0 install.
If you are already running 1.0.0, simply install the update zip. No wiping is needed for the update.
If you don't have my ROM installed right now, you will need to factory reset, install both the 1.0.0 zip followed by the 1.1.1 zip.
There is only one update zip for all models.
We need someone who has a 1GB/8GB/2100MHz model to contact us and supply a boot image from this model of device so that we can offer a properly working boot.img.
Mirror 1
Mirror 2
What this ROM does not have:
-Gestures for back and menu do not work out of he box (there's an Xposed module that you can install to enable them that is free in the Play Store or another app that does not need Xposed documented further down in this post)
-Status bar does not hide itself
-Home + Power does not take a screenshot (Xposed can add screenshot options to the power menu)
-No companion mode that lets you receive calls, texts -- use SWApp Link free in the Play Store for this
-AGPS assistance data doesn't download by default. Use GPS Status and Toolbox to download it instead. GPS is confirmed working.
-Camera is rotated 90 degrees
-If you open the camera app and press the button to use the non-existant front facing camera, the app will FC. You will have to clear app data on the camera app to use the camera again.
-Many APNs are not included. You might have to add yours manually. This is a tethering ROM, not intended to be used with a SIM card.
-Some of the numbers on the stock dialer are not accessible - may be able to fix this with xposed and change the app's dpi.
What this ROM does have that stock Omate does not:
-Fully working native Bluetooth tethering to your phone including push notifications
-Fully working settings app including the ability to delete and change account settings
-Already has EnSec and build prop tweaks
-SuperSU
This is built using some MTK 6572 source for a different device. As such some things will be a lot different and that is the reason that items like the gestures for back and menu do not work.
You do not have to start with a stock ROM. This ROM will completely replace your existing system and boot/kernel.
Download the correct zip for your device. If you don't see your model listed, contact us and DO NOT install:
Mirror 1
Mirror 2
Install TWRP if you haven't and make a backup of your existing System, Data, and Boot
Factory reset
Install zip and reboot. First boot will take longer than usual
On first boot you will see the Welcome screen. Tap in the 4 corners of the app itself (not including the status bar) in a clockwise fashion (see here).
On your phone, turn on Bluetooth, enable Bluetooth tethering, and make your phone visible for pairing
On the watch, open settings. If you don't have a SIM card in the watch, go to more and check the box for airplane mode.
Turn on Bluetooth, find and pair with your phone.
Click on the Settings icon to the right of your phone's name (this is on the watch) Tap on Internet access.
Enjoy!
You will probably want to install Xposed:
You'll probably want to download All in one gestures from the Play Store.
Open Xposed Installer in app drawer, tap on Frameworks. Tap Install/Update. Grant root rights.
Still in Xposed, hit Ok after the install is done. Press the back button (icon in the upper left will also go back). Click on Modules. Check the box for GravityBox and All in one gestures (and probably any other modules).
Still in Xposed, hit back, Frameworks. Scroll down and reboot. Click Okay.
After reboot, open app drawer and find GravityBox, scroll down to Power tweaks. Check the top box for Advanced reboot menu and the box for Screenshot.
Open the All in one gestures app. Tap on the Swipe tab. Enable it. Scroll down to Left Area and tap on it. Choose Menu. Scroll down and tap on Right Area and choose Back.
Click on the All in one gestures icon in the upper left to slide open the menu. Tap on Transparency & Color. Slide the second slider all the way to the left to get rid of the glowing icons on the left and right.
You now have screen shot capability and have restored the stock gestures.
Press and hold power. Press Reboot. Press Reboot. Press OK.
Other recommended apps:
PNF or Push Notifications Fixer - You can use this app to change the frequency that the watch pings Google. When your phone changes connections (e.g. mobile network to Wi-Fi) the framework notifies all apps including apps like Hangouts that the connection has changed so that those apps can reconnect and get push notifications. Unfortunately your phone will not tell your watch when connections change. This app will help you start getting push notifications sooner after a connection change.
GMD Gesture Control - The free version can add a back button gesture. You'll have to buy the paid version to get the menu gesture back.
If you install Xposed framework, you can install this free module called All in one gestures and tweak it to enable gestures for the back and menu buttons.
Notes:
Bluetooth tethering had to be slowed down quite a bit to prevent the driver from crashing. We've slowed it down by setting the tcp buffer sizes really low. You can change the values of net.tcp.buffersize.bt to tweak it if you like. The crash seems to be kernel level or maybe even chip / hardware level.
Bluetooth on MTK is somewhat unstable. If it disconnects due to a driver crash, you may have to reboot the device to get Bluetooth working again. With version 1.1.1, you can probably just reconnect without having to reboot.
I am very busy. I probably won't have time to provide much support for this ROM. I don't owe you anything. If you don't like this ROM, I'll refund your full purchase price of free.
Special thanks to @Lokifish Marz @AdamOutler @toastcfh and @kuronosan
Reserved
Omg! It works great!
Word up!
Sent from my Galaxy Nexus using Tapatalk 2
Awesomesauce!
Dees!!! Ur da man!
hahahahahahah
eat dat MTK!
ROFL
Exactly where do I install the zip drive and do I extract it to the same folder as bt-rom?
syounger64 said:
Exactly where do I install the zip drive and do I extract it to the same folder as bt-rom?
Click to expand...
Click to collapse
don't extract it.
move it into the watch. boot in recovery mode and install zip.
make sure you have a backup of your system if things go sour.
ALWAYS BACKUP BEFORE DOING ANYTHING!!!
Can anybody please tell me what is the bettary life if i use it moderately ?
Sent from my SM-N9005 using XDA Premium 4 mobile app
juanflight said:
don't extract it.
move it into the watch. boot in recovery mode and install zip.
make sure you have a backup of your system if things go sour.
ALWAYS BACKUP BEFORE DOING ANYTHING!!!
Click to expand...
Click to collapse
Thanks but after installing goomanager. It says denied supers request. How do I fix that? How do u boot in recovery mode if my power button isn't doing anything when I press it? When I want to back up of my system is that done via goomanager or supersu?
Sorry for all these questions as I'm not familiar with this process.
Dees_Troy said:
I don't owe you anything. If you don't like this ROM, I'll refund your full purchase price of free.
Click to expand...
Click to collapse
Haha, love it!
You are a great dev Dees. It's people like you that make this place what it is, a haven for tech lovers. Great job!
First thing I did was install myglass app and try and connect it to glass and it still crashes. Oh well hopefully we are going to get something good out of the source release. Thanks Dee's for all you do.
Sigh.... after reading this I got up to install the patch. The watch slipped off my wrist and fell on the floor. The metal clamp came off but I was able to put it back on then found out the power button wasn't working. I don't know if it was the result of the fall but while I was looking at supersu I might have hit on something and the watch rebooted then got stuck until the battery drained out. Is it possible that the power button was disabled?
WOW, so I get mt watches on a Thursday and the best ROM yet comes out on Friday? I couldn't be more excited .. Awesome!
Not that I wont be installing this , just a quick question.. @Dees_Troy what version on the standard android mail client is included in this rom? I havent been able to get my watch logged into exchange. this is a big deal for me as I need to calendar to sync my appointments. Email and contacts from exchange on my watch are not that big a deal for me but the appointments are. Thanks and looking forward to checking out your efforts..
I use gravitybox to enable the navigation bar @60% on stock rom, but can't get it enabled with this rom. is it completely pulled from the framework or is there some other trick to enable the navbar?
Installation aborted
While attempting to install this ROM, I keep receiving the 'Installation aborted' message in recovery. I'm running Loki's setup on my 1/8/1900mhz Omate. Also, when I plug my watch in to my laptop with USB debugging mode on I cannot execute any adb command prompts.
I don't know if the two are related...but I'm sure it is something I screwed up.
Any thoughts?
After install I am having apn issues. On Loki's operative I can get H+ data but only Edge with this. Any suggestions? GoPhone APN settings are correct and have also tried the Att one too.
Everything else seems great so far. Testing BT with Glass next. Will update the post afterwards.
edit#1- I can successfully pair Glass as a headset and also bluetooth tether data. MyGlass does not force close but will not connect when it sees the device.
edit#2- APN settings are borked for HSPA+....
unable to use for internet access
when i check the box to enable internet access, nothing happens.
I am using 1/8/1900 TS
Cheers! This makes some libraries like AllJoyn works!
H3ll0w0rld08 said:
when i check the box to enable internet access, nothing happens.
I am using 1/8/1900 TS
Click to expand...
Click to collapse
samething happens on mine!
I've been using nova launcher for months and finally uninstalled the stock S launcher. Today, I went to put my phone into ultra power saving mode and now I cannot exit it. If I get a notification, I can switch to that app and get into system settings, but I cannot exit ultra power saving mode. Without a notification, I can't even turn the screen off. The home button does nothing (no launcher) and the UPSM toggle is missing from the notification window.
So, my question is- does anyone have the stock APK for the Samsung launcher -OR- know an ADB command or some other way to get out of UPSM?
You didn't say whether you looked at the full quick settings palette or just the selected tiles subset? You should find the power saving tile on the full palette. Also does the phone exit UPSM when you fully charge the phone battery?
If that doesn't work, then just download the firmware for your phone and you can extract the stock launcher with winrar.
.
fffft said:
You didn't say whether you looked at the full quick settings palette or just the selected tiles subset? You should find the power saving tile on the full palette. Also does the phone exit UPSM when you fully charge the phone battery?
If that doesn't work, then just download the firmware for your phone and you can extract the stock launcher with winrar.
.
Click to expand...
Click to collapse
There are no settings tiles. After I get a notification, I can pull down the notification screen (not before) and hit the gear to get the settings page. In there, there's only wifi, bluetooth, airplane mode, mobile networks, location, sound, and brightness. There's no way to get rid of UPSM.
Fully charging it didn't work. Fully discharging it didn't work. Wiping cache and dalvik didn't work.
Can you provide a link to the file in question? I'm not entirely clear on your terminology. I thought the firmware was just for the radio and such while the rom had the program files?
Kayden96 said:
There are no settings tiles. After I get a notification, I can pull down the notification screen (not before) and hit the gear to get the settings page. In there, there's only wifi, bluetooth, airplane mode, mobile networks, location, sound, and brightness. There's no way to get rid of UPSM.
Fully charging it didn't work. Fully discharging it didn't work. Wiping cache and dalvik didn't work.
Can you provide a link to the file in question? I'm not entirely clear on your terminology. I thought the firmware was just for the radio and such while the rom had the program files?
Click to expand...
Click to collapse
Have you rebooted? Usually does it for me.
I tried taking the battery out, restoring my SYSTEM backup from a few months ago, upgrading to a newer version of the stock rom, and nothing works.
Everything I've tried ends up with the phone going back into UPSM with no way to leave it.
Kayden96 said:
I tried taking the battery out, restoring my SYSTEM backup from a few months ago, upgrading to a newer version of the stock rom, and nothing works.
Everything I've tried ends up with the phone going back into UPSM with no way to leave it.
Click to expand...
Click to collapse
If you are using TWRP there is a file manager under advanced. Use that to navigate to the /system/app directory and rename "Emergency" apk to have .back appended to the end after the .apk. This will "hide" it from the system and should disable it. Btw the name of the apk has Emergency in it i don't recall the exact name of it though.
Kayden96 said:
Can you provide a link to the file in question?
Click to expand...
Click to collapse
No we can't. And the reason that we can't is that you didn't provide any details about your phone. The firmware is different for every model of S5 and carrier. We don't know if you have a 900T, 900F, 900A or some other S5 version. We can't see your phone and can do little unless you provide extensive details.
Simply go to a firmware site like sammobile, click on firmware and enter the model number of your phone. Or do a search of this forum. Then use the Odin program to write that firmware (factory software) to your phone.
.
I'm having the same issue on a Verizon S5. Under /system in twrp I don't see anything. Tried chmod but didn't help. Any suggestions?
Apps Drawer
Same thing happened to me. Mine was stuck in between normal and Ultra. I was able to go to my apps drawer, clicked on the gear/settings, found Power then disabled Ultra Power Saving mode there.
I had same issue and I SOLVED it.
No disable option in the notification drawer. Gear 'setting' option (in the notification drawer) only display few setting options (no disable ultra saving mode).
I solve the issue by holding down the HOME button to trigger Google NOW app. In the search bar of Google NOW app, I clicked the microphone button and said "OPEN SETTINGS". This will open the full version of setting window. If you scroll down, you will see the 'POWER SAVING MODE', click it and you will see the disable "ULTRA POWER SAVING MODE" option.
It's a unusual way but it worked.
I also faced the same issue while running Action Launcher 3. Google Now wasn't working for me, so the way I solved it is:
- press and hold the menu button (capacitive button on the left) and select "Manage Apps"
- from the three dots on the top right corner select "Reset app preferences"
- reboot
- pressing the home button showed up "TouchWiz Home", which then allowed me to select "Disable Ultra Power Savings mode"
-done
HTH
I have they same problem with S5 LTE+ on Android 4.4.4. (I hate this ****ing bad Samsung Software!!!!) The above two posts unfortunatly don't work for me because Google Now is not working and Home Button does nothing.
I will try to launch settings due adb if I find a PC to do this (Unfortunatly I'm on holiday at the moment)
Were you able to figure this out? Facing the same issue on my friends phone. Can't believe Samsung would takeover the phone like this.
kussface said:
Were you able to figure this out? Facing the same issue on my friends phone. Can't believe Samsung would takeover the phone like this.
Click to expand...
Click to collapse
Best I remember, it had something to do with disabling the stock launcher and I ended up reflashing.
thug_life_inc brought me to my personal solution. I had the problem with the Google Now Launcher. And there is the possibility to go to the app info by placing an app on the home screen, but not dropping it there, but above it (you know the area where you can access app info / delete the app).
That brought me to the settings page for the google app where i could delete the standard launching options.
I had very low battery (maybe 3 or 2%) and then i activated the ultra power saving mode. After a while, the phone battery died, so I recharged it. The problem now is that I got stucked in UPSM. Everything is black and white, I have no acces at any of my apps and the settings is incomplete, I mean I don`t find the "disable UPSM" function. I also cannot factory reset the phone, same reason, I only have acces to wi-fi, bluetooth, volume, brightness and location.
Thank you!!!!
Strykes_Daniel said:
thug_life_inc brought me to my personal solution. I had the problem with the Google Now Launcher. And there is the possibility to go to the app info by placing an app on the home screen, but not dropping it there, but above it (you know the area where you can access app info / delete the app).
That brought me to the settings page for the google app where i could delete the standard launching options.
Click to expand...
Click to collapse
Thank you! It worked for me!
I tried multiple methods include using microphone to trigger Google Now but still nothing in Settings. The idea is trigger the Launcher Picker. here are some notes
Wish I new this sooner, wasted a whole day figuring it out. This fix is way easier
The easy fix - just open the app drawer, drag the google app to app info and drop, clear defaults , when prompted choose you service providers origional default launcher
parislawrence said:
The easy fix - just open the app drawer, drag the google app to app info and drop, clear defaults , when prompted choose you service providers origional default launcher
Click to expand...
Click to collapse
That is not possible .. in UPSM there is no app drawer or any apps settings.
Hi, this may have been asked before, but I can't seem to find a straight answer for it:
I've got a Huawei Mate 10 Pro. The damn phone keeps killing apps running in the background, no matter how I configure the "Launch" menu. Is there any way to prevent the phone from killing apps running in the background? Even the 'Lock' button on the apps in the app manager screen doesn't prevent that from happening!
It's worth mentioning that my phone is not rooted, nor is going to be any time soon, since it seems so much riskier to root this phone than it is with other phones.
.......delet.....
Go to settings - battery - launch and find the app you don't want to be terminated then change to manual mode(ensure that you enable the 3 options especially run in background)
Or go to special access - ignore Battery optimization - select all apps then scroll to the app you want not to be terminated, tap on it, select allow then click OK and exit
zayidhs said:
Go to settings - battery - launch and find the app you don't want to be terminated then change to manual mode(ensure that you enable the 3 options especially run in background)
Or go to special access - ignore Battery optimization - select all apps then scroll to the app you want not to be terminated, tap on it, select allow then click OK and exit
Click to expand...
Click to collapse
Amazing, thank you very very much!!
Honestly, the power settings on this phone are horrible!
You're welcome
A lot of settings need to do.
https://consumer.huawei.com/en/support/how-to/newbie-guide/en-us00428704/
Loving my Mate 20 Pro, coming from HTC U11 big difference! (though to be honest am missing my phone a bit :crying: )
Anyway on the HTC I had the option to hide apps from the app list/drawer. Not uninstall them, just hide them from the list of installed apps. Is this possible with the Huwaei? Don't want nosy husband/kids to know all the apps I have installed. And yes they all have access to my phone
EMUI has a "Hidden Application Menu" which you can access by doing a two finger zoom gesture on the home screen (reverse of a pinch)
After opening this tap the + to add apps. Then just pinch to go back to normal.
Just remembered - this is disabled by default on the M20P so do the following:
- Install "Tweaker for Huawei" from the Play Store
- When you go to turn on the hidden application menu it will say you can't and to download an addon
- download the addon and tap to install it - you will be prompted to allow installs
- enable the hidden application menu then restart the phone
That should be it.
Grondah said:
EMUI has a "Hidden Application Menu" which you can access by doing a two finger zoom gesture on the home screen (reverse of a pinch)
After opening this tap the + to add apps. Then just pinch to go back to normal.
Just remembered - this is disabled by default on the M20P so do the following:
- Install "Tweaker for Huawei" from the Play Store
- When you go to turn on the hidden application menu it will say you can't and to download an addon
- download the addon and tap to install it - you will be prompted to allow installs
- enable the hidden application menu then restart the phone
That should be it.
Click to expand...
Click to collapse
Thank you! I have installed and installed the add on and enabled hidden application menu no problem. I am zooming in on all screens, nothing. Zooming in on all pages does nothing, and cannot find a setting anywhere to hide an app.
You need to zoom out XD
Aha I actually meant out as in a reverse pinch. Nothing a happening
And your setting in Tweaker looks like this?
https://drive.google.com/file/d/1ZSflN9lSx3biVDRbZOVC6zlY1A1hfxHX/view?usp=sharing
Yes exactly.
Then I don't know That should be it as long as you restarted the phone after enabling it.
Grondah said:
Then I don't know That should be it as long as you restarted the phone after enabling it.
Click to expand...
Click to collapse
Yes strange, I did restart phone. I'll try again.
thank you very much
I can now hide applications running on my Mate 20 pro
I have been faced with the problem of hiding applications but applied the solution suggested by you, but I must explain to you why you did not work first after you have all the steps listed + restart the device must return to the same option and activate it again and on activation you will see a message that was activated and after this step You must change Drawer and make Standard and then work with you
Ddragonov said:
thank you very much
I can now hide applications running on my Mate 20 pro
I have been faced with the problem of hiding applications but applied the solution suggested by you, but I must explain to you why you did not work first after you have all the steps listed + restart the device must return to the same option and activate it again and on activation you will see a message that was activated and after this step You must change Drawer and make Standard and then work with you
Click to expand...
Click to collapse
How do I change the drawer to standard?
dragona said:
How do I change the drawer to standard?
Click to expand...
Click to collapse
Search for drawer in settings.
Ddragonov said:
thank you very much
I can now hide applications running on my Mate 20 pro
I have been faced with the problem of hiding applications but applied the solution suggested by you, but I must explain to you why you did not work first after you have all the steps listed + restart the device must return to the same option and activate it again and on activation you will see a message that was activated and after this step You must change Drawer and make Standard and then work with you
Click to expand...
Click to collapse
Hello, if you change "Drawer" to "Standard" and now hide the app and then select back "Drawer", does the app stays hidden or it shows inside the app drawer?
Thank you
Not working it says root is required to apply
musamaashraf said:
Not working it says root is required to apply
Click to expand...
Click to collapse
says in google play, that the no-root addon has been removed due to google rules... so you need root for it to work
Firething said:
says in google play, that the no-root addon has been removed due to google rules... so you need root for it to work
Click to expand...
Click to collapse
anyway to get the no-root addon ??
musamaashraf said:
anyway to get the no-root addon ??
Click to expand...
Click to collapse
https://drive.google.com/file/d/1w_0sKbiMf2z1pplqMbs1drU496tPn999/view?usp=drivesdk
Sermpie said:
https://drive.google.com/file/d/1w_0sKbiMf2z1pplqMbs1drU496tPn999/view?usp=drivesdk
Click to expand...
Click to collapse
Thanks Man!