[GUIDE] Pixel 3 "blueline": Unlock Bootloader, Update, Root, Pass SafetyNet - Google Pixel 3 Guides, News, & Discussion

If you are looking for my guide on a different Pixel, find it here:
Pixel 3XL
Pixel 3a
Pixel 3aXL
Pixel 4
Pixel 4XL
Pixel 4a
Pixel 4a (5G)
Pixel 5
Pixel 5a
Pixel 6
Pixel 6 Pro
For best results, use the latest stable Magisk release.
Discussion thread for migration to 24.0+.
Note: Magisk prior to Canary 23016 does not incorporate the necessary fixes for Android 12+.
WARNING: YOU AND YOU ALONE ARE RESPONSIBLE FOR ANYTHING THAT HAPPENS TO YOUR DEVICE. THIS GUIDE IS WRITTEN WITH THE EXPRESS ASSUMPTION THAT YOU ARE FAMILIAR WITH ADB, MAGISK, ANDROID, AND ROOT. IT IS YOUR RESPONSIBILITY TO ENSURE YOU KNOW WHAT YOU ARE DOING.
Prerequisites:
Latest SDK Platform Tools - if Platform Tools is out of date, you WILL run into problems!
USB Debugging enabled
Google USB Driver installed
I recommend using Command Prompt for these instructions; some users have difficulty with PowerShell.
Make sure the Command Prompt is running from your Platform Tools directory!
Android Source - Setting up a device for development
Spoiler: Downloads
Pixel OTA Images
Pixel Factory Images
Magisk Stable, Magisk Canary - Magisk GitHub
Spoiler: Unlock Bootloader
Follow these instructions to enable Developer Options and USB Debugging.
Enable OEM Unlocking. If this option is grayed out, unlocking the bootloader is not possible.
Connect your device to your PC, and open a command window in your Platform Tools folder.
Ensure ADB sees your device:
Code:
adb devices
If you don't see a device, make sure USB Debugging is enabled, reconnect the USB cable, or try a different USB cable.
If you see "unauthorized", you need to authorize the connection on your device.
If you see the device without "unauthorized", you're good to go.
Reboot to bootloader:
Code:
adb reboot bootloader
Unlock bootloader: THIS WILL WIPE YOUR DEVICE!
Code:
fastboot flashing unlock
Select Continue on the device screen.
Spoiler: Initial Root / Create Master Root Image
Install Magisk on your device.
Download the factory zip for your build.
Inside the factory zip is the update zip: "device-image-buildnumber.zip". Open this, and extract boot.img
Copy boot.img to your device.
Patch boot.img with Magisk: "Install" > "Select and Patch a File"
Copy the patched image back to your PC. It will be named "magisk_patched-23xxx_xxxxx.img". Rename this to "master root.img" and retain it for future updates.
Reboot your device to bootloader.
Flash the patched image:
Code:
fastboot flash boot <drag and drop master root.img here>
Reboot to Android. Open Magisk to confirm root - under Magisk at the top, you should see "Installed: <Magisk build number>
Spoiler: Update and Root Automatic OTA
Before you download the OTA, open Magisk, tap Uninstall, then Restore Images. If you have any Magisk modules that modify system, uninstall them now.
Take the OTA update when prompted. To check for updates manually, go to Settings > System > System Update > Check for Update
Allow the update to download and install. DO NOT REBOOT WHEN PROMPTED. Open Magisk, tap Install at the top, then Install to inactive slot. Magisk will then reboot your device.
You should now be updated with root.
Spoiler: Update and Root OTA Sideload
Download the OTA.
Reboot to recovery and sideload the OTA:
Code:
adb reboot sideload
Once in recovery:
Code:
adb sideload ota.zip
When the OTA completes, you will be in recovery mode. Select "Reboot to system now".
Allow system to boot and wait for the update to complete. You must let the system do this before proceeding.
Reboot to bootloader.
Boot the master root image (See note 1):
Code:
fastboot boot <drag and drop master root.img here>
Note: If you prefer, you can download the factory zip and manually patch the new boot image, then flash it after the update. Do not flash an older boot image after updating.
Your device should boot with root. Open Magisk, tap Install, and select Direct Install.
Reboot your device. You should now be updated with root.
Note: You can use Payload Dumper to extract the contents of the OTA if you want to manually patch the new boot image. However, I will not cover that in this guide.
Spoiler: Update and Root Factory Image
Please note that the factory update process expects an updated bootloader and radio. If these are not up to date, the update will fail.
Download the factory zip and extract the contents.
Reboot to bootloader.
Spoiler: Update bootloader if necessary
Compare bootloader versions between phone screen and bootloader.img build number
Code:
fastboot flash bootloader <drag and drop new bootloader.img here>
If bootloader is updated, reboot to bootloader.
Spoiler: Update radio if necessary
Compare baseband versions between phone screen and radio.img build number
Code:
fastboot flash radio <drag and drop radio.img here>
If radio is updated, reboot to bootloader.
Apply update:
Code:
fastboot update --skip-reboot image-codename-buildnumber.zip
When the update completes, the device will be in fastbootd. Reboot to bootloader.
Boot the master root image (See note 1):
Code:
fastboot boot <drag and drop master root.img here>
Note: If you prefer, you can manually patch the new boot image, then flash it after the update. Do not flash an older boot image after updating.
Your device should boot with root. Open Magisk, tap Install, and select Direct Install.
Reboot your device. You should now be updated with root.
Note: If you prefer, you can update using the flash-all script included in the factory zip. You will have to copy the script, bootloader image, radio image, and update zip into the Platform Tools folder; you will then have to edit the script to remove the -w option so it doesn't wipe your device.
The scripted commands should look like this:
Code:
fastboot flash bootloader <bootloader image name>
fastboot reboot bootloader
ping -n 5 127.0.0.1 > nul
fastboot flash radio <radio image name>
fastboot reboot bootloader
ping -n 5 127.0.0.1 > nul
fastboot update --skip-reboot <image-device-buildnumber.zip>
Once this completes, you can reboot to bootloader and either boot your master patched image, or if you patched the new image, flash it at this time.
Spoiler: Update and Root using PixelFlasher <<RECOMMENDED FOR NOVICES>>
PixelFlasher by @badabing2003 is an excellent tool that streamlines the update process - it even patches the boot image for you.
The application essentially automates the ADB interface to make updating and rooting much easier. However, it is STRONGLY recommended that you still learn the "basics" of using ADB.
For instructions, downloads, and support, please refer to the PixelFlasher thread.
Spoiler: Update and Root using the Android Flash Tool
Follow the instructions on the Android Flash Tool to update your device. Make sure Lock Bootloader and Wipe Device are UNCHECKED.
When the update completes, the device will be in fastbootd. Reboot to bootloader.
Boot the master root image (See note 1):
Code:
fastboot boot <drag and drop master root.img here>
Note: If you prefer, you can download the factory zip and manually patch the new boot image, then flash it after the update. Do not flash an older boot image after updating.
Your device should boot with root. Open Magisk, tap Install, and select Direct Install.
Reboot your device. You should now be updated with root.
Spoiler: Pass SafetyNet/Play Integrity
SafetyNet has been deprecated for the new Play Integrity API. More information here.
In a nutshell, Play Integrity uses the same mechanisms as SafetyNet for the BASIC and DEVICE verdicts, but uses the Trusted Execution Environment to validate those verdicts. TEE does not function on an unlocked bootloader, so legacy SafetyNet solutions will fail.
However, @Displax has modified the original Universal SafetyNet Fix by kdrag0n; his mod is able to force basic attestation instead of hardware, meaning that the device will pass BASIC and DEVICE integrity.
Mod available here. Do not use MagiskHide Props Config with this mod.
This is my configuration that is passing Safety Net. I will not provide instructions on how to accomplish this. Attempt at your own risk.
Zygisk + DenyList enabled
All subcomponents of these apps hidden under DenyList:
Google Play Store
GPay
Any banking/financial apps
Any DRM media apps
Modules:
Universal SafetyNet Fix 2.3.1 Mod - XDA post
To check SafetyNet status:
YASNAC - GitHub
To check Play Integrity status:
Play Integrity Checker - NOTE: MEETS_STRONG_INTEGRITY will ALWAYS fail on an unlocked bootloader.
I do not provide support for Magisk or modules. If you need help with Magisk, here is the Magisk General Support thread. For support specifically with Magisk v24+, see this thread.
Points of note:
The boot image is NOT the bootloader image. Do not confuse the two - YOU are expected to know the difference. Flashing the wrong image to bootloader could brick your device.
While the Magisk app is used for patching the boot image, the app and the patch are separate. This is what you should see in Magisk for functioning root:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
"Installed" shows the version of patch in the boot image. If this says N/A, you do not have root access - the boot image is not patched, or you have a problem with Magisk.
"App" simply shows the version of the app itself.
If you do not have a patched master boot image, you will need to download the factory zip if you haven't already, extract the system update inside it, then patch boot.img.
If you prefer updating with the factory image, you can also extract and manually patch the boot image if desired.
Some Magisk modules, especially those that modify read only partitions like /system, may cause a boot loop after updating. As a general rule, disable these modules before updating. You are responsible for knowing what you have installed, and what modules to disable.
Credits:
Thanks to @badabing2003 , @pndwal , @Displax , @Az Biker , @ipdev , @kdrag0n , @Didgeridoohan , and last but not least, @topjohnwu for all their hard work!

---

no good on verizon 3a. however if you can figure out how to exploit DSU, when trying to load a custom ROM image, it corrupts vbmeta.

---

also if you check out my threads, there's a variety of other things I managed to dig up that could assist in unlocking a verizon variant, like that i mentioned above.

---

I also have a Verizon Pixel 3 with AT&T service and just want to tether my unlimited data.Is there a way to do it without root and unlocked bootloader.

---

AtrixHDMan said:
I also have a Verizon Pixel 3 with AT&T service and just want to tether my unlimited data.Is there a way to do it without root and unlocked bootloader.
Click to expand...
Click to collapse
Share a mobile connection by tethering or hotspot on Pixel - Pixel Phone Help
You can use your phone’s mobile data to connect another phone, tablet, or computer to the internet. Sharing a connection this way is called tethering or using a hotspot.
support.google.com

---

dcarvil said:
Share a mobile connection by tethering or hotspot on Pixel - Pixel Phone Help
You can use your phone’s mobile data to connect another phone, tablet, or computer to the internet. Sharing a connection this way is called tethering or using a hotspot.
support.google.com
Click to expand...
Click to collapse
I mean without them knowing it.I don't have tethering on my plan.

---

This only works if you're able to unlock your bootloader, obviously. We should all be well aware by now that certain carrier-specific devices prevent doing so, and there is no workaround or fix.

---

this doesnt work for me my patch file for magisk just makes it so that my touch screen is unresponsive at boot is there any other method for rooting my pixel 3?

---

thanks for shareing. when i got the last step on root. i had a Failed . (remote: Failed to write to partition Not Found). how can i fix it . sincerely.

---

hudsonchris12 said:
this doesnt work for me my patch file for magisk just makes it so that my touch screen is unresponsive at boot is there any other method for rooting my pixel 3?
Click to expand...
Click to collapse
Well I figured it out I followed a tutorial on YouTube that I can't actually find now but as far as I can recall the only difference between that one and this one was that the other guy had me use the Android flash tool to reflash a stock rom with the disable verity and disable verification boxes checked. doesn't seem like much but everything worked flawlessly afterwards. Maybe this will help someone else

---

This works perfect on my Pixel 3a XL as well. Thanks for sharing. Would be great if you can share how we can keep getting the monthly OS update after the phone is rooted.

---

works for me, thanks!

---

daviddooyyyyy said:
thanks for shareing. when i got the last step on root. i had a Failed . (remote: Failed to write to partition Not Found). how can i fix it . sincerely.
Click to expand...
Click to collapse
Make sure you're using the latest Platform Tools.
jackhu said:
This works perfect on my Pixel 3a XL as well. Thanks for sharing. Would be great if you can share how we can keep getting the monthly OS update after the phone is rooted.
Click to expand...
Click to collapse
This has nothing to do with root and everything to do with Google's existing strategy of supporting devices for 3 years. The Pixel 3 / 3XL were sunsetted with the last update in October 2021 and will no longer receive updates. The 3a / 3a XL will meet the same fate in May, as will the 4 / 4XL in October of this year.

---

Hello, I am currently on the January patch (AKA the last patch) (build SP1A.210812.016.A2), and I installed magisk using the latest canary build (23017) of Magisk. However, after doing "fastboot flash boot [path to file]" (without ""), the phone took spent quite a bit in the booting screen (G logo with bar underneath) and I backed out by flashing the stock boot image back (so I'm back in the unrooted state). How long is it considered "normal" when my phone boots after flashing magisk? If my English looks weird, sorry. I'm not native
PS: I've confirmed that I am using the latest version of platform-tools.
adb version
Android Debug Bridge version 1.0.41
Version 31.0.3-7562133
Installed as C:\My_space\adb\platform-tools\adb.exe
the flashing completed without errors:
fastboot flash boot C:\My_space\magiskFLASH\magisk_patched-23017_Jm013.img
Sending 'boot_a' (65536 KB) OKAY [ 1.682s]
Writing 'boot_a' OKAY [ 0.319s]
Finished. Total time: 2.481s
I've also verified the SHA-256 checksum of the download, and it matched without errors.
Thank you!

---

Question do I still use the factory image provided? Isn't there a more updated version which is the last?

---

Lomarnut said:
Question do I still use the factory image provided? Isn't there a more updated version which is the last?
Click to expand...
Click to collapse
Yes, I believe that you use updated method tho, or at least an updated TWRP.

---

rocketrazr1999 said:
Yes, I believe that you use updated method tho, or at least an updated TWRP.
Click to expand...
Click to collapse
do you know where updated method is. I'm very cautious about rooting because i've bricked at least 3 devices years ago

---

Deleted

---

Lomarnut said:
do you know where updated method is. I'm very cautious about rooting because i've bricked at least 3 devices years ago
Click to expand...
Click to collapse
Yes, THIS thread

---

rocketrazr1999 said:
Yes, THIS thread
Click to expand...
Click to collapse
so this method still works if I'm on jan image?