Hi all,
I bought this smartphone less than an year ago (January 2021) and, few days ago some sensors (barometer, compass, light sensor and proximity sensor) and the IR light suddenly stopped working. I still haven't opened it and got just some water in the bathroom sink... someone else had this kind of issue with this phone?
Thank you
so, i found this replace part: https://www.aliexpress.com/item/100...1e-0&pdp_ext_f={"sku_id":"12000022260273507"}
There's the barometer and the IR light and the flashlight, but it says nothing about the compass and the other sensors... i still haven't found anything about the other sensors, and i have no idea which part they are on.
Any ideas?
Thank you
Related
Hello everyone, din anyone else experienced problems with the light and the proximity sensor? On my SGS2, after few minutes of intense usage (usually after surfing on net via Wi-Fi, when phone gets hotter) the above sensors get stuck.
More precise, using a Sensor Tester, the light sensor shows either 0, either 16000, whilst the proximity sensor doesn't update values at all (stays at 0) when putting the hand near (or on it) and taking it away.
Again, anyone else experienced? Might be a faulty unit or is it a general behaviour?
Thanks!
Bogdan M.
I have the same problem but with the proximity sensor only
I sent it to warranty, next week I will see the resolution. Hopefully they'll replace it as faulty.
cheers.
Same Here
Sames Here, went back to warranty still waiting the answer
Ya me also facing the same proximity sensor issue from the last few days. the sensor is not working during a call. It started after I updated a game (diversion) and the facebook app from the android market. god knows what is the reason. Tried DHD proximity Recalibration yesterday. it says Kernel not found "- ps_kadc not found.
I will try to reinstall all the firmwares using kies today and see if the problem get solved. will let you guys know
Hi,
My gx2 was running cm10 and everything was working fine up until recently when my lcd screen broke.
So I ordered a new one and replaced the broken one, the repair has gone well , also the screen was good. Except there was a problem with the proximity sensor, when i tried to make a call the screen would go black and not switch on again, the only thing I could do was to take out the battery.
So I thought maybe I damaged the proximity sensor somehow while replacing the screen, so I bought a new sensor. The same Problem.
So I thought maybe it was firmware related even though I did not change the firmware and before the screen broke everything was working fine.
I flashed a stock rom, again everything went well , phone was working except the same problem with the proximity sensor.
Anyone know what that could be? Could I have damaged the motherboard somehow, even if that is unlikely because I was always extra careful and patient.
zsajak said:
Hi,
My gx2 was running cm10 and everything was working fine up until recently when my lcd screen broke.
So I ordered a new one and replaced the broken one, the repair has gone well , also the screen was good. Except there was a problem with the proximity sensor, when i tried to make a call the screen would go black and not switch on again, the only thing I could do was to take out the battery.
So I thought maybe I damaged the proximity sensor somehow while replacing the screen, so I bought a new sensor. The same Problem.
So I thought maybe it was firmware related even though I did not change the firmware and before the screen broke everything was working fine.
I flashed a stock rom, again everything went well , phone was working except the same problem with the proximity sensor.
Anyone know what that could be? Could I have damaged the motherboard somehow, even if that is unlikely because I was always extra careful and patient.
Click to expand...
Click to collapse
1. You should check if the sensor is really damaged. You can use e.g. Android Sensors app from Play store.
2. If it is broken, then try to disable it in ROM settings. I think there is at least an option in phone/dialer settings.
Maybe that can help.
Good luck !
It_ler said:
1. You should check if the sensor is really damaged. You can use e.g. Android Sensors app from Play store.
2. If it is broken, then try to disable it in ROM settings. I think there is at least an option in phone/dialer settings.
Maybe that can help.
Good luck !
Click to expand...
Click to collapse
I know how to disable the sensor, when I disable it calling works, but I want the sensor working . The thing is I thought I damaged it while replacing the screen, so I bought a new sensor, but the problem is still there.
android sensor box shows me a value of 0,0
typing in *#0*# and then "sensors" : the screen is always green an the phone is vibrating PROXIMITY: 13
the phonetester app shows Proximity sensor :near
I just figured something out.
The proximity sensor works when I hold the phone against a light source, when i do the *#0*# test and hold it against the light, the screen turns to white and the sensor works as it should( when i hold my hand near it, screen switches green and phone vibrates) , but only as long as it is near the light source.
Could the sensor just not be calibrated correctly? Is there a way to calibrate it?
than you
I just put a new screen in my s2, and now my camera isn't working anymore.
When I disconnect the front camera everything works as it should, so I guess this is the problem.
I don't need the front camera so I happily leave it disconnected, but unfortunately the light sensor and proximity sensor are connected though the same connection. And I do need the sensors.
So what are my best options? Is there a way to solve this through the software?
Hi everyone,
I bought LG G5 seceral months ago. Few day ago Knock On suddenly was not working,
please help............
If the proximity sensor detects something nearby, the knock on and always on display wont work. Maybe the proximity sensor has broken.
Hi Everyone
Clarify me about something that is atrophying my mind. Does the proximity sensor exist on this equipment? What I want to say is this: when I am reading something on my cell phone, and when I'm not having any interaction with my cell phone (because I'm just reading), and how I have configured the settings to turn off the screen in 15 seconds. My question here is ... just because I'm in front of the mobile phone or just waving to the screen does not turn off (something I did in my Moto X 2014) why does it turn off? Should not it stay on because of the proximity sensor? I was using ROM Lineage 15.1 and I thought there was something wrong with this ROM in the proximity sensor, but I went back to the ROM stock and I noticed that I still have this problem. I was thinking that either this phone has no proximity sensor or it is simply broken. I bought this cell phone a week ago. Please help me solve this issue of the sensor.
Thank you
Regards :good: