There's early access to ProtonAOSP 12.1 if anyone is curious. Installed this morning and it is very nice. Huge fan of the theming capabilities. Of course, you need to be a patron of his, but IMHO it's worth it.
Hope this does not offend @kdrag0n, but thought all should know about this great work.
Anyone else try ProtonAOSP 12.1 out yet?
This is good news, how's the install process with no custom recovery? God all I want is custom recovery
You install one of two ways. Install through a browser which is recommended by developer or download and flash like the normal factory image. Also, there is a vanilla version and a Gapps version. No custom recovery needed. Once installed, gaining root was same process as we use on factory OS.
Disclaimer, device data will be wiped when installing OS and of course wiped a second time when rooting (disabling verity and verification).
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The light theming is pretty nice
edit: nvm
5G networks for all operators work on this Rom?
Hey OP, I wrote a small review of this ROM on reddit. I've been using ProtonAOSP on the Pixel 6 for about 5 days now and I can say that I quite like it.
I'm not too sure how the forums takes kindly to linking off site, but if a moderator feels this message should be removed I understand.
https://www.reddit.com/r/Pixel6/comments/r4ma3g
@VozerCozer @phaino00 hello sir.. Do I need to root my pixel 6 if i want to flash this protonaosp??
is there many customizations on that rom? i would love to know if we can remove totally the navigation bar if i install that rom? it really annoys me the ARROW BACK and the Navigation bar Line in the bottom of the Screen.. Hope it can be disappear on ProtonAosp...
Do I Really need to UNLOCK bootloader of my PIXEL 6???
cadenzar said:
Do I Really need to UNLOCK bootloader of my PIXEL 6???
Click to expand...
Click to collapse
cadenzar said:
@VozerCozer @phaino00 hello sir.. Do I need to root my pixel 6 if i want to flash this protonaosp??
is there many customizations on that rom? i would love to know if we can remove totally the navigation bar if i install that rom? it really annoys me the ARROW BACK and the Navigation bar Line in the bottom of the Screen.. Hope it can be disappear on ProtonAosp...
Click to expand...
Click to collapse
cadenzar said:
Do I Really need to UNLOCK bootloader of my PIXEL 6???
Click to expand...
Click to collapse
Yes, you need to unlock bootloader to install ProtonAOSP. Root is not needed. Concerning features, @VozerCozer's review gives a good overview.
phaino00 said:
Yes, you need to unlock bootloader to install ProtonAOSP. Root is not needed. Concerning features, @VozerCozer's review gives a good overview.
Click to expand...
Click to collapse
do we have a tutorial how to unlock bootloader?? i would like to install this rom .. I think its stable enough
cadenzar said:
do we have a tutorial how to unlock bootloader?? i would like to install this rom .. I think its stable enough
Click to expand...
Click to collapse
Google's instructions are the best. Here: https://developers.google.com/android/images
Two things. One, unlocking your bootloader wipes your data. Two, when you install ProtonAOSP, your device will be wiped again.
Even though these are for the Pixel 6 Pro, the steps are the same, it's a good source.
June 20, 2023 TQ3A.230605.010.A1 T-Mobile/MVNOs / June 13, 2023 TQ3A.230605.010 Global - Root Pixel 6 Pro [Raven]
Pixel 6 Pro [Raven] Updated May 13, 2023 Note that more than three users have said that 34.0.1 (even May 10, 2023's binary update of 34.0.1) did not work correctly for them. I recommend sticking with 33.0.3 (just below these quotes) Someone...
forum.xda-developers.com
and
[Pixel 6 Pro] Easy STEP BY STEP Unlock-Root-Update
Ready to Unlock, Root, and Update factory images on your Pixel 6 Pro? There are some really good guides by V0latyle here, and by roirraW "edor" ehT here which are great for veteran/regular users who are really familiar with adb/fastboot and the...
forum.xda-developers.com
Hope it helps.
phaino00 said:
Google's instructions are the best. Here: https://developers.google.com/android/images
Two things. One, unlocking your bootloader wipes your data. Two, when you install ProtonAOSP, your device will be wiped again.
Even though these are for the Pixel 6 Pro, the steps are the same, it's a good source.
June 20, 2023 TQ3A.230605.010.A1 T-Mobile/MVNOs / June 13, 2023 TQ3A.230605.010 Global - Root Pixel 6 Pro [Raven]
Pixel 6 Pro [Raven] Updated May 13, 2023 Note that more than three users have said that 34.0.1 (even May 10, 2023's binary update of 34.0.1) did not work correctly for them. I recommend sticking with 33.0.3 (just below these quotes) Someone...
forum.xda-developers.com
and
[Pixel 6 Pro] Easy STEP BY STEP Unlock-Root-Update
Ready to Unlock, Root, and Update factory images on your Pixel 6 Pro? There are some really good guides by V0latyle here, and by roirraW "edor" ehT here which are great for veteran/regular users who are really familiar with adb/fastboot and the...
forum.xda-developers.com
Hope it helps.
Click to expand...
Click to collapse
Thank you bro.. have you tried this ProtonAosp now?? can you show me some screenshots?? HOME and Lockscreen?? please thank you
cadenzar said:
Thank you bro.. have you tried this ProtonAosp now?? can you show me some screenshots?? HOME and Lockscreen?? please thank you
Click to expand...
Click to collapse
No problem. I'm not using Proton now. Flashed back to stock so I could install @eng.stk blu_spark kernel last night. IMHO, one of the best kernels.
Given that, the ROM is very stable.
phaino00 said:
No problem. I'm not using Proton now. Flashed back to stock so I could install @eng.stk blu_spark kernel last night. IMHO, one of the best kernels.
Given that, the ROM is very stable.
Click to expand...
Click to collapse
hows that kernel you recently flashed?? why you switch kerneL ?? proton is not enough?? does proton has the ability to remove the Bottom navigation bar IcoN?? it really annoys me..
What are PRO's of the KERNEL you recently FLASHED to your P6?
cadenzar said:
hows that kernel you recently flashed?? why you switch kerneL ?? proton is not enough?? does proton has the ability to remove the Bottom navigation bar IcoN?? it really annoys me..
What are PRO's of the KERNEL you recently FLASHED to your P6?
Click to expand...
Click to collapse
Too early to say.
To open up the ability to tweak some things to squeeze better battery life.
ProtonAOSP is different.
Cannot recall if you can remove the bottom navigation bar, but you do have the ability to select 2 button, 3 button or gesture navigation.
Been using blu_spark on 3 or 4 devices over the last 5+ years.
phaino00 said:
Too early to say.
To open up the ability to tweak some things to squeeze better battery life.
ProtonAOSP is different.
Cannot recall if you can remove the bottom navigation bar, but you do have the ability to select 2 button, 3 button or gesture navigation.
Been using blu_spark on 3 or 4 devices over the last 5+ years.
Click to expand...
Click to collapse
ok2./. I found the blu spark on telegram.. it has PIXEL 6 now.. as initial release
please give fedback after few days
phaino00 said:
Too early to say.
To open up the ability to tweak some things to squeeze better battery life.
ProtonAOSP is different.
Cannot recall if you can remove the bottom navigation bar, but you do have the ability to select 2 button, 3 button or gesture navigation.
Been using blu_spark on 3 or 4 devices over the last 5+ years.
Click to expand...
Click to collapse
Bro I have a private message
Related
Welcome everyone!
This thread has been created to help every one who need information or help regarding this device. Not only Noobs, but everyone is free to post questions and also give answers to those questions.
Please post only questions related to this device only.
Guys Huawei is stopping issuing of Bootloader codes from 24-05-2018 for newer devices and after 60days more for all the devices.
Source :https://emui.huawei.com/en/unlock_detail
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Edit 24-05-2018(16:47 IST): Currently website page is live and codes are being generated go grab them if you need .
Currently have an aging Axon 7 which is looking like will never get Oreo. I was looking to get a new phone in the next few months but I really dislike the rear fingerprint sensor. So the View 10 looks pretty good, but I had a few [basic] questions
1) Has the Android Auto issue been fixed?
2) Can you replace the stock launcher with Nova?
Hey there
I'm having second thoughts too, because of the finger print sensor. Maybe wait for the Xiaomi Mi7, which will probably have the fingerprint scanner under on the screen (!!).
As for your questions:
1. Don't know what you're talking about
2. You can install the Nova Launcher on every Android Device!
georgs_town said:
Hey there
................
2. You can install the Nova Launcher on every Android Device!
Click to expand...
Click to collapse
He is taking about inbuilt EMUI power manger is killing other launchers and reverting to default settings in latest EMUI version. Its not honoring user preferences.
Hi, i wanna change my smartphone (oneplus 3). Do you think the honour 10 will be better then the OP3 ?
i mean the h10 has a modern design and a 24mp cam, but i dont know, what do you guys think?
DerSky1 said:
Hi, i wanna change my smartphone (oneplus 3). Do you think the honour 10 will be better then the OP3 ?
i mean the h10 has a modern design and a 24mp cam, but i dont know, what do you guys think?
Click to expand...
Click to collapse
Honor 10 is definitely more powerful than OP3/3T and equal to S8 /S8+
Is the memory ufs or emmc?
Dani90! said:
Is the memory ufs or emmc?
Click to expand...
Click to collapse
I've just run Androbench on mine, and have a sequential read speed of 752MB/s, which I believe means it's UFS 2.1?
Hello,
I have an isseu, the content of the message is hidden in thr notifications on block screen. I've tried to un-hide them searching the right voice on the system menù but finally i didnt fix this annoying issue. Can you please hekp me? Tnx
anyone already unlocked bootloader and tried to install some lineage/RR treble image? any issues on our phone? can we flash just with ADB and stock Huawei recovery, are opengapps included and magisk can be flashed through magisk manager on stock recovery?
PeterMarkoff said:
anyone already unlocked bootloader and tried to install some lineage/RR treble image? any issues on our phone? can we flash just with ADB and stock Huawei recovery, are opengapps included and magisk can be flashed through magisk manager on stock recovery?
Click to expand...
Click to collapse
I dont think anyone has installed custom ROM yet. I been just less than a week it launched internationally.
And coming to unlocking currently unlocking page is down and we have to rely on mail communication or on DC Unlocker.
miststudent2011 said:
I dont think anyone has installed custom ROM yet. I been just less than a week it launched internationally.
And coming to unlocking currently unlocking page is down and we have to rely on mail communication or on DC Unlocker.
Click to expand...
Click to collapse
well by email it should take at best 2 days i think and if someone got it immediately at release they could get code already on Friday and try GSI, I just applied yesterday, so hopefully this week i will receive unlocking code, though not sure if i wanna be first to check for bugs even if it doesn't bootloop
Guys Huawei is stopping issuing of Bootloader codes from 24-05-2018 for newer devices and after 60days more for all the devices.
Source :https://emui.huawei.com/en/unlock_detail
Edit: Currently website page is live and codes are being generated go grab them if you need .
jokabbt said:
Hello,
I have an isseu, the content of the message is hidden in thr notifications on block screen. I've tried to un-hide them searching the right voice on the system menù but finally i didnt fix this annoying issue. Can you please hekp me? Tnx
Click to expand...
Click to collapse
Please, somebody have an idea?
Can you help me please?
---------- Post added at 04:42 PM ---------- Previous post was at 04:05 PM ----------
jokabbt said:
Hello,
I have an isseu, the content of the message is hidden in thr notifications on block screen. I've tried to un-hide them searching the right voice on the system menù but finally i didnt fix this annoying issue. Can you please hekp me? Tnx
Click to expand...
Click to collapse
jokabbt said:
Please, somebody have an idea?
Can you help me please?
Click to expand...
Click to collapse
Resolved, there is a toggle into the face unlock option.
Is it possible to remove the on screen buttons like the honor v10? Do they have the same function as with the button in honor v10?
Vikenzi said:
Is it possible to remove the on screen buttons like the honor v10? Do they have the same function as with the button in honor v10?
Click to expand...
Click to collapse
Yes you can remove on screen navigation bar. Just search nav in settings and you will get the option to do so.
still nobody brave to try GSI ROM or at least that Magisk image? i have unlocked bootloader already
if someone tell me how to backup system.img and ramdisk.img so i can return back in case of bootloop/brick i am willing to try if there is no other risk than just flashing stock back
Hey guys,
Anyone knows how to run integrated qr scanner when the phone is unlocked? On Honor 9 there is an icon when swipe down on homescreen but it is not on Honor 10. I found barcode scanner only on lock screen but from lock screen I cannot access gallery to scan from photo since the phone is locked. Thanks
doylik said:
Hey guys,
Anyone knows how to run integrated qr scanner when the phone is unlocked? On Honor 9 there is an icon when swipe down on homescreen but it is not on Honor 10. I found barcode scanner only on lock screen but from lock screen I cannot access gallery to scan from photo since the phone is locked. Thanks
Click to expand...
Click to collapse
1.Take the photo
2.Open image in default gallery app
3.click on 3dots (more)
4. you will have option scan qr code in more options if app detects qr code.
miststudent2011 said:
1.Take the photo
2.Open image in default gallery app
3.click on 3dots (more)
4. you will have option scan qr code in more options if app detects qr code.
Click to expand...
Click to collapse
Thanks. This helped. Do you also know how to open QR scanner to scan qr codes without taking picture first or running it from lock screen?
(7.1) Flyme7. Fingerprint infrared V3 For the Leeco X720 and X727 ( Updated on 9/5/2018 )
AKA: The newest version of Flyme Original Chinese Name : 7to-X720.flyme7.指纹红外V3.zip
Developer: Cold and Ruthless
Original Link: http://rom.7to.cn/romdetail/1030273
Link: https://mega.nz/#F!xYJgXYxK
Key: !QNUTt-aMXA-Kvl39hOMp9A
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Flyme:
LeTV pro3 transplant Flyme7.8.21R V3
Redesigned interface, better overall experience
Advanced settings root card brush package
Optimized sound
Author: Cold ruthless
Release Date: 2018-09-04
Android version: 7.1.x
UI type: Flyme ROM
Size: 1270.00MB
Experience the new interface, with advanced settings, high speed, theming options, and excellent call and sound quality, all are hallmarks of the Meizu Official Experience
Applicable models: LeEco LEX720, LEX727
Optimization of the optimized
volume of the bottom package update sound.
Temperature control based on port from: Charm Blue Note 6 Build
Double Wipe> reboot to Recovery, if you have an error you may need to format storage
The first boot is very slow, please wait for the Meizu official latest experience version transplant
Past Bluetooth issue resolved.
Optimization scheduling
New interface new experience, advanced settings and optimization
Installation Notes:
First Boot may be slow, so if it takes a while for the first system boot, the solution is just to wait longer.
Flyme Account http://forum.flymeos.com/
Create an Official Flyme account if you want to gain access to tons of addons.
Meizu is Port friendly and Flyme Account Provides:
Forum advice
Plugins,
Apps,
3rd party themes etc.
Download Flyme 7 Launcher, Stock Wallpapers, and Apps (Flyme 7 stock APK)
https://www.androidsage.com/2018/05/15/download-flyme-7-launcher-stock-wallpapers-apps-apk/
As always, flash anything under your own discretion
Root
This Rom comes with Magisk root, You can easily flash Magisk 17.1 overtop after setting up the system and then rebooting to recovery.
Gapps: I am using BeansGapps-Mini-7.1.x-20170725.zip
Helpful files:
https://mega.nz/#F!JMYSSCLQ
Key: !xgQFTB69PE-hL8RTUbpUIw
Firmware
https://mega.nz/#F!oAZ3yC4b!
Key: MDwbHXNTRdrpgMvQ42yviw
If you have safetynet issues, follow the steps below
Extract the boot.img file from the rom, and placed the boot image into storage.
Open Magisk and use install to Patch Magisk to the boot.img.
Reboot to recovery, install the patched boot.img to boot
Flash addonsu-15.1-arm-signed.zip, and then reflash Magisk again, from storage then use advanced options to clear cache, and then reboot to system.
With these steps you will always Pass Safetynet and be playstore certified
https://forum.xda-developers.com/showpost.php?p=77367331&postcount=4790
Build Prop Recommendations
After the installation and initial testing period,. you may decide to continuing using Flyme for a while:
If so you can further optimise the ROM with these build prop and edits posted below.
First backup your existing buildprop
* ro.product.locale.language = en ( or your language)
* ro.product.locale.region = IN or your country
* persist.sys.timezone = your country ( see proper entry here: https://gist.github.com/arpit/1035596)
* persist.sys.meizu.region =
or use persist.sys.oem.region= your country google correct acronym for your country
Reserved for future hints
Thanks I will try and feedback
i get error code 3 when i try to flash
rob_z11 said:
i get error code 3 when i try to flash
Click to expand...
Click to collapse
Me Too!
Yes, I tried it and the same thing happened to me, it must be a corrupt download because people are giving the release a 8.3/10. I found a slightly older but highly rated rogue pig version. ( see same link above)
I installed it successfully and must say, it's actually extremely good.
Corruption
The original newer file is probably just corrupted so I am going to try redownloading it. Until then, check out the other version that I placed in the same megadrive folder see the link above. Yes, it's a little older but its actually awesome!
I just attempted to find the newer rom by cold ruthless on the BBS website, has he been banned. I had a bookmark saved and when I click I get this message " Authors are banned or deleted automatically blocked" Not sure if its the same person or not, if this next download is corrupt. I would still recommend flyme_LEX720_rogue_6.8.3.17R-beta, I am testing it right now and like it alot.
Does Android Pay work with this ROM?
I flashed the ROM after the boot I face a black screen and a bar with Chinese written and I can't do anything only control the volume...I only flash the ROM with wipe the data,system and delvic cach
3llawi said:
I flashed the ROM after the boot I face a black screen and a bar with Chinese written and I can't do anything only control the volume...I only flash the ROM with wipe the data,system and delvic cach
Click to expand...
Click to collapse
No issue like this. Everything worked. It booted fine. You may have to use the recovery version from earlier in the month of Jan.
Everything worked for me except volte which is no big deal. Really impressive build. Thanks for downloading @tsongming..
3llawi said:
I flashed the ROM after the boot I face a black screen and a bar with Chinese written and I can't do anything only control the volume...I only flash the ROM with wipe the data,system and delvic cach
Click to expand...
Click to collapse
It looks like what happened to me when going from an Oreo rom to Nougat, you have to format data not only wipe data. Format data, write "yes" and then install the rom. Always have a backup of your data before.
flyme is one of the best system , the official one is good but it's old , be sure to have eui firmware before flashing flyme .
rob_z11 said:
No issue like this. Everything worked. It booted fine. You may have to use the recovery version from earlier in the month of Jan.
Everything worked for me except volte which is no big deal. Really impressive build. Thanks for downloading @tsongming..
Click to expand...
Click to collapse
Please can you put the link of old recovery version
rob_z11 said:
No issue like this. Everything worked. It booted fine. You may have to use the recovery version from earlier in the month of Jan.
Everything worked for me except volte which is no big deal. Really impressive build. Thanks for downloading @tsongming..
Click to expand...
Click to collapse
Did you format internal storage?
3llawi said:
Did you format internal storage?
Click to expand...
Click to collapse
No because I have always been on miui10
can some1 link me the gapps?
collisiion said:
can some1 link me the gapps?
Click to expand...
Click to collapse
Look at the post #1
Thanks to troubleshooting from @ rob_z11, I plan to post a working version of the Cold Ruthless file late tonight EST.
andrew2401 said:
Does Android Pay work with this ROM?
Click to expand...
Click to collapse
I believe so, though I haven't tried it yet. I will let you know late tonight
tsongming said:
I believe so, though I haven't tried it yet. I will let you know late tonight
Click to expand...
Click to collapse
Okay thank you how's the battery so far?; I've owned Meizu phones and there is was always good for battery optimization
tsongming said:
Thanks to troubleshooting from @ rob_z11, I plan to post a working version of the Cold Ruthless file late tonight EST.
Click to expand...
Click to collapse
Ok, this is what I have found. Your original latest flyme seems to be working ok. Here is what I have done. Using RAR apk, I unzipped it, and it complained about one apk in mizu-apk folder, and I ended up removing that folder completely, and zipped the ROM again. It flashed without any issue, but I can't seem to get Data to turn-on. It turns on briefly during the boot, but it goes away. I think if I compare the build.prop from older version with newer version, I may be able to find the fix.
andrew2401 said:
Okay thank you how's the battery so far?; I've owned Meizu phones and there is was always good for battery optimization
Click to expand...
Click to collapse
Extremely good, at the moment my phone has no OS at all..
I only glanced at battery life briefly yesterday with Gsam battery tool. Plus, I installed BlackScreen 5.3 r2 which worked fine, I would rather wait for a real answer. Otherwise it would just be a guess.
[ROM][SM-T580/5][UNOFFICIAL][PixelExperience][9.0][64-Bit] -> 20190916 (DISCONTINUED)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
PixelExperience
DISCONTINUED
Pls find the last downloads here ..
https://androidfilehost.com/?w=files&flid=289289
https://androidfilehost.com/?w=files&flid=289291
Pixel Experience is an AOSP based ROM, with Google apps included and all Pixel goodies (launcher, wallpapers, icons, fonts, bootanimation)
Pixel Experience - Plus
PixelExperience_Plus_gtaxlwifi-9.0-20190916-1148-UNOFFICIAL.zip
PixelExperience_Plus_gtaxllte-9.0-20190916-1409-UNOFFICIAL.zip
Pixel Experience
PixelExperience_gtaxlwifi-9.0-20190206-1143-UNOFFICIAL.zip
PixelExperience_gtaxllte-9.0-20190206-1435-UNOFFICIAL.zip
Installation:
1. Boot into TWRP
2. Wipe system, cache, dalvik and data !
3. Install ROM.zip
4. install Magisk.zip
5. Reboot into system
- This ROM does include Gapps already !
TWRP:
Based on OMNI sources ..
twrp-3.3.1-1-gtaxlwifi-OMNI6 / twrp-3.3.1-1-gtaxllte-OMNI6
https://drive.google.com/drive/folders/1H3-CU3p-mGf0b_oQ69wirVcgd-okF-ps
SOURCES:
I have added manifest as well .. to be able to build future builds yourself.
https://github.com/followmsi/manifests/tree/gtaxl-pixel-pie
https://github.com/followmsi/android_device_samsung_gtaxlwifi/tree/pixel-pie_64-bsp
https://github.com/followmsi/android_device_samsung_gtaxllte/tree/los-16.0_64-bsp
Thanks to @cschsz for all the kernel security updates !
Big thanks to @Valera1978 for all his work !
Enjoy
Another Android "flavor" for 580/585 .. Pixel Experience
No worries .. except for RR Pie there are no more additional ROMs in the pipeline
Cheers
OMG. COOL. I was thinking of making one myself, but you already made one. Saves me the trouble ?
Wanting to try this out, but not sure about two things. In the Drive folder, there is a Pie/Oreo kernel as well as a different version of twrp from what I'm using. Is it necessary to install both of these along with this rom? Thanks
I know this could seem unnecessary but please put each type of rom into different folders. It is starting to become a mess to find the right rom.
Hmmm, this rom is reporting as a Xiaomi MI6 phone. Technically not a big deal, but figured I point it out. Also, switching to the front facing camera causing the camera app to crash. Going to the app section in setting and clearing data for the camera app fixes the crashing, but will popup again if you switch to the front facing camera again.
This one could be me, but flashing Magisk causing two apps to show up. One more thing, the app icons don't "look" right, they seem to look round but are cut off at the edges.
rev79 said:
Wanting to try this out, but not sure about two things. In the Drive folder, there is a Pie/Oreo kernel as well as a different version of twrp from what I'm using. Is it necessary to install both of these along with this rom? Thanks
Click to expand...
Click to collapse
If your current twrp works fine you do not need anything else ..
Just follow the instructions ..
Installation:
1. Boot into TWRP
2. Wipe system, cache, dalvik and data !
3. Install ROM.zip
4. install Magisk.zip
5. Reboot into system
Cheers
-Maverick- said:
Hmmm, this rom is reporting as a Xiaomi MI6 phone. Technically not a big deal, but figured I point it out. Also, switching to the front facing camera causing the camera app to crash. Going to the app section in setting and clearing data for the camera app fixes the crashing, but will popup again if you switch to the front facing camera again.
This one could be me, but flashing Magisk causing two apps to show up. One more thing, the app icons don't "look" right, they seem to look round but are cut off at the edges.
Click to expand...
Click to collapse
Fingerprint only .. As xiaomi sagit ..to bypass safety net checks with magisk.
Stock Samsung fingerprint does not work on 64-bit.
Which camera app ?
Normally snap camera should have been installed .. Need to check.
paulo boë said:
OMG. COOL. I was thinking of making one myself, but you already made one. Saves me the trouble [emoji6]
Click to expand...
Click to collapse
You are welcome ..
Unlike to the upcoming RR Pie there are no regular builds planned for Pixel Experience.
If you plan building regular Pixel Experience ROMs .. Pls go ahead.
Cheers
followmsi said:
Fingerprint only .. As xiaomi sagit ..to bypass safety net checks with magisk.
Stock Samsung fingerprint does not work on 64-bit.
Which camera app ?
Normally snap camera should have been installed .. Need to check.
Click to expand...
Click to collapse
Just tried this rom. Camera works fine, using Open Camera app. I enabled the setting to use camera2 api in the app's settings first page. I started enabling it on all roms after noticing that it helps the flash to be in sync with the shutter on lineage 16 or crdroid rom. So maybe this setting helps the performance of camera in other ways also.
The gps was choppy at first, as usual for me (using T585) on pie roms. but after some idle time it stopped freezing the device and started getting a fix. So I hope the choppiness of the gps on pie roms is a one time thing after installing a new rom.
followmsi said:
Fingerprint only .. As xiaomi sagit ..to bypass safety net checks with magisk.
Stock Samsung fingerprint does not work on 64-bit.
Which camera app ?
Normally snap camera should have been installed .. Need to check.
Click to expand...
Click to collapse
The one that comes with the rom. Back camera works fine, switching to the front camera causing the camera app to crash.
Great rom !! Thanks followmsi as usual for your hard work
Great job!
It's possible to wake up the device with the Home button and not only with the Power button?
AOSP Extended
followmsi said:
Another Android "flavor" for 580/585 .. Pixel Experience
No worries .. except for RR Pie there are no more additional ROMs in the pipeline
Cheers
Click to expand...
Click to collapse
How about AEX
ginopinotto said:
Great job!
It's possible to wake up the device with the Home button and not only with the Power button?
Click to expand...
Click to collapse
Home button in next ROM ..
Greenchain said:
How about AEX
Click to expand...
Click to collapse
Just build yourself
Thanks for adding Home button to wake up the devices in the next build.
Cast screen doesn't work in this build.
There will be a future update of this ROM? At least add the Home button to wake up the devices
Thanks
ginopinotto said:
There will be a future update of this ROM? At least add the Home button to wake up the devices
Thanks
Click to expand...
Click to collapse
Yes .. at least one more build to fix home button.
But next month only .. including Feb security updates.
Cheers
Pixel Experience .. the final ROM
PixelExperience_gtaxlwifi-9.0-20190206-1143-UNOFFICIAL.zip
PixelExperience_gtaxllte-9.0-20190206-1435-UNOFFICIAL.zip
Changes:
- Google security updates -> February 2019
- Changed overlays to (hopefully) fix wake up with HomeButton -> needs testing
Pls go ahead and start building regular PE builds for SM-T580/585.
I just don't have the time to make regular PE builds too.
It's still a nice option for our devices.
Enjoy
Hello everyone!
I have repacked @phhusson 's Quack Phh-Treble GSI to a flashable TAR file that we can flash on the S20 devices.
For more info about Quack Phh-Treble GSI check this thread here - https://forum.xda-developers.com/pr...velopment/aosp-10-0-quack-phh-treble-t3992559
You must have a device with an unlockable bootloader
What doesn't work?
Auto brightness
Fingerprint enrolment works 50% on first boot and randomly works when screen is off
Reports about MTP not working - could be a driver issue
Proximity Sensor
Screen timeout is always 15s
NFC
For a full list of issues, check the official github - https://github.com/phhusson/treble_experimentations/issues
What works?
Everything else!
Found something else that doesn't work? Let me know and I'll update the thread.
What do these repacks include
The official release of Quack Phh-Treble GSI with Gapps (system-quack-arm64-ab-gapps.img)
Cross Device Lineage Recovery Flashable - Phh SYSTEM image only!
Downloads
Download Quack_Phh-Treble_GSI_v217.zip from:
Mega - https://mega.nz/file/dowXRSYT#LaJSGNelVxPcerNkyN2QQVIYKos4Eea_dH10PId2JsM
AndroidFileHost - https://www.androidfilehost.com/?fid=4349826312261820046
How to install
If you are not rooted - follow Jesec's guide on how to root your device. Make sure you boot into setup at least once! - https://forum.xda-developers.com/galaxy-s20/how-to/howto-root-s20-series-upgrade-firmware-t4079353
If you do not have Lineage Recovery - again, follow Jesec's guide on how to install Lineage Recovery - https://forum.xda-developers.com/ga...recovery-lineage-recovery-s20-series-t4084977
Enter Recovery Mode and factory reset your device
Copy Quack Phh-Treble GSI vxxx.zip onto your external SD
In Lineage Recovery, choose Apply update
Choose Apply from disk
Choose Quack_Phh-Treble_GSI_vxxx.zip
Once installation is complete, reboot to system
Previous Versions
v216
Mega - https://mega.nz/file/g5RUHCID#1LqTrVnRotQwb5vLQQ0TGDN4vtgx4N4aHJza3yZkvU0
AndroidFileHost - https://www.androidfilehost.com/?fid=4349826312261800816
Screenshots
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Credits
@phhusson for the Quack Phh-Treble
@jesec for root guids, Lineage Recovery, binary-update and help with creating the flashable zip
Have fun!!
Thanks, like to see AOSP in S20+
toystory said:
Thanks, like to see AOSP in S20+
Click to expand...
Click to collapse
This is for all S20 models, including S20+
Is this only for the global models or will this work on Sprint
AndroidBeginNinja said:
Is this only for the global models or will this work on Sprint
Click to expand...
Click to collapse
If you can unlock your device' bootloader and root it, it will work. Otherwise, no
This isn't for snapdragons in the US. Tired of this crap from Samsung and others
i can get gsi to install using dsu but when u press restart it hangs on splash screen a min or two then reboots normally.. so cant even boot gsi without root unfortunately on locked devices
WarEagleUS said:
This isn't for snapdragons in the US. Tired of this crap from Samsung and others
Click to expand...
Click to collapse
lol...
is the selinux set to permissive? can I only flash the kernel?
Unbranded Samsung 20 Pro
firefds said:
This is for all S20 models, including S20+
Click to expand...
Click to collapse
ah. but, I have a weird s20. The model number says it's an S20 Pro (build number is: m_l805_pmz_a6601_welcome_en_yl_128a16_v04 and a CSC of zmu1a0h5 - also note, i'm not sure if that's l805 or 1805 and yl or y1 - dunno). I got the thing on wish (ya, ya...bad idea, i know, but it's too late now). I'm not sure what ROM to get, if any. I'm hoping a friendly guru can help guide me. The phone says i'm using over 100gigs of internal storage, but...i don't have near enough apps to fill up that much. I installed one 26 meg app, yet the phone is claiming it took up 3gigs of space. Whaaaat?
Is there something I'm missing? I mean, cell phones confuse me sure, but (as a programmer) I think I understand the basics and this just baffles me. Will this ROM work on this phone? Can I change the CSC, cuz some things come up with chinese or korean lettering, which, of course, I can't read so that's annoying)
Sincerly
Jarett
JamRoll said:
ah. but, I have a weird s20. The model number says it's an S20 Pro (build number is: m_l805_pmz_a6601_welcome_en_yl_128a16_v04 and a CSC of zmu1a0h5 - also note, i'm not sure if that's l805 or 1805 and yl or y1 - dunno). I got the thing on wish (ya, ya...bad idea, i know, but it's too late now). I'm not sure what ROM to get, if any. I'm hoping a friendly guru can help guide me. The phone says i'm using over 100gigs of internal storage, but...i don't have near enough apps to fill up that much. I installed one 26 meg app, yet the phone is claiming it took up 3gigs of space. Whaaaat?
Is there something I'm missing? I mean, cell phones confuse me sure, but (as a programmer) I think I understand the basics and this just baffles me. Will this ROM work on this phone? Can I change the CSC, cuz some things come up with chinese or korean lettering, which, of course, I can't read so that's annoying)
Sincerly
Jarett
Click to expand...
Click to collapse
It's definitely a bad clone, Samsung S20 Pro doesn't even exist... I'd ask for a refund.
I'd love to see advancements on this in the future! Now that American models can unlock im sure lots of people would like to try stock Android.
does 120hz work on this?
ChongoDroid said:
I'd love to see advancements on this in the future! Now that American models can unlock im sure lots of people would like to try stock Android.
does 120hz work on this?
Click to expand...
Click to collapse
American Snapdragon models can be unlocked?
PieceofSlice said:
American Snapdragon models can be unlocked?
Click to expand...
Click to collapse
Yes
PieceofSlice said:
American Snapdragon models can be unlocked?
Click to expand...
Click to collapse
Yep, I just compiled a build of lineage os for the s20, I was gonna see if anyone wanted it.
ChongoDroid said:
Yep, I just compiled a build of lineage os for the s20, I was gonna see if anyone wanted it.
Click to expand...
Click to collapse
I'll give it a try on my 986U1 if you think it will work.
Misterxtc said:
I'll give it a try on my 986U1 if you think it will work.
Click to expand...
Click to collapse
Unfortunately x1q only for now, I can build for ultra and + in the future, just won't be able to test as I don't have them
I am on 9810 if testers needed
ChongoDroid said:
Unfortunately x1q only for now, I can build for ultra and + in the future, just won't be able to test as I don't have them
Click to expand...
Click to collapse
I'll test if you build it. I haven't built anything in a couple of years so I'm way to rusty to try right now.
JamRoll said:
ah. but, I have a weird s20. The model number says it's an S20 Pro (build number is: m_l805_pmz_a6601_welcome_en_yl_128a16_v04 and a CSC of zmu1a0h5 - also note, i'm not sure if that's l805 or 1805 and yl or y1 - dunno). I got the thing on wish (ya, ya...bad idea, i know, but it's too late now). I'm not sure what ROM to get, if any. I'm hoping a friendly guru can help guide me. The phone says i'm using over 100gigs of internal storage, but...i don't have near enough apps to fill up that much. I installed one 26 meg app, yet the phone is claiming it took up 3gigs of space. Whaaaat?
Is there something I'm missing? I mean, cell phones confuse me sure, but (as a programmer) I think I understand the basics and this just baffles me. Will this ROM work on this phone? Can I change the CSC, cuz some things come up with chinese or korean lettering, which, of course, I can't read so that's annoying)
Sincerly
Jarett
Click to expand...
Click to collapse
Ummmm.....Please install a fake phone checker or something because there is no S20 Pro and 'welcome' is usually used in phones bought of fake stores.
Would you please send me screenshots of the settings app and other UI elements? I would like to tell if you've gotten yourself/your parents have gotten you a fake device.
Sent from my SM-G988B using XDA Labs
Please post your successsfull root, (Magisk) & Any successfull custom recoveries and or custom ROM's fully running on Google pixel 6 devices. Leggo developers!
The question is, why would you want a bloated rom with this great un-bloated device?
Pixels now days come with the best software available.
If you want to customize and root, use Magisk and custom themes.
Hopefully some developers will get these phones in their hands and start working on new ROMs, that's mainly what I'm waiting for to really start enjoying my P6 as well. A big one for me is to de-google the phone and go Lineage/Calyx/Graphene OS.
vandyman said:
The question is, why would you want a bloated rom with this great un-bloated device?
Pixels now days come with the best software available.
If you want to customize and root, use Magisk and custom themes.
Click to expand...
Click to collapse
If by un-bloated you mean lacking any useful options then sure. But personally I want more options, like the ability to assign custom actions to navbar buttons, to hide the statusbar clock without leaving a huge empty space behind, to have PROPER accent colors I can define via HEX code and many many more.
On the other hand an UNbloated device shouldn't come with Gmail, Youtube Music, Google TV, Tags or any other crap preinstalled either, most of which I can't uninstall but only disable.
I can't wait to see what devs unlock with new kernels
Might take a while since Tensor is an unknown, but this would be a great device for Lineage.
LLStarks said:
Might take a while since Tensor is an unknown, but this would be a great device for Lineage.
Click to expand...
Click to collapse
That's alright I expect to wait awhile. I'm excited either way
vandyman said:
The question is, why would you want a bloated rom with this great un-bloated device?
Pixels now days come with the best software available.
If you want to customize and root, use Magisk and custom themes.
Click to expand...
Click to collapse
"great un-bloated device"? Maybe as compared to adding even more bloat from the vendor and carrier, but these are VERY VERY far from bloated. They're disgustingly bloated. More g-spyware than anything I've ever seen.
So why would you want an **UN**-bloated build of AOSP? To get rid of the steaming truckload of dogsh**.
96carboard said:
"great un-bloated device"? Maybe as compared to adding even more bloat from the vendor and carrier, but these are VERY VERY far from bloated. They're disgustingly bloated. More g-spyware than anything I've ever seen.
So why would you want an **UN**-bloated build of AOSP? To get rid of the steaming truckload of dogsh**.
Click to expand...
Click to collapse
You can uninstall or freeze any app you want to. Easy peazy.
I just like having a clean OS with a few minor mods. Oh!, custom kernels are also helpful.
I guess you can call it OCD, after cleaning up people's PCs from all the crap that they installed with no clue on what it really does.
Some people just like installing crap on there phone for what...
Than they go from thread to thread to cry and ask for help because their device has problems.
vandyman said:
You can uninstall or freeze any app you want to. Easy peazy.
I just like having a clean OS with a few minor mods. Oh!, custom kernels are also helpful.
I guess you can call it OCD, after cleaning up people's PCs from all the crap that they installed with no clue on what it really does.
Some people just like installing crap on there phone for what...
Than they go from thread to thread to cry and ask for help because their device has problems.
Click to expand...
Click to collapse
No, you actually can't. Go ahead and try to disable play services and see where that gets you.
96carboard said:
No, you actually can't. Go ahead and try to disable play services and see where that gets you.
Click to expand...
Click to collapse
Google play is whole, different topic in its own.
Some people need it for different reasons than others.
Just like some people need Facebook Twitter, etc. For there life to continue on.
I do not need that kind of bloat ware in my life.
96carboard said:
No, you actually can't. Go ahead and try to disable play services and see where that gets you.
Click to expand...
Click to collapse
I've been using Android devices without Google Play Services by following this excellent guide on all my devices. I'm waiting for my Pixel 6 and will have a go. Not sure if it will work on Android 12, but will have go. In any case I'll be using Xprivacy Lua & AFwall+ for additional privacy.
[GUIDE] microG - Deodex - Signature Spoofing - Debloat Gapps!
microG I am no longer working on this, or updating any information here! This was created back in the day of Oreo. I've personally moved on and I'm presently using /e/ which you can see the info here and get the ROM for OP5T. /e/OS...
forum.xda-developers.com
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If you follow the aosp build guide you can build aosp pure for pixel 6 ...
Im currently trying to build a custom recovery for pixel 6 before i release pure aosp or any other aosp build.
If your wonder why the kernel says september its because i was using it for magisk root.
Please lmk if find a creation build that's successful for recovery please thanks and good luck to you mate. Enjoy your P6!
allenjthomsen said:
View attachment 5451057
If you follow the aosp build guide you can build aosp pure for pixel 6 ...
Im currently trying to build a custom recovery for pixel 6 before i release pure aosp or any other aosp build.
If your wonder why the kernel says september its because i was using it for magisk root.
Click to expand...
Click to collapse
Yes please keep us updated
With the latest update to the 37 firmware i currently have not been able to get a booting build working without gapps or gapps .
I get a build that boots but it reboots at random for both builds i am currently working to fix the issue and once i do i will be releasing both.
Shannonims restart loop? Set selinux permissive for now if you haven't already.
Proton AOSP early release
Just got my Pixel 6 today, can't wait for GrapheneOS been using it on my Pixel 4a forever. Looks like Pixel 6 support is underway.
gapps version is finally booting and i know why this error is there i need to swap from the current gapps im using to another one but i am closer to non bootlooping builds now since i fixed my issue in my source . i will have a non gapps version coming out sooner for those that dont want to use gapps it will not have spoofing at first i will add that later on.