Hi there.
I have a TV Box that says MXQ+S on the plastic box with an Amlogic S905L chipset inside. At least that was written on the Aliexpress seller page.
Since it has Android 9 and wireless connection tends to go crazy every now and then (doesn't see any network) I was wondering if there's a firmware update that could be applied to it?
This is what I get from the box:
Kernel version
3.14.29
Wed Jun 24 13:23:04 CEST 2020
Build
p281-userdebug 9 NHG47L 20200624 test-keys
Any chance to update this with Android 10 or a newer Android 9 build?
Thanks
Related
Hello all my name is Cosmin and i live in Romania and i have 2 brigadiers from the states.
For some reason one of them found the lollipop update last week when i connected it to the pc. I totally hate it and i want to go back to kitkat.
Is there any way to downgrade it to the previous version ? Thanks.
Android: 5.1.1
Software : 2.955VZ
Hardware ver. : 1010
BaseBand 2.955VZ
Kernel : 3.4.0-gdb659c7 [email protected] #1 Thu. Jan 28 2:07:01 JST 2016
Build Numer : LMY47V
Hope you can help me i really need it to go back the second phone is still on kitkat and working but no camera and flask (dive to deep with it) so i can you files from it or something.
Can i save the ROM from the other phone and just push it in to the good phone ? Thanks.
screen size 2560*1600
model number = Fengxiang vKB011B
android version 5.12
Baseband version Molly.wr8.w1449.md.wg.mp.v6.p13,2016/01/06 10:34
Kernal version 3.10.72+
[email protected]#1
wed jan 6 17:16:31 cst 2016
build number k960_vkb011b_20160105
I also did some research and found its a mediatek Mt6592T on a k960 board. besides that I dont know what base phone to select to install twrp.
I have gone to the twrp website and want to install 3.0.2-0 but it comes to a page where I have to select a phone brand.
My question is, which brand is compatible with an no name chinese tablet? thank you.
I also managed to root this with android root. just in case anyone else have the same table. thanks again if anyone can direct me to the right twrp exe for this device.
Dear friends,
I am trying to obtain boot.img to patch via Magisk and root my Samsung SM-J337A.
The problem I face is that after much research I'm still not sure if I found the compatible boot.img for my device.
Originally, the SOFTWARE INFORMATION for my phone is as follows:
*** SOFTWARE INFORMATION
Android version
8.0.0
Samsung Experience version
9.0
Baseband version
J337AUCU3ARJ1
Build number
R16NW.J337AUCU3ARJ1
I wrote it down, but not all of the SOFTWARE INFORMATION. Only the information shown above.
But after a few days my phone received an update.
After update this is the SOFTWARE INFORMATION:
*** SOFTWARE INFORMATION
Android version
8.0.0
Samsung Experience version
9.0
Baseband version
J337AUCU4ARL1
Kernel version
3.18.14-13465503-QB20918127
[email protected] #1
Tue Dec 4 18:55:55 KST 2018
Build number
R16NW.J337AUCU4ARL1
Security Enhancements for Android status
Enforcing
SEPF_SM-J337A_8.0.0_0007
Tue Dec 4 19:06:00 2018
Knox version
Knox 3.1
Knox API level 25
TIMA 4.0.0
Service Provider SW ver.
SAOMC_SM_J337A_ATT_ATT_OO_0033
42007dcd9bb4c579
ATT/ATT/ATT
Security software version
ASKS v1. 4.5 Release 180123
FIPS BORINGSSL v1.2
SMR Dec-2018 Release 1
Android security patch level
December 1, 2018
***
Perhaps I found the ROM for the original software. These are all the file names:
AP_J337AUCU3ARJ1_CL13465503_QB20325568_REV00_user_low_ship_meta.tar.rar
CP_J337AUCU3ARJ1_CP11051172_CL13465503_QB20325568_REV00_user_low_ship.tar.rar
BL_J337AUCU3ARJ1_CL13465503_QB20325568_REV00_user_low_ship.tar.rar
CSC_OMC_ATT_J337AATT3ARJ1_CL13465503_QB20325568_REV00_user_low_ship.tar.rar
COMBINATION_FAC_FA80_J337AUCU3ARI1_FACFAC_CL13704061_QB19717843_REV00_user_mid_noship.tar.rar
However, for the updated system I only find the combination file. Well, at least that is what I think I found. This is the file name:
COMBINATION_FAC_FA80_J337AUCU4ARK1_FACFAC_CL13704061_QB20833319_REV00_user_mid_noship.tar
I already extracted and patched the boot.img for this latest 4ARK1 combination file, using Magisk. But I'm not sure if it would be compatible.
Can you tell me please?
Id like to know more about this myself as well please pm me
Following
[Sm-j337p] [hunting boot.img] driving me crazy trying to get magisk, twrp soft bricked me 4 diff times
I've dug around for this phone too, and found two options for download, however they both require payment. (Easy firmware) after searching online, I found another, official, and free way that you can get the official firmware for the samsung devices through Samsung's smart switch application. The only problem is that the program will only download the rom if you have a available update on your sm-j337a. I'm up to date with the first android pie update on my sm-j337a. If your still waiting for a patch, I would:
Install smart switch both mobile and pc.
Set preferences to preload roms in pc version (download first, then choose to install)
Copy the rom from user 》 documents》 samsung
If this works, please share the rom. My phone is too updated to test it.
Intelectualoide said:
Dear friends,
I am trying to obtain boot.img to patch via Magisk and root my Samsung SM-J337A.
The problem I face is that after much research I'm still not sure if I found the compatible boot.img for my device.
Originally, the SOFTWARE INFORMATION for my phone is as follows:
*** SOFTWARE INFORMATION
Android version
8.0.0
Samsung Experience version
9.0
Baseband version
J337AUCU3ARJ1
Build number
R16NW.J337AUCU3ARJ1
I wrote it down, but not all of the SOFTWARE INFORMATION. Only the information shown above.
But after a few days my phone received an update.
After update this is the SOFTWARE INFORMATION:
*** SOFTWARE INFORMATION
Android version
8.0.0
Samsung Experience version
9.0
Baseband version
J337AUCU4ARL1
Kernel version
3.18.14-13465503-QB20918127
[email protected] #1
Tue Dec 4 18:55:55 KST 2018
Build number
R16NW.J337AUCU4ARL1
Security Enhancements for Android status
Enforcing
SEPF_SM-J337A_8.0.0_0007
Tue Dec 4 19:06:00 2018
Knox version
Knox 3.1
Knox API level 25
TIMA 4.0.0
Service Provider SW ver.
SAOMC_SM_J337A_ATT_ATT_OO_0033
42007dcd9bb4c579
ATT/ATT/ATT
Security software version
ASKS v1. 4.5 Release 180123
FIPS BORINGSSL v1.2
SMR Dec-2018 Release 1
Android security patch level
December 1, 2018
***
Perhaps I found the ROM for the original software. These are all the file names:
AP_J337AUCU3ARJ1_CL13465503_QB20325568_REV00_user_low_ship_meta.tar.rar
CP_J337AUCU3ARJ1_CP11051172_CL13465503_QB20325568_REV00_user_low_ship.tar.rar
BL_J337AUCU3ARJ1_CL13465503_QB20325568_REV00_user_low_ship.tar.rar
CSC_OMC_ATT_J337AATT3ARJ1_CL13465503_QB20325568_REV00_user_low_ship.tar.rar
COMBINATION_FAC_FA80_J337AUCU3ARI1_FACFAC_CL13704061_QB19717843_REV00_user_mid_noship.tar.rar
However, for the updated system I only find the combination file. Well, at least that is what I think I found. This is the file name:
COMBINATION_FAC_FA80_J337AUCU4ARK1_FACFAC_CL13704061_QB20833319_REV00_user_mid_noship.tar
I already extracted and patched the boot.img for this latest 4ARK1 combination file, using Magisk. But I'm not sure if it would be compatible.
Can you tell me please?
Click to expand...
Click to collapse
Hello this is an old post but hope it helps.
When you are looking for the boot.img that is compatible with your device you have all the right info just don't know how to read it.
The device is the J337A your after you updated Baseband is J337AUCU4ARL1. To know what bootloader Rev. you are on you count 4 spaces past the model number so J337A UCU4 you are on Rev. 4 so just download the appropriate software for that bootloader and extract the AP file with 7zip you find the boot.img in there.
hope this helps.
The Nubia Red Magic Mars Global Edition arrived with the November 1, 2018 Android security patch level. Current patch level is December 2018. There have been no new security patches since.
Current Red Magic Mars build and security patch levels (as of March 2019):
---Version: 1.08 (Android 9)
---Build number: NX619J_Z69_EN_WPJ0O_V1.08
---Android security patch level: December 5, 2018
Previous Global Builds:
---Version: 1.07 (Android 9)
---Build number: NX619J_ENCommon_V1.07
---Android security patch level: December 5, 2018
If you notice a change to your patch level, what Android security patch version are you on now?
(Note: this thread is designed to record when or if Nubia pushes an update. Post only if your Red Magic Mars patch level is updated.)
I'm on November 1 2018
Deezi74 said:
I'm on November 1 2018
Click to expand...
Click to collapse
Maybe I was incorrect. I thought it launched with December. I'll update the parent.
Note: I do not have the phone yet. I am just watching and hoping Nubia does security updates. My current Nubia is a Z11 mini, and that little phone never received a single OS or security update. I had to go a 3rd Party ROM to get updates (and a better OS experience for that matter). I'm in need of a new phone, and have narrowed it down to the Red Magic Mars and few others. I like that it comes with a relatively clean/stock OS. That should make it easier to do monthly or quarterly updates than a heavily skinned OS (ex. Nubia UI). The lack of past support from Nubia keeps me from pushing the "Add to cart" button.
Build number: NX619J_ENCommon_V1.07
Android security patch level: December 5, 2018
Just unboxed mine and had an update available yesterday as soon as I powered on.
cajunflavoredbob said:
Just unboxed mine and had an update available yesterday as soon as I powered on.
Click to expand...
Click to collapse
Thanks! Good to hear that they actually push updates.
cajunflavoredbob said:
Build number: NX619J_ENCommon_V1.07
Android security patch level: December 5, 2018
Just unboxed mine and had an update available yesterday as soon as I powered on.
Click to expand...
Click to collapse
Is there a way you can share the update you downloaded when
you opened the box?
Global Version 1.11 is out
It hasn't gone OTA yet, but Nubia posted v1.11 of the North America Global (stock) ROM on their website about a week ago.
You can grab it here: https://help.redmagic.gg/hc/en-us/articles/360033542691-Global-ROMs-and-Updates
I am confused?? Do I have the Global rom? I got my Red Magic Mars via the phone swap after testing the first one.
Build Number - NX619J_ENCommon_V1.08
Android 9 Security patch - December 5th
I have been looking all over trying to find out what exactly this global rom is. Is it what I already have, not the Chinese rom right? If so, does the NA one available on the website from March 25th have a later build number than NX619J_ENCommon_V1.08?
If anyone takes the time to answer before I get official response from the red magic support team It would be much appreciated. Thanks
...
I have mars since February and I've been in that version since then, but before, I had flashed the Chinese rom.
I think something does not fit ... perhaps when flashing the Chinese rom something is ruined the otas? because the update package looks like for the chinese rom?
If your led strip does only green and you have google play you have global rom... If the multi colors work for notifications then you have Chinese rom
NA Global Rom v1.08
Zombiebeaver said:
I am confused?? Do I have the Global rom? I got my Red Magic Mars via the phone swap after testing the first one.
Build Number - NX619J_ENCommon_V1.08
Android 9 Security patch - December 5th
I have been looking all over trying to find out what exactly this global rom is. Is it what I already have, not the Chinese rom right? If so, does the NA one available on the website from March 25th have a later build number than NX619J_ENCommon_V1.08?
Click to expand...
Click to collapse
I know this is an older thread, but I have the NA version, purchased direct from the na.redmagic.gg site back in March. Upon power on, I immediately got the update from version v1.07 to v1.08. Here is my build number from the settings screen:
---Version: 1.08 (Android 9)
---Build number: NX619J_Z69_EN_WPJ0O_V1.08
---Android security patch level: December 5, 2018
This is the English ROM with the Google stock UI instead of the Chinese ROM with RedMagic OS. There have been no security updates after the initial ROM patch back in March 2019.